aboutsummaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook2-8/+7
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21block/laptop_mode: Convert timers to use timer_setup()Kees Cook1-5/+5
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Jens Axboe <axboe@kernel.dk> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Jeff Layton <jlayton@redhat.com> Cc: linux-block@vger.kernel.org Cc: linux-mm@kvack.org Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-17Merge branch 'work.iov_iter' of ↵Linus Torvalds2-126/+73
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull iov_iter updates from Al Viro: - bio_{map,copy}_user_iov() series; those are cleanups - fixes from the same pile went into mainline (and stable) in late September. - fs/iomap.c iov_iter-related fixes - new primitive - iov_iter_for_each_range(), which applies a function to kernel-mapped segments of an iov_iter. Usable for kvec and bvec ones, the latter does kmap()/kunmap() around the callback. _Not_ usable for iovec- or pipe-backed iov_iter; the latter is not hard to fix if the need ever appears, the former is by design. Another related primitive will have to wait for the next cycle - it passes page + offset + size instead of pointer + size, and that one will be usable for everything _except_ kvec. Unfortunately, that one didn't get exposure in -next yet, so... - a bit more lustre iov_iter work, including a use case for iov_iter_for_each_range() (checksum calculation) - vhost/scsi leak fix in failure exit - misc cleanups and detritectomy... * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (21 commits) iomap_dio_actor(): fix iov_iter bugs switch ksocknal_lib_recv_...() to use of iov_iter_for_each_range() lustre: switch struct ksock_conn to iov_iter vhost/scsi: switch to iov_iter_get_pages() fix a page leak in vhost_scsi_iov_to_sgl() error recovery new primitive: iov_iter_for_each_range() lnet_return_rx_credits_locked: don't abuse list_entry xen: don't open-code iov_iter_kvec() orangefs: remove detritus from struct orangefs_kiocb_s kill iov_shorten() bio_alloc_map_data(): do bmd->iter setup right there bio_copy_user_iov(): saner bio size calculation bio_map_user_iov(): get rid of copying iov_iter bio_copy_from_iter(): get rid of copying iov_iter move more stuff down into bio_copy_user_iov() blk_rq_map_user_iov(): move iov_iter_advance() down bio_map_user_iov(): get rid of the iov_for_each() bio_map_user_iov(): move alignment check into the main loop don't rely upon subsequent bio_add_pc_page() calls failing ... and with iov_iter_get_pages_alloc() it becomes even simpler ...
2017-11-17Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds6-76/+199
Pull more block layer updates from Jens Axboe: "A followup pull request, with some parts that either needed a bit more testing before going in, merge sync, or just later arriving fixes. This contains: - Timer related updates from Kees. These were purposefully delayed since I didn't want to pull in a later v4.14-rc tag to my block tree. - ide-cd prep sense buffer fix from Bart. Also delayed, as not to clash with the late fix we put into 4.14-rc. - Small BFQ updates series from Luca and Paolo. - Single nvmet fix from James, fixing a non-functional case there. - Bio fast clone fix from Michael, which made bcache return the wrong data for some cases. - Legacy IO path regression hang fix from Ming" * 'for-linus' of git://git.kernel.dk/linux-block: bio: ensure __bio_clone_fast copies bi_partno nvmet_fc: fix better length checking block: wake up all tasks blocked in get_request() block, bfq: move debug blkio stats behind CONFIG_DEBUG_BLK_CGROUP block, bfq: update blkio stats outside the scheduler lock block, bfq: add missing invocations of bfqg_stats_update_io_add/remove doc, block, bfq: update max IOPS sustainable with BFQ ide: Make ide_cdrom_prep_fs() initialize the sense buffer pointer md: Convert timers to use timer_setup() block: swim3: Convert timers to use timer_setup() block/aoe: Convert timers to use timer_setup() amifloppy: Convert timers to use timer_setup() block/floppy: Convert callback to pass timer_list
2017-11-17bio: ensure __bio_clone_fast copies bi_partnoMichael Lyle1-0/+1
A new field was introduced in 74d46992e0d9, bi_partno, instead of using bdev->bd_contains and encoding the partition information in the bi_bdev field. __bio_clone_fast was changed to copy the disk information, but not the partition information. At minimum, this regressed bcache and caused data corruption. Signed-off-by: Michael Lyle <mlyle@lyle.org> Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reported-by: Pavel Goran <via-bcache@pvgoran.name> Reported-by: Campbell Steven <casteven@gmail.com> Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: <stable@vger.kernel.org> # 4.14 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-15block: wake up all tasks blocked in get_request()Ming Lei1-2/+2
Once blk_set_queue_dying() is done in blk_cleanup_queue(), we call blk_freeze_queue() and wait for q->q_usage_counter becoming zero. But if there are tasks blocked in get_request(), q->q_usage_counter can never become zero. So we have to wake up all these tasks in blk_set_queue_dying() first. Fixes: 3ef28e83ab157997 ("block: generic request_queue reference counting") Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-15block/blk-mq.c: use kmalloc_array_node()Johannes Thumshirn1-1/+1
Now that we have a NUMA-aware version of kmalloc_array() we can use it instead of kmalloc_node() without an overflow check in the size calculation. Link: http://lkml.kernel.org/r/20170927082038.3782-3-jthumshirn@suse.de Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Mike Marciniszyn <infinipath@intel.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-14block, bfq: move debug blkio stats behind CONFIG_DEBUG_BLK_CGROUPLuca Miccio3-73/+93
BFQ currently creates, and updates, its own instance of the whole set of blkio statistics that cfq creates. Yet, from the comments of Tejun Heo in [1], it turned out that most of these statistics are meant/useful only for debugging. This commit makes BFQ create the latter, debugging statistics only if the option CONFIG_DEBUG_BLK_CGROUP is set. By doing so, this commit also enables BFQ to enjoy a high perfomance boost. The reason is that, if CONFIG_DEBUG_BLK_CGROUP is not set, then BFQ has to update far fewer statistics, and, in particular, not the heaviest to update. To give an idea of the benefits, if CONFIG_DEBUG_BLK_CGROUP is not set, then, on an Intel i7-4850HQ, and with 8 threads doing random I/O in parallel on null_blk (configured with 0 latency), the throughput of BFQ grows from 310 to 400 KIOPS (+30%). We have measured similar or even much higher boosts with other CPUs: e.g., +45% with an ARM CortexTM-A53 Octa-core. Our results have been obtained and can be reproduced very easily with the script in [1]. [1] https://www.spinics.net/lists/linux-block/msg18943.html Suggested-by: Tejun Heo <tj@kernel.org> Suggested-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Luca Miccio <lucmiccio@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14block, bfq: update blkio stats outside the scheduler lockPaolo Valente2-12/+99
bfq invokes various blkg_*stats_* functions to update the statistics contained in the special files blkio.bfq.* in the blkio controller groups, i.e., the I/O accounting related to the proportional-share policy provided by bfq. The execution of these functions takes a considerable percentage, about 40%, of the total per-request execution time of bfq (i.e., of the sum of the execution time of all the bfq functions that have to be executed to process an I/O request from its creation to its destruction). This reduces the request-processing rate sustainable by bfq noticeably, even on a multicore CPU. In fact, the bfq functions that invoke blkg_*stats_* functions cannot be executed in parallel with the rest of the code of bfq, because both are executed under the same same per-device scheduler lock. To reduce this slowdown, this commit moves, wherever possible, the invocation of these functions (more precisely, of the bfq functions that invoke blkg_*stats_* functions) outside the critical sections protected by the scheduler lock. With this change, and with all blkio.bfq.* statistics enabled, the throughput grows, e.g., from 250 to 310 KIOPS (+25%) on an Intel i7-4850HQ, in case of 8 threads doing random I/O in parallel on null_blk, with the latter configured with 0 latency. We obtained the same or higher throughput boosts, up to +30%, with other processors (some figures are reported in the documentation). For our tests, we used the script [1], with which our results can be easily reproduced. NOTE. This commit still protects the invocation of blkg_*stats_* functions with the request_queue lock, because the group these functions are invoked on may otherwise disappear before or while these functions are executed. Fortunately, tests without even this lock show, by difference, that the serialization caused by this lock has a little impact (at most ~5% of throughput reduction). [1] https://github.com/Algodev-github/IOSpeed Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Luca Miccio <lucmiccio@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14block, bfq: add missing invocations of bfqg_stats_update_io_add/removeLuca Miccio1-3/+18
bfqg_stats_update_io_add and bfqg_stats_update_io_remove are to be invoked, respectively, when an I/O request enters and when an I/O request exits the scheduler. Unfortunately, bfq does not fully comply with this scheme, because it does not invoke these functions for requests that are inserted into or extracted from its priority dispatch list. This commit fixes this mistake. Tested-by: Lee Tibbert <lee.tibbert@gmail.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Luca Miccio <lucmiccio@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-1/+1
Pull MD update from Shaohua Li: "This update mostly includes bug fixes: - md-cluster now supports raid10 from Guoqing - raid5 PPL fixes from Artur - badblock regression fix from Bo - suspend hang related fixes from Neil - raid5 reshape fixes from Neil - raid1 freeze deadlock fix from Nate - memleak fixes from Zdenek - bitmap related fixes from Me and Tao - other fixes and cleanups" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (33 commits) md: free unused memory after bitmap resize md: release allocated bitset sync_set md/bitmap: clear BITMAP_WRITE_ERROR bit before writing it to sb md: be cautious about using ->curr_resync_completed for ->recovery_offset badblocks: fix wrong return value in badblocks_set if badblocks are disabled md: don't check MD_SB_CHANGE_CLEAN in md_allow_write md-cluster: update document for raid10 md: remove redundant variable q raid1: remove obsolete code in raid1_write_request md-cluster: Use a small window for raid10 resync md-cluster: Suspend writes in RAID10 if within range md-cluster/raid10: set "do_balance = 0" if area is resyncing md: use lockdep_assert_held raid1: prevent freeze_array/wait_all_barriers deadlock md: use TASK_IDLE instead of blocking signals md: remove special meaning of ->quiesce(.., 2) md: allow metadata update while suspending. md: use mddev_suspend/resume instead of ->quiesce() md: move suspend_hi/lo handling into core md code md: don't call bitmap_create() while array is quiesced. ...
2017-11-14Merge branch 'for-4.15/block' of git://git.kernel.dk/linux-blockLinus Torvalds26-616/+1097
Pull core block layer updates from Jens Axboe: "This is the main pull request for block storage for 4.15-rc1. Nothing out of the ordinary in here, and no API changes or anything like that. Just various new features for drivers, core changes, etc. In particular, this pull request contains: - A patch series from Bart, closing the whole on blk/scsi-mq queue quescing. - A series from Christoph, building towards hidden gendisks (for multipath) and ability to move bio chains around. - NVMe - Support for native multipath for NVMe (Christoph). - Userspace notifications for AENs (Keith). - Command side-effects support (Keith). - SGL support (Chaitanya Kulkarni) - FC fixes and improvements (James Smart) - Lots of fixes and tweaks (Various) - bcache - New maintainer (Michael Lyle) - Writeback control improvements (Michael) - Various fixes (Coly, Elena, Eric, Liang, et al) - lightnvm updates, mostly centered around the pblk interface (Javier, Hans, and Rakesh). - Removal of unused bio/bvec kmap atomic interfaces (me, Christoph) - Writeback series that fix the much discussed hundreds of millions of sync-all units. This goes all the way, as discussed previously (me). - Fix for missing wakeup on writeback timer adjustments (Yafang Shao). - Fix laptop mode on blk-mq (me). - {mq,name} tupple lookup for IO schedulers, allowing us to have alias names. This means you can use 'deadline' on both !mq and on mq (where it's called mq-deadline). (me). - blktrace race fix, oopsing on sg load (me). - blk-mq optimizations (me). - Obscure waitqueue race fix for kyber (Omar). - NBD fixes (Josef). - Disable writeback throttling by default on bfq, like we do on cfq (Luca Miccio). - Series from Ming that enable us to treat flush requests on blk-mq like any other request. This is a really nice cleanup. - Series from Ming that improves merging on blk-mq with schedulers, getting us closer to flipping the switch on scsi-mq again. - BFQ updates (Paolo). - blk-mq atomic flags memory ordering fixes (Peter Z). - Loop cgroup support (Shaohua). - Lots of minor fixes from lots of different folks, both for core and driver code" * 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits) nvme: fix visibility of "uuid" ns attribute blk-mq: fixup some comment typos and lengths ide: ide-atapi: fix compile error with defining macro DEBUG blk-mq: improve tag waiting setup for non-shared tags brd: remove unused brd_mutex blk-mq: only run the hardware queue if IO is pending block: avoid null pointer dereference on null disk fs: guard_bio_eod() needs to consider partitions xtensa/simdisk: fix compile error nvme: expose subsys attribute to sysfs nvme: create 'slaves' and 'holders' entries for hidden controllers block: create 'slaves' and 'holders' entries for hidden gendisks nvme: also expose the namespace identification sysfs files for mpath nodes nvme: implement multipath access to nvme subsystems nvme: track shared namespaces nvme: introduce a nvme_ns_ids structure nvme: track subsystems block, nvme: Introduce blk_mq_req_flags_t block, scsi: Make SCSI quiesce and resume work reliably block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag ...
2017-11-10blk-mq: fixup some comment typos and lengthsJens Axboe1-7/+10
Various typos and/or spelling errors in comments. Fixes a few > 80 char lines as well. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: improve tag waiting setup for non-shared tagsJens Axboe1-26/+55
If we run out of driver tags, we currently treat shared and non-shared tags the same - both cases hook into the tag waitqueue. This is a bit more costly than it needs to be on unshared tags, since we have to both grab the hctx lock, and the waitqueue lock (and disable interrupts). For the non-shared case, we can simply mark the queue as needing a restart. Split blk_mq_dispatch_wait_add() to account for both cases, and rename it to blk_mq_mark_tag_wait() to better reflect what it does now. Without this patch, shared and non-shared performance is about the same with 4 fio thread hammering on a single null_blk device (~410K, at 75% sys). With the patch, the shared case is the same, but the non-shared tags case runs at 431K at 71% sys. Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: only run the hardware queue if IO is pendingJens Axboe3-15/+12
Currently we are inconsistent in when we decide to run the queue. Using blk_mq_run_hw_queues() we check if the hctx has pending IO before running it, but we don't do that from the individual queue run function, blk_mq_run_hw_queue(). This results in a lot of extra and pointless queue runs, potentially, on flush requests and (much worse) on tag starvation situations. This is observable just looking at top output, with lots of kworkers active. For the !async runs, it just adds to the CPU overhead of blk-mq. Move the has-pending check into the run function instead of having callers do it. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: avoid null pointer dereference on null diskColin Ian King1-1/+1
It is possible that the pointer disk can be null and hence we can get a null pointer deference when accessing disk->flags. Add a null pointer check to avoid the dereference. Detected by CoverityScan, CID#1461133 ("Explicit null dereferenced") Fixes: 8ddcd653257c ("block: introduce GENHD_FL_HIDDEN") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: create 'slaves' and 'holders' entries for hidden gendisksHannes Reinecke1-7/+7
When creating nvme multipath devices we should populate the 'slaves' and 'holders' directorys properly to aid userspace topology detection. Signed-off-by: Hannes Reinecke <hare@suse.com> [hch: split from a larger patch] Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block, nvme: Introduce blk_mq_req_flags_tBart Van Assche3-9/+9
Several block layer and NVMe core functions accept a combination of BLK_MQ_REQ_* flags through the 'flags' argument but there is no verification at compile time whether the right type of block layer flags is passed. Make it possible for sparse to verify this. This patch does not change any functionality. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: linux-nvme@lists.infradead.org Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block, scsi: Make SCSI quiesce and resume work reliablyBart Van Assche2-10/+36
The contexts from which a SCSI device can be quiesced or resumed are: * Writing into /sys/class/scsi_device/*/device/state. * SCSI parallel (SPI) domain validation. * The SCSI device power management methods. See also scsi_bus_pm_ops. It is essential during suspend and resume that neither the filesystem state nor the filesystem metadata in RAM changes. This is why while the hibernation image is being written or restored that SCSI devices are quiesced. The SCSI core quiesces devices through scsi_device_quiesce() and scsi_device_resume(). In the SDEV_QUIESCE state execution of non-preempt requests is deferred. This is realized by returning BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI devices. Avoid that a full queue prevents power management requests to be submitted by deferring allocation of non-preempt requests for devices in the quiesced state. This patch has been tested by running the following commands and by verifying that after each resume the fio job was still running: for ((i=0; i<10; i++)); do ( cd /sys/block/md0/md && while true; do [ "$(<sync_action)" = "idle" ] && echo check > sync_action sleep 1 done ) & pids=($!) for d in /sys/class/block/sd*[a-z]; do bdev=${d#/sys/class/block/} hcil=$(readlink "$d/device") hcil=${hcil#../../../} echo 4 > "$d/queue/nr_requests" echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth" fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 \ --rw=randread --ioengine=libaio --numjobs=4 --iodepth=16 \ --iodepth_batch=1 --thread --loops=$((2**31)) & pids+=($!) done sleep 1 echo "$(date) Hibernating ..." >>hibernate-test-log.txt systemctl hibernate sleep 10 kill "${pids[@]}" echo idle > /sys/block/md0/md/sync_action wait echo "$(date) Done." >>hibernate-test-log.txt done Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flagBart Van Assche2-0/+31
This flag will be used in the next patch to let the block layer core know whether or not a SCSI request queue has been quiesced. A quiesced SCSI queue namely only processes RQF_PREEMPT requests. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: Introduce BLK_MQ_REQ_PREEMPTBart Van Assche2-1/+5
Set RQF_PREEMPT if BLK_MQ_REQ_PREEMPT is passed to blk_get_request_flags(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: Introduce blk_get_request_flags()Bart Van Assche1-15/+35
A side effect of this patch is that the GFP mask that is passed to several allocation functions in the legacy block layer is changed from GFP_KERNEL into __GFP_DIRECT_RECLAIM. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: Make q_usage_counter also track legacy requestsMing Lei2-8/+14
This patch makes it possible to pause request allocation for the legacy block layer by calling blk_mq_freeze_queue() and blk_mq_unfreeze_queue(). Signed-off-by: Ming Lei <ming.lei@redhat.com> [ bvanassche: Combined two patches into one, edited a comment and made sure REQ_NOWAIT is handled properly in blk_old_get_request() ] Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Tested-by: Martin Steigerwald <martin@lichtvoll.de> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: fix issue with shared tag queue re-runningJens Axboe2-38/+48
This patch attempts to make the case of hctx re-running on driver tag failure more robust. Without this patch, it's pretty easy to trigger a stall condition with shared tags. An example is using null_blk like this: modprobe null_blk queue_mode=2 nr_devices=4 shared_tags=1 submit_queues=1 hw_queue_depth=1 which sets up 4 devices, sharing the same tag set with a depth of 1. Running a fio job ala: [global] bs=4k rw=randread norandommap direct=1 ioengine=libaio iodepth=4 [nullb0] filename=/dev/nullb0 [nullb1] filename=/dev/nullb1 [nullb2] filename=/dev/nullb2 [nullb3] filename=/dev/nullb3 will inevitably end with one or more threads being stuck waiting for a scheduler tag. That IO is then stuck forever, until someone else triggers a run of the queue. Ensure that we always re-run the hardware queue, if the driver tag we were waiting for got freed before we added our leftover request entries back on the dispatch list. Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Tested-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: Avoid that request queue removal can trigger list corruptionBart Van Assche1-0/+1
Avoid that removal of a request queue sporadically triggers the following warning: list_del corruption. next->prev should be ffff8807d649b970, but was 6b6b6b6b6b6b6b6b WARNING: CPU: 3 PID: 342 at lib/list_debug.c:56 __list_del_entry_valid+0x92/0xa0 Call Trace: process_one_work+0x11b/0x660 worker_thread+0x3d/0x3b0 kthread+0x129/0x140 ret_from_fork+0x27/0x40 Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10blk-mq: put driver tag if dispatch budget can't be gotMing Lei1-1/+3
We have to put the driver tag if dispatch budget can't be got, otherwise it might cause IO deadlock, especially in case that size of tags is very small. Fixes: de1482974080(blk-mq: introduce .get_budget and .put_budget in blk_mq_ops) Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: pass full fmode_t to blk_verify_commandChristoph Hellwig2-14/+12
Use the obvious calling convention. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10block: remove __bio_kmap_atomicChristoph Hellwig1-1/+1
This helper doesn't buy us much over calling kmap_atomic directly. In fact in the only caller it does a bit of useless work as the caller already has the bvec at hand, and said caller would even buggy for a multi-segment bio due to the use of this helper. So just remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-10Revert "blk-mq: don't handle TAG_SHARED in restart"Jens Axboe1-4/+74
This reverts commit 358a3a6bccb74da9d63a26b2dd5f09f1e9970e0b. We have cases that aren't covered 100% in the drivers, so for now we have to retain the shared tag restart loops. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-07Merge branch 'linus' into locking/core, to resolve conflictsIngo Molnar43-0/+43
Conflicts: include/linux/compiler-clang.h include/linux/compiler-gcc.h include/linux/compiler-intel.h include/uapi/linux/stddef.h Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04blk-mq: don't allocate driver tag upfront for flush rqMing Lei3-81/+37
The idea behind it is simple: 1) for none scheduler, driver tag has to be borrowed for flush rq, otherwise we may run out of tag, and that causes an IO hang. And get/put driver tag is actually noop for none, so reordering tags isn't necessary at all. 2) for a real I/O scheduler, we need not allocate a driver tag upfront for flush rq. It works just fine to follow the same approach as normal requests: allocate driver tag for each rq just before calling ->queue_rq(). One driver visible change is that the driver tag isn't shared in the flush request sequence. That won't be a problem, since we always do that in legacy path. Then flush rq need not be treated specially wrt. get/put driver tag. This cleans up the code - for instance, reorder_tags_to_front() can be removed, and we needn't worry about request ordering in dispatch list for avoiding I/O deadlock. Also we have to put the driver tag before requeueing. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-mq: move blk_mq_put_driver_tag*() into blk-mq.hMing Lei2-32/+33
We need this helper to put the driver tag for flush rq, since we will not share tag in the flush request sequence in the following patch in case that I/O scheduler is applied. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-mq-sched: decide how to handle flush rq via RQF_FLUSH_SEQMing Lei1-13/+16
In case of IO scheduler we always pre-allocate one driver tag before calling blk_insert_flush(), and flush request will be marked as RQF_FLUSH_SEQ once it is in flush machinery. So if RQF_FLUSH_SEQ isn't set, we call blk_insert_flush() to handle the request, otherwise the flush request is dispatched to ->dispatch list directly. This is a preparation patch for not preallocating a driver tag for flush requests, and for not treating flush requests as a special case. This is similar to what the legacy path does. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-flush: use blk_mq_request_bypass_insert()Ming Lei1-1/+1
In the following patch, we will use RQF_FLUSH_SEQ to decide: 1) if the flag isn't set, the flush rq need to be inserted via blk_insert_flush() 2) otherwise, the flush rq need to be dispatched directly since it is in flush machinery now. So we use blk_mq_request_bypass_insert() for requests of bypassing flush machinery, just like the legacy path did. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04block: pass 'run_queue' to blk_mq_request_bypass_insertMing Lei3-4/+5
Block flush need this function without running the queue, so add a parameter controlling whether we run it or not. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-flush: don't run queue for requests bypassing flushMing Lei1-1/+1
blk_insert_flush() should only insert request since run queue always follows it. In case of bypassing flush, we don't need to run queue because every blk_insert_flush() follows one run queue. Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-mq: put the driver tag of nxt rq before first one is requeuedJianchao Wang1-10/+9
When freeing the driver tag of the next rq with an I/O scheduler configured, we get the first entry of the list. However, this can race with requeue of a request, and we end up getting the wrong request from the head of the list. Free the driver tag of next rq before the failed one is requeued in the failure branch of queue_rq callback. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blkcg: add sanity check for blkcg policy operationsweiping zhang1-0/+5
blkcg policy should keep cpd/pd's alloc_fn and free_fn in pairs, otherwise policy would register fail. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04blk-mq: don't handle failure in .get_budgetMing Lei3-28/+8
It is enough to just check if we can get the budget via .get_budget(). And we don't need to deal with device state change in .get_budget(). For SCSI, one issue to be fixed is that we have to call scsi_mq_uninit_cmd() to free allocated ressources if SCSI device fails to handle the request. And it isn't enough to simply call blk_mq_end_request() to do that if this request is marked as RQF_DONTPREP. Fixes: 0df21c86bdbf(scsi: implement .get_budget and .put_budget for blk-mq) Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-04block: fix peeking requests during PMChristoph Hellwig1-17/+18
We need to look for an active PM request until the next softbarrier instead of looking for the first non-PM request. Otherwise any cause of request reordering might starve the PM request(s). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03blk-mq: Make blk_mq_get_request() error path less confusingBart Van Assche1-5/+7
blk_mq_get_tag() can modify data->ctx. This means that in the error path of blk_mq_get_request() data->ctx should be passed to blk_mq_put_ctx() instead of local_ctx. Note: since blk_mq_put_ctx() ignores its argument, this patch does not change any functionality. References: commit 1ad43c0078b7 ("blk-mq: don't leak preempt counter/q_usage_counter when allocating rq failed") Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03badblocks: fix wrong return value in badblocks_set if badblocks are disabledLiu Bo1-1/+1
MD's rdev_set_badblocks() expects that badblocks_set() returns 1 if badblocks are disabled, otherwise, rdev_set_badblocks() will record superblock changes and return success in that case and md will fail to report an IO error which it should. This bug has existed since badblocks were introduced in commit 9e0e252a048b ("badblocks: Add core badblock management code"). Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Acked-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-03blk-mq: fix nr_requests wrong value when modify it from sysfsweiping zhang1-2/+1
if blk-mq use "none" io scheduler, nr_request get a wrong value when input a number > tag_set->queue_depth. blk_mq_tag_update_depth will get the smaller one min(nr, set->queue_depth), and then q->nr_request get a wrong value. Reproduce: echo none > /sys/block/nvme0n1/queue/scheduler echo 1000000 > /sys/block/nvme0n1/queue/nr_requests cat /sys/block/nvme0n1/queue/nr_requests 1000000 Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03block: add a poll_fn callback to struct request_queueChristoph Hellwig2-9/+16
That we we can also poll non blk-mq queues. Mostly needed for the NVMe multipath code, but could also be useful elsewhere. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03block: introduce GENHD_FL_HIDDENChristoph Hellwig1-18/+50
With this flag a driver can create a gendisk that can be used for I/O submission inside the kernel, but which is not registered as user facing block device. This will be useful for the NVMe multipath implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03block: don't look at the struct device dev_t in disk_devtChristoph Hellwig1-4/+0
The hidden gendisks introduced in the next patch need to keep the dev field in their struct device empty so that udev won't try to create block device nodes for them. To support that rewrite disk_devt to look at the major and first_minor fields in the gendisk itself instead of looking into the struct device. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03block: add a blk_steal_bios helperChristoph Hellwig1-0/+21
This helpers allows to bounce steal the uncompleted bios from a request so that they can be reissued on another path. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03block: provide a direct_make_request helperChristoph Hellwig1-0/+34
This helper allows reinserting a bio into a new queue without much overhead, but requires all queue limits to be the same for the upper and lower queues, and it does not provide any recursion preventions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Javier González <javier@cnexlabs.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-03Merge branch 'nvme-4.15' of git://git.infradead.org/nvme into for-4.15/blockJens Axboe1-6/+5
Pull NVMe changes from Christoph: "Below are the currently queue nvme updates for Linux 4.15. There are a few more things that could make it for this merge window, but I'd like to get things into linux-next, especially for the unlikely case that Linus decided to cut -rc8. Highlights: - support for SGLs in the PCIe driver (Chaitanya Kulkarni) - disable I/O schedulers for the admin queue (Israel Rukshin) - various Fibre Channel fixes and enhancements (James Smart) - various refactoring for better code sharing between transports (Sagi Grimberg and me) as well as lots of little bits from various contributors."
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman43-0/+43
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Privacy Policy