aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/rapidio
diff options
context:
space:
mode:
authorAlexandre Bounine <alexandre.bounine@idt.com>2016-08-02 21:07:03 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2016-08-02 23:35:38 (GMT)
commit0b9364b5cf11c6e504f4b77e24b15a0dc8a82df0 (patch)
tree23a16451c02f3dc0dc3b6ebf8f2068d56d70ff3b /drivers/rapidio
parentadff1649e6d66d9dda7631701eb98e8482edaff6 (diff)
rapidio/switches: add driver for IDT gen3 switches
Add RapidIO switch driver for IDT Gen3 switch devices: RXS1632 and RXS2448. [alexandre.bounine@idt.com: fixup for original driver patch] Link: http://lkml.kernel.org/r/1469137596-18241-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-14-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/rapidio')
-rw-r--r--drivers/rapidio/switches/Kconfig6
-rw-r--r--drivers/rapidio/switches/Makefile1
-rw-r--r--drivers/rapidio/switches/idt_gen3.c382
3 files changed, 389 insertions, 0 deletions
diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig
index 3458415..92767fd 100644
--- a/drivers/rapidio/switches/Kconfig
+++ b/drivers/rapidio/switches/Kconfig
@@ -22,3 +22,9 @@ config RAPIDIO_CPS_GEN2
default n
---help---
Includes support for ITD CPS Gen.2 serial RapidIO switches.
+
+config RAPIDIO_RXS_GEN3
+ tristate "IDT RXS Gen.3 SRIO switch support"
+ default n
+ ---help---
+ Includes support for ITD RXS Gen.3 serial RapidIO switches.
diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile
index 051cc6b..6bdd54c 100644
--- a/drivers/rapidio/switches/Makefile
+++ b/drivers/rapidio/switches/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o
obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o
obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o
obj-$(CONFIG_RAPIDIO_CPS_GEN2) += idt_gen2.o
+obj-$(CONFIG_RAPIDIO_RXS_GEN3) += idt_gen3.o
diff --git a/drivers/rapidio/switches/idt_gen3.c b/drivers/rapidio/switches/idt_gen3.c
new file mode 100644
index 0000000..c5923a5
--- /dev/null
+++ b/drivers/rapidio/switches/idt_gen3.c
@@ -0,0 +1,382 @@
+/*
+ * IDT RXS Gen.3 Serial RapidIO switch family support
+ *
+ * Copyright 2016 Integrated Device Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+
+#include <asm/page.h>
+#include "../rio.h"
+
+#define RIO_EM_PW_STAT 0x40020
+#define RIO_PW_CTL 0x40204
+#define RIO_PW_CTL_PW_TMR 0xffffff00
+#define RIO_PW_ROUTE 0x40208
+
+#define RIO_EM_DEV_INT_EN 0x40030
+
+#define RIO_PLM_SPx_IMP_SPEC_CTL(x) (0x10100 + (x)*0x100)
+#define RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST 0x02000000
+
+#define RIO_PLM_SPx_PW_EN(x) (0x10118 + (x)*0x100)
+#define RIO_PLM_SPx_PW_EN_OK2U 0x40000000
+#define RIO_PLM_SPx_PW_EN_LINIT 0x10000000
+
+#define RIO_BC_L2_Gn_ENTRYx_CSR(n, x) (0x31000 + (n)*0x400 + (x)*0x4)
+#define RIO_SPx_L2_Gn_ENTRYy_CSR(x, n, y) \
+ (0x51000 + (x)*0x2000 + (n)*0x400 + (y)*0x4)
+
+static int
+idtg3_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ u32 rval;
+ u32 entry = route_port;
+ int err = 0;
+
+ pr_debug("RIO: %s t=0x%x did_%x to p_%x\n",
+ __func__, table, route_destid, entry);
+
+ if (route_destid > 0xFF)
+ return -EINVAL;
+
+ if (route_port == RIO_INVALID_ROUTE)
+ entry = RIO_RT_ENTRY_DROP_PKT;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ /* Use broadcast register to update all per-port tables */
+ err = rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_BC_L2_Gn_ENTRYx_CSR(0, route_destid),
+ entry);
+ return err;
+ }
+
+ /*
+ * Verify that specified port/table number is valid
+ */
+ err = rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWP_INFO_CAR, &rval);
+ if (err)
+ return err;
+
+ if (table >= RIO_GET_TOTAL_PORTS(rval))
+ return -EINVAL;
+
+ err = rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid),
+ entry);
+ return err;
+}
+
+static int
+idtg3_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 rval;
+ int err;
+
+ if (route_destid > 0xFF)
+ return -EINVAL;
+
+ err = rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWP_INFO_CAR, &rval);
+ if (err)
+ return err;
+
+ /*
+ * This switch device does not have the dedicated global routing table.
+ * It is substituted by reading routing table of the ingress port of
+ * maintenance read requests.
+ */
+ if (table == RIO_GLOBAL_TABLE)
+ table = RIO_GET_PORT_NUM(rval);
+ else if (table >= RIO_GET_TOTAL_PORTS(rval))
+ return -EINVAL;
+
+ err = rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, route_destid),
+ &rval);
+ if (err)
+ return err;
+
+ if (rval == RIO_RT_ENTRY_DROP_PKT)
+ *route_port = RIO_INVALID_ROUTE;
+ else
+ *route_port = (u8)rval;
+
+ return 0;
+}
+
+static int
+idtg3_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 i;
+ u32 rval;
+ int err;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ for (i = 0; i <= 0xff; i++) {
+ err = rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_BC_L2_Gn_ENTRYx_CSR(0, i),
+ RIO_RT_ENTRY_DROP_PKT);
+ if (err)
+ break;
+ }
+
+ return err;
+ }
+
+ err = rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWP_INFO_CAR, &rval);
+ if (err)
+ return err;
+
+ if (table >= RIO_GET_TOTAL_PORTS(rval))
+ return -EINVAL;
+
+ for (i = 0; i <= 0xff; i++) {
+ err = rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_SPx_L2_Gn_ENTRYy_CSR(table, 0, i),
+ RIO_RT_ENTRY_DROP_PKT);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+
+/*
+ * This routine performs device-specific initialization only.
+ * All standard EM configuration should be performed at upper level.
+ */
+static int
+idtg3_em_init(struct rio_dev *rdev)
+{
+ int i, tmp;
+ u32 rval;
+
+ pr_debug("RIO: %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount);
+
+ /* Disable assertion of interrupt signal */
+ rio_write_config_32(rdev, RIO_EM_DEV_INT_EN, 0);
+
+ /* Disable port-write event notifications during initialization */
+ rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL,
+ RIO_EM_PW_TX_CTRL_PW_DIS);
+
+ /* Configure Port-Write notifications for hot-swap events */
+ tmp = RIO_GET_TOTAL_PORTS(rdev->swpinfo);
+ for (i = 0; i < tmp; i++) {
+
+ rio_read_config_32(rdev,
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, i),
+ &rval);
+ if (rval & RIO_PORT_N_ERR_STS_PORT_UA)
+ continue;
+
+ /* Clear events signaled before enabling notification */
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PN_ERR_DETECT(i), 0);
+
+ /* Enable event notifications */
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PN_ERRRATE_EN(i),
+ RIO_EM_PN_ERRRATE_EN_OK2U | RIO_EM_PN_ERRRATE_EN_U2OK);
+ /* Enable port-write generation on events */
+ rio_write_config_32(rdev, RIO_PLM_SPx_PW_EN(i),
+ RIO_PLM_SPx_PW_EN_OK2U | RIO_PLM_SPx_PW_EN_LINIT);
+
+ }
+
+ /* Set Port-Write destination port */
+ tmp = RIO_GET_PORT_NUM(rdev->swpinfo);
+ rio_write_config_32(rdev, RIO_PW_ROUTE, 1 << tmp);
+
+
+ /* Enable sending port-write event notifications */
+ rio_write_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0);
+
+ /* set TVAL = ~50us */
+ rio_write_config_32(rdev,
+ rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x8e << 8);
+ return 0;
+}
+
+
+/*
+ * idtg3_em_handler - device-specific error handler
+ *
+ * If the link is down (PORT_UNINIT) does nothing - this is considered
+ * as link partner removal from the port.
+ *
+ * If the link is up (PORT_OK) - situation is handled as *new* device insertion.
+ * In this case ERR_STOP bits are cleared by issuing soft reset command to the
+ * reporting port. Inbound and outbound ackIDs are cleared by the reset as well.
+ * This way the port is synchronized with freshly inserted device (assuming it
+ * was reset/powered-up on insertion).
+ *
+ * TODO: This is not sufficient in a situation when a link between two devices
+ * was down and up again (e.g. cable disconnect). For that situation full ackID
+ * realignment process has to be implemented.
+ */
+static int
+idtg3_em_handler(struct rio_dev *rdev, u8 pnum)
+{
+ u32 err_status;
+ u32 rval;
+
+ rio_read_config_32(rdev,
+ RIO_DEV_PORT_N_ERR_STS_CSR(rdev, pnum),
+ &err_status);
+
+ /* Do nothing for device/link removal */
+ if (err_status & RIO_PORT_N_ERR_STS_PORT_UNINIT)
+ return 0;
+
+ /* When link is OK we have a device insertion.
+ * Request port soft reset to clear errors if they present.
+ * Inbound and outbound ackIDs will be 0 after reset.
+ */
+ if (err_status & (RIO_PORT_N_ERR_STS_OUT_ES |
+ RIO_PORT_N_ERR_STS_INP_ES)) {
+ rio_read_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), &rval);
+ rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum),
+ rval | RIO_PLM_SPx_IMP_SPEC_CTL_SOFT_RST);
+ udelay(10);
+ rio_write_config_32(rdev, RIO_PLM_SPx_IMP_SPEC_CTL(pnum), rval);
+ msleep(500);
+ }
+
+ return 0;
+}
+
+static struct rio_switch_ops idtg3_switch_ops = {
+ .owner = THIS_MODULE,
+ .add_entry = idtg3_route_add_entry,
+ .get_entry = idtg3_route_get_entry,
+ .clr_table = idtg3_route_clr_table,
+ .em_init = idtg3_em_init,
+ .em_handle = idtg3_em_handler,
+};
+
+static int idtg3_probe(struct rio_dev *rdev, const struct rio_device_id *id)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+
+ spin_lock(&rdev->rswitch->lock);
+
+ if (rdev->rswitch->ops) {
+ spin_unlock(&rdev->rswitch->lock);
+ return -EINVAL;
+ }
+
+ rdev->rswitch->ops = &idtg3_switch_ops;
+
+ if (rdev->do_enum) {
+ /* Disable hierarchical routing support: Existing fabric
+ * enumeration/discovery process (see rio-scan.c) uses 8-bit
+ * flat destination ID routing only.
+ */
+ rio_write_config_32(rdev, 0x5000 + RIO_BC_RT_CTL_CSR, 0);
+ }
+
+ spin_unlock(&rdev->rswitch->lock);
+
+ return 0;
+}
+
+static void idtg3_remove(struct rio_dev *rdev)
+{
+ pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+ spin_lock(&rdev->rswitch->lock);
+ if (rdev->rswitch->ops == &idtg3_switch_ops)
+ rdev->rswitch->ops = NULL;
+ spin_unlock(&rdev->rswitch->lock);
+}
+
+/*
+ * Gen3 switches repeat sending PW messages until a corresponding event flag
+ * is cleared. Use shutdown notification to disable generation of port-write
+ * messages if their destination node is shut down.
+ */
+static void idtg3_shutdown(struct rio_dev *rdev)
+{
+ int i;
+ u32 rval;
+ u16 destid;
+
+ /* Currently the enumerator node acts also as PW handler */
+ if (!rdev->do_enum)
+ return;
+
+ pr_debug("RIO: %s(%s)\n", __func__, rio_name(rdev));
+
+ rio_read_config_32(rdev, RIO_PW_ROUTE, &rval);
+ i = RIO_GET_PORT_NUM(rdev->swpinfo);
+
+ /* Check port-write destination port */
+ if (!((1 << i) & rval))
+ return;
+
+ /* Disable sending port-write event notifications if PW destID
+ * matches to one of the enumerator node
+ */
+ rio_read_config_32(rdev, rdev->em_efptr + RIO_EM_PW_TGT_DEVID, &rval);
+
+ if (rval & RIO_EM_PW_TGT_DEVID_DEV16)
+ destid = rval >> 16;
+ else
+ destid = ((rval & RIO_EM_PW_TGT_DEVID_D8) >> 16);
+
+ if (rdev->net->hport->host_deviceid == destid) {
+ rio_write_config_32(rdev,
+ rdev->em_efptr + RIO_EM_PW_TX_CTRL, 0);
+ pr_debug("RIO: %s(%s) PW transmission disabled\n",
+ __func__, rio_name(rdev));
+ }
+}
+
+static struct rio_device_id idtg3_id_table[] = {
+ {RIO_DEVICE(RIO_DID_IDTRXS1632, RIO_VID_IDT)},
+ {RIO_DEVICE(RIO_DID_IDTRXS2448, RIO_VID_IDT)},
+ { 0, } /* terminate list */
+};
+
+static struct rio_driver idtg3_driver = {
+ .name = "idt_gen3",
+ .id_table = idtg3_id_table,
+ .probe = idtg3_probe,
+ .remove = idtg3_remove,
+ .shutdown = idtg3_shutdown,
+};
+
+static int __init idtg3_init(void)
+{
+ return rio_register_driver(&idtg3_driver);
+}
+
+static void __exit idtg3_exit(void)
+{
+ pr_debug("RIO: %s\n", __func__);
+ rio_unregister_driver(&idtg3_driver);
+ pr_debug("RIO: %s done\n", __func__);
+}
+
+device_initcall(idtg3_init);
+module_exit(idtg3_exit);
+
+MODULE_DESCRIPTION("IDT RXS Gen.3 Serial RapidIO switch family driver");
+MODULE_AUTHOR("Integrated Device Technology, Inc.");
+MODULE_LICENSE("GPL");

Privacy Policy