aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--CREDITS7
-rw-r--r--Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio8
-rw-r--r--Documentation/ABI/testing/sysfs-class-net19
-rw-r--r--Documentation/ABI/testing/sysfs-class-net-janz-ican319
-rw-r--r--Documentation/IPMI.txt5
-rw-r--r--Documentation/acpi/enumeration.txt2
-rw-r--r--Documentation/acpi/gpio-properties.txt6
-rw-r--r--Documentation/devicetree/bindings/arm/omap/l3-noc.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/silabs,si5351.txt4
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt2
-rw-r--r--Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt (renamed from Documentation/devicetree/bindings/mtd/m25p80.txt)6
-rw-r--r--Documentation/devicetree/bindings/net/amd-xgbe-phy.txt48
-rw-r--r--Documentation/devicetree/bindings/net/amd-xgbe.txt40
-rw-r--r--Documentation/devicetree/bindings/net/cdns-emac.txt3
-rw-r--r--Documentation/devicetree/bindings/net/macb.txt1
-rw-r--r--Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt20
-rw-r--r--Documentation/devicetree/bindings/net/phy.txt3
-rw-r--r--Documentation/devicetree/bindings/rtc/abracon,abx80x.txt30
-rw-r--r--Documentation/kasan.txt8
-rw-r--r--Documentation/kernel-parameters.txt2
-rw-r--r--Documentation/module-signing.txt6
-rw-r--r--Documentation/networking/bonding.txt84
-rw-r--r--Documentation/networking/can.txt3
-rw-r--r--Documentation/networking/dctcp.txt1
-rw-r--r--Documentation/networking/ip-sysctl.txt17
-rw-r--r--Documentation/networking/pktgen.txt150
-rw-r--r--Documentation/networking/switchdev.txt417
-rw-r--r--Documentation/networking/tc-actions-env-rules.txt6
-rw-r--r--Documentation/powerpc/transactional_memory.txt32
-rw-r--r--Documentation/s390/qeth.txt4
-rw-r--r--Documentation/serial/tty.txt3
-rw-r--r--Documentation/virtual/kvm/mmu.txt18
-rw-r--r--MAINTAINERS85
-rw-r--r--Makefile2
-rw-r--r--arch/arc/Kconfig.debug13
-rw-r--r--arch/arc/include/asm/atomic.h2
-rw-r--r--arch/arc/mm/cache_arc700.c4
-rw-r--r--arch/arm/boot/dts/am437x-sk-evm.dts4
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15.dts11
-rw-r--r--arch/arm/boot/dts/armada-375.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-38x.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-39x.dtsi2
-rw-r--r--arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts4
-rw-r--r--arch/arm/boot/dts/dove-cubox.dts1
-rw-r--r--arch/arm/boot/dts/dra7.dtsi10
-rw-r--r--arch/arm/boot/dts/exynos4412-odroid-common.dtsi3
-rw-r--r--arch/arm/boot/dts/exynos5250-snow.dts1
-rw-r--r--arch/arm/boot/dts/exynos5420-peach-pit.dts1
-rw-r--r--arch/arm/boot/dts/exynos5420-trip-points.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5420.dtsi1
-rw-r--r--arch/arm/boot/dts/exynos5440-trip-points.dtsi2
-rw-r--r--arch/arm/boot/dts/exynos5800-peach-pi.dts1
-rw-r--r--arch/arm/boot/dts/imx23-olinuxino.dts4
-rw-r--r--arch/arm/boot/dts/imx25.dtsi1
-rw-r--r--arch/arm/boot/dts/imx28.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabreauto.dtsi1
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts4
-rw-r--r--arch/arm/boot/dts/omap3.dtsi2
-rw-r--r--arch/arm/boot/dts/omap5.dtsi2
-rw-r--r--arch/arm/boot/dts/r8a7791-koelsch.dts2
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi17
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi15
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts13
-rw-r--r--arch/arm/boot/dts/tegra124.dtsi8
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts1
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca9.dts11
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi4
-rw-r--r--arch/arm/configs/multi_v7_defconfig3
-rw-r--r--arch/arm/configs/omap2plus_defconfig2
-rw-r--r--arch/arm/include/asm/dma-iommu.h2
-rw-r--r--arch/arm/include/asm/xen/page.h1
-rw-r--r--arch/arm/kernel/perf_event_cpu.c9
-rw-r--r--arch/arm/mach-exynos/common.h2
-rw-r--r--arch/arm/mach-exynos/exynos.c27
-rw-r--r--arch/arm/mach-exynos/platsmp.c39
-rw-r--r--arch/arm/mach-exynos/pm_domains.c4
-rw-r--r--arch/arm/mach-exynos/suspend.c7
-rw-r--r--arch/arm/mach-gemini/common.h4
-rw-r--r--arch/arm/mach-gemini/reset.c4
-rw-r--r--arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c2
-rw-r--r--arch/arm/mach-omap2/omap_hwmod.c68
-rw-r--r--arch/arm/mach-omap2/omap_hwmod_43xx_data.c70
-rw-r--r--arch/arm/mach-omap2/prcm43xx.h3
-rw-r--r--arch/arm/mach-omap2/prm-regbits-34xx.h1
-rw-r--r--arch/arm/mach-omap2/prm-regbits-44xx.h1
-rw-r--r--arch/arm/mach-omap2/prminst44xx.c20
-rw-r--r--arch/arm/mach-omap2/timer.c13
-rw-r--r--arch/arm/mach-omap2/vc.c12
-rw-r--r--arch/arm/mach-omap2/vc.h2
-rw-r--r--arch/arm/mach-omap2/vc3xxx_data.c1
-rw-r--r--arch/arm/mach-omap2/vc44xx_data.c1
-rw-r--r--arch/arm/mach-pxa/Kconfig9
-rw-r--r--arch/arm/mach-pxa/Makefile1
-rw-r--r--arch/arm/mach-pxa/include/mach/lubbock.h7
-rw-r--r--arch/arm/mach-pxa/include/mach/mainstone.h6
-rw-r--r--arch/arm/mach-pxa/lubbock.c108
-rw-r--r--arch/arm/mach-pxa/mainstone.c115
-rw-r--r--arch/arm/mach-pxa/pxa_cplds_irqs.c200
-rw-r--r--arch/arm/mach-rockchip/pm.c7
-rw-r--r--arch/arm/mach-rockchip/pm.h4
-rw-r--r--arch/arm/mach-rockchip/rockchip.c19
-rw-r--r--arch/arm/mm/dma-mapping.c13
-rw-r--r--arch/arm/mm/proc-arm1020.S2
-rw-r--r--arch/arm/mm/proc-arm1020e.S2
-rw-r--r--arch/arm/mm/proc-arm925.S3
-rw-r--r--arch/arm/mm/proc-feroceon.S1
-rw-r--r--arch/arm/net/bpf_jit_32.c52
-rw-r--r--arch/arm/xen/enlighten.c1
-rw-r--r--arch/arm/xen/mm.c15
-rw-r--r--arch/arm64/Kconfig1
-rw-r--r--arch/arm64/boot/dts/arm/juno-motherboard.dtsi31
-rw-r--r--arch/arm64/crypto/crc32-arm64.c22
-rw-r--r--arch/arm64/crypto/sha1-ce-glue.c3
-rw-r--r--arch/arm64/crypto/sha2-ce-glue.c3
-rw-r--r--arch/arm64/include/asm/barrier.h16
-rw-r--r--arch/arm64/kernel/alternative.c53
-rw-r--r--arch/arm64/kernel/perf_event.c9
-rw-r--r--arch/arm64/mm/dma-mapping.c9
-rw-r--r--arch/arm64/mm/dump.c2
-rw-r--r--arch/arm64/net/bpf_jit_comp.c2
-rw-r--r--arch/m32r/kernel/smp.c6
-rw-r--r--arch/mips/Makefile2
-rw-r--r--arch/mips/include/asm/elf.h4
-rw-r--r--arch/mips/include/asm/smp.h2
-rw-r--r--arch/mips/kernel/elf.c32
-rw-r--r--arch/mips/kernel/ptrace.c2
-rw-r--r--arch/mips/kernel/smp-cps.c2
-rw-r--r--arch/mips/kernel/smp.c6
-rw-r--r--arch/mips/kernel/traps.c1
-rw-r--r--arch/mips/kvm/emulate.c6
-rw-r--r--arch/mips/math-emu/cp1emu.c4
-rw-r--r--arch/mips/mm/tlb-r4k.c2
-rw-r--r--arch/mips/sgi-ip32/ip32-platform.c4
-rw-r--r--arch/parisc/include/asm/elf.h4
-rw-r--r--arch/parisc/kernel/process.c10
-rw-r--r--arch/parisc/kernel/sys_parisc.c3
-rw-r--r--arch/powerpc/include/uapi/asm/tm.h2
-rw-r--r--arch/powerpc/kernel/eeh.c11
-rw-r--r--arch/powerpc/kernel/entry_64.S19
-rw-r--r--arch/powerpc/kernel/idle_power7.S2
-rw-r--r--arch/powerpc/kernel/mce.c4
-rw-r--r--arch/powerpc/kernel/vmlinux.lds.S1
-rw-r--r--arch/powerpc/kvm/book3s_hv.c5
-rw-r--r--arch/powerpc/kvm/book3s_xics.c2
-rw-r--r--arch/powerpc/mm/hugetlbpage.c25
-rw-r--r--arch/powerpc/mm/pgtable_64.c11
-rw-r--r--arch/powerpc/platforms/powernv/pci-ioda.c2
-rw-r--r--arch/powerpc/platforms/pseries/dlpar.c10
-rw-r--r--arch/s390/Kconfig2
-rw-r--r--arch/s390/crypto/crypt_s390.h122
-rw-r--r--arch/s390/crypto/ghash_s390.c25
-rw-r--r--arch/s390/crypto/prng.c850
-rw-r--r--arch/s390/include/asm/kexec.h3
-rw-r--r--arch/s390/include/asm/mmu.h4
-rw-r--r--arch/s390/include/asm/mmu_context.h3
-rw-r--r--arch/s390/include/asm/pgalloc.h1
-rw-r--r--arch/s390/include/asm/pgtable.h169
-rw-r--r--arch/s390/mm/hugetlbpage.c66
-rw-r--r--arch/s390/mm/pgtable.c142
-rw-r--r--arch/s390/net/bpf_jit_comp.c19
-rw-r--r--arch/tile/kernel/setup.c2
-rw-r--r--arch/x86/boot/compressed/eboot.c2
-rw-r--r--arch/x86/include/asm/hypervisor.h2
-rw-r--r--arch/x86/include/asm/kvm_host.h3
-rw-r--r--arch/x86/include/asm/pvclock.h1
-rw-r--r--arch/x86/include/asm/spinlock.h2
-rw-r--r--arch/x86/include/asm/xen/page.h5
-rw-r--r--arch/x86/kernel/cpu/hypervisor.c4
-rw-r--r--arch/x86/kernel/cpu/perf_event_intel.c73
-rw-r--r--arch/x86/kernel/cpu/perf_event_intel_rapl.c1
-rw-r--r--arch/x86/kernel/cpu/perf_event_intel_uncore_snb.c12
-rw-r--r--arch/x86/kernel/process.c14
-rw-r--r--arch/x86/kernel/pvclock.c44
-rw-r--r--arch/x86/kvm/cpuid.c4
-rw-r--r--arch/x86/kvm/cpuid.h8
-rw-r--r--arch/x86/kvm/mmu.c16
-rw-r--r--arch/x86/kvm/mmu.h4
-rw-r--r--arch/x86/kvm/paging_tmpl.h7
-rw-r--r--arch/x86/kvm/svm.c1
-rw-r--r--arch/x86/kvm/vmx.c1
-rw-r--r--arch/x86/kvm/x86.c59
-rw-r--r--arch/x86/mm/ioremap.c14
-rw-r--r--arch/x86/net/bpf_jit_comp.c178
-rw-r--r--arch/x86/pci/acpi.c24
-rw-r--r--arch/x86/vdso/Makefile2
-rw-r--r--arch/x86/vdso/vclock_gettime.c34
-rw-r--r--arch/x86/xen/enlighten.c27
-rw-r--r--arch/x86/xen/suspend.c10
-rw-r--r--block/blk-core.c7
-rw-r--r--block/blk-mq.c60
-rw-r--r--block/blk-sysfs.c2
-rw-r--r--block/bounce.c2
-rw-r--r--block/elevator.c6
-rw-r--r--crypto/af_alg.c4
-rw-r--r--crypto/algif_aead.c9
-rw-r--r--drivers/acpi/acpi_pnp.c2
-rw-r--r--drivers/acpi/acpica/utglobal.c13
-rw-r--r--drivers/acpi/osl.c6
-rw-r--r--drivers/acpi/resource.c2
-rw-r--r--drivers/acpi/sbs.c2
-rw-r--r--drivers/acpi/sbshc.c22
-rw-r--r--drivers/ata/Kconfig10
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/ahci.c103
-rw-r--r--drivers/ata/ahci_st.c49
-rw-r--r--drivers/ata/libahci.c3
-rw-r--r--drivers/ata/libata-core.c34
-rw-r--r--drivers/ata/libata-eh.c3
-rw-r--r--drivers/ata/pata_scc.c1110
-rw-r--r--drivers/block/drbd/drbd_receiver.c4
-rw-r--r--drivers/block/loop.c2
-rw-r--r--drivers/block/nvme-scsi.c6
-rw-r--r--drivers/block/rbd.c5
-rw-r--r--drivers/block/xen-blkback/blkback.c35
-rw-r--r--drivers/block/zram/zram_drv.c23
-rw-r--r--drivers/bluetooth/ath3k.c4
-rw-r--r--drivers/bluetooth/bt3c_cs.c3
-rw-r--r--drivers/bluetooth/btbcm.c148
-rw-r--r--drivers/bluetooth/btbcm.h6
-rw-r--r--drivers/bluetooth/btusb.c406
-rw-r--r--drivers/bluetooth/hci_ath.c98
-rw-r--r--drivers/bus/arm-cci.c2
-rw-r--r--drivers/bus/omap_l3_noc.c5
-rw-r--r--drivers/bus/omap_l3_noc.h54
-rw-r--r--drivers/char/hw_random/bcm63xx-rng.c18
-rw-r--r--drivers/char/ipmi/ipmi_msghandler.c4
-rw-r--r--drivers/char/ipmi/ipmi_si_intf.c16
-rw-r--r--drivers/char/ipmi/ipmi_ssif.c213
-rw-r--r--drivers/clk/clk-si5351.c63
-rw-r--r--drivers/clk/clk.c8
-rw-r--r--drivers/clk/qcom/gcc-msm8916.c4
-rw-r--r--drivers/clk/samsung/Makefile2
-rw-r--r--drivers/clk/samsung/clk-exynos5420.c1
-rw-r--r--drivers/clk/samsung/clk-exynos5433.c12
-rw-r--r--drivers/cpuidle/cpuidle.c16
-rw-r--r--drivers/dma/Kconfig1
-rw-r--r--drivers/dma/dmaengine.c4
-rw-r--r--drivers/dma/sh/usb-dmac.c2
-rw-r--r--drivers/extcon/extcon-usb-gpio.c24
-rw-r--r--drivers/firmware/dmi_scan.c12
-rw-r--r--drivers/firmware/efi/runtime-map.c6
-rw-r--r--drivers/gpio/gpio-omap.c48
-rw-r--r--drivers/gpio/gpiolib-acpi.c2
-rw-r--r--drivers/gpio/gpiolib-sysfs.c19
-rw-r--r--drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c7
-rw-r--r--drivers/gpu/drm/amd/amdkfd/kfd_topology.c4
-rw-r--r--drivers/gpu/drm/drm_irq.c9
-rw-r--r--drivers/gpu/drm/exynos/exynos7_drm_decon.c4
-rw-r--r--drivers/gpu/drm/exynos/exynos_dp_core.c13
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_crtc.c10
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_crtc.h10
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_drv.h20
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_fb.c39
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_fimd.c53
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_fimd.h15
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_plane.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_drm_vidi.c2
-rw-r--r--drivers/gpu/drm/exynos/exynos_mixer.c72
-rw-r--r--drivers/gpu/drm/i915/i915_drv.c13
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h2
-rw-r--r--drivers/gpu/drm/i915/intel_display.c3
-rw-r--r--drivers/gpu/drm/i915/intel_dp.c9
-rw-r--r--drivers/gpu/drm/i915/intel_lvds.c26
-rw-r--r--drivers/gpu/drm/i915/intel_pm.c24
-rw-r--r--drivers/gpu/drm/i915/intel_uncore.c8
-rw-r--r--drivers/gpu/drm/msm/adreno/adreno_gpu.c2
-rw-r--r--drivers/gpu/drm/msm/dsi/dsi.c10
-rw-r--r--drivers/gpu/drm/msm/dsi/dsi_host.c21
-rw-r--r--drivers/gpu/drm/msm/dsi/dsi_manager.c6
-rw-r--r--drivers/gpu/drm/msm/edp/edp_aux.c4
-rw-r--r--drivers/gpu/drm/msm/edp/edp_connector.c2
-rw-r--r--drivers/gpu/drm/msm/edp/edp_ctrl.c3
-rw-r--r--drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c34
-rw-r--r--drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h9
-rw-r--r--drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c12
-rw-r--r--drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c2
-rw-r--r--drivers/gpu/drm/msm/msm_drv.c24
-rw-r--r--drivers/gpu/drm/msm/msm_fb.c7
-rw-r--r--drivers/gpu/drm/msm/msm_gem.c2
-rw-r--r--drivers/gpu/drm/msm/msm_iommu.c4
-rw-r--r--drivers/gpu/drm/msm/msm_ringbuffer.c2
-rw-r--r--drivers/gpu/drm/radeon/atombios_crtc.c3
-rw-r--r--drivers/gpu/drm/radeon/atombios_dp.c20
-rw-r--r--drivers/gpu/drm/radeon/atombios_encoders.c6
-rw-r--r--drivers/gpu/drm/radeon/cik.c4
-rw-r--r--drivers/gpu/drm/radeon/dce6_afmt.c25
-rw-r--r--drivers/gpu/drm/radeon/evergreen.c2
-rw-r--r--drivers/gpu/drm/radeon/evergreen_hdmi.c53
-rw-r--r--drivers/gpu/drm/radeon/ni.c5
-rw-r--r--drivers/gpu/drm/radeon/r600.c2
-rw-r--r--drivers/gpu/drm/radeon/r600_hdmi.c9
-rw-r--r--drivers/gpu/drm/radeon/radeon.h1
-rw-r--r--drivers/gpu/drm/radeon/radeon_asic.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_asic.h4
-rw-r--r--drivers/gpu/drm/radeon/radeon_audio.c34
-rw-r--r--drivers/gpu/drm/radeon/radeon_connectors.c8
-rw-r--r--drivers/gpu/drm/radeon/radeon_cs.c4
-rw-r--r--drivers/gpu/drm/radeon/radeon_dp_auxch.c2
-rw-r--r--drivers/gpu/drm/radeon/radeon_dp_mst.c3
-rw-r--r--drivers/gpu/drm/radeon/radeon_mn.c13
-rw-r--r--drivers/gpu/drm/radeon/radeon_ttm.c8
-rw-r--r--drivers/gpu/drm/radeon/radeon_uvd.c144
-rw-r--r--drivers/gpu/drm/radeon/radeon_vce.c65
-rw-r--r--drivers/gpu/drm/radeon/radeon_vm.c36
-rw-r--r--drivers/gpu/drm/radeon/rv770.c2
-rw-r--r--drivers/gpu/drm/radeon/rv770d.h3
-rw-r--r--drivers/gpu/drm/radeon/si.c4
-rw-r--r--drivers/gpu/drm/radeon/si_dpm.c1
-rw-r--r--drivers/gpu/drm/radeon/uvd_v1_0.c14
-rw-r--r--drivers/gpu/drm/radeon/uvd_v2_2.c29
-rw-r--r--drivers/gpu/drm/rockchip/rockchip_drm_vop.c9
-rw-r--r--drivers/gpu/drm/tegra/drm.c1
-rw-r--r--drivers/hid/hid-ids.h1
-rw-r--r--drivers/hid/hid-logitech-hidpp.c20
-rw-r--r--drivers/hid/hid-sensor-hub.c13
-rw-r--r--drivers/hid/i2c-hid/i2c-hid.c5
-rw-r--r--drivers/hid/usbhid/hid-quirks.c1
-rw-r--r--drivers/hid/wacom_wac.c3
-rw-r--r--drivers/ide/Kconfig9
-rw-r--r--drivers/ide/Makefile1
-rw-r--r--drivers/ide/scc_pata.c887
-rw-r--r--drivers/iio/accel/mma9551_core.c21
-rw-r--r--drivers/iio/accel/mma9553.c18
-rw-r--r--drivers/iio/accel/st_accel_core.c1
-rw-r--r--drivers/iio/adc/axp288_adc.c12
-rw-r--r--drivers/iio/adc/cc10001_adc.c60
-rw-r--r--drivers/iio/adc/mcp320x.c6
-rw-r--r--drivers/iio/adc/qcom-spmi-vadc.c7
-rw-r--r--drivers/iio/adc/xilinx-xadc-core.c5
-rw-r--r--drivers/iio/adc/xilinx-xadc.h6
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_core.c2
-rw-r--r--drivers/iio/gyro/st_gyro_core.c1
-rw-r--r--drivers/iio/kfifo_buf.c3
-rw-r--r--drivers/iio/light/hid-sensor-prox.c12
-rw-r--r--drivers/iio/magnetometer/st_magn_core.c1
-rw-r--r--drivers/iio/pressure/bmp280.c1
-rw-r--r--drivers/iio/pressure/hid-sensor-press.c2
-rw-r--r--drivers/iio/pressure/st_pressure_core.c1
-rw-r--r--drivers/infiniband/core/addr.c13
-rw-r--r--drivers/infiniband/core/cm.c25
-rw-r--r--drivers/infiniband/core/cm_msgs.h4
-rw-r--r--drivers/infiniband/core/cma.c59
-rw-r--r--drivers/infiniband/core/iwpm_msg.c75
-rw-r--r--drivers/infiniband/core/iwpm_util.c208
-rw-r--r--drivers/infiniband/core/iwpm_util.h15
-rw-r--r--drivers/infiniband/core/umem_odp.c14
-rw-r--r--drivers/infiniband/hw/cxgb4/cm.c87
-rw-r--r--drivers/infiniband/hw/cxgb4/cq.c22
-rw-r--r--drivers/infiniband/hw/cxgb4/device.c41
-rw-r--r--drivers/infiniband/hw/cxgb4/iw_cxgb4.h7
-rw-r--r--drivers/infiniband/hw/cxgb4/mem.c6
-rw-r--r--drivers/infiniband/hw/cxgb4/qp.c10
-rw-r--r--drivers/infiniband/hw/cxgb4/t4.h7
-rw-r--r--drivers/infiniband/hw/cxgb4/t4fw_ri_api.h4
-rw-r--r--drivers/infiniband/hw/ehca/ehca_mcast.c4
-rw-r--r--drivers/infiniband/hw/mlx4/alias_GUID.c7
-rw-r--r--drivers/infiniband/hw/mlx4/mad.c11
-rw-r--r--drivers/infiniband/hw/mlx4/main.c3
-rw-r--r--drivers/infiniband/hw/mlx5/qp.c2
-rw-r--r--drivers/infiniband/hw/nes/nes.c1
-rw-r--r--drivers/infiniband/hw/nes/nes_cm.c65
-rw-r--r--drivers/infiniband/hw/ocrdma/ocrdma.h4
-rw-r--r--drivers/infiniband/hw/ocrdma/ocrdma_ah.c12
-rw-r--r--drivers/infiniband/hw/ocrdma/ocrdma_hw.c83
-rw-r--r--drivers/infiniband/hw/ocrdma/ocrdma_sli.h9
-rw-r--r--drivers/infiniband/hw/ocrdma/ocrdma_verbs.c12
-rw-r--r--drivers/infiniband/hw/qib/qib.h3
-rw-r--r--drivers/infiniband/hw/qib/qib_file_ops.c3
-rw-r--r--drivers/infiniband/hw/qib/qib_iba6120.c8
-rw-r--r--drivers/infiniband/hw/qib/qib_iba7220.c8
-rw-r--r--drivers/infiniband/hw/qib/qib_iba7322.c41
-rw-r--r--drivers/infiniband/hw/qib/qib_init.c26
-rw-r--r--drivers/infiniband/hw/qib/qib_wc_x86_64.c32
-rw-r--r--drivers/infiniband/ulp/ipoib/ipoib_cm.c4
-rw-r--r--drivers/input/joydev.c61
-rw-r--r--drivers/input/mouse/Kconfig2
-rw-r--r--drivers/input/mouse/alps.c5
-rw-r--r--drivers/input/mouse/elantech.c2
-rw-r--r--drivers/input/touchscreen/stmpe-ts.c2
-rw-r--r--drivers/input/touchscreen/sx8654.c2
-rw-r--r--drivers/iommu/amd_iommu_v2.c1
-rw-r--r--drivers/iommu/arm-smmu.c30
-rw-r--r--drivers/iommu/rockchip-iommu.c4
-rw-r--r--drivers/irqchip/irq-gic.c71
-rw-r--r--drivers/irqchip/irq-tegra.c2
-rw-r--r--drivers/isdn/mISDN/socket.c12
-rw-r--r--drivers/md/bitmap.c7
-rw-r--r--drivers/md/dm-crypt.c12
-rw-r--r--drivers/md/dm-ioctl.c17
-rw-r--r--drivers/md/dm.c19
-rw-r--r--drivers/md/md.c4
-rw-r--r--drivers/md/raid0.c9
-rw-r--r--drivers/md/raid5.c125
-rw-r--r--drivers/media/platform/marvell-ccic/mcam-core.c14
-rw-r--r--drivers/media/platform/marvell-ccic/mcam-core.h8
-rw-r--r--drivers/media/platform/soc_camera/rcar_vin.c7
-rw-r--r--drivers/mfd/janz-cmodio.c4
-rw-r--r--drivers/mmc/card/block.c12
-rw-r--r--drivers/mmc/card/queue.c2
-rw-r--r--drivers/mmc/card/queue.h2
-rw-r--r--drivers/mmc/core/core.c1
-rw-r--r--drivers/mmc/host/atmel-mci.c9
-rw-r--r--drivers/mmc/host/dw_mmc.c7
-rw-r--r--drivers/mmc/host/sh_mmcif.c2
-rw-r--r--drivers/mtd/devices/m25p80.c6
-rw-r--r--drivers/mtd/tests/readtest.c6
-rw-r--r--drivers/mtd/ubi/block.c2
-rw-r--r--drivers/net/Kconfig14
-rw-r--r--drivers/net/Makefile1
-rw-r--r--drivers/net/bonding/bond_3ad.c26
-rw-r--r--drivers/net/bonding/bond_main.c66
-rw-r--r--drivers/net/bonding/bond_netlink.c50
-rw-r--r--drivers/net/bonding/bond_options.c93
-rw-r--r--drivers/net/bonding/bond_procfs.c8
-rw-r--r--drivers/net/bonding/bond_sysfs.c46
-rw-r--r--drivers/net/can/flexcan.c53
-rw-r--r--drivers/net/can/janz-ican3.c125
-rw-r--r--drivers/net/can/xilinx_can.c7
-rw-r--r--drivers/net/dsa/Kconfig12
-rw-r--r--drivers/net/dsa/bcm_sf2.c7
-rw-r--r--drivers/net/dsa/mv88e6123_61_65.c186
-rw-r--r--drivers/net/dsa/mv88e6131.c185
-rw-r--r--drivers/net/dsa/mv88e6171.c234
-rw-r--r--drivers/net/dsa/mv88e6352.c188
-rw-r--r--drivers/net/dsa/mv88e6xxx.c639
-rw-r--r--drivers/net/dsa/mv88e6xxx.h99
-rw-r--r--drivers/net/ethernet/altera/altera_tse_main.c6
-rw-r--r--drivers/net/ethernet/amd/Kconfig5
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-common.h155
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-dcb.c17
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-desc.c35
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-dev.c99
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-drv.c340
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c79
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-main.c384
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe-mdio.c1237
-rw-r--r--drivers/net/ethernet/amd/xgbe/xgbe.h236
-rw-r--r--drivers/net/ethernet/apm/xgene/Kconfig1
-rw-r--r--drivers/net/ethernet/apm/xgene/Makefile2
-rw-r--r--drivers/net/ethernet/apm/xgene/xgene_enet_hw.c36
-rw-r--r--drivers/net/ethernet/apm/xgene/xgene_enet_hw.h8
-rw-r--r--drivers/net/ethernet/apm/xgene/xgene_enet_main.c207
-rw-r--r--drivers/net/ethernet/apm/xgene/xgene_enet_main.h30
-rw-r--r--drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c200
-rw-r--r--drivers/net/ethernet/apm/xgene/xgene_enet_ring2.h49
-rw-r--r--drivers/net/ethernet/apm/xgene/xgene_enet_sgmac.c62
-rw-r--r--drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.c1
-rw-r--r--drivers/net/ethernet/apm/xgene/xgene_enet_xgmac.h20
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_hw.h2
-rw-r--r--drivers/net/ethernet/broadcom/bcmsysport.c63
-rw-r--r--drivers/net/ethernet/broadcom/bcmsysport.h4
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x.h4
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c79
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h2
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c22
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c2
-rw-r--r--drivers/net/ethernet/broadcom/tg3.c2
-rw-r--r--drivers/net/ethernet/cadence/macb.c85
-rw-r--r--drivers/net/ethernet/cadence/macb.h10
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4.h37
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_ethtool.c2
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c129
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h1
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/sge.c320
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_hw.c852
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_hw.h34
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_msg.h83
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_values.h23
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h4
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c13
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/sge.c88
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_clsf.c31
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_ethtool.c10
-rw-r--r--drivers/net/ethernet/emulex/benet/Kconfig9
-rw-r--r--drivers/net/ethernet/emulex/benet/be.h55
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.c56
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.h50
-rw-r--r--drivers/net/ethernet/emulex/benet/be_ethtool.c11
-rw-r--r--drivers/net/ethernet/emulex/benet/be_hw.h14
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c505
-rw-r--r--drivers/net/ethernet/emulex/benet/be_roce.c2
-rw-r--r--drivers/net/ethernet/emulex/benet/be_roce.h2
-rw-r--r--drivers/net/ethernet/freescale/fec_main.c83
-rw-r--r--drivers/net/ethernet/freescale/gianfar.c53
-rw-r--r--drivers/net/ethernet/hisilicon/hip04_eth.c2
-rw-r--r--drivers/net/ethernet/hisilicon/hix5hd2_gmac.c1
-rw-r--r--drivers/net/ethernet/ibm/ibmveth.c41
-rw-r--r--drivers/net/ethernet/ibm/ibmveth.h5
-rw-r--r--drivers/net/ethernet/intel/e100.c2
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_main.c19
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c2
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h1
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c23
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c32
-rw-r--r--drivers/net/ethernet/intel/fm10k/fm10k_main.c4
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c7
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_txrx.c2
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_txrx.c2
-rw-r--r--drivers/net/ethernet/intel/igb/igb_main.c42
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c10
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c8
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c4
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c8
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c106
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c2
-rw-r--r--drivers/net/ethernet/marvell/mvneta.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/cmd.c21
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_netdev.c3
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_port.c2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_rx.c26
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_tx.c8
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/eq.c24
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/fw.c18
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/main.c12
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mlx4_en.h1
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/resource_tracker.c34
-rw-r--r--drivers/net/ethernet/moxa/moxart_ether.c1
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c8
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_main.c4
-rw-r--r--drivers/net/ethernet/qualcomm/qca_spi.c48
-rw-r--r--drivers/net/ethernet/realtek/r8169.c4
-rw-r--r--drivers/net/ethernet/rocker/rocker.c1143
-rw-r--r--drivers/net/ethernet/rocker/rocker.h28
-rw-r--r--drivers/net/ethernet/sfc/Makefile2
-rw-r--r--drivers/net/ethernet/sfc/ef10.c614
-rw-r--r--drivers/net/ethernet/sfc/ef10_sriov.c738
-rw-r--r--drivers/net/ethernet/sfc/ef10_sriov.h64
-rw-r--r--drivers/net/ethernet/sfc/efx.c259
-rw-r--r--drivers/net/ethernet/sfc/efx.h15
-rw-r--r--drivers/net/ethernet/sfc/enum.h2
-rw-r--r--drivers/net/ethernet/sfc/ethtool.c7
-rw-r--r--drivers/net/ethernet/sfc/falcon.c33
-rw-r--r--drivers/net/ethernet/sfc/farch.c64
-rw-r--r--drivers/net/ethernet/sfc/mcdi.c128
-rw-r--r--drivers/net/ethernet/sfc/mcdi.h10
-rw-r--r--drivers/net/ethernet/sfc/mcdi_pcol.h404
-rw-r--r--drivers/net/ethernet/sfc/mcdi_port.c1
-rw-r--r--drivers/net/ethernet/sfc/net_driver.h32
-rw-r--r--drivers/net/ethernet/sfc/nic.h134
-rw-r--r--drivers/net/ethernet/sfc/ptp.c40
-rw-r--r--drivers/net/ethernet/sfc/siena.c27
-rw-r--r--drivers/net/ethernet/sfc/siena_sriov.c156
-rw-r--r--drivers/net/ethernet/sfc/siena_sriov.h79
-rw-r--r--drivers/net/ethernet/sfc/sriov.c72
-rw-r--r--drivers/net/ethernet/sfc/sriov.h29
-rw-r--r--drivers/net/ethernet/smsc/smc91x.c20
-rw-r--r--drivers/net/ethernet/smsc/smsc911x.c12
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Kconfig76
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Makefile13
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c41
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c99
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c24
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c27
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c21
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-sti.c29
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c25
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac.h14
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c34
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c19
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c112
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h9
-rw-r--r--drivers/net/ethernet/ti/netcp_core.c3
-rw-r--r--drivers/net/ethernet/ti/netcp_ethss.c8
-rw-r--r--drivers/net/ethernet/tile/tilepro.c3
-rw-r--r--drivers/net/ethernet/toshiba/spider_net.c3
-rw-r--r--drivers/net/ethernet/via/via-rhine.c249
-rw-r--r--drivers/net/ethernet/xilinx/ll_temac_main.c8
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet.h108
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet_main.c288
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c30
-rw-r--r--drivers/net/geneve.c503
-rw-r--r--drivers/net/hyperv/hyperv_net.h22
-rw-r--r--drivers/net/hyperv/netvsc.c60
-rw-r--r--drivers/net/hyperv/netvsc_drv.c140
-rw-r--r--drivers/net/hyperv/rndis_filter.c3
-rw-r--r--drivers/net/ieee802154/at86rf230.c390
-rw-r--r--drivers/net/ipvlan/ipvlan.h5
-rw-r--r--drivers/net/ipvlan/ipvlan_core.c138
-rw-r--r--drivers/net/ipvlan/ipvlan_main.c25
-rw-r--r--drivers/net/macvlan.c15
-rw-r--r--drivers/net/macvtap.c34
-rw-r--r--drivers/net/phy/Kconfig6
-rw-r--r--drivers/net/phy/Makefile1
-rw-r--r--drivers/net/phy/amd-xgbe-phy.c1862
-rw-r--r--drivers/net/phy/mdio-bitbang.c7
-rw-r--r--drivers/net/phy/mdio-gpio.c6
-rw-r--r--drivers/net/phy/micrel.c3
-rw-r--r--drivers/net/phy/phy.c65
-rw-r--r--drivers/net/ppp/pppoe.c8
-rw-r--r--drivers/net/ppp/pppox.c2
-rw-r--r--drivers/net/ppp/pptp.c4
-rw-r--r--drivers/net/team/team.c10
-rw-r--r--drivers/net/tun.c26
-rw-r--r--drivers/net/usb/cdc_ncm.c2
-rw-r--r--drivers/net/usb/r8152.c1
-rw-r--r--drivers/net/usb/usbnet.c4
-rw-r--r--drivers/net/vxlan.c7
-rw-r--r--drivers/net/wireless/adm8211.c7
-rw-r--r--drivers/net/wireless/at76c50x-usb.h2
-rw-r--r--drivers/net/wireless/ath/ar5523/ar5523.c3
-rw-r--r--drivers/net/wireless/ath/ath10k/mac.c36
-rw-r--r--drivers/net/wireless/ath/ath5k/ath5k.h1
-rw-r--r--drivers/net/wireless/ath/ath5k/led.c2
-rw-r--r--drivers/net/wireless/ath/ath5k/mac80211-ops.c16
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_main.c3
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_txrx.c9
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c3
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c5
-rw-r--r--drivers/net/wireless/ath/ath9k/xmit.c52
-rw-r--r--drivers/net/wireless/ath/carl9170/fw.c3
-rw-r--r--drivers/net/wireless/ath/carl9170/led.c2
-rw-r--r--drivers/net/wireless/ath/carl9170/main.c7
-rw-r--r--drivers/net/wireless/b43/main.c8
-rw-r--r--drivers/net/wireless/b43legacy/main.c8
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c5
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/main.c2
-rw-r--r--drivers/net/wireless/cw1200/sta.c10
-rw-r--r--drivers/net/wireless/iwlegacy/3945-mac.c4
-rw-r--r--drivers/net/wireless/iwlegacy/4965-mac.c4
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/mac80211.c8
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-nvm-parse.c2
-rw-r--r--drivers/net/wireless/libertas_tf/main.c7
-rw-r--r--drivers/net/wireless/mac80211_hwsim.c55
-rw-r--r--drivers/net/wireless/mwl8k.c2
-rw-r--r--drivers/net/wireless/p54/fwio.c3
-rw-r--r--drivers/net/wireless/p54/led.c2
-rw-r--r--drivers/net/wireless/p54/main.c6
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.c19
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.h5
-rw-r--r--drivers/net/wireless/rt2x00/rt2800pci.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2800soc.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mac.c6
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c4
-rw-r--r--drivers/net/wireless/rtlwifi/core.h3
-rw-r--r--drivers/net/wireless/rtlwifi/usb.c2
-rw-r--r--drivers/net/wireless/ti/wl1251/main.c9
-rw-r--r--drivers/net/wireless/ti/wlcore/main.c6
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.c4
-rw-r--r--drivers/of/of_mdio.c3
-rw-r--r--drivers/parisc/superio.c2
-rw-r--r--drivers/pinctrl/core.c10
-rw-r--r--drivers/pinctrl/core.h2
-rw-r--r--drivers/pinctrl/devicetree.c2
-rw-r--r--drivers/pinctrl/mediatek/pinctrl-mtk-common.c2
-rw-r--r--drivers/pinctrl/mvebu/pinctrl-armada-370.c2
-rw-r--r--drivers/pinctrl/qcom/pinctrl-spmi-gpio.c14
-rw-r--r--drivers/pinctrl/qcom/pinctrl-spmi-mpp.c10
-rw-r--r--drivers/platform/x86/ideapad-laptop.c7
-rw-r--r--drivers/platform/x86/thinkpad_acpi.c2
-rw-r--r--drivers/power/axp288_fuel_gauge.c1
-rw-r--r--drivers/power/bq27x00_battery.c8
-rw-r--r--drivers/power/collie_battery.c2
-rw-r--r--drivers/power/reset/Kconfig1
-rw-r--r--drivers/power/reset/at91-reset.c4
-rw-r--r--drivers/power/reset/ltc2952-poweroff.c18
-rw-r--r--drivers/pwm/pwm-img.c76
-rw-r--r--drivers/rtc/Kconfig10
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/rtc-abx80x.c307
-rw-r--r--drivers/rtc/rtc-armada38x.c26
-rw-r--r--drivers/s390/char/con3215.c2
-rw-r--r--drivers/s390/crypto/ap_bus.c20
-rw-r--r--drivers/s390/net/lcs.c2
-rw-r--r--drivers/s390/net/qeth_core.h2
-rw-r--r--drivers/s390/net/qeth_core_main.c3
-rw-r--r--drivers/s390/net/qeth_core_mpc.c3
-rw-r--r--drivers/s390/net/qeth_core_mpc.h3
-rw-r--r--drivers/s390/net/qeth_l2_main.c124
-rw-r--r--drivers/s390/net/qeth_l2_sys.c74
-rw-r--r--drivers/s390/net/qeth_l3_main.c9
-rw-r--r--drivers/scsi/3w-9xxx.c57
-rw-r--r--drivers/scsi/3w-9xxx.h5
-rw-r--r--drivers/scsi/3w-sas.c50
-rw-r--r--drivers/scsi/3w-sas.h4
-rw-r--r--drivers/scsi/3w-xxxx.c42
-rw-r--r--drivers/scsi/3w-xxxx.h5
-rw-r--r--drivers/scsi/aha1542.c23
-rw-r--r--drivers/scsi/scsi_devinfo.c1
-rw-r--r--drivers/scsi/scsi_scan.c6
-rw-r--r--drivers/sh/pm_runtime.c7
-rw-r--r--drivers/spi/Kconfig3
-rw-r--r--drivers/spi/spi-bcm2835.c5
-rw-r--r--drivers/spi/spi-bitbang.c17
-rw-r--r--drivers/spi/spi-fsl-cpm.c40
-rw-r--r--drivers/spi/spi-fsl-espi.c45
-rw-r--r--drivers/spi/spi-omap2-mcspi.c16
-rw-r--r--drivers/spi/spi.c9
-rw-r--r--drivers/staging/gdm724x/gdm_mux.c16
-rw-r--r--drivers/staging/media/omap4iss/Kconfig1
-rw-r--r--drivers/staging/media/omap4iss/iss.c11
-rw-r--r--drivers/staging/media/omap4iss/iss.h4
-rw-r--r--drivers/staging/media/omap4iss/iss_csiphy.c12
-rw-r--r--drivers/staging/rtl8712/rtl871x_ioctl_linux.c17
-rw-r--r--drivers/staging/sm750fb/sm750.c2
-rw-r--r--drivers/staging/vt6655/card.c10
-rw-r--r--drivers/staging/vt6655/card.h2
-rw-r--r--drivers/staging/vt6655/device_main.c53
-rw-r--r--drivers/staging/vt6656/main_usb.c11
-rw-r--r--drivers/staging/vt6656/rxtx.c14
-rw-r--r--drivers/thermal/armada_thermal.c6
-rw-r--r--drivers/thermal/intel_powerclamp.c89
-rw-r--r--drivers/thermal/rockchip_thermal.c2
-rw-r--r--drivers/thermal/thermal_core.h2
-rw-r--r--drivers/thermal/ti-soc-thermal/dra752-thermal-data.c3
-rw-r--r--drivers/thermal/ti-soc-thermal/omap5-thermal-data.c3
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-bandgap.c78
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-bandgap.h6
-rw-r--r--drivers/tty/hvc/hvc_xen.c20
-rw-r--r--drivers/tty/n_gsm.c5
-rw-r--r--drivers/tty/n_hdlc.c4
-rw-r--r--drivers/tty/n_tty.c22
-rw-r--r--drivers/tty/pty.c5
-rw-r--r--drivers/tty/serial/8250/8250_pci.c25
-rw-r--r--drivers/tty/serial/amba-pl011.c5
-rw-r--r--drivers/tty/serial/atmel_serial.c2
-rw-r--r--drivers/tty/serial/earlycon.c9
-rw-r--r--drivers/tty/serial/of_serial.c1
-rw-r--r--drivers/tty/serial/omap-serial.c2
-rw-r--r--drivers/tty/serial/samsung.c5
-rw-r--r--drivers/tty/serial/serial_core.c2
-rw-r--r--drivers/tty/serial/uartlite.c11
-rw-r--r--drivers/tty/serial/xilinx_uartps.c12
-rw-r--r--drivers/tty/tty_buffer.c41
-rw-r--r--drivers/tty/tty_ioctl.c3
-rw-r--r--drivers/usb/chipidea/debug.c6
-rw-r--r--drivers/usb/chipidea/otg_fsm.c4
-rw-r--r--drivers/usb/class/cdc-acm.c7
-rw-r--r--drivers/usb/core/quirks.c3
-rw-r--r--drivers/usb/dwc3/dwc3-omap.c94
-rw-r--r--drivers/usb/gadget/configfs.c1
-rw-r--r--drivers/usb/gadget/function/f_hid.c16
-rw-r--r--drivers/usb/gadget/function/u_serial.c5
-rw-r--r--drivers/usb/gadget/legacy/acm_ms.c10
-rw-r--r--drivers/usb/gadget/legacy/audio.c10
-rw-r--r--drivers/usb/gadget/legacy/cdc2.c10
-rw-r--r--drivers/usb/gadget/legacy/dbgp.c4
-rw-r--r--drivers/usb/gadget/legacy/ether.c12
-rw-r--r--drivers/usb/gadget/legacy/g_ffs.c2
-rw-r--r--drivers/usb/gadget/legacy/gmidi.c10
-rw-r--r--drivers/usb/gadget/legacy/hid.c12
-rw-r--r--drivers/usb/gadget/legacy/mass_storage.c6
-rw-r--r--drivers/usb/gadget/legacy/multi.c10
-rw-r--r--drivers/usb/gadget/legacy/ncm.c10
-rw-r--r--drivers/usb/gadget/legacy/nokia.c10
-rw-r--r--drivers/usb/gadget/legacy/printer.c8
-rw-r--r--drivers/usb/gadget/legacy/serial.c4
-rw-r--r--drivers/usb/gadget/legacy/tcm_usb_gadget.c2
-rw-r--r--drivers/usb/gadget/legacy/webcam.c8
-rw-r--r--drivers/usb/gadget/legacy/zero.c4
-rw-r--r--drivers/usb/gadget/udc/at91_udc.c4
-rw-r--r--drivers/usb/gadget/udc/atmel_usba_udc.c4
-rw-r--r--drivers/usb/gadget/udc/fsl_udc_core.c4
-rw-r--r--drivers/usb/gadget/udc/fusb300_udc.c4
-rw-r--r--drivers/usb/gadget/udc/m66592-udc.c4
-rw-r--r--drivers/usb/gadget/udc/r8a66597-udc.c4
-rw-r--r--drivers/usb/gadget/udc/udc-xilinx.c4
-rw-r--r--drivers/usb/host/ehci-msm.c13
-rw-r--r--drivers/usb/host/xhci-ring.c7
-rw-r--r--drivers/usb/host/xhci.h2
-rw-r--r--drivers/usb/phy/phy-isp1301-omap.c2
-rw-r--r--drivers/usb/serial/cp210x.c1
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h4
-rw-r--r--drivers/usb/serial/visor.c2
-rw-r--r--drivers/usb/storage/uas-detect.h11
-rw-r--r--drivers/usb/storage/uas.c16
-rw-r--r--drivers/usb/storage/unusual_devs.h7
-rw-r--r--drivers/usb/storage/usb.c8
-rw-r--r--drivers/vfio/pci/vfio_pci.c8
-rw-r--r--drivers/vfio/vfio.c21
-rw-r--r--drivers/xen/events/events_2l.c10
-rw-r--r--drivers/xen/events/events_base.c19
-rw-r--r--drivers/xen/gntdev.c28
-rw-r--r--drivers/xen/grant-table.c28
-rw-r--r--drivers/xen/manage.c9
-rw-r--r--drivers/xen/swiotlb-xen.c2
-rw-r--r--drivers/xen/xen-pciback/conf_space.c6
-rw-r--r--drivers/xen/xen-pciback/conf_space.h2
-rw-r--r--drivers/xen/xen-pciback/conf_space_header.c2
-rw-r--r--drivers/xen/xenbus/xenbus_probe.c29
-rw-r--r--fs/afs/rxrpc.c2
-rw-r--r--fs/btrfs/delayed-inode.c2
-rw-r--r--fs/btrfs/extent-tree.c121
-rw-r--r--fs/btrfs/extent_io.c73
-rw-r--r--fs/btrfs/free-space-cache.c26
-rw-r--r--fs/btrfs/inode.c21
-rw-r--r--fs/btrfs/ioctl.c3
-rw-r--r--fs/btrfs/ordered-data.c14
-rw-r--r--fs/btrfs/volumes.c15
-rw-r--r--fs/configfs/mount.c2
-rw-r--r--fs/dlm/lowcomms.c16
-rw-r--r--fs/efivarfs/super.c2
-rw-r--r--fs/exec.c3
-rw-r--r--fs/ext4/Kconfig9
-rw-r--r--fs/ext4/crypto_fname.c280
-rw-r--r--fs/ext4/crypto_key.c1
-rw-r--r--fs/ext4/crypto_policy.c14
-rw-r--r--fs/ext4/dir.c2
-rw-r--r--fs/ext4/ext4.h17
-rw-r--r--fs/ext4/ext4_crypto.h11
-rw-r--r--fs/ext4/ext4_jbd2.c6
-rw-r--r--fs/ext4/extents.c25
-rw-r--r--fs/ext4/extents_status.c8
-rw-r--r--fs/ext4/inode.c4
-rw-r--r--fs/ext4/namei.c72
-rw-r--r--fs/ext4/resize.c7
-rw-r--r--fs/ext4/super.c2
-rw-r--r--fs/ext4/symlink.c2
-rw-r--r--fs/f2fs/data.c7
-rw-r--r--fs/f2fs/f2fs.h1
-rw-r--r--fs/f2fs/namei.c8
-rw-r--r--fs/f2fs/super.c1
-rw-r--r--fs/hostfs/hostfs_kern.c2
-rw-r--r--fs/jbd2/recovery.c10
-rw-r--r--fs/jbd2/revoke.c18
-rw-r--r--fs/jbd2/transaction.c25
-rw-r--r--fs/kernfs/dir.c9
-rw-r--r--fs/namei.c22
-rw-r--r--fs/namespace.c6
-rw-r--r--fs/nfs/nfs4proc.c3
-rw-r--r--fs/nfs/write.c13
-rw-r--r--fs/nfsd/blocklayout.c11
-rw-r--r--fs/nfsd/nfs4callback.c119
-rw-r--r--fs/nfsd/nfs4state.c147
-rw-r--r--fs/nfsd/state.h19
-rw-r--r--fs/nfsd/xdr4.h1
-rw-r--r--fs/nilfs2/btree.c2
-rw-r--r--fs/ocfs2/dlm/dlmmaster.c13
-rw-r--r--fs/splice.c12
-rw-r--r--include/acpi/actypes.h1
-rw-r--r--include/drm/drm_pciids.h1
-rw-r--r--include/linux/blk_types.h2
-rw-r--r--include/linux/blkdev.h2
-rw-r--r--include/linux/bpf.h22
-rw-r--r--include/linux/compiler-gcc.h16
-rw-r--r--include/linux/compiler-intel.h3
-rw-r--r--include/linux/compiler.h4
-rw-r--r--include/linux/etherdevice.h42
-rw-r--r--include/linux/filter.h30
-rw-r--r--include/linux/ftrace_event.h2
-rw-r--r--include/linux/gfp.h7
-rw-r--r--include/linux/hid-sensor-hub.h4
-rw-r--r--include/linux/if_pppox.h2
-rw-r--r--include/linux/if_vlan.h2
-rw-r--r--include/linux/igmp.h1
-rw-r--r--include/linux/irqchip/arm-gic.h2
-rw-r--r--include/linux/kexec.h4
-rw-r--r--include/linux/libata.h10
-rw-r--r--include/linux/mdio-gpio.h3
-rw-r--r--include/linux/memcontrol.h4
-rw-r--r--include/linux/mm_types.h18
-rw-r--r--include/linux/net.h3
-rw-r--r--include/linux/netdev_features.h5
-rw-r--r--include/linux/netdevice.h35
-rw-r--r--include/linux/netfilter.h39
-rw-r--r--include/linux/netfilter/ipset/ip_set.h32
-rw-r--r--include/linux/netfilter/x_tables.h2
-rw-r--r--include/linux/netfilter_bridge.h16
-rw-r--r--include/linux/netfilter_ingress.h41
-rw-r--r--include/linux/netlink.h2
-rw-r--r--include/linux/nilfs2_fs.h2
-rw-r--r--include/linux/pci_ids.h4
-rw-r--r--include/linux/phy.h3
-rw-r--r--include/linux/platform_data/si5351.h4
-rw-r--r--include/linux/rhashtable.h19
-rw-r--r--include/linux/rtnetlink.h12
-rw-r--r--include/linux/sched.h8
-rw-r--r--include/linux/sched/rt.h7
-rw-r--r--include/linux/skbuff.h48
-rw-r--r--include/linux/tcp.h23
-rw-r--r--include/linux/tty.h3
-rw-r--r--include/linux/uidgid.h4
-rw-r--r--include/linux/usb_usual.h2
-rw-r--r--include/linux/util_macros.h2
-rw-r--r--include/net/addrconf.h1
-rw-r--r--include/net/af_vsock.h2
-rw-r--r--include/net/bond_options.h3
-rw-r--r--include/net/bonding.h3
-rw-r--r--include/net/cfg80211.h4
-rw-r--r--include/net/cfg802154.h2
-rw-r--r--include/net/checksum.h4
-rw-r--r--include/net/codel.h22
-rw-r--r--include/net/dst.h18
-rw-r--r--include/net/flow_dissector.h167
-rw-r--r--include/net/flow_keys.h45
-rw-r--r--include/net/geneve.h5
-rw-r--r--include/net/inet_common.h2
-rw-r--r--include/net/inet_connection_sock.h5
-rw-r--r--include/net/inet_hashtables.h2
-rw-r--r--include/net/ip.h25
-rw-r--r--include/net/ip6_fib.h41
-rw-r--r--include/net/ipv6.h19
-rw-r--r--include/net/llc_conn.h2
-rw-r--r--include/net/mac80211.h163
-rw-r--r--include/net/mac802154.h94
-rw-r--r--include/net/net_namespace.h3
-rw-r--r--include/net/netns/ipv4.h2
-rw-r--r--include/net/netns/ipv6.h1
-rw-r--r--include/net/request_sock.h4
-rw-r--r--include/net/sch_generic.h23
-rw-r--r--include/net/sock.h30
-rw-r--r--include/net/switchdev.h257
-rw-r--r--include/net/tcp.h86
-rw-r--r--include/rdma/ib_addr.h3
-rw-r--r--include/rdma/ib_cm.h7
-rw-r--r--include/rdma/iw_portmap.h25
-rw-r--r--include/scsi/scsi_devinfo.h1
-rw-r--r--include/sound/designware_i2s.h2
-rw-r--r--include/sound/emu10k1.h14
-rw-r--r--include/sound/soc-dapm.h2
-rw-r--r--include/sound/soc.h12
-rw-r--r--include/sound/spear_dma.h2
-rw-r--r--include/uapi/linux/bpf.h10
-rw-r--r--include/uapi/linux/can.h6
-rw-r--r--include/uapi/linux/ethtool.h6
-rw-r--r--include/uapi/linux/if_link.h12
-rw-r--r--include/uapi/linux/if_packet.h7
-rw-r--r--include/uapi/linux/inet_diag.h4
-rw-r--r--include/uapi/linux/mpls.h10
-rw-r--r--include/uapi/linux/netfilter.h6
-rw-r--r--include/uapi/linux/netfilter/nf_conntrack_tcp.h3
-rw-r--r--include/uapi/linux/netlink.h1
-rw-r--r--include/uapi/linux/nl80211.h28
-rw-r--r--include/uapi/linux/pkt_cls.h57
-rw-r--r--include/uapi/linux/pkt_sched.h7
-rw-r--r--include/uapi/linux/rtnetlink.h2
-rw-r--r--include/uapi/linux/snmp.h2
-rw-r--r--include/uapi/linux/tcp.h7
-rw-r--r--include/uapi/linux/virtio_ring.h2
-rw-r--r--include/uapi/rdma/rdma_netlink.h1
-rw-r--r--include/xen/events.h2
-rw-r--r--include/xen/grant_table.h1
-rw-r--r--include/xen/xen-ops.h1
-rw-r--r--init/do_mounts.c5
-rw-r--r--kernel/Makefile6
-rw-r--r--kernel/bpf/arraymap.c113
-rw-r--r--kernel/bpf/core.c85
-rw-r--r--kernel/bpf/syscall.c23
-rw-r--r--kernel/bpf/verifier.c17
-rw-r--r--kernel/events/core.c41
-rw-r--r--kernel/irq/dummychip.c1
-rw-r--r--kernel/kexec.c2
-rw-r--r--kernel/locking/rtmutex.c12
-rw-r--r--kernel/rcu/tree.c16
-rw-r--r--kernel/sched/core.c74
-rw-r--r--kernel/sched/idle.c16
-rw-r--r--kernel/seccomp.c70
-rw-r--r--kernel/time/clockevents.c6
-rw-r--r--kernel/trace/bpf_trace.c2
-rw-r--r--kernel/trace/trace_output.c3
-rw-r--r--kernel/watchdog.c20
-rw-r--r--lib/Kconfig.debug1
-rw-r--r--lib/Kconfig.kasan8
-rw-r--r--lib/find_last_bit.c41
-rw-r--r--lib/rhashtable.c19
-rw-r--r--lib/string.c2
-rw-r--r--lib/test_bpf.c2540
-rw-r--r--lib/test_rhashtable.c215
-rw-r--r--mm/hwpoison-inject.c13
-rw-r--r--mm/kmemleak.c3
-rw-r--r--mm/memory-failure.c16
-rw-r--r--mm/mempolicy.c2
-rw-r--r--mm/page-writeback.c6
-rw-r--r--mm/page_alloc.c98
-rw-r--r--mm/page_isolation.c3
-rw-r--r--net/8021q/vlan.c2
-rw-r--r--net/Kconfig3
-rw-r--r--net/appletalk/ddp.c2
-rw-r--r--net/atm/common.c4
-rw-r--r--net/atm/common.h2
-rw-r--r--net/atm/pvc.c2
-rw-r--r--net/atm/svc.c2
-rw-r--r--net/ax25/af_ax25.c4
-rw-r--r--net/bluetooth/bnep/sock.c2
-rw-r--r--net/bluetooth/cmtp/sock.c2
-rw-r--r--net/bluetooth/hci_core.c9
-rw-r--r--net/bluetooth/hci_sock.c2
-rw-r--r--net/bluetooth/hidp/sock.c2
-rw-r--r--net/bluetooth/l2cap_sock.c10
-rw-r--r--net/bluetooth/rfcomm/core.c2
-rw-r--r--net/bluetooth/rfcomm/sock.c8
-rw-r--r--net/bluetooth/sco.c8
-rw-r--r--net/bridge/br.c22
-rw-r--r--net/bridge/br_mdb.c2
-rw-r--r--net/bridge/br_multicast.c240
-rw-r--r--net/bridge/br_netfilter.c67
-rw-r--r--net/bridge/br_netlink.c28
-rw-r--r--net/bridge/br_private.h6
-rw-r--r--net/bridge/br_stp.c6
-rw-r--r--net/bridge/br_stp_timer.c2
-rw-r--r--net/bridge/netfilter/ebt_stp.c6
-rw-r--r--net/bridge/netfilter/ebtables.c6
-rw-r--r--net/caif/caif_socket.c2
-rw-r--r--net/can/af_can.c2
-rw-r--r--net/ceph/messenger.c4
-rw-r--r--net/core/dev.c214
-rw-r--r--net/core/ethtool.c11
-rw-r--r--net/core/filter.c85
-rw-r--r--net/core/flow_dissector.c428
-rw-r--r--net/core/neighbour.c3
-rw-r--r--net/core/net-sysfs.c10
-rw-r--r--net/core/net_namespace.c133
-rw-r--r--net/core/pktgen.c100
-rw-r--r--net/core/rtnetlink.c27
-rw-r--r--net/core/skbuff.c323
-rw-r--r--net/core/sock.c39
-rw-r--r--net/core/stream.c6
-rw-r--r--net/decnet/af_decnet.c8
-rw-r--r--net/dsa/dsa.c2
-rw-r--r--net/dsa/slave.c54
-rw-r--r--net/ethernet/eth.c14
-rw-r--r--net/ieee802154/Makefile4
-rw-r--r--net/ieee802154/nl-phy.c5
-rw-r--r--net/ieee802154/nl802154.c2
-rw-r--r--net/ieee802154/rdev-ops.h85
-rw-r--r--net/ieee802154/socket.c2
-rw-r--r--net/ieee802154/trace.c7
-rw-r--r--net/ieee802154/trace.h247
-rw-r--r--net/ipv4/Kconfig4
-rw-r--r--net/ipv4/Makefile2
-rw-r--r--net/ipv4/af_inet.c6
-rw-r--r--net/ipv4/fib_semantics.c4
-rw-r--r--net/ipv4/fib_trie.c43
-rw-r--r--net/ipv4/geneve_core.c (renamed from net/ipv4/geneve.c)10
-rw-r--r--net/ipv4/igmp.c162
-rw-r--r--net/ipv4/inet_connection_sock.c19
-rw-r--r--net/ipv4/inet_diag.c8
-rw-r--r--net/ipv4/inet_hashtables.c7
-rw-r--r--net/ipv4/inet_timewait_sock.c2
-rw-r--r--net/ipv4/ip_fragment.c15
-rw-r--r--net/ipv4/ip_output.c42
-rw-r--r--net/ipv4/ip_tunnel_core.c20
-rw-r--r--net/ipv4/ipip.c3
-rw-r--r--net/ipv4/netfilter/arp_tables.c6
-rw-r--r--net/ipv4/netfilter/ip_tables.c6
-rw-r--r--net/ipv4/netfilter/ipt_CLUSTERIP.c5
-rw-r--r--net/ipv4/netfilter/ipt_SYNPROXY.c4
-rw-r--r--net/ipv4/ping.c1
-rw-r--r--net/ipv4/proc.c2
-rw-r--r--net/ipv4/route.c32
-rw-r--r--net/ipv4/sysctl_net_ipv4.c7
-rw-r--r--net/ipv4/tcp.c115
-rw-r--r--net/ipv4/tcp_dctcp.c20
-rw-r--r--net/ipv4/tcp_fastopen.c5
-rw-r--r--net/ipv4/tcp_illinois.c21
-rw-r--r--net/ipv4/tcp_input.c179
-rw-r--r--net/ipv4/tcp_ipv4.c7
-rw-r--r--net/ipv4/tcp_minisocks.c6
-rw-r--r--net/ipv4/tcp_output.c49
-rw-r--r--net/ipv4/tcp_timer.c4
-rw-r--r--net/ipv4/tcp_vegas.c19
-rw-r--r--net/ipv4/tcp_vegas.h3
-rw-r--r--net/ipv4/tcp_westwood.c15
-rw-r--r--net/ipv4/udp_tunnel.c8
-rw-r--r--net/ipv6/Makefile1
-rw-r--r--net/ipv6/addrconf.c2
-rw-r--r--net/ipv6/af_inet6.c3
-rw-r--r--net/ipv6/ip6_fib.c39
-rw-r--r--net/ipv6/ip6_flowlabel.c4
-rw-r--r--net/ipv6/ip6_output.c43
-rw-r--r--net/ipv6/ip6_udp_tunnel.c6
-rw-r--r--net/ipv6/mcast_snoop.c213
-rw-r--r--net/ipv6/netfilter/ip6_tables.c6
-rw-r--r--net/ipv6/route.c206
-rw-r--r--net/ipv6/sysctl_net_ipv6.c8
-rw-r--r--net/ipv6/tcp_ipv6.c3
-rw-r--r--net/ipv6/udp.c4
-rw-r--r--net/ipv6/xfrm6_policy.c14
-rw-r--r--net/ipx/af_ipx.c2
-rw-r--r--net/irda/af_irda.c2
-rw-r--r--net/iucv/af_iucv.c10
-rw-r--r--net/key/af_key.c2
-rw-r--r--net/l2tp/l2tp_core.c15
-rw-r--r--net/l2tp/l2tp_ppp.c4
-rw-r--r--net/llc/af_llc.c2
-rw-r--r--net/llc/llc_conn.c6
-rw-r--r--net/mac80211/Kconfig16
-rw-r--r--net/mac80211/cfg.c117
-rw-r--r--net/mac80211/chan.c10
-rw-r--r--net/mac80211/debugfs.c74
-rw-r--r--net/mac80211/debugfs_sta.c85
-rw-r--r--net/mac80211/driver-ops.h11
-rw-r--r--net/mac80211/ethtool.c3
-rw-r--r--net/mac80211/ibss.c5
-rw-r--r--net/mac80211/ieee80211_i.h36
-rw-r--r--net/mac80211/iface.c76
-rw-r--r--net/mac80211/key.c12
-rw-r--r--net/mac80211/key.h3
-rw-r--r--net/mac80211/led.c268
-rw-r--r--net/mac80211/led.h44
-rw-r--r--net/mac80211/main.c15
-rw-r--r--net/mac80211/mesh_plink.c37
-rw-r--r--net/mac80211/mlme.c57
-rw-r--r--net/mac80211/rate.c8
-rw-r--r--net/mac80211/rate.h14
-rw-r--r--net/mac80211/rx.c201
-rw-r--r--net/mac80211/sta_info.c29
-rw-r--r--net/mac80211/sta_info.h41
-rw-r--r--net/mac80211/status.c28
-rw-r--r--net/mac80211/tdls.c27
-rw-r--r--net/mac80211/trace.h42
-rw-r--r--net/mac80211/tx.c528
-rw-r--r--net/mac80211/wep.c6
-rw-r--r--net/mac802154/cfg.c9
-rw-r--r--net/mac802154/ieee802154_i.h3
-rw-r--r--net/mac802154/iface.c5
-rw-r--r--net/mac802154/llsec.c4
-rw-r--r--net/mac802154/main.c7
-rw-r--r--net/mpls/af_mpls.c18
-rw-r--r--net/mpls/internal.h10
-rw-r--r--net/netfilter/Kconfig9
-rw-r--r--net/netfilter/core.c37
-rw-r--r--net/netfilter/ipset/ip_set_bitmap_ip.c17
-rw-r--r--net/netfilter/ipset/ip_set_bitmap_ipmac.c13
-rw-r--r--net/netfilter/ipset/ip_set_bitmap_port.c3
-rw-r--r--net/netfilter/ipset/ip_set_core.c49
-rw-r--r--net/netfilter/ipset/ip_set_getport.c6
-rw-r--r--net/netfilter/ipset/ip_set_hash_gen.h22
-rw-r--r--net/netfilter/ipset/ip_set_hash_ip.c33
-rw-r--r--net/netfilter/ipset/ip_set_hash_ipmark.c43
-rw-r--r--net/netfilter/ipset/ip_set_hash_ipport.c49
-rw-r--r--net/netfilter/ipset/ip_set_hash_ipportip.c40
-rw-r--r--net/netfilter/ipset/ip_set_hash_ipportnet.c40
-rw-r--r--net/netfilter/ipset/ip_set_hash_mac.c11
-rw-r--r--net/netfilter/ipset/ip_set_hash_net.c28
-rw-r--r--net/netfilter/ipset/ip_set_hash_netiface.c29
-rw-r--r--net/netfilter/ipset/ip_set_hash_netnet.c30
-rw-r--r--net/netfilter/ipset/ip_set_hash_netport.c38
-rw-r--r--net/netfilter/ipset/ip_set_hash_netportnet.c52
-rw-r--r--net/netfilter/ipset/ip_set_list_set.c3
-rw-r--r--net/netfilter/ipvs/ip_vs_ctl.c3
-rw-r--r--net/netfilter/ipvs/ip_vs_sync.c30
-rw-r--r--net/netfilter/nf_conntrack_proto_tcp.c35
-rw-r--r--net/netfilter/nf_tables_api.c7
-rw-r--r--net/netfilter/nfnetlink_log.c19
-rw-r--r--net/netfilter/nfnetlink_queue_core.c20
-rw-r--r--net/netfilter/nft_compat.c2
-rw-r--r--net/netfilter/x_tables.c18
-rw-r--r--net/netfilter/xt_TCPMSS.c6
-rw-r--r--net/netfilter/xt_mark.c1
-rw-r--r--net/netfilter/xt_set.c3
-rw-r--r--net/netlink/af_netlink.c152
-rw-r--r--net/netrom/af_netrom.c4
-rw-r--r--net/nfc/af_nfc.c2
-rw-r--r--net/nfc/llcp.h2
-rw-r--r--net/nfc/llcp_core.c2
-rw-r--r--net/nfc/llcp_sock.c8
-rw-r--r--net/nfc/nfc.h2
-rw-r--r--net/nfc/rawsock.c4
-rw-r--r--net/openvswitch/Kconfig2
-rw-r--r--net/openvswitch/datapath.c2
-rw-r--r--net/openvswitch/flow.c4
-rw-r--r--net/openvswitch/flow_netlink.c2
-rw-r--r--net/openvswitch/vport-geneve.c5
-rw-r--r--net/packet/af_packet.c182
-rw-r--r--net/packet/internal.h12
-rw-r--r--net/phonet/af_phonet.c2
-rw-r--r--net/phonet/pep.c2
-rw-r--r--net/rds/af_rds.c2
-rw-r--r--net/rds/connection.c17
-rw-r--r--net/rds/ib_cm.c13
-rw-r--r--net/rds/tcp_connect.c1
-rw-r--r--net/rds/tcp_listen.c46
-rw-r--r--net/rose/af_rose.c4
-rw-r--r--net/rxrpc/af_rxrpc.c2
-rw-r--r--net/rxrpc/ar-local.c4
-rw-r--r--net/sched/Kconfig11
-rw-r--r--net/sched/Makefile1
-rw-r--r--net/sched/act_api.c5
-rw-r--r--net/sched/act_connmark.c2
-rw-r--r--net/sched/act_mirred.c2
-rw-r--r--net/sched/act_pedit.c5
-rw-r--r--net/sched/cls_api.c12
-rw-r--r--net/sched/cls_flow.c22
-rw-r--r--net/sched/cls_flower.c688
-rw-r--r--net/sched/sch_api.c12
-rw-r--r--net/sched/sch_choke.c20
-rw-r--r--net/sched/sch_codel.c17
-rw-r--r--net/sched/sch_fq_codel.c28
-rw-r--r--net/sched/sch_gred.c32
-rw-r--r--net/sched/sch_hhf.c19
-rw-r--r--net/sched/sch_ingress.c59
-rw-r--r--net/sched/sch_netem.c4
-rw-r--r--net/sched/sch_sfb.c24
-rw-r--r--net/sched/sch_sfq.c27
-rw-r--r--net/sctp/ipv6.c2
-rw-r--r--net/sctp/protocol.c2
-rw-r--r--net/socket.c7
-rw-r--r--net/sunrpc/auth_gss/gss_rpc_xdr.c23
-rw-r--r--net/switchdev/switchdev.c829
-rw-r--r--net/tipc/addr.c7
-rw-r--r--net/tipc/addr.h8
-rw-r--r--net/tipc/bcast.c41
-rw-r--r--net/tipc/bcast.h1
-rw-r--r--net/tipc/bearer.c37
-rw-r--r--net/tipc/bearer.h2
-rw-r--r--net/tipc/core.c4
-rw-r--r--net/tipc/core.h37
-rw-r--r--net/tipc/link.c322
-rw-r--r--net/tipc/link.h59
-rw-r--r--net/tipc/msg.c51
-rw-r--r--net/tipc/msg.h37
-rw-r--r--net/tipc/name_table.c34
-rw-r--r--net/tipc/net.c1
-rw-r--r--net/tipc/netlink_compat.c137
-rw-r--r--net/tipc/node.c3
-rw-r--r--net/tipc/node.h2
-rw-r--r--net/tipc/server.c6
-rw-r--r--net/tipc/socket.c3
-rw-r--r--net/tipc/subscr.c242
-rw-r--r--net/tipc/subscr.h18
-rw-r--r--net/unix/af_unix.c8
-rw-r--r--net/vmw_vsock/af_vsock.c7
-rw-r--r--net/vmw_vsock/vmci_transport.c2
-rw-r--r--net/wireless/chan.c65
-rw-r--r--net/wireless/nl80211.c7
-rw-r--r--net/wireless/reg.c4
-rw-r--r--net/x25/af_x25.c8
-rw-r--r--net/xfrm/xfrm_output.c12
-rw-r--r--samples/bpf/Makefile10
-rw-r--r--samples/bpf/bpf_helpers.h4
-rw-r--r--samples/bpf/bpf_load.c57
-rw-r--r--samples/bpf/sockex3_kern.c303
-rw-r--r--samples/bpf/sockex3_user.c66
-rw-r--r--samples/bpf/tracex5_kern.c75
-rw-r--r--samples/bpf/tracex5_user.c46
-rw-r--r--samples/pktgen/README.rst43
-rw-r--r--samples/pktgen/functions.sh121
-rw-r--r--samples/pktgen/parameters.sh97
-rwxr-xr-xsamples/pktgen/pktgen.conf-1-159
-rwxr-xr-xsamples/pktgen/pktgen.conf-2-166
-rwxr-xr-xsamples/pktgen/pktgen.conf-2-273
-rwxr-xr-xsamples/pktgen/pktgen_bench_xmit_mode_netif_receive.sh86
-rwxr-xr-xsamples/pktgen/pktgen_sample01_simple.sh71
-rwxr-xr-xsamples/pktgen/pktgen_sample02_multiqueue.sh75
-rwxr-xr-xsamples/pktgen/pktgen_sample03_burst_single_flow.sh82
-rw-r--r--sound/atmel/ac97c.c1
-rw-r--r--sound/core/pcm_lib.c2
-rw-r--r--sound/pci/emu10k1/emu10k1.c6
-rw-r--r--sound/pci/emu10k1/emu10k1_callback.c4
-rw-r--r--sound/pci/emu10k1/emu10k1_main.c21
-rw-r--r--sound/pci/emu10k1/emupcm.c2
-rw-r--r--sound/pci/emu10k1/memory.c11
-rw-r--r--sound/pci/hda/hda_codec.c24
-rw-r--r--sound/pci/hda/hda_generic.c11
-rw-r--r--sound/pci/hda/patch_conexant.c12
-rw-r--r--sound/pci/hda/patch_realtek.c76
-rw-r--r--sound/pci/hda/thinkpad_helper.c1
-rw-r--r--sound/soc/codecs/mc13783.c4
-rw-r--r--sound/soc/codecs/rt5645.c13
-rw-r--r--sound/soc/codecs/rt5677.c5
-rw-r--r--sound/soc/codecs/tfa9879.c4
-rw-r--r--sound/soc/codecs/uda1380.c2
-rw-r--r--sound/soc/codecs/wm8960.c2
-rw-r--r--sound/soc/codecs/wm8994.c2
-rw-r--r--sound/soc/davinci/davinci-mcasp.c2
-rw-r--r--sound/soc/fsl/fsl_ssi.c2
-rw-r--r--sound/soc/intel/Makefile2
-rw-r--r--sound/soc/intel/baytrail/sst-baytrail-ipc.c1
-rw-r--r--sound/soc/intel/haswell/sst-haswell-ipc.c1
-rw-r--r--sound/soc/qcom/lpass-cpu.c2
-rw-r--r--sound/soc/samsung/s3c24xx-i2s.c4
-rw-r--r--sound/soc/sh/rcar/dma.c1
-rw-r--r--sound/soc/soc-dapm.c11
-rw-r--r--sound/synth/emux/emux_oss.c11
-rw-r--r--sound/synth/emux/emux_seq.c29
-rw-r--r--sound/usb/quirks.c1
-rw-r--r--tools/lib/api/Makefile2
-rw-r--r--tools/lib/lockdep/Makefile3
-rw-r--r--tools/lib/lockdep/uinclude/linux/kernel.h3
-rw-r--r--tools/lib/traceevent/event-parse.c2
-rw-r--r--tools/perf/Makefile2
-rw-r--r--tools/perf/bench/futex-requeue.c15
-rw-r--r--tools/perf/bench/numa.c12
-rw-r--r--tools/perf/builtin-kmem.c58
-rw-r--r--tools/perf/builtin-report.c2
-rw-r--r--tools/perf/builtin-top.c2
-rw-r--r--tools/perf/builtin-trace.c10
-rw-r--r--tools/perf/util/probe-event.c2
-rw-r--r--tools/perf/util/probe-finder.c4
-rw-r--r--tools/testing/selftests/net/psock_fanout.c2
-rw-r--r--tools/testing/selftests/powerpc/pmu/Makefile2
-rw-r--r--tools/testing/selftests/powerpc/tm/Makefile2
-rw-r--r--tools/testing/selftests/x86/Makefile53
-rwxr-xr-xtools/testing/selftests/x86/check_cc.sh16
-rw-r--r--tools/testing/selftests/x86/run_x86_tests.sh13
-rw-r--r--tools/testing/selftests/x86/trivial_32bit_program.c4
-rw-r--r--tools/testing/selftests/x86/trivial_64bit_program.c18
-rw-r--r--tools/thermal/tmon/Makefile8
-rw-r--r--tools/vm/Makefile2
1296 files changed, 31708 insertions, 16699 deletions
diff --git a/CREDITS b/CREDITS
index 40cc4bfb34db..ec7e6c7fdd1b 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3709,6 +3709,13 @@ N: Dirk Verworner
D: Co-author of German book ``Linux-Kernel-Programmierung''
D: Co-founder of Berlin Linux User Group
+N: Andrew Victor
+E: linux@maxim.org.za
+W: http://maxim.org.za/at91_26.html
+D: First maintainer of Atmel ARM-based SoC, aka AT91
+D: Introduced support for at91rm9200, the first chip of AT91 family
+S: South Africa
+
N: Riku Voipio
E: riku.voipio@iki.fi
D: Author of PCA9532 LED and Fintek f75375s hwmon driver
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio b/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio
new file mode 100644
index 000000000000..4d08f28dc871
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-pci-drivers-janz-cmodio
@@ -0,0 +1,8 @@
+What: /sys/bus/pci/drivers/janz-cmodio/.../modulbus_number
+Date: May 2010
+KernelVersion: 2.6.35
+Contact: Ira W. Snyder <ira.snyder@gmail.com>
+Description:
+ Value representing the HEX switch S2 of the janz carrier board CMOD-IO or CAN-PCI2
+
+ Read-only: value of the configuration switch (0..15)
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
index 5ecfd72ba684..668604fc8e06 100644
--- a/Documentation/ABI/testing/sysfs-class-net
+++ b/Documentation/ABI/testing/sysfs-class-net
@@ -39,6 +39,25 @@ Description:
Format is a string, e.g: 00:11:22:33:44:55 for an Ethernet MAC
address.
+What: /sys/class/net/<bridge iface>/bridge/group_fwd_mask
+Date: January 2012
+KernelVersion: 3.2
+Contact: netdev@vger.kernel.org
+Description:
+ Bitmask to allow forwarding of link local frames with address
+ 01-80-C2-00-00-0X on a bridge device. Only values that set bits
+ not matching BR_GROUPFWD_RESTRICTED in net/bridge/br_private.h
+ allowed.
+ Default value 0 does not forward any link local frames.
+
+ Restricted bits:
+ 0: 01-80-C2-00-00-00 Bridge Group Address used for STP
+ 1: 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE
+ 2: 01-80-C2-00-00-02 (Link Aggregation) 802.3ad
+
+ Any values not setting these bits can be used. Take special
+ care when forwarding control frames e.g. 802.1X-PAE or LLDP.
+
What: /sys/class/net/<iface>/broadcast
Date: April 2005
KernelVersion: 2.6.12
diff --git a/Documentation/ABI/testing/sysfs-class-net-janz-ican3 b/Documentation/ABI/testing/sysfs-class-net-janz-ican3
new file mode 100644
index 000000000000..fdbc03a2b8f8
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-janz-ican3
@@ -0,0 +1,19 @@
+What: /sys/class/net/<iface>/termination
+Date: May 2010
+KernelVersion: 2.6.35
+Contact: Ira W. Snyder <ira.snyder@gmail.com>
+Description:
+ Value representing the can bus termination
+
+ Default: 1 (termination active)
+ Reading: get actual termination state
+ Writing: set actual termination state (0=no termination, 1=termination active)
+
+What: /sys/class/net/<iface>/fwinfo
+Date: May 2015
+KernelVersion: 3.19
+Contact: Andreas Gröger <andreas24groeger@gmail.com>
+Description:
+ Firmware stamp of ican3 module
+ Read-only: 32 byte string identification of the ICAN3 module
+ (known values: "JANZ-ICAN3 ICANOS 1.xx", "JANZ-ICAN3 CAL/CANopen 1.xx")
diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt
index 653d5d739d7f..31d1d658827f 100644
--- a/Documentation/IPMI.txt
+++ b/Documentation/IPMI.txt
@@ -505,7 +505,10 @@ at module load time (for a module) with:
The addresses are normal I2C addresses. The adapter is the string
name of the adapter, as shown in /sys/class/i2c-adapter/i2c-<n>/name.
-It is *NOT* i2c-<n> itself.
+It is *NOT* i2c-<n> itself. Also, the comparison is done ignoring
+spaces, so if the name is "This is an I2C chip" you can say
+adapter_name=ThisisanI2cchip. This is because it's hard to pass in
+spaces in kernel parameters.
The debug flags are bit flags for each BMC found, they are:
IPMI messages: 1, driver state: 2, timing: 4, I2C probe: 8
diff --git a/Documentation/acpi/enumeration.txt b/Documentation/acpi/enumeration.txt
index 750401f91341..15dfce708ebf 100644
--- a/Documentation/acpi/enumeration.txt
+++ b/Documentation/acpi/enumeration.txt
@@ -253,7 +253,7 @@ input driver:
GPIO support
~~~~~~~~~~~~
ACPI 5 introduced two new resources to describe GPIO connections: GpioIo
-and GpioInt. These resources are used be used to pass GPIO numbers used by
+and GpioInt. These resources can be used to pass GPIO numbers used by
the device to the driver. ACPI 5.1 extended this with _DSD (Device
Specific Data) which made it possible to name the GPIOs among other things.
diff --git a/Documentation/acpi/gpio-properties.txt b/Documentation/acpi/gpio-properties.txt
index ae36fcf86dc7..f35dad11f0de 100644
--- a/Documentation/acpi/gpio-properties.txt
+++ b/Documentation/acpi/gpio-properties.txt
@@ -1,9 +1,9 @@
_DSD Device Properties Related to GPIO
--------------------------------------
-With the release of ACPI 5.1 and the _DSD configuration objecte names
-can finally be given to GPIOs (and other things as well) returned by
-_CRS. Previously, we were only able to use an integer index to find
+With the release of ACPI 5.1, the _DSD configuration object finally
+allows names to be given to GPIOs (and other things as well) returned
+by _CRS. Previously, we were only able to use an integer index to find
the corresponding GPIO, which is pretty error prone (it depends on
the _CRS output ordering, for example).
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
index 974624ea68f6..161448da959d 100644
--- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -6,6 +6,7 @@ provided by Arteris.
Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
+ Should be "ti,omap5-l3-noc" for OMAP5 family
Should be "ti,dra7-l3-noc" for DRA7 family
Should be "ti,am4372-l3-noc" for AM43 family
- reg: Contains L3 register address range for each noc domain.
diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
index c40711e8e8f7..28b28309f535 100644
--- a/Documentation/devicetree/bindings/clock/silabs,si5351.txt
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -17,7 +17,8 @@ Required properties:
- #clock-cells: from common clock binding; shall be set to 1.
- clocks: from common clock binding; list of parent clock
handles, shall be xtal reference clock or xtal and clkin for
- si5351c only.
+ si5351c only. Corresponding clock input names are "xtal" and
+ "clkin" respectively.
- #address-cells: shall be set to 1.
- #size-cells: shall be set to 0.
@@ -71,6 +72,7 @@ i2c-master-node {
/* connect xtal input to 25MHz reference */
clocks = <&ref25>;
+ clock-names = "xtal";
/* connect xtal input as source of pll0 and pll1 */
silabs,pll-source = <0 0>, <1 0>;
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
index a4873e5e3e36..e30e184f50c7 100644
--- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
80 81 68 69
70 71 72 73
74 75 76 77>;
- interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
"saif0", "saif1", "i2c0", "i2c1",
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
diff --git a/Documentation/devicetree/bindings/mtd/m25p80.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
index f20b111b502a..2bee68103b01 100644
--- a/Documentation/devicetree/bindings/mtd/m25p80.txt
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
@@ -8,8 +8,8 @@ Required properties:
is not Linux-only, but in case of Linux, see the "m25p_ids"
table in drivers/mtd/devices/m25p80.c for the list of supported
chips.
- Must also include "nor-jedec" for any SPI NOR flash that can be
- identified by the JEDEC READ ID opcode (0x9F).
+ Must also include "jedec,spi-nor" for any SPI NOR flash that can
+ be identified by the JEDEC READ ID opcode (0x9F).
- reg : Chip-Select number
- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
@@ -25,7 +25,7 @@ Example:
flash: m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "spansion,m25p80", "nor-jedec";
+ compatible = "spansion,m25p80", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
m25p,fast-read;
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
deleted file mode 100644
index 8db32384a486..000000000000
--- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* AMD 10GbE PHY driver (amd-xgbe-phy)
-
-Required properties:
-- compatible: Should be "amd,xgbe-phy-seattle-v1a" and
- "ethernet-phy-ieee802.3-c45"
-- reg: Address and length of the register sets for the device
- - SerDes Rx/Tx registers
- - SerDes integration registers (1/2)
- - SerDes integration registers (2/2)
-- interrupt-parent: Should be the phandle for the interrupt controller
- that services interrupts for this device
-- interrupts: Should contain the amd-xgbe-phy interrupt.
-
-Optional properties:
-- amd,speed-set: Speed capabilities of the device
- 0 - 1GbE and 10GbE (default)
- 1 - 2.5GbE and 10GbE
-
-The following optional properties are represented by an array with each
-value corresponding to a particular speed. The first array value represents
-the setting for the 1GbE speed, the second value for the 2.5GbE speed and
-the third value for the 10GbE speed. All three values are required if the
-property is used.
-- amd,serdes-blwc: Baseline wandering correction enablement
- 0 - Off
- 1 - On
-- amd,serdes-cdr-rate: CDR rate speed selection
-- amd,serdes-pq-skew: PQ (data sampling) skew
-- amd,serdes-tx-amp: TX amplitude boost
-- amd,serdes-dfe-tap-config: DFE taps available to run
-- amd,serdes-dfe-tap-enable: DFE taps to enable
-
-Example:
- xgbe_phy@e1240800 {
- compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45";
- reg = <0 0xe1240800 0 0x00400>,
- <0 0xe1250000 0 0x00060>,
- <0 0xe1250080 0 0x00004>;
- interrupt-parent = <&gic>;
- interrupts = <0 323 4>;
- amd,speed-set = <0>;
- amd,serdes-blwc = <1>, <1>, <0>;
- amd,serdes-cdr-rate = <2>, <2>, <7>;
- amd,serdes-pq-skew = <10>, <10>, <30>;
- amd,serdes-tx-amp = <15>, <15>, <10>;
- amd,serdes-dfe-tap-config = <3>, <3>, <1>;
- amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
- };
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt
index 26efd526d16c..4bb624a73b54 100644
--- a/Documentation/devicetree/bindings/net/amd-xgbe.txt
+++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt
@@ -5,12 +5,16 @@ Required properties:
- reg: Address and length of the register sets for the device
- MAC registers
- PCS registers
+ - SerDes Rx/Tx registers
+ - SerDes integration registers (1/2)
+ - SerDes integration registers (2/2)
- interrupt-parent: Should be the phandle for the interrupt controller
that services interrupts for this device
- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
listed is required and is the general device interrupt. If the optional
amd,per-channel-interrupt property is specified, then one additional
- interrupt for each DMA channel supported by the device should be specified
+ interrupt for each DMA channel supported by the device should be specified.
+ The last interrupt listed should be the PCS auto-negotiation interrupt.
- clocks:
- DMA clock for the amd-xgbe device (used for calculating the
correct Rx interrupt watchdog timer value on a DMA channel
@@ -19,7 +23,6 @@ Required properties:
- clock-names: Should be the names of the clocks
- "dma_clk" for the DMA clock
- "ptp_clk" for the PTP clock
-- phy-handle: See ethernet.txt file in the same directory
- phy-mode: See ethernet.txt file in the same directory
Optional properties:
@@ -29,19 +32,46 @@ Optional properties:
- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
a unique interrupt for each DMA channel - this requires an additional
interrupt be configured for each DMA channel
+- amd,speed-set: Speed capabilities of the device
+ 0 - 1GbE and 10GbE (default)
+ 1 - 2.5GbE and 10GbE
+
+The following optional properties are represented by an array with each
+value corresponding to a particular speed. The first array value represents
+the setting for the 1GbE speed, the second value for the 2.5GbE speed and
+the third value for the 10GbE speed. All three values are required if the
+property is used.
+- amd,serdes-blwc: Baseline wandering correction enablement
+ 0 - Off
+ 1 - On
+- amd,serdes-cdr-rate: CDR rate speed selection
+- amd,serdes-pq-skew: PQ (data sampling) skew
+- amd,serdes-tx-amp: TX amplitude boost
+- amd,serdes-dfe-tap-config: DFE taps available to run
+- amd,serdes-dfe-tap-enable: DFE taps to enable
Example:
xgbe@e0700000 {
compatible = "amd,xgbe-seattle-v1a";
reg = <0 0xe0700000 0 0x80000>,
- <0 0xe0780000 0 0x80000>;
+ <0 0xe0780000 0 0x80000>,
+ <0 0xe1240800 0 0x00400>,
+ <0 0xe1250000 0 0x00060>,
+ <0 0xe1250080 0 0x00004>;
interrupt-parent = <&gic>;
interrupts = <0 325 4>,
- <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>;
+ <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>,
+ <0 323 4>;
amd,per-channel-interrupt;
clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
clock-names = "dma_clk", "ptp_clk";
- phy-handle = <&phy>;
phy-mode = "xgmii";
mac-address = [ 02 a1 a2 a3 a4 a5 ];
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <30>;
+ amd,serdes-tx-amp = <15>, <15>, <10>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
};
diff --git a/Documentation/devicetree/bindings/net/cdns-emac.txt b/Documentation/devicetree/bindings/net/cdns-emac.txt
index abd67c13d344..4451ee973223 100644
--- a/Documentation/devicetree/bindings/net/cdns-emac.txt
+++ b/Documentation/devicetree/bindings/net/cdns-emac.txt
@@ -3,7 +3,8 @@
Required properties:
- compatible: Should be "cdns,[<chip>-]{emac}"
Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
- or the generic form: "cdns,emac".
+ Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
+ Or the generic form: "cdns,emac".
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
- phy-mode: see ethernet.txt file in the same directory.
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
index ba19d671e808..8ec5fdf444e9 100644
--- a/Documentation/devicetree/bindings/net/macb.txt
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -9,6 +9,7 @@ Required properties:
the Cadence GEM, or the generic form: "cdns,gem".
Use "cdns,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
Use "cdns,sama5d4-gem" for the Gigabit IP available on Atmel sama5d4 SoCs.
+ Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
- phy-mode: See ethernet.txt file in the same directory.
diff --git a/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt b/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt
new file mode 100644
index 000000000000..7edba1264f6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nxp,lpc1850-dwmac.txt
@@ -0,0 +1,20 @@
+* NXP LPC1850 GMAC ethernet controller
+
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+Required properties:
+ - compatible: Should contain "nxp,lpc1850-dwmac"
+
+Examples:
+
+mac: ethernet@40010000 {
+ compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
+ reg = <0x40010000 0x2000>;
+ interrupts = <5>;
+ interrupt-names = "macirq";
+ clocks = <&ccu1 CLK_CPU_ETHERNET>;
+ clock-names = "stmmaceth";
+ resets = <&rgu 22>;
+ reset-names = "stmmaceth";
+}
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 40831fbaff72..525e1658f2da 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -30,6 +30,9 @@ Optional Properties:
- max-speed: Maximum PHY supported speed (10, 100, 1000...)
+- broken-turn-around: If set, indicates the PHY device does not correctly
+ release the turn around line low at the end of a MDIO transaction.
+
Example:
ethernet-phy@0 {
diff --git a/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
new file mode 100644
index 000000000000..be789685a1c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/abracon,abx80x.txt
@@ -0,0 +1,30 @@
+Abracon ABX80X I2C ultra low power RTC/Alarm chip
+
+The Abracon ABX80X family consist of the ab0801, ab0803, ab0804, ab0805, ab1801,
+ab1803, ab1804 and ab1805. The ab0805 is the superset of ab080x and the ab1805
+is the superset of ab180x.
+
+Required properties:
+
+ - "compatible": should one of:
+ "abracon,abx80x"
+ "abracon,ab0801"
+ "abracon,ab0803"
+ "abracon,ab0804"
+ "abracon,ab0805"
+ "abracon,ab1801"
+ "abracon,ab1803"
+ "abracon,ab1804"
+ "abracon,ab1805"
+ Using "abracon,abx80x" will enable chip autodetection.
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+The abx804 and abx805 have a trickle charger that is able to charge the
+connected battery or supercap. Both the following properties have to be defined
+and valid to enable charging:
+
+ - "abracon,tc-diode": should be "standard" (0.6V) or "schottky" (0.3V)
+ - "abracon,tc-resistor": should be <0>, <3>, <6> or <11>. 0 disables the output
+ resistor, the other values are in ohm.
diff --git a/Documentation/kasan.txt b/Documentation/kasan.txt
index 092fc10961fe..4692241789b1 100644
--- a/Documentation/kasan.txt
+++ b/Documentation/kasan.txt
@@ -9,7 +9,9 @@ a fast and comprehensive solution for finding use-after-free and out-of-bounds
bugs.
KASan uses compile-time instrumentation for checking every memory access,
-therefore you will need a certain version of GCC > 4.9.2
+therefore you will need a gcc version of 4.9.2 or later. KASan could detect out
+of bounds accesses to stack or global variables, but only if gcc 5.0 or later was
+used to built the kernel.
Currently KASan is supported only for x86_64 architecture and requires that the
kernel be built with the SLUB allocator.
@@ -23,8 +25,8 @@ To enable KASAN configure kernel with:
and choose between CONFIG_KASAN_OUTLINE and CONFIG_KASAN_INLINE. Outline/inline
is compiler instrumentation types. The former produces smaller binary the
-latter is 1.1 - 2 times faster. Inline instrumentation requires GCC 5.0 or
-latter.
+latter is 1.1 - 2 times faster. Inline instrumentation requires a gcc version
+of 5.0 or later.
Currently KASAN works only with the SLUB memory allocator.
For better bug detection and nicer report, enable CONFIG_STACKTRACE and put
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index f6befa9855c1..61ab1628a057 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3787,6 +3787,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
READ_CAPACITY_16 command);
f = NO_REPORT_OPCODES (don't use report opcodes
command, uas only);
+ g = MAX_SECTORS_240 (don't transfer more than
+ 240 sectors at a time, uas only);
h = CAPACITY_HEURISTICS (decrease the
reported device capacity by one
sector if the number is odd);
diff --git a/Documentation/module-signing.txt b/Documentation/module-signing.txt
index 09c2382ad055..c72702ec1ded 100644
--- a/Documentation/module-signing.txt
+++ b/Documentation/module-signing.txt
@@ -119,9 +119,9 @@ Most notably, in the x509.genkey file, the req_distinguished_name section
should be altered from the default:
[ req_distinguished_name ]
- O = Magrathea
- CN = Glacier signing key
- emailAddress = slartibartfast@magrathea.h2g2
+ #O = Unspecified company
+ CN = Build time autogenerated kernel key
+ #emailAddress = unspecified.user@unspecified.company
The generated RSA key size can also be set with:
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 83bf4986baea..334b49ef02d1 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -51,6 +51,7 @@ Table of Contents
3.4 Configuring Bonding Manually via Sysfs
3.5 Configuration with Interfaces Support
3.6 Overriding Configuration for Special Cases
+3.7 Configuring LACP for 802.3ad mode in a more secure way
4. Querying Bonding Configuration
4.1 Bonding Configuration
@@ -178,6 +179,27 @@ active_slave
active slave, or the empty string if there is no active slave or
the current mode does not use an active slave.
+ad_actor_sys_prio
+
+ In an AD system, this specifies the system priority. The allowed range
+ is 1 - 65535. If the value is not specified, it takes 65535 as the
+ default value.
+
+ This parameter has effect only in 802.3ad mode and is available through
+ SysFs interface.
+
+ad_actor_system
+
+ In an AD system, this specifies the mac-address for the actor in
+ protocol packet exchanges (LACPDUs). The value cannot be NULL or
+ multicast. It is preferred to have the local-admin bit set for this
+ mac but driver does not enforce it. If the value is not given then
+ system defaults to using the masters' mac address as actors' system
+ address.
+
+ This parameter has effect only in 802.3ad mode and is available through
+ SysFs interface.
+
ad_select
Specifies the 802.3ad aggregation selection logic to use. The
@@ -220,6 +242,21 @@ ad_select
This option was added in bonding version 3.4.0.
+ad_user_port_key
+
+ In an AD system, the port-key has three parts as shown below -
+
+ Bits Use
+ 00 Duplex
+ 01-05 Speed
+ 06-15 User-defined
+
+ This defines the upper 10 bits of the port key. The values can be
+ from 0 - 1023. If not given, the system defaults to 0.
+
+ This parameter has effect only in 802.3ad mode and is available through
+ SysFs interface.
+
all_slaves_active
Specifies that duplicate frames (received on inactive ports) should be
@@ -1622,6 +1659,53 @@ output port selection.
This feature first appeared in bonding driver version 3.7.0 and support for
output slave selection was limited to round-robin and active-backup modes.
+3.7 Configuring LACP for 802.3ad mode in a more secure way
+----------------------------------------------------------
+
+When using 802.3ad bonding mode, the Actor (host) and Partner (switch)
+exchange LACPDUs. These LACPDUs cannot be sniffed, because they are
+destined to link local mac addresses (which switches/bridges are not
+supposed to forward). However, most of the values are easily predictable
+or are simply the machine's MAC address (which is trivially known to all
+other hosts in the same L2). This implies that other machines in the L2
+domain can spoof LACPDU packets from other hosts to the switch and potentially
+cause mayhem by joining (from the point of view of the switch) another
+machine's aggregate, thus receiving a portion of that hosts incoming
+traffic and / or spoofing traffic from that machine themselves (potentially
+even successfully terminating some portion of flows). Though this is not
+a likely scenario, one could avoid this possibility by simply configuring
+few bonding parameters:
+
+ (a) ad_actor_system : You can set a random mac-address that can be used for
+ these LACPDU exchanges. The value can not be either NULL or Multicast.
+ Also it's preferable to set the local-admin bit. Following shell code
+ generates a random mac-address as described above.
+
+ # sys_mac_addr=$(printf '%02x:%02x:%02x:%02x:%02x:%02x' \
+ $(( (RANDOM & 0xFE) | 0x02 )) \
+ $(( RANDOM & 0xFF )) \
+ $(( RANDOM & 0xFF )) \
+ $(( RANDOM & 0xFF )) \
+ $(( RANDOM & 0xFF )) \
+ $(( RANDOM & 0xFF )))
+ # echo $sys_mac_addr > /sys/class/net/bond0/bonding/ad_actor_system
+
+ (b) ad_actor_sys_prio : Randomize the system priority. The default value
+ is 65535, but system can take the value from 1 - 65535. Following shell
+ code generates random priority and sets it.
+
+ # sys_prio=$(( 1 + RANDOM + RANDOM ))
+ # echo $sys_prio > /sys/class/net/bond0/bonding/ad_actor_sys_prio
+
+ (c) ad_user_port_key : Use the user portion of the port-key. The default
+ keeps this empty. These are the upper 10 bits of the port-key and value
+ ranges from 0 - 1023. Following shell code generates these 10 bits and
+ sets it.
+
+ # usr_port_key=$(( RANDOM & 0x3FF ))
+ # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key
+
+
4 Querying Bonding Configuration
=================================
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 5abad1e921ca..b48d4a149411 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -268,6 +268,9 @@ solution for a couple of reasons:
struct can_frame {
canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */
__u8 can_dlc; /* frame payload length in byte (0 .. 8) */
+ __u8 __pad; /* padding */
+ __u8 __res0; /* reserved / padding */
+ __u8 __res1; /* reserved / padding */
__u8 data[8] __attribute__((aligned(8)));
};
diff --git a/Documentation/networking/dctcp.txt b/Documentation/networking/dctcp.txt
index 0d5dfbc89ec9..13a857753208 100644
--- a/Documentation/networking/dctcp.txt
+++ b/Documentation/networking/dctcp.txt
@@ -8,6 +8,7 @@ the data center network to provide multi-bit feedback to the end hosts.
To enable it on end hosts:
sysctl -w net.ipv4.tcp_congestion_control=dctcp
+ sysctl -w net.ipv4.tcp_ecn_fallback=0 (optional)
All switches in the data center network running DCTCP must support ECN
marking and be configured for marking when reaching defined switch buffer
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 071fb18dc57c..cb083e0d682c 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -267,6 +267,15 @@ tcp_ecn - INTEGER
but do not request ECN on outgoing connections.
Default: 2
+tcp_ecn_fallback - BOOLEAN
+ If the kernel detects that ECN connection misbehaves, enable fall
+ back to non-ECN. Currently, this knob implements the fallback
+ from RFC3168, section 6.1.1.1., but we reserve that in future,
+ additional detection mechanisms could be implemented under this
+ knob. The value is not used, if tcp_ecn or per route (or congestion
+ control) ECN settings are disabled.
+ Default: 1 (fallback enabled)
+
tcp_fack - BOOLEAN
Enable FACK congestion avoidance and fast retransmission.
The value is not used, if tcp_sack is not enabled.
@@ -1213,6 +1222,14 @@ auto_flowlabels - BOOLEAN
FALSE: disabled
Default: false
+flowlabel_state_ranges - BOOLEAN
+ Split the flow label number space into two ranges. 0-0x7FFFF is
+ reserved for the IPv6 flow manager facility, 0x80000-0xFFFFF
+ is reserved for stateless flow labels as described in RFC6437.
+ TRUE: enabled
+ FALSE: disabled
+ Default: true
+
anycast_src_echo_reply - BOOLEAN
Controls the use of anycast addresses as source addresses for ICMPv6
echo reply
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index 0344f1d45b37..f4be85e96005 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -1,6 +1,6 @@
- HOWTO for the linux packet generator
+ HOWTO for the linux packet generator
------------------------------------
Enable CONFIG_NET_PKTGEN to compile and build pktgen either in-kernel
@@ -50,17 +50,33 @@ For ixgbe use e.g. "30" resulting in approx 33K interrupts/sec (1/30*10^6):
# ethtool -C ethX rx-usecs 30
-Viewing threads
-===============
-/proc/net/pktgen/kpktgend_0
-Name: kpktgend_0 max_before_softirq: 10000
-Running:
-Stopped: eth1
-Result: OK: max_before_softirq=10000
+Kernel threads
+==============
+Pktgen creates a thread for each CPU with affinity to that CPU.
+Which is controlled through procfile /proc/net/pktgen/kpktgend_X.
+
+Example: /proc/net/pktgen/kpktgend_0
+
+ Running:
+ Stopped: eth4@0
+ Result: OK: add_device=eth4@0
+
+Most important are the devices assigned to the thread.
+
+The two basic thread commands are:
+ * add_device DEVICE@NAME -- adds a single device
+ * rem_device_all -- remove all associated devices
+
+When adding a device to a thread, a corrosponding procfile is created
+which is used for configuring this device. Thus, device names need to
+be unique.
-Most important are the devices assigned to the thread. Note that a
-device can only belong to one thread.
+To support adding the same device to multiple threads, which is useful
+with multi queue NICs, a the device naming scheme is extended with "@":
+ device@something
+The part after "@" can be anything, but it is custom to use the thread
+number.
Viewing devices
===============
@@ -69,29 +85,32 @@ The Params section holds configured information. The Current section
holds running statistics. The Result is printed after a run or after
interruption. Example:
-/proc/net/pktgen/eth1
+/proc/net/pktgen/eth4@0
-Params: count 10000000 min_pkt_size: 60 max_pkt_size: 60
- frags: 0 delay: 0 clone_skb: 1000000 ifname: eth1
+ Params: count 100000 min_pkt_size: 60 max_pkt_size: 60
+ frags: 0 delay: 0 clone_skb: 64 ifname: eth4@0
flows: 0 flowlen: 0
- dst_min: 10.10.11.2 dst_max:
- src_min: src_max:
- src_mac: 00:00:00:00:00:00 dst_mac: 00:04:23:AC:FD:82
- udp_src_min: 9 udp_src_max: 9 udp_dst_min: 9 udp_dst_max: 9
- src_mac_count: 0 dst_mac_count: 0
- Flags:
-Current:
- pkts-sofar: 10000000 errors: 39664
- started: 1103053986245187us stopped: 1103053999346329us idle: 880401us
- seq_num: 10000011 cur_dst_mac_offset: 0 cur_src_mac_offset: 0
- cur_saddr: 0x10a0a0a cur_daddr: 0x20b0a0a
- cur_udp_dst: 9 cur_udp_src: 9
+ queue_map_min: 0 queue_map_max: 0
+ dst_min: 192.168.81.2 dst_max:
+ src_min: src_max:
+ src_mac: 90:e2:ba:0a:56:b4 dst_mac: 00:1b:21:3c:9d:f8
+ udp_src_min: 9 udp_src_max: 109 udp_dst_min: 9 udp_dst_max: 9
+ src_mac_count: 0 dst_mac_count: 0
+ Flags: UDPSRC_RND NO_TIMESTAMP QUEUE_MAP_CPU
+ Current:
+ pkts-sofar: 100000 errors: 0
+ started: 623913381008us stopped: 623913396439us idle: 25us
+ seq_num: 100001 cur_dst_mac_offset: 0 cur_src_mac_offset: 0
+ cur_saddr: 192.168.8.3 cur_daddr: 192.168.81.2
+ cur_udp_dst: 9 cur_udp_src: 42
+ cur_queue_map: 0
flows: 0
-Result: OK: 13101142(c12220741+d880401) usec, 10000000 (60byte,0frags)
- 763292pps 390Mb/sec (390805504bps) errors: 39664
+ Result: OK: 15430(c15405+d25) usec, 100000 (60byte,0frags)
+ 6480562pps 3110Mb/sec (3110669760bps) errors: 0
-Configuring threads and devices
-================================
+
+Configuring devices
+===================
This is done via the /proc interface, and most easily done via pgset
as defined in the sample scripts.
@@ -126,7 +145,7 @@ Examples:
To select queue 1 of a given device,
use queue_map_min=1 and queue_map_max=1
- pgset "src_mac_count 1" Sets the number of MACs we'll range through.
+ pgset "src_mac_count 1" Sets the number of MACs we'll range through.
The 'minimum' MAC is what you set with srcmac.
pgset "dst_mac_count 1" Sets the number of MACs we'll range through.
@@ -145,6 +164,7 @@ Examples:
UDPCSUM,
IPSEC # IPsec encapsulation (needs CONFIG_XFRM)
NODE_ALLOC # node specific memory allocation
+ NO_TIMESTAMP # disable timestamping
pgset spi SPI_VALUE Set specific SA used to transform packet.
@@ -192,24 +212,43 @@ Examples:
pgset "rate 300M" set rate to 300 Mb/s
pgset "ratep 1000000" set rate to 1Mpps
+ pgset "xmit_mode netif_receive" RX inject into stack netif_receive_skb()
+ Works with "burst" but not with "clone_skb".
+ Default xmit_mode is "start_xmit".
+
Sample scripts
==============
-A collection of small tutorial scripts for pktgen is in the
-samples/pktgen directory:
+A collection of tutorial scripts and helpers for pktgen is in the
+samples/pktgen directory. The helper parameters.sh file support easy
+and consistant parameter parsing across the sample scripts.
+
+Usage example and help:
+ ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2
+
+Usage: ./pktgen_sample01_simple.sh [-vx] -i ethX
+ -i : ($DEV) output interface/device (required)
+ -s : ($PKT_SIZE) packet size
+ -d : ($DEST_IP) destination IP
+ -m : ($DST_MAC) destination MAC-addr
+ -t : ($THREADS) threads to start
+ -c : ($SKB_CLONE) SKB clones send before alloc new SKB
+ -b : ($BURST) HW level bursting of SKBs
+ -v : ($VERBOSE) verbose
+ -x : ($DEBUG) debug
+
+The global variables being set are also listed. E.g. the required
+interface/device parameter "-i" sets variable $DEV. Copy the
+pktgen_sampleXX scripts and modify them to fit your own needs.
+
+The old scripts:
-pktgen.conf-1-1 # 1 CPU 1 dev
pktgen.conf-1-2 # 1 CPU 2 dev
-pktgen.conf-2-1 # 2 CPU's 1 dev
-pktgen.conf-2-2 # 2 CPU's 2 dev
pktgen.conf-1-1-rdos # 1 CPU 1 dev w. route DoS
pktgen.conf-1-1-ip6 # 1 CPU 1 dev ipv6
pktgen.conf-1-1-ip6-rdos # 1 CPU 1 dev ipv6 w. route DoS
pktgen.conf-1-1-flows # 1 CPU 1 dev multiple flows.
-Run in shell: ./pktgen.conf-X-Y
-This does all the setup including sending.
-
Interrupt affinity
===================
@@ -217,6 +256,9 @@ Note that when adding devices to a specific CPU it is a good idea to
also assign /proc/irq/XX/smp_affinity so that the TX interrupts are bound
to the same CPU. This reduces cache bouncing when freeing skbs.
+Plus using the device flag QUEUE_MAP_CPU, which maps the SKBs TX queue
+to the running threads CPU (directly from smp_processor_id()).
+
Enable IPsec
============
Default IPsec transformation with ESP encapsulation plus transport mode
@@ -237,18 +279,19 @@ Current commands and configuration options
start
stop
+reset
** Thread commands:
add_device
rem_device_all
-max_before_softirq
** Device commands:
count
clone_skb
+burst
debug
frags
@@ -257,10 +300,17 @@ delay
src_mac_count
dst_mac_count
-pkt_size
+pkt_size
min_pkt_size
max_pkt_size
+queue_map_min
+queue_map_max
+skb_priority
+
+tos (ipv4)
+traffic_class (ipv6)
+
mpls
udp_src_min
@@ -269,6 +319,8 @@ udp_src_max
udp_dst_min
udp_dst_max
+node
+
flag
IPSRC_RND
IPDST_RND
@@ -287,6 +339,9 @@ flag
UDPCSUM
IPSEC
NODE_ALLOC
+ NO_TIMESTAMP
+
+spi (ipsec)
dst_min
dst_max
@@ -299,8 +354,10 @@ src_mac
clear_counters
-dst6
src6
+dst6
+dst6_max
+dst6_min
flows
flowlen
@@ -308,6 +365,17 @@ flowlen
rate
ratep
+xmit_mode <start_xmit|netif_receive>
+
+vlan_cfi
+vlan_id
+vlan_p
+
+svlan_cfi
+svlan_id
+svlan_p
+
+
References:
ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/
ftp://robur.slu.se/pub/Linux/net-development/pktgen-testing/examples/
diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt
index f981a9295a39..616f89267d23 100644
--- a/Documentation/networking/switchdev.txt
+++ b/Documentation/networking/switchdev.txt
@@ -1,59 +1,358 @@
-Switch (and switch-ish) device drivers HOWTO
-===========================
-
-Please note that the word "switch" is here used in very generic meaning.
-This include devices supporting L2/L3 but also various flow offloading chips,
-including switches embedded into SR-IOV NICs.
-
-Lets describe a topology a bit. Imagine the following example:
-
- +----------------------------+ +---------------+
- | SOME switch chip | | CPU |
- +----------------------------+ +---------------+
- port1 port2 port3 port4 MNGMNT | PCI-E |
- | | | | | +---------------+
- PHY PHY | | | | NIC0 NIC1
- | | | | | |
- | | +- PCI-E -+ | |
- | +------- MII -------+ |
- +------------- MII ------------+
-
-In this example, there are two independent lines between the switch silicon
-and CPU. NIC0 and NIC1 drivers are not aware of a switch presence. They are
-separate from the switch driver. SOME switch chip is by managed by a driver
-via PCI-E device MNGMNT. Note that MNGMNT device, NIC0 and NIC1 may be
-connected to some other type of bus.
-
-Now, for the previous example show the representation in kernel:
-
- +----------------------------+ +---------------+
- | SOME switch chip | | CPU |
- +----------------------------+ +---------------+
- sw0p0 sw0p1 sw0p2 sw0p3 MNGMNT | PCI-E |
- | | | | | +---------------+
- PHY PHY | | | | eth0 eth1
- | | | | | |
- | | +- PCI-E -+ | |
- | +------- MII -------+ |
- +------------- MII ------------+
-
-Lets call the example switch driver for SOME switch chip "SOMEswitch". This
-driver takes care of PCI-E device MNGMNT. There is a netdevice instance sw0pX
-created for each port of a switch. These netdevices are instances
-of "SOMEswitch" driver. sw0pX netdevices serve as a "representation"
-of the switch chip. eth0 and eth1 are instances of some other existing driver.
-
-The only difference of the switch-port netdevice from the ordinary netdevice
-is that is implements couple more NDOs:
-
- ndo_switch_parent_id_get - This returns the same ID for two port netdevices
- of the same physical switch chip. This is
- mandatory to be implemented by all switch drivers
- and serves the caller for recognition of a port
- netdevice.
- ndo_switch_parent_* - Functions that serve for a manipulation of the switch
- chip itself (it can be though of as a "parent" of the
- port, therefore the name). They are not port-specific.
- Caller might use arbitrary port netdevice of the same
- switch and it will make no difference.
- ndo_switch_port_* - Functions that serve for a port-specific manipulation.
+Ethernet switch device driver model (switchdev)
+===============================================
+Copyright (c) 2014 Jiri Pirko <jiri@resnulli.us>
+Copyright (c) 2014-2015 Scott Feldman <sfeldma@gmail.com>
+
+
+The Ethernet switch device driver model (switchdev) is an in-kernel driver
+model for switch devices which offload the forwarding (data) plane from the
+kernel.
+
+Figure 1 is a block diagram showing the components of the switchdev model for
+an example setup using a data-center-class switch ASIC chip. Other setups
+with SR-IOV or soft switches, such as OVS, are possible.
+
+
+                             User-space tools                                 
+                                                                              
+       user space                   |                                         
+      +-------------------------------------------------------------------+   
+       kernel                       | Netlink                                 
+                                    |                                         
+                     +--------------+-------------------------------+         
+                     |         Network stack                        |         
+                     |           (Linux)                            |         
+                     |                                              |         
+                     +----------------------------------------------+         
+                                                                              
+ sw1p2 sw1p4 sw1p6
+                      sw1p1  + sw1p3 +  sw1p5 +         eth1             
+                        +    |    +    |    +    |            +               
+                        |    |    |    |    |    |            |               
+                     +--+----+----+----+-+--+----+---+  +-----+-----+         
+                     |         Switch driver         |  |    mgmt   |         
+                     |        (this document)        |  |   driver  |         
+                     |                               |  |           |         
+                     +--------------+----------------+  +-----------+         
+                                    |                                         
+       kernel                       | HW bus (eg PCI)                         
+      +-------------------------------------------------------------------+   
+       hardware                     |                                         
+                     +--------------+---+------------+                        
+                     |         Switch device (sw1)   |                        
+                     |  +----+                       +--------+               
+                     |  |    v offloaded data path   | mgmt port              
+                     |  |    |                       |                        
+                     +--|----|----+----+----+----+---+                        
+                        |    |    |    |    |    |                            
+                        +    +    +    +    +    +                            
+                       p1   p2   p3   p4   p5   p6
+                                       
+                             front-panel ports                                
+                                                                              
+
+ Fig 1.
+
+
+Include Files
+-------------
+
+#include <linux/netdevice.h>
+#include <net/switchdev.h>
+
+
+Configuration
+-------------
+
+Use "depends NET_SWITCHDEV" in driver's Kconfig to ensure switchdev model
+support is built for driver.
+
+
+Switch Ports
+------------
+
+On switchdev driver initialization, the driver will allocate and register a
+struct net_device (using register_netdev()) for each enumerated physical switch
+port, called the port netdev. A port netdev is the software representation of
+the physical port and provides a conduit for control traffic to/from the
+controller (the kernel) and the network, as well as an anchor point for higher
+level constructs such as bridges, bonds, VLANs, tunnels, and L3 routers. Using
+standard netdev tools (iproute2, ethtool, etc), the port netdev can also
+provide to the user access to the physical properties of the switch port such
+as PHY link state and I/O statistics.
+
+There is (currently) no higher-level kernel object for the switch beyond the
+port netdevs. All of the switchdev driver ops are netdev ops or switchdev ops.
+
+A switch management port is outside the scope of the switchdev driver model.
+Typically, the management port is not participating in offloaded data plane and
+is loaded with a different driver, such as a NIC driver, on the management port
+device.
+
+Port Netdev Naming
+^^^^^^^^^^^^^^^^^^
+
+Udev rules should be used for port netdev naming, using some unique attribute
+of the port as a key, for example the port MAC address or the port PHYS name.
+Hard-coding of kernel netdev names within the driver is discouraged; let the
+kernel pick the default netdev name, and let udev set the final name based on a
+port attribute.
+
+Using port PHYS name (ndo_get_phys_port_name) for the key is particularly
+useful for dynamically-named ports where the device names its ports based on
+external configuration. For example, if a physical 40G port is split logically
+into 4 10G ports, resulting in 4 port netdevs, the device can give a unique
+name for each port using port PHYS name. The udev rule would be:
+
+SUBSYSTEM=="net", ACTION=="add", DRIVER="<driver>", ATTR{phys_port_name}!="", \
+ NAME="$attr{phys_port_name}"
+
+Suggested naming convention is "swXpYsZ", where X is the switch name or ID, Y
+is the port name or ID, and Z is the sub-port name or ID. For example, sw1p1s0
+would be sub-port 0 on port 1 on switch 1.
+
+Switch ID
+^^^^^^^^^
+
+The switchdev driver must implement the switchdev op switchdev_port_attr_get for
+SWITCHDEV_ATTR_PORT_PARENT_ID for each port netdev, returning the same physical ID
+for each port of a switch. The ID must be unique between switches on the same
+system. The ID does not need to be unique between switches on different
+systems.
+
+The switch ID is used to locate ports on a switch and to know if aggregated
+ports belong to the same switch.
+
+Port Features
+^^^^^^^^^^^^^
+
+NETIF_F_NETNS_LOCAL
+
+If the switchdev driver (and device) only supports offloading of the default
+network namespace (netns), the driver should set this feature flag to prevent
+the port netdev from being moved out of the default netns. A netns-aware
+driver/device would not set this flag and be responsible for partitioning
+hardware to preserve netns containment. This means hardware cannot forward
+traffic from a port in one namespace to another port in another namespace.
+
+Port Topology
+^^^^^^^^^^^^^
+
+The port netdevs representing the physical switch ports can be organized into
+higher-level switching constructs. The default construct is a standalone
+router port, used to offload L3 forwarding. Two or more ports can be bonded
+together to form a LAG. Two or more ports (or LAGs) can be bridged to bridge
+to L2 networks. VLANs can be applied to sub-divide L2 networks. L2-over-L3
+tunnels can be built on ports. These constructs are built using standard Linux
+tools such as the bridge driver, the bonding/team drivers, and netlink-based
+tools such as iproute2.
+
+The switchdev driver can know a particular port's position in the topology by
+monitoring NETDEV_CHANGEUPPER notifications. For example, a port moved into a
+bond will see it's upper master change. If that bond is moved into a bridge,
+the bond's upper master will change. And so on. The driver will track such
+movements to know what position a port is in in the overall topology by
+registering for netdevice events and acting on NETDEV_CHANGEUPPER.
+
+L2 Forwarding Offload
+---------------------
+
+The idea is to offload the L2 data forwarding (switching) path from the kernel
+to the switchdev device by mirroring bridge FDB entries down to the device. An
+FDB entry is the {port, MAC, VLAN} tuple forwarding destination.
+
+To offloading L2 bridging, the switchdev driver/device should support:
+
+ - Static FDB entries installed on a bridge port
+ - Notification of learned/forgotten src mac/vlans from device
+ - STP state changes on the port
+ - VLAN flooding of multicast/broadcast and unknown unicast packets
+
+Static FDB Entries
+^^^^^^^^^^^^^^^^^^
+
+The switchdev driver should implement ndo_fdb_add, ndo_fdb_del and ndo_fdb_dump
+to support static FDB entries installed to the device. Static bridge FDB
+entries are installed, for example, using iproute2 bridge cmd:
+
+ bridge fdb add ADDR dev DEV [vlan VID] [self]
+
+XXX: what should be done if offloading this rule to hardware fails (for
+example, due to full capacity in hardware tables) ?
+
+Note: by default, the bridge does not filter on VLAN and only bridges untagged
+traffic. To enable VLAN support, turn on VLAN filtering:
+
+ echo 1 >/sys/class/net/<bridge>/bridge/vlan_filtering
+
+Notification of Learned/Forgotten Source MAC/VLANs
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The switch device will learn/forget source MAC address/VLAN on ingress packets
+and notify the switch driver of the mac/vlan/port tuples. The switch driver,
+in turn, will notify the bridge driver using the switchdev notifier call:
+
+ err = call_switchdev_notifiers(val, dev, info);
+
+Where val is SWITCHDEV_FDB_ADD when learning and SWITCHDEV_FDB_DEL when forgetting, and
+info points to a struct switchdev_notifier_fdb_info. On SWITCHDEV_FDB_ADD, the bridge
+driver will install the FDB entry into the bridge's FDB and mark the entry as
+NTF_EXT_LEARNED. The iproute2 bridge command will label these entries
+"offload":
+
+ $ bridge fdb
+ 52:54:00:12:35:01 dev sw1p1 master br0 permanent
+ 00:02:00:00:02:00 dev sw1p1 master br0 offload
+ 00:02:00:00:02:00 dev sw1p1 self
+ 52:54:00:12:35:02 dev sw1p2 master br0 permanent
+ 00:02:00:00:03:00 dev sw1p2 master br0 offload
+ 00:02:00:00:03:00 dev sw1p2 self
+ 33:33:00:00:00:01 dev eth0 self permanent
+ 01:00:5e:00:00:01 dev eth0 self permanent
+ 33:33:ff:00:00:00 dev eth0 self permanent
+ 01:80:c2:00:00:0e dev eth0 self permanent
+ 33:33:00:00:00:01 dev br0 self permanent
+ 01:00:5e:00:00:01 dev br0 self permanent
+ 33:33:ff:12:35:01 dev br0 self permanent
+
+Learning on the port should be disabled on the bridge using the bridge command:
+
+ bridge link set dev DEV learning off
+
+Learning on the device port should be enabled, as well as learning_sync:
+
+ bridge link set dev DEV learning on self
+ bridge link set dev DEV learning_sync on self
+
+Learning_sync attribute enables syncing of the learned/forgotton FDB entry to
+the bridge's FDB. It's possible, but not optimal, to enable learning on the
+device port and on the bridge port, and disable learning_sync.
+
+To support learning and learning_sync port attributes, the driver implements
+switchdev op switchdev_port_attr_get/set for SWITCHDEV_ATTR_PORT_BRIDGE_FLAGS. The driver
+should initialize the attributes to the hardware defaults.
+
+FDB Ageing
+^^^^^^^^^^
+
+There are two FDB ageing models supported: 1) ageing by the device, and 2)
+ageing by the kernel. Ageing by the device is preferred if many FDB entries
+are supported. The driver calls call_switchdev_notifiers(SWITCHDEV_FDB_DEL, ...) to
+age out the FDB entry. In this model, ageing by the kernel should be turned
+off. XXX: how to turn off ageing in kernel on a per-port basis or otherwise
+prevent the kernel from ageing out the FDB entry?
+
+In the kernel ageing model, the standard bridge ageing mechanism is used to age
+out stale FDB entries. To keep an FDB entry "alive", the driver should refresh
+the FDB entry by calling call_switchdev_notifiers(SWITCHDEV_FDB_ADD, ...). The
+notification will reset the FDB entry's last-used time to now. The driver
+should rate limit refresh notifications, for example, no more than once a
+second. If the FDB entry expires, ndo_fdb_del is called to remove entry from
+the device. XXX: this last part isn't currently correct: ndo_fdb_del isn't
+called, so the stale entry remains in device...this need to get fixed.
+
+FDB Flush
+^^^^^^^^^
+
+XXX: Unimplemented. Need to support FDB flush by bridge driver for port and
+remove both static and learned FDB entries.
+
+STP State Change on Port
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+Internally or with a third-party STP protocol implementation (e.g. mstpd), the
+bridge driver maintains the STP state for ports, and will notify the switch
+driver of STP state change on a port using the switchdev op switchdev_attr_port_set for
+SWITCHDEV_ATTR_PORT_STP_UPDATE.
+
+State is one of BR_STATE_*. The switch driver can use STP state updates to
+update ingress packet filter list for the port. For example, if port is
+DISABLED, no packets should pass, but if port moves to BLOCKED, then STP BPDUs
+and other IEEE 01:80:c2:xx:xx:xx link-local multicast packets can pass.
+
+Note that STP BDPUs are untagged and STP state applies to all VLANs on the port
+so packet filters should be applied consistently across untagged and tagged
+VLANs on the port.
+
+Flooding L2 domain
+^^^^^^^^^^^^^^^^^^
+
+For a given L2 VLAN domain, the switch device should flood multicast/broadcast
+and unknown unicast packets to all ports in domain, if allowed by port's
+current STP state. The switch driver, knowing which ports are within which
+vlan L2 domain, can program the switch device for flooding. The packet should
+also be sent to the port netdev for processing by the bridge driver. The
+bridge should not reflood the packet to the same ports the device flooded.
+XXX: the mechanism to avoid duplicate flood packets is being discuseed.
+
+It is possible for the switch device to not handle flooding and push the
+packets up to the bridge driver for flooding. This is not ideal as the number
+of ports scale in the L2 domain as the device is much more efficient at
+flooding packets that software.
+
+IGMP Snooping
+^^^^^^^^^^^^^
+
+XXX: complete this section
+
+
+L3 routing
+----------
+
+Offloading L3 routing requires that device be programmed with FIB entries from
+the kernel, with the device doing the FIB lookup and forwarding. The device
+does a longest prefix match (LPM) on FIB entries matching route prefix and
+forwards the packet to the matching FIB entry's nexthop(s) egress ports. To
+program the device, the switchdev driver is called with add/delete ops for IPv4
+and IPv6 FIB entries. For IPv4, the driver implements switchdev ops:
+
+ int (*switchdev_fib_ipv4_add)(struct net_device *dev,
+ __be32 dst, int dst_len,
+ struct fib_info *fi,
+ u8 tos, u8 type,
+ u32 nlflags, u32 tb_id);
+
+ int (*switchdev_fib_ipv4_del)(struct net_device *dev,
+ __be32 dst, int dst_len,
+ struct fib_info *fi,
+ u8 tos, u8 type,
+ u32 tb_id);
+
+to add/delete IPv4 dst/dest_len prefix on table tb_id. The *fi structure holds
+details on the route and route's nexthops. *dev is one of the port netdevs
+mentioned in the routes next hop list. If the output port netdevs referenced
+in the route's nexthop list don't all have the same switch ID, the driver is
+not called to add/delete the FIB entry.
+
+Routes offloaded to the device are labeled with "offload" in the ip route
+listing:
+
+ $ ip route show
+ default via 192.168.0.2 dev eth0
+ 11.0.0.0/30 dev sw1p1 proto kernel scope link src 11.0.0.2 offload
+ 11.0.0.4/30 via 11.0.0.1 dev sw1p1 proto zebra metric 20 offload
+ 11.0.0.8/30 dev sw1p2 proto kernel scope link src 11.0.0.10 offload
+ 11.0.0.12/30 via 11.0.0.9 dev sw1p2 proto zebra metric 20 offload
+ 12.0.0.2 proto zebra metric 30 offload
+ nexthop via 11.0.0.1 dev sw1p1 weight 1
+ nexthop via 11.0.0.9 dev sw1p2 weight 1
+ 12.0.0.3 via 11.0.0.1 dev sw1p1 proto zebra metric 20 offload
+ 12.0.0.4 via 11.0.0.9 dev sw1p2 proto zebra metric 20 offload
+ 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.15
+
+XXX: add/del IPv6 FIB API
+
+Nexthop Resolution
+^^^^^^^^^^^^^^^^^^
+
+The FIB entry's nexthop list contains the nexthop tuple (gateway, dev), but for
+the switch device to forward the packet with the correct dst mac address, the
+nexthop gateways must be resolved to the neighbor's mac address. Neighbor mac
+address discovery comes via the ARP (or ND) process and is available via the
+arp_tbl neighbor table. To resolve the routes nexthop gateways, the driver
+should trigger the kernel's neighbor resolution process. See the rocker
+driver's rocker_port_ipv4_resolve() for an example.
+
+The driver can monitor for updates to arp_tbl using the netevent notifier
+NETEVENT_NEIGH_UPDATE. The device can be programmed with resolved nexthops
+for the routes as arp_tbl updates.
diff --git a/Documentation/networking/tc-actions-env-rules.txt b/Documentation/networking/tc-actions-env-rules.txt
index 70d6cf608251..f37814693ad3 100644
--- a/Documentation/networking/tc-actions-env-rules.txt
+++ b/Documentation/networking/tc-actions-env-rules.txt
@@ -8,14 +8,8 @@ For example if your action queues a packet to be processed later,
or intentionally branches by redirecting a packet, then you need to
clone the packet.
-There are certain fields in the skb tc_verd that need to be reset so we
-avoid loops, etc. A few are generic enough that skb_act_clone()
-resets them for you, so invoke skb_act_clone() rather than skb_clone().
-
2) If you munge any packet thou shalt call pskb_expand_head in the case
someone else is referencing the skb. After that you "own" the skb.
-You must also tell us if it is ok to munge the packet (TC_OK2MUNGE),
-this way any action downstream can stomp on the packet.
3) Dropping packets you don't own is a no-no. You simply return
TC_ACT_SHOT to the caller and they will drop it.
diff --git a/Documentation/powerpc/transactional_memory.txt b/Documentation/powerpc/transactional_memory.txt
index ba0a2a4a54ba..ded69794a5c0 100644
--- a/Documentation/powerpc/transactional_memory.txt
+++ b/Documentation/powerpc/transactional_memory.txt
@@ -74,23 +74,22 @@ Causes of transaction aborts
Syscalls
========
-Syscalls made from within an active transaction will not be performed and the
-transaction will be doomed by the kernel with the failure code TM_CAUSE_SYSCALL
-| TM_CAUSE_PERSISTENT.
+Performing syscalls from within transaction is not recommended, and can lead
+to unpredictable results.
-Syscalls made from within a suspended transaction are performed as normal and
-the transaction is not explicitly doomed by the kernel. However, what the
-kernel does to perform the syscall may result in the transaction being doomed
-by the hardware. The syscall is performed in suspended mode so any side
-effects will be persistent, independent of transaction success or failure. No
-guarantees are provided by the kernel about which syscalls will affect
-transaction success.
+Syscalls do not by design abort transactions, but beware: The kernel code will
+not be running in transactional state. The effect of syscalls will always
+remain visible, but depending on the call they may abort your transaction as a
+side-effect, read soon-to-be-aborted transactional data that should not remain
+invisible, etc. If you constantly retry a transaction that constantly aborts
+itself by calling a syscall, you'll have a livelock & make no progress.
-Care must be taken when relying on syscalls to abort during active transactions
-if the calls are made via a library. Libraries may cache values (which may
-give the appearance of success) or perform operations that cause transaction
-failure before entering the kernel (which may produce different failure codes).
-Examples are glibc's getpid() and lazy symbol resolution.
+Simple syscalls (e.g. sigprocmask()) "could" be OK. Even things like write()
+from, say, printf() should be OK as long as the kernel does not access any
+memory that was accessed transactionally.
+
+Consider any syscalls that happen to work as debug-only -- not recommended for
+production use. Best to queue them up till after the transaction is over.
Signals
@@ -177,7 +176,8 @@ kernel aborted a transaction:
TM_CAUSE_RESCHED Thread was rescheduled.
TM_CAUSE_TLBI Software TLB invalid.
TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap.
- TM_CAUSE_SYSCALL Syscall from active transaction.
+ TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort
+ transactions for consistency will use this.
TM_CAUSE_SIGNAL Signal delivered.
TM_CAUSE_MISC Currently unused.
TM_CAUSE_ALIGNMENT Alignment fault.
diff --git a/Documentation/s390/qeth.txt b/Documentation/s390/qeth.txt
index 74122ada9949..aa06fcf5f8c2 100644
--- a/Documentation/s390/qeth.txt
+++ b/Documentation/s390/qeth.txt
@@ -1,6 +1,6 @@
IBM s390 QDIO Ethernet Driver
-HiperSockets Bridge Port Support
+OSA and HiperSockets Bridge Port Support
Uevents
@@ -8,7 +8,7 @@ To generate the events the device must be assigned a role of either
a primary or a secondary Bridge Port. For more information, see
"z/VM Connectivity, SC24-6174".
-When run on HiperSockets Bridge Capable Port hardware, and the state
+When run on an OSA or HiperSockets Bridge Capable Port hardware, and the state
of some configured Bridge Port device on the channel changes, a udev
event with ACTION=CHANGE is emitted on behalf of the corresponding
ccwgroup device. The event has the following attributes:
diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt
index 1e52d67d0abf..dbe6623fed1c 100644
--- a/Documentation/serial/tty.txt
+++ b/Documentation/serial/tty.txt
@@ -198,6 +198,9 @@ TTY_IO_ERROR If set, causes all subsequent userspace read/write
TTY_OTHER_CLOSED Device is a pty and the other side has closed.
+TTY_OTHER_DONE Device is a pty and the other side has closed and
+ all pending input processing has been completed.
+
TTY_NO_WRITE_SPLIT Prevent driver from splitting up writes into
smaller chunks.
diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt
index 53838d9c6295..c59bd9bc41ef 100644
--- a/Documentation/virtual/kvm/mmu.txt
+++ b/Documentation/virtual/kvm/mmu.txt
@@ -169,6 +169,10 @@ Shadow pages contain the following information:
Contains the value of cr4.smep && !cr0.wp for which the page is valid
(pages for which this is true are different from other pages; see the
treatment of cr0.wp=0 below).
+ role.smap_andnot_wp:
+ Contains the value of cr4.smap && !cr0.wp for which the page is valid
+ (pages for which this is true are different from other pages; see the
+ treatment of cr0.wp=0 below).
gfn:
Either the guest page table containing the translations shadowed by this
page, or the base page frame for linear translations. See role.direct.
@@ -344,10 +348,16 @@ on fault type:
(user write faults generate a #PF)
-In the first case there is an additional complication if CR4.SMEP is
-enabled: since we've turned the page into a kernel page, the kernel may now
-execute it. We handle this by also setting spte.nx. If we get a user
-fetch or read fault, we'll change spte.u=1 and spte.nx=gpte.nx back.
+In the first case there are two additional complications:
+- if CR4.SMEP is enabled: since we've turned the page into a kernel page,
+ the kernel may now execute it. We handle this by also setting spte.nx.
+ If we get a user fetch or read fault, we'll change spte.u=1 and
+ spte.nx=gpte.nx back.
+- if CR4.SMAP is disabled: since the page has been changed to a kernel
+ page, it can not be reused when CR4.SMAP is enabled. We set
+ CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note,
+ here we do not care the case that CR4.SMAP is enabled since KVM will
+ directly inject #PF to guest due to failed permission check.
To prevent an spte that was converted into a kernel page with cr0.wp=0
from being written by the kernel after cr0.wp has changed to 1, we make
diff --git a/MAINTAINERS b/MAINTAINERS
index 2e5bbc0d68b2..df106f87a3ba 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -652,7 +652,6 @@ M: Tom Lendacky <thomas.lendacky@amd.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/amd/xgbe/
-F: drivers/net/phy/amd-xgbe-phy.c
AMS (Apple Motion Sensor) DRIVER
M: Michael Hanselmann <linux-kernel@hansmi.ch>
@@ -892,11 +891,10 @@ S: Maintained
F: arch/arm/mach-alpine/
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
-M: Andrew Victor <linux@maxim.org.za>
M: Nicolas Ferre <nicolas.ferre@atmel.com>
+M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://maxim.org.za/at91_26.html
W: http://www.linux4sam.org
S: Supported
F: arch/arm/mach-at91/
@@ -975,7 +973,7 @@ S: Maintained
ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
M: Hans Ulli Kroll <ulli.kroll@googlemail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-T: git git://git.berlios.de/gemini-board
+T: git git://github.com/ulli-kroll/linux.git
S: Maintained
F: arch/arm/mach-gemini/
@@ -990,6 +988,12 @@ F: drivers/clocksource/timer-prima2.c
F: drivers/clocksource/timer-atlas7.c
N: [^a-z]sirf
+ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
+M: Baruch Siach <baruch@tkos.co.il>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+N: digicolor
+
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1188,7 +1192,7 @@ ARM/MAGICIAN MACHINE SUPPORT
M: Philipp Zabel <philipp.zabel@gmail.com>
S: Maintained
-ARM/Marvell Armada 370 and Armada XP SOC support
+ARM/Marvell Kirkwood and Armada 370, 375, 38x, XP SOC support
M: Jason Cooper <jason@lakedaemon.net>
M: Andrew Lunn <andrew@lunn.ch>
M: Gregory Clement <gregory.clement@free-electrons.com>
@@ -1197,12 +1201,17 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-mvebu/
F: drivers/rtc/rtc-armada38x.c
+F: arch/arm/boot/dts/armada*
+F: arch/arm/boot/dts/kirkwood*
+
ARM/Marvell Berlin SoC support
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-berlin/
+F: arch/arm/boot/dts/berlin*
+
ARM/Marvell Dove/MV78xx0/Orion SOC support
M: Jason Cooper <jason@lakedaemon.net>
@@ -1215,6 +1224,9 @@ F: arch/arm/mach-dove/
F: arch/arm/mach-mv78xx0/
F: arch/arm/mach-orion5x/
F: arch/arm/plat-orion/
+F: arch/arm/boot/dts/dove*
+F: arch/arm/boot/dts/orion5x*
+
ARM/Orion SoC/Technologic Systems TS-78xx platform support
M: Alexander Clouter <alex@digriz.org.uk>
@@ -1366,6 +1378,7 @@ N: rockchip
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
+M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
@@ -1439,9 +1452,10 @@ ARM/SOCFPGA ARCHITECTURE
M: Dinh Nguyen <dinguyen@opensource.altera.com>
S: Maintained
F: arch/arm/mach-socfpga/
+F: arch/arm/boot/dts/socfpga*
+F: arch/arm/configs/socfpga_defconfig
W: http://www.rocketboards.org
-T: git://git.rocketboards.org/linux-socfpga.git
-T: git://git.rocketboards.org/linux-socfpga-next.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
M: Dinh Nguyen <dinguyen@opensource.altera.com>
@@ -1929,7 +1943,7 @@ S: Maintained
F: drivers/net/wireless/b43legacy/
BACKLIGHT CLASS/SUBSYSTEM
-M: Jingoo Han <jg1.han@samsung.com>
+M: Jingoo Han <jingoohan1@gmail.com>
M: Lee Jones <lee.jones@linaro.org>
S: Maintained
F: drivers/video/backlight/
@@ -2116,8 +2130,9 @@ S: Supported
F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M: Christian Daudt <bcm@fixthebug.org>
M: Florian Fainelli <f.fainelli@gmail.com>
+M: Ray Jui <rjui@broadcom.com>
+M: Scott Branden <sbranden@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
S: Maintained
@@ -2168,7 +2183,6 @@ S: Maintained
F: drivers/usb/gadget/udc/bcm63xx_udc.*
BROADCOM BCM7XXX ARM ARCHITECTURE
-M: Marc Carino <marc.ceeeee@gmail.com>
M: Brian Norris <computersforpeace@gmail.com>
M: Gregory Fong <gregory.0xf0@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
@@ -3413,6 +3427,13 @@ F: drivers/gpu/drm/rcar-du/
F: drivers/gpu/drm/shmobile/
F: include/linux/platform_data/shmob_drm.h
+DRM DRIVERS FOR ROCKCHIP
+M: Mark Yao <mark.yao@rock-chips.com>
+L: dri-devel@lists.freedesktop.org
+S: Maintained
+F: drivers/gpu/drm/rockchip/
+F: Documentation/devicetree/bindings/video/rockchip*
+
DSBR100 USB FM RADIO DRIVER
M: Alexey Klimov <klimov.linux@gmail.com>
L: linux-media@vger.kernel.org
@@ -3905,7 +3926,7 @@ F: drivers/extcon/
F: Documentation/extcon/
EXYNOS DP DRIVER
-M: Jingoo Han <jg1.han@samsung.com>
+M: Jingoo Han <jingoohan1@gmail.com>
L: dri-devel@lists.freedesktop.org
S: Maintained
F: drivers/gpu/drm/exynos/exynos_dp*
@@ -4364,11 +4385,10 @@ F: fs/gfs2/
F: include/uapi/linux/gfs2_ondisk.h
GIGASET ISDN DRIVERS
-M: Hansjoerg Lipp <hjlipp@web.de>
-M: Tilman Schmidt <tilman@imap.cc>
+M: Paul Bolle <pebolle@tiscali.nl>
L: gigaset307x-common@lists.sourceforge.net
W: http://gigaset307x.sourceforge.net/
-S: Maintained
+S: Odd Fixes
F: Documentation/isdn/README.gigaset
F: drivers/isdn/gigaset/
F: include/uapi/linux/gigaset_dev.h
@@ -4515,7 +4535,7 @@ M: Jean Delvare <jdelvare@suse.de>
M: Guenter Roeck <linux@roeck-us.net>
L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.org/
-T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/
+T: quilt http://jdelvare.nerim.net/devel/linux/jdelvare-hwmon/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
S: Maintained
F: Documentation/hwmon/
@@ -5035,17 +5055,19 @@ S: Orphan
F: drivers/video/fbdev/imsttfb.c
INFINIBAND SUBSYSTEM
-M: Roland Dreier <roland@kernel.org>
+M: Doug Ledford <dledford@redhat.com>
M: Sean Hefty <sean.hefty@intel.com>
M: Hal Rosenstock <hal.rosenstock@gmail.com>
L: linux-rdma@vger.kernel.org
W: http://www.openfabrics.org/
Q: http://patchwork.kernel.org/project/linux-rdma/list/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma.git
S: Supported
F: Documentation/infiniband/
F: drivers/infiniband/
F: include/uapi/linux/if_infiniband.h
+F: include/uapi/rdma/
+F: include/rdma/
INOTIFY
M: John McCutchan <john@johnmccutchan.com>
@@ -5798,6 +5820,7 @@ F: drivers/scsi/53c700*
LED SUBSYSTEM
M: Bryan Wu <cooloney@gmail.com>
M: Richard Purdie <rpurdie@rpsys.net>
+M: Jacek Anaszewski <j.anaszewski@samsung.com>
L: linux-leds@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds.git
S: Maintained
@@ -6943,6 +6966,17 @@ T: git git://git.rocketboards.org/linux-socfpga-next.git
S: Maintained
F: arch/nios2/
+NOKIA N900 POWER SUPPLY DRIVERS
+M: Pali Rohár <pali.rohar@gmail.com>
+S: Maintained
+F: include/linux/power/bq2415x_charger.h
+F: include/linux/power/bq27x00_battery.h
+F: include/linux/power/isp1704_charger.h
+F: drivers/power/bq2415x_charger.c
+F: drivers/power/bq27x00_battery.c
+F: drivers/power/isp1704_charger.c
+F: drivers/power/rx51_battery.c
+
NTB DRIVER
M: Jon Mason <jdmason@kudzu.us>
M: Dave Jiang <dave.jiang@intel.com>
@@ -7531,7 +7565,7 @@ S: Maintained
F: drivers/pci/host/*rcar*
PCI DRIVER FOR SAMSUNG EXYNOS
-M: Jingoo Han <jg1.han@samsung.com>
+M: Jingoo Han <jingoohan1@gmail.com>
L: linux-pci@vger.kernel.org
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@@ -7539,7 +7573,7 @@ S: Maintained
F: drivers/pci/host/pci-exynos.c
PCI DRIVER FOR SYNOPSIS DESIGNWARE
-M: Jingoo Han <jg1.han@samsung.com>
+M: Jingoo Han <jingoohan1@gmail.com>
L: linux-pci@vger.kernel.org
S: Maintained
F: drivers/pci/host/*designware*
@@ -8495,7 +8529,7 @@ S: Supported
F: sound/soc/samsung/
SAMSUNG FRAMEBUFFER DRIVER
-M: Jingoo Han <jg1.han@samsung.com>
+M: Jingoo Han <jingoohan1@gmail.com>
L: linux-fbdev@vger.kernel.org
S: Maintained
F: drivers/video/fbdev/s3c-fb.c
@@ -8800,10 +8834,11 @@ W: http://www.emulex.com
S: Supported
F: drivers/scsi/be2iscsi/
-SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-M: Sathya Perla <sathya.perla@emulex.com>
-M: Subbu Seetharaman <subbu.seetharaman@emulex.com>
-M: Ajit Khaparde <ajit.khaparde@emulex.com>
+Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
+M: Sathya Perla <sathya.perla@avagotech.com>
+M: Ajit Khaparde <ajit.khaparde@avagotech.com>
+M: Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
+M: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
L: netdev@vger.kernel.org
W: http://www.emulex.com
S: Supported
@@ -10523,7 +10558,6 @@ F: include/linux/virtio_console.h
F: include/uapi/linux/virtio_console.h
VIRTIO CORE, NET AND BLOCK DRIVERS
-M: Rusty Russell <rusty@rustcorp.com.au>
M: "Michael S. Tsirkin" <mst@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
@@ -11031,6 +11065,7 @@ F: drivers/media/pci/zoran/
ZRAM COMPRESSED RAM BLOCK DEVICE DRVIER
M: Minchan Kim <minchan@kernel.org>
M: Nitin Gupta <ngupta@vflare.org>
+R: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/block/zram/
diff --git a/Makefile b/Makefile
index 7ff1239f9cd2..dc20bcb9b271 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 1
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
NAME = Hurr durr I'ma sheep
# *DOCUMENTATION*
diff --git a/arch/arc/Kconfig.debug b/arch/arc/Kconfig.debug
index a7fc0da25650..ff6a4b5ce927 100644
--- a/arch/arc/Kconfig.debug
+++ b/arch/arc/Kconfig.debug
@@ -2,19 +2,6 @@ menu "Kernel hacking"
source "lib/Kconfig.debug"
-config EARLY_PRINTK
- bool "Early printk" if EMBEDDED
- default y
- help
- Write kernel log output directly into the VGA buffer or to a serial
- port.
-
- This is useful for kernel debugging when your machine crashes very
- early before the console code is initialized. For normal operation
- it is not recommended because it looks ugly and doesn't cooperate
- with klogd/syslogd or the X server. You should normally N here,
- unless you want to debug such a crash.
-
config 16KSTACKS
bool "Use 16Kb for kernel stacks instead of 8Kb"
help
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 067551b6920a..9917a45fc430 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -99,7 +99,7 @@ static inline void atomic_##op(int i, atomic_t *v) \
atomic_ops_unlock(flags); \
}
-#define ATOMIC_OP_RETURN(op, c_op) \
+#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
static inline int atomic_##op##_return(int i, atomic_t *v) \
{ \
unsigned long flags; \
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 8c3a3e02ba92..12b2100db073 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -266,7 +266,7 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
* Machine specific helpers for Entire D-Cache or Per Line ops
*/
-static unsigned int __before_dc_op(const int op)
+static inline unsigned int __before_dc_op(const int op)
{
unsigned int reg = reg;
@@ -284,7 +284,7 @@ static unsigned int __before_dc_op(const int op)
return reg;
}
-static void __after_dc_op(const int op, unsigned int reg)
+static inline void __after_dc_op(const int op, unsigned int reg)
{
if (op & OP_FLUSH) /* flush / flush-n-inv both wait */
while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS);
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 8ae29c955c11..c17097d2c167 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -49,7 +49,7 @@
pinctrl-0 = <&matrix_keypad_pins>;
debounce-delay-ms = <5>;
- col-scan-delay-us = <1500>;
+ col-scan-delay-us = <5>;
row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
&gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
@@ -473,7 +473,7 @@
interrupt-parent = <&gpio0>;
interrupts = <31 0>;
- wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <480>;
touchscreen-size-y = <272>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 15f198e4864d..7128fad991ac 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -18,6 +18,7 @@
aliases {
rtc0 = &mcp_rtc;
rtc1 = &tps659038_rtc;
+ rtc2 = &rtc;
};
memory {
@@ -83,7 +84,7 @@
gpio_fan: gpio_fan {
/* Based on 5v 500mA AFB02505HHB */
compatible = "gpio-fan";
- gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
#cooling-cells = <2>;
@@ -130,8 +131,8 @@
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
- 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
- 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+ 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+ 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
>;
};
@@ -455,7 +456,7 @@
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
+ interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;
@@ -478,7 +479,7 @@
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
- <&dra7_pmx_core 0x248>;
+ <&dra7_pmx_core 0x3f8>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_default>;
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index c675257f2377..f076ff856d8b 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -69,7 +69,7 @@
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <2000000000>;
+ clock-frequency = <1000000000>;
};
/* 25 MHz reference crystal */
refclk: oscillator {
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index ed2dd8ba4080..218a2acd36e5 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -585,7 +585,7 @@
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <2000000000>;
+ clock-frequency = <1000000000>;
};
/* 25 MHz reference crystal */
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index 0e85fc15ceda..ecd1318109ba 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -502,7 +502,7 @@
mainpll: mainpll {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <2000000000>;
+ clock-frequency = <1000000000>;
};
};
};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index e3b08fb959e5..990e8a2100f0 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -105,6 +105,10 @@
};
internal-regs {
+ rtc@10300 {
+ /* No crystal connected to the internal RTC */
+ status = "disabled";
+ };
serial@12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index aae7efc09b0b..e6fa251e17b9 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -87,6 +87,7 @@
/* connect xtal input to 25MHz reference */
clocks = <&ref25>;
+ clock-names = "xtal";
/* connect xtal input as source of pll0 and pll1 */
silabs,pll-source = <0 0>, <1 0>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5332b57b4950..f03a091cd076 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -911,7 +911,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
- <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+ <0x4ae06014 0x4>, <0x4a003b20 0xc>,
<0x4ae0c158 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -944,7 +944,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
- <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+ <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
<0x4a002470 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -977,7 +977,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
- <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+ <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
<0x4a00246c 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -1010,7 +1010,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
- <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+ <0x4ae06010 0x4>, <0x4a003b08 0xc>,
<0x4ae0c154 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -1203,7 +1203,7 @@
status = "disabled";
};
- rtc@48838000 {
+ rtc: rtc@48838000 {
compatible = "ti,am3352-rtc";
reg = <0x48838000 0x100>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 8de12af7c276..d6b49e5b32e9 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -9,6 +9,7 @@
#include <dt-bindings/sound/samsung-i2s.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/maxim,max77686.h>
#include "exynos4412.dtsi"
/ {
@@ -105,6 +106,8 @@
rtc@10070000 {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
};
g2d@10800000 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 2657e842e5a5..1eca97ee4bd6 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -567,6 +567,7 @@
num-slots = <1>;
broken-cd;
cap-sdio-irq;
+ keep-power-in-suspend;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 0788d08fb43e..146e71118a72 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -711,6 +711,7 @@
num-slots = <1>;
broken-cd;
cap-sdio-irq;
+ keep-power-in-suspend;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <1>;
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
index 5d31fc140823..2180a0152c9b 100644
--- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -28,7 +28,7 @@ trips {
type = "active";
};
cpu-crit-0 {
- temperature = <1200000>; /* millicelsius */
+ temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index f67b23f303c3..45317538bbae 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -536,6 +536,7 @@
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
+ power-domains = <&disp_pd>;
};
mipi_phy: video-phy@10040714 {
diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
index 48adfa8f4300..356e963edf11 100644
--- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi
+++ b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
@@ -18,7 +18,7 @@ trips {
type = "active";
};
cpu-crit-0 {
- temperature = <1050000>; /* millicelsius */
+ temperature = <105000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 412f41d62686..02eb8b15374f 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -674,6 +674,7 @@
num-slots = <1>;
broken-cd;
cap-sdio-irq;
+ keep-power-in-suspend;
card-detect-delay = <200>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <1>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 7e6eef2488e8..82045398bf1f 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -12,6 +12,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx23.dtsi"
/ {
@@ -93,6 +94,7 @@
ahb@80080000 {
usb0: usb@80080000 {
+ dr_mode = "host";
vbus-supply = <&reg_usb0_vbus>;
status = "okay";
};
@@ -122,7 +124,7 @@
user {
label = "green";
- gpios = <&gpio2 1 1>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index e4d3aecc4ed2..677f81d9dcd5 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -428,6 +428,7 @@
pwm4: pwm@53fc8000 {
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
reg = <0x53fc8000 0x4000>;
clocks = <&clks 108>, <&clks 52>;
clock-names = "ipg", "per";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 25e25f82fbae..4e073e854742 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -913,7 +913,7 @@
80 81 68 69
70 71 72 73
74 75 76 77>;
- interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
"saif0", "saif1", "i2c0", "i2c1",
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 19cc269a08d4..1ce6133b67f5 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -31,6 +31,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 15 0>;
+ enable-active-high;
};
reg_usb_h1_vbus: regulator@1 {
@@ -40,6 +41,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 0 0>;
+ enable-active-high;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 46b2fed7c319..3b24b12651b2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -185,7 +185,6 @@
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
- pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
status = "okay";
max7310_a: gpio@30 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index a29315833ecd..5c16145920ea 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -498,6 +498,8 @@
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <1>;
};
tlv320aic3x_aux: tlv320aic3x@19 {
@@ -509,6 +511,8 @@
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <2>;
};
tsl2563: tsl2563@29 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index d18a90f5eca3..69a40cfc1f29 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -456,6 +456,7 @@
};
mmu_isp: mmu@480bd400 {
+ #iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x480bd400 0x80>;
interrupts = <24>;
@@ -464,6 +465,7 @@
};
mmu_iva: mmu@5d000000 {
+ #iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x5d000000 0x80>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index efe5f737f39b..7d24ae0306b5 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -128,7 +128,7 @@
* hierarchy.
*/
ocp {
- compatible = "ti,omap4-l3-noc", "simple-bus";
+ compatible = "ti,omap5-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 74c3212f1f11..824ddab9c3ad 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -545,7 +545,7 @@
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio3>;
- interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index bfd3f1c734b8..2201cd5da3bb 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1017,23 +1017,6 @@
status = "disabled";
};
- vmmci: regulator-gpio {
- compatible = "regulator-gpio";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2900000>;
- regulator-name = "mmci-reg";
- regulator-type = "voltage";
-
- startup-delay-us = <100>;
- enable-active-high;
-
- states = <1800000 0x1
- 2900000 0x0>;
-
- status = "disabled";
- };
-
mcde@a0350000 {
compatible = "stericsson,mcde";
reg = <0xa0350000 0x1000>, /* MCDE */
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index bf8f0eddc2c0..744c1e3a744d 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -111,6 +111,21 @@
pinctrl-1 = <&i2c3_sleep_mode>;
};
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+ enable-active-high;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+ };
+
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 206826a855c0..1bc84ebdccaa 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -146,8 +146,21 @@
};
vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
gpios = <&gpio7 4 0x4>;
enable-gpio = <&gpio6 25 0x4>;
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+ enable-active-high;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
};
// External Micro SD slot
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index cf01c818b8ea..13cc7ca5e031 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -826,7 +826,7 @@
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 59>, <&tegra_car 22>;
+ resets = <&tegra_car 22>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
@@ -838,6 +838,7 @@
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
+ nvidia,has-utmi-pad-registers;
status = "disabled";
};
@@ -862,7 +863,7 @@
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 22>, <&tegra_car 22>;
+ resets = <&tegra_car 58>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
@@ -874,7 +875,6 @@
nvidia,hssquelch-level = <2>;
nvidia,hsdiscon-level = <5>;
nvidia,xcvr-hsslew = <12>;
- nvidia,has-utmi-pad-registers;
status = "disabled";
};
@@ -899,7 +899,7 @@
<&tegra_car TEGRA124_CLK_PLL_U>,
<&tegra_car TEGRA124_CLK_USBD>;
clock-names = "reg", "pll_u", "utmi-pads";
- resets = <&tegra_car 58>, <&tegra_car 22>;
+ resets = <&tegra_car 59>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
nvidia,hssync-start-delay = <0>;
nvidia,idle-wait-delay = <17>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 7a2aeacd62c0..107395c32d82 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -191,6 +191,7 @@
compatible = "arm,cortex-a15-pmu";
interrupts = <0 68 4>,
<0 69 4>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
};
oscclk6a: oscclk6a {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 23662b5a5e9d..d949facba376 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -33,28 +33,28 @@
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ A9_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
next-level-cache = <&L2>;
};
- cpu@1 {
+ A9_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
};
- cpu@2 {
+ A9_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
};
- cpu@3 {
+ A9_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
@@ -170,6 +170,7 @@
compatible = "arm,pl310-cache";
reg = <0x1e00a000 0x1000>;
interrupts = <0 43 4>;
+ cache-unified;
cache-level = <2>;
arm,data-latency = <1 1 1>;
arm,tag-latency = <1 1 1>;
@@ -181,6 +182,8 @@
<0 61 4>,
<0 62 4>,
<0 63 4>;
+ interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+
};
dcc {
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index a5cd2eda3edf..9ea54b3dba09 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -193,7 +193,7 @@
};
gem0: ethernet@e000b000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynq-gem";
reg = <0xe000b000 0x1000>;
status = "disabled";
interrupts = <0 22 4>;
@@ -204,7 +204,7 @@
};
gem1: ethernet@e000c000 {
- compatible = "cdns,gem";
+ compatible = "cdns,zynq-gem";
reg = <0xe000c000 0x1000>;
status = "disabled";
interrupts = <0 45 4>;
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ab86655c1f4b..0ca4a3eaf65d 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -39,11 +39,14 @@ CONFIG_ARCH_HIP04=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
CONFIG_SOC_VF610=y
+CONFIG_SOC_LS1021A=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 9ff7b54b2a83..3743ca221d40 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXTCON=m
-CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_PALMAS=m
CONFIG_TI_EMIF=m
CONFIG_PWM=y
diff --git a/arch/arm/include/asm/dma-iommu.h b/arch/arm/include/asm/dma-iommu.h
index 8e3fcb924db6..2ef282f96651 100644
--- a/arch/arm/include/asm/dma-iommu.h
+++ b/arch/arm/include/asm/dma-iommu.h
@@ -25,7 +25,7 @@ struct dma_iommu_mapping {
};
struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size);
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size);
void arm_iommu_release_mapping(struct dma_iommu_mapping *mapping);
diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
index 2f7e6ff67d51..0b579b2f4e0e 100644
--- a/arch/arm/include/asm/xen/page.h
+++ b/arch/arm/include/asm/xen/page.h
@@ -110,5 +110,6 @@ static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn)
bool xen_arch_need_swiotlb(struct device *dev,
unsigned long pfn,
unsigned long mfn);
+unsigned long xen_get_swiotlb_free_pages(unsigned int order);
#endif /* _ASM_ARM_XEN_PAGE_H */
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
index 91c7ba182dcd..213919ba326f 100644
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -303,12 +303,17 @@ static int probe_current_pmu(struct arm_pmu *pmu)
static int of_pmu_irq_cfg(struct platform_device *pdev)
{
- int i;
+ int i, irq;
int *irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
if (!irqs)
return -ENOMEM;
+ /* Don't bother with PPIs; they're already affine */
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0 && irq_is_percpu(irq))
+ return 0;
+
for (i = 0; i < pdev->num_resources; ++i) {
struct device_node *dn;
int cpu;
@@ -317,7 +322,7 @@ static int of_pmu_irq_cfg(struct platform_device *pdev)
i);
if (!dn) {
pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
- of_node_full_name(dn), i);
+ of_node_full_name(pdev->dev.of_node), i);
break;
}
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index acd5b560b728..5f5cd562c593 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -159,6 +159,8 @@ extern void exynos_enter_aftr(void);
extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
+extern void exynos_set_delayed_reset_assertion(bool enable);
+
extern void s5p_init_cpu(void __iomem *cpuid_addr);
extern unsigned int samsung_rev(void);
extern void __iomem *cpu_boot_reg_base(void);
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index bcde0dd668df..5917a30eee33 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -167,6 +167,33 @@ static void __init exynos_init_io(void)
}
/*
+ * Set or clear the USE_DELAYED_RESET_ASSERTION option. Used by smp code
+ * and suspend.
+ *
+ * This is necessary only on Exynos4 SoCs. When system is running
+ * USE_DELAYED_RESET_ASSERTION should be set so the ARM CLK clock down
+ * feature could properly detect global idle state when secondary CPU is
+ * powered down.
+ *
+ * However this should not be set when such system is going into suspend.
+ */
+void exynos_set_delayed_reset_assertion(bool enable)
+{
+ if (of_machine_is_compatible("samsung,exynos4")) {
+ unsigned int tmp, core_id;
+
+ for (core_id = 0; core_id < num_possible_cpus(); core_id++) {
+ tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
+ if (enable)
+ tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
+ else
+ tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
+ pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
+ }
+ }
+}
+
+/*
* Apparently, these SoCs are not able to wake-up from suspend using
* the PMU. Too bad. Should they suddenly become capable of such a
* feat, the matches below should be moved to suspend.c.
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index ebd135bb0995..a825bca2a2b6 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -34,30 +34,6 @@
extern void exynos4_secondary_startup(void);
-/*
- * Set or clear the USE_DELAYED_RESET_ASSERTION option, set on Exynos4 SoCs
- * during hot-(un)plugging CPUx.
- *
- * The feature can be cleared safely during first boot of secondary CPU.
- *
- * Exynos4 SoCs require setting USE_DELAYED_RESET_ASSERTION during powering
- * down a CPU so the CPU idle clock down feature could properly detect global
- * idle state when CPUx is off.
- */
-static void exynos_set_delayed_reset_assertion(u32 core_id, bool enable)
-{
- if (soc_is_exynos4()) {
- unsigned int tmp;
-
- tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
- if (enable)
- tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
- else
- tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
- pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
- }
-}
-
#ifdef CONFIG_HOTPLUG_CPU
static inline void cpu_leave_lowpower(u32 core_id)
{
@@ -73,8 +49,6 @@ static inline void cpu_leave_lowpower(u32 core_id)
: "=&r" (v)
: "Ir" (CR_C), "Ir" (0x40)
: "cc");
-
- exynos_set_delayed_reset_assertion(core_id, false);
}
static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
@@ -87,14 +61,6 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
/* Turn the CPU off on next WFI instruction. */
exynos_cpu_power_down(core_id);
- /*
- * Exynos4 SoCs require setting
- * USE_DELAYED_RESET_ASSERTION so the CPU idle
- * clock down feature could properly detect
- * global idle state when CPUx is off.
- */
- exynos_set_delayed_reset_assertion(core_id, true);
-
wfi();
if (pen_release == core_id) {
@@ -371,9 +337,6 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle)
udelay(10);
}
- /* No harm if this is called during first boot of secondary CPU */
- exynos_set_delayed_reset_assertion(core_id, false);
-
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
@@ -420,6 +383,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
exynos_sysram_init();
+ exynos_set_delayed_reset_assertion(true);
+
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
scu_enable(scu_base_addr());
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index cbe56b35aea0..a9686535f9ed 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -188,7 +188,7 @@ no_clk:
args.np = np;
args.args_count = 0;
child_domain = of_genpd_get_from_provider(&args);
- if (!child_domain)
+ if (IS_ERR(child_domain))
continue;
if (of_parse_phandle_with_args(np, "power-domains",
@@ -196,7 +196,7 @@ no_clk:
continue;
parent_domain = of_genpd_get_from_provider(&args);
- if (!parent_domain)
+ if (IS_ERR(parent_domain))
continue;
if (pm_genpd_add_subdomain(parent_domain, child_domain))
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 3e6aea7f83af..c0b6dccbf7bd 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -342,6 +342,8 @@ static void exynos_pm_enter_sleep_mode(void)
static void exynos_pm_prepare(void)
{
+ exynos_set_delayed_reset_assertion(false);
+
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
@@ -482,6 +484,7 @@ early_wakeup:
/* Clear SLEEP mode set in INFORM1 */
pmu_raw_writel(0x0, S5P_INFORM1);
+ exynos_set_delayed_reset_assertion(true);
}
static void exynos3250_pm_resume(void)
@@ -723,8 +726,10 @@ void __init exynos_pm_init(void)
return;
}
- if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL)))
+ if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
+ return;
+ }
pm_data = (const struct exynos_pm_data *) match->data;
diff --git a/arch/arm/mach-gemini/common.h b/arch/arm/mach-gemini/common.h
index 38a45260a7c8..dd883698ff7e 100644
--- a/arch/arm/mach-gemini/common.h
+++ b/arch/arm/mach-gemini/common.h
@@ -12,6 +12,8 @@
#ifndef __GEMINI_COMMON_H__
#define __GEMINI_COMMON_H__
+#include <linux/reboot.h>
+
struct mtd_partition;
extern void gemini_map_io(void);
@@ -26,6 +28,6 @@ extern int platform_register_pflash(unsigned int size,
struct mtd_partition *parts,
unsigned int nr_parts);
-extern void gemini_restart(char mode, const char *cmd);
+extern void gemini_restart(enum reboot_mode mode, const char *cmd);
#endif /* __GEMINI_COMMON_H__ */
diff --git a/arch/arm/mach-gemini/reset.c b/arch/arm/mach-gemini/reset.c
index b26659759e27..21a6d6d4f9c4 100644
--- a/arch/arm/mach-gemini/reset.c
+++ b/arch/arm/mach-gemini/reset.c
@@ -14,7 +14,9 @@
#include <mach/hardware.h>
#include <mach/global_reg.h>
-void gemini_restart(char mode, const char *cmd)
+#include "common.h"
+
+void gemini_restart(enum reboot_mode mode, const char *cmd)
{
__raw_writel(RESET_GLOBAL | RESET_CPU1,
IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index fb8d4a2ad48c..a5edd7d60266 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 355b08936871..752969ff9de0 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -171,6 +171,12 @@
*/
#define LINKS_PER_OCP_IF 2
+/*
+ * Address offset (in bytes) between the reset control and the reset
+ * status registers: 4 bytes on OMAP4
+ */
+#define OMAP4_RST_CTRL_ST_OFFSET 4
+
/**
* struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
* @enable_module: function to enable a module (via MODULEMODE)
@@ -3016,10 +3022,12 @@ static int _omap4_deassert_hardreset(struct omap_hwmod *oh,
if (ohri->st_shift)
pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
oh->name, ohri->name);
- return omap_prm_deassert_hardreset(ohri->rst_shift, 0,
+ return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->rst_shift,
oh->clkdm->pwrdm.ptr->prcm_partition,
oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs, 0);
+ oh->prcm.omap4.rstctrl_offs,
+ oh->prcm.omap4.rstctrl_offs +
+ OMAP4_RST_CTRL_ST_OFFSET);
}
/**
@@ -3048,27 +3056,6 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
}
/**
- * _am33xx_assert_hardreset - call AM33XX PRM hardreset fn with hwmod args
- * @oh: struct omap_hwmod * to assert hardreset
- * @ohri: hardreset line data
- *
- * Call am33xx_prminst_assert_hardreset() with parameters extracted
- * from the hwmod @oh and the hardreset line data @ohri. Only
- * intended for use as an soc_ops function pointer. Passes along the
- * return value from am33xx_prminst_assert_hardreset(). XXX This
- * function is scheduled for removal when the PRM code is moved into
- * drivers/.
- */
-static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
- struct omap_hwmod_rst_info *ohri)
-
-{
- return omap_prm_assert_hardreset(ohri->rst_shift, 0,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
-}
-
-/**
* _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
* @oh: struct omap_hwmod * to deassert hardreset
* @ohri: hardreset line data
@@ -3083,32 +3070,13 @@ static int _am33xx_assert_hardreset(struct omap_hwmod *oh,
static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
- return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0,
+ return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift,
+ oh->clkdm->pwrdm.ptr->prcm_partition,
oh->clkdm->pwrdm.ptr->prcm_offs,
oh->prcm.omap4.rstctrl_offs,
oh->prcm.omap4.rstst_offs);
}
-/**
- * _am33xx_is_hardreset_asserted - call AM33XX PRM hardreset fn with hwmod args
- * @oh: struct omap_hwmod * to test hardreset
- * @ohri: hardreset line data
- *
- * Call am33xx_prminst_is_hardreset_asserted() with parameters
- * extracted from the hwmod @oh and the hardreset line data @ohri.
- * Only intended for use as an soc_ops function pointer. Passes along
- * the return value from am33xx_prminst_is_hardreset_asserted(). XXX
- * This function is scheduled for removal when the PRM code is moved
- * into drivers/.
- */
-static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
- struct omap_hwmod_rst_info *ohri)
-{
- return omap_prm_is_hardreset_asserted(ohri->rst_shift, 0,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
-}
-
/* Public functions */
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
@@ -3908,21 +3876,13 @@ void __init omap_hwmod_init(void)
soc_ops.init_clkdm = _init_clkdm;
soc_ops.update_context_lost = _omap4_update_context_lost;
soc_ops.get_context_lost = _omap4_get_context_lost;
- } else if (soc_is_am43xx()) {
+ } else if (cpu_is_ti816x() || soc_is_am33xx() || soc_is_am43xx()) {
soc_ops.enable_module = _omap4_enable_module;
soc_ops.disable_module = _omap4_disable_module;
soc_ops.wait_target_ready = _omap4_wait_target_ready;
soc_ops.assert_hardreset = _omap4_assert_hardreset;
- soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
- soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
- soc_ops.init_clkdm = _init_clkdm;
- } else if (cpu_is_ti816x() || soc_is_am33xx()) {
- soc_ops.enable_module = _omap4_enable_module;
- soc_ops.disable_module = _omap4_disable_module;
- soc_ops.wait_target_ready = _omap4_wait_target_ready;
- soc_ops.assert_hardreset = _am33xx_assert_hardreset;
soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
- soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
+ soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
} else {
WARN(1, "omap_hwmod: unknown SoC type\n");
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index e2223148ba4d..17e8004fc20f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -544,6 +544,44 @@ static struct omap_hwmod am43xx_hdq1w_hwmod = {
},
};
+static struct omap_hwmod_class_sysconfig am43xx_vpfe_sysc = {
+ .rev_offs = 0x0,
+ .sysc_offs = 0x104,
+ .sysc_flags = SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_SMART | MSTANDBY_NO),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_vpfe_hwmod_class = {
+ .name = "vpfe",
+ .sysc = &am43xx_vpfe_sysc,
+};
+
+static struct omap_hwmod am43xx_vpfe0_hwmod = {
+ .name = "vpfe0",
+ .class = &am43xx_vpfe_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .prcm = {
+ .omap4 = {
+ .modulemode = MODULEMODE_SWCTRL,
+ .clkctrl_offs = AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET,
+ },
+ },
+};
+
+static struct omap_hwmod am43xx_vpfe1_hwmod = {
+ .name = "vpfe1",
+ .class = &am43xx_vpfe_hwmod_class,
+ .clkdm_name = "l3s_clkdm",
+ .prcm = {
+ .omap4 = {
+ .modulemode = MODULEMODE_SWCTRL,
+ .clkctrl_offs = AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET,
+ },
+ },
+};
+
/* Interfaces */
static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = {
.master = &am33xx_l3_main_hwmod,
@@ -825,6 +863,34 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__hdq1w = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe0 = {
+ .master = &am43xx_vpfe0_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "l3_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l3__vpfe1 = {
+ .master = &am43xx_vpfe1_hwmod,
+ .slave = &am33xx_l3_main_hwmod,
+ .clk = "l3_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe0 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_vpfe0_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if am43xx_l4_ls__vpfe1 = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am43xx_vpfe1_hwmod,
+ .clk = "l4ls_gclk",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l4_wkup__synctimer,
&am43xx_l4_ls__timer8,
@@ -925,6 +991,10 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
&am43xx_l4_ls__dss_dispc,
&am43xx_l4_ls__dss_rfbi,
&am43xx_l4_ls__hdq1w,
+ &am43xx_l3__vpfe0,
+ &am43xx_l3__vpfe1,
+ &am43xx_l4_ls__vpfe0,
+ &am43xx_l4_ls__vpfe1,
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h
index 48df3b55057e..d0261996db6d 100644
--- a/arch/arm/mach-omap2/prcm43xx.h
+++ b/arch/arm/mach-omap2/prcm43xx.h
@@ -144,5 +144,6 @@
#define AM43XX_CM_PER_USBPHYOCP2SCP1_CLKCTRL_OFFSET 0x05C0
#define AM43XX_CM_PER_DSS_CLKCTRL_OFFSET 0x0a20
#define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0
-
+#define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068
+#define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070
#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index cbefbd7cfdb5..661d753df584 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -112,6 +112,7 @@
#define OMAP3430_VC_CMD_ONLP_SHIFT 16
#define OMAP3430_VC_CMD_RET_SHIFT 8
#define OMAP3430_VC_CMD_OFF_SHIFT 0
+#define OMAP3430_SREN_MASK (1 << 4)
#define OMAP3430_HSEN_MASK (1 << 3)
#define OMAP3430_MCODE_MASK (0x7 << 0)
#define OMAP3430_VALID_MASK (1 << 24)
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index b1c7a33e00e7..e794828dee55 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -35,6 +35,7 @@
#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1
#define OMAP4430_GLOBAL_WUEN_MASK (1 << 16)
#define OMAP4430_HSMCODE_MASK (0x7 << 0)
+#define OMAP4430_SRMODEEN_MASK (1 << 4)
#define OMAP4430_HSMODEEN_MASK (1 << 3)
#define OMAP4430_HSSCLL_SHIFT 24
#define OMAP4430_ICEPICK_RST_SHIFT 9
diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c
index c4859c4d3646..d0b15dbafa2e 100644
--- a/arch/arm/mach-omap2/prminst44xx.c
+++ b/arch/arm/mach-omap2/prminst44xx.c
@@ -87,12 +87,6 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
return v;
}
-/*
- * Address offset (in bytes) between the reset control and the reset
- * status registers: 4 bytes on OMAP4
- */
-#define OMAP4_RST_CTRL_ST_OFFSET 4
-
/**
* omap4_prminst_is_hardreset_asserted - read the HW reset line state of
* submodules contained in the hwmod module
@@ -141,11 +135,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
* omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
* wait
* @shift: register bit shift corresponding to the reset line to deassert
- * @st_shift: status bit offset, not used for OMAP4+
+ * @st_shift: status bit offset corresponding to the reset line
* @part: PRM partition
* @inst: PRM instance offset
* @rstctrl_offs: reset register offset
- * @st_offs: reset status register offset, not used for OMAP4+
+ * @rstst_offs: reset status register offset
*
* Some IPs like dsp, ipu or iva contain processors that require an HW
* reset line to be asserted / deasserted in order to fully enable the
@@ -157,11 +151,11 @@ int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
* of reset, or -EBUSY if the submodule did not exit reset promptly.
*/
int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
- u16 rstctrl_offs, u16 st_offs)
+ u16 rstctrl_offs, u16 rstst_offs)
{
int c;
u32 mask = 1 << shift;
- u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET;
+ u32 st_mask = 1 << st_shift;
/* Check the current status to avoid de-asserting the line twice */
if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
@@ -169,13 +163,13 @@ int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
return -EEXIST;
/* Clear the reset status by writing 1 to the status bit */
- omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst,
+ omap4_prminst_rmw_inst_reg_bits(0xffffffff, st_mask, part, inst,
rstst_offs);
/* de-assert the reset control line */
omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
/* wait the status to be set */
- omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst,
- rstst_offs),
+ omap_test_timeout(omap4_prminst_is_hardreset_asserted(st_shift, part,
+ inst, rstst_offs),
MAX_MODULE_HARDRESET_WAIT, c);
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index cef67af9e9b8..cac46d852da1 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -298,14 +298,11 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
if (IS_ERR(src))
return PTR_ERR(src);
- if (clk_get_parent(timer->fclk) != src) {
- r = clk_set_parent(timer->fclk, src);
- if (r < 0) {
- pr_warn("%s: %s cannot set source\n", __func__,
- oh->name);
- clk_put(src);
- return r;
- }
+ r = clk_set_parent(timer->fclk, src);
+ if (r < 0) {
+ pr_warn("%s: %s cannot set source\n", __func__, oh->name);
+ clk_put(src);
+ return r;
}
clk_put(src);
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index be9ef834fa81..076fd20d7e5a 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
* idle. And we can also scale voltages to zero for off-idle.
* Note that no actual voltage scaling during off-idle will
* happen unless the board specific twl4030 PMIC scripts are
- * loaded.
+ * loaded. See also omap_vc_i2c_init for comments regarding
+ * erratum i531.
*/
val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
@@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
return;
}
+ /*
+ * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
+ * erratum i531 "Extra Power Consumed When Repeated Start Operation
+ * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
+ * Otherwise I2C4 eventually leads into about 23mW extra power being
+ * consumed even during off idle using VMODE.
+ */
i2c_high_speed = voltdm->pmic->i2c_high_speed;
if (i2c_high_speed)
- voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+ voltdm->rmw(vc->common->i2c_cfg_clear_mask,
vc->common->i2c_cfg_hsen_mask,
vc->common->i2c_cfg_reg);
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index cdbdd78e755e..89b83b7ff3ec 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -34,6 +34,7 @@ struct voltagedomain;
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
* @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
* @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
* @i2c_mcode_mask: MCODE field mask for I2C config register
*
@@ -52,6 +53,7 @@ struct omap_vc_common {
u8 cmd_ret_shift;
u8 cmd_off_shift;
u8 i2c_cfg_reg;
+ u8 i2c_cfg_clear_mask;
u8 i2c_cfg_hsen_mask;
u8 i2c_mcode_mask;
};
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index 75bc4aa22b3a..71d74c9172c1 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = {
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
+ .i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
.i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
.i2c_mcode_mask = OMAP3430_MCODE_MASK,
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index 085e5d6a04fd..2abd5fa8a697 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = {
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+ .i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
.i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
};
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8896e71586f5..f09683687963 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -691,4 +691,13 @@ config SHARPSL_PM_MAX1111
config PXA310_ULPI
bool
+config PXA_SYSTEMS_CPLDS
+ tristate "Motherboard cplds"
+ default ARCH_LUBBOCK || MACH_MAINSTONE
+ help
+ This driver supports the Lubbock and Mainstone multifunction chip
+ found on the pxa25x development platform system (Lubbock) and pxa27x
+ development platform system (Mainstone). This IO board supports the
+ interrupts handling, ethernet controller, flash chips, etc ...
+
endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index eb0bf7678a99..4087d334ecdf 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -90,4 +90,5 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
+obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 958cd6af9384..1eecf794acd2 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -37,7 +37,9 @@
#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
/* Board specific IRQs */
-#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
+#define LUBBOCK_NR_IRQS IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x) (LUBBOCK_NR_IRQS + (x))
#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
@@ -47,8 +49,7 @@
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
-#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55)
+#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32)
#ifndef __ASSEMBLY__
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 1bfc4e822a41..e82a7d31104e 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -120,7 +120,9 @@
#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
/* board specific IRQs */
-#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
+#define MAINSTONE_NR_IRQS IRQ_BOARD_START
+
+#define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x))
#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
@@ -136,6 +138,4 @@
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
-#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16)
-
#endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index d8a1be619f21..4ac9ab80d24b 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
}
EXPORT_SYMBOL(lubbock_set_misc_wr);
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
- int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
- LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
- int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
- /* the irq can be acknowledged only if deasserted, so it's done here */
- LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
- LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
- .name = "FPGA",
- .irq_ack = lubbock_mask_irq,
- .irq_mask = lubbock_mask_irq,
- .irq_unmask = lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
- do {
- /* clear our parent irq */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- if (likely(pending)) {
- irq = LUBBOCK_IRQ(0) + __ffs(pending);
- generic_handle_irq(irq);
- }
- pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
- } while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
- int irq;
-
- pxa25x_init_irq();
-
- /* setup extra lubbock irqs */
- for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
- irq_set_chip_and_handler(irq, &lubbock_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
- irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
- LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
- .resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
- if (machine_is_lubbock()) {
- register_syscore_ops(&lubbock_irq_syscore_ops);
- return 0;
- }
- return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
static int lubbock_udc_is_connected(void)
{
return (LUB_MISC_RD & (1 << 9)) == 0;
@@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = {
},
};
+static struct resource lubbock_cplds_resources[] = {
+ [0] = {
+ .start = LUBBOCK_FPGA_PHYS + 0xc0,
+ .end = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(0),
+ .end = PXA_GPIO_TO_IRQ(0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+ [2] = {
+ .start = LUBBOCK_IRQ(0),
+ .end = LUBBOCK_IRQ(6),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lubbock_cplds_device = {
+ .name = "pxa_cplds_irqs",
+ .id = -1,
+ .resource = &lubbock_cplds_resources[0],
+ .num_resources = 3,
+};
+
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
+ &lubbock_cplds_device,
};
static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
/* Maintainer: MontaVista Software Inc. */
.map_io = lubbock_map_io,
.nr_irqs = LUBBOCK_NR_IRQS,
- .init_irq = lubbock_init_irq,
+ .init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = lubbock_init,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 78b84c0dfc79..2c0658cf6be2 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
@@ -122,92 +123,6 @@ static unsigned long mainstone_pin_config[] = {
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
};
-static unsigned long mainstone_irq_enabled;
-
-static void mainstone_mask_irq(struct irq_data *d)
-{
- int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
- MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
-}
-
-static void mainstone_unmask_irq(struct irq_data *d)
-{
- int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
- /* the irq can be acknowledged only if deasserted, so it's done here */
- MST_INTSETCLR &= ~(1 << mainstone_irq);
- MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
-}
-
-static struct irq_chip mainstone_irq_chip = {
- .name = "FPGA",
- .irq_ack = mainstone_mask_irq,
- .irq_mask = mainstone_mask_irq,
- .irq_unmask = mainstone_unmask_irq,
-};
-
-static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
- do {
- /* clear useless edge notification */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- if (likely(pending)) {
- irq = MAINSTONE_IRQ(0) + __ffs(pending);
- generic_handle_irq(irq);
- }
- pending = MST_INTSETCLR & mainstone_irq_enabled;
- } while (pending);
-}
-
-static void __init mainstone_init_irq(void)
-{
- int irq;
-
- pxa27x_init_irq();
-
- /* setup extra Mainstone irqs */
- for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
- irq_set_chip_and_handler(irq, &mainstone_irq_chip,
- handle_level_irq);
- if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
- else
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- set_irq_flags(MAINSTONE_IRQ(8), 0);
- set_irq_flags(MAINSTONE_IRQ(12), 0);
-
- MST_INTMSKENA = 0;
- MST_INTSETCLR = 0;
-
- irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
- irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void mainstone_irq_resume(void)
-{
- MST_INTMSKENA = mainstone_irq_enabled;
-}
-
-static struct syscore_ops mainstone_irq_syscore_ops = {
- .resume = mainstone_irq_resume,
-};
-
-static int __init mainstone_irq_device_init(void)
-{
- if (machine_is_mainstone())
- register_syscore_ops(&mainstone_irq_syscore_ops);
-
- return 0;
-}
-
-device_initcall(mainstone_irq_device_init);
-
-#endif
-
-
static struct resource smc91x_resources[] = {
[0] = {
.start = (MST_ETH_PHYS + 0x300),
@@ -487,11 +402,37 @@ static struct platform_device mst_gpio_keys_device = {
},
};
+static struct resource mst_cplds_resources[] = {
+ [0] = {
+ .start = MST_FPGA_PHYS + 0xc0,
+ .end = MST_FPGA_PHYS + 0xe0 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(0),
+ .end = PXA_GPIO_TO_IRQ(0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+ [2] = {
+ .start = MAINSTONE_IRQ(0),
+ .end = MAINSTONE_IRQ(15),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mst_cplds_device = {
+ .name = "pxa_cplds_irqs",
+ .id = -1,
+ .resource = &mst_cplds_resources[0],
+ .num_resources = 3,
+};
+
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
&mst_flash_device[0],
&mst_flash_device[1],
&mst_gpio_keys_device,
+ &mst_cplds_device,
};
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
@@ -718,7 +659,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
.atag_offset = 0x100, /* BLOB boot parameter setting */
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
- .init_irq = mainstone_init_irq,
+ .init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = mainstone_init,
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
new file mode 100644
index 000000000000..f1aeb54fabe3
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -0,0 +1,200 @@
+/*
+ * Intel Reference Systems cplds
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define FPGA_IRQ_MASK_EN 0x0
+#define FPGA_IRQ_SET_CLR 0x10
+
+#define CPLDS_NB_IRQ 32
+
+struct cplds {
+ void __iomem *base;
+ int irq;
+ unsigned int irq_mask;
+ struct gpio_desc *gpio0;
+ struct irq_domain *irqdomain;
+};
+
+static irqreturn_t cplds_irq_handler(int in_irq, void *d)
+{
+ struct cplds *fpga = d;
+ unsigned long pending;
+ unsigned int bit;
+
+ pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+ for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
+ generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+
+ return IRQ_HANDLED;
+}
+
+static void cplds_irq_mask_ack(struct irq_data *d)
+{
+ struct cplds *fpga = irq_data_get_irq_chip_data(d);
+ unsigned int cplds_irq = irqd_to_hwirq(d);
+ unsigned int set, bit = BIT(cplds_irq);
+
+ fpga->irq_mask &= ~bit;
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+ set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+ writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
+}
+
+static void cplds_irq_unmask(struct irq_data *d)
+{
+ struct cplds *fpga = irq_data_get_irq_chip_data(d);
+ unsigned int cplds_irq = irqd_to_hwirq(d);
+ unsigned int bit = BIT(cplds_irq);
+
+ fpga->irq_mask |= bit;
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+}
+
+static struct irq_chip cplds_irq_chip = {
+ .name = "pxa_cplds",
+ .irq_mask_ack = cplds_irq_mask_ack,
+ .irq_unmask = cplds_irq_unmask,
+ .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct cplds *fpga = d->host_data;
+
+ irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, fpga);
+
+ return 0;
+}
+
+static const struct irq_domain_ops cplds_irq_domain_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .map = cplds_irq_domain_map,
+};
+
+static int cplds_resume(struct platform_device *pdev)
+{
+ struct cplds *fpga = platform_get_drvdata(pdev);
+
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+
+ return 0;
+}
+
+static int cplds_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct cplds *fpga;
+ int ret;
+ unsigned int base_irq = 0;
+ unsigned long irqflags = 0;
+
+ fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
+ if (!fpga)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res) {
+ fpga->irq = (unsigned int)res->start;
+ irqflags = res->flags;
+ }
+ if (!fpga->irq)
+ return -ENODEV;
+
+ base_irq = platform_get_irq(pdev, 1);
+ if (base_irq < 0)
+ base_irq = 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ fpga->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fpga->base))
+ return PTR_ERR(fpga->base);
+
+ platform_set_drvdata(pdev, fpga);
+
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+ writel(0, fpga->base + FPGA_IRQ_SET_CLR);
+
+ ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
+ irqflags, dev_name(&pdev->dev), fpga);
+ if (ret == -ENOSYS)
+ return -EPROBE_DEFER;
+
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
+ fpga->irq, ret);
+ return ret;
+ }
+
+ irq_set_irq_wake(fpga->irq, 1);
+ fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
+ CPLDS_NB_IRQ,
+ &cplds_irq_domain_ops, fpga);
+ if (!fpga->irqdomain)
+ return -ENODEV;
+
+ if (base_irq) {
+ ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
+ CPLDS_NB_IRQ);
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
+ base_irq, base_irq + CPLDS_NB_IRQ);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int cplds_remove(struct platform_device *pdev)
+{
+ struct cplds *fpga = platform_get_drvdata(pdev);
+
+ irq_set_chip_and_handler(fpga->irq, NULL, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id cplds_id_table[] = {
+ { .compatible = "intel,lubbock-cplds-irqs", },
+ { .compatible = "intel,mainstone-cplds-irqs", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cplds_id_table);
+
+static struct platform_driver cplds_driver = {
+ .driver = {
+ .name = "pxa_cplds_irqs",
+ .of_match_table = of_match_ptr(cplds_id_table),
+ },
+ .probe = cplds_probe,
+ .remove = cplds_remove,
+ .resume = cplds_resume,
+};
+
+module_platform_driver(cplds_driver);
+
+MODULE_DESCRIPTION("PXA Cplds interrupts driver");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index b07d88602073..b0dcbe28f78c 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -83,6 +83,13 @@ static void rk3288_slp_mode_set(int level)
SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
| SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
+ /*
+ * The dapswjdp can not auto reset before resume, that cause it may
+ * access some illegal address during resume. Let's disable it before
+ * suspend, and the MASKROM will enable it back.
+ */
+ regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
+
/* booting address of resuming system is from this register value */
regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
rk3288_bootram_phy);
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
index 03ff31d8282d..3e8d39c0c3d5 100644
--- a/arch/arm/mach-rockchip/pm.h
+++ b/arch/arm/mach-rockchip/pm.h
@@ -55,6 +55,10 @@ static inline void rockchip_suspend_init(void)
#define SGRF_FAST_BOOT_EN BIT(8)
#define SGRF_FAST_BOOT_EN_WRITE BIT(24)
+#define RK3288_SGRF_CPU_CON0 (0x40)
+#define SGRF_DAPDEVICEEN BIT(0)
+#define SGRF_DAPDEVICEEN_WRITE BIT(16)
+
#define RK3288_CRU_MODE_CON 0x50
#define RK3288_CRU_SEL0_CON 0x60
#define RK3288_CRU_SEL1_CON 0x64
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index d360ec044b66..b6cf3b449428 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -30,11 +30,30 @@
#include "pm.h"
#define RK3288_GRF_SOC_CON0 0x244
+#define RK3288_TIMER6_7_PHYS 0xff810000
static void __init rockchip_timer_init(void)
{
if (of_machine_is_compatible("rockchip,rk3288")) {
struct regmap *grf;
+ void __iomem *reg_base;
+
+ /*
+ * Most/all uboot versions for rk3288 don't enable timer7
+ * which is needed for the architected timer to work.
+ * So make sure it is running during early boot.
+ */
+ reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
+ if (reg_base) {
+ writel(0, reg_base + 0x30);
+ writel(0xffffffff, reg_base + 0x20);
+ writel(0xffffffff, reg_base + 0x24);
+ writel(1, reg_base + 0x30);
+ dsb();
+ iounmap(reg_base);
+ } else {
+ pr_err("rockchip: could not map timer7 registers\n");
+ }
/*
* Disable auto jtag/sdmmc switching that causes issues
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 09c5fe3d30c2..7e7583ddd607 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -1878,7 +1878,7 @@ struct dma_map_ops iommu_coherent_ops = {
* arm_iommu_attach_device function.
*/
struct dma_iommu_mapping *
-arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
+arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, u64 size)
{
unsigned int bits = size >> PAGE_SHIFT;
unsigned int bitmap_size = BITS_TO_LONGS(bits) * sizeof(long);
@@ -1886,6 +1886,10 @@ arm_iommu_create_mapping(struct bus_type *bus, dma_addr_t base, size_t size)
int extensions = 1;
int err = -ENOMEM;
+ /* currently only 32-bit DMA address space is supported */
+ if (size > DMA_BIT_MASK(32) + 1)
+ return ERR_PTR(-ERANGE);
+
if (!bitmap_size)
return ERR_PTR(-EINVAL);
@@ -2057,13 +2061,6 @@ static bool arm_setup_iommu_dma_ops(struct device *dev, u64 dma_base, u64 size,
if (!iommu)
return false;
- /*
- * currently arm_iommu_create_mapping() takes a max of size_t
- * for size param. So check this limit for now.
- */
- if (size > SIZE_MAX)
- return false;
-
mapping = arm_iommu_create_mapping(dev->bus, dma_base, size);
if (IS_ERR(mapping)) {
pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index aa0519eed698..774ef1323554 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -22,8 +22,6 @@
*
* These are the low level assembler for performing cache and TLB
* functions on the arm1020.
- *
- * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
*/
#include <linux/linkage.h>
#include <linux/init.h>
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index bff4c7f70fd6..ae3c27b71594 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -22,8 +22,6 @@
*
* These are the low level assembler for performing cache and TLB
* functions on the arm1020e.
- *
- * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
*/
#include <linux/linkage.h>
#include <linux/init.h>
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index ede8c54ab4aa..32a47cc19076 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -441,9 +441,6 @@ ENTRY(cpu_arm925_set_pte_ext)
.type __arm925_setup, #function
__arm925_setup:
mov r0, #0
-#if defined(CONFIG_CPU_ICACHE_STREAMING_DISABLE)
- orr r0,r0,#1 << 7
-#endif
/* Transparent on, D-cache clean & flush mode. See NOTE2 above */
orr r0,r0,#1 << 1 @ transparent mode on
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index e494d6d6acbe..92e08bf37aad 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -602,7 +602,6 @@ __\name\()_proc_info:
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
initfn __feroceon_setup, __\name\()_proc_info
- .long __feroceon_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index e1268f905026..4550d247e308 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -54,6 +54,7 @@
#define SEEN_DATA (1 << (BPF_MEMWORDS + 3))
#define FLAG_NEED_X_RESET (1 << 0)
+#define FLAG_IMM_OVERFLOW (1 << 1)
struct jit_ctx {
const struct bpf_prog *skf;
@@ -293,6 +294,15 @@ static u16 imm_offset(u32 k, struct jit_ctx *ctx)
/* PC in ARM mode == address of the instruction + 8 */
imm = offset - (8 + ctx->idx * 4);
+ if (imm & ~0xfff) {
+ /*
+ * literal pool is too far, signal it into flags. we
+ * can only detect it on the second pass unfortunately.
+ */
+ ctx->flags |= FLAG_IMM_OVERFLOW;
+ return 0;
+ }
+
return imm;
}
@@ -449,10 +459,21 @@ static inline void emit_udiv(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx)
return;
}
#endif
- if (rm != ARM_R0)
- emit(ARM_MOV_R(ARM_R0, rm), ctx);
+
+ /*
+ * For BPF_ALU | BPF_DIV | BPF_K instructions, rm is ARM_R4
+ * (r_A) and rn is ARM_R0 (r_scratch) so load rn first into
+ * ARM_R1 to avoid accidentally overwriting ARM_R0 with rm
+ * before using it as a source for ARM_R1.
+ *
+ * For BPF_ALU | BPF_DIV | BPF_X rm is ARM_R4 (r_A) and rn is
+ * ARM_R5 (r_X) so there is no particular register overlap
+ * issues.
+ */
if (rn != ARM_R1)
emit(ARM_MOV_R(ARM_R1, rn), ctx);
+ if (rm != ARM_R0)
+ emit(ARM_MOV_R(ARM_R0, rm), ctx);
ctx->seen |= SEEN_CALL;
emit_mov_i(ARM_R3, (u32)jit_udiv, ctx);
@@ -852,9 +873,27 @@ b_epilogue:
off = offsetof(struct sk_buff, queue_mapping);
emit(ARM_LDRH_I(r_A, r_skb, off), ctx);
break;
+ case BPF_LDX | BPF_W | BPF_ABS:
+ /*
+ * load a 32bit word from struct seccomp_data.
+ * seccomp_check_filter() will already have checked
+ * that k is 32bit aligned and lies within the
+ * struct seccomp_data.
+ */
+ ctx->seen |= SEEN_SKB;
+ emit(ARM_LDR_I(r_A, r_skb, k), ctx);
+ break;
default:
return -1;
}
+
+ if (ctx->flags & FLAG_IMM_OVERFLOW)
+ /*
+ * this instruction generated an overflow when
+ * trying to access the literal pool, so
+ * delegate this filter to the kernel interpreter.
+ */
+ return -1;
}
/* compute offsets only during the first pass */
@@ -917,7 +956,14 @@ void bpf_jit_compile(struct bpf_prog *fp)
ctx.idx = 0;
build_prologue(&ctx);
- build_body(&ctx);
+ if (build_body(&ctx) < 0) {
+#if __LINUX_ARM_ARCH__ < 7
+ if (ctx.imm_count)
+ kfree(ctx.imms);
+#endif
+ bpf_jit_binary_free(header);
+ goto out;
+ }
build_epilogue(&ctx);
flush_icache_range((u32)ctx.target, (u32)(ctx.target + ctx.idx));
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index 224081ccc92f..7d0f07020c80 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -272,6 +272,7 @@ void xen_arch_pre_suspend(void) { }
void xen_arch_post_suspend(int suspend_cancelled) { }
void xen_timer_resume(void) { }
void xen_arch_resume(void) { }
+void xen_arch_suspend(void) { }
/* In the hypervisor.S file. */
diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c
index 793551d15f1d..498325074a06 100644
--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@@ -4,6 +4,7 @@
#include <linux/gfp.h>
#include <linux/highmem.h>
#include <linux/export.h>
+#include <linux/memblock.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/types.h>
@@ -21,6 +22,20 @@
#include <asm/xen/hypercall.h>
#include <asm/xen/interface.h>
+unsigned long xen_get_swiotlb_free_pages(unsigned int order)
+{
+ struct memblock_region *reg;
+ gfp_t flags = __GFP_NOWARN;
+
+ for_each_memblock(memory, reg) {
+ if (reg->base < (phys_addr_t)0xffffffff) {
+ flags |= __GFP_DMA;
+ break;
+ }
+ }
+ return __get_free_pages(flags, order);
+}
+
enum dma_cache_op {
DMA_UNMAP,
DMA_MAP,
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 4269dba63cf1..7796af4b1d6f 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -31,6 +31,7 @@ config ARM64
select GENERIC_EARLY_IOREMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
+ select GENERIC_IRQ_SHOW_LEVEL
select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
index c138b95a8356..351c95bda89e 100644
--- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi
@@ -21,6 +21,20 @@
clock-output-names = "juno_mb:clk25mhz";
};
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "juno_mb:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "juno_mb:refclk32khz";
+ };
+
motherboard {
compatible = "arm,vexpress,v2p-p1", "simple-bus";
#address-cells = <2>; /* SMB chipselect number and offset */
@@ -66,6 +80,15 @@
#size-cells = <1>;
ranges = <0 3 0 0x200000>;
+ v2m_sysctl: sysctl@020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ };
+
mmci@050000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
@@ -106,16 +129,16 @@
compatible = "arm,sp804", "arm,primecell";
reg = <0x110000 0x10000>;
interrupts = <9>;
- clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
- clock-names = "timclken1", "apb_pclk";
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
};
v2m_timer23: timer@120000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x120000 0x10000>;
interrupts = <9>;
- clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
- clock-names = "timclken1", "apb_pclk";
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
};
rtc@170000 {
diff --git a/arch/arm64/crypto/crc32-arm64.c b/arch/arm64/crypto/crc32-arm64.c
index 9499199924ae..6a37c3c6b11d 100644
--- a/arch/arm64/crypto/crc32-arm64.c
+++ b/arch/arm64/crypto/crc32-arm64.c
@@ -147,13 +147,21 @@ static int chksum_final(struct shash_desc *desc, u8 *out)
{
struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+ put_unaligned_le32(ctx->crc, out);
+ return 0;
+}
+
+static int chksumc_final(struct shash_desc *desc, u8 *out)
+{
+ struct chksum_desc_ctx *ctx = shash_desc_ctx(desc);
+
put_unaligned_le32(~ctx->crc, out);
return 0;
}
static int __chksum_finup(u32 crc, const u8 *data, unsigned int len, u8 *out)
{
- put_unaligned_le32(~crc32_arm64_le_hw(crc, data, len), out);
+ put_unaligned_le32(crc32_arm64_le_hw(crc, data, len), out);
return 0;
}
@@ -199,6 +207,14 @@ static int crc32_cra_init(struct crypto_tfm *tfm)
{
struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
+ mctx->key = 0;
+ return 0;
+}
+
+static int crc32c_cra_init(struct crypto_tfm *tfm)
+{
+ struct chksum_ctx *mctx = crypto_tfm_ctx(tfm);
+
mctx->key = ~0;
return 0;
}
@@ -229,7 +245,7 @@ static struct shash_alg crc32c_alg = {
.setkey = chksum_setkey,
.init = chksum_init,
.update = chksumc_update,
- .final = chksum_final,
+ .final = chksumc_final,
.finup = chksumc_finup,
.digest = chksumc_digest,
.descsize = sizeof(struct chksum_desc_ctx),
@@ -241,7 +257,7 @@ static struct shash_alg crc32c_alg = {
.cra_alignmask = 0,
.cra_ctxsize = sizeof(struct chksum_ctx),
.cra_module = THIS_MODULE,
- .cra_init = crc32_cra_init,
+ .cra_init = crc32c_cra_init,
}
};
diff --git a/arch/arm64/crypto/sha1-ce-glue.c b/arch/arm64/crypto/sha1-ce-glue.c
index 114e7cc5de8c..aefda9868627 100644
--- a/arch/arm64/crypto/sha1-ce-glue.c
+++ b/arch/arm64/crypto/sha1-ce-glue.c
@@ -74,6 +74,9 @@ static int sha1_ce_finup(struct shash_desc *desc, const u8 *data,
static int sha1_ce_final(struct shash_desc *desc, u8 *out)
{
+ struct sha1_ce_state *sctx = shash_desc_ctx(desc);
+
+ sctx->finalize = 0;
kernel_neon_begin_partial(16);
sha1_base_do_finalize(desc, (sha1_block_fn *)sha1_ce_transform);
kernel_neon_end();
diff --git a/arch/arm64/crypto/sha2-ce-glue.c b/arch/arm64/crypto/sha2-ce-glue.c
index 1340e44c048b..7cd587564a41 100644
--- a/arch/arm64/crypto/sha2-ce-glue.c
+++ b/arch/arm64/crypto/sha2-ce-glue.c
@@ -75,6 +75,9 @@ static int sha256_ce_finup(struct shash_desc *desc, const u8 *data,
static int sha256_ce_final(struct shash_desc *desc, u8 *out)
{
+ struct sha256_ce_state *sctx = shash_desc_ctx(desc);
+
+ sctx->finalize = 0;
kernel_neon_begin_partial(28);
sha256_base_do_finalize(desc, (sha256_block_fn *)sha2_ce_transform);
kernel_neon_end();
diff --git a/arch/arm64/include/asm/barrier.h b/arch/arm64/include/asm/barrier.h
index a5abb0062d6e..71f19c4dc0de 100644
--- a/arch/arm64/include/asm/barrier.h
+++ b/arch/arm64/include/asm/barrier.h
@@ -65,6 +65,14 @@ do { \
do { \
compiletime_assert_atomic_type(*p); \
switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("stlrb %w1, %0" \
+ : "=Q" (*p) : "r" (v) : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("stlrh %w1, %0" \
+ : "=Q" (*p) : "r" (v) : "memory"); \
+ break; \
case 4: \
asm volatile ("stlr %w1, %0" \
: "=Q" (*p) : "r" (v) : "memory"); \
@@ -81,6 +89,14 @@ do { \
typeof(*p) ___p1; \
compiletime_assert_atomic_type(*p); \
switch (sizeof(*p)) { \
+ case 1: \
+ asm volatile ("ldarb %w0, %1" \
+ : "=r" (___p1) : "Q" (*p) : "memory"); \
+ break; \
+ case 2: \
+ asm volatile ("ldarh %w0, %1" \
+ : "=r" (___p1) : "Q" (*p) : "memory"); \
+ break; \
case 4: \
asm volatile ("ldar %w0, %1" \
: "=r" (___p1) : "Q" (*p) : "memory"); \
diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c
index 21033bba9390..28f8365edc4c 100644
--- a/arch/arm64/kernel/alternative.c
+++ b/arch/arm64/kernel/alternative.c
@@ -24,7 +24,6 @@
#include <asm/cacheflush.h>
#include <asm/alternative.h>
#include <asm/cpufeature.h>
-#include <asm/insn.h>
#include <linux/stop_machine.h>
extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
@@ -34,48 +33,6 @@ struct alt_region {
struct alt_instr *end;
};
-/*
- * Decode the imm field of a b/bl instruction, and return the byte
- * offset as a signed value (so it can be used when computing a new
- * branch target).
- */
-static s32 get_branch_offset(u32 insn)
-{
- s32 imm = aarch64_insn_decode_immediate(AARCH64_INSN_IMM_26, insn);
-
- /* sign-extend the immediate before turning it into a byte offset */
- return (imm << 6) >> 4;
-}
-
-static u32 get_alt_insn(u8 *insnptr, u8 *altinsnptr)
-{
- u32 insn;
-
- aarch64_insn_read(altinsnptr, &insn);
-
- /* Stop the world on instructions we don't support... */
- BUG_ON(aarch64_insn_is_cbz(insn));
- BUG_ON(aarch64_insn_is_cbnz(insn));
- BUG_ON(aarch64_insn_is_bcond(insn));
- /* ... and there is probably more. */
-
- if (aarch64_insn_is_b(insn) || aarch64_insn_is_bl(insn)) {
- enum aarch64_insn_branch_type type;
- unsigned long target;
-
- if (aarch64_insn_is_b(insn))
- type = AARCH64_INSN_BRANCH_NOLINK;
- else
- type = AARCH64_INSN_BRANCH_LINK;
-
- target = (unsigned long)altinsnptr + get_branch_offset(insn);
- insn = aarch64_insn_gen_branch_imm((unsigned long)insnptr,
- target, type);
- }
-
- return insn;
-}
-
static int __apply_alternatives(void *alt_region)
{
struct alt_instr *alt;
@@ -83,9 +40,6 @@ static int __apply_alternatives(void *alt_region)
u8 *origptr, *replptr;
for (alt = region->begin; alt < region->end; alt++) {
- u32 insn;
- int i;
-
if (!cpus_have_cap(alt->cpufeature))
continue;
@@ -95,12 +49,7 @@ static int __apply_alternatives(void *alt_region)
origptr = (u8 *)&alt->orig_offset + alt->orig_offset;
replptr = (u8 *)&alt->alt_offset + alt->alt_offset;
-
- for (i = 0; i < alt->alt_len; i += sizeof(insn)) {
- insn = get_alt_insn(origptr + i, replptr + i);
- aarch64_insn_write(origptr + i, insn);
- }
-
+ memcpy(origptr, replptr, alt->alt_len);
flush_icache_range((uintptr_t)origptr,
(uintptr_t)(origptr + alt->alt_len));
}
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 195991dadc37..cce18c85d2e8 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -1310,11 +1310,16 @@ static const struct of_device_id armpmu_of_device_ids[] = {
static int armpmu_device_probe(struct platform_device *pdev)
{
- int i, *irqs;
+ int i, irq, *irqs;
if (!cpu_pmu)
return -ENODEV;
+ /* Don't bother with PPIs; they're already affine */
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0 && irq_is_percpu(irq))
+ return 0;
+
irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL);
if (!irqs)
return -ENOMEM;
@@ -1327,7 +1332,7 @@ static int armpmu_device_probe(struct platform_device *pdev)
i);
if (!dn) {
pr_warn("Failed to parse %s/interrupt-affinity[%d]\n",
- of_node_full_name(dn), i);
+ of_node_full_name(pdev->dev.of_node), i);
break;
}
diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
index ef7d112f5ce0..b0bd4e5fd5cf 100644
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -67,8 +67,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page, gfp_t flags)
*ret_page = phys_to_page(phys);
ptr = (void *)val;
- if (flags & __GFP_ZERO)
- memset(ptr, 0, size);
+ memset(ptr, 0, size);
}
return ptr;
@@ -105,7 +104,6 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
struct page *page;
void *addr;
- size = PAGE_ALIGN(size);
page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT,
get_order(size));
if (!page)
@@ -113,8 +111,7 @@ static void *__dma_alloc_coherent(struct device *dev, size_t size,
*dma_handle = phys_to_dma(dev, page_to_phys(page));
addr = page_address(page);
- if (flags & __GFP_ZERO)
- memset(addr, 0, size);
+ memset(addr, 0, size);
return addr;
} else {
return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
@@ -195,6 +192,8 @@ static void __dma_free(struct device *dev, size_t size,
{
void *swiotlb_addr = phys_to_virt(dma_to_phys(dev, dma_handle));
+ size = PAGE_ALIGN(size);
+
if (!is_device_dma_coherent(dev)) {
if (__free_from_pool(vaddr, size))
return;
diff --git a/arch/arm64/mm/dump.c b/arch/arm64/mm/dump.c
index 74c256744b25..f3d6221cd5bd 100644
--- a/arch/arm64/mm/dump.c
+++ b/arch/arm64/mm/dump.c
@@ -328,10 +328,12 @@ static int ptdump_init(void)
for (j = 0; j < pg_level[i].num; j++)
pg_level[i].mask |= pg_level[i].bits[j].mask;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
address_markers[VMEMMAP_START_NR].start_address =
(unsigned long)virt_to_page(PAGE_OFFSET);
address_markers[VMEMMAP_END_NR].start_address =
(unsigned long)virt_to_page(high_memory);
+#endif
pe = debugfs_create_file("kernel_page_tables", 0400, NULL, NULL,
&ptdump_fops);
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index edba042b2325..dc6a4842683a 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -487,7 +487,7 @@ emit_cond_jmp:
return -EINVAL;
}
- imm64 = (u64)insn1.imm << 32 | imm;
+ imm64 = (u64)insn1.imm << 32 | (u32)imm;
emit_a64_mov_i64(dst, imm64, ctx);
return 1;
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index ce7aea34fdf4..c18ddc74ef9a 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -45,7 +45,7 @@ static volatile unsigned long flushcache_cpumask = 0;
/*
* For flush_tlb_others()
*/
-static volatile cpumask_t flush_cpumask;
+static cpumask_t flush_cpumask;
static struct mm_struct *flush_mm;
static struct vm_area_struct *flush_vma;
static volatile unsigned long flush_va;
@@ -415,7 +415,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
*/
send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
- while (!cpumask_empty((cpumask_t*)&flush_cpumask)) {
+ while (!cpumask_empty(&flush_cpumask)) {
/* nothing. lockup detection does not belong here */
mb();
}
@@ -468,7 +468,7 @@ void smp_invalidate_interrupt(void)
__flush_tlb_page(va);
}
}
- cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask);
+ cpumask_clear_cpu(cpu_id, &flush_cpumask);
}
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 5200f649dd4e..ae2dd59050f7 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -277,7 +277,7 @@ LDFLAGS += -m $(ld-emul)
ifdef CONFIG_MIPS
CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
- sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/")
+ sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
ifdef CONFIG_64BIT
CHECKFLAGS += -m64
endif
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index a594d8ed9698..f19e890b99d2 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -304,7 +304,7 @@ do { \
\
current->thread.abi = &mips_abi; \
\
- current->thread.fpu.fcr31 = current_cpu_data.fpu_csr31; \
+ current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31; \
} while (0)
#endif /* CONFIG_32BIT */
@@ -366,7 +366,7 @@ do { \
else \
current->thread.abi = &mips_abi; \
\
- current->thread.fpu.fcr31 = current_cpu_data.fpu_csr31; \
+ current->thread.fpu.fcr31 = boot_cpu_data.fpu_csr31; \
\
p = personality(current->personality); \
if (p != PER_LINUX32 && p != PER_LINUX) \
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index bb02fac9b4fa..2b25d1ba1ea0 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -45,7 +45,7 @@ extern int __cpu_logical_map[NR_CPUS];
#define SMP_DUMP 0x8
#define SMP_ASK_C0COUNT 0x10
-extern volatile cpumask_t cpu_callin_map;
+extern cpumask_t cpu_callin_map;
/* Mask of CPUs which are currently definitely operating coherently */
extern cpumask_t cpu_coherent_mask;
diff --git a/arch/mips/kernel/elf.c b/arch/mips/kernel/elf.c
index be4899f3c393..4a4d9e067c89 100644
--- a/arch/mips/kernel/elf.c
+++ b/arch/mips/kernel/elf.c
@@ -76,14 +76,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
/* Lets see if this is an O32 ELF */
if (ehdr32->e_ident[EI_CLASS] == ELFCLASS32) {
- /* FR = 1 for N32 */
- if (ehdr32->e_flags & EF_MIPS_ABI2)
- state->overall_fp_mode = FP_FR1;
- else
- /* Set a good default FPU mode for O32 */
- state->overall_fp_mode = cpu_has_mips_r6 ?
- FP_FRE : FP_FR0;
-
if (ehdr32->e_flags & EF_MIPS_FP64) {
/*
* Set MIPS_ABI_FP_OLD_64 for EF_MIPS_FP64. We will override it
@@ -104,9 +96,6 @@ int arch_elf_pt_proc(void *_ehdr, void *_phdr, struct file *elf,
(char *)&abiflags,
sizeof(abiflags));
} else {
- /* FR=1 is really the only option for 64-bit */
- state->overall_fp_mode = FP_FR1;
-
if (phdr64->p_type != PT_MIPS_ABIFLAGS)
return 0;
if (phdr64->p_filesz < sizeof(abiflags))
@@ -137,6 +126,7 @@ int arch_check_elf(void *_ehdr, bool has_interpreter,
struct elf32_hdr *ehdr = _ehdr;
struct mode_req prog_req, interp_req;
int fp_abi, interp_fp_abi, abi0, abi1, max_abi;
+ bool is_mips64;
if (!config_enabled(CONFIG_MIPS_O32_FP64_SUPPORT))
return 0;
@@ -152,10 +142,22 @@ int arch_check_elf(void *_ehdr, bool has_interpreter,
abi0 = abi1 = fp_abi;
}
- /* ABI limits. O32 = FP_64A, N32/N64 = FP_SOFT */
- max_abi = ((ehdr->e_ident[EI_CLASS] == ELFCLASS32) &&
- (!(ehdr->e_flags & EF_MIPS_ABI2))) ?
- MIPS_ABI_FP_64A : MIPS_ABI_FP_SOFT;
+ is_mips64 = (ehdr->e_ident[EI_CLASS] == ELFCLASS64) ||
+ (ehdr->e_flags & EF_MIPS_ABI2);
+
+ if (is_mips64) {
+ /* MIPS64 code always uses FR=1, thus the default is easy */
+ state->overall_fp_mode = FP_FR1;
+
+ /* Disallow access to the various FPXX & FP64 ABIs */
+ max_abi = MIPS_ABI_FP_SOFT;
+ } else {
+ /* Default to a mode capable of running code expecting FR=0 */
+ state->overall_fp_mode = cpu_has_mips_r6 ? FP_FRE : FP_FR0;
+
+ /* Allow all ABIs we know about */
+ max_abi = MIPS_ABI_FP_64A;
+ }
if ((abi0 > max_abi && abi0 != MIPS_ABI_FP_UNKNOWN) ||
(abi1 > max_abi && abi1 != MIPS_ABI_FP_UNKNOWN))
diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c
index d544e774eea6..e933a309f2ea 100644
--- a/arch/mips/kernel/ptrace.c
+++ b/arch/mips/kernel/ptrace.c
@@ -176,7 +176,7 @@ int ptrace_setfpregs(struct task_struct *child, __u32 __user *data)
__get_user(value, data + 64);
fcr31 = child->thread.fpu.fcr31;
- mask = current_cpu_data.fpu_msk31;
+ mask = boot_cpu_data.fpu_msk31;
child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
/* FIR may not be written. */
diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c
index 7e011f95bb8e..4251d390b5b6 100644
--- a/arch/mips/kernel/smp-cps.c
+++ b/arch/mips/kernel/smp-cps.c
@@ -92,7 +92,7 @@ static void __init cps_smp_setup(void)
#ifdef CONFIG_MIPS_MT_FPAFF
/* If we have an FPU, enroll ourselves in the FPU-full mask */
if (cpu_has_fpu)
- cpu_set(0, mt_fpu_cpumask);
+ cpumask_set_cpu(0, &mt_fpu_cpumask);
#endif /* CONFIG_MIPS_MT_FPAFF */
}
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 193ace7955fb..faa46ebd9dda 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -43,7 +43,7 @@
#include <asm/time.h>
#include <asm/setup.h>
-volatile cpumask_t cpu_callin_map; /* Bitmask of started secondaries */
+cpumask_t cpu_callin_map; /* Bitmask of started secondaries */
int __cpu_number_map[NR_CPUS]; /* Map physical to logical */
EXPORT_SYMBOL(__cpu_number_map);
@@ -218,8 +218,10 @@ int __cpu_up(unsigned int cpu, struct task_struct *tidle)
/*
* Trust is futile. We should really have timeouts ...
*/
- while (!cpumask_test_cpu(cpu, &cpu_callin_map))
+ while (!cpumask_test_cpu(cpu, &cpu_callin_map)) {
udelay(100);
+ schedule();
+ }
synchronise_count_master(cpu);
return 0;
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index ba32e48d4697..d2d1c1933bc9 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -269,7 +269,6 @@ static void __show_regs(const struct pt_regs *regs)
*/
printk("epc : %0*lx %pS\n", field, regs->cp0_epc,
(void *) regs->cp0_epc);
- printk(" %s\n", print_tainted());
printk("ra : %0*lx %pS\n", field, regs->regs[31],
(void *) regs->regs[31]);
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index 6230f376a44e..4b50c5787e25 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -2389,7 +2389,6 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu,
{
unsigned long *gpr = &vcpu->arch.gprs[vcpu->arch.io_gpr];
enum emulation_result er = EMULATE_DONE;
- unsigned long curr_pc;
if (run->mmio.len > sizeof(*gpr)) {
kvm_err("Bad MMIO length: %d", run->mmio.len);
@@ -2397,11 +2396,6 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu,
goto done;
}
- /*
- * Update PC and hold onto current PC in case there is
- * an error and we want to rollback the PC
- */
- curr_pc = vcpu->arch.pc;
er = update_pc(vcpu, vcpu->arch.pending_load_cause);
if (er == EMULATE_FAIL)
return er;
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index d31c537ace1d..22b9b2cb9219 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -889,7 +889,7 @@ static inline void cop1_cfc(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
break;
case FPCREG_RID:
- value = current_cpu_data.fpu_id;
+ value = boot_cpu_data.fpu_id;
break;
default:
@@ -921,7 +921,7 @@ static inline void cop1_ctc(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
(void *)xcp->cp0_epc, MIPSInst_RT(ir), value);
/* Preserve read-only bits. */
- mask = current_cpu_data.fpu_msk31;
+ mask = boot_cpu_data.fpu_msk31;
fcr31 = (value & ~mask) | (fcr31 & mask);
break;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index a27a088e6f9f..08318ecb803a 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -495,7 +495,7 @@ static void r4k_tlb_configure(void)
if (cpu_has_rixi) {
/*
- * Enable the no read, no exec bits, and enable large virtual
+ * Enable the no read, no exec bits, and enable large physical
* address.
*/
#ifdef CONFIG_64BIT
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 0134db2ad0a8..5a2a82148d8d 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -130,9 +130,9 @@ struct platform_device ip32_rtc_device = {
.resource = ip32_rtc_resources,
};
-+static int __init sgio2_rtc_devinit(void)
+static __init int sgio2_rtc_devinit(void)
{
return platform_device_register(&ip32_rtc_device);
}
-device_initcall(sgio2_cmos_devinit);
+device_initcall(sgio2_rtc_devinit);
diff --git a/arch/parisc/include/asm/elf.h b/arch/parisc/include/asm/elf.h
index 3391d061eccc..78c9fd32c554 100644
--- a/arch/parisc/include/asm/elf.h
+++ b/arch/parisc/include/asm/elf.h
@@ -348,6 +348,10 @@ struct pt_regs; /* forward declaration... */
#define ELF_HWCAP 0
+#define STACK_RND_MASK (is_32bit_task() ? \
+ 0x7ff >> (PAGE_SHIFT - 12) : \
+ 0x3ffff >> (PAGE_SHIFT - 12))
+
struct mm_struct;
extern unsigned long arch_randomize_brk(struct mm_struct *);
#define arch_randomize_brk arch_randomize_brk
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 8a488c22a99f..809905a811ed 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -181,9 +181,12 @@ int dump_task_fpu (struct task_struct *tsk, elf_fpregset_t *r)
return 1;
}
+/*
+ * Copy architecture-specific thread state
+ */
int
copy_thread(unsigned long clone_flags, unsigned long usp,
- unsigned long arg, struct task_struct *p)
+ unsigned long kthread_arg, struct task_struct *p)
{
struct pt_regs *cregs = &(p->thread.regs);
void *stack = task_stack_page(p);
@@ -195,11 +198,10 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
extern void * const child_return;
if (unlikely(p->flags & PF_KTHREAD)) {
+ /* kernel thread */
memset(cregs, 0, sizeof(struct pt_regs));
if (!usp) /* idle thread */
return 0;
-
- /* kernel thread */
/* Must exit via ret_from_kernel_thread in order
* to call schedule_tail()
*/
@@ -215,7 +217,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
#else
cregs->gr[26] = usp;
#endif
- cregs->gr[25] = arg;
+ cregs->gr[25] = kthread_arg;
} else {
/* user thread */
/* usp must be word aligned. This also prevents users from
diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c
index e1ffea2f9a0b..5aba01ac457f 100644
--- a/arch/parisc/kernel/sys_parisc.c
+++ b/arch/parisc/kernel/sys_parisc.c
@@ -77,6 +77,9 @@ static unsigned long mmap_upper_limit(void)
if (stack_base > STACK_SIZE_MAX)
stack_base = STACK_SIZE_MAX;
+ /* Add space for stack randomization. */
+ stack_base += (STACK_RND_MASK << PAGE_SHIFT);
+
return PAGE_ALIGN(STACK_TOP - stack_base);
}
diff --git a/arch/powerpc/include/uapi/asm/tm.h b/arch/powerpc/include/uapi/asm/tm.h
index 5047659815a5..5d836b7c1176 100644
--- a/arch/powerpc/include/uapi/asm/tm.h
+++ b/arch/powerpc/include/uapi/asm/tm.h
@@ -11,7 +11,7 @@
#define TM_CAUSE_RESCHED 0xde
#define TM_CAUSE_TLBI 0xdc
#define TM_CAUSE_FAC_UNAV 0xda
-#define TM_CAUSE_SYSCALL 0xd8
+#define TM_CAUSE_SYSCALL 0xd8 /* future use */
#define TM_CAUSE_MISC 0xd6 /* future use */
#define TM_CAUSE_SIGNAL 0xd4
#define TM_CAUSE_ALIGNMENT 0xd2
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index 44b480e3a5af..9ee61d15653d 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -749,21 +749,24 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat
eeh_unfreeze_pe(pe, false);
eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
eeh_pe_dev_traverse(pe, eeh_restore_dev_state, dev);
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED);
break;
case pcie_hot_reset:
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
eeh_ops->reset(pe, EEH_RESET_HOT);
break;
case pcie_warm_reset:
+ eeh_pe_state_mark(pe, EEH_PE_ISOLATED);
eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
eeh_pe_dev_traverse(pe, eeh_disable_and_save_dev_state, dev);
eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
break;
default:
- eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
+ eeh_pe_state_clear(pe, EEH_PE_ISOLATED | EEH_PE_CFG_BLOCKED);
return -EINVAL;
};
@@ -1058,6 +1061,9 @@ void eeh_add_device_early(struct pci_dn *pdn)
if (!edev || !eeh_enabled())
return;
+ if (!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))
+ return;
+
/* USB Bus children of PCI devices will not have BUID's */
phb = edev->phb;
if (NULL == phb ||
@@ -1112,6 +1118,9 @@ void eeh_add_device_late(struct pci_dev *dev)
return;
}
+ if (eeh_has_flag(EEH_PROBE_MODE_DEV))
+ eeh_ops->probe(pdn, NULL);
+
/*
* The EEH cache might not be removed correctly because of
* unbalanced kref to the device during unplug time, which
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 8ca9434c40e6..afbc20019c2e 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -34,7 +34,6 @@
#include <asm/ftrace.h>
#include <asm/hw_irq.h>
#include <asm/context_tracking.h>
-#include <asm/tm.h>
/*
* System calls.
@@ -146,24 +145,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
andi. r11,r10,_TIF_SYSCALL_DOTRACE
bne syscall_dotrace
.Lsyscall_dotrace_cont:
-#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
-BEGIN_FTR_SECTION
- b 1f
-END_FTR_SECTION_IFCLR(CPU_FTR_TM)
- extrdi. r11, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
- beq+ 1f
-
- /* Doom the transaction and don't perform the syscall: */
- mfmsr r11
- li r12, 1
- rldimi r11, r12, MSR_TM_LG, 63-MSR_TM_LG
- mtmsrd r11, 0
- li r11, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
- TABORT(R11)
-
- b .Lsyscall_exit
-1:
-#endif
cmpldi 0,r0,NR_syscalls
bge- syscall_enosys
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index eeaa0d5f69d5..ccde8f084ce4 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -501,9 +501,11 @@ BEGIN_FTR_SECTION
CHECK_HMI_INTERRUPT
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
ld r1,PACAR1(r13)
+ ld r6,_CCR(r1)
ld r4,_MSR(r1)
ld r5,_NIP(r1)
addi r1,r1,INT_FRAME_SIZE
+ mtcr r6
mtspr SPRN_SRR1,r4
mtspr SPRN_SRR0,r5
rfid
diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c
index 15c99b649b04..b2eb4686bd8f 100644
--- a/arch/powerpc/kernel/mce.c
+++ b/arch/powerpc/kernel/mce.c
@@ -73,7 +73,7 @@ void save_mce_event(struct pt_regs *regs, long handled,
uint64_t nip, uint64_t addr)
{
uint64_t srr1;
- int index = __this_cpu_inc_return(mce_nest_count);
+ int index = __this_cpu_inc_return(mce_nest_count) - 1;
struct machine_check_event *mce = this_cpu_ptr(&mce_event[index]);
/*
@@ -184,7 +184,7 @@ void machine_check_queue_event(void)
if (!get_mce_event(&evt, MCE_EVENT_RELEASE))
return;
- index = __this_cpu_inc_return(mce_queue_count);
+ index = __this_cpu_inc_return(mce_queue_count) - 1;
/* If queue is full, just return for now. */
if (index >= MAX_MC_EVT) {
__this_cpu_dec(mce_queue_count);
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index f096e72262f4..1db685104ffc 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -213,6 +213,7 @@ SECTIONS
*(.opd)
}
+ . = ALIGN(256);
.got : AT(ADDR(.got) - LOAD_OFFSET) {
__toc_start = .;
#ifndef CONFIG_RELOCATABLE
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 48d3c5d2ecc9..df81caab7383 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1952,7 +1952,7 @@ static void post_guest_process(struct kvmppc_vcore *vc)
*/
static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
{
- struct kvm_vcpu *vcpu;
+ struct kvm_vcpu *vcpu, *vnext;
int i;
int srcu_idx;
@@ -1982,7 +1982,8 @@ static noinline void kvmppc_run_core(struct kvmppc_vcore *vc)
*/
if ((threads_per_core > 1) &&
((vc->num_threads > threads_per_subcore) || !on_primary_thread())) {
- list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
+ list_for_each_entry_safe(vcpu, vnext, &vc->runnable_threads,
+ arch.run_list) {
vcpu->arch.ret = -EBUSY;
kvmppc_remove_runnable(vc, vcpu);
wake_up(&vcpu->arch.cpu_run);
diff --git a/arch/powerpc/kvm/book3s_xics.c b/arch/powerpc/kvm/book3s_xics.c
index 8f3e6cc54d95..c6ca7db64673 100644
--- a/arch/powerpc/kvm/book3s_xics.c
+++ b/arch/powerpc/kvm/book3s_xics.c
@@ -12,6 +12,7 @@
#include <linux/err.h>
#include <linux/gfp.h>
#include <linux/anon_inodes.h>
+#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <asm/kvm_book3s.h>
@@ -20,7 +21,6 @@
#include <asm/xics.h>
#include <asm/debug.h>
#include <asm/time.h>
-#include <asm/spinlock.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 0ce968b00b7c..3385e3d0506e 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -689,27 +689,34 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb,
struct page *
follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
{
- pte_t *ptep;
- struct page *page;
+ pte_t *ptep, pte;
unsigned shift;
unsigned long mask, flags;
+ struct page *page = ERR_PTR(-EINVAL);
+
+ local_irq_save(flags);
+ ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift);
+ if (!ptep)
+ goto no_page;
+ pte = READ_ONCE(*ptep);
/*
+ * Verify it is a huge page else bail.
* Transparent hugepages are handled by generic code. We can skip them
* here.
*/
- local_irq_save(flags);
- ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift);
+ if (!shift || pmd_trans_huge(__pmd(pte_val(pte))))
+ goto no_page;
- /* Verify it is a huge page else bail. */
- if (!ptep || !shift || pmd_trans_huge(*(pmd_t *)ptep)) {
- local_irq_restore(flags);
- return ERR_PTR(-EINVAL);
+ if (!pte_present(pte)) {
+ page = NULL;
+ goto no_page;
}
mask = (1UL << shift) - 1;
- page = pte_page(*ptep);
+ page = pte_page(pte);
if (page)
page += (address & mask) / PAGE_SIZE;
+no_page:
local_irq_restore(flags);
return page;
}
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 59daa5eeec25..6bfadf1aa5cb 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -839,6 +839,17 @@ pmd_t pmdp_get_and_clear(struct mm_struct *mm,
* hash fault look at them.
*/
memset(pgtable, 0, PTE_FRAG_SIZE);
+ /*
+ * Serialize against find_linux_pte_or_hugepte which does lock-less
+ * lookup in page tables with local interrupts disabled. For huge pages
+ * it casts pmd_t to pte_t. Since format of pte_t is different from
+ * pmd_t we want to prevent transit from pmd pointing to page table
+ * to pmd pointing to huge page (and back) while interrupts are disabled.
+ * We clear pmd to possibly replace it with page table pointer in
+ * different code paths. So make sure we wait for the parallel
+ * find_linux_pte_or_hugepage to finish.
+ */
+ kick_all_cpus_sync();
return old_pmd;
}
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 920c252d1f49..f8bc950efcae 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -2693,7 +2693,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
hose->last_busno = 0xff;
}
hose->private_data = phb;
- hose->controller_ops = pnv_pci_controller_ops;
phb->hub_id = hub_id;
phb->opal_id = phb_id;
phb->type = ioda_type;
@@ -2812,6 +2811,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
pnv_pci_controller_ops.enable_device_hook = pnv_pci_enable_device_hook;
pnv_pci_controller_ops.window_alignment = pnv_pci_window_alignment;
pnv_pci_controller_ops.reset_secondary_bus = pnv_pci_reset_secondary_bus;
+ hose->controller_ops = pnv_pci_controller_ops;
#ifdef CONFIG_PCI_IOV
ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_iov_resources;
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index b4b11096ea8b..019d34aaf054 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -412,6 +412,10 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
if (rc)
return -EINVAL;
+ rc = dlpar_acquire_drc(drc_index);
+ if (rc)
+ return -EINVAL;
+
parent = of_find_node_by_path("/cpus");
if (!parent)
return -ENODEV;
@@ -422,12 +426,6 @@ static ssize_t dlpar_cpu_probe(const char *buf, size_t count)
of_node_put(parent);
- rc = dlpar_acquire_drc(drc_index);
- if (rc) {
- dlpar_free_cc_nodes(dn);
- return -EINVAL;
- }
-
rc = dlpar_attach_node(dn);
if (rc) {
dlpar_release_drc(drc_index);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 8e58c614c37d..b06dc3839268 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -115,7 +115,7 @@ config S390
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_ARCH_TRANSPARENT_HUGEPAGE
- select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z9_109_FEATURES
+ select HAVE_BPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
select HAVE_CMPXCHG_DOUBLE
select HAVE_CMPXCHG_LOCAL
select HAVE_DEBUG_KMEMLEAK
diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h
index ba3b2aefddf5..d9c4c313fbc6 100644
--- a/arch/s390/crypto/crypt_s390.h
+++ b/arch/s390/crypto/crypt_s390.h
@@ -3,9 +3,10 @@
*
* Support for s390 cryptographic instructions.
*
- * Copyright IBM Corp. 2003, 2007
+ * Copyright IBM Corp. 2003, 2015
* Author(s): Thomas Spatzier
* Jan Glauber (jan.glauber@de.ibm.com)
+ * Harald Freudenberger (freude@de.ibm.com)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
@@ -28,15 +29,17 @@
#define CRYPT_S390_MSA 0x1
#define CRYPT_S390_MSA3 0x2
#define CRYPT_S390_MSA4 0x4
+#define CRYPT_S390_MSA5 0x8
/* s390 cryptographic operations */
enum crypt_s390_operations {
- CRYPT_S390_KM = 0x0100,
- CRYPT_S390_KMC = 0x0200,
- CRYPT_S390_KIMD = 0x0300,
- CRYPT_S390_KLMD = 0x0400,
- CRYPT_S390_KMAC = 0x0500,
- CRYPT_S390_KMCTR = 0x0600
+ CRYPT_S390_KM = 0x0100,
+ CRYPT_S390_KMC = 0x0200,
+ CRYPT_S390_KIMD = 0x0300,
+ CRYPT_S390_KLMD = 0x0400,
+ CRYPT_S390_KMAC = 0x0500,
+ CRYPT_S390_KMCTR = 0x0600,
+ CRYPT_S390_PPNO = 0x0700
};
/*
@@ -138,6 +141,16 @@ enum crypt_s390_kmac_func {
KMAC_TDEA_192 = CRYPT_S390_KMAC | 3
};
+/*
+ * function codes for PPNO (PERFORM PSEUDORANDOM NUMBER
+ * OPERATION) instruction
+ */
+enum crypt_s390_ppno_func {
+ PPNO_QUERY = CRYPT_S390_PPNO | 0,
+ PPNO_SHA512_DRNG_GEN = CRYPT_S390_PPNO | 3,
+ PPNO_SHA512_DRNG_SEED = CRYPT_S390_PPNO | 0x83
+};
+
/**
* crypt_s390_km:
* @func: the function code passed to KM; see crypt_s390_km_func
@@ -162,11 +175,11 @@ static inline int crypt_s390_km(long func, void *param,
int ret;
asm volatile(
- "0: .insn rre,0xb92e0000,%3,%1 \n" /* KM opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb92e0000,%3,%1\n" /* KM opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
@@ -198,11 +211,11 @@ static inline int crypt_s390_kmc(long func, void *param,
int ret;
asm volatile(
- "0: .insn rre,0xb92f0000,%3,%1 \n" /* KMC opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb92f0000,%3,%1\n" /* KMC opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
@@ -233,11 +246,11 @@ static inline int crypt_s390_kimd(long func, void *param,
int ret;
asm volatile(
- "0: .insn rre,0xb93e0000,%1,%1 \n" /* KIMD opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb93e0000,%1,%1\n" /* KIMD opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
@@ -267,11 +280,11 @@ static inline int crypt_s390_klmd(long func, void *param,
int ret;
asm volatile(
- "0: .insn rre,0xb93f0000,%1,%1 \n" /* KLMD opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb93f0000,%1,%1\n" /* KLMD opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
@@ -302,11 +315,11 @@ static inline int crypt_s390_kmac(long func, void *param,
int ret;
asm volatile(
- "0: .insn rre,0xb91e0000,%1,%1 \n" /* KLAC opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb91e0000,%1,%1\n" /* KLAC opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len)
: "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
@@ -340,11 +353,11 @@ static inline int crypt_s390_kmctr(long func, void *param, u8 *dest,
int ret = -1;
asm volatile(
- "0: .insn rrf,0xb92d0000,%3,%1,%4,0 \n" /* KMCTR opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rrf,0xb92d0000,%3,%1,%4,0\n" /* KMCTR opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "+d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest),
"+a" (__ctr)
: "d" (__func), "a" (__param) : "cc", "memory");
@@ -354,6 +367,47 @@ static inline int crypt_s390_kmctr(long func, void *param, u8 *dest,
}
/**
+ * crypt_s390_ppno:
+ * @func: the function code passed to PPNO; see crypt_s390_ppno_func
+ * @param: address of parameter block; see POP for details on each func
+ * @dest: address of destination memory area
+ * @dest_len: size of destination memory area in bytes
+ * @seed: address of seed data
+ * @seed_len: size of seed data in bytes
+ *
+ * Executes the PPNO (PERFORM PSEUDORANDOM NUMBER OPERATION)
+ * operation of the CPU.
+ *
+ * Returns -1 for failure, 0 for the query func, number of random
+ * bytes stored in dest buffer for generate function
+ */
+static inline int crypt_s390_ppno(long func, void *param,
+ u8 *dest, long dest_len,
+ const u8 *seed, long seed_len)
+{
+ register long __func asm("0") = func & CRYPT_S390_FUNC_MASK;
+ register void *__param asm("1") = param; /* param block (240 bytes) */
+ register u8 *__dest asm("2") = dest; /* buf for recv random bytes */
+ register long __dest_len asm("3") = dest_len; /* requested random bytes */
+ register const u8 *__seed asm("4") = seed; /* buf with seed data */
+ register long __seed_len asm("5") = seed_len; /* bytes in seed buf */
+ int ret = -1;
+
+ asm volatile (
+ "0: .insn rre,0xb93c0000,%1,%5\n" /* PPNO opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
+ " la %0,0\n"
+ "2:\n"
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
+ : "+d" (ret), "+a"(__dest), "+d"(__dest_len)
+ : "d"(__func), "a"(__param), "a"(__seed), "d"(__seed_len)
+ : "cc", "memory");
+ if (ret < 0)
+ return ret;
+ return (func & CRYPT_S390_FUNC_MASK) ? dest_len - __dest_len : 0;
+}
+
+/**
* crypt_s390_func_available:
* @func: the function code of the specific function; 0 if op in general
*
@@ -373,6 +427,9 @@ static inline int crypt_s390_func_available(int func,
return 0;
if (facility_mask & CRYPT_S390_MSA4 && !test_facility(77))
return 0;
+ if (facility_mask & CRYPT_S390_MSA5 && !test_facility(57))
+ return 0;
+
switch (func & CRYPT_S390_OP_MASK) {
case CRYPT_S390_KM:
ret = crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0);
@@ -390,8 +447,12 @@ static inline int crypt_s390_func_available(int func,
ret = crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0);
break;
case CRYPT_S390_KMCTR:
- ret = crypt_s390_kmctr(KMCTR_QUERY, &status, NULL, NULL, 0,
- NULL);
+ ret = crypt_s390_kmctr(KMCTR_QUERY, &status,
+ NULL, NULL, 0, NULL);
+ break;
+ case CRYPT_S390_PPNO:
+ ret = crypt_s390_ppno(PPNO_QUERY, &status,
+ NULL, 0, NULL, 0);
break;
default:
return 0;
@@ -419,15 +480,14 @@ static inline int crypt_s390_pcc(long func, void *param)
int ret = -1;
asm volatile(
- "0: .insn rre,0xb92c0000,0,0 \n" /* PCC opcode */
- "1: brc 1,0b \n" /* handle partial completion */
+ "0: .insn rre,0xb92c0000,0,0\n" /* PCC opcode */
+ "1: brc 1,0b\n" /* handle partial completion */
" la %0,0\n"
"2:\n"
- EX_TABLE(0b,2b) EX_TABLE(1b,2b)
+ EX_TABLE(0b, 2b) EX_TABLE(1b, 2b)
: "+d" (ret)
: "d" (__func), "a" (__param) : "cc", "memory");
return ret;
}
-
#endif /* _CRYPTO_ARCH_S390_CRYPT_S390_H */
diff --git a/arch/s390/crypto/ghash_s390.c b/arch/s390/crypto/ghash_s390.c
index 7940dc90e80b..b258110da952 100644
--- a/arch/s390/crypto/ghash_s390.c
+++ b/arch/s390/crypto/ghash_s390.c
@@ -16,11 +16,12 @@
#define GHASH_DIGEST_SIZE 16
struct ghash_ctx {
- u8 icv[16];
- u8 key[16];
+ u8 key[GHASH_BLOCK_SIZE];
};
struct ghash_desc_ctx {
+ u8 icv[GHASH_BLOCK_SIZE];
+ u8 key[GHASH_BLOCK_SIZE];
u8 buffer[GHASH_BLOCK_SIZE];
u32 bytes;
};
@@ -28,8 +29,10 @@ struct ghash_desc_ctx {
static int ghash_init(struct shash_desc *desc)
{
struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
+ struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
memset(dctx, 0, sizeof(*dctx));
+ memcpy(dctx->key, ctx->key, GHASH_BLOCK_SIZE);
return 0;
}
@@ -45,7 +48,6 @@ static int ghash_setkey(struct crypto_shash *tfm,
}
memcpy(ctx->key, key, GHASH_BLOCK_SIZE);
- memset(ctx->icv, 0, GHASH_BLOCK_SIZE);
return 0;
}
@@ -54,7 +56,6 @@ static int ghash_update(struct shash_desc *desc,
const u8 *src, unsigned int srclen)
{
struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
- struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
unsigned int n;
u8 *buf = dctx->buffer;
int ret;
@@ -70,7 +71,7 @@ static int ghash_update(struct shash_desc *desc,
src += n;
if (!dctx->bytes) {
- ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf,
+ ret = crypt_s390_kimd(KIMD_GHASH, dctx, buf,
GHASH_BLOCK_SIZE);
if (ret != GHASH_BLOCK_SIZE)
return -EIO;
@@ -79,7 +80,7 @@ static int ghash_update(struct shash_desc *desc,
n = srclen & ~(GHASH_BLOCK_SIZE - 1);
if (n) {
- ret = crypt_s390_kimd(KIMD_GHASH, ctx, src, n);
+ ret = crypt_s390_kimd(KIMD_GHASH, dctx, src, n);
if (ret != n)
return -EIO;
src += n;
@@ -94,7 +95,7 @@ static int ghash_update(struct shash_desc *desc,
return 0;
}
-static int ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx)
+static int ghash_flush(struct ghash_desc_ctx *dctx)
{
u8 *buf = dctx->buffer;
int ret;
@@ -104,24 +105,24 @@ static int ghash_flush(struct ghash_ctx *ctx, struct ghash_desc_ctx *dctx)
memset(pos, 0, dctx->bytes);
- ret = crypt_s390_kimd(KIMD_GHASH, ctx, buf, GHASH_BLOCK_SIZE);
+ ret = crypt_s390_kimd(KIMD_GHASH, dctx, buf, GHASH_BLOCK_SIZE);
if (ret != GHASH_BLOCK_SIZE)
return -EIO;
+
+ dctx->bytes = 0;
}
- dctx->bytes = 0;
return 0;
}
static int ghash_final(struct shash_desc *desc, u8 *dst)
{
struct ghash_desc_ctx *dctx = shash_desc_ctx(desc);
- struct ghash_ctx *ctx = crypto_shash_ctx(desc->tfm);
int ret;
- ret = ghash_flush(ctx, dctx);
+ ret = ghash_flush(dctx);
if (!ret)
- memcpy(dst, ctx->icv, GHASH_BLOCK_SIZE);
+ memcpy(dst, dctx->icv, GHASH_BLOCK_SIZE);
return ret;
}
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index 94a35a4c1b48..9d5192c94963 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -1,106 +1,529 @@
/*
- * Copyright IBM Corp. 2006, 2007
+ * Copyright IBM Corp. 2006, 2015
* Author(s): Jan Glauber <jan.glauber@de.ibm.com>
+ * Harald Freudenberger <freude@de.ibm.com>
* Driver for the s390 pseudo random number generator
*/
+
+#define KMSG_COMPONENT "prng"
+#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
+
#include <linux/fs.h>
+#include <linux/fips.h>
#include <linux/init.h>
#include <linux/kernel.h>
+#include <linux/device.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/mutex.h>
#include <linux/random.h>
#include <linux/slab.h>
#include <asm/debug.h>
#include <asm/uaccess.h>
+#include <asm/timex.h>
#include "crypt_s390.h"
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jan Glauber <jan.glauber@de.ibm.com>");
+MODULE_AUTHOR("IBM Corporation");
MODULE_DESCRIPTION("s390 PRNG interface");
-static int prng_chunk_size = 256;
-module_param(prng_chunk_size, int, S_IRUSR | S_IRGRP | S_IROTH);
+
+#define PRNG_MODE_AUTO 0
+#define PRNG_MODE_TDES 1
+#define PRNG_MODE_SHA512 2
+
+static unsigned int prng_mode = PRNG_MODE_AUTO;
+module_param_named(mode, prng_mode, int, 0);
+MODULE_PARM_DESC(prng_mode, "PRNG mode: 0 - auto, 1 - TDES, 2 - SHA512");
+
+
+#define PRNG_CHUNKSIZE_TDES_MIN 8
+#define PRNG_CHUNKSIZE_TDES_MAX (64*1024)
+#define PRNG_CHUNKSIZE_SHA512_MIN 64
+#define PRNG_CHUNKSIZE_SHA512_MAX (64*1024)
+
+static unsigned int prng_chunk_size = 256;
+module_param_named(chunksize, prng_chunk_size, int, 0);
MODULE_PARM_DESC(prng_chunk_size, "PRNG read chunk size in bytes");
-static int prng_entropy_limit = 4096;
-module_param(prng_entropy_limit, int, S_IRUSR | S_IRGRP | S_IROTH | S_IWUSR);
-MODULE_PARM_DESC(prng_entropy_limit,
- "PRNG add entropy after that much bytes were produced");
+
+#define PRNG_RESEED_LIMIT_TDES 4096
+#define PRNG_RESEED_LIMIT_TDES_LOWER 4096
+#define PRNG_RESEED_LIMIT_SHA512 100000
+#define PRNG_RESEED_LIMIT_SHA512_LOWER 10000
+
+static unsigned int prng_reseed_limit;
+module_param_named(reseed_limit, prng_reseed_limit, int, 0);
+MODULE_PARM_DESC(prng_reseed_limit, "PRNG reseed limit");
+
/*
* Any one who considers arithmetical methods of producing random digits is,
* of course, in a state of sin. -- John von Neumann
*/
-struct s390_prng_data {
- unsigned long count; /* how many bytes were produced */
- char *buf;
+static int prng_errorflag;
+
+#define PRNG_GEN_ENTROPY_FAILED 1
+#define PRNG_SELFTEST_FAILED 2
+#define PRNG_INSTANTIATE_FAILED 3
+#define PRNG_SEED_FAILED 4
+#define PRNG_RESEED_FAILED 5
+#define PRNG_GEN_FAILED 6
+
+struct prng_ws_s {
+ u8 parm_block[32];
+ u32 reseed_counter;
+ u64 byte_counter;
};
-static struct s390_prng_data *p;
+struct ppno_ws_s {
+ u32 res;
+ u32 reseed_counter;
+ u64 stream_bytes;
+ u8 V[112];
+ u8 C[112];
+};
-/* copied from libica, use a non-zero initial parameter block */
-static unsigned char parm_block[32] = {
-0x0F,0x2B,0x8E,0x63,0x8C,0x8E,0xD2,0x52,0x64,0xB7,0xA0,0x7B,0x75,0x28,0xB8,0xF4,
-0x75,0x5F,0xD2,0xA6,0x8D,0x97,0x11,0xFF,0x49,0xD8,0x23,0xF3,0x7E,0x21,0xEC,0xA0,
+struct prng_data_s {
+ struct mutex mutex;
+ union {
+ struct prng_ws_s prngws;
+ struct ppno_ws_s ppnows;
+ };
+ u8 *buf;
+ u32 rest;
+ u8 *prev;
};
-static int prng_open(struct inode *inode, struct file *file)
+static struct prng_data_s *prng_data;
+
+/* initial parameter block for tdes mode, copied from libica */
+static const u8 initial_parm_block[32] __initconst = {
+ 0x0F, 0x2B, 0x8E, 0x63, 0x8C, 0x8E, 0xD2, 0x52,
+ 0x64, 0xB7, 0xA0, 0x7B, 0x75, 0x28, 0xB8, 0xF4,
+ 0x75, 0x5F, 0xD2, 0xA6, 0x8D, 0x97, 0x11, 0xFF,
+ 0x49, 0xD8, 0x23, 0xF3, 0x7E, 0x21, 0xEC, 0xA0 };
+
+
+/*** helper functions ***/
+
+static int generate_entropy(u8 *ebuf, size_t nbytes)
{
- return nonseekable_open(inode, file);
+ int n, ret = 0;
+ u8 *pg, *h, hash[32];
+
+ pg = (u8 *) __get_free_page(GFP_KERNEL);
+ if (!pg) {
+ prng_errorflag = PRNG_GEN_ENTROPY_FAILED;
+ return -ENOMEM;
+ }
+
+ while (nbytes) {
+ /* fill page with urandom bytes */
+ get_random_bytes(pg, PAGE_SIZE);
+ /* exor page with stckf values */
+ for (n = 0; n < PAGE_SIZE / sizeof(u64); n++) {
+ u64 *p = ((u64 *)pg) + n;
+ *p ^= get_tod_clock_fast();
+ }
+ n = (nbytes < sizeof(hash)) ? nbytes : sizeof(hash);
+ if (n < sizeof(hash))
+ h = hash;
+ else
+ h = ebuf;
+ /* generate sha256 from this page */
+ if (crypt_s390_kimd(KIMD_SHA_256, h,
+ pg, PAGE_SIZE) != PAGE_SIZE) {
+ prng_errorflag = PRNG_GEN_ENTROPY_FAILED;
+ ret = -EIO;
+ goto out;
+ }
+ if (n < sizeof(hash))
+ memcpy(ebuf, hash, n);
+ ret += n;
+ ebuf += n;
+ nbytes -= n;
+ }
+
+out:
+ free_page((unsigned long)pg);
+ return ret;
}
-static void prng_add_entropy(void)
+
+/*** tdes functions ***/
+
+static void prng_tdes_add_entropy(void)
{
__u64 entropy[4];
unsigned int i;
int ret;
for (i = 0; i < 16; i++) {
- ret = crypt_s390_kmc(KMC_PRNG, parm_block, (char *)entropy,
- (char *)entropy, sizeof(entropy));
+ ret = crypt_s390_kmc(KMC_PRNG, prng_data->prngws.parm_block,
+ (char *)entropy, (char *)entropy,
+ sizeof(entropy));
BUG_ON(ret < 0 || ret != sizeof(entropy));
- memcpy(parm_block, entropy, sizeof(entropy));
+ memcpy(prng_data->prngws.parm_block, entropy, sizeof(entropy));
}
}
-static void prng_seed(int nbytes)
+
+static void prng_tdes_seed(int nbytes)
{
char buf[16];
int i = 0;
- BUG_ON(nbytes > 16);
+ BUG_ON(nbytes > sizeof(buf));
+
get_random_bytes(buf, nbytes);
/* Add the entropy */
while (nbytes >= 8) {
- *((__u64 *)parm_block) ^= *((__u64 *)(buf+i));
- prng_add_entropy();
+ *((__u64 *)prng_data->prngws.parm_block) ^= *((__u64 *)(buf+i));
+ prng_tdes_add_entropy();
i += 8;
nbytes -= 8;
}
- prng_add_entropy();
+ prng_tdes_add_entropy();
+ prng_data->prngws.reseed_counter = 0;
+}
+
+
+static int __init prng_tdes_instantiate(void)
+{
+ int datalen;
+
+ pr_debug("prng runs in TDES mode with "
+ "chunksize=%d and reseed_limit=%u\n",
+ prng_chunk_size, prng_reseed_limit);
+
+ /* memory allocation, prng_data struct init, mutex init */
+ datalen = sizeof(struct prng_data_s) + prng_chunk_size;
+ prng_data = kzalloc(datalen, GFP_KERNEL);
+ if (!prng_data) {
+ prng_errorflag = PRNG_INSTANTIATE_FAILED;
+ return -ENOMEM;
+ }
+ mutex_init(&prng_data->mutex);
+ prng_data->buf = ((u8 *)prng_data) + sizeof(struct prng_data_s);
+ memcpy(prng_data->prngws.parm_block, initial_parm_block, 32);
+
+ /* initialize the PRNG, add 128 bits of entropy */
+ prng_tdes_seed(16);
+
+ return 0;
}
-static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes,
- loff_t *ppos)
+
+static void prng_tdes_deinstantiate(void)
+{
+ pr_debug("The prng module stopped "
+ "after running in triple DES mode\n");
+ kzfree(prng_data);
+}
+
+
+/*** sha512 functions ***/
+
+static int __init prng_sha512_selftest(void)
{
- int chunk, n;
+ /* NIST DRBG testvector for Hash Drbg, Sha-512, Count #0 */
+ static const u8 seed[] __initconst = {
+ 0x6b, 0x50, 0xa7, 0xd8, 0xf8, 0xa5, 0x5d, 0x7a,
+ 0x3d, 0xf8, 0xbb, 0x40, 0xbc, 0xc3, 0xb7, 0x22,
+ 0xd8, 0x70, 0x8d, 0xe6, 0x7f, 0xda, 0x01, 0x0b,
+ 0x03, 0xc4, 0xc8, 0x4d, 0x72, 0x09, 0x6f, 0x8c,
+ 0x3e, 0xc6, 0x49, 0xcc, 0x62, 0x56, 0xd9, 0xfa,
+ 0x31, 0xdb, 0x7a, 0x29, 0x04, 0xaa, 0xf0, 0x25 };
+ static const u8 V0[] __initconst = {
+ 0x00, 0xad, 0xe3, 0x6f, 0x9a, 0x01, 0xc7, 0x76,
+ 0x61, 0x34, 0x35, 0xf5, 0x4e, 0x24, 0x74, 0x22,
+ 0x21, 0x9a, 0x29, 0x89, 0xc7, 0x93, 0x2e, 0x60,
+ 0x1e, 0xe8, 0x14, 0x24, 0x8d, 0xd5, 0x03, 0xf1,
+ 0x65, 0x5d, 0x08, 0x22, 0x72, 0xd5, 0xad, 0x95,
+ 0xe1, 0x23, 0x1e, 0x8a, 0xa7, 0x13, 0xd9, 0x2b,
+ 0x5e, 0xbc, 0xbb, 0x80, 0xab, 0x8d, 0xe5, 0x79,
+ 0xab, 0x5b, 0x47, 0x4e, 0xdd, 0xee, 0x6b, 0x03,
+ 0x8f, 0x0f, 0x5c, 0x5e, 0xa9, 0x1a, 0x83, 0xdd,
+ 0xd3, 0x88, 0xb2, 0x75, 0x4b, 0xce, 0x83, 0x36,
+ 0x57, 0x4b, 0xf1, 0x5c, 0xca, 0x7e, 0x09, 0xc0,
+ 0xd3, 0x89, 0xc6, 0xe0, 0xda, 0xc4, 0x81, 0x7e,
+ 0x5b, 0xf9, 0xe1, 0x01, 0xc1, 0x92, 0x05, 0xea,
+ 0xf5, 0x2f, 0xc6, 0xc6, 0xc7, 0x8f, 0xbc, 0xf4 };
+ static const u8 C0[] __initconst = {
+ 0x00, 0xf4, 0xa3, 0xe5, 0xa0, 0x72, 0x63, 0x95,
+ 0xc6, 0x4f, 0x48, 0xd0, 0x8b, 0x5b, 0x5f, 0x8e,
+ 0x6b, 0x96, 0x1f, 0x16, 0xed, 0xbc, 0x66, 0x94,
+ 0x45, 0x31, 0xd7, 0x47, 0x73, 0x22, 0xa5, 0x86,
+ 0xce, 0xc0, 0x4c, 0xac, 0x63, 0xb8, 0x39, 0x50,
+ 0xbf, 0xe6, 0x59, 0x6c, 0x38, 0x58, 0x99, 0x1f,
+ 0x27, 0xa7, 0x9d, 0x71, 0x2a, 0xb3, 0x7b, 0xf9,
+ 0xfb, 0x17, 0x86, 0xaa, 0x99, 0x81, 0xaa, 0x43,
+ 0xe4, 0x37, 0xd3, 0x1e, 0x6e, 0xe5, 0xe6, 0xee,
+ 0xc2, 0xed, 0x95, 0x4f, 0x53, 0x0e, 0x46, 0x8a,
+ 0xcc, 0x45, 0xa5, 0xdb, 0x69, 0x0d, 0x81, 0xc9,
+ 0x32, 0x92, 0xbc, 0x8f, 0x33, 0xe6, 0xf6, 0x09,
+ 0x7c, 0x8e, 0x05, 0x19, 0x0d, 0xf1, 0xb6, 0xcc,
+ 0xf3, 0x02, 0x21, 0x90, 0x25, 0xec, 0xed, 0x0e };
+ static const u8 random[] __initconst = {
+ 0x95, 0xb7, 0xf1, 0x7e, 0x98, 0x02, 0xd3, 0x57,
+ 0x73, 0x92, 0xc6, 0xa9, 0xc0, 0x80, 0x83, 0xb6,
+ 0x7d, 0xd1, 0x29, 0x22, 0x65, 0xb5, 0xf4, 0x2d,
+ 0x23, 0x7f, 0x1c, 0x55, 0xbb, 0x9b, 0x10, 0xbf,
+ 0xcf, 0xd8, 0x2c, 0x77, 0xa3, 0x78, 0xb8, 0x26,
+ 0x6a, 0x00, 0x99, 0x14, 0x3b, 0x3c, 0x2d, 0x64,
+ 0x61, 0x1e, 0xee, 0xb6, 0x9a, 0xcd, 0xc0, 0x55,
+ 0x95, 0x7c, 0x13, 0x9e, 0x8b, 0x19, 0x0c, 0x7a,
+ 0x06, 0x95, 0x5f, 0x2c, 0x79, 0x7c, 0x27, 0x78,
+ 0xde, 0x94, 0x03, 0x96, 0xa5, 0x01, 0xf4, 0x0e,
+ 0x91, 0x39, 0x6a, 0xcf, 0x8d, 0x7e, 0x45, 0xeb,
+ 0xdb, 0xb5, 0x3b, 0xbf, 0x8c, 0x97, 0x52, 0x30,
+ 0xd2, 0xf0, 0xff, 0x91, 0x06, 0xc7, 0x61, 0x19,
+ 0xae, 0x49, 0x8e, 0x7f, 0xbc, 0x03, 0xd9, 0x0f,
+ 0x8e, 0x4c, 0x51, 0x62, 0x7a, 0xed, 0x5c, 0x8d,
+ 0x42, 0x63, 0xd5, 0xd2, 0xb9, 0x78, 0x87, 0x3a,
+ 0x0d, 0xe5, 0x96, 0xee, 0x6d, 0xc7, 0xf7, 0xc2,
+ 0x9e, 0x37, 0xee, 0xe8, 0xb3, 0x4c, 0x90, 0xdd,
+ 0x1c, 0xf6, 0xa9, 0xdd, 0xb2, 0x2b, 0x4c, 0xbd,
+ 0x08, 0x6b, 0x14, 0xb3, 0x5d, 0xe9, 0x3d, 0xa2,
+ 0xd5, 0xcb, 0x18, 0x06, 0x69, 0x8c, 0xbd, 0x7b,
+ 0xbb, 0x67, 0xbf, 0xe3, 0xd3, 0x1f, 0xd2, 0xd1,
+ 0xdb, 0xd2, 0xa1, 0xe0, 0x58, 0xa3, 0xeb, 0x99,
+ 0xd7, 0xe5, 0x1f, 0x1a, 0x93, 0x8e, 0xed, 0x5e,
+ 0x1c, 0x1d, 0xe2, 0x3a, 0x6b, 0x43, 0x45, 0xd3,
+ 0x19, 0x14, 0x09, 0xf9, 0x2f, 0x39, 0xb3, 0x67,
+ 0x0d, 0x8d, 0xbf, 0xb6, 0x35, 0xd8, 0xe6, 0xa3,
+ 0x69, 0x32, 0xd8, 0x10, 0x33, 0xd1, 0x44, 0x8d,
+ 0x63, 0xb4, 0x03, 0xdd, 0xf8, 0x8e, 0x12, 0x1b,
+ 0x6e, 0x81, 0x9a, 0xc3, 0x81, 0x22, 0x6c, 0x13,
+ 0x21, 0xe4, 0xb0, 0x86, 0x44, 0xf6, 0x72, 0x7c,
+ 0x36, 0x8c, 0x5a, 0x9f, 0x7a, 0x4b, 0x3e, 0xe2 };
+
int ret = 0;
- int tmp;
+ u8 buf[sizeof(random)];
+ struct ppno_ws_s ws;
+
+ memset(&ws, 0, sizeof(ws));
+
+ /* initial seed */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_SEED,
+ &ws, NULL, 0,
+ seed, sizeof(seed));
+ if (ret < 0) {
+ pr_err("The prng self test seed operation for the "
+ "SHA-512 mode failed with rc=%d\n", ret);
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+
+ /* check working states V and C */
+ if (memcmp(ws.V, V0, sizeof(V0)) != 0
+ || memcmp(ws.C, C0, sizeof(C0)) != 0) {
+ pr_err("The prng self test state test "
+ "for the SHA-512 mode failed\n");
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+
+ /* generate random bytes */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+ &ws, buf, sizeof(buf),
+ NULL, 0);
+ if (ret < 0) {
+ pr_err("The prng self test generate operation for "
+ "the SHA-512 mode failed with rc=%d\n", ret);
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+ &ws, buf, sizeof(buf),
+ NULL, 0);
+ if (ret < 0) {
+ pr_err("The prng self test generate operation for "
+ "the SHA-512 mode failed with rc=%d\n", ret);
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+
+ /* check against expected data */
+ if (memcmp(buf, random, sizeof(random)) != 0) {
+ pr_err("The prng self test data test "
+ "for the SHA-512 mode failed\n");
+ prng_errorflag = PRNG_SELFTEST_FAILED;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+static int __init prng_sha512_instantiate(void)
+{
+ int ret, datalen;
+ u8 seed[64];
+
+ pr_debug("prng runs in SHA-512 mode "
+ "with chunksize=%d and reseed_limit=%u\n",
+ prng_chunk_size, prng_reseed_limit);
+
+ /* memory allocation, prng_data struct init, mutex init */
+ datalen = sizeof(struct prng_data_s) + prng_chunk_size;
+ if (fips_enabled)
+ datalen += prng_chunk_size;
+ prng_data = kzalloc(datalen, GFP_KERNEL);
+ if (!prng_data) {
+ prng_errorflag = PRNG_INSTANTIATE_FAILED;
+ return -ENOMEM;
+ }
+ mutex_init(&prng_data->mutex);
+ prng_data->buf = ((u8 *)prng_data) + sizeof(struct prng_data_s);
+
+ /* selftest */
+ ret = prng_sha512_selftest();
+ if (ret)
+ goto outfree;
+
+ /* generate initial seed bytestring, first 48 bytes of entropy */
+ ret = generate_entropy(seed, 48);
+ if (ret != 48)
+ goto outfree;
+ /* followed by 16 bytes of unique nonce */
+ get_tod_clock_ext(seed + 48);
+
+ /* initial seed of the ppno drng */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_SEED,
+ &prng_data->ppnows, NULL, 0,
+ seed, sizeof(seed));
+ if (ret < 0) {
+ prng_errorflag = PRNG_SEED_FAILED;
+ ret = -EIO;
+ goto outfree;
+ }
+
+ /* if fips mode is enabled, generate a first block of random
+ bytes for the FIPS 140-2 Conditional Self Test */
+ if (fips_enabled) {
+ prng_data->prev = prng_data->buf + prng_chunk_size;
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+ &prng_data->ppnows,
+ prng_data->prev,
+ prng_chunk_size,
+ NULL, 0);
+ if (ret < 0 || ret != prng_chunk_size) {
+ prng_errorflag = PRNG_GEN_FAILED;
+ ret = -EIO;
+ goto outfree;
+ }
+ }
+
+ return 0;
+
+outfree:
+ kfree(prng_data);
+ return ret;
+}
+
+
+static void prng_sha512_deinstantiate(void)
+{
+ pr_debug("The prng module stopped after running in SHA-512 mode\n");
+ kzfree(prng_data);
+}
+
+
+static int prng_sha512_reseed(void)
+{
+ int ret;
+ u8 seed[32];
+
+ /* generate 32 bytes of fresh entropy */
+ ret = generate_entropy(seed, sizeof(seed));
+ if (ret != sizeof(seed))
+ return ret;
+
+ /* do a reseed of the ppno drng with this bytestring */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_SEED,
+ &prng_data->ppnows, NULL, 0,
+ seed, sizeof(seed));
+ if (ret) {
+ prng_errorflag = PRNG_RESEED_FAILED;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+
+static int prng_sha512_generate(u8 *buf, size_t nbytes)
+{
+ int ret;
+
+ /* reseed needed ? */
+ if (prng_data->ppnows.reseed_counter > prng_reseed_limit) {
+ ret = prng_sha512_reseed();
+ if (ret)
+ return ret;
+ }
+
+ /* PPNO generate */
+ ret = crypt_s390_ppno(PPNO_SHA512_DRNG_GEN,
+ &prng_data->ppnows, buf, nbytes,
+ NULL, 0);
+ if (ret < 0 || ret != nbytes) {
+ prng_errorflag = PRNG_GEN_FAILED;
+ return -EIO;
+ }
+
+ /* FIPS 140-2 Conditional Self Test */
+ if (fips_enabled) {
+ if (!memcmp(prng_data->prev, buf, nbytes)) {
+ prng_errorflag = PRNG_GEN_FAILED;
+ return -EILSEQ;
+ }
+ memcpy(prng_data->prev, buf, nbytes);
+ }
+
+ return ret;
+}
+
+
+/*** file io functions ***/
+
+static int prng_open(struct inode *inode, struct file *file)
+{
+ return nonseekable_open(inode, file);
+}
+
+
+static ssize_t prng_tdes_read(struct file *file, char __user *ubuf,
+ size_t nbytes, loff_t *ppos)
+{
+ int chunk, n, tmp, ret = 0;
+
+ /* lock prng_data struct */
+ if (mutex_lock_interruptible(&prng_data->mutex))
+ return -ERESTARTSYS;
- /* nbytes can be arbitrary length, we split it into chunks */
while (nbytes) {
- /* same as in extract_entropy_user in random.c */
if (need_resched()) {
if (signal_pending(current)) {
if (ret == 0)
ret = -ERESTARTSYS;
break;
}
+ /* give mutex free before calling schedule() */
+ mutex_unlock(&prng_data->mutex);
schedule();
+ /* occopy mutex again */
+ if (mutex_lock_interruptible(&prng_data->mutex)) {
+ if (ret == 0)
+ ret = -ERESTARTSYS;
+ return ret;
+ }
}
/*
@@ -112,12 +535,11 @@ static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes,
/* PRNG only likes multiples of 8 bytes */
n = (chunk + 7) & -8;
- if (p->count > prng_entropy_limit)
- prng_seed(8);
+ if (prng_data->prngws.reseed_counter > prng_reseed_limit)
+ prng_tdes_seed(8);
/* if the CPU supports PRNG stckf is present too */
- asm volatile(".insn s,0xb27c0000,%0"
- : "=m" (*((unsigned long long *)p->buf)) : : "cc");
+ *((unsigned long long *)prng_data->buf) = get_tod_clock_fast();
/*
* Beside the STCKF the input for the TDES-EDE is the output
@@ -132,35 +554,259 @@ static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes,
* Note: you can still get strict X9.17 conformity by setting
* prng_chunk_size to 8 bytes.
*/
- tmp = crypt_s390_kmc(KMC_PRNG, parm_block, p->buf, p->buf, n);
- BUG_ON((tmp < 0) || (tmp != n));
+ tmp = crypt_s390_kmc(KMC_PRNG, prng_data->prngws.parm_block,
+ prng_data->buf, prng_data->buf, n);
+ if (tmp < 0 || tmp != n) {
+ ret = -EIO;
+ break;
+ }
- p->count += n;
+ prng_data->prngws.byte_counter += n;
+ prng_data->prngws.reseed_counter += n;
- if (copy_to_user(ubuf, p->buf, chunk))
+ if (copy_to_user(ubuf, prng_data->buf, chunk))
return -EFAULT;
nbytes -= chunk;
ret += chunk;
ubuf += chunk;
}
+
+ /* unlock prng_data struct */
+ mutex_unlock(&prng_data->mutex);
+
return ret;
}
-static const struct file_operations prng_fops = {
+
+static ssize_t prng_sha512_read(struct file *file, char __user *ubuf,
+ size_t nbytes, loff_t *ppos)
+{
+ int n, ret = 0;
+ u8 *p;
+
+ /* if errorflag is set do nothing and return 'broken pipe' */
+ if (prng_errorflag)
+ return -EPIPE;
+
+ /* lock prng_data struct */
+ if (mutex_lock_interruptible(&prng_data->mutex))
+ return -ERESTARTSYS;
+
+ while (nbytes) {
+ if (need_resched()) {
+ if (signal_pending(current)) {
+ if (ret == 0)
+ ret = -ERESTARTSYS;
+ break;
+ }
+ /* give mutex free before calling schedule() */
+ mutex_unlock(&prng_data->mutex);
+ schedule();
+ /* occopy mutex again */
+ if (mutex_lock_interruptible(&prng_data->mutex)) {
+ if (ret == 0)
+ ret = -ERESTARTSYS;
+ return ret;
+ }
+ }
+ if (prng_data->rest) {
+ /* push left over random bytes from the previous read */
+ p = prng_data->buf + prng_chunk_size - prng_data->rest;
+ n = (nbytes < prng_data->rest) ?
+ nbytes : prng_data->rest;
+ prng_data->rest -= n;
+ } else {
+ /* generate one chunk of random bytes into read buf */
+ p = prng_data->buf;
+ n = prng_sha512_generate(p, prng_chunk_size);
+ if (n < 0) {
+ ret = n;
+ break;
+ }
+ if (nbytes < prng_chunk_size) {
+ n = nbytes;
+ prng_data->rest = prng_chunk_size - n;
+ } else {
+ n = prng_chunk_size;
+ prng_data->rest = 0;
+ }
+ }
+ if (copy_to_user(ubuf, p, n)) {
+ ret = -EFAULT;
+ break;
+ }
+ ubuf += n;
+ nbytes -= n;
+ ret += n;
+ }
+
+ /* unlock prng_data struct */
+ mutex_unlock(&prng_data->mutex);
+
+ return ret;
+}
+
+
+/*** sysfs stuff ***/
+
+static const struct file_operations prng_sha512_fops = {
+ .owner = THIS_MODULE,
+ .open = &prng_open,
+ .release = NULL,
+ .read = &prng_sha512_read,
+ .llseek = noop_llseek,
+};
+static const struct file_operations prng_tdes_fops = {
.owner = THIS_MODULE,
.open = &prng_open,
.release = NULL,
- .read = &prng_read,
+ .read = &prng_tdes_read,
.llseek = noop_llseek,
};
-static struct miscdevice prng_dev = {
+static struct miscdevice prng_sha512_dev = {
+ .name = "prandom",
+ .minor = MISC_DYNAMIC_MINOR,
+ .fops = &prng_sha512_fops,
+};
+static struct miscdevice prng_tdes_dev = {
.name = "prandom",
.minor = MISC_DYNAMIC_MINOR,
- .fops = &prng_fops,
+ .fops = &prng_tdes_fops,
};
+
+/* chunksize attribute (ro) */
+static ssize_t prng_chunksize_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%u\n", prng_chunk_size);
+}
+static DEVICE_ATTR(chunksize, 0444, prng_chunksize_show, NULL);
+
+/* counter attribute (ro) */
+static ssize_t prng_counter_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ u64 counter;
+
+ if (mutex_lock_interruptible(&prng_data->mutex))
+ return -ERESTARTSYS;
+ if (prng_mode == PRNG_MODE_SHA512)
+ counter = prng_data->ppnows.stream_bytes;
+ else
+ counter = prng_data->prngws.byte_counter;
+ mutex_unlock(&prng_data->mutex);
+
+ return snprintf(buf, PAGE_SIZE, "%llu\n", counter);
+}
+static DEVICE_ATTR(byte_counter, 0444, prng_counter_show, NULL);
+
+/* errorflag attribute (ro) */
+static ssize_t prng_errorflag_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%d\n", prng_errorflag);
+}
+static DEVICE_ATTR(errorflag, 0444, prng_errorflag_show, NULL);
+
+/* mode attribute (ro) */
+static ssize_t prng_mode_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ if (prng_mode == PRNG_MODE_TDES)
+ return snprintf(buf, PAGE_SIZE, "TDES\n");
+ else
+ return snprintf(buf, PAGE_SIZE, "SHA512\n");
+}
+static DEVICE_ATTR(mode, 0444, prng_mode_show, NULL);
+
+/* reseed attribute (w) */
+static ssize_t prng_reseed_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ if (mutex_lock_interruptible(&prng_data->mutex))
+ return -ERESTARTSYS;
+ prng_sha512_reseed();
+ mutex_unlock(&prng_data->mutex);
+
+ return count;
+}
+static DEVICE_ATTR(reseed, 0200, NULL, prng_reseed_store);
+
+/* reseed limit attribute (rw) */
+static ssize_t prng_reseed_limit_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%u\n", prng_reseed_limit);
+}
+static ssize_t prng_reseed_limit_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned limit;
+
+ if (sscanf(buf, "%u\n", &limit) != 1)
+ return -EINVAL;
+
+ if (prng_mode == PRNG_MODE_SHA512) {
+ if (limit < PRNG_RESEED_LIMIT_SHA512_LOWER)
+ return -EINVAL;
+ } else {
+ if (limit < PRNG_RESEED_LIMIT_TDES_LOWER)
+ return -EINVAL;
+ }
+
+ prng_reseed_limit = limit;
+
+ return count;
+}
+static DEVICE_ATTR(reseed_limit, 0644,
+ prng_reseed_limit_show, prng_reseed_limit_store);
+
+/* strength attribute (ro) */
+static ssize_t prng_strength_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "256\n");
+}
+static DEVICE_ATTR(strength, 0444, prng_strength_show, NULL);
+
+static struct attribute *prng_sha512_dev_attrs[] = {
+ &dev_attr_errorflag.attr,
+ &dev_attr_chunksize.attr,
+ &dev_attr_byte_counter.attr,
+ &dev_attr_mode.attr,
+ &dev_attr_reseed.attr,
+ &dev_attr_reseed_limit.attr,
+ &dev_attr_strength.attr,
+ NULL
+};
+static struct attribute *prng_tdes_dev_attrs[] = {
+ &dev_attr_chunksize.attr,
+ &dev_attr_byte_counter.attr,
+ &dev_attr_mode.attr,
+ NULL
+};
+
+static struct attribute_group prng_sha512_dev_attr_group = {
+ .attrs = prng_sha512_dev_attrs
+};
+static struct attribute_group prng_tdes_dev_attr_group = {
+ .attrs = prng_tdes_dev_attrs
+};
+
+
+/*** module init and exit ***/
+
static int __init prng_init(void)
{
int ret;
@@ -169,43 +815,105 @@ static int __init prng_init(void)
if (!crypt_s390_func_available(KMC_PRNG, CRYPT_S390_MSA))
return -EOPNOTSUPP;
- if (prng_chunk_size < 8)
- return -EINVAL;
+ /* choose prng mode */
+ if (prng_mode != PRNG_MODE_TDES) {
+ /* check for MSA5 support for PPNO operations */
+ if (!crypt_s390_func_available(PPNO_SHA512_DRNG_GEN,
+ CRYPT_S390_MSA5)) {
+ if (prng_mode == PRNG_MODE_SHA512) {
+ pr_err("The prng module cannot "
+ "start in SHA-512 mode\n");
+ return -EOPNOTSUPP;
+ }
+ prng_mode = PRNG_MODE_TDES;
+ } else
+ prng_mode = PRNG_MODE_SHA512;
+ }
- p = kmalloc(sizeof(struct s390_prng_data), GFP_KERNEL);
- if (!p)
- return -ENOMEM;
- p->count = 0;
+ if (prng_mode == PRNG_MODE_SHA512) {
- p->buf = kmalloc(prng_chunk_size, GFP_KERNEL);
- if (!p->buf) {
- ret = -ENOMEM;
- goto out_free;
- }
+ /* SHA512 mode */
- /* initialize the PRNG, add 128 bits of entropy */
- prng_seed(16);
+ if (prng_chunk_size < PRNG_CHUNKSIZE_SHA512_MIN
+ || prng_chunk_size > PRNG_CHUNKSIZE_SHA512_MAX)
+ return -EINVAL;
+ prng_chunk_size = (prng_chunk_size + 0x3f) & ~0x3f;
- ret = misc_register(&prng_dev);
- if (ret)
- goto out_buf;
- return 0;
+ if (prng_reseed_limit == 0)
+ prng_reseed_limit = PRNG_RESEED_LIMIT_SHA512;
+ else if (prng_reseed_limit < PRNG_RESEED_LIMIT_SHA512_LOWER)
+ return -EINVAL;
+
+ ret = prng_sha512_instantiate();
+ if (ret)
+ goto out;
+
+ ret = misc_register(&prng_sha512_dev);
+ if (ret) {
+ prng_sha512_deinstantiate();
+ goto out;
+ }
+ ret = sysfs_create_group(&prng_sha512_dev.this_device->kobj,
+ &prng_sha512_dev_attr_group);
+ if (ret) {
+ misc_deregister(&prng_sha512_dev);
+ prng_sha512_deinstantiate();
+ goto out;
+ }
-out_buf:
- kfree(p->buf);
-out_free:
- kfree(p);
+ } else {
+
+ /* TDES mode */
+
+ if (prng_chunk_size < PRNG_CHUNKSIZE_TDES_MIN
+ || prng_chunk_size > PRNG_CHUNKSIZE_TDES_MAX)
+ return -EINVAL;
+ prng_chunk_size = (prng_chunk_size + 0x07) & ~0x07;
+
+ if (prng_reseed_limit == 0)
+ prng_reseed_limit = PRNG_RESEED_LIMIT_TDES;
+ else if (prng_reseed_limit < PRNG_RESEED_LIMIT_TDES_LOWER)
+ return -EINVAL;
+
+ ret = prng_tdes_instantiate();
+ if (ret)
+ goto out;
+
+ ret = misc_register(&prng_tdes_dev);
+ if (ret) {
+ prng_tdes_deinstantiate();
+ goto out;
+ }
+ ret = sysfs_create_group(&prng_tdes_dev.this_device->kobj,
+ &prng_tdes_dev_attr_group);
+ if (ret) {
+ misc_deregister(&prng_tdes_dev);
+ prng_tdes_deinstantiate();
+ goto out;
+ }
+
+ }
+
+out:
return ret;
}
+
static void __exit prng_exit(void)
{
- /* wipe me */
- kzfree(p->buf);
- kfree(p);
-
- misc_deregister(&prng_dev);
+ if (prng_mode == PRNG_MODE_SHA512) {
+ sysfs_remove_group(&prng_sha512_dev.this_device->kobj,
+ &prng_sha512_dev_attr_group);
+ misc_deregister(&prng_sha512_dev);
+ prng_sha512_deinstantiate();
+ } else {
+ sysfs_remove_group(&prng_tdes_dev.this_device->kobj,
+ &prng_tdes_dev_attr_group);
+ misc_deregister(&prng_tdes_dev);
+ prng_tdes_deinstantiate();
+ }
}
+
module_init(prng_init);
module_exit(prng_exit);
diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h
index 694bcd6bd927..2f924bc30e35 100644
--- a/arch/s390/include/asm/kexec.h
+++ b/arch/s390/include/asm/kexec.h
@@ -26,6 +26,9 @@
/* Not more than 2GB */
#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
+/* Allocate control page with GFP_DMA */
+#define KEXEC_CONTROL_MEMORY_GFP GFP_DMA
+
/* Maximum address we can use for the crash control pages */
#define KEXEC_CRASH_CONTROL_MEMORY_LIMIT (-1UL)
diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
index a5e656260a70..d29ad9545b41 100644
--- a/arch/s390/include/asm/mmu.h
+++ b/arch/s390/include/asm/mmu.h
@@ -14,7 +14,9 @@ typedef struct {
unsigned long asce_bits;
unsigned long asce_limit;
unsigned long vdso_base;
- /* The mmu context has extended page tables. */
+ /* The mmu context allocates 4K page tables. */
+ unsigned int alloc_pgste:1;
+ /* The mmu context uses extended page tables. */
unsigned int has_pgste:1;
/* The mmu context uses storage keys. */
unsigned int use_skey:1;
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
index d25d9ff10ba8..fb1b93ea3e3f 100644
--- a/arch/s390/include/asm/mmu_context.h
+++ b/arch/s390/include/asm/mmu_context.h
@@ -20,8 +20,11 @@ static inline int init_new_context(struct task_struct *tsk,
mm->context.flush_mm = 0;
mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS;
mm->context.asce_bits |= _ASCE_TYPE_REGION3;
+#ifdef CONFIG_PGSTE
+ mm->context.alloc_pgste = page_table_allocate_pgste;
mm->context.has_pgste = 0;
mm->context.use_skey = 0;
+#endif
mm->context.asce_limit = STACK_TOP_MAX;
crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
return 0;
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index 51e7fb634ebc..7b7858f158b4 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -21,6 +21,7 @@ void crst_table_free(struct mm_struct *, unsigned long *);
unsigned long *page_table_alloc(struct mm_struct *);
void page_table_free(struct mm_struct *, unsigned long *);
void page_table_free_rcu(struct mmu_gather *, unsigned long *, unsigned long);
+extern int page_table_allocate_pgste;
int set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
unsigned long key, bool nq);
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 989cfae9e202..ef24a212eeb7 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -12,12 +12,9 @@
#define _ASM_S390_PGTABLE_H
/*
- * The Linux memory management assumes a three-level page table setup. For
- * s390 31 bit we "fold" the mid level into the top-level page table, so
- * that we physically have the same two-level page table as the s390 mmu
- * expects in 31 bit mode. For s390 64 bit we use three of the five levels
- * the hardware provides (region first and region second tables are not
- * used).
+ * The Linux memory management assumes a three-level page table setup.
+ * For s390 64 bit we use up to four of the five levels the hardware
+ * provides (region first tables are not used).
*
* The "pgd_xxx()" functions are trivial for a folded two-level
* setup: the pgd is never bad, and a pmd always exists (as it's folded
@@ -101,8 +98,8 @@ extern unsigned long zero_page_mask;
#ifndef __ASSEMBLY__
/*
- * The vmalloc and module area will always be on the topmost area of the kernel
- * mapping. We reserve 96MB (31bit) / 128GB (64bit) for vmalloc and modules.
+ * The vmalloc and module area will always be on the topmost area of the
+ * kernel mapping. We reserve 128GB (64bit) for vmalloc and modules.
* On 64 bit kernels we have a 2GB area at the top of the vmalloc area where
* modules will reside. That makes sure that inter module branches always
* happen without trampolines and in addition the placement within a 2GB frame
@@ -131,38 +128,6 @@ static inline int is_module_addr(void *addr)
}
/*
- * A 31 bit pagetable entry of S390 has following format:
- * | PFRA | | OS |
- * 0 0IP0
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Page-Invalid Bit: Page is not available for address-translation
- * P Page-Protection Bit: Store access not possible for page
- *
- * A 31 bit segmenttable entry of S390 has following format:
- * | P-table origin | |PTL
- * 0 IC
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * I Segment-Invalid Bit: Segment is not available for address-translation
- * C Common-Segment Bit: Segment is not private (PoP 3-30)
- * PTL Page-Table-Length: Page-table length (PTL+1*16 entries -> up to 256)
- *
- * The 31 bit segmenttable origin of S390 has following format:
- *
- * |S-table origin | | STL |
- * X **GPS
- * 00000000001111111111222222222233
- * 01234567890123456789012345678901
- *
- * X Space-Switch event:
- * G Segment-Invalid Bit: *
- * P Private-Space Bit: Segment is not private (PoP 3-30)
- * S Storage-Alteration:
- * STL Segment-Table-Length: Segment-table length (STL+1*16 entries -> up to 2048)
- *
* A 64 bit pagetable entry of S390 has following format:
* | PFRA |0IPC| OS |
* 0000000000111111111122222222223333333333444444444455555555556666
@@ -220,7 +185,6 @@ static inline int is_module_addr(void *addr)
/* Software bits in the page table entry */
#define _PAGE_PRESENT 0x001 /* SW pte present bit */
-#define _PAGE_TYPE 0x002 /* SW pte type bit */
#define _PAGE_YOUNG 0x004 /* SW pte young bit */
#define _PAGE_DIRTY 0x008 /* SW pte dirty bit */
#define _PAGE_READ 0x010 /* SW pte read bit */
@@ -240,31 +204,34 @@ static inline int is_module_addr(void *addr)
* table lock held.
*
* The following table gives the different possible bit combinations for
- * the pte hardware and software bits in the last 12 bits of a pte:
+ * the pte hardware and software bits in the last 12 bits of a pte
+ * (. unassigned bit, x don't care, t swap type):
*
* 842100000000
* 000084210000
* 000000008421
- * .IR...wrdytp
- * empty .10...000000
- * swap .10...xxxx10
- * file .11...xxxxx0
- * prot-none, clean, old .11...000001
- * prot-none, clean, young .11...000101
- * prot-none, dirty, old .10...001001
- * prot-none, dirty, young .10...001101
- * read-only, clean, old .11...010001
- * read-only, clean, young .01...010101
- * read-only, dirty, old .11...011001
- * read-only, dirty, young .01...011101
- * read-write, clean, old .11...110001
- * read-write, clean, young .01...110101
- * read-write, dirty, old .10...111001
- * read-write, dirty, young .00...111101
+ * .IR.uswrdy.p
+ * empty .10.00000000
+ * swap .11..ttttt.0
+ * prot-none, clean, old .11.xx0000.1
+ * prot-none, clean, young .11.xx0001.1
+ * prot-none, dirty, old .10.xx0010.1
+ * prot-none, dirty, young .10.xx0011.1
+ * read-only, clean, old .11.xx0100.1
+ * read-only, clean, young .01.xx0101.1
+ * read-only, dirty, old .11.xx0110.1
+ * read-only, dirty, young .01.xx0111.1
+ * read-write, clean, old .11.xx1100.1
+ * read-write, clean, young .01.xx1101.1
+ * read-write, dirty, old .10.xx1110.1
+ * read-write, dirty, young .00.xx1111.1
+ * HW-bits: R read-only, I invalid
+ * SW-bits: p present, y young, d dirty, r read, w write, s special,
+ * u unused, l large
*
- * pte_present is true for the bit pattern .xx...xxxxx1, (pte & 0x001) == 0x001
- * pte_none is true for the bit pattern .10...xxxx00, (pte & 0x603) == 0x400
- * pte_swap is true for the bit pattern .10...xxxx10, (pte & 0x603) == 0x402
+ * pte_none is true for the bit pattern .10.00000000, pte == 0x400
+ * pte_swap is true for the bit pattern .11..ooooo.0, (pte & 0x201) == 0x200
+ * pte_present is true for the bit pattern .xx.xxxxxx.1, (pte & 0x001) == 0x001
*/
/* Bits in the segment/region table address-space-control-element */
@@ -335,6 +302,8 @@ static inline int is_module_addr(void *addr)
* read-write, dirty, young 11..0...0...11
* The segment table origin is used to distinguish empty (origin==0) from
* read-write, old segment table entries (origin!=0)
+ * HW-bits: R read-only, I invalid
+ * SW-bits: y young, d dirty, r read, w write
*/
#define _SEGMENT_ENTRY_SPLIT_BIT 11 /* THP splitting bit number */
@@ -423,6 +392,15 @@ static inline int mm_has_pgste(struct mm_struct *mm)
return 0;
}
+static inline int mm_alloc_pgste(struct mm_struct *mm)
+{
+#ifdef CONFIG_PGSTE
+ if (unlikely(mm->context.alloc_pgste))
+ return 1;
+#endif
+ return 0;
+}
+
/*
* In the case that a guest uses storage keys
* faults should no longer be backed by zero pages
@@ -516,7 +494,7 @@ static inline int pmd_large(pmd_t pmd)
return (pmd_val(pmd) & _SEGMENT_ENTRY_LARGE) != 0;
}
-static inline int pmd_pfn(pmd_t pmd)
+static inline unsigned long pmd_pfn(pmd_t pmd)
{
unsigned long origin_mask;
@@ -582,10 +560,9 @@ static inline int pte_none(pte_t pte)
static inline int pte_swap(pte_t pte)
{
- /* Bit pattern: (pte & 0x603) == 0x402 */
- return (pte_val(pte) & (_PAGE_INVALID | _PAGE_PROTECT |
- _PAGE_TYPE | _PAGE_PRESENT))
- == (_PAGE_INVALID | _PAGE_TYPE);
+ /* Bit pattern: (pte & 0x201) == 0x200 */
+ return (pte_val(pte) & (_PAGE_PROTECT | _PAGE_PRESENT))
+ == _PAGE_PROTECT;
}
static inline int pte_special(pte_t pte)
@@ -1586,51 +1563,51 @@ static inline int has_transparent_hugepage(void)
#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
/*
- * 31 bit swap entry format:
- * A page-table entry has some bits we have to treat in a special way.
- * Bits 0, 20 and bit 23 have to be zero, otherwise an specification
- * exception will occur instead of a page translation exception. The
- * specifiation exception has the bad habit not to store necessary
- * information in the lowcore.
- * Bits 21, 22, 30 and 31 are used to indicate the page type.
- * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
- * This leaves the bits 1-19 and bits 24-29 to store type and offset.
- * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19
- * plus 24 for the offset.
- * 0| offset |0110|o|type |00|
- * 0 0000000001111111111 2222 2 22222 33
- * 0 1234567890123456789 0123 4 56789 01
- *
* 64 bit swap entry format:
* A page-table entry has some bits we have to treat in a special way.
* Bits 52 and bit 55 have to be zero, otherwise an specification
* exception will occur instead of a page translation exception. The
* specifiation exception has the bad habit not to store necessary
* information in the lowcore.
- * Bits 53, 54, 62 and 63 are used to indicate the page type.
- * A swap pte is indicated by bit pattern (pte & 0x603) == 0x402
- * This leaves the bits 0-51 and bits 56-61 to store type and offset.
- * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51
- * plus 56 for the offset.
- * | offset |0110|o|type |00|
- * 0000000000111111111122222222223333333333444444444455 5555 5 55566 66
- * 0123456789012345678901234567890123456789012345678901 2345 6 78901 23
+ * Bits 54 and 63 are used to indicate the page type.
+ * A swap pte is indicated by bit pattern (pte & 0x201) == 0x200
+ * This leaves the bits 0-51 and bits 56-62 to store type and offset.
+ * We use the 5 bits from 57-61 for the type and the 52 bits from 0-51
+ * for the offset.
+ * | offset |01100|type |00|
+ * |0000000000111111111122222222223333333333444444444455|55555|55566|66|
+ * |0123456789012345678901234567890123456789012345678901|23456|78901|23|
*/
-#define __SWP_OFFSET_MASK (~0UL >> 11)
+#define __SWP_OFFSET_MASK ((1UL << 52) - 1)
+#define __SWP_OFFSET_SHIFT 12
+#define __SWP_TYPE_MASK ((1UL << 5) - 1)
+#define __SWP_TYPE_SHIFT 2
static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
{
pte_t pte;
- offset &= __SWP_OFFSET_MASK;
- pte_val(pte) = _PAGE_INVALID | _PAGE_TYPE | ((type & 0x1f) << 2) |
- ((offset & 1UL) << 7) | ((offset & ~1UL) << 11);
+
+ pte_val(pte) = _PAGE_INVALID | _PAGE_PROTECT;
+ pte_val(pte) |= (offset & __SWP_OFFSET_MASK) << __SWP_OFFSET_SHIFT;
+ pte_val(pte) |= (type & __SWP_TYPE_MASK) << __SWP_TYPE_SHIFT;
return pte;
}
-#define __swp_type(entry) (((entry).val >> 2) & 0x1f)
-#define __swp_offset(entry) (((entry).val >> 11) | (((entry).val >> 7) & 1))
-#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) })
+static inline unsigned long __swp_type(swp_entry_t entry)
+{
+ return (entry.val >> __SWP_TYPE_SHIFT) & __SWP_TYPE_MASK;
+}
+
+static inline unsigned long __swp_offset(swp_entry_t entry)
+{
+ return (entry.val >> __SWP_OFFSET_SHIFT) & __SWP_OFFSET_MASK;
+}
+
+static inline swp_entry_t __swp_entry(unsigned long type, unsigned long offset)
+{
+ return (swp_entry_t) { pte_val(mk_swap_pte(type, offset)) };
+}
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index 210ffede0153..e617e74b7be2 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -14,20 +14,23 @@ static inline pmd_t __pte_to_pmd(pte_t pte)
/*
* Convert encoding pte bits pmd bits
- * .IR...wrdytp dy..R...I...wr
- * empty .10...000000 -> 00..0...1...00
- * prot-none, clean, old .11...000001 -> 00..1...1...00
- * prot-none, clean, young .11...000101 -> 01..1...1...00
- * prot-none, dirty, old .10...001001 -> 10..1...1...00
- * prot-none, dirty, young .10...001101 -> 11..1...1...00
- * read-only, clean, old .11...010001 -> 00..1...1...01
- * read-only, clean, young .01...010101 -> 01..1...0...01
- * read-only, dirty, old .11...011001 -> 10..1...1...01
- * read-only, dirty, young .01...011101 -> 11..1...0...01
- * read-write, clean, old .11...110001 -> 00..0...1...11
- * read-write, clean, young .01...110101 -> 01..0...0...11
- * read-write, dirty, old .10...111001 -> 10..0...1...11
- * read-write, dirty, young .00...111101 -> 11..0...0...11
+ * lIR.uswrdy.p dy..R...I...wr
+ * empty 010.000000.0 -> 00..0...1...00
+ * prot-none, clean, old 111.000000.1 -> 00..1...1...00
+ * prot-none, clean, young 111.000001.1 -> 01..1...1...00
+ * prot-none, dirty, old 111.000010.1 -> 10..1...1...00
+ * prot-none, dirty, young 111.000011.1 -> 11..1...1...00
+ * read-only, clean, old 111.000100.1 -> 00..1...1...01
+ * read-only, clean, young 101.000101.1 -> 01..1...0...01
+ * read-only, dirty, old 111.000110.1 -> 10..1...1...01
+ * read-only, dirty, young 101.000111.1 -> 11..1...0...01
+ * read-write, clean, old 111.001100.1 -> 00..1...1...11
+ * read-write, clean, young 101.001101.1 -> 01..1...0...11
+ * read-write, dirty, old 110.001110.1 -> 10..0...1...11
+ * read-write, dirty, young 100.001111.1 -> 11..0...0...11
+ * HW-bits: R read-only, I invalid
+ * SW-bits: p present, y young, d dirty, r read, w write, s special,
+ * u unused, l large
*/
if (pte_present(pte)) {
pmd_val(pmd) = pte_val(pte) & PAGE_MASK;
@@ -48,20 +51,23 @@ static inline pte_t __pmd_to_pte(pmd_t pmd)
/*
* Convert encoding pmd bits pte bits
- * dy..R...I...wr