path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds9-12/+11
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
2014-12-11Merge branch 'for-3.19' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu updates from Tejun Heo: "Nothing interesting. A patch to convert the remaining __get_cpu_var() users, another to fix non-critical off-by-one in an assertion and a cosmetic conversion to lockless_dereference() in percpu-ref. The back-merge from mainline is to receive lockless_dereference()" * 'for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: Replace smp_read_barrier_depends() with lockless_dereference() percpu: Convert remaining __get_cpu_var uses in 3.18-rcX percpu: off by one in BUG_ON()
2014-12-11Merge tag 'stable/for-linus-3.19-rc0-tag' of ↵Linus Torvalds15-264/+329
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen features and fixes from David Vrabel: - Fully support non-coherent devices on ARM by introducing the mechanisms to request the hypervisor to perform the required cache maintainance operations. - A number of pciback bug fixes and cleanups. Notably a deadlock fix if a PCI device was manually uunbound and a fix for incorrectly restoring state after a function reset. - In x86 PVHVM guests, use the APIC for interrupts if this has been virtualized by the hardware. This reduces the number of interrupt- related VM exits on such hardware. * tag 'stable/for-linus-3.19-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (26 commits) Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single" xen/pci: Use APIC directly when APIC virtualization hardware is available xen/pci: Defer initialization of MSI ops on HVM guests xen-pciback: drop SR-IOV VFs when PF driver unloads xen/pciback: Restore configuration space when detaching from a guest. PCI: Expose pci_load_saved_state for public consumption. xen/pciback: Remove tons of dereferences xen/pciback: Print out the domain owning the device. xen/pciback: Include the domain id if removing the device whilst still in use driver core: Provide an wrapper around the mutex to do lockdep warnings xen/pciback: Don't deadlock when unbinding. swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single swiotlb-xen: call xen_dma_sync_single_for_device when appropriate swiotlb-xen: remove BUG_ON in xen_bus_to_phys swiotlb-xen: pass dev_addr to xen_dma_unmap_page and xen_dma_sync_single_for_cpu xen/arm: introduce GNTTABOP_cache_flush xen/arm/arm64: introduce xen_arch_need_swiotlb xen/arm/arm64: merge xen/mm32.c into xen/mm.c xen/arm: use hypercall to flush caches in map_page xen: add a dma_addr_t dev_addr argument to xen_dma_map_page ...
2014-12-11Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds258-3505/+8039
Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...
2014-12-11Merge tag 'powerpc-3.19-1' of ↵Linus Torvalds189-2127/+1651
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: "Some nice cleanups like removing bootmem, and removal of __get_cpu_var(). There is one patch to mm/gup.c. This is the generic GUP implementation, but is only used by us and arm(64). We have an ack from Steve Capper, and although we didn't get an ack from Andrew he told us to take the patch through the powerpc tree. There's one cxl patch. This is in drivers/misc, but Greg said he was happy for us to manage fixes for it. There is an infrastructure patch to support an IPMI driver for OPAL. There is also an RTC driver for OPAL. We weren't able to get any response from the RTC maintainer, Alessandro Zummo, so in the end we just merged the driver. The usual batch of Freescale updates from Scott" * tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits) powerpc/powernv: Return to cpu offline loop when finished in KVM guest powerpc/book3s: Fix partial invalidation of TLBs in MCE code. powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault powerpc/xmon: Cleanup the breakpoint flags powerpc/xmon: Enable HW instruction breakpoint on POWER8 powerpc/mm/thp: Use tlbiel if possible powerpc/mm/thp: Remove code duplication powerpc/mm/hugetlb: Sanity check gigantic hugepage count powerpc/oprofile: Disable pagefaults during user stack read powerpc/mm: Check for matching hpte without taking hpte lock powerpc: Drop useless warning in eeh_init() powerpc/powernv: Cleanup unused MCE definitions/declarations. powerpc/eeh: Dump PHB diag-data early powerpc/eeh: Recover EEH error on ownership change for BCM5719 powerpc/eeh: Set EEH_PE_RESET on PE reset powerpc/eeh: Refactor eeh_reset_pe() powerpc: Remove more traces of bootmem powerpc/pseries: Initialise nvram_pstore_info's buf_lock cxl: Name interrupts in /proc/interrupt cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning ...
2014-12-11Merge branch 'for-linus' of ↵Linus Torvalds49-996/+1140
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: "The most notable change for this pull request is the ftrace rework from Heiko. It brings a small performance improvement and the ground work to support a new gcc option to replace the mcount blocks with a single nop. Two new s390 specific system calls are added to emulate user space mmio for PCI, an artifact of the how PCI memory is accessed. Two patches for the memory management with changes to common code. For KVM mm_forbids_zeropage is added which disables the empty zero page for an mm that is used by a KVM process. And an optimization, pmdp_get_and_clear_full is added analog to ptep_get_and_clear_full. Some micro optimization for the cmpxchg and the spinlock code. And as usual bug fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) s390/cputime: fix 31-bit compile s390/scm_block: make the number of reqs per HW req configurable s390/scm_block: handle multiple requests in one HW request s390/scm_block: allocate aidaw pages only when necessary s390/scm_block: use mempool to manage aidaw requests s390/eadm: change timeout value s390/mm: fix memory leak of ptlock in pmd_free_tlb s390: use local symbol names in entry[64].S s390/ptrace: always include vector registers in core files s390/simd: clear vector register pointer on fork/clone s390: translate cputime magic constants to macros s390/idle: convert open coded idle time seqcount s390/idle: add missing irq off lockdep annotation s390/debug: avoid function call for debug_sprintf_* s390/kprobes: fix instruction copy for out of line execution s390: remove diag 44 calls from cpu_relax() s390/dasd: retry partition detection s390/dasd: fix list corruption for sleep_on requests s390/dasd: fix infinite term I/O loop s390/dasd: remove unused code ...
2014-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds67-186/+142
Pull networking updates from David Miller: 1) New offloading infrastructure and example 'rocker' driver for offloading of switching and routing to hardware. This work was done by a large group of dedicated individuals, not limited to: Scott Feldman, Jiri Pirko, Thomas Graf, John Fastabend, Jamal Hadi Salim, Andy Gospodarek, Florian Fainelli, Roopa Prabhu 2) Start making the networking operate on IOV iterators instead of modifying iov objects in-situ during transfers. Thanks to Al Viro and Herbert Xu. 3) A set of new netlink interfaces for the TIPC stack, from Richard Alpe. 4) Remove unnecessary looping during ipv6 routing lookups, from Martin KaFai Lau. 5) Add PAUSE frame generation support to gianfar driver, from Matei Pavaluca. 6) Allow for larger reordering levels in TCP, which are easily achievable in the real world right now, from Eric Dumazet. 7) Add a variable of napi_schedule that doesn't need to disable cpu interrupts, from Eric Dumazet. 8) Use a doubly linked list to optimize neigh_parms_release(), from Nicolas Dichtel. 9) Various enhancements to the kernel BPF verifier, and allow eBPF programs to actually be attached to sockets. From Alexei Starovoitov. 10) Support TSO/LSO in sunvnet driver, from David L Stevens. 11) Allow controlling ECN usage via routing metrics, from Florian Westphal. 12) Remote checksum offload, from Tom Herbert. 13) Add split-header receive, BQL, and xmit_more support to amd-xgbe driver, from Thomas Lendacky. 14) Add MPLS support to openvswitch, from Simon Horman. 15) Support wildcard tunnel endpoints in ipv6 tunnels, from Steffen Klassert. 16) Do gro flushes on a per-device basis using a timer, from Eric Dumazet. This tries to resolve the conflicting goals between the desired handling of bulk vs. RPC-like traffic. 17) Allow userspace to ask for the CPU upon what a packet was received/steered, via SO_INCOMING_CPU. From Eric Dumazet. 18) Limit GSO packets to half the current congestion window, from Eric Dumazet. 19) Add a generic helper so that all drivers set their RSS keys in a consistent way, from Eric Dumazet. 20) Add xmit_more support to enic driver, from Govindarajulu Varadarajan. 21) Add VLAN packet scheduler action, from Jiri Pirko. 22) Support configurable RSS hash functions via ethtool, from Eyal Perry. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1820 commits) Fix race condition between vxlan_sock_add and vxlan_sock_release net/macb: fix compilation warning for print_hex_dump() called with skb->mac_header net/mlx4: Add support for A0 steering net/mlx4: Refactor QUERY_PORT net/mlx4_core: Add explicit error message when rule doesn't meet configuration net/mlx4: Add A0 hybrid steering net/mlx4: Add mlx4_bitmap zone allocator net/mlx4: Add a check if there are too many reserved QPs net/mlx4: Change QP allocation scheme net/mlx4_core: Use tasklet for user-space CQ completion events net/mlx4_core: Mask out host side virtualization features for guests net/mlx4_en: Set csum level for encapsulated packets be2net: Export tunnel offloads only when a VxLAN tunnel is created gianfar: Fix dma check map error when DMA_API_DEBUG is enabled cxgb4/csiostor: Don't use MASTER_MUST for fw_hello call net: fec: only enable mdio interrupt before phy device link up net: fec: clear all interrupt events to support i.MX6SX net: fec: reset fep link status in suspend function net: sock: fix access via invalid file descriptor net: introduce helper macro for_each_cmsghdr ...
2014-12-11Merge tag 'sound-3.19-rc1' of ↵Linus Torvalds2-0/+71
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This became a fairly large pull request. In addition to the usual driver updates / fixes, there have been a high amount of cleanups in ASoC area, as well as control API helpers and kernel documentations fixes touching through the whole tree. In the driver side, the biggest changes are the support for new Intel SoC found on new x86 machines, and the updates of FireWire dice and oxfw drivers. Some remarkable items are below: ALSA core: - PCM mmap code cleanup, removal of arch-dependent codes - PCM xrun injection support - PCM hwptr tracepoint support - Refactoring of snd_pcm_action(), simplification of PCM locking - Robustified sequecner auto-load functionality - New control API helpers and lots of cleanups along with them - Lots of kerneldoc fixes and cleanups USB-audio: - The mixer resume code was largely rewritten, and the devices with quirks are resumed properly. - New hardware support: Focusrite Scarlett, Digidesign Mbox1, Denon/Marantz DACs, Zoom R16/24 FireWire: - DICE driver updates with better duplex and sync support, including MIDI support - New OXFW driver for Oxford Semiconductor FW970/971 chipset, including the previous LaCie Speakers device. Fullduplex and MIDI support included as well as DICE driver. HD-audio: - Refactoring the driver-caps quirk handling in snd-hda-intel - More consistent control names representing the topology better - Fixups: HP mute LED with ALC268 codec, Ideapad S210 built-in mic fix, ASUS Z99He laptop EAPD ASoC: - Conversion of AC'97 drivers to use regmap, bringing us closer to the removal of the ASoC level I/O code - Clean up a lot of old drivers that were open coding things that have subsequently been implemented in the core - Some DAPM performance improvements - Removal of the now seldom used CODEC mutex - Lots of updates for the newer Intel SoC support, including support for the DSP and some Cherrytrail and Braswell machine drivers - Support for Samsung boards using rt5631 as the CODEC - Removal of the obsolete AFEB9260 machine driver - Driver support for the TI TS3A227E headset driver used in some Chrombeooks Others: - ASIHPI driver update and cleanups - Lots of dev_*() printk conversions - Lots of trivial cleanups for the codes spotted by Coccinelle" * tag 'sound-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (594 commits) ALSA: pcxhr: NULL dereference on probe failure ALSA: lola: NULL dereference on probe failure ALSA: hda - Add "eapd" model string for AD1986A codec ALSA: hda - Add EAPD fixup for ASUS Z99He laptop ALSA: oxfw: Add hwdep interface ALSA: oxfw: Add support for capture/playback MIDI messages ALSA: oxfw: add support for capturing PCM samples ALSA: oxfw: Add support AMDTP in-stream ALSA: oxfw: Add support for Behringer/Mackie devices ALSA: oxfw: Change the way to start stream ALSA: oxfw: Add proc interface for debugging purpose ALSA: oxfw: Change the way to make PCM rules/constraints ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation ALSA: oxfw: Change the way to name card ALSA: dice: Add support for MIDI capture/playback ALSA: dice: Add support for capturing PCM samples ALSA: dice: Support for non SYT-Match sampling clock source mode ALSA: dice: Add support for duplex streams with synchronization ALSA: dice: Change the way to start stream ALSA: jack: Add dummy snd_jack_set_key() definition ...
2014-12-11Merge tag 'devicetree-for-linus' of ↵Linus Torvalds5-17/+18
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree changes from Grant Likely: "Lots of activity in the devicetree code for v3.18. Most of it is related to getting all of the overlay support code in place, but there are other important things in there. Highlights: - OF_RECONFIG notifiers for SPI, I2C and Platform devices. Those subsystems can now respond to live changes to the device tree. - CONFIG_OF_OVERLAY method for applying live changes to the device tree - Removal of the of_allnodes list. This used to be used to iterate over all the nodes in the device tree, but it is unnecessary because the same thing can be done by iterating over the list of child pointers. Getting rid of of_allnodes saves some memory and avoids the possibility of of_allnodes being sorted differently from the child lists. - Support for retrieving original DTB blob via sysfs. Needed by kexec. - More unittests - Documentation and minor bug fixes" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: (42 commits) of: Delete unnecessary check before calling "of_node_put()" of: Drop ->next pointer from struct device_node spi: Check for spi_of_notifier when CONFIG_OF_DYNAMIC=y of: support passing console options with stdout-path of: add optional options parameter to of_find_node_by_path() of: Add bindings for chosen node, stdout-path of: Remove unneeded and incorrect MODULE_DEVICE_TABLE ARM: dt: fix up PL011 device tree bindings of: base, fix of_property_read_string_helper kernel-doc of: remove select of non-existant OF_DEVICE config symbol spi/of: Add OF notifier handler spi/of: Create new device registration method and accessors i2c/of: Add OF_RECONFIG notifier handler i2c/of: Factor out Devicetree registration code of/overlay: Add overlay unittests of/overlay: Introduce DT overlay support of/reconfig: Add OF_DYNAMIC notifier for platform_bus_type of/reconfig: Always use the same structure for notifiers of/reconfig: Add debug output for OF_RECONFIG notifiers of/reconfig: Add empty stubs for the of_reconfig methods ...
2014-12-11Merge tag 'media/v3.19-rc1' of ↵Linus Torvalds9-82/+51
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Two new dvb frontend drivers: mn88472 and mn88473 - A new driver for some PCIe DVBSky cards - A new remote controller driver: meson-ir - One LIRC staging driver got rewritten and promoted to mainstream: igorplugusb - A new tuner driver (m88rs6000t) - The old omap2 media driver got removed from staging. This driver uses an old DMA API and it is likely broken on recent kernels. Nobody cared enough to fix it - Media bus format moved to a separate header, as DRM will also use the definitions there - mem2mem_testdev were renamed to vim2m, in order to use the same naming convention taken by the other virtual test driver (vivid) - Added a new driver for coda SoC (coda-jpeg) - The cx88 driver got converted to use videobuf2 core - Make DMABUF export buffer to work with DMA Scatter/Gather and Vmalloc cores - Lots of other fixes, improvements and cleanups on the drivers. * tag 'media/v3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (384 commits) [media] mn88473: One function call less in mn88473_init() after error [media] mn88473: Remove uneeded check before release_firmware() [media] lirc_zilog: Deletion of unnecessary checks before vfree() [media] MAINTAINERS: Add myself as img-ir maintainer [media] img-ir: Don't set driver's module owner [media] img-ir: Depend on METAG or MIPS or COMPILE_TEST [media] img-ir/hw: Drop [un]register_decoder declarations [media] img-ir/hw: Fix potential deadlock stopping timer [media] img-ir/hw: Always read data to clear buffer [media] redrat3: ensure dma is setup properly [media] ddbridge: remove unneeded check before dvb_unregister_device() [media] si2157: One function call less in si2157_init() after error [media] tuners: remove uneeded checks before release_firmware() [media] arm: omap2: rx51-peripherals: fix build warning [media] stv090x: add an extra protetion against buffer overflow [media] stv090x: Remove an unreachable code [media] stv090x: Some whitespace cleanups [media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups [media] si2168: add support for firmware files in new format [media] si2168: debug printout for firmware version ...
2014-12-11Merge tag 'pinctrl-v3.19-1' of ↵Linus Torvalds11-350/+350
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: "Here is a stash of pin control changes I have collected for the v3.19 series. Mainly new hardware support, with Intels new embedded SoC as the especially interesting thing standing out, fully using the subsystem. - Force conversion of the ux500 pin control device trees and parsers to use the generic pin control bindings. - New driver and device tree bindings for the Qualcomm PMIC MPP pin controller and GPIO. - Some ACPI infrastructure for pin controllers. - New driver for the Intel CherryView/Braswell pin controller, the first Intel pin controller to fully take advantage of the pin control subsystem. - Support the Freescale i.MX VF610 variant. - Support the sunxi A80 variant. - Support the Samsung Exynos 4415 and Exynos 7 variants. - Split out Intel pin controllers to their own subdirectory. - A large slew of rockchip pin control updates, including suspend/resume support. - A large slew of Samsung Exynos pin controller updates. - Various minor updates and fixes" * tag 'pinctrl-v3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (49 commits) pinctrl: at91: enhance (debugfs) at91_gpio_dbg_show pinctrl: meson: add device tree bindings documentation gpio: tz1090: Fix error handling of irq_of_parse_and_map pinctrl: tz1090-pinctrl.txt: Fix typo in binding pinctrl: pinconf-generic: Declare dt_params/conf_items const pinctrl: exynos: Add support for Exynos4415 pinctrl: exynos: Add initial driver data for Exynos7 pinctrl: exynos: Add irq_chip instance for Exynos7 wakeup interrupts pinctrl: exynos: Consolidate irq domain callbacks pinctrl: exynos: Generalize the eint16_31 demux code pinctrl: samsung: Separate per-bank init and runtime data pinctrl: samsung: Constify samsung_pin_ctrl struct pinctrl: samsung: Constify samsung_pin_bank_type struct pinctrl: samsung: Drop unused label field in samsung_pin_ctrl struct pinctrl: samsung: Make samsung_pinctrl_get_soc_data use ERR_PTR() pinctrl: Add Intel Cherryview/Braswell pin controller support gpio / ACPI: Add knowledge about pin controllers to acpi_get_gpiod() pinctrl: Fix path error in documentation pinctrl: rockchip: save and restore gpio6_c6 pinmux in suspend/resume pinctrl: rockchip: add suspend/resume functions ...
2014-12-10Merge tag 'pm+acpi-3.19-rc1' of ↵Linus Torvalds28-44/+74
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
2014-12-10Merge tag 'trace-seq-buf-3.19' of ↵Linus Torvalds1-5/+86
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull nmi-safe seq_buf printk update from Steven Rostedt: "This code is a fork from the trace-3.19 pull as it needed the trace_seq clean ups from that branch. This code solves the issue of performing stack dumps from NMI context. The issue is that printk() is not safe from NMI context as if the NMI were to trigger when a printk() was being performed, the NMI could deadlock from the printk() internal locks. This has been seen in practice. With lots of review from Petr Mladek, this code went through several iterations, and we feel that it is now at a point of quality to be accepted into mainline. Here's what is contained in this patch set: - Creates a "seq_buf" generic buffer utility that allows a descriptor to be passed around where functions can write their own "printk()" formatted strings into it. The generic version was pulled out of the trace_seq() code that was made specifically for tracing. - The seq_buf code was change to model the seq_file code. I have a patch (not included for 3.19) that converts the seq_file.c code over to use seq_buf.c like the trace_seq.c code does. This was done to make sure that seq_buf.c is compatible with seq_file.c. I may try to get that patch in for 3.20. - The seq_buf.c file was moved to lib/ to remove it from being dependent on CONFIG_TRACING. - The printk() was updated to allow for a per_cpu "override" of the internal calls. That is, instead of writing to the console, a call to printk() may do something else. This made it easier to allow the NMI to change what printk() does in order to call dump_stack() without needing to update that code as well. - Finally, the dump_stack from all CPUs via NMI code was converted to use the seq_buf code. The caller to trigger the NMI code would wait till all the NMIs finished, and then it would print the seq_buf data to the console safely from a non NMI context One added bonus is that this code also makes the NMI dump stack work on PREEMPT_RT kernels. As printk() includes sleeping locks on PREEMPT_RT, printk() only writes to console if the console does not use any rt_mutex converted spin locks. Which a lot do" * tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/nmi: Fix use of unallocated cpumask_var_t printk/percpu: Define printk_func when printk is not defined x86/nmi: Perform a safe NMI stack trace on all CPUs printk: Add per_cpu printk func to allow printk to be diverted seq_buf: Move the seq_buf code to lib/ seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions tracing: Have seq_buf use full buffer seq_buf: Add seq_buf_can_fit() helper function tracing: Add paranoid size check in trace_printk_seq() tracing: Use trace_seq_used() and seq_buf_used() instead of len tracing: Clean up tracing_fill_pipe_page() seq_buf: Create seq_buf_used() to find out how much was written tracing: Add a seq_buf_clear() helper and clear len and readpos in init tracing: Convert seq_buf fields to be like seq_file fields tracing: Convert seq_buf_path() to be like seq_path() tracing: Create seq_buf layer in trace_seq
2014-12-10Merge tag 'trace-3.19' of ↵Linus Torvalds6-100/+460
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "There was a lot of clean ups and minor fixes. One of those clean ups was to the trace_seq code. It also removed the return values to the trace_seq_*() functions and use trace_seq_has_overflowed() to see if the buffer filled up or not. This is similar to work being done to the seq_file code as well in another tree. Some of the other goodies include: - Added some "!" (NOT) logic to the tracing filter. - Fixed the frame pointer logic to the x86_64 mcount trampolines - Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems. That is, the ftrace trampoline can be dynamically allocated and be called directly by functions that only have a single hook to them" * tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits) tracing: Truncated output is better than nothing tracing: Add additional marks to signal very large time deltas Documentation: describe trace_buf_size parameter more accurately tracing: Allow NOT to filter AND and OR clauses tracing: Add NOT to filtering logic ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter ftrace/x86: Get rid of ftrace_caller_setup ftrace/x86: Have save_mcount_regs macro also save stack frames if needed ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs ftrace/x86: Simplify save_mcount_regs on getting RIP ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file ftrace/x86: Have static tracing also use ftrace_caller_setup ftrace/x86: Have static function tracing always test for function graph kprobes: Add IPMODIFY flag to kprobe_ftrace_ops ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict kprobes/ftrace: Recover original IP if pre_handler doesn't change it tracing/trivial: Fix typos and make an int into a bool tracing: Deletion of an unnecessary check before iput() ...
2014-12-10Merge branch 'akpm' (patchbomb from Andrew)Linus Torvalds11-36/+56
Merge first patchbomb from Andrew Morton: - a few minor cifs fixes - dma-debug upadtes - ocfs2 - slab - about half of MM - procfs - kernel/exit.c - panic.c tweaks - printk upates - lib/ updates - checkpatch updates - fs/binfmt updates - the drivers/rtc tree - nilfs - kmod fixes - more kernel/exit.c - various other misc tweaks and fixes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) exit: pidns: fix/update the comments in zap_pid_ns_processes() exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting exit: exit_notify: re-use "dead" list to autoreap current exit: reparent: call forget_original_parent() under tasklist_lock exit: reparent: avoid find_new_reaper() if no children exit: reparent: introduce find_alive_thread() exit: reparent: introduce find_child_reaper() exit: reparent: document the ->has_child_subreaper checks exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper() exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting exit: proc: don't try to flush /proc/tgid/task/tgid exit: release_task: fix the comment about group leader accounting exit: wait: drop tasklist_lock before psig->c* accounting exit: wait: don't use zombie->real_parent exit: wait: cleanup the ptrace_reparented() checks usermodehelper: kill the kmod_thread_locker logic usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper() fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races ...
2014-12-10rtc: omap: drop vendor-prefix from power-controller dt propertyJohan Hovold1-1/+1
Drop the vendor-prefix from the "ti,system-power-controller" device-tree property name. It has been agreed to make "system-power-controller" a standard property and to drop the vendor-prefix that is currently used by several drivers. Note that drivers that have used "<vendor>,system-power-controller" in a released kernel will need to support both versions. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ARM: dts: am335x-boneblack: enable power off and rtc wake upJohan Hovold1-0/+4
Configure the RTC as system-power controller, which allows the system to be powered off as well as woken up again on subsequent RTC alarms. Note that the PMIC needs to be put in SLEEP (rather than OFF) mode to maintain RTC power. Specifically, this means that the PMIC ti,pmic-shutdown-controller property must be left unset in order to be able to wake up on RTC alarms. Tested on BeagleBone Black (rev A5). Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ARM: dts: am33xx: update rtc-node compatible propertyJohan Hovold1-1/+1
Enable am33xx specific RTC features (e.g. PMIC control) by adding "ti,am3352-rtc" to the compatible property of the rtc node. Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10tile: use pr_warn instead of pr_warningJoe Perches1-18/+15
Use the more common pr_warn. Coalesce formats, realign arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10tile: neaten early_printk usesJoe Perches1-7/+5
Coalesce the formats and align arguments. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10printk: remove used-once early_vprintkJoe Perches1-6/+13
Eliminate the unlikely possibility of message interleaving for early_printk/early_vprintk use. early_vprintk can be done via the %pV extension so remove this unnecessary function and change early_printk to have the equivalent vprintk code. All uses of early_printk already end with a newline so also remove the unnecessary newline from the early_printk function. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ppc/cell: replace get_unused_fd() with get_unused_fd_flags(0)Yann Droneaud1-2/+2
This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10ia64: replace get_unused_fd() with get_unused_fd_flags(0)Yann Droneaud1-1/+1
This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. In a further patch, get_unused_fd() will be removed so that new code start using get_unused_fd_flags(), with the hope O_CLOEXEC could be used, either by default or choosen by userspace. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10mm: fix huge zero page accounting in smaps reportKirill A. Shutemov4-0/+14
As a small zero page, huge zero page should not be accounted in smaps report as normal page. For small pages we rely on vm_normal_page() to filter out zero page, but vm_normal_page() is not designed to handle pmds. We only get here due hackish cast pmd to pte in smaps_pte_range() -- pte and pmd format is not necessary compatible on each and every architecture. Let's add separate codepath to handle pmds. follow_trans_huge_pmd() will detect huge zero page for us. We would need pmd_dirty() helper to do this properly. The patch adds it to THP-enabled architectures which don't yet have one. [akpm@linux-foundation.org: use do_div to fix 32-bit build] Signed-off-by: "Kirill A. Shutemov" <kirill@shutemov.name> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengwei Yin <yfw.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10sh: off by one BUG_ON() in setup_bootmem_node()Dan Carpenter1-1/+1
This off by one bug is harmless but it upsets the static checkers and the code is obvious so it doesn't hurt to fix it. The Smatch warning is: arch/sh/mm/numa.c:47 setup_bootmem_node() error: buffer overflow 'node_data' 1024 <= 1024 Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-10Merge branch 'for-linus' of ↵Linus Torvalds6-19/+18
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS changes from Al Viro: "First pile out of several (there _definitely_ will be more). Stuff in this one: - unification of d_splice_alias()/d_materialize_unique() - iov_iter rewrite - killing a bunch of ->f_path.dentry users (and f_dentry macro). Getting that completed will make life much simpler for unionmount/overlayfs, since then we'll be able to limit the places sensitive to file _dentry_ to reasonably few. Which allows to have file_inode(file) pointing to inode in a covered layer, with dentry pointing to (negative) dentry in union one. Still not complete, but much closer now. - crapectomy in lustre (dead code removal, mostly) - "let's make seq_printf return nothing" preparations - assorted cleanups and fixes There _definitely_ will be more piles" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) copy_from_iter_nocache() new helper: iov_iter_kvec() csum_and_copy_..._iter() iov_iter.c: handle ITER_KVEC directly iov_iter.c: convert copy_to_iter() to iterate_and_advance iov_iter.c: convert copy_from_iter() to iterate_and_advance iov_iter.c: get rid of bvec_copy_page_{to,from}_iter() iov_iter.c: convert iov_iter_zero() to iterate_and_advance iov_iter.c: convert iov_iter_get_pages_alloc() to iterate_all_kinds iov_iter.c: convert iov_iter_get_pages() to iterate_all_kinds iov_iter.c: convert iov_iter_npages() to iterate_all_kinds iov_iter.c: iterate_and_advance iov_iter.c: macros for iterating over iov_iter kill f_dentry macro dcache: fix kmemcheck warning in switch_names new helper: audit_file() nfsd_vfs_write(): use file_inode() ncpfs: use file_inode() kill f_dentry uses lockd: get rid of ->f_path.dentry->d_sb ...
2014-12-10Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds8-24/+87
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loading updates from Ingo Molnar: "The main changes in this cycle are: - Reload microcode when resuming and the case when only the early loader has been utilized. (Borislav Petkov) - Also, do not load the driver on paravirt guests. (Boris Ostrovsky)" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/intel: Fish out the stashed microcode for the BSP x86, microcode: Reload microcode on resume x86, microcode: Don't initialize microcode code on paravirt x86, microcode, intel: Drop unused parameter x86, microcode, AMD: Do not use smp_processor_id() in preemtible context
2014-12-10Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds16-200/+190
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso updates from Ingo Molnar: "Various vDSO updates from Andy Lutomirski, mostly cleanups and reorganization to improve maintainability, but also some micro-optimizations and robustization changes" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64/vsyscall: Restore orig_ax after vsyscall seccomp x86_64: Add a comment explaining the TASK_SIZE_MAX guard page x86_64,vsyscall: Make vsyscall emulation configurable x86_64, vsyscall: Rewrite comment and clean up headers in vsyscall code x86_64, vsyscall: Turn vsyscalls all the way off when vsyscall==none x86,vdso: Use LSL unconditionally for vgetcpu x86: vdso: Fix build with older gcc x86_64/vdso: Clean up vgetcpu init and merge the vdso initcalls x86_64/vdso: Remove jiffies from the vvar page x86/vdso: Make the PER_CPU segment 32 bits x86/vdso: Make the PER_CPU segment start out accessed x86/vdso: Change the PER_CPU segment to use struct desc_struct x86_64/vdso: Move getcpu code from vsyscall_64.c to vdso/vma.c x86_64/vsyscall: Move all of the gate_area code to vsyscall_64.c
2014-12-10Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds5-46/+112
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS update from Ingo Molnar: "The biggest change in this cycle is better support for UCNA (UnCorrected No Action) events: "Handle all uncorrected error reports in the same way (soft offline the page). We used to only do that for SRAO (software recoverable action optional) machine checks, but it makes sense to also do it for UCNA (UnCorrected No Action) logs found by CMCI or polling." plus various x86 MCE handling updates and fixes" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Spell "panicked" correctly x86, mce: Support memory error recovery for both UCNA and Deferred error in machine_check_poll x86, mce, severity: Extend the the mce_severity mechanism to handle UCNA/DEFERRED error x86, MCE, AMD: Assign interrupt handler only when bank supports it x86, MCE, AMD: Drop software-defined bank in error thresholding x86, MCE, AMD: Move invariant code out from loop body x86, MCE, AMD: Correct thresholding error logging x86, MCE, AMD: Use macros to compute bank MSRs RAS, HWPOISON: Fix wrong error recovery status GHES: Make ghes_estatus_caches static APEI, GHES: Cleanup unnecessary function for lockless list
2014-12-10Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds23-340/+468
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm tree changes from Ingo Molnar: "The biggest change is full PAT support from Jürgen Gross: The x86 architecture offers via the PAT (Page Attribute Table) a way to specify different caching modes in page table entries. The PAT MSR contains 8 entries each specifying one of 6 possible cache modes. A pte references one of those entries via 3 bits: _PAGE_PAT, _PAGE_PWT and _PAGE_PCD. The Linux kernel currently supports only 4 different cache modes. The PAT MSR is set up in a way that the setting of _PAGE_PAT in a pte doesn't matter: the top 4 entries in the PAT MSR are the same as the 4 lower entries. This results in the kernel not supporting e.g. write-through mode. Especially this cache mode would speed up drivers of video cards which now have to use uncached accesses. OTOH some old processors (Pentium) don't support PAT correctly and the Xen hypervisor has been using a different PAT MSR configuration for some time now and can't change that as this setting is part of the ABI. This patch set abstracts the cache mode from the pte and introduces tables to translate between cache mode and pte bits (the default cache mode "write back" is hard-wired to PAT entry 0). The tables are statically initialized with values being compatible to old processors and current usage. As soon as the PAT MSR is changed (or - in case of Xen - is read at boot time) the tables are changed accordingly. Requests of mappings with special cache modes are always possible now, in case they are not supported there will be a fallback to a compatible but slower mode. Summing it up, this patch set adds the following features: - capability to support WT and WP cache modes on processors with full PAT support - processors with no or uncorrect PAT support are still working as today, even if WT or WP cache mode are selected by drivers for some pages - reduction of Xen special handling regarding cache mode Another change is a boot speedup on ridiculously large RAM systems, plus other smaller fixes" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86: mm: Move PAT only functions to mm/pat.c xen: Support Xen pv-domains using PAT x86: Enable PAT to use cache mode translation tables x86: Respect PAT bit when copying pte values between large and normal pages x86: Support PAT bit in pagetable dump for lower levels x86: Clean up pgtable_types.h x86: Use new cache mode type in memtype related functions x86: Use new cache mode type in mm/ioremap.c x86: Use new cache mode type in setting page attributes x86: Remove looking for setting of _PAGE_PAT_LARGE in pageattr.c x86: Use new cache mode type in track_pfn_remap() and track_pfn_insert() x86: Use new cache mode type in mm/iomap_32.c x86: Use new cache mode type in asm/pgtable.h x86: Use new cache mode type in arch/x86/mm/init_64.c x86: Use new cache mode type in arch/x86/pci x86: Use new cache mode type in drivers/video/fbdev/vermilion x86: Use new cache mode type in drivers/video/fbdev/gbefb.c x86: Use new cache mode type in include/asm/fb.h x86: Make page cache mode a real type x86: mm: Use 2GB memory block size on large-memory x86-64 systems ...
2014-12-10Merge branches 'x86-platform-for-linus' and 'x86-uv-for-linus' of ↵Linus Torvalds4-24/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: "A handful of numachip APIC driver updates/fixes, and two small SGI/UV fixes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: numachip: APIC driver cleanups x86: numachip: Elide self-IPI ICR polling x86: numachip: Fix 16-bit APIC ID truncation * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: UV BAU: Increase maximum CPUs per socket/hub x86: UV BAU: Avoid NULL pointer reference in ptc_seq_show
2014-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-10/+8
Conflicts: drivers/net/ethernet/amd/xgbe/xgbe-desc.c drivers/net/ethernet/renesas/sh_eth.c Overlapping changes in both conflict cases. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds7-23/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "Changes in this cycle are: - support module unload for efivarfs (Mathias Krause) - another attempt at moving x86 to libstub taking advantage of the __pure attribute (Ard Biesheuvel) - add EFI runtime services section to ptdump (Mathias Krause)" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, ptdump: Add section for EFI runtime services efi/x86: Move x86 back to libstub efivarfs: Allow unloading when build as module
2014-12-10Merge branches 'x86-build-for-linus', 'x86-cleanups-for-linus' and ↵Linus Torvalds9-26/+23
'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build, cleanup and defconfig updates from Ingo Molnar: "A single minor build change to suppress a repetitive build messages, misc cleanups and a defconfig update" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/purgatory, build: Suppress kexec-purgatory.c is up to date message * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, CPU, AMD: Move K8 TLB flush filter workaround to K8 code x86, espfix: Remove stale ptemask x86, msr: Use seek definitions instead of hard-coded values x86, msr: Convert printk to pr_foo() x86, msr: Use PTR_ERR_OR_ZERO x86/simplefb: Use PTR_ERR_OR_ZERO x86/sysfb: Use PTR_ERR_OR_ZERO x86, cpuid: Use PTR_ERR_OR_ZERO * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig/defconfig: Enable CONFIG_FHANDLE=y
2014-12-10net, lib: kill arch_fast_hash library bitsDaniel Borkmann31-128/+1
As there are now no remaining users of arch_fast_hash(), lets kill it entirely. This basically reverts commit 71ae8aac3e19 ("lib: introduce arch optimized hash library") and follow-up work, that is f.e., commit 237217546d44 ("lib: hash: follow-up fixups for arch hash"), commit e3fec2f74f7f ("lib: Add missing arch generic-y entries for asm-generic/hash.h") and last but not least commit 6a02652df511 ("perf tools: Fix include for non x86 architectures"). Cc: Francesco Fusco <fusco@ntop.org> Cc: Thomas Graf <tgraf@suug.ch> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10Merge branch 'x86-boot-for-linus' of ↵Linus Torvalds8-30/+103
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot and percpu updates from Ingo Molnar: "This tree contains a bootable images documentation update plus three slightly misplaced x86/asm percpu changes/optimizations" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64: Use RIP-relative addressing for most per-CPU accesses x86-64: Handle PC-relative relocations on per-CPU data x86: Convert a few more per-CPU items to read-mostly ones x86, boot: Document intermediates more clearly
2014-12-10Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds7-41/+51
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "Misc changes: - context switch micro-optimization - debug printout micro-optimization - comment enhancements and typo fix" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Replace seq_printf() with seq_puts() x86/asm: Fix typo in arch/x86/kernel/asm_offset_64.c sched/x86: Add a comment clarifying LDT context switching sched/x86_64: Don't save flags on context switch
2014-12-10Merge branch 'x86-mpx-for-linus' of ↵Linus Torvalds24-43/+1297
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 MPX support from Thomas Gleixner: "This enables support for x86 MPX. MPX is a new debug feature for bound checking in user space. It requires kernel support to handle the bound tables and decode the bound violating instruction in the trap handler" * 'x86-mpx-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: asm-generic: Remove asm-generic arch_bprm_mm_init() mm: Make arch_unmap()/bprm_mm_init() available to all architectures x86: Cleanly separate use of asm-generic/mm_hooks.h x86 mpx: Change return type of get_reg_offset() fs: Do not include mpx.h in exec.c x86, mpx: Add documentation on Intel MPX x86, mpx: Cleanup unused bound tables x86, mpx: On-demand kernel allocation of bounds tables x86, mpx: Decode MPX instruction to get bound violation information x86, mpx: Add MPX-specific mmap interface x86, mpx: Introduce VM_MPX to indicate that a VMA is MPX specific x86, mpx: Add MPX to disabled features ia64: Sync struct siginfo with general version mips: Sync struct siginfo with general version mpx: Extend siginfo structure to include bound violation information x86, mpx: Rename cfg_reg_u and status_reg x86: mpx: Give bndX registers actual names x86: Remove arbitrary instruction size limit in instruction decoder
2014-12-10Merge branch 'irq-irqdomain-for-linus' of ↵Linus Torvalds25-105/+81
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq domain updates from Thomas Gleixner: "The real interesting irq updates: - Support for hierarchical irq domains: For complex interrupt routing scenarios where more than one interrupt related chip is involved we had no proper representation in the generic interrupt infrastructure so far. That made people implement rather ugly constructs in their nested irq chip implementations. The main offenders are x86 and arm/gic. To distangle that mess we have now hierarchical irqdomains which seperate the various interrupt chips and connect them via the hierarchical domains. That keeps the domain specific details internal to the particular hierarchy level and removes the criss/cross referencing of chip internals. The resulting hierarchy for a complex x86 system will look like this: vector mapped: 74 msi-0 mapped: 2 dmar-ir-1 mapped: 69 ioapic-1 mapped: 4 ioapic-0 mapped: 20 pci-msi-2 mapped: 45 dmar-ir-0 mapped: 3 ioapic-2 mapped: 1 pci-msi-1 mapped: 2 htirq mapped: 0 Neither ioapic nor pci-msi know about the dmar interrupt remapping between themself and the vector domain. If interrupt remapping is disabled ioapic and pci-msi become direct childs of the vector domain. In hindsight we should have done that years ago, but in hindsight we always know better :) - Support for generic MSI interrupt domain handling We have more and more non PCI related MSI interrupts, so providing a generic infrastructure for this is better than having all affected architectures implementing their own private hacks. - Support for PCI-MSI interrupt domain handling, based on the generic MSI support. This part carries the pci/msi branch from Bjorn Helgaas pci tree to avoid a massive conflict. The PCI/MSI parts are acked by Bjorn. I have two more branches on top of this. The full conversion of x86 to hierarchical domains and a partial conversion of arm/gic" * 'irq-irqdomain-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) genirq: Move irq_chip_write_msi_msg() helper to core PCI/MSI: Allow an msi_controller to be associated to an irq domain PCI/MSI: Provide mechanism to alloc/free MSI/MSIX interrupt from irqdomain PCI/MSI: Enhance core to support hierarchy irqdomain PCI/MSI: Move cached entry functions to irq core genirq: Provide default callbacks for msi_domain_ops genirq: Introduce msi_domain_alloc/free_irqs() asm-generic: Add msi.h genirq: Add generic msi irq domain support genirq: Introduce callback irq_chip.irq_write_msi_msg genirq: Work around __irq_set_handler vs stacked domains ordering issues irqdomain: Introduce helper function irq_domain_add_hierarchy() irqdomain: Implement a method to automatically call parent domains alloc/free genirq: Introduce helper irq_domain_set_info() to reduce duplicated code genirq: Split out flow handler typedefs into seperate header file genirq: Add IRQ_SET_MASK_OK_DONE to support stacked irqchip genirq: Introduce irq_chip.irq_compose_msi_msg() to support stacked irqchip genirq: Add more helper functions to support stacked irq_chip genirq: Introduce helper functions to support stacked irq_chip irqdomain: Do irq_find_mapping and set_type for hierarchy irqdomain in case OF ...
2014-12-10Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "This is the first (boring) part of irq updates: - support for big endian I/O accessors in the generic irq chip - cleanup of brcmstb/bcm7120 drivers so they can be reused for non ARM SoCs - the usual pile of fixes and updates for the various ARM irq chips" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip: dw-apb-ictl: Add PM support irqchip: dw-apb-ictl: Enable IRQ_GC_MASK_CACHE_PER_TYPE irqchip: dw-apb-ictl: Always use use {readl|writel}_relaxed ARM: orion: convert the irq_reg_{readl,writel} calls to the new API irqchip: atmel-aic: Add missing entry for rm9200 irq fixups irqchip: atmel-aic: Rename at91sam9_aic_irq_fixup for naming consistency irqchip: atmel-aic: Add specific irq fixup function for sam9g45 and sam9rl irqchip: atmel-aic: Add irq fixups for at91sam926x SoCs irqchip: atmel-aic: Add irq fixup for RTT block irqchip: brcmstb-l2: Convert driver to use irq_reg_{readl,writel} irqchip: bcm7120-l2: Convert driver to use irq_reg_{readl,writel} irqchip: bcm7120-l2: Decouple driver from brcmstb-l2 irqchip: bcm7120-l2: Extend driver to support 64+ bit controllers irqchip: bcm7120-l2: Use gc->mask_cache to simplify suspend/resume functions irqchip: bcm7120-l2: Fix missing nibble in gc->unused mask irqchip: bcm7120-l2: Make sure all register accesses use base+offset irqchip: bcm7120-l2, brcmstb-l2: Remove ARM Kconfig dependency irqchip: bcm7120-l2: Eliminate bad IRQ check irqchip: brcmstb-l2: Eliminate dependency on ARM code genirq: Generic chip: Add big endian I/O accessors ...
2014-12-10x86/microcode/intel: Fish out the stashed microcode for the BSPBorislav Petkov1-14/+12
I'm such a moron! The simple solution of saving the BSP patch for use on resume was too simple (and wrong!), hint: sizeof(struct microcode_intel). What needs to be done instead is to fish out the microcode patch we have stashed previously and apply that on the BSP in case the late loader hasn't been utilized. So do that instead. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20141208110820.GB20057@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-12-09Merge branch 'sched-core-for-linus' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - 'Nested Sleep Debugging', activated when CONFIG_DEBUG_ATOMIC_SLEEP=y. This instruments might_sleep() checks to catch places that nest blocking primitives - such as mutex usage in a wait loop. Such bugs can result in hard to debug races/hangs. Another category of invalid nesting that this facility will detect is the calling of blocking functions from within schedule() -> sched_submit_work() -> blk_schedule_flush_plug(). There's some potential for false positives (if secondary blocking primitives themselves are not ready yet for this facility), but the kernel will warn once about such bugs per bootup, so the warning isn't much of a nuisance. This feature comes with a number of fixes, for problems uncovered with it, so no messages are expected normally. - Another round of sched/numa optimizations and refinements, for CONFIG_NUMA_BALANCING=y. - Another round of sched/dl fixes and refinements. Plus various smaller fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) sched: Add missing rcu protection to wake_up_all_idle_cpus sched/deadline: Introduce start_hrtick_dl() for !CONFIG_SCHED_HRTICK sched/numa: Init numa balancing fields of init_task sched/deadline: Remove unnecessary definitions in cpudeadline.h sched/cpupri: Remove unnecessary definitions in cpupri.h sched/deadline: Fix rq->dl.pushable_tasks bug in push_dl_task() sched/fair: Fix stale overloaded status in the busiest group finding logic sched: Move p->nr_cpus_allowed check to select_task_rq() sched/completion: Document when to use wait_for_completion_io_*() sched: Update comments about CLONE_NEWUTS and CLONE_NEWIPC sched/fair: Kill task_struct::numa_entry and numa_group::task_list sched: Refactor task_struct to use numa_faults instead of numa_* pointers sched/deadline: Don't check CONFIG_SMP in switched_from_dl() sched/deadline: Reschedule from switched_from_dl() after a successful pull sched/deadline: Push task away if the deadline is equal to curr during wakeup sched/deadline: Add deadline rq status print sched/deadline: Fix artificial overrun introduced by yield_task_dl() sched/rt: Clean up check_preempt_equal_prio() sched/core: Use dl_bw_of() under rcu_read_lock_sched() sched: Check if we got a shallowest_idle_cpu before searching for least_loaded_cpu ...
2014-12-09Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull leftover perf fixes from Ingo Molnar: "Two perf fixes left over from the previous cycle" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf session: Do not fail on processing out of order event x86/asm/traps: Disable tracing and kprobes in fixup_bad_iret and sync_regs
2014-12-09Merge branch 'perf-core-for-linus' of ↵Linus Torvalds6-29/+83
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events update from Ingo Molnar: "On the kernel side there's few changes, the one that stands out is PEBS machine state sampling support on x86, by Stephane Eranian. On the tooling side: User visible tooling changes: - Don't open the DWARF info multiple times, keeping instead a dwfl handle in struct dso, greatly speeding up 'perf report' on powerpc. (Sukadev Bhattiprolu) - Introduce PARSE_OPT_DISABLED option flag and use it to avoid showing undersired options in tools that provides frontends to 'perf record', like sched, kvm, etc (Namhyung Kim) - Fallback to kallsyms when using the minimal 'ELF' loader (Arnaldo Carvalho de Melo) - Fix annotation with kcore (Adrian Hunter) - Support source line numbers in annotate using a hotkey (Andi Kleen) - Callchain improvements including: * Enable printing the srcline in the history * Make get_srcline fall back to sym+offset (Andi Kleen) - TUI hist_entry browser fixes, including showing missing overhead value for first level callchain. Detected comparing the output of --stdio/--gui (that matched) with --tui, that had this problem. (Namhyung Kim) - Support handling complete branch stacks as histograms (Andi Kleen) Tooling infrastructure changes: - Prep work for supporting per-pkg and snapshot counters in 'perf stat' (Jiri Olsa) - 'perf stat' refactorings, moving stuff from it to evsel.c to use in per-pkg/snapshot format changes (Jiri Olsa) - Add per-pkg format file parsing (Matt Fleming) - Clean up libelf feature support code (Namhyung Kim) - Add gzip decompression support for kernel modules (Namhyung Kim) - More prep patches for Intel PT, including a a thread stack and more stuff made available via the database export mechanism (Adrian Hunter) - More Intel PT work, including a facility to export sample data (comms, threads, symbol names, etc) in a database friendly way, with an script to use this to create a postgresql database. (Adrian Hunter) - Make sure that thread->mg->machine points to the machine where the thread exists (it was being set only for the kmaps kernel modules case, do it as well for the mmaps) and use it to shorten function signatures (Arnaldo Carvalho de Melo) ... and lots of other fixes and smaller improvements" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits) perf report: In branch stack mode use address history sorting perf report: Add --branch-history option perf callchain: Support handling complete branch stacks as histograms perf stat: Add support for snapshot counters perf stat: Add support for per-pkg counters perf tools: Remove perf_evsel__read interface perf stat: Use read_counter in read_counter_aggr perf stat: Make read_counter work over the thread dimension perf stat: Use perf_evsel__read_cb in read_counter perf tools: Add snapshot format file parsing perf tools: Add per-pkg format file parsing perf evsel: Introduce perf_evsel__read_cb function perf evsel: Introduce perf_counts_values__scale function perf evsel: Introduce perf_evsel__compute_deltas function perf tools: Allow to force redirect pr_debug to stderr. perf tools: Fix segfault due to invalid kernel dso access perf callchain: Make get_srcline fall back to sym+offset perf symbols: Move bfd_demangle stubbing to its only user perf callchain: Enable printing the srcline in the history perf tools: Collapse first level callchain entry if it has sibling ...
2014-12-09Merge branch 'core-locking-for-linus' of ↵Linus Torvalds1-1/+13
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking tree changes from Ingo Molnar: "Two changes: a documentation update and a ticket locks live lock fix" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ticketlock: Fix spin_unlock_wait() livelock locking/lglocks: Add documentation of current lglocks implementation
2014-12-09Merge tag 'asm-generic-for-linus' of ↵Linus Torvalds30-232/+194
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic asm/io.h rewrite from Arnd Bergmann: "While there normally is no reason to have a pull request for asm-generic but have all changes get merged through whichever tree needs them, I do have a series for 3.19. There are two sets of patches that change significant portions of asm/io.h, and this branch contains both in order to resolve the conflicts: - Will Deacon has done a set of patches to ensure that all architectures define {read,write}{b,w,l,q}_relaxed() functions or get them by including asm-generic/io.h. These functions are commonly used on ARM specific drivers to avoid expensive L2 cache synchronization implied by the normal {read,write}{b,w,l,q}, but we need to define them on all architectures in order to share the drivers across architectures and to enable CONFIG_COMPILE_TEST configurations for them - Thierry Reding has done an unrelated set of patches that extends the asm-generic/io.h file to the degree necessary to make it useful on ARM64 and potentially other architectures" * tag 'asm-generic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (29 commits) ARM64: use GENERIC_PCI_IOMAP sparc: io: remove duplicate relaxed accessors on sparc32 ARM: sa11x0: Use void __iomem * in MMIO accessors arm64: Use include/asm-generic/io.h ARM: Use include/asm-generic/io.h asm-generic/io.h: Implement generic {read,write}s*() asm-generic/io.h: Reconcile I/O accessor overrides /dev/mem: Use more consistent data types Change xlate_dev_{kmem,mem}_ptr() prototypes ARM: ixp4xx: Properly override I/O accessors ARM: ixp4xx: Fix build with IXP4XX_INDIRECT_PCI ARM: ebsa110: Properly override I/O accessors ARC: Remove redundant PCI_IOBASE declaration documentation: memory-barriers: clarify relaxed io accessor semantics x86: io: implement dummy relaxed accessor macros for writes tile: io: implement dummy relaxed accessor macros for writes sparc: io: implement dummy relaxed accessor macros for writes powerpc: io: implement dummy relaxed accessor macros for writes parisc: io: implement dummy relaxed accessor macros for writes mn10300: io: implement dummy relaxed accessor macros for writes ...
2014-12-09Merge tag 'arm64-for-linus' of ↵Linus Torvalds13-8/+704
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM64 SoC changes from Arnd Bergmann: "This adds support for two new ARM64 platforms: - ARM Juno - AMD Seattle We had submissions for a number of additional platforms from Samsung, Freescale and Spreadtrum but are still working out the best process for getting these merged" * tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: amd-seattle: Fix PCI bus range due to SMMU limitation arm64: ARM: Fix the Generic Timers interrupt active level description arm64: amd-seattle: Adding device tree for AMD Seattle platform arm64: Add Juno board device tree. arm64: Create link to include/dt-bindings to enable C preprocessor use.
2014-12-09Merge tag 'defconfig-for-linus' of ↵Linus Torvalds15-6/+119
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig changes from Arnd Bergmann: "This is a collection of the various changes to defconfig files, most importantly enabling some additional platforms in the multi_v7_defconfig file. These are split out into a separate branch to avoid most of the merge conflicts in the defconfig files. This also touches 12 other defconfig files for shmobile, at91, hisilicon, keystone, mvebu, omap, and tegra" * tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (36 commits) ARM: omap2plus_defconfig: enable ECAP and EHRPWM ARM: omap2plus_defconfig: enable XHCI ARM: omap2plus_defconfig: enable AM33XX SoC sound ARM: omap2plus_defconfig: enable EDT FT5X06 touchscreen ARM: omap2plus_defconfig: remove unwanted ethernet drivers ARM: multi_v7_defconfig: enable MAX77686 PMIC drivers for exynos4412-prime based SoCs ARM: at91/defconfig: add DM9000 to at91_dt ARM: at91/defconfig: add QT1070 to at91_dt ARM: at91/defconfig: add TCB PWM driver selection ARM: at91/defconfig: add the XDMA driver ARM: at91: sama5: update defconfig ARM: defconfig: imx_v6_v7_defconfig updates ARM: multi_v7_defconfig: add driver support for hix5hd2 ARM: exynos_defconfig: Use 16 minors per MMC block device ARM: mvebu: add MTD_BLOCK to mvebu_v7_defconfig ARM: mvebu: enable i2c device in mvebu_v7_defconfig ARM: mvebu: re-enable SDHCI driver for Armada 38x SoC in v7 defconfig ARM: tegra: Regenerate default configuration ARM: multi_v7_defconfig: Enable cgroups ARM: multi_v7_defconfig: Enable Broadcom Cygnus ...
2014-12-09Merge tag 'omap-gpmc-for-linus' of ↵Linus Torvalds22-3153/+43
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC/OMAP GPMC driver cleanup and move from Arnd Bergmann: "The GPMC driver has traditionally been considered a part of the OMAP platform code and tightly interweaved with some of the boards. With this cleanup, it has finally come to the point where it makes sense to move it out of arch/arm into drivers/memory, where we already have other drivers for similar hardware. The cleanups are still ongoing, with the goal of eventually having a standalone driver that does not require an interface to architecture code. This is a separate branch because of dependencies on multiple other branches, and to keep the drivers changes separate from the normal cleanups" * tag 'omap-gpmc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: memory: gpmc: Move omap gpmc code to live under drivers ARM: OMAP2+: Move GPMC initcall to devices.c ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header ARM: OMAP2+: Remove unnecesary include in GPMC driver ARM: OMAP2+: Drop board file for 3430sdp ARM: OMAP2+: Drop board file for ti8168evm ARM: OMAP2+: Drop legacy code for gpmc-smc91x.c ARM: OMAP2+: Require proper GPMC timings for devices ARM: OMAP2+: Show bootloader GPMC timings to allow configuring the .dts file ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select ARM: OMAP2+: gpmc: Sanity check GPMC fck on probe ARM: OMAP2+: gpmc: Keep Chip Select disabled while configuring it ARM: OMAP2+: gpmc: Always enable A26-A11 for non NAND devices ARM: OMAP2+: gpmc: Error out if timings fail in gpmc_probe_generic_child() ARM: OMAP2+: gpmc: Print error message in set_gpmc_timing_reg()
2014-12-09Merge tag 'dt-for-linus' of ↵Linus Torvalds271-3318/+20094
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "The DT branch adds a lot of new stuff for additional SoC and board support. The branch is the largest one and contains 513 out of the total 972 non-merge arm-soc changesets for 3.19. Most of the changes are about enabling additional on-chip devices for existing machines, but there are also an unusual number of new SoC types being added this time: - AMLogic Meson8 - ARM Realview in DT mode - Allwinner A80 - Broadcom BCM47081 - Broadcom Cygnus - Freescale LS1021A - Freescale Vybrid 500 series - Mediatek MT6592, MT8127, MT8135 - STMicroelectronics STiH410 - Samsung Exynos4415 The level of support for the above differs widely, some are just stubs with nothing more than CPU, memory and a UART, but others are fairly complete. As usual, these get extended over time. There are also many new boards getting added, this is the list of model strings that are showing up in new dts files: - ARM RealView PB1176 - Altera SOCFPGA Arria 10 - Asus RT-N18U (BCM47081) - Buffalo WZR-1750DHP (BCM4708) - Buffalo WZR-600DHP2 (BCM47081) - Cygnus Enterprise Phone (BCM911360_ENTPHN) - D-Link DIR-665 - Google Spring - IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) - IGEPv2 Rev. F (TI OMAP AM/DM37x) - LS1021A QDS Board - LS1021A TWR Board - LeMaker Banana Pi - MarsBoard RK3066 - MediaTek MT8127 Moose Board - MediaTek MT8135 evaluation board - Mele M3 - Merrii A80 Optimus Board - Netgear R6300 V2 (BCM4708) - Nomadik STN8815NHK - NovaTech OrionLXm - Olimex A20-OLinuXino-LIME2 - Raspberry Pi Model B+ - STiH410 B2120 - Samsung Monk board - Samsung Rinato board - Synology DS213j - Synology DS414 - TBS2910 Matrix ARM mini PC - TI AM5728 BeagleBoard-X15 - Toradex Colibri VF50 on Colibri Evaluation Board - Zynq ZYBO Development Board Other notable changes include: - exynos: cleanup of existing dts files - mvebu: improved pinctrl support for Armada 370/XP - nomadik: restructuring dts files - omap: added CAN bus support - shmobile: added clock support for some SoCs - shmobile: added sound support for some SoCs - sirf: reset controller support - sunxi: continuing the relicensing under dual GPL/MIT - sunxi: lots of new on-chip device support - sunxi: working simplefb support (long awaited) - various: provide stdout-path property for earlycon" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (510 commits) ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured Revert "ARM: dts: rockchip: temporarily disable smp on rk3288" ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 ARM: BCM5301X: Add DT for Asus RT-N18U ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP ARM: BCM5301X: Add DT for Netgear R6300 V2 ARM: BCM5301X: Add buttons for Netgear R6250 ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file arm: dts: zynq: Add Digilent ZYBO board arm: dts: zynq: Move crystal freq. to board level doc: dt: vendor-prefixes: Add Digilent Inc Documentation: devicetree: Fix Xilinx VDMA specification ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188 ARM: dts: rockchip: add label property for leds on Radxa Rock ARM: BCM5301X: Add LEDs for Netgear R6250 V1 ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file ARM: dts: add sysreg phandle to i2c device nodes for exynos ARM: dts: Remove unused bootargs from exynos3250-rinato ARM: dts: add board dts file for Exynos3250-based Monk board ...

Privacy Policy