aboutsummaryrefslogtreecommitdiffstats
path: root/tools
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-15 15:50:49 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-15 15:50:49 -0700
commita95cfad947d5f40cfbf9ad3019575aac1d8ac7a6 (patch)
tree00050455c3bcd40ece9b811c9ad6ec8b33966091 /tools
parent1319a2856dfdd6b4613530e771fe108f00dfc661 (diff)
parent66f4bc819d71bb600f1c879c9a7161de1cc725f8 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) Track alignment in BPF verifier so that legitimate programs won't be rejected on !CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS architectures. 2) Make tail calls work properly in arm64 BPF JIT, from Deniel Borkmann. 3) Make the configuration and semantics Generic XDP make more sense and don't allow both generic XDP and a driver specific instance to be active at the same time. Also from Daniel. 4) Don't crash on resume in xen-netfront, from Vitaly Kuznetsov. 5) Fix use-after-free in VRF driver, from Gao Feng. 6) Use netdev_alloc_skb_ip_align() to avoid unaligned IP headers in qca_spi driver, from Stefan Wahren. 7) Always run cleanup routines in BPF samples when we get SIGTERM, from Andy Gospodarek. 8) The mdio phy code should bring PHYs out of reset using the shared GPIO lines before invoking bus->reset(). From Florian Fainelli. 9) Some USB descriptor access endian fixes in various drivers from Johan Hovold. 10) Handle PAUSE advertisements properly in mlx5 driver, from Gal Pressman. 11) Fix reversed test in mlx5e_setup_tc(), from Saeed Mahameed. 12) Cure netdev leak in AF_PACKET when using timestamping via control messages. From Douglas Caetano dos Santos. 13) netcp doesn't support HWTSTAMP_FILTER_ALl, reject it. From Miroslav Lichvar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits) ldmvsw: stop the clean timer at beginning of remove ldmvsw: unregistering netdev before disable hardware net: netcp: fix check of requested timestamping filter ipv6: avoid dad-failures for addresses with NODAD qed: Fix uninitialized data in aRFS infrastructure mdio: mux: fix device_node_continue.cocci warnings net/packet: fix missing net_device reference release net/mlx4_core: Use min3 to select number of MSI-X vectors macvlan: Fix performance issues with vlan tagged packets net: stmmac: use correct pointer when printing normal descriptor ring net/mlx5: Use underlay QPN from the root name space net/mlx5e: IPoIB, Only support regular RQ for now net/mlx5e: Fix setup TC ndo net/mlx5e: Fix ethtool pause support and advertise reporting net/mlx5e: Use the correct pause values for ethtool advertising vmxnet3: ensure that adapter is in proper state during force_close sfc: revert changes to NIC revision numbers net: ch9200: add missing USB-descriptor endianness conversions net: irda: irda-usb: fix firmware name on big-endian hosts net: dsa: mv88e6xxx: add default case to switch ...
Diffstat (limited to 'tools')
-rw-r--r--tools/build/feature/test-bpf.c1
-rw-r--r--tools/include/uapi/linux/bpf.h11
-rw-r--r--tools/lib/bpf/bpf.c22
-rw-r--r--tools/lib/bpf/bpf.h4
-rw-r--r--tools/testing/selftests/bpf/Makefile6
-rw-r--r--tools/testing/selftests/bpf/include/uapi/linux/types.h6
-rw-r--r--tools/testing/selftests/bpf/test_align.c453
7 files changed, 499 insertions, 4 deletions
diff --git a/tools/build/feature/test-bpf.c b/tools/build/feature/test-bpf.c
index ebc6dceddb58..7598361ef1f1 100644
--- a/tools/build/feature/test-bpf.c
+++ b/tools/build/feature/test-bpf.c
@@ -29,6 +29,7 @@ int main(void)
attr.log_size = 0;
attr.log_level = 0;
attr.kern_version = 0;
+ attr.prog_flags = 0;
/*
* Test existence of __NR_bpf and BPF_PROG_LOAD.
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index e553529929f6..94dfa9def355 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -132,6 +132,13 @@ enum bpf_attach_type {
*/
#define BPF_F_ALLOW_OVERRIDE (1U << 0)
+/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
+ * verifier will perform strict alignment checking as if the kernel
+ * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set,
+ * and NET_IP_ALIGN defined to 2.
+ */
+#define BPF_F_STRICT_ALIGNMENT (1U << 0)
+
#define BPF_PSEUDO_MAP_FD 1
/* flags for BPF_MAP_UPDATE_ELEM command */
@@ -177,6 +184,7 @@ union bpf_attr {
__u32 log_size; /* size of user buffer */
__aligned_u64 log_buf; /* user supplied buffer */
__u32 kern_version; /* checked when prog_type=kprobe */
+ __u32 prog_flags;
};
struct { /* anonymous struct used by BPF_OBJ_* commands */
@@ -481,8 +489,7 @@ union bpf_attr {
* u32 bpf_get_socket_uid(skb)
* Get the owner uid of the socket stored inside sk_buff.
* @skb: pointer to skb
- * Return: uid of the socket owner on success or 0 if the socket pointer
- * inside sk_buff is NULL
+ * Return: uid of the socket owner on success or overflowuid if failed.
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
diff --git a/tools/lib/bpf/bpf.c b/tools/lib/bpf/bpf.c
index 4fe444b8092e..6e178987af8e 100644
--- a/tools/lib/bpf/bpf.c
+++ b/tools/lib/bpf/bpf.c
@@ -117,6 +117,28 @@ int bpf_load_program(enum bpf_prog_type type, const struct bpf_insn *insns,
return sys_bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
}
+int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
+ size_t insns_cnt, int strict_alignment,
+ const char *license, __u32 kern_version,
+ char *log_buf, size_t log_buf_sz)
+{
+ union bpf_attr attr;
+
+ bzero(&attr, sizeof(attr));
+ attr.prog_type = type;
+ attr.insn_cnt = (__u32)insns_cnt;
+ attr.insns = ptr_to_u64(insns);
+ attr.license = ptr_to_u64(license);
+ attr.log_buf = ptr_to_u64(log_buf);
+ attr.log_size = log_buf_sz;
+ attr.log_level = 2;
+ log_buf[0] = 0;
+ attr.kern_version = kern_version;
+ attr.prog_flags = strict_alignment ? BPF_F_STRICT_ALIGNMENT : 0;
+
+ return sys_bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
+}
+
int bpf_map_update_elem(int fd, const void *key, const void *value,
__u64 flags)
{
diff --git a/tools/lib/bpf/bpf.h b/tools/lib/bpf/bpf.h
index edb4daeff7a5..972bd8333eb7 100644
--- a/tools/lib/bpf/bpf.h
+++ b/tools/lib/bpf/bpf.h
@@ -35,6 +35,10 @@ int bpf_load_program(enum bpf_prog_type type, const struct bpf_insn *insns,
size_t insns_cnt, const char *license,
__u32 kern_version, char *log_buf,
size_t log_buf_sz);
+int bpf_verify_program(enum bpf_prog_type type, const struct bpf_insn *insns,
+ size_t insns_cnt, int strict_alignment,
+ const char *license, __u32 kern_version,
+ char *log_buf, size_t log_buf_sz);
int bpf_map_update_elem(int fd, const void *key, const void *value,
__u64 flags);
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 91edd0566237..f389b02d43a0 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -11,7 +11,8 @@ endif
CFLAGS += -Wall -O2 -I$(APIDIR) -I$(LIBDIR) -I$(GENDIR) $(GENFLAGS) -I../../../include
LDLIBS += -lcap -lelf
-TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs
+TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
+ test_align
TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o
@@ -34,6 +35,7 @@ $(BPFOBJ): force
CLANG ?= clang
%.o: %.c
- $(CLANG) -I. -I../../../include/uapi -I../../../../samples/bpf/ \
+ $(CLANG) -I. -I./include/uapi -I../../../include/uapi \
+ -I../../../../samples/bpf/ \
-Wno-compare-distinct-pointer-types \
-O2 -target bpf -c $< -o $@
diff --git a/tools/testing/selftests/bpf/include/uapi/linux/types.h b/tools/testing/selftests/bpf/include/uapi/linux/types.h
new file mode 100644
index 000000000000..fbd16a7554af
--- /dev/null
+++ b/tools/testing/selftests/bpf/include/uapi/linux/types.h
@@ -0,0 +1,6 @@
+#ifndef _UAPI_LINUX_TYPES_H
+#define _UAPI_LINUX_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#endif /* _UAPI_LINUX_TYPES_H */
diff --git a/tools/testing/selftests/bpf/test_align.c b/tools/testing/selftests/bpf/test_align.c
new file mode 100644
index 000000000000..9644d4e069de
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_align.c
@@ -0,0 +1,453 @@
+#include <asm/types.h>
+#include <linux/types.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <errno.h>
+#include <string.h>
+#include <stddef.h>
+#include <stdbool.h>
+
+#include <linux/unistd.h>
+#include <linux/filter.h>
+#include <linux/bpf_perf_event.h>
+#include <linux/bpf.h>
+
+#include <bpf/bpf.h>
+
+#include "../../../include/linux/filter.h"
+
+#ifndef ARRAY_SIZE
+# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
+
+#define MAX_INSNS 512
+#define MAX_MATCHES 16
+
+struct bpf_align_test {
+ const char *descr;
+ struct bpf_insn insns[MAX_INSNS];
+ enum {
+ UNDEF,
+ ACCEPT,
+ REJECT
+ } result;
+ enum bpf_prog_type prog_type;
+ const char *matches[MAX_MATCHES];
+};
+
+static struct bpf_align_test tests[] = {
+ {
+ .descr = "mov",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_3, 2),
+ BPF_MOV64_IMM(BPF_REG_3, 4),
+ BPF_MOV64_IMM(BPF_REG_3, 8),
+ BPF_MOV64_IMM(BPF_REG_3, 16),
+ BPF_MOV64_IMM(BPF_REG_3, 32),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "1: R1=ctx R3=imm2,min_value=2,max_value=2,min_align=2 R10=fp",
+ "2: R1=ctx R3=imm4,min_value=4,max_value=4,min_align=4 R10=fp",
+ "3: R1=ctx R3=imm8,min_value=8,max_value=8,min_align=8 R10=fp",
+ "4: R1=ctx R3=imm16,min_value=16,max_value=16,min_align=16 R10=fp",
+ "5: R1=ctx R3=imm32,min_value=32,max_value=32,min_align=32 R10=fp",
+ },
+ },
+ {
+ .descr = "shift",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_3, 4),
+ BPF_MOV64_IMM(BPF_REG_4, 32),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "1: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R10=fp",
+ "2: R1=ctx R3=imm2,min_value=2,max_value=2,min_align=2 R10=fp",
+ "3: R1=ctx R3=imm4,min_value=4,max_value=4,min_align=4 R10=fp",
+ "4: R1=ctx R3=imm8,min_value=8,max_value=8,min_align=8 R10=fp",
+ "5: R1=ctx R3=imm16,min_value=16,max_value=16,min_align=16 R10=fp",
+ "6: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R10=fp",
+ "7: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm32,min_value=32,max_value=32,min_align=32 R10=fp",
+ "8: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm16,min_value=16,max_value=16,min_align=16 R10=fp",
+ "9: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm8,min_value=8,max_value=8,min_align=8 R10=fp",
+ "10: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm4,min_value=4,max_value=4,min_align=4 R10=fp",
+ "11: R1=ctx R3=imm1,min_value=1,max_value=1,min_align=1 R4=imm2,min_value=2,max_value=2,min_align=2 R10=fp",
+ },
+ },
+ {
+ .descr = "addsub",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_3, 4),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, 4),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_3, 2),
+ BPF_MOV64_IMM(BPF_REG_4, 8),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "1: R1=ctx R3=imm4,min_value=4,max_value=4,min_align=4 R10=fp",
+ "2: R1=ctx R3=imm8,min_value=8,max_value=8,min_align=4 R10=fp",
+ "3: R1=ctx R3=imm10,min_value=10,max_value=10,min_align=2 R10=fp",
+ "4: R1=ctx R3=imm10,min_value=10,max_value=10,min_align=2 R4=imm8,min_value=8,max_value=8,min_align=8 R10=fp",
+ "5: R1=ctx R3=imm10,min_value=10,max_value=10,min_align=2 R4=imm12,min_value=12,max_value=12,min_align=4 R10=fp",
+ "6: R1=ctx R3=imm10,min_value=10,max_value=10,min_align=2 R4=imm14,min_value=14,max_value=14,min_align=2 R10=fp",
+ },
+ },
+ {
+ .descr = "mul",
+ .insns = {
+ BPF_MOV64_IMM(BPF_REG_3, 7),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_3, 2),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_3, 4),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "1: R1=ctx R3=imm7,min_value=7,max_value=7,min_align=1 R10=fp",
+ "2: R1=ctx R3=imm7,min_value=7,max_value=7,min_align=1 R10=fp",
+ "3: R1=ctx R3=imm14,min_value=14,max_value=14,min_align=2 R10=fp",
+ "4: R1=ctx R3=imm56,min_value=56,max_value=56,min_align=4 R10=fp",
+ },
+ },
+
+#define PREP_PKT_POINTERS \
+ BPF_LDX_MEM(BPF_W, BPF_REG_2, BPF_REG_1, \
+ offsetof(struct __sk_buff, data)), \
+ BPF_LDX_MEM(BPF_W, BPF_REG_3, BPF_REG_1, \
+ offsetof(struct __sk_buff, data_end))
+
+#define LOAD_UNKNOWN(DST_REG) \
+ PREP_PKT_POINTERS, \
+ BPF_MOV64_REG(BPF_REG_0, BPF_REG_2), \
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 8), \
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_0, 1), \
+ BPF_EXIT_INSN(), \
+ BPF_LDX_MEM(BPF_B, DST_REG, BPF_REG_2, 0)
+
+ {
+ .descr = "unknown shift",
+ .insns = {
+ LOAD_UNKNOWN(BPF_REG_3),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_3, 1),
+ LOAD_UNKNOWN(BPF_REG_4),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_4, 5),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_ALU64_IMM(BPF_RSH, BPF_REG_4, 1),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R10=fp",
+ "8: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv55,min_align=2 R10=fp",
+ "9: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv54,min_align=4 R10=fp",
+ "10: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv53,min_align=8 R10=fp",
+ "11: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv52,min_align=16 R10=fp",
+ "18: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv56 R10=fp",
+ "19: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv51,min_align=32 R10=fp",
+ "20: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv52,min_align=16 R10=fp",
+ "21: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv53,min_align=8 R10=fp",
+ "22: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv54,min_align=4 R10=fp",
+ "23: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv55,min_align=2 R10=fp",
+ },
+ },
+ {
+ .descr = "unknown mul",
+ .insns = {
+ LOAD_UNKNOWN(BPF_REG_3),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_3),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 1),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_3),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 2),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_3),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 4),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_3),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 8),
+ BPF_ALU64_IMM(BPF_MUL, BPF_REG_4, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "7: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R10=fp",
+ "8: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv56 R10=fp",
+ "9: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv55,min_align=1 R10=fp",
+ "10: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv56 R10=fp",
+ "11: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv54,min_align=2 R10=fp",
+ "12: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv56 R10=fp",
+ "13: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv53,min_align=4 R10=fp",
+ "14: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv56 R10=fp",
+ "15: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv52,min_align=8 R10=fp",
+ "16: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=inv56 R4=inv50,min_align=8 R10=fp"
+ },
+ },
+ {
+ .descr = "packet const offset",
+ .insns = {
+ PREP_PKT_POINTERS,
+ BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+
+ /* Skip over ethernet header. */
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 14),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_5),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_4, 1),
+ BPF_EXIT_INSN(),
+
+ BPF_LDX_MEM(BPF_B, BPF_REG_4, BPF_REG_5, 0),
+ BPF_LDX_MEM(BPF_B, BPF_REG_4, BPF_REG_5, 1),
+ BPF_LDX_MEM(BPF_B, BPF_REG_4, BPF_REG_5, 2),
+ BPF_LDX_MEM(BPF_B, BPF_REG_4, BPF_REG_5, 3),
+ BPF_LDX_MEM(BPF_H, BPF_REG_4, BPF_REG_5, 0),
+ BPF_LDX_MEM(BPF_H, BPF_REG_4, BPF_REG_5, 2),
+ BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_5, 0),
+
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ "4: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R5=pkt(id=0,off=0,r=0) R10=fp",
+ "5: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R5=pkt(id=0,off=14,r=0) R10=fp",
+ "6: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=0) R3=pkt_end R4=pkt(id=0,off=14,r=0) R5=pkt(id=0,off=14,r=0) R10=fp",
+ "10: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=18) R3=pkt_end R4=inv56 R5=pkt(id=0,off=14,r=18) R10=fp",
+ "14: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=18) R3=pkt_end R4=inv48 R5=pkt(id=0,off=14,r=18) R10=fp",
+ "15: R0=imm0,min_value=0,max_value=0,min_align=2147483648 R1=ctx R2=pkt(id=0,off=0,r=18) R3=pkt_end R4=inv48 R5=pkt(id=0,off=14,r=18) R10=fp",
+ },
+ },
+ {
+ .descr = "packet variable offset",
+ .insns = {
+ LOAD_UNKNOWN(BPF_REG_6),
+ BPF_ALU64_IMM(BPF_LSH, BPF_REG_6, 2),
+
+ /* First, add a constant to the R5 packet pointer,
+ * then a variable with a known alignment.
+ */
+ BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 14),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_5, BPF_REG_6),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_5),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_4, 1),
+ BPF_EXIT_INSN(),
+ BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_5, 0),
+
+ /* Now, test in the other direction. Adding first
+ * the variable offset to R5, then the constant.
+ */
+ BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_5, BPF_REG_6),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 14),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_5),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_4, 1),
+ BPF_EXIT_INSN(),
+ BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_5, 0),
+
+ /* Test multiple accumulations of unknown values
+ * into a packet pointer.
+ */
+ BPF_MOV64_REG(BPF_REG_5, BPF_REG_2),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 14),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_5, BPF_REG_6),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_5, 4),
+ BPF_ALU64_REG(BPF_ADD, BPF_REG_5, BPF_REG_6),
+ BPF_MOV64_REG(BPF_REG_4, BPF_REG_5),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_4, 4),
+ BPF_JMP_REG(BPF_JGE, BPF_REG_3, BPF_REG_4, 1),
+ BPF_EXIT_INSN(),
+ BPF_LDX_MEM(BPF_W, BPF_REG_4, BPF_REG_5, 0),
+
+ BPF_MOV64_IMM(BPF_REG_0, 0),
+ BPF_EXIT_INSN(),
+ },
+ .prog_type = BPF_PROG_TYPE_SCHED_CLS,
+ .matches = {
+ /* Calculated offset in R6 has unknown value, but known
+ * alignment of 4.
+ */
+ "8: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R6=inv54,min_align=4 R10=fp",
+
+ /* Offset is added to packet pointer R5, resulting in known
+ * auxiliary alignment and offset.
+ */
+ "11: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R5=pkt(id=1,off=0,r=0),aux_off=14,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+ /* At the time the word size load is performed from R5,
+ * it's total offset is NET_IP_ALIGN + reg->off (0) +
+ * reg->aux_off (14) which is 16. Then the variable
+ * offset is considered using reg->aux_off_align which
+ * is 4 and meets the load's requirements.
+ */
+ "15: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=pkt(id=1,off=4,r=4),aux_off=14,aux_off_align=4 R5=pkt(id=1,off=0,r=4),aux_off=14,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+
+ /* Variable offset is added to R5 packet pointer,
+ * resulting in auxiliary alignment of 4.
+ */
+ "18: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off=14,aux_off_align=4 R5=pkt(id=2,off=0,r=0),aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+ /* Constant offset is added to R5, resulting in
+ * reg->off of 14.
+ */
+ "19: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off=14,aux_off_align=4 R5=pkt(id=2,off=14,r=0),aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+ /* At the time the word size load is performed from R5,
+ * it's total offset is NET_IP_ALIGN + reg->off (14) which
+ * is 16. Then the variable offset is considered using
+ * reg->aux_off_align which is 4 and meets the load's
+ * requirements.
+ */
+ "23: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=pkt(id=2,off=18,r=18),aux_off_align=4 R5=pkt(id=2,off=14,r=18),aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+
+ /* Constant offset is added to R5 packet pointer,
+ * resulting in reg->off value of 14.
+ */
+ "26: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off_align=4 R5=pkt(id=0,off=14,r=8) R6=inv54,min_align=4 R10=fp",
+ /* Variable offset is added to R5, resulting in an
+ * auxiliary offset of 14, and an auxiliary alignment of 4.
+ */
+ "27: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off_align=4 R5=pkt(id=3,off=0,r=0),aux_off=14,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+ /* Constant is added to R5 again, setting reg->off to 4. */
+ "28: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off_align=4 R5=pkt(id=3,off=4,r=0),aux_off=14,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+ /* And once more we add a variable, which causes an accumulation
+ * of reg->off into reg->aux_off_align, with resulting value of
+ * 18. The auxiliary alignment stays at 4.
+ */
+ "29: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=inv,aux_off_align=4 R5=pkt(id=4,off=0,r=0),aux_off=18,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+ /* At the time the word size load is performed from R5,
+ * it's total offset is NET_IP_ALIGN + reg->off (0) +
+ * reg->aux_off (18) which is 20. Then the variable offset
+ * is considered using reg->aux_off_align which is 4 and meets
+ * the load's requirements.
+ */
+ "33: R0=pkt(id=0,off=8,r=8) R1=ctx R2=pkt(id=0,off=0,r=8) R3=pkt_end R4=pkt(id=4,off=4,r=4),aux_off=18,aux_off_align=4 R5=pkt(id=4,off=0,r=4),aux_off=18,aux_off_align=4 R6=inv54,min_align=4 R10=fp",
+ },
+ },
+};
+
+static int probe_filter_length(const struct bpf_insn *fp)
+{
+ int len;
+
+ for (len = MAX_INSNS - 1; len > 0; --len)
+ if (fp[len].code != 0 || fp[len].imm != 0)
+ break;
+ return len + 1;
+}
+
+static char bpf_vlog[32768];
+
+static int do_test_single(struct bpf_align_test *test)
+{
+ struct bpf_insn *prog = test->insns;
+ int prog_type = test->prog_type;
+ int prog_len, i;
+ int fd_prog;
+ int ret;
+
+ prog_len = probe_filter_length(prog);
+ fd_prog = bpf_verify_program(prog_type ? : BPF_PROG_TYPE_SOCKET_FILTER,
+ prog, prog_len, 1, "GPL", 0,
+ bpf_vlog, sizeof(bpf_vlog));
+ if (fd_prog < 0) {
+ printf("Failed to load program.\n");
+ printf("%s", bpf_vlog);
+ ret = 1;
+ } else {
+ ret = 0;
+ for (i = 0; i < MAX_MATCHES; i++) {
+ const char *t, *m = test->matches[i];
+
+ if (!m)
+ break;
+ t = strstr(bpf_vlog, m);
+ if (!t) {
+ printf("Failed to find match: %s\n", m);
+ ret = 1;
+ printf("%s", bpf_vlog);
+ break;
+ }
+ }
+ close(fd_prog);
+ }
+ return ret;
+}
+
+static int do_test(unsigned int from, unsigned int to)
+{
+ int all_pass = 0;
+ int all_fail = 0;
+ unsigned int i;
+
+ for (i = from; i < to; i++) {
+ struct bpf_align_test *test = &tests[i];
+ int fail;
+
+ printf("Test %3d: %s ... ",
+ i, test->descr);
+ fail = do_test_single(test);
+ if (fail) {
+ all_fail++;
+ printf("FAIL\n");
+ } else {
+ all_pass++;
+ printf("PASS\n");
+ }
+ }
+ printf("Results: %d pass %d fail\n",
+ all_pass, all_fail);
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ unsigned int from = 0, to = ARRAY_SIZE(tests);
+
+ if (argc == 3) {
+ unsigned int l = atoi(argv[argc - 2]);
+ unsigned int u = atoi(argv[argc - 1]);
+
+ if (l < to && u < to) {
+ from = l;
+ to = u + 1;
+ }
+ } else if (argc == 2) {
+ unsigned int t = atoi(argv[argc - 1]);
+
+ if (t < to) {
+ from = t;
+ to = t + 1;
+ }
+ }
+ return do_test(from, to);
+}

Privacy Policy