path: root/Documentation/powerpc
diff options
authorJulie Zhu <julie.zhu@xilinx.com>2009-09-21 22:08:19 (GMT)
committerGreg Kroah-Hartman <gregkh@suse.de>2009-12-11 19:55:13 (GMT)
commit08d3c18e6674c5d46e4333a462b1e2e4c4ded1d4 (patch)
tree2efb48ceb2b86784b1966d696bd38c03a71ab7a4 /Documentation/powerpc
parent9eb66f71318df6ab73bad2fb924a36777cf0220e (diff)
USB: Add support for Xilinx USB host controller
Add bus glue driver for Xilinx USB host controller. The controller can be configured as HS only or HS/FS hybrid. The driver uses the device tree file to configure the driver according to the setting in the hardware system. This driver has been tested with usbtest using the NET2280 PCI card. Signed-off-by: Julie Zhu <julie.zhu@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'Documentation/powerpc')
1 files changed, 11 insertions, 0 deletions
diff --git a/Documentation/powerpc/dts-bindings/xilinx.txt b/Documentation/powerpc/dts-bindings/xilinx.txt
index 80339fe..ea68046 100644
--- a/Documentation/powerpc/dts-bindings/xilinx.txt
+++ b/Documentation/powerpc/dts-bindings/xilinx.txt
@@ -292,4 +292,15 @@
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required
+ vii) Xilinx USB Host controller
+ The Xilinx USB host controller is EHCI compatible but with a different
+ base address for the EHCI registers, and it is always a big-endian
+ USB Host controller. The hardware can be configured as high speed only,
+ or high speed/full speed hybrid.
+ Required properties:
+ - xlnx,support-usb-fs: A value 0 means the core is built as high speed
+ only. A value 1 means the core also supports
+ full speed devices.

Privacy Policy