aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging/sxg/sxg.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/staging/sxg/sxg.c')
-rw-r--r--drivers/staging/sxg/sxg.c206
1 files changed, 101 insertions, 105 deletions
diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c
index dbda031d4053..0050a022010f 100644
--- a/drivers/staging/sxg/sxg.c
+++ b/drivers/staging/sxg/sxg.c
@@ -48,6 +48,7 @@
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/firmware.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
@@ -74,22 +75,15 @@
#define SXG_POWER_MANAGEMENT_ENABLED 0
#define VPCI 0
#define ATK_DEBUG 1
+#define SXG_UCODE_DEBUG 0
+
#include "sxg_os.h"
#include "sxghw.h"
#include "sxghif.h"
#include "sxg.h"
#include "sxgdbg.h"
-
#include "sxgphycode-1.2.h"
-#define SXG_UCODE_DBG 0 /* Turn on for debugging */
-#ifdef SXG_UCODE_DBG
-#include "saharadbgdownload-1.71.c"
-#include "saharadbgdownloadB-1.10.c"
-#else
-#include "saharadownload-1.55.c"
-#include "saharadownloadB-1.8.c"
-#endif
static int sxg_allocate_buffer_memory(struct adapter_t *adapter, u32 Size,
enum sxg_buffer_type BufferType);
@@ -384,7 +378,8 @@ void sxg_reset_interrupt_capability(struct adapter_t *adapter)
/*
* sxg_download_microcode
*
- * Download Microcode to Sahara adapter
+ * Download Microcode to Sahara adapter using the Linux
+ * Firmware module to get the ucode.sys file.
*
* Arguments -
* adapter - A pointer to our adapter structure
@@ -396,99 +391,114 @@ void sxg_reset_interrupt_capability(struct adapter_t *adapter)
static bool sxg_download_microcode(struct adapter_t *adapter,
enum SXG_UCODE_SEL UcodeSel)
{
+ const struct firmware *fw;
+ const char *file = "";
struct sxg_hw_regs *HwRegs = adapter->HwRegs;
+ int ret;
+ int ucode_start;
u32 Section;
u32 ThisSectionSize;
- u32 *Instruction = NULL;
+ u32 instruction = 0;
u32 BaseAddress, AddressOffset, Address;
/* u32 Failure; */
u32 ValueRead;
u32 i;
- u32 numSections = 0;
+ u32 index = 0;
+ u32 num_sections = 0;
u32 sectionSize[16];
u32 sectionStart[16];
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DnldUcod",
adapter, 0, 0, 0);
- DBG_ERROR("sxg: %s ENTER\n", __func__);
-
- switch (UcodeSel) {
- case SXG_UCODE_SYSTEM: // System (operational) ucode
- switch (adapter->asictype) {
- case SAHARA_REV_A:
- DBG_ERROR("%s SAHARA CARD REVISION A\n",
- __func__);
- numSections = SNumSections;
- for (i = 0; i < numSections; i++) {
- sectionSize[i] =
- SSectionSize[i];
- sectionStart[i] =
- SSectionStart[i];
- }
- break;
- case SAHARA_REV_B:
- DBG_ERROR("%s SAHARA CARD REVISION B\n",
- __func__);
- numSections = SBNumSections;
- for (i = 0; i < numSections; i++) {
- sectionSize[i] =
- SBSectionSize[i];
- sectionStart[i] =
- SBSectionStart[i];
- }
- break;
- }
- break;
- default:
- printk(KERN_ERR KBUILD_MODNAME
- ": Woah, big error with the microcode!\n");
- break;
+
+ /*
+ * This routine is only implemented to download the microcode
+ * for the Revision B Sahara chip. Rev A and Diagnostic
+ * microcode is not supported at this time. If Rev A or
+ * diagnostic ucode is required, this routine will obviously
+ * need to change. Also, eventually need to add support for
+ * Rev B checked version of ucode. That's easy enough once
+ * the free version of Rev B works.
+ */
+ ASSERT(UcodeSel == SXG_UCODE_SYSTEM);
+ ASSERT(adapter->asictype == SAHARA_REV_B);
+#if SXG_UCODE_DEBUG
+ file = "sxg/saharadbgdownloadB.sys";
+#else
+ file = "sxg/saharadownloadB.sys";
+#endif
+ ret = request_firmware(&fw, file, &adapter->pcidev->dev);
+ if (ret) {
+ DBG_ERROR("%s SXG_NIC: Failed to load firmware %s\n", __func__,file);
+ return ret;
+ }
+
+ /*
+ * The microcode .sys file contains starts with a 4 byte word containing
+ * the number of sections. That is followed by "num_sections" 4 byte
+ * words containing each "section" size. That is followed num_sections
+ * 4 byte words containing each section "start" address.
+ *
+ * Following the above header, the .sys file contains num_sections,
+ * where each section size is specified, newline delineatetd 12 byte
+ * microcode instructions.
+ */
+ num_sections = *(u32 *)(fw->data + index);
+ index += 4;
+ ASSERT(num_sections <= 3);
+ for (i = 0; i < num_sections; i++) {
+ sectionSize[i] = *(u32 *)(fw->data + index);
+ index += 4;
+ }
+ for (i = 0; i < num_sections; i++) {
+ sectionStart[i] = *(u32 *)(fw->data + index);
+ index += 4;
}
- DBG_ERROR("sxg: RESET THE CARD\n");
/* First, reset the card */
WRITE_REG(HwRegs->Reset, 0xDEAD, FLUSH);
udelay(50);
+ HwRegs = adapter->HwRegs;
/*
* Download each section of the microcode as specified in
- * its download file. The *download.c file is generated using
- * the saharaobjtoc facility which converts the metastep .obj
- * file to a .c file which contains a two dimentional array.
+ * sectionSize[index] to sectionStart[index] address. As
+ * described above, the .sys file contains 12 byte word
+ * microcode instructions. The *download.sys file is generated
+ * using the objtosys.exe utility that was built for Sahara
+ * microcode.
*/
- for (Section = 0; Section < numSections; Section++) {
- DBG_ERROR("sxg: SECTION # %d\n", Section);
- switch (UcodeSel) {
- case SXG_UCODE_SYSTEM:
- switch (adapter->asictype) {
- case SAHARA_REV_A:
- Instruction = (u32 *) & SaharaUCode[Section][0];
- break;
- case SAHARA_REV_B:
- Instruction = (u32 *) & SaharaUCodeB[Section][0];
- break;
- }
- break;
- default:
- ASSERT(0);
- break;
- }
+ /* See usage of this below when we read back for parity */
+ ucode_start = index;
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
+ for (Section = 0; Section < num_sections; Section++) {
BaseAddress = sectionStart[Section];
/* Size in instructions */
ThisSectionSize = sectionSize[Section] / 12;
for (AddressOffset = 0; AddressOffset < ThisSectionSize;
AddressOffset++) {
+ u32 first_instr = 0; /* See comment below */
+
Address = BaseAddress + AddressOffset;
ASSERT((Address & ~MICROCODE_ADDRESS_MASK) == 0);
- /* Write instruction bits 31 - 0 */
- WRITE_REG(HwRegs->UcodeDataLow, *Instruction, FLUSH);
- /* Write instruction bits 63-32 */
- WRITE_REG(HwRegs->UcodeDataMiddle, *(Instruction + 1),
- FLUSH);
- /* Write instruction bits 95-64 */
- WRITE_REG(HwRegs->UcodeDataHigh, *(Instruction + 2),
- FLUSH);
+ /* Write instruction bits 31 - 0 (low) */
+ first_instr = instruction;
+ WRITE_REG(HwRegs->UcodeDataLow, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4; /* Advance to the "next" instruction */
+
+ /* Write instruction bits 63-32 (middle) */
+ WRITE_REG(HwRegs->UcodeDataMiddle, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4; /* Advance to the "next" instruction */
+
+ /* Write instruction bits 95-64 (high) */
+ WRITE_REG(HwRegs->UcodeDataHigh, instruction, FLUSH);
+ instruction = *(u32 *)(fw->data + index);
+ index += 4; /* Advance to the "next" instruction */
+
/* Write instruction address with the WRITE bit set */
WRITE_REG(HwRegs->UcodeAddr,
(Address | MICROCODE_ADDRESS_WRITE), FLUSH);
@@ -500,34 +510,16 @@ static bool sxg_download_microcode(struct adapter_t *adapter,
* and write the data for the next instruction to DataLow. That
* write should succeed.
*/
- WRITE_REG(HwRegs->UcodeDataLow, *Instruction, TRUE);
- /* Advance 3 u32S to start of next instruction */
- Instruction += 3;
+ WRITE_REG(HwRegs->UcodeDataLow, first_instr, FLUSH);
}
}
/*
* Now repeat the entire operation reading the instruction back and
* checking for parity errors
*/
- for (Section = 0; Section < numSections; Section++) {
- DBG_ERROR("sxg: check SECTION # %d\n", Section);
- switch (UcodeSel) {
- case SXG_UCODE_SYSTEM:
- switch (adapter->asictype) {
- case SAHARA_REV_A:
- Instruction = (u32 *) &
- SaharaUCode[Section][0];
- break;
- case SAHARA_REV_B:
- Instruction = (u32 *) &
- SaharaUCodeB[Section][0];
- break;
- }
- break;
- default:
- ASSERT(0);
- break;
- }
+ index = ucode_start;
+
+ for (Section = 0; Section < num_sections; Section++) {
BaseAddress = sectionStart[Section];
/* Size in instructions */
ThisSectionSize = sectionSize[Section] / 12;
@@ -547,29 +539,36 @@ static bool sxg_download_microcode(struct adapter_t *adapter,
}
ASSERT((ValueRead & MICROCODE_ADDRESS_MASK) == Address);
/* Read the instruction back and compare */
+ /* First instruction */
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
READ_REG(HwRegs->UcodeDataLow, ValueRead);
- if (ValueRead != *Instruction) {
+ if (ValueRead != instruction) {
DBG_ERROR("sxg: %s MISCOMPARE LOW\n",
__func__);
return FALSE; /* Miscompare */
}
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
READ_REG(HwRegs->UcodeDataMiddle, ValueRead);
- if (ValueRead != *(Instruction + 1)) {
+ if (ValueRead != instruction) {
DBG_ERROR("sxg: %s MISCOMPARE MIDDLE\n",
__func__);
return FALSE; /* Miscompare */
}
+ instruction = *(u32 *)(fw->data + index);
+ index += 4;
READ_REG(HwRegs->UcodeDataHigh, ValueRead);
- if (ValueRead != *(Instruction + 2)) {
+ if (ValueRead != instruction) {
DBG_ERROR("sxg: %s MISCOMPARE HIGH\n",
__func__);
return FALSE; /* Miscompare */
}
- /* Advance 3 u32S to start of next instruction */
- Instruction += 3;
}
}
+ /* download finished */
+ release_firmware(fw);
/* Everything OK, Go. */
WRITE_REG(HwRegs->UcodeAddr, MICROCODE_ADDRESS_GO, FLUSH);
@@ -581,12 +580,11 @@ static bool sxg_download_microcode(struct adapter_t *adapter,
udelay(50);
READ_REG(adapter->UcodeRegs[0].CardUp, ValueRead);
if (ValueRead == 0xCAFE) {
- DBG_ERROR("sxg: %s BOO YA 0xCAFE\n", __func__);
break;
}
}
if (i == 10000) {
- DBG_ERROR("sxg: %s TIMEOUT\n", __func__);
+ DBG_ERROR("sxg: %s TIMEOUT bringing up card - verify MICROCODE\n", __func__);
return FALSE; /* Timeout */
}
@@ -601,8 +599,6 @@ static bool sxg_download_microcode(struct adapter_t *adapter,
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDnldUcd",
adapter, 0, 0, 0);
- DBG_ERROR("sxg: %s EXIT\n", __func__);
-
return (TRUE);
}

Privacy Policy