aboutsummaryrefslogtreecommitdiffstats
path: root/arch/xtensa/boot/include/zlib.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/xtensa/boot/include/zlib.h')
-rw-r--r--arch/xtensa/boot/include/zlib.h433
1 files changed, 433 insertions, 0 deletions
diff --git a/arch/xtensa/boot/include/zlib.h b/arch/xtensa/boot/include/zlib.h
new file mode 100644
index 000000000000..ea29b6237852
--- /dev/null
+++ b/arch/xtensa/boot/include/zlib.h
@@ -0,0 +1,433 @@
+/*
+ * BK Id: SCCS/s.zlib.h 1.8 05/18/01 15:17:23 cort
+ */
+/*
+ * This file is derived from zlib.h and zconf.h from the zlib-0.95
+ * distribution by Jean-loup Gailly and Mark Adler, with some additions
+ * by Paul Mackerras to aid in implementing Deflate compression and
+ * decompression for PPP packets.
+ */
+
+/*
+ * ==FILEVERSION 960122==
+ *
+ * This marker is used by the Linux installation script to determine
+ * whether an up-to-date version of this file is already installed.
+ */
+
+/* zlib.h -- interface of the 'zlib' general purpose compression library
+ version 0.95, Aug 16th, 1995.
+
+ Copyright (C) 1995 Jean-loup Gailly and Mark Adler
+
+ This software is provided 'as-is', without any express or implied
+ warranty. In no event will the authors be held liable for any damages
+ arising from the use of this software.
+
+ Permission is granted to anyone to use this software for any purpose,
+ including commercial applications, and to alter it and redistribute it
+ freely, subject to the following restrictions:
+
+ 1. The origin of this software must not be misrepresented; you must not
+ claim that you wrote the original software. If you use this software
+ in a product, an acknowledgment in the product documentation would be
+ appreciated but is not required.
+ 2. Altered source versions must be plainly marked as such, and must not be
+ misrepresented as being the original software.
+ 3. This notice may not be removed or altered from any source distribution.
+
+ Jean-loup Gailly Mark Adler
+ gzip@prep.ai.mit.edu madler@alumni.caltech.edu
+ */
+
+#ifndef _ZLIB_H
+#define _ZLIB_H
+
+/* #include "zconf.h" */ /* included directly here */
+
+/* zconf.h -- configuration of the zlib compression library
+ * Copyright (C) 1995 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
+
+/*
+ The library does not install any signal handler. It is recommended to
+ add at least a handler for SIGSEGV when decompressing; the library checks
+ the consistency of the input data whenever possible but may go nuts
+ for some forms of corrupted input.
+ */
+
+/*
+ * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
+ * than 64k bytes at a time (needed on systems with 16-bit int).
+ * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
+ * at addresses which are not a multiple of their size.
+ * Under DOS, -DFAR=far or -DFAR=__far may be needed.
+ */
+
+#ifndef STDC
+# if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
+# define STDC
+# endif
+#endif
+
+#ifdef __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
+# include <unix.h>
+#endif
+
+/* Maximum value for memLevel in deflateInit2 */
+#ifndef MAX_MEM_LEVEL
+# ifdef MAXSEG_64K
+# define MAX_MEM_LEVEL 8
+# else
+# define MAX_MEM_LEVEL 9
+# endif
+#endif
+
+#ifndef FAR
+# define FAR
+#endif
+
+/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
+#ifndef MAX_WBITS
+# define MAX_WBITS 15 /* 32K LZ77 window */
+#endif
+
+/* The memory requirements for deflate are (in bytes):
+ 1 << (windowBits+2) + 1 << (memLevel+9)
+ that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values)
+ plus a few kilobytes for small objects. For example, if you want to reduce
+ the default memory requirements from 256K to 128K, compile with
+ make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
+ Of course this will generally degrade compression (there's no free lunch).
+
+ The memory requirements for inflate are (in bytes) 1 << windowBits
+ that is, 32K for windowBits=15 (default value) plus a few kilobytes
+ for small objects.
+*/
+
+ /* Type declarations */
+
+#ifndef OF /* function prototypes */
+# ifdef STDC
+# define OF(args) args
+# else
+# define OF(args) ()
+# endif
+#endif
+
+typedef unsigned char Byte; /* 8 bits */
+typedef unsigned int uInt; /* 16 bits or more */
+typedef unsigned long uLong; /* 32 bits or more */
+
+typedef Byte FAR Bytef;
+typedef char FAR charf;
+typedef int FAR intf;
+typedef uInt FAR uIntf;
+typedef uLong FAR uLongf;
+
+#ifdef STDC
+ typedef void FAR *voidpf;
+ typedef void *voidp;
+#else
+ typedef Byte FAR *voidpf;
+ typedef Byte *voidp;
+#endif
+
+/* end of original zconf.h */
+
+#define ZLIB_VERSION "0.95P"
+
+/*
+ The 'zlib' compression library provides in-memory compression and
+ decompression functions, including integrity checks of the uncompressed
+ data. This version of the library supports only one compression method
+ (deflation) but other algorithms may be added later and will have the same
+ stream interface.
+
+ For compression the application must provide the output buffer and
+ may optionally provide the input buffer for optimization. For decompression,
+ the application must provide the input buffer and may optionally provide
+ the output buffer for optimization.
+
+ Compression can be done in a single step if the buffers are large
+ enough (for example if an input file is mmap'ed), or can be done by
+ repeated calls of the compression function. In the latter case, the
+ application must provide more input and/or consume the output
+ (providing more output space) before each call.
+*/
+
+typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
+typedef void (*free_func) OF((voidpf opaque, voidpf address, uInt nbytes));
+
+struct internal_state;
+
+typedef struct z_stream_s {
+ Bytef *next_in; /* next input byte */
+ uInt avail_in; /* number of bytes available at next_in */
+ uLong total_in; /* total nb of input bytes read so far */
+
+ Bytef *next_out; /* next output byte should be put there */
+ uInt avail_out; /* remaining free space at next_out */
+ uLong total_out; /* total nb of bytes output so far */
+
+ char *msg; /* last error message, NULL if no error */
+ struct internal_state FAR *state; /* not visible by applications */
+
+ alloc_func zalloc; /* used to allocate the internal state */
+ free_func zfree; /* used to free the internal state */
+ voidp opaque; /* private data object passed to zalloc and zfree */
+
+ Byte data_type; /* best guess about the data type: ascii or binary */
+
+} z_stream;
+
+/*
+ The application must update next_in and avail_in when avail_in has
+ dropped to zero. It must update next_out and avail_out when avail_out
+ has dropped to zero. The application must initialize zalloc, zfree and
+ opaque before calling the init function. All other fields are set by the
+ compression library and must not be updated by the application.
+
+ The opaque value provided by the application will be passed as the first
+ parameter for calls of zalloc and zfree. This can be useful for custom
+ memory management. The compression library attaches no meaning to the
+ opaque value.
+
+ zalloc must return Z_NULL if there is not enough memory for the object.
+ On 16-bit systems, the functions zalloc and zfree must be able to allocate
+ exactly 65536 bytes, but will not be required to allocate more than this
+ if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
+ pointers returned by zalloc for objects of exactly 65536 bytes *must*
+ have their offset normalized to zero. The default allocation function
+ provided by this library ensures this (see zutil.c). To reduce memory
+ requirements and avoid any allocation of 64K objects, at the expense of
+ compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
+
+ The fields total_in and total_out can be used for statistics or
+ progress reports. After compression, total_in holds the total size of
+ the uncompressed data and may be saved for use in the decompressor
+ (particularly if the decompressor wants to decompress everything in
+ a single step).
+*/
+
+ /* constants */
+
+#define Z_NO_FLUSH 0
+#define Z_PARTIAL_FLUSH 1
+#define Z_FULL_FLUSH 2
+#define Z_SYNC_FLUSH 3 /* experimental: partial_flush + byte align */
+#define Z_FINISH 4
+#define Z_PACKET_FLUSH 5
+/* See deflate() below for the usage of these constants */
+
+#define Z_OK 0
+#define Z_STREAM_END 1
+#define Z_ERRNO (-1)
+#define Z_STREAM_ERROR (-2)
+#define Z_DATA_ERROR (-3)
+#define Z_MEM_ERROR (-4)
+#define Z_BUF_ERROR (-5)
+/* error codes for the compression/decompression functions */
+
+#define Z_BEST_SPEED 1
+#define Z_BEST_COMPRESSION 9
+#define Z_DEFAULT_COMPRESSION (-1)
+/* compression levels */
+
+#define Z_FILTERED 1
+#define Z_HUFFMAN_ONLY 2
+#define Z_DEFAULT_STRATEGY 0
+
+#define Z_BINARY 0
+#define Z_ASCII 1
+#define Z_UNKNOWN 2
+/* Used to set the data_type field */
+
+#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */
+
+extern char *zlib_version;
+/* The application can compare zlib_version and ZLIB_VERSION for consistency.
+ If the first character differs, the library code actually used is
+ not compatible with the zlib.h header file used by the application.
+ */
+
+ /* basic functions */
+
+extern int inflateInit OF((z_stream *strm));
+/*
+ Initializes the internal stream state for decompression. The fields
+ zalloc and zfree must be initialized before by the caller. If zalloc and
+ zfree are set to Z_NULL, inflateInit updates them to use default allocation
+ functions.
+
+ inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
+ enough memory. msg is set to null if there is no error message.
+ inflateInit does not perform any decompression: this will be done by
+ inflate().
+*/
+
+
+extern int inflate OF((z_stream *strm, int flush));
+/*
+ Performs one or both of the following actions:
+
+ - Decompress more input starting at next_in and update next_in and avail_in
+ accordingly. If not all input can be processed (because there is not
+ enough room in the output buffer), next_in is updated and processing
+ will resume at this point for the next call of inflate().
+
+ - Provide more output starting at next_out and update next_out and avail_out
+ accordingly. inflate() always provides as much output as possible
+ (until there is no more input data or no more space in the output buffer).
+
+ Before the call of inflate(), the application should ensure that at least
+ one of the actions is possible, by providing more input and/or consuming
+ more output, and updating the next_* and avail_* values accordingly.
+ The application can consume the uncompressed output when it wants, for
+ example when the output buffer is full (avail_out == 0), or after each
+ call of inflate().
+
+ If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
+ inflate flushes as much output as possible to the output buffer. The
+ flushing behavior of inflate is not specified for values of the flush
+ parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
+ current implementation actually flushes as much output as possible
+ anyway. For Z_PACKET_FLUSH, inflate checks that once all the input data
+ has been consumed, it is expecting to see the length field of a stored
+ block; if not, it returns Z_DATA_ERROR.
+
+ inflate() should normally be called until it returns Z_STREAM_END or an
+ error. However if all decompression is to be performed in a single step
+ (a single call of inflate), the parameter flush should be set to
+ Z_FINISH. In this case all pending input is processed and all pending
+ output is flushed; avail_out must be large enough to hold all the
+ uncompressed data. (The size of the uncompressed data may have been saved
+ by the compressor for this purpose.) The next operation on this stream must
+ be inflateEnd to deallocate the decompression state. The use of Z_FINISH
+ is never required, but can be used to inform inflate that a faster routine
+ may be used for the single inflate() call.
+
+ inflate() returns Z_OK if some progress has been made (more input
+ processed or more output produced), Z_STREAM_END if the end of the
+ compressed data has been reached and all uncompressed output has been
+ produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
+ the stream structure was inconsistent (for example if next_in or next_out
+ was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
+ progress is possible or if there was not enough room in the output buffer
+ when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
+ call inflateSync to look for a good compression block. */
+
+
+extern int inflateEnd OF((z_stream *strm));
+/*
+ All dynamically allocated data structures for this stream are freed.
+ This function discards any unprocessed input and does not flush any
+ pending output.
+
+ inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
+ was inconsistent. In the error case, msg may be set but then points to a
+ static string (which must not be deallocated).
+*/
+
+ /* advanced functions */
+
+extern int inflateInit2 OF((z_stream *strm,
+ int windowBits));
+/*
+ This is another version of inflateInit with more compression options. The
+ fields next_out, zalloc and zfree must be initialized before by the caller.
+
+ The windowBits parameter is the base two logarithm of the maximum window
+ size (the size of the history buffer). It should be in the range 8..15 for
+ this version of the library (the value 16 will be allowed soon). The
+ default value is 15 if inflateInit is used instead. If a compressed stream
+ with a larger window size is given as input, inflate() will return with
+ the error code Z_DATA_ERROR instead of trying to allocate a larger window.
+
+ If next_out is not null, the library will use this buffer for the history
+ buffer; the buffer must either be large enough to hold the entire output
+ data, or have at least 1<<windowBits bytes. If next_out is null, the
+ library will allocate its own buffer (and leave next_out null). next_in
+ need not be provided here but must be provided by the application for the
+ next call of inflate().
+
+ If the history buffer is provided by the application, next_out must
+ never be changed by the application since the decompressor maintains
+ history information inside this buffer from call to call; the application
+ can only reset next_out to the beginning of the history buffer when
+ avail_out is zero and all output has been consumed.
+
+ inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
+ not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
+ windowBits < 8). msg is set to null if there is no error message.
+ inflateInit2 does not perform any decompression: this will be done by
+ inflate().
+*/
+
+extern int inflateSync OF((z_stream *strm));
+/*
+ Skips invalid compressed data until the special marker (see deflate()
+ above) can be found, or until all available input is skipped. No output
+ is provided.
+
+ inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
+ if no more input was provided, Z_DATA_ERROR if no marker has been found,
+ or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
+ case, the application may save the current current value of total_in which
+ indicates where valid compressed data was found. In the error case, the
+ application may repeatedly call inflateSync, providing more input each time,
+ until success or end of the input data.
+*/
+
+extern int inflateReset OF((z_stream *strm));
+/*
+ This function is equivalent to inflateEnd followed by inflateInit,
+ but does not free and reallocate all the internal decompression state.
+ The stream will keep attributes that may have been set by inflateInit2.
+
+ inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent (such as zalloc or state being NULL).
+*/
+
+extern int inflateIncomp OF((z_stream *strm));
+/*
+ This function adds the data at next_in (avail_in bytes) to the output
+ history without performing any output. There must be no pending output,
+ and the decompressor must be expecting to see the start of a block.
+ Calling this function is equivalent to decompressing a stored block
+ containing the data at next_in (except that the data is not output).
+*/
+
+ /* checksum functions */
+
+/*
+ This function is not related to compression but is exported
+ anyway because it might be useful in applications using the
+ compression library.
+*/
+
+extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
+
+/*
+ Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+ return the updated checksum. If buf is NULL, this function returns
+ the required initial value for the checksum.
+ An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
+ much faster. Usage example:
+
+ uLong adler = adler32(0L, Z_NULL, 0);
+
+ while (read_buffer(buffer, length) != EOF) {
+ adler = adler32(adler, buffer, length);
+ }
+ if (adler != original_adler) error();
+*/
+
+#ifndef _Z_UTIL_H
+ struct internal_state {int dummy;}; /* hack for buggy compilers */
+#endif
+
+#endif /* _ZLIB_H */

Privacy Policy