aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm
AgeCommit message (Collapse)AuthorFilesLines
2011-10-19drm/radeon/kms/atom: fix handling of FB scratch indicesAlex Deucher2-2/+14
FB scratch indices are dword indices, but we were treating them as byte indices. As such, we were getting the wrong FB scratch data for non-0 indices. Fix the indices and guard the indexing against indices larger than the scratch allocation. Fixes memory corruption on some boards if data was written past the end of the FB scratch array. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Dave Airlie <airlied@redhat.com> Tested-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms/DCE4.1: fix Select_CrtcSource EncodeMode setting for DP ↵Alex Deucher1-1/+11
bridges (v2) Settings in this table reflect the physical panel/connector rather than the internal dig encoding. v2: fix typo for DRM_MODE_CONNECTOR_VGA case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms/DCE4.1: ss is not supported on the internal ppllsAlex Deucher1-1/+1
It's handled via external clock. It should already be protected by the external ss flag, but add an explicit check just in case. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18drm/radeon/kms/DCE4.1: fix dig encoder to transmitter mappingAlex Deucher1-4/+9
llano has fully routeable dig encoders similar to DCE3.2 while ontario has a hardcoded mapping similar to DCE4.0. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-18ttm: Fix error-path using an uninitialized valueThomas Hellstrom1-1/+1
Pointed out by Michel Daenzer. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-06drm/radeon/kms: use hardcoded dig encoder to transmitter mapping for DCE4.1Alex Deucher1-3/+6
The encoders are supposedly fully routeable, but changing the mapping doesn't always seem to take. Using a hardcoded mapping is much more reliable. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41366 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-05drm/radeon/kms: fix dp_detect handling for DP bridge chipsAlex Deucher1-15/+6
The HPD pin is not reliable for detecting whether a monitor is connected or not. Skip HPD and just use DDC or load detection. Fixes phantom VGA connected bugs. [Michel: fixes phantom VGA bugs on his llano system.] Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Tested-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-05drm/radeon/kms: retry aux transactions if there are status flagsAlex Deucher1-3/+9
If there are error flags in the aux status, retry the transaction. This makes aux much more reliable, especially on llano systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-04drm/radeon/kms: fix channel_remap setup (v2)Alex Deucher3-127/+0
Most asics just use the hw default value which requires no explicit programming. For those that need a different value, the vbios will program it properly. As such, there's no need to program these registers explicitly in the driver. Changing MC_SHARED_CHREMAP requires a reload of all data in vram otherwise its contents will be scambled. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=40103 v2: drop now unused channel_remap functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon: Set cursor x/y to 0 when x/yorigin > 0.Michel Dänzer1-10/+10
Apart from the obvious cleanup, this should make the line cursor_end = x - xorigin + w; correct now. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.Michel Dänzer1-5/+7
Fixes cursor disappearing prematurely when moving off a top/left edge which is not located at the desktop top/left edge. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon: Simplify cursor x/yorigin calculation.Michel Dänzer1-6/+2
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon/kms: fix cursor image off-by-one errorNicholas Miell1-2/+2
The mouse cursor hotspot calculation when the cursor is partially off the top or left side of the screen was off by one. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=41158 Signed-off-by: Nicholas Miell <nmiell@gmail.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon/kms: Fix logic error in DP HPD handlerAlex Deucher1-4/+4
Only disable the pipe if the monitor is physically disconnected. The previous logic also disabled the pipe if the link was trained. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41248 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon/kms: add retry limits for native DP aux deferAlex Deucher1-4/+8
The previous code could potentially loop forever. Limit the number of DP aux defer retries to 4 for native aux transactions, same as i2c over aux transactions. Noticed by: Brad Campbell <lists2009@fnarfbargle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <lists2009@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-10-03drm/radeon/kms: fix regression in DP aux defer handlingAlex Deucher1-2/+2
An incorrect ordering in the error checking code lead to DP aux defer being skipped in the aux native write path. Move the bytes transferred check (ret == 0) below the defer check. Tracked down by: Brad Campbell <brad@fnarfbargle.com> Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41121 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Brad Campbell <brad@fnarfbargle.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-29Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linuxLinus Torvalds4-70/+47
* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: drm/i915: FBC off for ironlake and older, otherwise on by default drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI drm/i915: Enable dither whenever display bpc < frame buffer bpc
2011-09-23drm/radeon/kms: fix DDIA enable on some rs690 systemsAlex Deucher1-1/+8
DVOOutputControl checks the value of of bios scratch reg 3 on some tables and assumes the encoder is already enabled if the DFP2_ACTIVE bit is set. Clear that bit so the table sets the DDIA enable bit properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-23Revert "drm/radeon/kms: fix typo in r100_blit_copy"Dave Airlie1-2/+2
This reverts commit 18b4fada275dd2b6dd9db904ddf70fe39e272222. This code was correct, apologies to anyone who noticed things broke. revert contents are different due to another commit in between. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-21drm/i915: FBC off for ironlake and older, otherwise on by defaultKeith Packard2-4/+12
Make the default FBC behaviour chipset specific, allowing us to turn it on by default for Ironlake and older where it has been seen to cause trouble with screen updates. Signed-off-by: Keith Packard <keithp@keithp.com> Tested-by: Francis Moreau <francis.moro@gmail.com>
2011-09-21drm/i915: Enable SDVO hotplug interrupts for HDMI and DVISimon Farnsworth2-62/+29
I was seeing a nasty 5 frame glitch every 10 seconds, caused by the poll for connection on DVI attached by SDVO. As my SDVO DVI supports hotplug detect interrupts, the fix is to enable them, and hook them in to the various bits of driver infrastructure so that they work reliably. Note that this is only tested on single-function DVI-D SDVOs, on two platforms (965GME and 945GSE), and has not been checked against a specification document. With lots of help from Adam Jackson <ajax@redhat.com> on IRC. Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-19drm/i915: Enable dither whenever display bpc < frame buffer bpcKeith Packard1-4/+6
We want to enable dithering on any pipe where the frame buffer has more color resolution than the output device. The previous code was incorrectly clamping the frame buffer bpc to the display bpc, effectively disabling dithering all of the time as the computed frame buffer bpc would never be larger than the display bpc. Signed-off-by: Keith Packard <keithp@keithp.com> Reported-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
2011-09-18drm/radeon/kms: Make GPU/CPU page size handling consistent in blit code (v2)Alex Deucher7-24/+34
The BO blit code inconsistenly handled the page size. This wasn't an issue on system with 4k pages since the GPU's page size is 4k as well. Switch the driver blit callbacks to take num pages in GPU page units. Fixes lemote mipsel systems using AMD rs780/rs880 chipsets. v2: incorporate suggestions from Michel. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-18drm/radeon/kms: fix typo in r100_blit_copyAlex Deucher1-2/+2
cur_pages is the number of pages per loop iteration. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14drm/radeon: Unreference GEM object outside of spinlock in page flip error path.Michel Dänzer1-1/+1
Should fix https://bugzilla.redhat.com/show_bug.cgi?id=726277 . Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14drm/radeon: Don't read from CP ring write pointer registers.Michel Dänzer4-14/+12
Apparently this doesn't always work reliably, e.g. at resume time. Just initialize to 0, so the ring is considered empty. Tested with hibernation on Sumo and Cayman cards. Should fix https://bugs.launchpad.net/ubuntu/+source/linux/+bug/820746/ . Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-14drm/ttm: request zeroed system memory pages for new TT buffer objectsBen Skeggs1-1/+2
Fixes an information leak to userspace, we were handing out un-zeroed pages for any newly created TTM_PL_TT buffer. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Tested-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-09drm: Remove duplicate "return" statementLin Ming1-1/+0
Remove the duplicate "return" statement in drm_fb_helper_panic(). Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-09Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie4-7/+30
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-test * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nv04/crtc: Bail out if FB is not bound to crtc drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate drm/nouveau: fix oops on pre-semaphore hardware drm/nv50/crtc: Bail out if FB is not bound to crtc
2011-09-09drm/nv04/crtc: Bail out if FB is not bound to crtcEmil Velikov1-2/+13
This commit resolves a possible 'NULL pointer dereference' It uses the same approach as radeon, intel and nouveau/nv50 Fixes bug 'Nouveau: Kernel oops when unplugging external monitor' https://bugs.freedesktop.org/show_bug.cgi?id=40336 Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-09drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archsMarcin Slusarz1-1/+1
nv04_sgdma_bind binds the same page multiple times on architectures where PAGE_SIZE != 4096. Let's fix it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-09drm/nouveau: properly handle allocation failure in nouveau_sgdma_populateMarcin Slusarz1-1/+4
Not cleaning after alloc failure would result in crash on destroy, because nouveau_sgdma_clear assumes "ttm_alloced" to be not null when "pages" is not null. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-09drm/nouveau: fix oops on pre-semaphore hardwareBen Skeggs1-1/+2
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-09drm/nv50/crtc: Bail out if FB is not bound to crtcEmil Velikov1-2/+10
Fixes possbile NULL pointer dereference Resolves 'kernel crash in nv50_crtc_do_mode_set_base during shutdown' https://bugs.freedesktop.org/show_bug.cgi?id=40005 Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-09-06drm/radeon/kms: fix DP detect and EDID fetch for DP bridgesAlex Deucher2-20/+36
Sink type is always DP for DP bridges and EDID fetch on DP bridges is always i2c over aux rather than plain i2c. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-09-02drm/radeon/kms: make sure pci max read request size is valid on evergreen+ (v2)Alex Deucher2-0/+30
If the bios or OS sets the pci max read request size to 0 or an invalid value (6,7), it can result in a hang or slowdown. Check and set it to something sane if it's invalid. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=42162 v2: use pci reg defines from include/linux/pci_regs.h Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-31drm/radeon/kms: set a default max_pixel_clockDave Airlie1-0/+3
On some Power rv100 cards, we have no ATY OF table, but we have no combios table either, and hence we refuse all modes on VGA-0 since we end up with a 0 max pixel clock. Signed-off-by: Dave Airlie <airlied@redhat.com> Cc: stable@kernel.org Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com>
2011-08-30drm/radeon/kms: add s/r quirk for Compaq Presario V5245EUAlex Deucher1-0/+8
Fixes resume on Compaq Presario V5245EU. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=41642 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-30drm/radeon/kms: evergreen & ni reset SPI block on CP resumeJerome Glisse2-0/+2
For some reason SPI block is in broken state after module unloading. This lead to broken rendering after reloading module. Fix this by reseting SPI block in CP resume function Signed-off-by: Jerome Glisse <jglisse@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-29drm: Fix the number of connector and encoder to cleanup functionsJoonyoung Shim1-0/+2
It is left out the code to decrease the number of connector and encoder to the cleanup functions. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-26Merge branch 'drm-intel-fixes' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlocked i915: do not setup intel_backlight twice
2011-08-25drm/i915: Fix wrong initializer for "locked" variable in assert_panel_unlockedThomas Jarosch1-1/+1
Otherwise it just contains random memory. Issue detected by cppcheck. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-23drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 ↵Thomas Reim1-0/+10
HDMI-A Connector Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data to i2c bus for a HDMI connector that is not implemented/existent on the notebook's board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook BugLink: http://bugs.launchpad.net/bugs/826677 Signed-off-by: Thomas Reim <reimth@gmail.com> Acked-by: Chris Routh <routhy@gmail.com> Cc: <stable@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: ensure ttm for new node is bound before calling move_notify()Ben Skeggs1-4/+6
This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some paths as nouveau's move_notify() hook requires that the dma addresses be valid at this point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: unbind ttm before destroying node in accel move cleanupBen Skeggs1-1/+1
Nouveau makes the assumption that if a TTM is bound there will be a mm_node around for it and the backwards ordering here resulted in a use-after-free on some eviction paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-23drm/ttm: fix ttm_bo_add_ttm(user) failure pathMarcin Slusarz1-1/+3
ttm_tt_destroy kfrees passed object, so we need to nullify a reference to it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22i915: do not setup intel_backlight twiceKamal Mostafa1-2/+0
The commit "Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support" adds calls to intel_panel_setup_backlight() from intel_{lvds,dp}_init so do not call it again from intel_setup_outputs(). BugLink: http://bugs.launchpad.net/bugs/831542 Signed-off-by: Kamal Mostafa <kamal@canonical.com> ACKed-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-08-22drm/radeon: Make vramlimit parameter actually work.Michel Dänzer1-0/+2
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Explicitly print GTT/VRAM offsets on test failure.Michel Dänzer1-6/+18
Otherwise these would need to be painstakingly calculated looking at the source code. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-08-22drm/radeon: Take IH ring into account for test size calculation.Michel Dänzer1-3/+7
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>

Privacy Policy