aboutsummaryrefslogtreecommitdiffstats
path: root/scripts/package
AgeCommit message (Collapse)AuthorFilesLines
2009-12-12scripts/package: deb-pkg: use fakeroot if availableJonathan Nieder1-2/+19
Running "make deb-pkg" requires setting KBUILD_PKG_ROOTCMD or becoming root oneself or it errors out. Unless already running as root or KBUILD_PKG_ROOTCMD is already set, use fakeroot as a good default. With this patch applied, you can run "make oldconfig deb-pkg" as an ordinary user to build a binary package for an updated kernel tree and it should just work. fakeroot is too zealous by default in treating files as owned by root. Its wrapped stat() sets st_uid and st_gid to 0 for all files, which causes Git to go on a wild goose chase if CONFIG_LOCALVERSION_AUTO is set, checking if any file's content has changed along with its stat information. Avoid this by telling fakeroot to use the actual owner and group for preexisting files, by passing it the -u option. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12scripts/package: add KBUILD_PKG_ROOTCMD variableJonathan Nieder1-1/+2
Let the deb-pkg target acquire (fake) root privileges before running commands that need them. Without such privileges, deb-pkg errors out because chown fails. The new KBUILD_PKG_ROOTCMD variable, if defined, is used as a command to run other commands with possibly fake elevated privileges. Since this is not needed for the tar-pkg and rpm-pkg targets, it is only used by deb-pkg. If it is not defined, the behavior is as before, and the user will have to rerun make as root. In other words, as a shortcut, instead of running 'make oldconfig && make && fakeroot -u make deb-pkg', one can use the single command 'make oldconfig deb-pkg KBUILD_PKG_ROOTCMD="fakeroot -u"'. Suggested-by: Ryan Anderson <ryan@michonline.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-12-12scripts/package: tar-pkg: use tar --owner=rootMichal Marek1-1/+5
Use the --owner= and --group= options to make sure the entries in the built tar file are owned by root. Without this change, a careless sysadmin using the tar-pkg target can easily end up installing a kernel that is writable by the unprivileged user account used to build the kernel. Test that these options are understood before using them so that non-GNU versions of tar can still be used if the operator is appropriately cautious. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
2009-10-11kbuild: fix the binrpm-pkg target to work with KBUILD_OUTPUT setFrans Pop2-2/+11
The binrpm-pkg target (binary RPM only) fails when called with KBUILD_OUTPUT set. This patch makes it work. For the rpm-pkg target (source + binary RPM), building with KBUILD_OUTPUT set is not possible and also not needed as the actual build is done in a temporary directory anyway, so check that KBUILD_OUTPUT is not set in that case to avoid later errors. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-07-17kbuild, deb-pkg: fix install scripts for posix shmaximilian attems1-1/+1
bash versus dash and posh disagree on expanding $@ within double quotes: export x="$@" see http://bugs.debian.org/381091 for details just use the arglist with $*. dpkg: error processing linux-image-2.6.31-rc1_2.6.31-rc1-18_i386.deb (--install): subprocess pre-installation script returned error exit status 2 export: 6: 2.6.31-rc1-18: bad variable name fixes http://bugzilla.kernel.org/show_bug.cgi?id=13567 seen on Ubuntu as there dash is the default sh, versus bash on Debian. Reported-by: Pauli <suokkos@gmail.com> Cc: Frans Pop <elendil@planet.nl> Signed-off-by: maximilian attems <max@stro.at> Acked-By: Andres Salomon <dilinger@collabora.co.uk>
2009-06-27kbuild: deb-pkg ship changelogmaximilian attems1-0/+2
In the series for 2.6.31 it was noticed to ship the copyright, but the generated changelog got lost somehow. As bonus the generated linux-image deb packages are Lenny lintian clean. Cc: Frans Pop <elendil@planet.nl> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: bump standards versionmaximilian attems1-1/+1
Latest Debian policy is 3.8.1. Even if we are not yet compliant to it strive for the latest. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: fix Section fieldmaximilian attems1-1/+1
Section "base" has been removed, the base is defined by Priority field. For Squeeze the section should be "kernel", but as that's not yet supported for Sarge and Etch we stay with admin for now. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: fix Provides fieldmaximilian attems1-2/+2
kernel-image naming has been dropped for the Lenny release and was only transitional for Etch. As it builds modules it provides linux-modules-$version. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: fix generated package namemaximilian attems1-1/+1
The binary package that make deb-pkg creates is a linux-image. To be fixed may also be the addition of $DEB_ARCH. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: improve Source fieldFrans Pop1-2/+2
The Source: field is defined as the source package in the package archive from which a binary packages are built. As deb-pkg does not generate a source package, we should avoid to use any existing source packages here. Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: maximilian attems <max@stro.at> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: improve maintainer identificationmaximilian attems1-3/+19
Try harder to find email and maintainer name. Debian's own devscripts all use DEBEMAIL or DEBFULLNAME prior to an eventual EMAIL or NAME environment variable. Match their logic. "Anonymous" sounds nicer then "Kernel Compiler" if no name is found. Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: generate debian/copyright fileFrans Pop1-3/+25
On Thursday 23 April 2009, Frans Pop wrote: Add a basic debian/copyright to the binary packages. Based on an earlier patch from Maximilian Attems. Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: maximilian attems <max@stro.at> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: improve changelog entry and package descriptionsFrans Pop1-4/+4
Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: maximilian attems <max@stro.at> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: allow alternative hook scripts directory in .deb packagesFrans Pop1-4/+8
Hook scripts in the default directory /etc/kernel are also executed by official Debian kernel packages as well as kernel packages created using make-kpkg. Allow to specify an alternative hook scripts directory by exporting the environment variable KDEB_HOOKDIR. Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: maximilian attems <max@stro.at> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: allow to specify a custom revision for .deb packagesFrans Pop1-1/+6
Allow to specify a custom revision for the generated .deb by exporting the environment variable KDEB_PKGVERSION. Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: maximilian attems <max@stro.at> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: pass Debian maintainer script parameters to packaging hook ↵Frans Pop1-1/+4
scripts The Debian packaging scripts created by the deb-pkg target do not pass on the standard Debian maintainer script parameters to hook scripts, which means that those scripts cannot tell whether they are being called during e.g. install vs. upgrade, or removal vs. purge of the package. As there are several variantions in how hook scripts are called from kernel packages, we pass the parameters in the environment variable DEB_MAINT_PARAMS rather than as extra arguments. Bump version of builddep script to 1.3. Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: maximilian attems <max@stro.at> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: fix 'file not found' error when building .deb package for armFrans Pop1-1/+4
Not all architectures prepend the $(boot) path in $(KBUILD_IMAGE). Allow for that fact in the builddeb script. Example is arm. Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: maximilian attems <max@stro.at> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: refactor code to reduce duplicationFrans Pop1-17/+20
Factor out code to build package into separate function and only write "source" section for the debian/control file once. Signed-off-by: Frans Pop <elendil@planet.nl> Acked-by: maximilian attems <max@stro.at> Cc: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-06-09kbuild, deb-pkg: minor general improvements in builddeb scriptFrans Pop1-11/+10
Minor coding style improvements and typo fix in leading comment. Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Andres Salomon <dilinger@debian.org> Acked-by: maximilian attems <max@stro.at> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-02parisc: fix "make tar-pkg"Helge Deller1-0/+4
Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-07kbuild: fix 'make rpm' when CONFIG_LOCALVERSION_AUTO=y and using SCM treeJosh Hunt1-1/+2
Running 'make rpm' fails when CONFIG_LOCALVERSION_AUTO=y and using a kernel source tree under SCM. This is due to KERNELRELEASE being different when the initial make is run and when make is run from rpmbuild. mkspec creates kernel.spec using KERNELRELEASE: <mkspec> echo "%files" echo '%defattr (-, root, root)' echo "%dir /lib/modules" echo "/lib/modules/$KERNELRELEASE" echo "/lib/firmware" echo "/boot/*" echo "" </mkspec> When CONFIG_LOCALVERSION_AUTO=y scripts/setlocalversion is called and grabs any additional version info from SCM. Next, the srctree is tarred up and SCM information is excluded. rpmbuild reruns make and in the process generates a new include/config/kernel.release and thus a new KERNELRELEASE. However this time the SCM information is gone so KERNELRELEASE no longer has the additional version information. When "make modules_install" runs, it uses the new KERNELRELEASE value to determine where to install the modules. This conflicts with where the spec file assumes they are going because of the mis-matching KERNELRELEASE versions. <snippet> + INSTALL_MOD_PATH=/var/tmp/kernel-2.6.29rc4tip01479g5d85422-root + make -j16 modules_install INSTALL crypto/aead.ko INSTALL crypto/cbc.ko INSTALL crypto/chainiv.ko INSTALL crypto/crc32c.ko INSTALL crypto/crypto_algapi.ko INSTALL crypto/crypto_blkcipher.ko INSTALL crypto/crypto_hash.ko INSTALL crypto/cryptomgr.ko INSTALL crypto/ecb.ko INSTALL crypto/eseqiv.ko INSTALL crypto/krng.ko INSTALL crypto/md5.ko INSTALL crypto/pcbc.ko INSTALL crypto/rng.ko INSTALL drivers/block/cciss.ko INSTALL drivers/hid/hid-dummy.ko INSTALL drivers/scsi/iscsi_tcp.ko INSTALL drivers/scsi/libiscsi.ko INSTALL drivers/scsi/libiscsi_tcp.ko INSTALL drivers/scsi/scsi_transport_iscsi.ko INSTALL drivers/scsi/scsi_wait_scan.ko INSTALL fs/lockd/lockd.ko INSTALL fs/nfs/nfs.ko INSTALL fs/nfsd/nfsd.ko INSTALL lib/libcrc32c.ko INSTALL net/sunrpc/sunrpc.ko DEPMOD 2.6.29-rc4-tip + cp arch/x86/boot/bzImage /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinuz-2.6.29-rc4-tip-01479-g5d85422 + cp System.map /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/System.map-2.6.29-rc4-tip-01479-g5d85422 + cp .config /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/config-2.6.29-rc4-tip-01479-g5d85422 + cp vmlinux vmlinux.orig + bzip2 -9 vmlinux + mv vmlinux.bz2 /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/boot/vmlinux-2.6.29-rc4-tip-01479-g5d85422.bz2 + mv vmlinux.orig vmlinux + /usr/lib/rpm/brp-compress Processing files: kernel-2.6.29rc4tip01479g5d85422-2 error: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 RPM build errors: File not found: /var/tmp/kernel-2.6.29rc4tip01479g5d85422-root/lib/modules/2.6.29-rc4-tip-01479-g5d85422 make[1]: *** [rpm] Error 1 make: *** [rpm] Error 2 </snippet> I have tested this patch on git -tip, Linus' git tree, and the kernel.org tar files, both with and without CONFIG_LOCALVERSION_AUTO=y. Signed-off-by: Josh Hunt <josh@scalex86.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> ----
2009-03-07kbuild: fix mkspec to cleanup RPM_BUILD_ROOTJosh Hunt1-1/+1
The contents of the %clean section in mkspec is currently commented out leaving RPM_BUILD_ROOT and its contents on the build machine. This patch removes it once the rpm build process is complete. Signed-off-by: Josh Hunt <josh@scalex86.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-02-15kbuild: add vmlinux to kernel rpmJosh Hunt1-0/+8
We are building an automated system to test kernels weekly and need to provide an rpm to our QA dept. We would like to use the ability to create kernel rpms already in the kernel's Makefile, but need the vmlinux file included in the rpm for later debugging. This patch adds a compressed vmlinux to the kernel rpm when doing a make rpm-pkg or binrpm-pkg and upon install places the vmlinux file in /boot. Signed-off-by: Josh Hunt <josh@scalex86.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-05kbuild: remove TAR_IGNORERobert P. J. Day1-4/+0
Given that there is no usage of a TAR_IGNORE variable remove it Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-12-03scripts/package: allow custom options to rpmJeremy Kerr1-2/+3
Add a RPMOPTS make variable to allow arbitrary options to be passed to rpm during 'make rpm-pkg'. For example: make RPMOPTS="--define '_topdir /home/jk/rpm'" rpm-pkg Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-11-09kbuild: Fixup deb-pkg target to generate separate firmware debJonathan McDowell1-2/+22
The below is a simplistic fix for "make deb-pkg"; it splits the firmware out to a linux-firmware-image package and adds an (unversioned) Suggests to the linux package for this firmware. Signed-Off-By: Jonathan McDowell <noodles@earth.li> Acked-by: Frans Pop <elendil@planet.nl> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-29scripts/package: don't break if %{_smp_mflags} isn't setJeremy Kerr1-1/+1
Currently, if we do a 'make rpm-pkg' without the _smp_mflags rpm macro defined, the build fails with: [snip] Executing(%build): /bin/bash -e /var/tmp/rpm-tmp.67959 + umask 022 + cd /home/jk/devel/kernel-snapshot/rpm/BUILD + cd kernel-2.6.26 + make clean + make '%{_smp_mflags}' make[3]: *** No rule to make target `%{_smp_mflags}'. Stop. error: Bad exit status from /var/tmp/rpm-tmp.67959 (%build) This change uses the 'null if not set' reference to the _smp_mflags macro instead. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-10-29kbuild: mkspec - fix build rpmEvgeniy Manachkin1-0/+3
This is patch to fix incorrect mkspec script to make rpm correctly at 2.6.27 vanilla kernel. This is regression in 2.6.27. 2.6.26 make rpm work good. In 2.6.27 'make rpm' say error from rpmbuild "Many unpacked files (*.fw)." Signed-off-by: Evgeniy Manachkin <sfstudio@mail.ru> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Stable <stable@kernel.org>
2008-02-09Kbuild: Fix deb-pkg target to work with kernel versions ending with ↵Michal Sojka1-1/+2
-<text-without-digit> If CONIFIG_LOCALVERSION is set for example to -loop, the following error message was generated. dpkg-deb - error: Debian revision (`loop') doesn't contain any digits dpkg-deb: 1 errors in control file The patch solves this by adding a numeric revision to package version. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kbuild: support ARCH=x86 in buildtarDaniel De Graaf1-2/+2
Signed-off-by: Daniel De Graaf <danieldegraaf@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28Kbuild: Clarify the rpm-related make packaging targetsRobert P. J. Day1-3/+2
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18kbuild: make deb-pkg - add 'Provides:' linebugme-daemon@bugzilla.kernel.org1-0/+2
http://bugzilla.kernel.org/show_bug.cgi?id=8941 Current Debian's kernel-modules depend on matching linux-image-$version, though Linux's make deb-pkg build a .deb that 'Provides: kernel-image-$version' only. The following patch adds the Debian-compliant 'Provides', leaving the default one; hopely this will make way all happy. Signed-off-by: paolo <oopla@users.sf.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-21x86_64: Support x86_64 in make buildtarAndi Kleen1-2/+2
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-09-25kbuild: fix "mkdir -p" usage in scripts/package/mkspecRolf Eike Beer1-2/+2
"mkdir -p" does not only mean not to complain if the directory already exists, but also to create the parent directories if needed. This patch removes "lib" from the list of directories to create as we will also create "lib/modules". Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-06-08kbuild: fix make rpm for powerpcMike Wolf1-0/+5
The default target for most powerpc platforms is zImage. The zImage however is in arch/powerpc/boot and the mkspec script was set up to get the kernel from the top level of the kernel tree. This patch copies vmlinux to arch/powerpc/boot and then copies the kernel to the tmp directory so the rpm can be made. Signed-off-by: Mike Wolf <mjw@us.ibm.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-08kbuild: replace PHONY with FORCESam Ravnborg1-11/+7
.PHONY: does not take patterns so use FORCE to achive same effect. Thanks to "Paul D. Smith" <psmith@gnu.org> for noticing this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-06kbuild: change kbuild to not rely on incorrect GNU make behaviorPaul Smith1-5/+5
The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make. For more details on the incorrect behavior, see: http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html Changes in this patch: - Keep all targets that are to be marked .PHONY in a variable, PHONY. - Add .PHONY: $(PHONY) to mark them properly. - Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not. Signed-off-by: Paul Smith <psmith@gnu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-01kbuild: tar-pkg with out-out-tree buildingJan-Benedict Glaw2-19/+14
Fix out-of-tree builds for the tar-pkg targets When I wrote the buildtar script, I didn't even think about out-of-tree builds because I didn't use these back then. This patch throughoutly uses ${objtree} instead of `pwd`. Also, the kernel version is no longer manually built. Instead, it will properly use $KERNELRELEASE . Installing modules is only done if CONFIG_MODULES is set. Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-21[PATCH] kbuild: make help binrpm-pkg fixCoywolf Qi Hunt1-1/+1
This fixes kbuild make help binrpm-pkg missing `''. Signed-off-by: Coywolf Qi Hunt <coywolf@lovecn.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-14kbuild: Fix bug in make deb-pkg when using seperate source and output ↵Sam Ravnborg2-3/+3
directories From: Ryan Anderson <ryan@michonline.com> When running "make O=something deb-pkg", I get a failure that claims I haven't configured my kernel (I have). Running it a second time tells me to run "make mrproper" (include/linux/version.h got built on the first run) Original patch from: From: Ajay Patel <patela@gmail.com> With modifications from: Signed-off-By: Ryan Anderson <ryan@michonline.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-14uml: Restore proper descriptions in make deb-pkg targetSam Ravnborg1-2/+26
From: Ryan Anderson <ryan@michonline.com> This pulls the description from the Debian user-mode-linux package, and puts $version back in the appropriate places for both descriptions. Signed-off-by: Ryan Anderson <ryan@michonline.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-14uml: Make deb-pkg build target build a Debian-style user-mode-linux packageSam Ravnborg1-6/+26
From: Ryan Anderson <ryan@michonline.com> Make the deb-pkg build target understand the "um" arch and set up the package and directory structure to match a mainline-Debian style user-mode-linux package. This is primarily so that it stops matching, exactly, the naming convention used by normal, non-UML kernels generated by this command. Installing "linux-2.6.11" and "linux-2.6.11", where one is a UML kernel doesn't do the right thing. This fixes that. Signed-off-by: Ryan Anderson <ryan@michonline.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-13[PATCH] kbuild: restrain output of "make help" to 80 columnsYum Rayan1-1/+2
This patch fixes the output of "make help" to fit in a 80 column screen. Please push upstream as part of your other patches. Signed-off-by: Yum Rayan <yum.rayan@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-13[PATCH] kbuild: add ia64 support to rpm Makefile targetGreg Edwards1-0/+9
On ia64, only the EFI (fat) partition is available to boot from. The rpm needs to install the kernel under /boot/efi to be useable on ia64. Signed-off-by: Greg Edwards <edwardsg@sgi.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-07-12[PATCH] kbuild: create tarballsJan-Benedict Glaw2-3/+127
It adds tarball packaging, which I prefer for distribution. Also one of the two blanks after @echo is removed. One seems to be enough :) Signed-off-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds3-0/+250
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

Privacy Policy