aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/macintosh
AgeCommit message (Collapse)AuthorFilesLines
2019-01-04Remove 'type' argument from access_ok() functionLinus Torvalds2-2/+2
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-22macintosh: Use of_node_name_{eq, prefix} for node name comparisonsRob Herring7-32/+30
Convert string compares of DT node names to use of_node_name_{eq,prefix} helpers instead. This removes direct access to the node name pointer. This changes a single case insensitive node name comparison to case sensitive for "ata4". This is the only instance of a case insensitive comparison for all the open coded node name comparisons on powerpc. Searching the commit history, there doesn't appear to be any reason for it to be case insensitive. A couple of open coded iterating thru the child node names are converted to use for_each_child_of_node() instead. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-26macintosh: Use device_type helpers to access the node typeRob Herring5-30/+22
Remove directly accessing device_node.type pointer and use the accessors instead. This will eventually allow removing the type pointer. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-11-26macintosh: windfarm: Another convert to using %pOFn instead of device_node.nameRob Herring1-3/+3
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Convert the open coded iterating thru child nodes to for_each_child_of_node() while we're here. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-31memblock: stop using implicit alignment to SMP_CACHE_BYTESMike Rapoport1-1/+1
When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by: Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport1-2/+1
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: replace free_bootmem{_node} with memblock_freeMike Rapoport1-1/+1
The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: replace alloc_bootmem with memblock_allocMike Rapoport1-1/+1
The alloc_bootmem(size) is a shortcut for allocation of SMP_CACHE_BYTES aligned memory. When the align parameter of memblock_alloc() is 0, the alignment is implicitly set to SMP_CACHE_BYTES and thus alloc_bootmem(size) and memblock_alloc(size, 0) are equivalent. The conversion is done using the following semantic patch: @@ expression size; @@ - alloc_bootmem(size) + memblock_alloc(size, 0) Link: http://lkml.kernel.org/r/1536927045-23536-22-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-18macintosh/windfarm_smu_sat: Fix debug outputBenjamin Herrenschmidt1-18/+7
There's some antiquated debug output that's trying to do a hand-made hexdump and turning into horrible 1-byte-per-line output these days. Use print_hex_dump() instead Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-08macintosh/via-macii, macintosh/adb-iop: Clean up whitespaceFinn Thain2-160/+174
Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-08macintosh/via-macii, macintosh/adb-iop: Modernize printk callsFinn Thain2-2/+2
Add missing severity level to log messages. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-08macintosh/via-macii: Simplify lockingFinn Thain1-8/+18
Modifying the request queue or changing the current state requires mutual exclusion. Use local_irq_disable() consistently for this rather than disabling the ADB interrupt. This simplifies the locking scheme and brings via-macii into line with the other ADB drivers. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-08macintosh/via-macii: Remove BUG_ON assertionsFinn Thain1-42/+7
The BUG_ON assertions I added to the via-macii driver over a decade ago haven't fired AFAIK. Some can never fire (by inspection). One assertion checks for a NULL pointer, but that would merely substitute a BUG crash for an Oops crash. Remove the pointless BUG_ON assertions and replace the others with a WARN_ON and an array bounds check. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-08macintosh/via-macii: Synchronous bus resetFinn Thain1-1/+2
Make the reset operation synchronous, like the other ADB drivers. The reset request is static data but callers may not know that. This way the struct is not in use when the reset method returns. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-08macintosh/adb: Rework printk output againFinn Thain2-35/+26
Avoid the KERN_CONT problem by avoiding message fragments. The problem arises during async ADB bus probing, when ADB messages may get mixed up with other messages. See also, commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines"). Remove a number of printk() continuation lines by logging handler changes in adb_try_handler_change() instead. This patch addresses the problematic use of "\n" at the beginning of pr_cont() messages, which got overlooked in commit f2be6295684b ("macintosh/adb: Properly mark continued kernel messages"). That commit also changed printk(KERN_DEBUG ...) to pr_debug(...), which hinders work on low-level ADB driver bugs. Revert that change. Cc: Andreas Schwab <schwab@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-08macintosh: Use common code to access RTCFinn Thain2-0/+68
Now that the 68k Mac port has adopted the via-pmu driver, the same RTC code can be shared between m68k and powerpc. Replace duplicated code in arch/powerpc and arch/m68k with common RTC accessors for Cuda and PMU. Drop the problematic WARN_ON which was introduced in commit 22db552b50fa ("powerpc/powermac: Fix rtc read/write functions"). Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-10-03macintosh: Convert to using %pOFn instead of device_node.nameRob Herring3-6/+14
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-24macintosh: therm_windtunnel: drop using attach_adapterWolfram Sang1-2/+23
As we now have deferred probing, we can use a custom mechanism and finally get rid of the legacy interface from the i2c core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Disambiguate interrupt statisticsFinn Thain1-8/+12
Some of the event counters are overloaded which makes it very difficult to interpret their values. Counter 0 is supposed to report CB1 interrupts but it can also count PMU_INT_WAITING_CHARGER events. Counter 1 is supposed to report GPIO interrupts but it can also count other events (depending upon the value of the PMU_INT_ADB bit). Disambiguate these statistics with dedicated counters for GPIO and CB1 interrupts. Comments in the MkLinux source code say that the type 0 and type 1 interrupts are model-specific. Label them as "unknown". This change to the contents of /proc/pmu/interrupts is by necessity visible in userland. However, packages which interact with the PMU (that is, pbbuttonsd, pmac-utils and pmud) don't open this file. AFAIK, user software has no need to poll these counters. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Clean up interrupt statisticsFinn Thain1-17/+22
Replace an open-coded ffs() with the function call. Simplify an if-else cascade using a switch statement. Correct a typo and an indentation issue. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Replace via-pmu68k driver with via-pmu driverFinn Thain4-860/+2
Now that the PowerMac via-pmu driver supports m68k PowerBooks, switch over to that driver and remove the via-pmu68k driver. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu68k: Don't load driver on unsupported hardwareFinn Thain1-4/+0
Don't load the via-pmu68k driver on early PowerBooks. The M50753 PMU device found in those models was never supported by this driver. Attempting to load the driver usually causes a boot hang. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Explicitly specify CONFIG_PPC_PMAC dependenciesFinn Thain1-2/+2
At present, CONFIG_ADB_PMU depends on CONFIG_PPC_PMAC. When this gets relaxed to CONFIG_PPC_PMAC || CONFIG_MAC, those Kconfig symbols with implicit deps on PPC_PMAC will need explicit deps. Add them now. No functional change. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Add support for m68k PowerBooksFinn Thain2-12/+91
Put #ifdefs around the Open Firmware, xmon, interrupt dispatch, battery and suspend code. Add the necessary interrupt handling to support m68k PowerBooks. The pmu_kind value is available to userspace using the PMU_IOC_GET_MODEL ioctl. It is not clear yet what hardware classes are be needed to describe m68k PowerBook models, so pmu_kind is given the provisional value PMU_UNKNOWN. To find out about the hardware, user programs can use /proc/bootinfo or /proc/hardware, or send the PMU_GET_VERSION command using /dev/adb. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Replace via pointer with via1 and via2 pointersFinn Thain1-73/+69
On most PowerPC Macs, the PMU driver uses the shift register and IO port B from a single VIA chip. On 68k and early PowerPC PowerBooks, the driver uses the shift register from one VIA chip together with IO port B from another. Replace via with via1 and via2 to accommodate this. For the CONFIG_PPC_PMAC case, set via1 = via2 so there is no change. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Enhance state machine with new 'uninitialized' stateFinn Thain1-22/+22
On 68k Macs, the via/vias pointer can't be used to determine whether the PMU driver has been initialized. For portability, add a new state to indicate that via_find_pmu() succeeded. After via_find_pmu() executes, testing vias == NULL is equivalent to testing via == NULL. Replace these tests with pmu_state == uninitialized which is simpler and more consistent. No functional change. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Don't clear shift register interrupt flag twiceFinn Thain1-1/+0
The shift register interrupt flag gets cleared in via_pmu_interrupt() and once again in pmu_sr_intr(). Fix this theoretical race condition. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Add missing mmio accessorsFinn Thain1-4/+5
Add missing in_8() accessors to init_pmu() and pmu_sr_intr(). This fixes several sparse warnings: drivers/macintosh/via-pmu.c:536:29: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:537:33: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1455:17: warning: dereference of noderef expression drivers/macintosh/via-pmu.c:1456:69: warning: dereference of noderef expression Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-07-31macintosh/via-pmu: Fix section mismatch warningFinn Thain1-1/+1
The pmu_init() function has the __init qualifier, but the ops struct that holds a pointer to it does not. This causes a build warning. The driver works fine because the pointer is only dereferenced early. The function is so small that there's negligible benefit from using the __init qualifier. Remove it to fix the warning, consistent with the other ADB drivers. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-06-07Merge tag 'powerpc-4.18-1' of ↵Linus Torvalds4-12/+12
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for split PMD page table lock on 64-bit Book3S (Power8/9). - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live patching again. - Add support for patching barrier_nospec in copy_from_user() and syscall entry. - A couple of fixes for our data breakpoints on Book3S. - A series from Nick optimising TLB/mm handling with the Radix MMU. - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre. - Several series optimising various parts of the 32-bit code from Christophe Leroy. - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"), which is why the diffstat has so many deletions. And many other small improvements & fixes. There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details around pkey support. It was ack'ed/reviewed by Ingo & Dave and has been in next for several weeks. Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing" * tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits) powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap cpuidle: powernv: Fix promotion from snooze if next state disabled powerpc: fix build failure by disabling attribute-alias warning in pci_32 ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait() powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted" powerpc: fix spelling mistake: "Usupported" -> "Unsupported" powerpc/pkeys: Detach execute_only key on !PROT_EXEC powerpc/powernv: copy/paste - Mask SO bit in CR powerpc: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove support for Marvell mv64x60 i2c controller powerpc/boot: Remove support for Marvell MPSC serial controller powerpc/embedded6xx: Remove C2K board support powerpc/lib: optimise PPC32 memcmp powerpc/lib: optimise 32 bits __clear_user() powerpc/time: inline arch_vtime_task_switch() powerpc/Makefile: set -mcpu=860 flag for the 8xx powerpc: Implement csum_ipv6_magic in assembly powerpc/32: Optimise __csum_partial() powerpc/lib: Adjust .balign inside string functions for PPC32 ...
2018-05-25powerpc/sparse: Fix plain integer as NULL pointer warningMathieu Malaterre1-9/+9
Trivial fix to remove the following sparse warnings: arch/powerpc/kernel/module_32.c:112:74: warning: Using plain integer as NULL pointer arch/powerpc/kernel/module_32.c:117:74: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1155:28: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1230:20: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1385:36: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:1752:23: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2084:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2110:32: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2167:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:2183:19: warning: Using plain integer as NULL pointer drivers/macintosh/via-pmu.c:277:20: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:155:67: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:247:27: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:249:27: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/setup.c:252:37: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:127:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:148:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:44:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:57:21: warning: Using plain integer as NULL pointer arch/powerpc/mm/tlb_hash32.c:87:21: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:160:31: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:167:22: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:274:21: warning: Using plain integer as NULL pointer arch/powerpc/kernel/btext.c:285:31: warning: Using plain integer as NULL pointer arch/powerpc/include/asm/hugetlb.h:204:16: warning: Using plain integer as NULL pointer arch/powerpc/mm/ppc_mmu_32.c:170:21: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/pci.c:1227:23: warning: Using plain integer as NULL pointer arch/powerpc/platforms/powermac/pci.c:65:24: warning: Using plain integer as NULL pointer Also use `--fix` command line option from `script/checkpatch --strict` to remove the following: CHECK: Comparison to NULL could be written "!dispDeviceBase" #72: FILE: arch/powerpc/kernel/btext.c:160: + if (dispDeviceBase == NULL) CHECK: Comparison to NULL could be written "!vbase" #80: FILE: arch/powerpc/kernel/btext.c:167: + if (vbase == NULL) CHECK: Comparison to NULL could be written "!base" #89: FILE: arch/powerpc/kernel/btext.c:274: + if (base == NULL) CHECK: Comparison to NULL could be written "!dispDeviceBase" #98: FILE: arch/powerpc/kernel/btext.c:285: + if (dispDeviceBase == NULL) CHECK: Comparison to NULL could be written "strstr" #117: FILE: arch/powerpc/kernel/module_32.c:117: + if (strstr(secstrings + sechdrs[i].sh_name, ".debug") != NULL) CHECK: Comparison to NULL could be written "!Hash" #130: FILE: arch/powerpc/mm/ppc_mmu_32.c:170: + if (Hash == NULL) CHECK: Comparison to NULL could be written "Hash" #143: FILE: arch/powerpc/mm/tlb_hash32.c:44: + if (Hash != NULL) { CHECK: Comparison to NULL could be written "!Hash" #152: FILE: arch/powerpc/mm/tlb_hash32.c:57: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" #161: FILE: arch/powerpc/mm/tlb_hash32.c:87: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" #170: FILE: arch/powerpc/mm/tlb_hash32.c:127: + if (Hash == NULL) { CHECK: Comparison to NULL could be written "!Hash" #179: FILE: arch/powerpc/mm/tlb_hash32.c:148: + if (Hash == NULL) { ERROR: space required after that ';' (ctx:VxV) #192: FILE: arch/powerpc/platforms/powermac/pci.c:65: + for (; node != NULL;node = node->sibling) { CHECK: Comparison to NULL could be written "node" #192: FILE: arch/powerpc/platforms/powermac/pci.c:65: + for (; node != NULL;node = node->sibling) { CHECK: Comparison to NULL could be written "!region" #201: FILE: arch/powerpc/platforms/powermac/pci.c:1227: + if (region == NULL) CHECK: Comparison to NULL could be written "of_get_property" #214: FILE: arch/powerpc/platforms/powermac/setup.c:155: + if (of_get_property(np, "cache-unified", NULL) != NULL && dc) { CHECK: Comparison to NULL could be written "!np" #223: FILE: arch/powerpc/platforms/powermac/setup.c:247: + if (np == NULL) CHECK: Comparison to NULL could be written "np" #226: FILE: arch/powerpc/platforms/powermac/setup.c:249: + if (np != NULL) { CHECK: Comparison to NULL could be written "l2cr" #230: FILE: arch/powerpc/platforms/powermac/setup.c:252: + if (l2cr != NULL) { CHECK: Comparison to NULL could be written "via" #243: FILE: drivers/macintosh/via-pmu.c:277: + if (via != NULL) CHECK: Comparison to NULL could be written "current_req" #252: FILE: drivers/macintosh/via-pmu.c:1155: + if (current_req != NULL) { CHECK: Comparison to NULL could be written "!req" #261: FILE: drivers/macintosh/via-pmu.c:1230: + if (req == NULL || pmu_state != idle CHECK: Comparison to NULL could be written "!req" #270: FILE: drivers/macintosh/via-pmu.c:1385: + if (req == NULL) { CHECK: Comparison to NULL could be written "!pp" #288: FILE: drivers/macintosh/via-pmu.c:2084: + if (pp == NULL) CHECK: Comparison to NULL could be written "!pp" #297: FILE: drivers/macintosh/via-pmu.c:2110: + if (count < 1 || pp == NULL) CHECK: Comparison to NULL could be written "!pp" #306: FILE: drivers/macintosh/via-pmu.c:2167: + if (pp == NULL) CHECK: Comparison to NULL could be written "pp" #315: FILE: drivers/macintosh/via-pmu.c:2183: + if (pp != NULL) { Link: https://github.com/linuxppc/linux/issues/37 Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig1-47/+10
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-14macintosh/windfarm: fix spelling mistake: "ttarged" -> "ttarget"Colin Ian King3-3/+3
Trivial fix to spelling mistake in debug messages of a structure field name Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-07Merge tag 'powerpc-4.17-1' of ↵Linus Torvalds7-40/+40
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for 4PB user address space on 64-bit, opt-in via mmap(). - Removal of POWER4 support, which was accidentally broken in 2016 and no one noticed, and blocked use of some modern instructions. - Workarounds so that the hypervisor can enable Transactional Memory on Power9. - A series to disable the DAWR (Data Address Watchpoint Register) on Power9. - More information displayed in the meltdown/spectre_v1/v2 sysfs files. - A vpermxor (Power8 Altivec) implementation for the raid6 Q Syndrome. - A big series to make the allocation of our pacas (per cpu area), kernel page tables, and per-cpu stacks NUMA aware when using the Radix MMU on Power9. And as usual many fixes, reworks and cleanups. Thanks to: Aaro Koskinen, Alexandre Belloni, Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Aneesh Kumar K.V, Anshuman Khandual, Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe Lombard, Cyril Bur, Daniel Axtens, Dave Young, Finn Thain, Frederic Barrat, Gustavo Romero, Horia Geantă, Jonathan Neuschäfer, Kees Cook, Larry Finger, Laurent Dufour, Laurent Vivier, Logan Gunthorpe, Madhavan Srinivasan, Mark Greer, Mark Hairgrove, Markus Elfring, Mathieu Malaterre, Matt Brown, Matt Evans, Mauricio Faria de Oliveira, Michael Neuling, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai, Rob Herring, Sam Bobroff, Segher Boessenkool, Simon Guo, Simon Horman, Stewart Smith, Sukadev Bhattiprolu, Suraj Jitindar Singh, Thiago Jung Bauermann, Vaibhav Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wei Yongjun" * tag 'powerpc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (207 commits) powerpc/64s/idle: Fix restore of AMOR on POWER9 after deep sleep powerpc/64s: Fix POWER9 DD2.2 and above in cputable features powerpc/64s: Fix pkey support in dt_cpu_ftrs, add CPU_FTR_PKEY bit powerpc/64s: Fix dt_cpu_ftrs to have restore_cpu clear unwanted LPCR bits Revert "powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead" powerpc: iomap.c: introduce io{read|write}64_{lo_hi|hi_lo} powerpc: io.h: move iomap.h include so that it can use readq/writeq defs cxl: Fix possible deadlock when processing page faults from cxllib powerpc/hw_breakpoint: Only disable hw breakpoint if cpu supports it powerpc/mm/radix: Update command line parsing for disable_radix powerpc/mm/radix: Parse disable_radix commandline correctly. powerpc/mm/hugetlb: initialize the pagetable cache correctly for hugetlb powerpc/mm/radix: Update pte fragment count from 16 to 256 on radix powerpc/mm/keys: Update documentation and remove unnecessary check powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead powerpc/64s/idle: Consolidate power9_offline_stop()/power9_idle_stop() powerpc/powernv: Always stop secondaries before reboot/shutdown powerpc: hard disable irqs in smp_send_stop loop powerpc: use NMI IPI for smp_send_stop powerpc/powernv: Fix SMT4 forcing idle code ...
2018-03-30drivers: macintosh: rack-meter: really fix bogus memsetsAaro Koskinen1-2/+2
We should zero an array using sizeof instead of number of elements. Fixes the following compiler (GCC 7.3.0) warnings: drivers/macintosh/rack-meter.c: In function 'rackmeter_do_pause': drivers/macintosh/rack-meter.c:157:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] drivers/macintosh/rack-meter.c:158:2: warning: 'memset' used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] Fixes: 4f7bef7a9f69 ("drivers: macintosh: rack-meter: fix bogus memsets") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-30macintosh/adb: Use C99 initializers for struct adb_driver instancesFinn Thain5-36/+35
No change to object files. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-20powerpc: Use sizeof(*foo) rather than sizeof(struct foo)Markus Elfring1-1/+1
It's slightly less error prone to use sizeof(*foo) rather than specifying the type. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> [mpe: Consolidate into one patch, rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-19macintosh/via-pmu68k: Initialize PMU driver with setup_arch and arch_initcallFinn Thain1-28/+61
The PMU watchdog will power down the system if the kernel is slow to start up, e.g. due to unpacking a large initrd. The powerpc version of this driver (via-pmu.c) has a solution for the same problem. It uses this call sequence: setup_arch find_via_pmu init_pmu ... arch_initcall via_pmu_start Bring via-pmu68k.c into line with via-pmu.c to fix this issue. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-03-13powerpc/via-pmu: Fix section mismatch warningMathieu Malaterre1-1/+1
Make the struct via_pmu_driver const to avoid following warning: WARNING: vmlinux.o(.data+0x4739c): Section mismatch in reference from the variable via_pmu_driver to the function .init.text:pmu_init() The variable via_pmu_driver references the function __init pmu_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Mathieu Malaterre <malat@debian.org> Suggested-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-03-13macintosh: Add module license to ans-lcdLarry Finger1-0/+1
In kernel 4.15, the modprobe step on my PowerBook G4 started complaining that there was no module license for ans-lcd. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-02-13powerpc/macio: set a proper dma_coherent_maskChristoph Hellwig1-0/+1
We have expected busses to set up a coherent mask to properly use the common dma mapping code for a long time, and now that I've added a warning macio turned out to not set one up yet. This sets it to the same value as the dma_mask, which seems to be what the drivers expect. Reported-by: Mathieu Malaterre <malat@debian.org> Tested-by: Mathieu Malaterre <malat@debian.org> Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2-2/+2
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06Merge tag 'pci-v4.16-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - skip AER driver error recovery callbacks for correctable errors reported via ACPI APEI, as we already do for errors reported via the native path (Tyler Baicar) - fix DPC shared interrupt handling (Alex Williamson) - print full DPC interrupt number (Keith Busch) - enable DPC only if AER is available (Keith Busch) - simplify DPC code (Bjorn Helgaas) - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn Helgaas) - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn Helgaas) - move ASPM internal interfaces out of public header (Bjorn Helgaas) - allow hot-removal of VGA devices (Mika Westerberg) - speed up unplug and shutdown by assuming Thunderbolt controllers don't support Command Completed events (Lukas Wunner) - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling, Jay Cornwall) - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes) - clean up PCI DMA interface usage (Christoph Hellwig) - remove PCI pool API (replaced with DMA pool) (Romain Perier) - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan Kaya) - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring) - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler) - remove warnings on sysfs mmap failure (Bjorn Helgaas) - quiet ROM validation messages (Alex Deucher) - remove redundant memory alloc failure messages (Markus Elfring) - fill in types for compile-time VGA and other I/O port resources (Bjorn Helgaas) - make "pci=pcie_scan_all" work for Root Ports as well as Downstream Ports to help AmigaOne X1000 (Bjorn Helgaas) - add SPDX tags to all PCI files (Bjorn Helgaas) - quirk Marvell 9128 DMA aliases (Alex Williamson) - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas) - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas Cassel) - use DMA API to get MSI address for DesignWare IP (Niklas Cassel) - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I) - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun) - add support for ARTPEC-7 SoC (Niklas Cassel) - add endpoint-mode support for ARTPEC (Niklas Cassel) - add Cadence PCIe host and endpoint controller driver (Cyrille Pitchen) - handle multiple INTx status bits being set in dra7xx (Vignesh R) - translate dra7xx hwirq range to fix INTD handling (Vignesh R) - remove deprecated Exynos PHY initialization code (Jaehoon Chung) - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu) - fix NULL pointer dereference in iProc BCMA driver (Ray Jui) - fix Keystone interrupt-controller-node lookup (Johan Hovold) - constify qcom driver structures (Julia Lawall) - rework Tegra config space mapping to increase space available for endpoints (Vidya Sagar) - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy) - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy) - add support for Global Fabric Manager Server (GFMS) event to Microsemi Switchtec switch driver (Logan Gunthorpe) - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao) * tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller PCI: endpoint: Fix EPF device name to support multi-function devices PCI: endpoint: Add the function number as argument to EPC ops PCI: cadence: Add host driver for Cadence PCIe controller dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller PCI: Add vendor ID for Cadence PCI: Add generic function to probe PCI host controllers PCI: generic: fix missing call of pci_free_resource_list() PCI: OF: Add generic function to parse and allocate PCI resources PCI: Regroup all PCI related entries into drivers/pci/Makefile PCI/DPC: Reformat DPC register definitions PCI/DPC: Add and use DPC Status register field definitions PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error() PCI/DPC: Remove unnecessary RP PIO register structs PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info() PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info() PCI/DPC: Make RP PIO log size check more generic PCI/DPC: Rename local "status" to "dpc_status" PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error() ...
2018-02-02Merge tag 'powerpc-4.16-1' of ↵Linus Torvalds11-58/+58
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Enable support for memory protection keys aka "pkeys" on Power7/8/9 when using the hash table MMU. - Extend our interrupt soft masking to support masking PMU interrupts as well as "normal" interrupts, and then use that to implement local_t for a ~4x speedup vs the current atomics-based implementation. - A new driver "ocxl" for "Open Coherent Accelerator Processor Interface (OpenCAPI)" devices. - Support for new device tree properties on PowerVM to describe hotpluggable memory and devices. - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit VDSO. - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI erratum workaround, plus a minor cleanup patch. As well as quite a lot of other changes all over the place, and small fixes and cleanups as always. Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy, Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann, Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G. Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur, David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva, Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud, Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee, Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann, Vaibhav Jain, Vasyl Gomonovych" * tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits) powerpc/mm/radix: Fix build error when RADIX_MMU=n macintosh/ams-input: Use true and false for boolean values macintosh: change some data types from int to bool powerpc/watchdog: Print the NIP in soft_nmi_interrupt() powerpc/watchdog: regs can't be null in soft_nmi_interrupt() powerpc/watchdog: Tweak watchdog printks powerpc/cell: Remove axonram driver rtc-opal: Fix handling of firmware error codes, prevent busy loops powerpc/mpc52xx_gpt: make use of raw_spinlock variants macintosh/adb: Properly mark continued kernel messages powerpc/pseries: Fix cpu hotplug crash with memoryless nodes powerpc/numa: Ensure nodes initialized for hotplug powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes powerpc/kernel: Block interrupts when updating TIDR powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn powerpc/mm/nohash: do not flush the entire mm when range is a single page powerpc/pseries: Add Initialization of VF Bars powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV powerpc/eeh: Add EEH notify resume sysfs powerpc/eeh: Add EEH operations to notify resume ...
2018-01-28macintosh/ams-input: Use true and false for boolean valuesGustavo A. R. Silva1-2/+2
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Michael Hanselmann <public@hansmi.ch> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-28macintosh: change some data types from int to boolGustavo A. R. Silva7-14/+17
Change the data type of the following variables from int to bool across all macintosh drivers: started slots_started pm121_started wf_smu_started Some of these issues were detected with the help of Coccinelle. Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-27macintosh/adb: Properly mark continued kernel messagesAndreas Schwab2-41/+38
Use pr_cont where appropriate, and switch to pr_foo throughout. Additionally, lower messages in adb_probe_task to debug level. Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> [mpe: Clean up whitespace slightly] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-21backlight: Fix old-style function definitionMathieu Malaterre1-1/+1
Fix warning: drivers/macintosh/via-pmu-backlight.c: In function ‘pmu_backlight_init’: drivers/macintosh/via-pmu-backlight.c:140:13: warning: old-style function definition [-Wold-style-definition] void __init pmu_backlight_init() ^~~~~~~~~~~~~~~~~~ Signed-off-by: Mathieu Malaterre <malat@debian.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-01-17powerpc/via-pmu: Deprecate pci_get_bus_and_slot()Sinan Kaya1-1/+1
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Getting ready to remove pci_get_bus_and_slot() function in favor of pci_get_domain_bus_and_slot(). Hard-code the domain number as 0 to match the previous behavior. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro2-4/+4
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Privacy Policy