aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorWu, Bryan <bryan.wu@analog.com>2007-05-06 14:50:34 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-05-07 12:12:58 -0700
commita5f6abd4f7558fea97bc4021fd0eb7dcc5d16a77 (patch)
treed4e8734dd087711e46074846e481457953685586
parent8cc75c9a1498913d668b6d3559940c6837cee8bf (diff)
Blackfin: blackfin on-chip SPI controller driver
This patch implements the driver necessary use the Analog Devices Blackfin processor's SPI Port. Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--drivers/spi/Kconfig7
-rw-r--r--drivers/spi/Makefile3
-rw-r--r--drivers/spi/spi_bfin5xx.c1313
3 files changed, 1321 insertions, 2 deletions
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 7e54e48efd5c..4a012d9acbff 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -58,6 +58,12 @@ config SPI_ATMEL
This selects a driver for the Atmel SPI Controller, present on
many AT32 (AVR32) and AT91 (ARM) chips.
+config SPI_BFIN
+ tristate "SPI controller driver for ADI Blackfin5xx"
+ depends on SPI_MASTER && BFIN
+ help
+ This is the SPI controller master driver for Blackfin 5xx processor.
+
config SPI_BITBANG
tristate "Bitbanging SPI master"
depends on SPI_MASTER && EXPERIMENTAL
@@ -157,7 +163,6 @@ config SPI_AT25
# Add new SPI protocol masters in alphabetical order above this line
#
-
# (slave support would go here)
endmenu # "SPI support"
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 3c280ad89202..a95ade857a2f 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -11,8 +11,9 @@ endif
obj-$(CONFIG_SPI_MASTER) += spi.o
# SPI master controller drivers (bus)
-obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o
+obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o
+obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
new file mode 100644
index 000000000000..ce3c0ce2316e
--- /dev/null
+++ b/drivers/spi/spi_bfin5xx.c
@@ -0,0 +1,1313 @@
+/*
+ * File: drivers/spi/bfin5xx_spi.c
+ * Based on: N/A
+ * Author: Luke Yang (Analog Devices Inc.)
+ *
+ * Created: March. 10th 2006
+ * Description: SPI controller driver for Blackfin 5xx
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Modified:
+ * March 10, 2006 bfin5xx_spi.c Created. (Luke Yang)
+ * August 7, 2006 added full duplex mode (Axel Weiss & Luke Yang)
+ *
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * This program is free software ; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation ; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY ; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program ; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/delay.h>
+#include <asm/dma.h>
+
+#include <asm/bfin5xx_spi.h>
+
+MODULE_AUTHOR("Luke Yang");
+MODULE_DESCRIPTION("Blackfin 5xx SPI Contoller");
+MODULE_LICENSE("GPL");
+
+#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+
+#define DEFINE_SPI_REG(reg, off) \
+static inline u16 read_##reg(void) \
+ { return *(volatile unsigned short*)(SPI0_REGBASE + off); } \
+static inline void write_##reg(u16 v) \
+ {*(volatile unsigned short*)(SPI0_REGBASE + off) = v;\
+ SSYNC();}
+
+DEFINE_SPI_REG(CTRL, 0x00)
+DEFINE_SPI_REG(FLAG, 0x04)
+DEFINE_SPI_REG(STAT, 0x08)
+DEFINE_SPI_REG(TDBR, 0x0C)
+DEFINE_SPI_REG(RDBR, 0x10)
+DEFINE_SPI_REG(BAUD, 0x14)
+DEFINE_SPI_REG(SHAW, 0x18)
+#define START_STATE ((void*)0)
+#define RUNNING_STATE ((void*)1)
+#define DONE_STATE ((void*)2)
+#define ERROR_STATE ((void*)-1)
+#define QUEUE_RUNNING 0
+#define QUEUE_STOPPED 1
+int dma_requested;
+
+struct driver_data {
+ /* Driver model hookup */
+ struct platform_device *pdev;
+
+ /* SPI framework hookup */
+ struct spi_master *master;
+
+ /* BFIN hookup */
+ struct bfin5xx_spi_master *master_info;
+
+ /* Driver message queue */
+ struct workqueue_struct *workqueue;
+ struct work_struct pump_messages;
+ spinlock_t lock;
+ struct list_head queue;
+ int busy;
+ int run;
+
+ /* Message Transfer pump */
+ struct tasklet_struct pump_transfers;
+
+ /* Current message transfer state info */
+ struct spi_message *cur_msg;
+ struct spi_transfer *cur_transfer;
+ struct chip_data *cur_chip;
+ size_t len_in_bytes;
+ size_t len;
+ void *tx;
+ void *tx_end;
+ void *rx;
+ void *rx_end;
+ int dma_mapped;
+ dma_addr_t rx_dma;
+ dma_addr_t tx_dma;
+ size_t rx_map_len;
+ size_t tx_map_len;
+ u8 n_bytes;
+ void (*write) (struct driver_data *);
+ void (*read) (struct driver_data *);
+ void (*duplex) (struct driver_data *);
+};
+
+struct chip_data {
+ u16 ctl_reg;
+ u16 baud;
+ u16 flag;
+
+ u8 chip_select_num;
+ u8 n_bytes;
+ u32 width; /* 0 or 1 */
+ u8 enable_dma;
+ u8 bits_per_word; /* 8 or 16 */
+ u8 cs_change_per_word;
+ u8 cs_chg_udelay;
+ void (*write) (struct driver_data *);
+ void (*read) (struct driver_data *);
+ void (*duplex) (struct driver_data *);
+};
+
+void bfin_spi_enable(struct driver_data *drv_data)
+{
+ u16 cr;
+
+ cr = read_CTRL();
+ write_CTRL(cr | BIT_CTL_ENABLE);
+ SSYNC();
+}
+
+void bfin_spi_disable(struct driver_data *drv_data)
+{
+ u16 cr;
+
+ cr = read_CTRL();
+ write_CTRL(cr & (~BIT_CTL_ENABLE));
+ SSYNC();
+}
+
+/* Caculate the SPI_BAUD register value based on input HZ */
+static u16 hz_to_spi_baud(u32 speed_hz)
+{
+ u_long sclk = get_sclk();
+ u16 spi_baud = (sclk / (2 * speed_hz));
+
+ if ((sclk % (2 * speed_hz)) > 0)
+ spi_baud++;
+
+ pr_debug("sclk = %ld, speed_hz = %d, spi_baud = %d\n", sclk, speed_hz,
+ spi_baud);
+
+ return spi_baud;
+}
+
+static int flush(struct driver_data *drv_data)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ /* wait for stop and clear stat */
+ while (!(read_STAT() & BIT_STAT_SPIF) && limit--)
+ continue;
+
+ write_STAT(BIT_STAT_CLR);
+
+ return limit;
+}
+
+/* stop controller and re-config current chip*/
+static void restore_state(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ /* Clear status and disable clock */
+ write_STAT(BIT_STAT_CLR);
+ bfin_spi_disable(drv_data);
+ pr_debug("restoring spi ctl state\n");
+
+#if defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
+ pr_debug("chip select number is %d\n", chip->chip_select_num);
+
+ switch (chip->chip_select_num) {
+ case 1:
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3c00);
+ SSYNC();
+ break;
+
+ case 2:
+ case 3:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJSE_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
+ SSYNC();
+ break;
+
+ case 4:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS4E_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3840);
+ SSYNC();
+ break;
+
+ case 5:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS5E_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3820);
+ SSYNC();
+ break;
+
+ case 6:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PFS6E_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3810);
+ SSYNC();
+ break;
+
+ case 7:
+ bfin_write_PORT_MUX(bfin_read_PORT_MUX() | PJCE_SPI);
+ SSYNC();
+ bfin_write_PORTF_FER(bfin_read_PORTF_FER() | 0x3800);
+ SSYNC();
+ break;
+ }
+#endif
+
+ /* Load the registers */
+ write_CTRL(chip->ctl_reg);
+ write_BAUD(chip->baud);
+ write_FLAG(chip->flag);
+}
+
+/* used to kick off transfer in rx mode */
+static unsigned short dummy_read(void)
+{
+ unsigned short tmp;
+ tmp = read_RDBR();
+ return tmp;
+}
+
+static void null_writer(struct driver_data *drv_data)
+{
+ u8 n_bytes = drv_data->n_bytes;
+
+ while (drv_data->tx < drv_data->tx_end) {
+ write_TDBR(0);
+ while ((read_STAT() & BIT_STAT_TXS))
+ continue;
+ drv_data->tx += n_bytes;
+ }
+}
+
+static void null_reader(struct driver_data *drv_data)
+{
+ u8 n_bytes = drv_data->n_bytes;
+ dummy_read();
+
+ while (drv_data->rx < drv_data->rx_end) {
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ dummy_read();
+ drv_data->rx += n_bytes;
+ }
+}
+
+static void u8_writer(struct driver_data *drv_data)
+{
+ pr_debug("cr8-s is 0x%x\n", read_STAT());
+ while (drv_data->tx < drv_data->tx_end) {
+ write_TDBR(*(u8 *) (drv_data->tx));
+ while (read_STAT() & BIT_STAT_TXS)
+ continue;
+ ++drv_data->tx;
+ }
+
+ /* poll for SPI completion before returning */
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+}
+
+static void u8_cs_chg_writer(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->tx < drv_data->tx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ write_TDBR(*(u8 *) (drv_data->tx));
+ while (read_STAT() & BIT_STAT_TXS)
+ continue;
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ ++drv_data->tx;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u8_reader(struct driver_data *drv_data)
+{
+ pr_debug("cr-8 is 0x%x\n", read_STAT());
+
+ /* clear TDBR buffer before read(else it will be shifted out) */
+ write_TDBR(0xFFFF);
+
+ dummy_read();
+
+ while (drv_data->rx < drv_data->rx_end - 1) {
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u8 *) (drv_data->rx) = read_RDBR();
+ ++drv_data->rx;
+ }
+
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u8 *) (drv_data->rx) = read_SHAW();
+ ++drv_data->rx;
+}
+
+static void u8_cs_chg_reader(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->rx < drv_data->rx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ read_RDBR(); /* kick off */
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ *(u8 *) (drv_data->rx) = read_SHAW();
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ ++drv_data->rx;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u8_duplex(struct driver_data *drv_data)
+{
+ /* in duplex mode, clk is triggered by writing of TDBR */
+ while (drv_data->rx < drv_data->rx_end) {
+ write_TDBR(*(u8 *) (drv_data->tx));
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u8 *) (drv_data->rx) = read_RDBR();
+ ++drv_data->rx;
+ ++drv_data->tx;
+ }
+}
+
+static void u8_cs_chg_duplex(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->rx < drv_data->rx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ write_TDBR(*(u8 *) (drv_data->tx));
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u8 *) (drv_data->rx) = read_RDBR();
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ ++drv_data->rx;
+ ++drv_data->tx;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u16_writer(struct driver_data *drv_data)
+{
+ pr_debug("cr16 is 0x%x\n", read_STAT());
+ while (drv_data->tx < drv_data->tx_end) {
+ write_TDBR(*(u16 *) (drv_data->tx));
+ while ((read_STAT() & BIT_STAT_TXS))
+ continue;
+ drv_data->tx += 2;
+ }
+
+ /* poll for SPI completion before returning */
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+}
+
+static void u16_cs_chg_writer(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->tx < drv_data->tx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ write_TDBR(*(u16 *) (drv_data->tx));
+ while ((read_STAT() & BIT_STAT_TXS))
+ continue;
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ drv_data->tx += 2;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u16_reader(struct driver_data *drv_data)
+{
+ pr_debug("cr-16 is 0x%x\n", read_STAT());
+ dummy_read();
+
+ while (drv_data->rx < (drv_data->rx_end - 2)) {
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u16 *) (drv_data->rx) = read_RDBR();
+ drv_data->rx += 2;
+ }
+
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u16 *) (drv_data->rx) = read_SHAW();
+ drv_data->rx += 2;
+}
+
+static void u16_cs_chg_reader(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->rx < drv_data->rx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ read_RDBR(); /* kick off */
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ *(u16 *) (drv_data->rx) = read_SHAW();
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ drv_data->rx += 2;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+static void u16_duplex(struct driver_data *drv_data)
+{
+ /* in duplex mode, clk is triggered by writing of TDBR */
+ while (drv_data->tx < drv_data->tx_end) {
+ write_TDBR(*(u16 *) (drv_data->tx));
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u16 *) (drv_data->rx) = read_RDBR();
+ drv_data->rx += 2;
+ drv_data->tx += 2;
+ }
+}
+
+static void u16_cs_chg_duplex(struct driver_data *drv_data)
+{
+ struct chip_data *chip = drv_data->cur_chip;
+
+ while (drv_data->tx < drv_data->tx_end) {
+ write_FLAG(chip->flag);
+ SSYNC();
+
+ write_TDBR(*(u16 *) (drv_data->tx));
+ while (!(read_STAT() & BIT_STAT_SPIF))
+ continue;
+ while (!(read_STAT() & BIT_STAT_RXS))
+ continue;
+ *(u16 *) (drv_data->rx) = read_RDBR();
+ write_FLAG(0xFF00 | chip->flag);
+ SSYNC();
+ if (chip->cs_chg_udelay)
+ udelay(chip->cs_chg_udelay);
+ drv_data->rx += 2;
+ drv_data->tx += 2;
+ }
+ write_FLAG(0xFF00);
+ SSYNC();
+}
+
+/* test if ther is more transfer to be done */
+static void *next_transfer(struct driver_data *drv_data)
+{
+ struct spi_message *msg = drv_data->cur_msg;
+ struct spi_transfer *trans = drv_data->cur_transfer;
+
+ /* Move to next transfer */
+ if (trans->transfer_list.next != &msg->transfers) {
+ drv_data->cur_transfer =
+ list_entry(trans->transfer_list.next,
+ struct spi_transfer, transfer_list);
+ return RUNNING_STATE;
+ } else
+ return DONE_STATE;
+}
+
+/*
+ * caller already set message->status;
+ * dma and pio irqs are blocked give finished message back
+ */
+static void giveback(struct driver_data *drv_data)
+{
+ struct spi_transfer *last_transfer;
+ unsigned long flags;
+ struct spi_message *msg;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+ msg = drv_data->cur_msg;
+ drv_data->cur_msg = NULL;
+ drv_data->cur_transfer = NULL;
+ drv_data->cur_chip = NULL;
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ last_transfer = list_entry(msg->transfers.prev,
+ struct spi_transfer, transfer_list);
+
+ msg->state = NULL;
+
+ /* disable chip select signal. And not stop spi in autobuffer mode */
+ if (drv_data->tx_dma != 0xFFFF) {
+ write_FLAG(0xFF00);
+ bfin_spi_disable(drv_data);
+ }
+
+ if (msg->complete)
+ msg->complete(msg->context);
+}
+
+static irqreturn_t dma_irq_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct driver_data *drv_data = (struct driver_data *)dev_id;
+ struct spi_message *msg = drv_data->cur_msg;
+
+ pr_debug("in dma_irq_handler\n");
+ clear_dma_irqstat(CH_SPI);
+
+ /*
+ * wait for the last transaction shifted out. yes, these two
+ * while loops are supposed to be the same (see the HRM).
+ */
+ if (drv_data->tx != NULL) {
+ while (bfin_read_SPI_STAT() & TXS)
+ continue;
+ while (bfin_read_SPI_STAT() & TXS)
+ continue;
+ }
+
+ while (!(bfin_read_SPI_STAT() & SPIF))
+ continue;
+
+ bfin_spi_disable(drv_data);
+
+ msg->actual_length += drv_data->len_in_bytes;
+
+ /* Move to next transfer */
+ msg->state = next_transfer(drv_data);
+
+ /* Schedule transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ /* free the irq handler before next transfer */
+ pr_debug("disable dma channel irq%d\n", CH_SPI);
+ dma_disable_irq(CH_SPI);
+
+ return IRQ_HANDLED;
+}
+
+static void pump_transfers(unsigned long data)
+{
+ struct driver_data *drv_data = (struct driver_data *)data;
+ struct spi_message *message = NULL;
+ struct spi_transfer *transfer = NULL;
+ struct spi_transfer *previous = NULL;
+ struct chip_data *chip = NULL;
+ u16 cr, width, dma_width, dma_config;
+ u32 tranf_success = 1;
+
+ /* Get current state information */
+ message = drv_data->cur_msg;
+ transfer = drv_data->cur_transfer;
+ chip = drv_data->cur_chip;
+
+ /*
+ * if msg is error or done, report it back using complete() callback
+ */
+
+ /* Handle for abort */
+ if (message->state == ERROR_STATE) {
+ message->status = -EIO;
+ giveback(drv_data);
+ return;
+ }
+
+ /* Handle end of message */
+ if (message->state == DONE_STATE) {
+ message->status = 0;
+ giveback(drv_data);
+ return;
+ }
+
+ /* Delay if requested at end of transfer */
+ if (message->state == RUNNING_STATE) {
+ previous = list_entry(transfer->transfer_list.prev,
+ struct spi_transfer, transfer_list);
+ if (previous->delay_usecs)
+ udelay(previous->delay_usecs);
+ }
+
+ /* Setup the transfer state based on the type of transfer */
+ if (flush(drv_data) == 0) {
+ dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n");
+ message->status = -EIO;
+ giveback(drv_data);
+ return;
+ }
+
+ if (transfer->tx_buf != NULL) {
+ drv_data->tx = (void *)transfer->tx_buf;
+ drv_data->tx_end = drv_data->tx + transfer->len;
+ pr_debug("tx_buf is %p, tx_end is %p\n", transfer->tx_buf,
+ drv_data->tx_end);
+ } else {
+ drv_data->tx = NULL;
+ }
+
+ if (transfer->rx_buf != NULL) {
+ drv_data->rx = transfer->rx_buf;
+ drv_data->rx_end = drv_data->rx + transfer->len;
+ pr_debug("rx_buf is %p, rx_end is %p\n", transfer->rx_buf,
+ drv_data->rx_end);
+ } else {
+ drv_data->rx = NULL;
+ }
+
+ drv_data->rx_dma = transfer->rx_dma;
+ drv_data->tx_dma = transfer->tx_dma;
+ drv_data->len_in_bytes = transfer->len;
+
+ width = chip->width;
+ if (width == CFG_SPI_WORDSIZE16) {
+ drv_data->len = (transfer->len) >> 1;
+ } else {
+ drv_data->len = transfer->len;
+ }
+ drv_data->write = drv_data->tx ? chip->write : null_writer;
+ drv_data->read = drv_data->rx ? chip->read : null_reader;
+ drv_data->duplex = chip->duplex ? chip->duplex : null_writer;
+ pr_debug
+ ("transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n",
+ drv_data->write, chip->write, null_writer);
+
+ /* speed and width has been set on per message */
+ message->state = RUNNING_STATE;
+ dma_config = 0;
+
+ /* restore spi status for each spi transfer */
+ if (transfer->speed_hz) {
+ write_BAUD(hz_to_spi_baud(transfer->speed_hz));
+ } else {
+ write_BAUD(chip->baud);
+ }
+ write_FLAG(chip->flag);
+
+ pr_debug("now pumping a transfer: width is %d, len is %d\n", width,
+ transfer->len);
+
+ /*
+ * Try to map dma buffer and do a dma transfer if
+ * successful use different way to r/w according to
+ * drv_data->cur_chip->enable_dma
+ */
+ if (drv_data->cur_chip->enable_dma && drv_data->len > 6) {
+
+ write_STAT(BIT_STAT_CLR);
+ disable_dma(CH_SPI);
+ clear_dma_irqstat(CH_SPI);
+ bfin_spi_disable(drv_data);
+
+ /* config dma channel */
+ pr_debug("doing dma transfer\n");
+ if (width == CFG_SPI_WORDSIZE16) {
+ set_dma_x_count(CH_SPI, drv_data->len);
+ set_dma_x_modify(CH_SPI, 2);
+ dma_width = WDSIZE_16;
+ } else {
+ set_dma_x_count(CH_SPI, drv_data->len);
+ set_dma_x_modify(CH_SPI, 1);
+ dma_width = WDSIZE_8;
+ }
+
+ /* set transfer width,direction. And enable spi */
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD));
+
+ /* dirty hack for autobuffer DMA mode */
+ if (drv_data->tx_dma == 0xFFFF) {
+ pr_debug("doing autobuffer DMA out.\n");
+
+ /* no irq in autobuffer mode */
+ dma_config =
+ (DMAFLOW_AUTO | RESTART | dma_width | DI_EN);
+ set_dma_config(CH_SPI, dma_config);
+ set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
+ enable_dma(CH_SPI);
+ write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
+ (CFG_SPI_ENABLE << 14));
+
+ /* just return here, there can only be one transfer in this mode */
+ message->status = 0;
+ giveback(drv_data);
+ return;
+ }
+
+ /* In dma mode, rx or tx must be NULL in one transfer */
+ if (drv_data->rx != NULL) {
+ /* set transfer mode, and enable SPI */
+ pr_debug("doing DMA in.\n");
+
+ /* disable SPI before write to TDBR */
+ write_CTRL(cr & ~BIT_CTL_ENABLE);
+
+ /* clear tx reg soformer data is not shifted out */
+ write_TDBR(0xFF);
+
+ set_dma_x_count(CH_SPI, drv_data->len);
+
+ /* start dma */
+ dma_enable_irq(CH_SPI);
+ dma_config = (WNR | RESTART | dma_width | DI_EN);
+ set_dma_config(CH_SPI, dma_config);
+ set_dma_start_addr(CH_SPI, (unsigned long)drv_data->rx);
+ enable_dma(CH_SPI);
+
+ cr |=
+ CFG_SPI_DMAREAD | (width << 8) | (CFG_SPI_ENABLE <<
+ 14);
+ /* set transfer mode, and enable SPI */
+ write_CTRL(cr);
+ } else if (drv_data->tx != NULL) {
+ pr_debug("doing DMA out.\n");
+
+ /* start dma */
+ dma_enable_irq(CH_SPI);
+ dma_config = (RESTART | dma_width | DI_EN);
+ set_dma_config(CH_SPI, dma_config);
+ set_dma_start_addr(CH_SPI, (unsigned long)drv_data->tx);
+ enable_dma(CH_SPI);
+
+ write_CTRL(cr | CFG_SPI_DMAWRITE | (width << 8) |
+ (CFG_SPI_ENABLE << 14));
+
+ }
+ } else {
+ /* IO mode write then read */
+ pr_debug("doing IO transfer\n");
+
+ write_STAT(BIT_STAT_CLR);
+
+ if (drv_data->tx != NULL && drv_data->rx != NULL) {
+ /* full duplex mode */
+ BUG_ON((drv_data->tx_end - drv_data->tx) !=
+ (drv_data->rx_end - drv_data->rx));
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* clear the TIMOD bits */
+ cr |=
+ CFG_SPI_WRITE | (width << 8) | (CFG_SPI_ENABLE <<
+ 14);
+ pr_debug("IO duplex: cr is 0x%x\n", cr);
+
+ write_CTRL(cr);
+ SSYNC();
+
+ drv_data->duplex(drv_data);
+
+ if (drv_data->tx != drv_data->tx_end)
+ tranf_success = 0;
+ } else if (drv_data->tx != NULL) {
+ /* write only half duplex */
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* clear the TIMOD bits */
+ cr |=
+ CFG_SPI_WRITE | (width << 8) | (CFG_SPI_ENABLE <<
+ 14);
+ pr_debug("IO write: cr is 0x%x\n", cr);
+
+ write_CTRL(cr);
+ SSYNC();
+
+ drv_data->write(drv_data);
+
+ if (drv_data->tx != drv_data->tx_end)
+ tranf_success = 0;
+ } else if (drv_data->rx != NULL) {
+ /* read only half duplex */
+ cr = (read_CTRL() & (~BIT_CTL_TIMOD)); /* cleare the TIMOD bits */
+ cr |=
+ CFG_SPI_READ | (width << 8) | (CFG_SPI_ENABLE <<
+ 14);
+ pr_debug("IO read: cr is 0x%x\n", cr);
+
+ write_CTRL(cr);
+ SSYNC();
+
+ drv_data->read(drv_data);
+ if (drv_data->rx != drv_data->rx_end)
+ tranf_success = 0;
+ }
+
+ if (!tranf_success) {
+ pr_debug("IO write error!\n");
+ message->state = ERROR_STATE;
+ } else {
+ /* Update total byte transfered */
+ message->actual_length += drv_data->len;
+
+ /* Move to next transfer of this msg */
+ message->state = next_transfer(drv_data);
+ }
+
+ /* Schedule next transfer tasklet */
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ }
+}
+
+/* pop a msg from queue and kick off real transfer */
+static void pump_messages(struct work_struct *work)
+{
+ struct driver_data *drv_data = container_of(work, struct driver_data, pump_messages);
+ unsigned long flags;
+
+ /* Lock queue and check for queue work */
+ spin_lock_irqsave(&drv_data->lock, flags);
+ if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
+ /* pumper kicked off but no work to do */
+ drv_data->busy = 0;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return;
+ }
+
+ /* Make sure we are not already running a message */
+ if (drv_data->cur_msg) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return;
+ }
+
+ /* Extract head of queue */
+ drv_data->cur_msg = list_entry(drv_data->queue.next,
+ struct spi_message, queue);
+ list_del_init(&drv_data->cur_msg->queue);
+
+ /* Initial message state */
+ drv_data->cur_msg->state = START_STATE;
+ drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
+ struct spi_transfer, transfer_list);
+
+ /* Setup the SSP using the per chip configuration */
+ drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi);
+ restore_state(drv_data);
+ pr_debug
+ ("got a message to pump, state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
+ drv_data->cur_chip->baud, drv_data->cur_chip->flag,
+ drv_data->cur_chip->ctl_reg);
+ pr_debug("the first transfer len is %d\n", drv_data->cur_transfer->len);
+
+ /* Mark as busy and launch transfers */
+ tasklet_schedule(&drv_data->pump_transfers);
+
+ drv_data->busy = 1;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+}
+
+/*
+ * got a msg to transfer, queue it in drv_data->queue.
+ * And kick off message pumper
+ */
+static int transfer(struct spi_device *spi, struct spi_message *msg)
+{
+ struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+
+ if (drv_data->run == QUEUE_STOPPED) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return -ESHUTDOWN;
+ }
+
+ msg->actual_length = 0;
+ msg->status = -EINPROGRESS;
+ msg->state = START_STATE;
+
+ pr_debug("adding an msg in transfer() \n");
+ list_add_tail(&msg->queue, &drv_data->queue);
+
+ if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ return 0;
+}
+
+/* first setup for new devices */
+static int setup(struct spi_device *spi)
+{
+ struct bfin5xx_spi_chip *chip_info = NULL;
+ struct chip_data *chip;
+ struct driver_data *drv_data = spi_master_get_devdata(spi->master);
+ u8 spi_flg;
+
+ /* Abort device setup if requested features are not supported */
+ if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
+ dev_err(&spi->dev, "requested mode not fully supported\n");
+ return -EINVAL;
+ }
+
+ /* Zero (the default) here means 8 bits */
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
+ return -EINVAL;
+
+ /* Only alloc (or use chip_info) on first setup */
+ chip = spi_get_ctldata(spi);
+ if (chip == NULL) {
+ chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->enable_dma = 0;
+ chip_info = spi->controller_data;
+ }
+
+ /* chip_info isn't always needed */
+ if (chip_info) {
+ chip->enable_dma = chip_info->enable_dma != 0
+ && drv_data->master_info->enable_dma;
+ chip->ctl_reg = chip_info->ctl_reg;
+ chip->bits_per_word = chip_info->bits_per_word;
+ chip->cs_change_per_word = chip_info->cs_change_per_word;
+ chip->cs_chg_udelay = chip_info->cs_chg_udelay;
+ }
+
+ /* translate common spi framework into our register */
+ if (spi->mode & SPI_CPOL)
+ chip->ctl_reg |= CPOL;
+ if (spi->mode & SPI_CPHA)
+ chip->ctl_reg |= CPHA;
+ if (spi->mode & SPI_LSB_FIRST)
+ chip->ctl_reg |= LSBF;
+ /* we dont support running in slave mode (yet?) */
+ chip->ctl_reg |= MSTR;
+
+ /*
+ * if any one SPI chip is registered and wants DMA, request the
+ * DMA channel for it
+ */
+ if (chip->enable_dma && !dma_requested) {
+ /* register dma irq handler */
+ if (request_dma(CH_SPI, "BF53x_SPI_DMA") < 0) {
+ pr_debug
+ ("Unable to request BlackFin SPI DMA channel\n");
+ return -ENODEV;
+ }
+ if (set_dma_callback(CH_SPI, (void *)dma_irq_handler, drv_data)
+ < 0) {
+ pr_debug("Unable to set dma callback\n");
+ return -EPERM;
+ }
+ dma_disable_irq(CH_SPI);
+ dma_requested = 1;
+ }
+
+ /*
+ * Notice: for blackfin, the speed_hz is the value of register
+ * SPI_BAUD, not the real baudrate
+ */
+ chip->baud = hz_to_spi_baud(spi->max_speed_hz);
+ spi_flg = ~(1 << (spi->chip_select));
+ chip->flag = ((u16) spi_flg << 8) | (1 << (spi->chip_select));
+ chip->chip_select_num = spi->chip_select;
+
+ switch (chip->bits_per_word) {
+ case 8:
+ chip->n_bytes = 1;
+ chip->width = CFG_SPI_WORDSIZE8;
+ chip->read = chip->cs_change_per_word ?
+ u8_cs_chg_reader : u8_reader;
+ chip->write = chip->cs_change_per_word ?
+ u8_cs_chg_writer : u8_writer;
+ chip->duplex = chip->cs_change_per_word ?
+ u8_cs_chg_duplex : u8_duplex;
+ break;
+
+ case 16:
+ chip->n_bytes = 2;
+ chip->width = CFG_SPI_WORDSIZE16;
+ chip->read = chip->cs_change_per_word ?
+ u16_cs_chg_reader : u16_reader;
+ chip->write = chip->cs_change_per_word ?
+ u16_cs_chg_writer : u16_writer;
+ chip->duplex = chip->cs_change_per_word ?
+ u16_cs_chg_duplex : u16_duplex;
+ break;
+
+ default:
+ dev_err(&spi->dev, "%d bits_per_word is not supported\n",
+ chip->bits_per_word);
+ kfree(chip);
+ return -ENODEV;
+ }
+
+ pr_debug("setup spi chip %s, width is %d, dma is %d,",
+ spi->modalias, chip->width, chip->enable_dma);
+ pr_debug("ctl_reg is 0x%x, flag_reg is 0x%x\n",
+ chip->ctl_reg, chip->flag);
+
+ spi_set_ctldata(spi, chip);
+
+ return 0;
+}
+
+/*
+ * callback for spi framework.
+ * clean driver specific data
+ */
+static void cleanup(const struct spi_device *spi)
+{
+ struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
+
+ kfree(chip);
+}
+
+static inline int init_queue(struct driver_data *drv_data)
+{
+ INIT_LIST_HEAD(&drv_data->queue);
+ spin_lock_init(&drv_data->lock);
+
+ drv_data->run = QUEUE_STOPPED;
+ drv_data->busy = 0;
+
+ /* init transfer tasklet */
+ tasklet_init(&drv_data->pump_transfers,
+ pump_transfers, (unsigned long)drv_data);
+
+ /* init messages workqueue */
+ INIT_WORK(&drv_data->pump_messages, pump_messages);
+ drv_data->workqueue =
+ create_singlethread_workqueue(drv_data->master->cdev.dev->bus_id);
+ if (drv_data->workqueue == NULL)
+ return -EBUSY;
+
+ return 0;
+}
+
+static inline int start_queue(struct driver_data *drv_data)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+
+ if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ return -EBUSY;
+ }
+
+ drv_data->run = QUEUE_RUNNING;
+ drv_data->cur_msg = NULL;
+ drv_data->cur_transfer = NULL;
+ drv_data->cur_chip = NULL;
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ queue_work(drv_data->workqueue, &drv_data->pump_messages);
+
+ return 0;
+}
+
+static inline int stop_queue(struct driver_data *drv_data)
+{
+ unsigned long flags;
+ unsigned limit = 500;
+ int status = 0;
+
+ spin_lock_irqsave(&drv_data->lock, flags);
+
+ /*
+ * This is a bit lame, but is optimized for the common execution path.
+ * A wait_queue on the drv_data->busy could be used, but then the common
+ * execution path (pump_messages) would be required to call wake_up or
+ * friends on every SPI message. Do this instead
+ */
+ drv_data->run = QUEUE_STOPPED;
+ while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) {
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&drv_data->lock, flags);
+ }
+
+ if (!list_empty(&drv_data->queue) || drv_data->busy)
+ status = -EBUSY;
+
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ return status;
+}
+
+static inline int destroy_queue(struct driver_data *drv_data)
+{
+ int status;
+
+ status = stop_queue(drv_data);
+ if (status != 0)
+ return status;
+
+ destroy_workqueue(drv_data->workqueue);
+
+ return 0;
+}
+
+static int __init bfin5xx_spi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bfin5xx_spi_master *platform_info;
+ struct spi_master *master;
+ struct driver_data *drv_data = 0;
+ int status = 0;
+
+ platform_info = dev->platform_data;
+
+ /* Allocate master with space for drv_data */
+ master = spi_alloc_master(dev, sizeof(struct driver_data) + 16);
+ if (!master) {
+ dev_err(&pdev->dev, "can not alloc spi_master\n");
+ return -ENOMEM;
+ }
+ drv_data = spi_master_get_devdata(master);
+ drv_data->master = master;
+ drv_data->master_info = platform_info;
+ drv_data->pdev = pdev;
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = platform_info->num_chipselect;
+ master->cleanup = cleanup;
+ master->setup = setup;
+ master->transfer = transfer;
+
+ /* Initial and start queue */
+ status = init_queue(drv_data);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem initializing queue\n");
+ goto out_error_queue_alloc;
+ }
+ status = start_queue(drv_data);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem starting queue\n");
+ goto out_error_queue_alloc;
+ }
+
+ /* Register with the SPI framework */
+ platform_set_drvdata(pdev, drv_data);
+ status = spi_register_master(master);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem registering spi master\n");
+ goto out_error_queue_alloc;
+ }
+ pr_debug("controller probe successfully\n");
+ return status;
+
+ out_error_queue_alloc:
+ destroy_queue(drv_data);
+ spi_master_put(master);
+ return status;
+}
+
+/* stop hardware and remove the driver */
+static int __devexit bfin5xx_spi_remove(struct platform_device *pdev)
+{
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
+ int status = 0;
+
+ if (!drv_data)
+ return 0;
+
+ /* Remove the queue */
+ status = destroy_queue(drv_data);
+ if (status != 0)
+ return status;
+
+ /* Disable the SSP at the peripheral and SOC level */
+ bfin_spi_disable(drv_data);
+
+ /* Release DMA */
+ if (drv_data->master_info->enable_dma) {
+ if (dma_channel_active(CH_SPI))
+ free_dma(CH_SPI);
+ }
+
+ /* Disconnect from the SPI framework */
+ spi_unregister_master(drv_data->master);
+
+ /* Prevent double remove */
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin5xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
+ int status = 0;
+
+ status = stop_queue(drv_data);
+ if (status != 0)
+ return status;
+
+ /* stop hardware */
+ bfin_spi_disable(drv_data);
+
+ return 0;
+}
+
+static int bfin5xx_spi_resume(struct platform_device *pdev)
+{
+ struct driver_data *drv_data = platform_get_drvdata(pdev);
+ int status = 0;
+
+ /* Enable the SPI interface */
+ bfin_spi_enable(drv_data);
+
+ /* Start the queue running */
+ status = start_queue(drv_data);
+ if (status != 0) {
+ dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+ return status;
+ }
+
+ return 0;
+}
+#else
+#define bfin5xx_spi_suspend NULL
+#define bfin5xx_spi_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver bfin5xx_spi_driver = {
+ .driver = {
+ .name = "bfin-spi-master",
+ .bus = &platform_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = bfin5xx_spi_probe,
+ .remove = __devexit_p(bfin5xx_spi_remove),
+ .suspend = bfin5xx_spi_suspend,
+ .resume = bfin5xx_spi_resume,
+};
+
+static int __init bfin5xx_spi_init(void)
+{
+ return platform_driver_register(&bfin5xx_spi_driver);
+}
+
+module_init(bfin5xx_spi_init);
+
+static void __exit bfin5xx_spi_exit(void)
+{
+ platform_driver_unregister(&bfin5xx_spi_driver);
+}
+
+module_exit(bfin5xx_spi_exit);

Privacy Policy