aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/char
AgeCommit message (Collapse)AuthorFilesLines
2011-09-23TPM: Zero buffer after copying to userspacePeter Huewe1-1/+5
Since the buffer might contain security related data it might be a good idea to zero the buffer after we have copied it to userspace. This got assigned CVE-2011-1162. Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: Stable Kernel <stable@kernel.org> Signed-off-by: James Morris <jmorris@namei.org>
2011-09-23TPM: Call tpm_transmit with correct sizePeter Huewe1-0/+3
This patch changes the call of tpm_transmit by supplying the size of the userspace buffer instead of TPM_BUFSIZE. This got assigned CVE-2011-1161. [The first hunk didn't make sense given one could expect way less data than TPM_BUFSIZE, so added tpm_transmit boundary check over bufsiz instead The last parameter of tpm_transmit() reflects the amount of data expected from the device, and not the buffer size being supplied to it. It isn't ideal to parse it directly, so we just set it to the maximum the input buffer can handle and let the userspace API to do such job.] Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Cc: Stable Kernel <stable@kernel.org> Signed-off-by: James Morris <jmorris@namei.org>
2011-09-23TPM: tpm_nsc: Fix a double free of pdev in cleanup_nscAxel Lin1-2/+0
platform_device_unregister() will release all resources and remove it from the subsystem, then drop reference count by calling platform_device_put(). We should not call kfree(pdev) after platform_device_unregister(pdev). Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-09-23TPM: TCG_ATMEL should depend on HAS_IOPORTGeert Uytterhoeven1-0/+1
On m68k, I get: drivers/char/tpm/tpm_atmel.h: In function ‘atmel_get_base_addr’: drivers/char/tpm/tpm_atmel.h:129: error: implicit declaration of function ‘ioport_map’ drivers/char/tpm/tpm_atmel.h:129: warning: return makes pointer from integer without a cast The code in tpm_atmel.h supports PPC64 (using the device tree and ioremap()) and "anything else" (using ioport_map()). However, ioportmap() is only available on platforms that set HAS_IOPORT. Although PC64 seems to have HAS_IOPORT, a "depends on HAS_IOPORT" should work, but I think it's better to expose the special PPC64 handling explicit using "depends on PPC64 || HAS_IOPORT". Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2011-08-25drivers/char/msm_smd_pkt.c: don't use IS_ERR()Thomas Meyer1-3/+2
The various basic memory allocation function return NULL, not an ERR_PTR. The semantic patch that makes this change is available in scripts/coccinelle/null/eno.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Cc: Niranjana Vishwanathapura <nvishwan@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-06net: Compute protocol sequence numbers and fragment IDs using MD5.David S. Miller1-341/+8
Computers have become a lot faster since we compromised on the partial MD4 hash which we use currently for performance reasons. MD5 is a much safer choice, and is inline with both RFC1948 and other ISS generators (OpenBSD, Solaris, etc.) Furthermore, only having 24-bits of the sequence number be truly unpredictable is a very serious limitation. So the periodic regeneration and 8-bit counter have been removed. We compute and use a full 32-bit sequence number. For ipv6, DCCP was found to use a 32-bit truncated initial sequence number (it needs 43-bits) and that is fixed here as well. Reported-by: Dan Kaminsky <dan@doxpara.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-03tpm_tis: fix build when ACPI is not enabledRandy Dunlap1-1/+6
Fix tpm_tis.c build when CONFIG_ACPI is not enabled by providing a stub function. Fixes many build errors/warnings: drivers/char/tpm/tpm_tis.c:89: error: dereferencing pointer to incomplete type drivers/char/tpm/tpm_tis.c:89: warning: type defaults to 'int' in declaration of 'type name' drivers/char/tpm/tpm_tis.c:89: error: request for member 'list' in something not a structure or union ... Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Leendert van Doorn <leendert@watson.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-03ramoops: update module parametersSergiu Iordache1-0/+8
Update the module parameters when platform data is used. This means that they can be read from /sys/module/ramoops/parameters in order to parse the memory area. Signed-off-by: Sergiu Iordache <sergiu@chromium.org> Cc: Marco Stornelli <marco.stornelli@gmail.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds3-0/+494
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile/mm/init.c: trivial: use BUG_ON arch/tile: remove useless set_fixmap_nocache() macro arch/tile: add hypervisor-based character driver for SPI flash ROM ioctl-number.txt: add the tile hardwall ioctl range tile: use generic-y format for one-line asm-generic headers clocksource: tile: convert to use clocksource_register_hz
2011-08-02Merge tag 'v3.0' of ↵Chris Metcalf2-5/+27
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-linus
2011-07-29ramoops: fix compile failure on pariscJames Bottomley1-0/+1
Fixes this: drivers/char/ramoops.c: In function 'ramoops_init': drivers/char/ramoops.c:221: error: implicit declaration of function 'IS_ERR' drivers/char/ramoops.c:222: error: implicit declaration of function 'PTR_ERR' If it actually builds on other platforms, it's probably getting linux/err.h via some other #include. Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-28n2rng: Attach on Niagara-T3.David S. Miller2-13/+18
And stop referring to Victoria Falls, as the attribute we're talking about is whether the rng is multi-unit capable which applies to several chip variants now. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-27Merge branch 'for-linus' of ↵Linus Torvalds4-55/+250
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (54 commits) tpm_nsc: Fix bug when loading multiple TPM drivers tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP block tpm: Fix compilation warning when CONFIG_PNP is not defined TOMOYO: Update kernel-doc. tpm: Fix a typo tpm_tis: Probing function for Intel iTPM bug tpm_tis: Fix the probing for interrupts tpm_tis: Delay ACPI S3 suspend while the TPM is busy tpm_tis: Re-enable interrupts upon (S3) resume tpm: Fix display of data in pubek sysfs entry tpm_tis: Add timeouts sysfs entry tpm: Adjust interface timeouts if they are too small tpm: Use interface timeouts returned from the TPM tpm_tis: Introduce durations sysfs entry tpm: Adjust the durations if they are too small tpm: Use durations returned from TPM TOMOYO: Enable conditional ACL. TOMOYO: Allow using argv[]/envp[] of execve() as conditions. TOMOYO: Allow using executable's realpath and symlink's target as conditions. TOMOYO: Allow using owner/group etc. of file objects as conditions. ... Fix up trivial conflict in security/tomoyo/realpath.c
2011-07-26atomic: use <linux/atomic.h>Arun Sharma2-2/+2
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26ramoops: make record_size a module parameterSergiu Iordache1-10/+27
The size of the dump is currently set using the RECORD_SIZE macro which is set to a page size. This patch makes the record size a module parameter and allows it to be set through platform data as well to allow larger dumps if needed. Signed-off-by: Sergiu Iordache <sergiu@chromium.org> Acked-by: Marco Stornelli <marco.stornelli@gmail.com> Cc: "Ahmed S. Darwish" <darwish.07@gmail.com> Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26ramoops: move dump_oops into platform dataSergiu Iordache1-1/+4
The platform driver currently allows setting the mem_size and mem_address. ince dump_oops is also a module parameter it would be more consistent if it could be set through platform data as well. Signed-off-by: Sergiu Iordache <sergiu@chromium.org> Acked-by: Marco Stornelli <marco.stornelli@gmail.com> Cc: "Ahmed S. Darwish" <darwish.07@gmail.com> Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26ramoops: add new line to each printMarco Stornelli1-6/+9
Add new line to each print. Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Reported-by: Stevie Trujillo <stevie.trujillo@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Américo Wang <xiyou.wangcong@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26ramoops: use module parameters instead of platform data if not availableMarco Stornelli1-12/+35
Use generic module parameters instead of platform data, if platform data are not available. This limitation has been introduced with commit c3b92ce9e75 ("ramoops: use the platform data structure instead of module params"). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Américo Wang <xiyou.wangcong@gmail.com> Reported-by: Stevie Trujillo <stevie.trujillo@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26tpm_nsc: Fix bug when loading multiple TPM driversStefan Berger1-7/+7
This patch fixes kernel bugzilla 34572. https://bugzilla.kernel.org/show_bug.cgi?id=34572 Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Tested-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl> Signed-off-by: James Morris <jmorris@namei.org>
2011-07-25Merge branch 'for-linus' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) fs: Merge split strings treewide: fix potentially dangerous trailing ';' in #defined values/expressions uwb: Fix misspelling of neighbourhood in comment net, netfilter: Remove redundant goto in ebt_ulog_packet trivial: don't touch files that are removed in the staging tree lib/vsprintf: replace link to Draft by final RFC number doc: Kconfig: `to be' -> `be' doc: Kconfig: Typo: square -> squared doc: Konfig: Documentation/power/{pm => apm-acpi}.txt drivers/net: static should be at beginning of declaration drivers/media: static should be at beginning of declaration drivers/i2c: static should be at beginning of declaration XTENSA: static should be at beginning of declaration SH: static should be at beginning of declaration MIPS: static should be at beginning of declaration ARM: static should be at beginning of declaration rcu: treewide: Do not use rcu_read_lock_held when calling rcu_dereference_check Update my e-mail address PCIe ASPM: forcedly -> forcibly gma500: push through device driver tree ... Fix up trivial conflicts: - arch/arm/mach-ep93xx/dma-m2p.c (deleted) - drivers/gpio/gpio-ep93xx.c (renamed and context nearby) - drivers/net/r8169.c (just context changes)
2011-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds6-5/+176
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (34 commits) crypto: caam - ablkcipher support crypto: caam - faster aead implementation crypto: caam - structure renaming crypto: caam - shorter names crypto: talitos - don't bad_key in ablkcipher setkey crypto: talitos - remove unused giv from ablkcipher methods crypto: talitos - don't set done notification in hot path crypto: talitos - ensure request ordering within a single tfm crypto: gf128mul - fix call to memset() crypto: s390 - support hardware accelerated SHA-224 crypto: algif_hash - Handle initial af_alg_make_sg error correctly crypto: sha1_generic - use SHA1_BLOCK_SIZE hwrng: ppc4xx - add support for ppc4xx TRNG crypto: crypto4xx - Perform read/modify/write on device control register crypto: caam - fix build warning when DEBUG_FS not configured crypto: arc4 - Fixed coding style issues crypto: crc32c - Fixed coding style issue crypto: omap-sham - do not schedule tasklet if there is no active requests crypto: omap-sham - clear device flags when finishing request crypto: omap-sham - irq handler must not clear error code ...
2011-07-22Merge branch 'for-linus' of ↵Linus Torvalds3-2/+17
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits) vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp isofs: Remove global fs lock jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory fix IN_DELETE_SELF on overwriting rename() on ramfs et.al. mm/truncate.c: fix build for CONFIG_BLOCK not enabled fs:update the NOTE of the file_operations structure Remove dead code in dget_parent() AFS: Fix silly characters in a comment switch d_add_ci() to d_splice_alias() in "found negative" case as well simplify gfs2_lookup() jfs_lookup(): don't bother with . or .. get rid of useless dget_parent() in btrfs rename() and link() get rid of useless dget_parent() in fs/btrfs/ioctl.c fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers drivers: fix up various ->llseek() implementations fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek Ext4: handle SEEK_HOLE/SEEK_DATA generically Btrfs: implement our own ->llseek fs: add SEEK_HOLE and SEEK_DATA flags reiserfs: make reiserfs default to barrier=flush ... Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new shrinker callout for the inode cache, that clashed with the xfs code to start the periodic workers later.
2011-07-22Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-64, vdso: Do not allocate memory for the vDSO clocksource: Change __ARCH_HAS_CLOCKSOURCE_DATA to a CONFIG option x86, vdso: Drop now wrong comment Document the vDSO and add a reference parser ia64: Replace clocksource.fsys_mmio with generic arch data x86-64: Move vread_tsc and vread_hpet into the vDSO clocksource: Replace vread with generic arch data x86-64: Add --no-undefined to vDSO build x86-64: Allow alternative patching in the vDSO x86: Make alternative instruction pointers relative x86-64: Improve vsyscall emulation CS and RIP handling x86-64: Emulate legacy vsyscalls x86-64: Fill unused parts of the vsyscall page with 0xcc x86-64: Remove vsyscall number 3 (venosys) x86-64: Map the HPET NX x86-64: Remove kernel.vsyscall64 sysctl x86-64: Give vvars their own page x86-64: Document some of entry_64.S x86-64: Fix alignment of jiffies variable
2011-07-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (51 commits) PM: Improve error code of pm_notifier_call_chain() PM: Add "RTC" to PM trace time stamps to avoid confusion PM / Suspend: Export suspend_set_ops, suspend_valid_only_mem PM / Suspend: Add .suspend_again() callback to suspend_ops PM / OPP: Introduce function to free cpufreq table ARM / shmobile: Return -EBUSY from A4LC power off if A3RV is active PM / Domains: Take .power_off() error code into account ARM / shmobile: Use genpd_queue_power_off_work() ARM / shmobile: Use pm_genpd_poweroff_unused() PM / Domains: Introduce function to power off all unused PM domains OMAP: PM: disable idle on suspend for GPIO and UART OMAP: PM: omap_device: add API to disable idle on suspend OMAP: PM: omap_device: add system PM methods for PM domain handling OMAP: PM: omap_device: conditionally use PM domain runtime helpers PM / Runtime: Add new helper function: pm_runtime_status_suspended() PM / Domains: Queue up power off work only if it is not pending PM / Domains: Improve handling of wakeup devices during system suspend PM / Domains: Do not restore all devices on power off error PM / Domains: Allow callbacks to execute all runtime PM helpers PM / Domains: Do not execute device callbacks under locks ...
2011-07-22tpm: Move tpm_tis_reenable_interrupts out of CONFIG_PNP blockStefan Berger1-22/+23
This patch moves the tpm_tis_reenable_interrupts function out of the CONFIG_PNP-surrounded #define block. This solves a compilation error in case CONFIG_PNP is not defined. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Morris <jmorris@namei.org>
2011-07-21ipv6: make fragment identifications less predictableEric Dumazet1-0/+15
IPv6 fragment identification generation is way beyond what we use for IPv4 : It uses a single generator. Its not scalable and allows DOS attacks. Now inetpeer is IPv6 aware, we can use it to provide a more secure and scalable frag ident generator (per destination, instead of system wide) This patch : 1) defines a new secure_ipv6_id() helper 2) extends inet_getid() to provide 32bit results 3) extends ipv6_select_ident() with a new dest parameter Reported-by: Fernando Gont <fernando@gont.com.ar> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-20fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlersJosef Bacik1-2/+7
Btrfs needs to be able to control how filemap_write_and_wait_range() is called in fsync to make it less of a painful operation, so push down taking i_mutex and the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some file systems can drop taking the i_mutex altogether it seems, like ext3 and ocfs2. For correctness sake I just pushed everything down in all cases to make sure that we keep the current behavior the same for everybody, and then each individual fs maintainer can make up their mind about what to do from there. Thanks, Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-20drivers: fix up various ->llseek() implementationsJosef Bacik3-0/+10
Fix up a few ->llseek() implementations that won't deal with SEEK_HOLE/SEEK_DATA properly. Make them future proof so that if we ever add new options they will return -EINVAL. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-21tpm: Fix compilation warning when CONFIG_PNP is not definedStefan Berger1-6/+1
The is_itpm() function is only accessed from a block surrounded by #ifdef CONFIG_PNP. Therefore, also surround it with #ifdef CONFIG_PNP and remove the #else branch causing the warning. http://lxr.linux.no/#linux+v2.6.39/drivers/char/tpm/tpm_tis.c#L622 v2: - fixes a previous typo Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: James Morris <jmorris@namei.org>
2011-07-15PM: Improve error code of pm_notifier_call_chain()Akinobu Mita1-1/+1
This enables pm_notifier_call_chain() to get the actual error code in the callback rather than always assume -EINVAL by converting all PM notifier calls to return encapsulate error code with notifier_from_errno(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-07-14ia64: Replace clocksource.fsys_mmio with generic arch dataAndy Lutomirski1-1/+1
Now that clocksource.archdata is available, use it for ia64-specific code. Cc: Clemens Ladisch <clemens@ladisch.de> Cc: linux-ia64@vger.kernel.org Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andy Lutomirski <luto@mit.edu> Link: http://lkml.kernel.org/r/d31de0ee0842a0e322fb6441571c2b0adb323fa2.1310563276.git.luto@mit.edu Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13agp/intel: Fix typo in G4x_GMCH_SIZE_VT_2MChris Wilson1-3/+4
Konstantin Belousov found an error in the define of G4x_GMCH_SIZE_VT_2M relative to the GMCH specs, and confirmed that indeed one of his users with a Q45 reports 0xb not 0xc for a 2/2MiB GATT. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Konstantin Belousov <kostikbel@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-07-12tpm: Fix a typoStefan Berger1-1/+1
This patch fixes a typo. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm_tis: Probing function for Intel iTPM bugStefan Berger1-4/+73
This patch introduces a function for automatic probing for the Intel iTPM STS_DATA_EXPECT flaw. The patch splits the current tpm_tis_send function into 2 parts where the 1st part is now called tpm_tis_send_data() and merely sends the data to the TPM. This function is then used for probing. The new tpm_tis_send function now first calls tpm_tis_send_data and if that succeeds has the TPM process the command and waits until the response is there. The probing for the Intel iTPM is only invoked if the user has not passed itpm=1 as parameter for the module *or* if such a TPM was detected via ACPI. Previously it was necessary to pass itpm=1 when also passing force=1 to the module when doing a 'modprobe'. This function is more general than the ACPI test function and the function relying on ACPI could probably be removed. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm_tis: Fix the probing for interruptsStefan Berger2-6/+28
This patch fixes several aspects of the probing for interrupts. This patch reads the TPM's timeouts before probing for the interrupts. The tpm_get_timeouts() function is invoked in polling mode and gets the proper timeouts from the TPM so that we don't need to fall back to 2 minutes timeouts for short duration commands while the interrupt probing is happening. This patch introduces a variable probed_irq into the vendor structure that gets the irq number if an interrupt is received while the the tpm_gen_interrupt() function is run in polling mode during interrupt probing. Previously some parts of tpm_gen_interrupt() were run in polling mode, then the irq variable was set in the interrupt handler when an interrupt was received and execution of tpm_gen_interrupt() ended up switching over to interrupt mode. tpm_gen_interrupt() execution ended up on an event queue where it eventually timed out since the probing handler doesn't wake any queues. Before calling into free_irq() clear all interrupt flags that may have been set by the TPM. The reason is that free_irq() will call into the probing interrupt handler and may otherwise fool us into thinking that a real interrupt happened (because we see the flags as being set) while the TPM's interrupt line is not even connected to anything on the motherboard. This solves a problem on one machine I did testing on (Thinkpad T60). If a TPM claims to use a specifc interrupt, the probing is done as well to verify that the interrupt is actually working. If a TPM indicates that it does not use a specific interrupt (returns '0'), probe all interrupts from 3 to 15. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm_tis: Delay ACPI S3 suspend while the TPM is busyStefan Berger1-5/+23
This patch delays the (ACPI S3) suspend while the TPM is busy processing a command and the TPM TIS driver is run in interrupt mode. This is the same behavior as we already have it for the TPM TIS driver in polling mode. Reasoning: Some of the TPM's commands advance the internal state of the TPM. An example would be the extending of one of its PCR registers. Upper layers, such as IMA or TSS (TrouSerS), would certainly want to be sure that the command succeeded rather than getting an error code (-62 = -ETIME) that may not give a conclusive answer as for what reason the command failed. Reissuing such a command would put the TPM into the wrong state, so waiting for it to finish is really the only option. The downside is that some commands (key creation) can take a long time and actually prevent the machine from entering S3 at all before the 20 second timeout of the power management subsystem arrives. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm_tis: Re-enable interrupts upon (S3) resumeStefan Berger1-0/+30
This patch makes sure that if the TPM TIS interface is run in interrupt mode (rather than polling mode) that all interrupts are enabled in the TPM's interrupt enable register after a resume from ACPI S3 suspend. The registers may either have been cleared by the TPM loosing its state during device sleep or by the BIOS leaving the TPM in polling mode (after sending a command to the TPM for starting it up again) You may want to check if your TPM runs with interrupts by doing cat /proc/interrupts | grep -i tpm and see whether there is an entry or otherwise for it to use interrupts: modprobe tpm_tis interrupts=1 [add 'itpm=1' for Intel TPM ] v2: - the patch was adapted to work with the pnp and platform driver implementations in tpm_tis.c Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm: Fix display of data in pubek sysfs entryStefan Berger1-10/+16
This patch fixes the TPM's pubek sysfs entry that is accessible as long as the TPM doesn't have an owner. It was necessary to shift the access to the data by -10 -- the first byte immediately follows the 10 byte header. The line data = tpm_cmd.params.readpubek_out_buffer; sets it at the offset '10' in the packet, so we can read the data array starting at offset '0'. Before: Algorithm: 00 0C 00 00 Encscheme: 08 00 Sigscheme: 00 00 Parameters: 00 00 00 00 01 00 AC E2 5E 3C A0 78 Modulus length: -563306801 Modulus: 28 21 08 0F 82 CD F2 B1 E7 49 F7 74 70 BE 59 8C 43 78 B1 24 EA 52 E2 FE 52 5C 3A 12 3B DC 61 71 [...] After: Algorithm: 00 00 00 01 Encscheme: 00 03 Sigscheme: 00 01 Parameters: 00 00 08 00 00 00 00 02 00 00 00 00 Modulus length: 256 Modulus: AC E2 5E 3C A0 78 DE 6C 9E CF 28 21 08 0F 82 CD F2 B1 E7 49 F7 74 70 BE 59 8C 43 78 B1 24 EA 52 [...] Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm_tis: Add timeouts sysfs entryStefan Berger3-1/+22
Display the TPM's interface timeouts in a 'timeouts' sysfs entry. Display the entries as having been adjusted when they were scaled due to their values being reported in milliseconds rather than microseconds. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm: Adjust interface timeouts if they are too smallStefan Berger1-4/+9
Adjust the interface timeouts if they are found to be too small, i.e., if they are returned in milliseconds rather than microseconds as we heared from Infineon that some (old) Infineon TPMs do. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm: Use interface timeouts returned from the TPMStefan Berger1-3/+4
The TPM driver currently discards the interface timeout values returned from the TPM. The check of the response packet needs to consider that the return_code field is 0 on success and the size of the expected packet is equivalent to the header size + u32 length indicator for the TPM_GetCapability() result + 4 interface timeout indicators of type u32. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm_tis: Introduce durations sysfs entryStefan Berger3-1/+21
Display the TPM's command timeouts in a 'durations' sysfs entry. Display the entries as having been adjusted when they were scaled due to their values being reported in milliseconds rather than microseconds. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm: Adjust the durations if they are too smallStefan Berger1-6/+11
Adjust the durations if they are found to be too small, i.e., if they are returned in milliseconds rather than microseconds as some Infineon TPMs are reported to do. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-12tpm: Use durations returned from TPMStefan Berger1-2/+4
The TPM driver currently discards the durations values returned from the TPM. The check of the response packet needs to consider that the return_code field is 0 on success and the size of the expected packet is equivalent to the header size + u32 length indicator for the TPM_GetCapability() result + 3 timeout indicators of type u32. v4: - sysfs entry 'durations' is now a patch of its own - the work-around for TPMs reporting durations in milliseconds is now in a patch of its own v3: - sysfs entry now called 'durations' to resemble TPM-speak (previously was called 'timeouts') v2: - adjusting all timeouts for TPM devices reporting timeouts in msec rather than usec - also displaying in sysfs whether the timeouts are 'original' or 'adjusted' Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Guillaume Chazarain <guichaz@gmail.com> Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2011-07-11Merge branch 'master' into for-nextJiri Kosina1-2/+23
Sync with Linus' tree to be able to apply pending patches that are based on newer code already present upstream.
2011-07-07Update my e-mail addressMichael Büsch1-1/+1
Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-06-30hwrng: ppc4xx - add support for ppc4xx TRNGJosh Boyer3-0/+169
Various PowerPC 4xx SoCs contain a TRNG embedded in the Security function. This adds a device driver for that TRNG. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30hwrng: timeriomem - use resource_sizeH Hartley Sweeten1-2/+1
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30hwrng: nomadik - add missing clk_putJulia Lawall1-1/+2
Jump to the end of the function for the clk_disable and clk_put rather than returning directly. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2011-06-30hwrng: omap - add missing clk_putJulia Lawall1-2/+4
Convert a return to a jump to an existing label that calls clk_put. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Privacy Policy