aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-05-22 15:44:50 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-05-22 15:44:50 -0700
commit0b6280c62026168f79ff4dd1437df131bdfd24f2 (patch)
treeddbdbec7a8e0c31e8670a3f6368340f582059654 /drivers
parent1c8df7bd48347a707b437cfd0dad6b08a3b89ab6 (diff)
parent93a33a584e2a49a217118148125944fd02d47b54 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) Don't leak ipvs->sysctl_tbl, from Tommi Rentala. 2) Fix neighbour table entry leak in rocker driver, from Ying Xue. 3) Do not emit bonding notifications for unregistered interfaces, from Nicolas Dichtel. 4) Set ipv6 flow label properly when in TIME_WAIT state, from Florent Fourcot. 5) Fix regression in ipv6 multicast filter test, from Henning Rogge. 6) do_replace() in various footables netfilter modules is missing a check for 0 counters in the datastructure provided by the user. Fix from Dave Jones, and found with trinity. 7) Fix RCU bug in packet scheduler classifier module unloads, from Daniel Borkmann. 8) Avoid deadlock in tcp_get_info() by using u64_sync. From Eric Dumzaet. 9) Input packet processing can race with inetdev_destroy() teardown, fix potential OOPS in ip_error() by explicitly testing whether the inetdev is still attached. From Eric W Biederman. 10) MLDv2 parser in bridge multicast code breaks too early while parsing. Fix from Thadeu Lima de Souza Cascardo. 11) Asking for settings on non-zero PHYID doesn't work because we do not import the command structure from the user and use the PHYID provided there. Fix from Arun Parameswaran. 12) Fix UDP checksums with IPV6 RAW sockets, from Vlad Yasevich. 13) Missing NF_TABLES depends for TPROXY etc can cause build failures, fix from Florian Westphal. 14) Fix netfilter conntrack to handle RFC5961 challenge ACKs properly, from Jesper Dangaard Brouer. 15) If netlink autobind retry fails, we have to reset the sockets portid back to zero. From Herbert Xu. 16) VXLAN netns exit code unregisters using wrong device, from John W Linville. 17) Add some USB device IDs to ath3k and btusb bluetooth drivers, from Dmitry Tunin and Wen-chien Jesse Sung. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) bridge: fix lockdep splat net: core: 'ethtool' issue with querying phy settings bridge: fix parsing of MLDv2 reports ARM: zynq: DT: Use the zynq binding with macb net: macb: Disable half duplex gigabit on Zynq net: macb: Document zynq gem dt binding ipv4: fill in table id when replacing a route cdc_ncm: Fix tx_bytes statistics ipv4: Avoid crashing in ip_error tcp: fix a potential deadlock in tcp_get_info() net: sched: fix call_rcu() race on classifier module unloads net: phy: Make sure phy_start() always re-enables the phy interrupts ipv6: fix ECMP route replacement ipv6: do not delete previously existing ECMP routes if add fails Revert "netfilter: bridge: query conntrack about skb dnat" netfilter: ensure number of counters is >0 in do_replace() netfilter: nfnetlink_{log,queue}: Register pernet in first place tcp: don't over-send F-RTO probes tcp: only undo on partial ACKs in CA_Loss net/ipv6/udp: Fix ipv6 multicast socket filter regression ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/bluetooth/ath3k.c4
-rw-r--r--drivers/bluetooth/btusb.c3
-rw-r--r--drivers/net/bonding/bond_options.c2
-rw-r--r--drivers/net/ethernet/cadence/macb.c18
-rw-r--r--drivers/net/ethernet/cadence/macb.h1
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/resource_tracker.c8
-rw-r--r--drivers/net/ethernet/rocker/rocker.c8
-rw-r--r--drivers/net/phy/phy.c34
-rw-r--r--drivers/net/usb/cdc_ncm.c2
-rw-r--r--drivers/net/vxlan.c2
10 files changed, 57 insertions, 25 deletions
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 288547a3c566..8c81af6dbe06 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -88,6 +88,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x04CA, 0x3007) },
{ USB_DEVICE(0x04CA, 0x3008) },
{ USB_DEVICE(0x04CA, 0x300b) },
+ { USB_DEVICE(0x04CA, 0x300f) },
{ USB_DEVICE(0x04CA, 0x3010) },
{ USB_DEVICE(0x0930, 0x0219) },
{ USB_DEVICE(0x0930, 0x0220) },
@@ -104,6 +105,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0cf3, 0xe003) },
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0CF3, 0xE005) },
+ { USB_DEVICE(0x0CF3, 0xE006) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x13d3, 0x3393) },
@@ -143,6 +145,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
@@ -158,6 +161,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d21f3b4176d3..3c10d4dfe9a7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -186,6 +186,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
@@ -202,6 +203,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
@@ -218,6 +220,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
/* QCA ROME chipset */
+ { USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index 4df28943d222..e8d3c1d35453 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -624,7 +624,7 @@ int __bond_opt_set(struct bonding *bond,
out:
if (ret)
bond_opt_error_interpret(bond, opt, ret, val);
- else
+ else if (bond->dev->reg_state == NETREG_REGISTERED)
call_netdevice_notifiers(NETDEV_CHANGEINFODATA, bond->dev);
return ret;
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 61aa570aad9a..fc646a41d548 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -350,6 +350,9 @@ static int macb_mii_probe(struct net_device *dev)
else
phydev->supported &= PHY_BASIC_FEATURES;
+ if (bp->caps & MACB_CAPS_NO_GIGABIT_HALF)
+ phydev->supported &= ~SUPPORTED_1000baseT_Half;
+
phydev->advertising = phydev->supported;
bp->link = 0;
@@ -1037,6 +1040,12 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
* add that if/when we get our hands on a full-blown MII PHY.
*/
+ /* There is a hardware issue under heavy load where DMA can
+ * stop, this causes endless "used buffer descriptor read"
+ * interrupts but it can be cleared by re-enabling RX. See
+ * the at91 manual, section 41.3.1 or the Zynq manual
+ * section 16.7.4 for details.
+ */
if (status & MACB_BIT(RXUBR)) {
ctrl = macb_readl(bp, NCR);
macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE));
@@ -2693,6 +2702,14 @@ static const struct macb_config emac_config = {
.init = at91ether_init,
};
+static const struct macb_config zynq_config = {
+ .caps = MACB_CAPS_SG_DISABLED | MACB_CAPS_GIGABIT_MODE_AVAILABLE |
+ MACB_CAPS_NO_GIGABIT_HALF,
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
+};
+
static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "cdns,at32ap7000-macb" },
{ .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
@@ -2703,6 +2720,7 @@ static const struct of_device_id macb_dt_ids[] = {
{ .compatible = "atmel,sama5d4-gem", .data = &sama5d4_config },
{ .compatible = "cdns,at91rm9200-emac", .data = &emac_config },
{ .compatible = "cdns,emac", .data = &emac_config },
+ { .compatible = "cdns,zynq-gem", .data = &zynq_config },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, macb_dt_ids);
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index eb7d76f7bf6a..24b1d9bcd865 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -393,6 +393,7 @@
#define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x00000001
#define MACB_CAPS_USRIO_HAS_CLKEN 0x00000002
#define MACB_CAPS_USRIO_DEFAULT_IS_MII 0x00000004
+#define MACB_CAPS_NO_GIGABIT_HALF 0x00000008
#define MACB_CAPS_FIFO_MODE 0x10000000
#define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000
#define MACB_CAPS_SG_DISABLED 0x40000000
diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
index 92fce1b98558..bafe2180cf0c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
+++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c
@@ -3187,7 +3187,7 @@ int mlx4_SW2HW_CQ_wrapper(struct mlx4_dev *dev, int slave,
int cqn = vhcr->in_modifier;
struct mlx4_cq_context *cqc = inbox->buf;
int mtt_base = cq_get_mtt_addr(cqc) / dev->caps.mtt_entry_sz;
- struct res_cq *cq;
+ struct res_cq *cq = NULL;
struct res_mtt *mtt;
err = cq_res_start_move_to(dev, slave, cqn, RES_CQ_HW, &cq);
@@ -3223,7 +3223,7 @@ int mlx4_HW2SW_CQ_wrapper(struct mlx4_dev *dev, int slave,
{
int err;
int cqn = vhcr->in_modifier;
- struct res_cq *cq;
+ struct res_cq *cq = NULL;
err = cq_res_start_move_to(dev, slave, cqn, RES_CQ_ALLOCATED, &cq);
if (err)
@@ -3362,7 +3362,7 @@ int mlx4_SW2HW_SRQ_wrapper(struct mlx4_dev *dev, int slave,
int err;
int srqn = vhcr->in_modifier;
struct res_mtt *mtt;
- struct res_srq *srq;
+ struct res_srq *srq = NULL;
struct mlx4_srq_context *srqc = inbox->buf;
int mtt_base = srq_get_mtt_addr(srqc) / dev->caps.mtt_entry_sz;
@@ -3406,7 +3406,7 @@ int mlx4_HW2SW_SRQ_wrapper(struct mlx4_dev *dev, int slave,
{
int err;
int srqn = vhcr->in_modifier;
- struct res_srq *srq;
+ struct res_srq *srq = NULL;
err = srq_res_start_move_to(dev, slave, srqn, RES_SRQ_ALLOCATED, &srq);
if (err)
diff --git a/drivers/net/ethernet/rocker/rocker.c b/drivers/net/ethernet/rocker/rocker.c
index ec251531bd9f..cf98cc9bbc8d 100644
--- a/drivers/net/ethernet/rocker/rocker.c
+++ b/drivers/net/ethernet/rocker/rocker.c
@@ -2921,10 +2921,11 @@ static int rocker_port_ipv4_resolve(struct rocker_port *rocker_port,
struct neighbour *n = __ipv4_neigh_lookup(dev, (__force u32)ip_addr);
int err = 0;
- if (!n)
+ if (!n) {
n = neigh_create(&arp_tbl, &ip_addr, dev);
- if (!n)
- return -ENOMEM;
+ if (IS_ERR(n))
+ return IS_ERR(n);
+ }
/* If the neigh is already resolved, then go ahead and
* install the entry, otherwise start the ARP process to
@@ -2936,6 +2937,7 @@ static int rocker_port_ipv4_resolve(struct rocker_port *rocker_port,
else
neigh_event_send(n, NULL);
+ neigh_release(n);
return err;
}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 52cd8db2c57d..47cd578052fc 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -742,6 +742,9 @@ EXPORT_SYMBOL(phy_stop);
*/
void phy_start(struct phy_device *phydev)
{
+ bool do_resume = false;
+ int err = 0;
+
mutex_lock(&phydev->lock);
switch (phydev->state) {
@@ -752,11 +755,22 @@ void phy_start(struct phy_device *phydev)
phydev->state = PHY_UP;
break;
case PHY_HALTED:
+ /* make sure interrupts are re-enabled for the PHY */
+ err = phy_enable_interrupts(phydev);
+ if (err < 0)
+ break;
+
phydev->state = PHY_RESUMING;
+ do_resume = true;
+ break;
default:
break;
}
mutex_unlock(&phydev->lock);
+
+ /* if phy was suspended, bring the physical link up again */
+ if (do_resume)
+ phy_resume(phydev);
}
EXPORT_SYMBOL(phy_start);
@@ -769,7 +783,7 @@ void phy_state_machine(struct work_struct *work)
struct delayed_work *dwork = to_delayed_work(work);
struct phy_device *phydev =
container_of(dwork, struct phy_device, state_queue);
- bool needs_aneg = false, do_suspend = false, do_resume = false;
+ bool needs_aneg = false, do_suspend = false;
int err = 0;
mutex_lock(&phydev->lock);
@@ -888,14 +902,6 @@ void phy_state_machine(struct work_struct *work)
}
break;
case PHY_RESUMING:
- err = phy_clear_interrupt(phydev);
- if (err)
- break;
-
- err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
- if (err)
- break;
-
if (AUTONEG_ENABLE == phydev->autoneg) {
err = phy_aneg_done(phydev);
if (err < 0)
@@ -933,7 +939,6 @@ void phy_state_machine(struct work_struct *work)
}
phydev->adjust_link(phydev->attached_dev);
}
- do_resume = true;
break;
}
@@ -943,8 +948,6 @@ void phy_state_machine(struct work_struct *work)
err = phy_start_aneg(phydev);
else if (do_suspend)
phy_suspend(phydev);
- else if (do_resume)
- phy_resume(phydev);
if (err < 0)
phy_error(phydev);
@@ -1053,13 +1056,14 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
{
/* According to 802.3az,the EEE is supported only in full duplex-mode.
* Also EEE feature is active when core is operating with MII, GMII
- * or RGMII. Internal PHYs are also allowed to proceed and should
- * return an error if they do not support EEE.
+ * or RGMII (all kinds). Internal PHYs are also allowed to proceed and
+ * should return an error if they do not support EEE.
*/
if ((phydev->duplex == DUPLEX_FULL) &&
((phydev->interface == PHY_INTERFACE_MODE_MII) ||
(phydev->interface == PHY_INTERFACE_MODE_GMII) ||
- (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
+ phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID) ||
phy_is_internal(phydev))) {
int eee_lp, eee_cap, eee_adv;
u32 lp, cap, adv;
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index c3e4da9e79ca..8067b8fbb0ee 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -1182,7 +1182,7 @@ cdc_ncm_fill_tx_frame(struct usbnet *dev, struct sk_buff *skb, __le32 sign)
* payload data instead.
*/
usbnet_set_skb_tx_stats(skb_out, n,
- ctx->tx_curr_frame_payload - skb_out->len);
+ (long)ctx->tx_curr_frame_payload - skb_out->len);
return skb_out;
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index 27a5f954f8e9..21a0fbf1ed94 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -2961,7 +2961,7 @@ static void __net_exit vxlan_exit_net(struct net *net)
* to the list by the previous loop.
*/
if (!net_eq(dev_net(vxlan->dev), net))
- unregister_netdevice_queue(dev, &list);
+ unregister_netdevice_queue(vxlan->dev, &list);
}
unregister_netdevice_many(&list);

Privacy Policy