aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAntti Palosaari <crope@iki.fi>2010-10-22 21:45:18 (GMT)
committerMauro Carvalho Chehab <mchehab@redhat.com>2010-10-23 13:11:28 (GMT)
commit74c8e3ad0e5296d65be091bdc0d3ae9f72f7e019 (patch)
tree2f818cce0a2b2655a425facf6aea6427ca2ca825
parentd8d627834b1f4dd21a63c2b524e9eb56173df57b (diff)
[media] af9015: RC fixes and improvements
Read all remote controller registers at once to reduce USB remote polling traffic. Use .rc_codes() to disable / enable remote polling instead of .rc_query(). Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-rw-r--r--drivers/media/dvb/dvb-usb/af9015.c80
1 files changed, 33 insertions, 47 deletions
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 759cbf8..f11743f 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -207,12 +207,18 @@ static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val)
return af9015_write_regs(d, addr, &val, 1);
}
-static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val)
+static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len)
{
- struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, 1, val};
+ struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
+ val};
return af9015_ctrl_msg(d, &req);
}
+static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val)
+{
+ return af9015_read_regs(d, addr, val, 1);
+}
+
static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
u8 val)
{
@@ -787,11 +793,14 @@ static void af9015_set_remote_config(struct usb_device *udev,
af9015_rc_setup_modparam);
}
}
+
+ /* finally load "empty" just for leaving IR receiver enabled */
+ if (!props->rc.core.rc_codes)
+ props->rc.core.rc_codes = RC_MAP_EMPTY;
+
return;
}
-static int af9015_rc_query(struct dvb_usb_device *d);
-
static int af9015_read_config(struct usb_device *udev)
{
int ret;
@@ -815,12 +824,10 @@ static int af9015_read_config(struct usb_device *udev)
deb_info("%s: IR mode:%d\n", __func__, val);
for (i = 0; i < af9015_properties_count; i++) {
- if (val == AF9015_IR_MODE_DISABLED) {
- af9015_properties[i].rc.core.rc_query = NULL;
- } else {
- af9015_properties[i].rc.core.rc_query = af9015_rc_query;
+ if (val == AF9015_IR_MODE_DISABLED)
+ af9015_properties[i].rc.core.rc_codes = NULL;
+ else
af9015_set_remote_config(udev, &af9015_properties[i]);
- }
}
/* TS mode - one or two receivers */
@@ -1005,67 +1012,43 @@ static int af9015_rc_query(struct dvb_usb_device *d)
{
struct af9015_state *priv = d->priv;
int ret;
- u8 repeat, keycode[4];
+ u8 buf[16];
/* read registers needed to detect remote controller code */
- /* TODO: Implement read multiple registers to reduce idle USB traffic.
- Currently three reads are needed for one idle rc polling. */
- ret = af9015_read_reg(d, 0x98df, &repeat);
+ ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf));
if (ret)
goto error;
- ret = af9015_read_reg(d, 0x98e7, &keycode[2]);
- if (ret)
- goto error;
-
- ret = af9015_read_reg(d, 0x98e8, &keycode[3]);
- if (ret)
- goto error;
-
- if (keycode[2] || keycode[3]) {
- /* read 1st address byte */
- ret = af9015_read_reg(d, 0x98e5, &keycode[0]);
- if (ret)
- goto error;
-
- /* read 2nd address byte */
- ret = af9015_read_reg(d, 0x98e6, &keycode[1]);
- if (ret)
- goto error;
-
- deb_rc("%s: key pressed ", __func__);
- debug_dump(keycode, sizeof(keycode), deb_rc);
-
- /* clean data bytes from mem */
- ret = af9015_write_reg(d, 0x98e7, 0);
- if (ret)
- goto error;
+ if (buf[14] || buf[15]) {
+ deb_rc("%s: key pressed %02x %02x %02x %02x\n", __func__,
+ buf[12], buf[13], buf[14], buf[15]);
- ret = af9015_write_reg(d, 0x98e8, 0);
+ /* clean IR code from mem */
+ ret = af9015_write_regs(d, 0x98e5, "\x00\x00\x00\x00", 4);
if (ret)
goto error;
- if (keycode[2] == (u8) ~keycode[3]) {
- if (keycode[0] == (u8) ~keycode[1]) {
+ if (buf[14] == (u8) ~buf[15]) {
+ if (buf[12] == (u8) ~buf[13]) {
/* NEC */
- priv->rc_keycode = keycode[0] << 8 | keycode[2];
+ priv->rc_keycode = buf[12] << 8 | buf[14];
} else {
/* NEC extended*/
- priv->rc_keycode = keycode[0] << 16 |
- keycode[1] << 8 | keycode[2];
+ priv->rc_keycode = buf[12] << 16 |
+ buf[13] << 8 | buf[14];
}
ir_keydown(d->rc_input_dev, priv->rc_keycode, 0);
} else {
priv->rc_keycode = 0; /* clear just for sure */
}
- } else if (priv->rc_repeat != repeat) {
+ } else if (priv->rc_repeat != buf[6] || buf[0]) {
deb_rc("%s: key repeated\n", __func__);
ir_keydown(d->rc_input_dev, priv->rc_keycode, 0);
} else {
deb_rc("%s: no key press\n", __func__);
}
- priv->rc_repeat = repeat;
+ priv->rc_repeat = buf[6];
error:
if (ret)
@@ -1358,6 +1341,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.rc.core = {
.protocol = IR_TYPE_NEC,
.module_name = "af9015",
+ .rc_query = af9015_rc_query,
.rc_interval = AF9015_RC_INTERVAL,
.rc_props = {
.allowed_protos = IR_TYPE_NEC,
@@ -1486,6 +1470,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.rc.core = {
.protocol = IR_TYPE_NEC,
.module_name = "af9015",
+ .rc_query = af9015_rc_query,
.rc_interval = AF9015_RC_INTERVAL,
.rc_props = {
.allowed_protos = IR_TYPE_NEC,
@@ -1599,6 +1584,7 @@ static struct dvb_usb_device_properties af9015_properties[] = {
.rc.core = {
.protocol = IR_TYPE_NEC,
.module_name = "af9015",
+ .rc_query = af9015_rc_query,
.rc_interval = AF9015_RC_INTERVAL,
.rc_props = {
.allowed_protos = IR_TYPE_NEC,

Privacy Policy