aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/isci/remote_device.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/isci/remote_device.h')
-rw-r--r--drivers/scsi/isci/remote_device.h352
1 files changed, 352 insertions, 0 deletions
diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h
new file mode 100644
index 000000000000..57ccfc3d6ad3
--- /dev/null
+++ b/drivers/scsi/isci/remote_device.h
@@ -0,0 +1,352 @@
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ISCI_REMOTE_DEVICE_H_
+#define _ISCI_REMOTE_DEVICE_H_
+#include <scsi/libsas.h>
+#include <linux/kref.h>
+#include "scu_remote_node_context.h"
+#include "remote_node_context.h"
+#include "port.h"
+
+enum sci_remote_device_not_ready_reason_code {
+ SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED,
+ SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED,
+ SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX
+};
+
+/**
+ * isci_remote_device - isci representation of a sas expander / end point
+ * @device_port_width: hw setting for number of simultaneous connections
+ * @connection_rate: per-taskcontext connection rate for this device
+ * @working_request: SATA requests have no tag we for unaccelerated
+ * protocols we need a method to associate unsolicited
+ * frames with a pending request
+ */
+struct isci_remote_device {
+ #define IDEV_START_PENDING 0
+ #define IDEV_STOP_PENDING 1
+ #define IDEV_ALLOCATED 2
+ #define IDEV_EH 3
+ #define IDEV_GONE 4
+ #define IDEV_IO_READY 5
+ #define IDEV_IO_NCQERROR 6
+ unsigned long flags;
+ struct kref kref;
+ struct isci_port *isci_port;
+ struct domain_device *domain_dev;
+ struct list_head node;
+ struct list_head reqs_in_process;
+ struct sci_base_state_machine sm;
+ u32 device_port_width;
+ enum sas_linkrate connection_rate;
+ bool is_direct_attached;
+ struct isci_port *owning_port;
+ struct sci_remote_node_context rnc;
+ /* XXX unify with device reference counting and delete */
+ u32 started_request_count;
+ struct isci_request *working_request;
+ u32 not_ready_reason;
+};
+
+#define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000
+
+/* device reference routines must be called under sci_lock */
+static inline struct isci_remote_device *isci_lookup_device(struct domain_device *dev)
+{
+ struct isci_remote_device *idev = dev->lldd_dev;
+
+ if (idev && !test_bit(IDEV_GONE, &idev->flags)) {
+ kref_get(&idev->kref);
+ return idev;
+ }
+
+ return NULL;
+}
+
+void isci_remote_device_release(struct kref *kref);
+static inline void isci_put_device(struct isci_remote_device *idev)
+{
+ if (idev)
+ kref_put(&idev->kref, isci_remote_device_release);
+}
+
+enum sci_status isci_remote_device_stop(struct isci_host *ihost,
+ struct isci_remote_device *idev);
+void isci_remote_device_nuke_requests(struct isci_host *ihost,
+ struct isci_remote_device *idev);
+void isci_remote_device_gone(struct domain_device *domain_dev);
+int isci_remote_device_found(struct domain_device *domain_dev);
+bool isci_device_is_reset_pending(struct isci_host *ihost,
+ struct isci_remote_device *idev);
+void isci_device_clear_reset_pending(struct isci_host *ihost,
+ struct isci_remote_device *idev);
+/**
+ * sci_remote_device_stop() - This method will stop both transmission and
+ * reception of link activity for the supplied remote device. This method
+ * disables normal IO requests from flowing through to the remote device.
+ * @remote_device: This parameter specifies the device to be stopped.
+ * @timeout: This parameter specifies the number of milliseconds in which the
+ * stop operation should complete.
+ *
+ * An indication of whether the device was successfully stopped. SCI_SUCCESS
+ * This value is returned if the transmission and reception for the device was
+ * successfully stopped.
+ */
+enum sci_status sci_remote_device_stop(
+ struct isci_remote_device *idev,
+ u32 timeout);
+
+/**
+ * sci_remote_device_reset() - This method will reset the device making it
+ * ready for operation. This method must be called anytime the device is
+ * reset either through a SMP phy control or a port hard reset request.
+ * @remote_device: This parameter specifies the device to be reset.
+ *
+ * This method does not actually cause the device hardware to be reset. This
+ * method resets the software object so that it will be operational after a
+ * device hardware reset completes. An indication of whether the device reset
+ * was accepted. SCI_SUCCESS This value is returned if the device reset is
+ * started.
+ */
+enum sci_status sci_remote_device_reset(
+ struct isci_remote_device *idev);
+
+/**
+ * sci_remote_device_reset_complete() - This method informs the device object
+ * that the reset operation is complete and the device can resume operation
+ * again.
+ * @remote_device: This parameter specifies the device which is to be informed
+ * of the reset complete operation.
+ *
+ * An indication that the device is resuming operation. SCI_SUCCESS the device
+ * is resuming operation.
+ */
+enum sci_status sci_remote_device_reset_complete(
+ struct isci_remote_device *idev);
+
+/**
+ * enum sci_remote_device_states - This enumeration depicts all the states
+ * for the common remote device state machine.
+ *
+ *
+ */
+enum sci_remote_device_states {
+ /**
+ * Simply the initial state for the base remote device state machine.
+ */
+ SCI_DEV_INITIAL,
+
+ /**
+ * This state indicates that the remote device has successfully been
+ * stopped. In this state no new IO operations are permitted.
+ * This state is entered from the INITIAL state.
+ * This state is entered from the STOPPING state.
+ */
+ SCI_DEV_STOPPED,
+
+ /**
+ * This state indicates the the remote device is in the process of
+ * becoming ready (i.e. starting). In this state no new IO operations
+ * are permitted.
+ * This state is entered from the STOPPED state.
+ */
+ SCI_DEV_STARTING,
+
+ /**
+ * This state indicates the remote device is now ready. Thus, the user
+ * is able to perform IO operations on the remote device.
+ * This state is entered from the STARTING state.
+ */
+ SCI_DEV_READY,
+
+ /**
+ * This is the idle substate for the stp remote device. When there are no
+ * active IO for the device it is is in this state.
+ */
+ SCI_STP_DEV_IDLE,
+
+ /**
+ * This is the command state for for the STP remote device. This state is
+ * entered when the device is processing a non-NCQ command. The device object
+ * will fail any new start IO requests until this command is complete.
+ */
+ SCI_STP_DEV_CMD,
+
+ /**
+ * This is the NCQ state for the STP remote device. This state is entered
+ * when the device is processing an NCQ reuqest. It will remain in this state
+ * so long as there is one or more NCQ requests being processed.
+ */
+ SCI_STP_DEV_NCQ,
+
+ /**
+ * This is the NCQ error state for the STP remote device. This state is
+ * entered when an SDB error FIS is received by the device object while in the
+ * NCQ state. The device object will only accept a READ LOG command while in
+ * this state.
+ */
+ SCI_STP_DEV_NCQ_ERROR,
+
+ /**
+ * This is the READY substate indicates the device is waiting for the RESET task
+ * coming to be recovered from certain hardware specific error.
+ */
+ SCI_STP_DEV_AWAIT_RESET,
+
+ /**
+ * This is the ready operational substate for the remote device. This is the
+ * normal operational state for a remote device.
+ */
+ SCI_SMP_DEV_IDLE,
+
+ /**
+ * This is the suspended state for the remote device. This is the state that
+ * the device is placed in when a RNC suspend is received by the SCU hardware.
+ */
+ SCI_SMP_DEV_CMD,
+
+ /**
+ * This state indicates that the remote device is in the process of
+ * stopping. In this state no new IO operations are permitted, but
+ * existing IO operations are allowed to complete.
+ * This state is entered from the READY state.
+ * This state is entered from the FAILED state.
+ */
+ SCI_DEV_STOPPING,
+
+ /**
+ * This state indicates that the remote device has failed.
+ * In this state no new IO operations are permitted.
+ * This state is entered from the INITIALIZING state.
+ * This state is entered from the READY state.
+ */
+ SCI_DEV_FAILED,
+
+ /**
+ * This state indicates the device is being reset.
+ * In this state no new IO operations are permitted.
+ * This state is entered from the READY state.
+ */
+ SCI_DEV_RESETTING,
+
+ /**
+ * Simply the final state for the base remote device state machine.
+ */
+ SCI_DEV_FINAL,
+};
+
+static inline struct isci_remote_device *rnc_to_dev(struct sci_remote_node_context *rnc)
+{
+ struct isci_remote_device *idev;
+
+ idev = container_of(rnc, typeof(*idev), rnc);
+
+ return idev;
+}
+
+static inline bool dev_is_expander(struct domain_device *dev)
+{
+ return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV;
+}
+
+static inline void sci_remote_device_decrement_request_count(struct isci_remote_device *idev)
+{
+ /* XXX delete this voodoo when converting to the top-level device
+ * reference count
+ */
+ if (WARN_ONCE(idev->started_request_count == 0,
+ "%s: tried to decrement started_request_count past 0!?",
+ __func__))
+ /* pass */;
+ else
+ idev->started_request_count--;
+}
+
+enum sci_status sci_remote_device_frame_handler(
+ struct isci_remote_device *idev,
+ u32 frame_index);
+
+enum sci_status sci_remote_device_event_handler(
+ struct isci_remote_device *idev,
+ u32 event_code);
+
+enum sci_status sci_remote_device_start_io(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_status sci_remote_device_start_task(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_status sci_remote_device_complete_io(
+ struct isci_host *ihost,
+ struct isci_remote_device *idev,
+ struct isci_request *ireq);
+
+enum sci_status sci_remote_device_suspend(
+ struct isci_remote_device *idev,
+ u32 suspend_type);
+
+void sci_remote_device_post_request(
+ struct isci_remote_device *idev,
+ u32 request);
+
+#endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */

Privacy Policy