aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-07-26kernel/fork.c: fix a few coding style issuesDaniel Rebelo de Oliveira1-35/+48
Signed-off-by: Daniel Rebelo de Oliveira <psykon@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26proc: fix a race in do_io_accounting()Vasiliy Kulikov1-3/+13
If an inode's mode permits opening /proc/PID/io and the resulting file descriptor is kept across execve() of a setuid or similar binary, the ptrace_may_access() check tries to prevent using this fd against the task with escalated privileges. Unfortunately, there is a race in the check against execve(). If execve() is processed after the ptrace check, but before the actual io information gathering, io statistics will be gathered from the privileged process. At least in theory this might lead to gathering sensible information (like ssh/ftp password length) that wouldn't be available otherwise. Holding task->signal->cred_guard_mutex while gathering the io information should protect against the race. The order of locking is similar to the one inside of ptrace_attach(): first goes cred_guard_mutex, then lock_task_sighand(). Signed-off-by: Vasiliy Kulikov <segoon@openwall.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26procfs: return ENOENT on opening a being-removed proc entryDaisuke Ogino1-1/+1
Change the return value to ENOENT. This return value is then returned when opening the proc entry that have been removed. For example, open("/proc/bus/pci/XX/YY") when the corresponding device is being hot-removed. Signed-off-by: Daisuke Ogino <ogino.daisuke@jp.fujitsu.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26h8300/m68k/xtensa: __FD_ISSET should return 0/1Andrew Morton3-3/+3
Harmonise these return values with other architectures. In some cases this affects all compilers and in other cases non-gcc compilers only. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Chris Zankel <chris@zankel.net> Cc: Ulrich Drepper <drepper@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26do_coredump: fix the "ispipe" error checkOleg Nesterov1-6/+6
do_coredump() assumes that if format_corename() fails it should return -ENOMEM. This is not true, for example cn_print_exe_file() can propagate the error from d_path. Even if it was true, this is too fragile. Change the code to check "ispipe < 0". Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Reviewed-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26coredump: escape / in hostname and commJiri Slaby1-8/+23
Change every occurence of / in comm and hostname to !. If the process changes its name to contain /, the core is not dumped (if the directory tree doesn't exist like that). The same with hostname being something like myhost/3. Fix this behaviour by using the escape loop used in %E. (We extract it to a separate function.) Now both with comm == myprocess/1 and hostname == myhost/1, the core is dumped like (kernel.core_pattern='core.%p.%e.%h): core.2349.myprocess!1.myhost!1 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26coredump: use task comm instead of (unknown)Jiri Slaby1-1/+1
If we don't know the file corresponding to the binary (i.e. exe_file is unknown), use "task->comm (path unknown)" instead of simple "(unknown)" as suggested by ak. The fallback is the same as %e except it will append "(path unknown)". Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andi Kleen <andi@firstfloor.org> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26ptrace: unify show_regs() prototypeMike Frysinger21-28/+0
[ poleg@redhat.com: no need to declare show_regs() in ptrace.h, sched.h does this ] Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26cpusets: randomize node rotor used in cpuset_mem_spread_node()Michal Hocko6-1/+43
[ This patch has already been accepted as commit 0ac0c0d0f837 but later reverted (commit 35926ff5fba8) because it itroduced arch specific __node_random which was defined only for x86 code so it broke other archs. This is a followup without any arch specific code. Other than that there are no functional changes.] Some workloads that create a large number of small files tend to assign too many pages to node 0 (multi-node systems). Part of the reason is that the rotor (in cpuset_mem_spread_node()) used to assign nodes starts at node 0 for newly created tasks. This patch changes the rotor to be initialized to a random node number of the cpuset. [akpm@linux-foundation.org: fix layout] [Lee.Schermerhorn@hp.com: Define stub numa_random() for !NUMA configuration] [mhocko@suse.cz: Make it arch independent] [akpm@linux-foundation.org: fix CONFIG_NUMA=y, MAX_NUMNODES>1 build] Signed-off-by: Jack Steiner <steiner@sgi.com> Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Paul Menage <menage@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: David Rientjes <rientjes@google.com> Cc: Jack Steiner <steiner@sgi.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Menage <menage@google.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: get rid of percpu_charge_mutex lockMichal Hocko1-10/+2
percpu_charge_mutex protects from multiple simultaneous per-cpu charge caches draining because we might end up having too many work items. At least this was the case until commit 26fe61684449 ("memcg: fix percpu cached charge draining frequency") when we introduced a more targeted draining for async mode. Now that also sync draining is targeted we can safely remove mutex because we will not send more work than the current number of CPUs. FLUSHING_CACHED_CHARGE protects from sending the same work multiple times and stock->nr_pages == 0 protects from pointless sending a work if there is obviously nothing to be done. This is of course racy but we can live with it as the race window is really small (we would have to see FLUSHING_CACHED_CHARGE cleared while nr_pages would be still non-zero). The only remaining place where we can race is synchronous mode when we rely on FLUSHING_CACHED_CHARGE test which might have been set by other drainer on the same group but we should wait in that case as well. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: add mem_cgroup_same_or_subtree() helperMichal Hocko1-25/+26
We are checking whether a given two groups are same or at least in the same subtree of a hierarchy at several places. Let's make a helper for it to make code easier to read. Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: unify sync and async per-cpu charge cache drainingMichal Hocko1-14/+34
Currently we have two ways how to drain per-CPU caches for charges. drain_all_stock_sync will synchronously drain all caches while drain_all_stock_async will asynchronously drain only those that refer to a given memory cgroup or its subtree in hierarchy. Targeted async draining has been introduced by 26fe6168 (memcg: fix percpu cached charge draining frequency) to reduce the cpu workers number. sync draining is currently triggered only from mem_cgroup_force_empty which is triggered only by userspace (mem_cgroup_force_empty_write) or when a cgroup is removed (mem_cgroup_pre_destroy). Although these are not usually frequent operations it still makes some sense to do targeted draining as well, especially if the box has many CPUs. This patch unifies both methods to use the single code (drain_all_stock) which relies on the original async implementation and just adds flush_work to wait on all caches that are still under work for the sync mode. We are using FLUSHING_CACHED_CHARGE bit check to prevent from waiting on a work that we haven't triggered. Please note that both sync and async functions are currently protected by percpu_charge_mutex so we cannot race with other drainers. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: do not try to drain per-cpu caches without pagesMichal Hocko1-6/+7
drain_all_stock_async tries to optimize a work to be done on the work queue by excluding any work for the current CPU because it assumes that the context we are called from already tried to charge from that cache and it's failed so it must be empty already. While the assumption is correct we can optimize it even more by checking the current number of pages in the cache. This will also reduce a work on other CPUs with an empty stock. For the current CPU we can simply call drain_local_stock rather than deferring it to the work queue. [kamezawa.hiroyu@jp.fujitsu.com: use drain_local_stock for current CPU optimization] Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: add memory.vmscan_statKAMEZAWA Hiroyuki5-18/+303
The commit log of 0ae5e89c60c9 ("memcg: count the soft_limit reclaim in...") says it adds scanning stats to memory.stat file. But it doesn't because we considered we needed to make a concensus for such new APIs. This patch is a trial to add memory.scan_stat. This shows - the number of scanned pages(total, anon, file) - the number of rotated pages(total, anon, file) - the number of freed pages(total, anon, file) - the number of elaplsed time (including sleep/pause time) for both of direct/soft reclaim. The biggest difference with oringinal Ying's one is that this file can be reset by some write, as # echo 0 ...../memory.scan_stat Example of output is here. This is a result after make -j 6 kernel under 300M limit. [kamezawa@bluextal ~]$ cat /cgroup/memory/A/memory.scan_stat [kamezawa@bluextal ~]$ cat /cgroup/memory/A/memory.vmscan_stat scanned_pages_by_limit 9471864 scanned_anon_pages_by_limit 6640629 scanned_file_pages_by_limit 2831235 rotated_pages_by_limit 4243974 rotated_anon_pages_by_limit 3971968 rotated_file_pages_by_limit 272006 freed_pages_by_limit 2318492 freed_anon_pages_by_limit 962052 freed_file_pages_by_limit 1356440 elapsed_ns_by_limit 351386416101 scanned_pages_by_system 0 scanned_anon_pages_by_system 0 scanned_file_pages_by_system 0 rotated_pages_by_system 0 rotated_anon_pages_by_system 0 rotated_file_pages_by_system 0 freed_pages_by_system 0 freed_anon_pages_by_system 0 freed_file_pages_by_system 0 elapsed_ns_by_system 0 scanned_pages_by_limit_under_hierarchy 9471864 scanned_anon_pages_by_limit_under_hierarchy 6640629 scanned_file_pages_by_limit_under_hierarchy 2831235 rotated_pages_by_limit_under_hierarchy 4243974 rotated_anon_pages_by_limit_under_hierarchy 3971968 rotated_file_pages_by_limit_under_hierarchy 272006 freed_pages_by_limit_under_hierarchy 2318492 freed_anon_pages_by_limit_under_hierarchy 962052 freed_file_pages_by_limit_under_hierarchy 1356440 elapsed_ns_by_limit_under_hierarchy 351386416101 scanned_pages_by_system_under_hierarchy 0 scanned_anon_pages_by_system_under_hierarchy 0 scanned_file_pages_by_system_under_hierarchy 0 rotated_pages_by_system_under_hierarchy 0 rotated_anon_pages_by_system_under_hierarchy 0 rotated_file_pages_by_system_under_hierarchy 0 freed_pages_by_system_under_hierarchy 0 freed_anon_pages_by_system_under_hierarchy 0 freed_file_pages_by_system_under_hierarchy 0 elapsed_ns_by_system_under_hierarchy 0 total_xxxx is for hierarchy management. This will be useful for further memcg developments and need to be developped before we do some complicated rework on LRU/softlimit management. This patch adds a new struct memcg_scanrecord into scan_control struct. sc->nr_scanned at el is not designed for exporting information. For example, nr_scanned is reset frequentrly and incremented +2 at scanning mapped pages. To avoid complexity, I added a new param in scan_control which is for exporting scanning score. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Cc: Andrew Bresticker <abrestic@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: fix behavior of mem_cgroup_resize_limit()Daisuke Nishimura1-1/+1
Commit 22a668d7c3ef ("memcg: fix behavior under memory.limit equals to memsw.limit") introduced "memsw_is_minimum" flag, which becomes true when mem_limit == memsw_limit. The flag is checked at the beginning of reclaim, and "noswap" is set if the flag is true, because using swap is meaningless in this case. This works well in most cases, but when we try to shrink mem_limit, which is the same as memsw_limit now, we might fail to shrink mem_limit because swap doesn't used. This patch fixes this behavior by: - check MEM_CGROUP_RECLAIM_SHRINK at the begining of reclaim - If it is set, don't set "noswap" flag even if memsw_is_minimum is true. Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: fix vmscan count in small memcgsKAMEZAWA Hiroyuki1-6/+12
Commit 246e87a93934 ("memcg: fix get_scan_count() for small targets") fixes the memcg/kswapd behavior against small targets and prevent vmscan priority too high. But the implementation is too naive and adds another problem to small memcg. It always force scan to 32 pages of file/anon and doesn't handle swappiness and other rotate_info. It makes vmscan to scan anon LRU regardless of swappiness and make reclaim bad. This patch fixes it by adjusting scanning count with regard to swappiness at el. At a test "cat 1G file under 300M limit." (swappiness=20) before patch scanned_pages_by_limit 360919 scanned_anon_pages_by_limit 180469 scanned_file_pages_by_limit 180450 rotated_pages_by_limit 31 rotated_anon_pages_by_limit 25 rotated_file_pages_by_limit 6 freed_pages_by_limit 180458 freed_anon_pages_by_limit 19 freed_file_pages_by_limit 180439 elapsed_ns_by_limit 429758872 after patch scanned_pages_by_limit 180674 scanned_anon_pages_by_limit 24 scanned_file_pages_by_limit 180650 rotated_pages_by_limit 35 rotated_anon_pages_by_limit 24 rotated_file_pages_by_limit 11 freed_pages_by_limit 180634 freed_anon_pages_by_limit 0 freed_file_pages_by_limit 180634 elapsed_ns_by_limit 367119089 scanned_pages_by_system 0 the numbers of scanning anon are decreased(as expected), and elapsed time reduced. By this patch, small memcgs will work better. (*) Because the amount of file-cache is much bigger than anon, recalaim_stat's rotate-scan counter make scanning files more. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: change memcg_oom_mutex to spinlockMichal Hocko1-11/+11
memcg_oom_mutex is used to protect memcg OOM path and eventfd interface for oom_control. None of the critical sections which it protects sleep (eventfd_signal works from atomic context and the rest are simple linked list resp. oom_lock atomic operations). Mutex is also too heavyweight for those code paths because it triggers a lot of scheduling. It also makes makes convoying effects more visible when we have a big number of oom killing because we take the lock mutliple times during mem_cgroup_handle_oom so we have multiple places where many processes can sleep. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: make oom_lock 0 and 1 based rather than counterMichal Hocko1-16/+70
Commit 867578cb ("memcg: fix oom kill behavior") introduced a oom_lock counter which is incremented by mem_cgroup_oom_lock when we are about to handle memcg OOM situation. mem_cgroup_handle_oom falls back to a sleep if oom_lock > 1 to prevent from multiple oom kills at the same time. The counter is then decremented by mem_cgroup_oom_unlock called from the same function. This works correctly but it can lead to serious starvations when we have many processes triggering OOM and many CPUs available for them (I have tested with 16 CPUs). Consider a process (call it A) which gets the oom_lock (the first one that got to mem_cgroup_handle_oom and grabbed memcg_oom_mutex) and other processes that are blocked on the mutex. While A releases the mutex and calls mem_cgroup_out_of_memory others will wake up (one after another) and increase the counter and fall into sleep (memcg_oom_waitq). Once A finishes mem_cgroup_out_of_memory it takes the mutex again and decreases oom_lock and wakes other tasks (if releasing memory by somebody else - e.g. killed process - hasn't done it yet). A testcase would look like: Assume malloc XXX is a program allocating XXX Megabytes of memory which touches all allocated pages in a tight loop # swapoff SWAP_DEVICE # cgcreate -g memory:A # cgset -r memory.oom_control=0 A # cgset -r memory.limit_in_bytes= 200M # for i in `seq 100` # do # cgexec -g memory:A malloc 10 & # done The main problem here is that all processes still race for the mutex and there is no guarantee that we will get counter back to 0 for those that got back to mem_cgroup_handle_oom. In the end the whole convoy in/decreases the counter but we do not get to 1 that would enable killing so nothing useful can be done. The time is basically unbounded because it highly depends on scheduling and ordering on mutex (I have seen this taking hours...). This patch replaces the counter by a simple {un}lock semantic. As mem_cgroup_oom_{un}lock works on the a subtree of a hierarchy we have to make sure that nobody else races with us which is guaranteed by the memcg_oom_mutex. We have to be careful while locking subtrees because we can encounter a subtree which is already locked: hierarchy: A / \ B \ /\ \ C D E B - C - D tree might be already locked. While we want to enable locking E subtree because OOM situations cannot influence each other we definitely do not want to allow locking A. Therefore we have to refuse lock if any subtree is already locked and clear up the lock for all nodes that have been set up to the failure point. On the other hand we have to make sure that the rest of the world will recognize that a group is under OOM even though it doesn't have a lock. Therefore we have to introduce under_oom variable which is incremented and decremented for the whole subtree when we enter resp. leave mem_cgroup_handle_oom. under_oom, unlike oom_lock, doesn't need be updated under memcg_oom_mutex because its users only check a single group and they use atomic operations for that. This can be checked easily by the following test case: # cgcreate -g memory:A # cgset -r memory.use_hierarchy=1 A # cgset -r memory.oom_control=1 A # cgset -r memory.limit_in_bytes= 100M # cgset -r memory.memsw.limit_in_bytes= 100M # cgcreate -g memory:A/B # cgset -r memory.oom_control=1 A/B # cgset -r memory.limit_in_bytes=20M # cgset -r memory.memsw.limit_in_bytes=20M # cgexec -g memory:A/B malloc 30 & #->this will be blocked by OOM of group B # cgexec -g memory:A malloc 80 & #->this will be blocked by OOM of group A While B gets oom_lock A will not get it. Both of them go into sleep and wait for an external action. We can make the limit higher for A to enforce waking it up # cgset -r memory.memsw.limit_in_bytes=300M A # cgset -r memory.limit_in_bytes=300M A malloc in A has to wake up even though it doesn't have oom_lock. Finally, the unlock path is very easy because we always unlock only the subtree we have locked previously while we always decrement under_oom. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: consolidate memory cgroup lru stat functionsKAMEZAWA Hiroyuki4-132/+60
In mm/memcontrol.c, there are many lru stat functions as.. mem_cgroup_zone_nr_lru_pages mem_cgroup_node_nr_file_lru_pages mem_cgroup_nr_file_lru_pages mem_cgroup_node_nr_anon_lru_pages mem_cgroup_nr_anon_lru_pages mem_cgroup_node_nr_unevictable_lru_pages mem_cgroup_nr_unevictable_lru_pages mem_cgroup_node_nr_lru_pages mem_cgroup_nr_lru_pages mem_cgroup_get_local_zonestat Some of them are under #ifdef MAX_NUMNODES >1 and others are not. This seems bad. This patch consolidates all functions into mem_cgroup_zone_nr_lru_pages() mem_cgroup_node_nr_lru_pages() mem_cgroup_nr_lru_pages() For these functions, "which LRU?" information is passed by a mask. example: mem_cgroup_nr_lru_pages(mem, BIT(LRU_ACTIVE_ANON)) And I added some macro as ALL_LRU, ALL_LRU_FILE, ALL_LRU_ANON. example: mem_cgroup_nr_lru_pages(mem, ALL_LRU) BTW, considering layout of NUMA memory placement of counters, this patch seems to be better. Now, when we gather all LRU information, we scan in following orer for_each_lru -> for_each_node -> for_each_zone. This means we'll touch cache lines in different node in turn. After patch, we'll scan for_each_node -> for_each_zone -> for_each_lru(mask) Then, we'll gather information in the same cacheline at once. [akpm@linux-foundation.org: fix warnigns, build error] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26memcg: export memory cgroup's swappiness with mem_cgroup_swappiness()KAMEZAWA Hiroyuki3-25/+26
Each memory cgroup has a 'swappiness' value which can be accessed by get_swappiness(memcg). The major user is try_to_free_mem_cgroup_pages() and swappiness is passed by argument. It's propagated by scan_control. get_swappiness() is a static function but some planned updates will need to get swappiness from files other than memcontrol.c This patch exports get_swappiness() as mem_cgroup_swappiness(). With this, we can remove the argument of swapiness from try_to_free... and drop swappiness from scan_control. only memcg uses it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Ying Han <yinghan@google.com> Cc: Shaohua Li <shaohua.li@intel.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26rtc: fix hrtimer deadlockThomas Gleixner1-19/+37
Ben reported a lockup related to rtc. The lockup happens due to: CPU0 CPU1 rtc_irq_set_state() __run_hrtimer() spin_lock_irqsave(&rtc->irq_task_lock) rtc_handle_legacy_irq(); spin_lock(&rtc->irq_task_lock); hrtimer_cancel() while (callback_running); So the running callback never finishes as it's blocked on rtc->irq_task_lock. Use hrtimer_try_to_cancel() instead and drop rtc->irq_task_lock while waiting for the callback. Fix this for both rtc_irq_set_state() and rtc_irq_set_freq(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reported-by: Ben Greear <greearb@candelatech.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26rtc: limit frequencyThomas Gleixner1-1/+1
Due to the hrtimer self rearming mode a user can DoS the machine simply because it's starved by hrtimer events. The RTC hrtimer is self rearming. We really need to limit the frequency to something sensible. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ben Greear <greearb@candelatech.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26rtc: handle errors correctly in rtc_irq_set_state()Thomas Gleixner1-0/+3
The code checks the correctness of the parameters, but unconditionally arms/disarms the hrtimer. The result is that a random task might arm/disarm rtc timer and surprise the real owner by either generating events or by stopping them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ben Greear <greearb@candelatech.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26mn10300, exec: remove redundant set_fs(USER_DS)Mathias Krause1-1/+0
The address limit is already set in flush_old_exec() so this set_fs(USER_DS) is redundant. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26drivers/base/power/opp.c: fix dev_opp initial valueJonghwan Choi1-1/+1
Dev_opp initial value shoule be ERR_PTR(), IS_ERR() is used to check error. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26frv, exec: remove redundant set_fs(USER_DS)Mathias Krause2-5/+1
The address limit is already set in flush_old_exec() so those calls to set_fs(USER_DS) are redundant. Also removed the dead code in flush_thread(). Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26i2c-eg20t : Fix the issue of Combined R/W transfer modeTomoya MORINAGA1-2/+2
issue-1 In case combined transfer mode fails halfway, the processing must be stopped halfway. However currently, the processing is continued. This patch breaks the processing. issue-2 Currently, pch_i2c_xfer returns read/write size at that time. However pch_i2c_xfer must return the number of messages to be read/written. This patch modifies correctly. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-07-26i2c-eg20t : Support Combined R/W transfer modeTomoya MORINAGA1-19/+20
Currently, Combined R/W transfer mode is not supported. This patch enables Combined R/W transfer mode. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-07-26i2c: Tegra: Add DeviceTree supportJohn Bonesio1-1/+16
This patch modifies the tegra i2c driver so that it can be initiailized using the device tree along with the devices connected to the i2c bus. Signed-off-by: John Bonesio <bones@secretlab.ca> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: OIof Johansson <olof@lixom.net> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-07-26Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds56-287/+697
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (31 commits) MIPS: Close races in TLB modify handlers. MIPS: Add uasm UASM_i_SRL_SAFE macro. MIPS: RB532: Use hex_to_bin() MIPS: Enable cpu_has_clo_clz for MIPS Technologies' platforms MIPS: PowerTV: Provide cpu-feature-overrides.h MIPS: Remove pointless return statement from empty void functions. MIPS: Limit fixrange_init() to the FIXMAP region MIPS: Install handlers for software IRQs MIPS: Move FIXADDR_TOP into spaces.h MIPS: Add SYNC after cacheflush MIPS: pfn_valid() is broken on low memory HIGHMEM systems MIPS: HIGHMEM DMA on noncoherent MIPS32 processors MIPS: topdown mmap support MIPS: Remove redundant addr_limit assignment on exec. MIPS: AR7: Replace __attribute__((__packed__)) with __packed MIPS: AR7: Remove 'space before tabs' in platform.c MIPS: Lantiq: Add missing clk_enable and clk_disable functions. MIPS: AR7: Fix trailing semicolon bug in clock.c MAINTAINERS: Update MIPS entry. MIPS: BCM63xx: Remove duplicate PERF_IRQSTAT_REG definition ...
2011-07-26Merge branch 'for-linus' of ↵Linus Torvalds17-145/+306
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits) ceph: document unlocked d_parent accesses ceph: explicitly reference rename old_dentry parent dir in request ceph: document locking for ceph_set_dentry_offset ceph: avoid d_parent in ceph_dentry_hash; fix ceph_encode_fh() hashing bug ceph: protect d_parent access in ceph_d_revalidate ceph: protect access to d_parent ceph: handle racing calls to ceph_init_dentry ceph: set dir complete frag after adding capability rbd: set blk_queue request sizes to object size ceph: set up readahead size when rsize is not passed rbd: cancel watch request when releasing the device ceph: ignore lease mask ceph: fix ceph_lookup_open intent usage ceph: only link open operations to directory unsafe list if O_CREAT|O_TRUNC ceph: fix bad parent_inode calc in ceph_lookup_open ceph: avoid carrying Fw cap during write into page cache libceph: don't time out osd requests that haven't been received ceph: report f_bfree based on kb_avail rather than diffing. ceph: only queue capsnap if caps are dirty ceph: fix snap writeback when racing with writes ...
2011-07-26gma500: udelay(20000) it too long againStephen Rothwell1-1/+1
so replace it with mdelay(20). Fixes build error: ERROR: "__bad_udelay" [drivers/staging/gma500/psb_gfx.ko] undefined! Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26USB / Renesas: Fix build issue related to struct scatterlistRafael J. Wysocki1-0/+1
Fix build issue caused by undefined struct scatterlist in drivers/usb/renesas_usbhs/fifo.c. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26MMC / TMIO: Fix build issue related to struct scatterlistRafael J. Wysocki1-0/+1
Fix build issue caused by undefined struct scatterlist in drivers/mmc/host/tmio_mmc.c. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26Merge branch 'for_linus' of ↵Linus Torvalds23-271/+1420
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: jbd: change the field "b_cow_tid" of struct journal_head from type unsigned to tid_t ext3.txt: update the links in the section "useful links" to the latest ones ext3: Fix data corruption in inodes with journalled data ext2: check xattr name_len before acquiring xattr_sem in ext2_xattr_get ext3: Fix compilation with -DDX_DEBUG quota: Remove unused declaration jbd: Use WRITE_SYNC in journal checkpoint. jbd: Fix oops in journal_remove_journal_head() ext3: Return -EINVAL when start is beyond the end of fs in ext3_trim_fs() ext3/ioctl.c: silence sparse warnings about different address spaces ext3/ext4 Documentation: remove bh/nobh since it has been deprecated ext3: Improve truncate error handling ext3: use proper little-endian bitops ext2: include fs.h into ext2_fs.h ext3: Fix oops in ext3_try_to_allocate_with_rsv() jbd: fix a bug of leaking jh->b_jcount jbd: remove dependency on __GFP_NOFAIL ext3: Convert ext3 to new truncate calling convention jbd: Add fixed tracepoints ext3: Add fixed tracepoints Resolve conflicts in fs/ext3/fsync.c due to fsync locking push-down and new fixed tracepoints.
2011-07-26ceph: document unlocked d_parent accessesSage Weil2-4/+11
For the most part we don't care about racing with rename when directing MDS requests; either the old or new parent is fine. Document that, and do some minor cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: explicitly reference rename old_dentry parent dir in requestSage Weil4-11/+17
We carry a pin on the parent directory for the rename source and dest dentries. For the source it's r_locked_dir; we need to explicitly reference the old_dentry parent as well, since the dentry's d_parent may change between when the request was created and pinned and when it is freed. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: document locking for ceph_set_dentry_offsetSage Weil1-1/+3
Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: avoid d_parent in ceph_dentry_hash; fix ceph_encode_fh() hashing bugSage Weil4-13/+18
Have caller pass in a safely-obtained reference to the parent directory for calculating a dentry's hash valud. While we're here, simpify the flow through ceph_encode_fh() so that there is a single exit point and cleanup. Also fix a bug with the dentry hash calculation: calculate the hash for the dentry we were given, not its parent. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: protect d_parent access in ceph_d_revalidateSage Weil1-15/+17
Protect d_parent with d_lock. Carry a reference. Simplify the flow so that there is a single exit point and cleanup. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: protect access to d_parentSage Weil6-15/+33
d_parent is protected by d_lock: use it when looking up a dentry's parent directory inode. Also take a reference and drop it in the caller to avoid a use-after-free. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: handle racing calls to ceph_init_dentrySage Weil1-9/+12
The ->lookup() and prepopulate_readdir() callers are working with unhashed dentries, so we don't have to worry. The export.c callers, though, need to initialize something they got back from d_obtain_alias() and are potentially racing with other callers. Make sure we don't return unless the dentry is properly initialized (by us or someone else). Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: set dir complete frag after adding capabilitySage Weil1-13/+17
Curretly ceph_add_cap clears the complete bit if we are newly issued the FILE_SHARED cap, which is normally the case for a newly issue cap on a new directory. That means we clear the just-set bit. Move the check that sets the flag to after the cap is added/updated. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26rbd: set blk_queue request sizes to object sizeJosh Durgin1-0/+15
This improves performance since more requests can be merged. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Josh Durgin <josh.durgin@dreamhost.com>
2011-07-26ceph: set up readahead size when rsize is not passedYehuda Sadeh1-0/+4
This should improve the default read performance, as without it readahead is practically disabled. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-07-26rbd: cancel watch request when releasing the deviceYehuda Sadeh1-1/+30
We were missing this cleanup, so when a device was released the osd didn't clean up its watchers list, so following notifications could be slow as osd needed to timeout on the client. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
2011-07-26ceph: ignore lease maskSage Weil3-18/+12
The lease mask is no longer used (and it changed a while back). Instead, use a non-zero duration to indicate that there is a lease being issued. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: fix ceph_lookup_open intent usageSage Weil3-19/+37
We weren't properly calling lookup_instantiate_filp when setting up the lookup intent, which could lead to file leakage on errors. So: - use separate helper for the hidden snapdir translation, immediately following the mds request - use ceph_finish_lookup for the final dentry/return value dance in the exit path - lookup_instantiate_filp on success Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: only link open operations to directory unsafe list if O_CREAT|O_TRUNCSage Weil1-1/+2
We only need to put these on the directory unsafe list if they have side effects that fsync(2) should flush out. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-26ceph: fix bad parent_inode calc in ceph_lookup_openSage Weil1-2/+3
We were always getting NULL here because the intent file f_dentry is always NULL at this point, which means we were always passing NULL to ceph_mdsc_do_request. In reality, this was fine, since this isn't currently ever a write operation that needs to get strung on the dir's unsafe list. Use the dir explicitly, and only pass it if this open has side-effects that a dir fsync should flush. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>

Privacy Policy