path: root/net/ieee802154/nl-mac.c
AgeCommit message (Collapse)AuthorFilesLines
2015-05-26ieee802154: Remove 802.15.4/6LoWPAN checks for interface MTU.Lennert Buytenhek1-14/+3
In the past, 802.15.4 interfaces and 6LoWPAN interfaces used the same dev->type (ARPHRD_IEEE802154), and 802.15.4 interfaces were distinguished from 6LoWPAN interfaces by their differing dev->mtu. 6LoWPAN interfaces have their own ARPHRD type now, so there is no longer any need to check dev->mtu to distinguish 802.15.4 devices from 6LoWPAN devices. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-23mac802154: remove mib lockAlexander Aring1-4/+10
This patch removes the mib lock. The new locking mechanism is to protect the mib values with the rtnl lock. Note that this isn't always necessary if we have an interface up the most mib values are readonly (e.g. address settings). With this behaviour we can remove locking in hotpath like frame parsing completely. It depends on context if we need to hold the rtnl lock or not, this makes the callbacks of ieee802154_mlme_ops unnecessary because these callbacks hols always the locks. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19ieee802154: change cca ed level to mbmAlexander Aring1-2/+2
This patch change the handling of cca energy detection level from dbm to mbm. This prepares to handle floating point cca energy detection levels values. The old netlink 802.15.4 will convert the dbm value to mbm for handling backward compatibility. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-19ieee802154: change transmit power to mbmAlexander Aring1-2/+2
This patch change the handling of transmit power level from dbm to mbm. This prepares to handle floating point transmit power levels values. The old netlink 802.15.4 will convert the dbm value to mbm for handling backward compatibility. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-03-14ieee802154: don't export static symbolJulia Lawall1-1/+0
The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ type T; identifier f; @@ static T f (...) { ... } @@ identifier r.f; declarer name EXPORT_SYMBOL; @@ -EXPORT_SYMBOL(f); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg1-1/+2
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-19ieee802154: rework cca settingAlexander Aring1-2/+2
The current cca setting handle is a driver specific call. We need to introduce some 802.15.4 specific layer and mapping 802.15.4 cca modes to driver specific ones inside the 802.15.4 driver. This patch will add such 802.15.4 layer and mapping the cca settings to driver specific ones. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-12-05net/ieee802154: Remove and add extra blank lines as needed.Stefan Schmidt1-14/+0
Some have been missing and some have been needed. Just cosmetics. Signed-off-by: Stefan Schmidt <s.schmidt@samsung.com> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-26ieee802154: fix spelling mistakesVarka Bhadram1-1/+1
Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-09ieee802154: fix iface dump with lowpanAlexander Aring1-3/+14
This patch adds a hacked solution for an interface dump with a running lowpan interface. This will crash because lowpan and wpan interface use the same arphdr. To change the arphdr will change the UAPI, this patch checks on mtu which should on lowpan interface always different than IEEE802154_MTU. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-09ieee802154: netlink add rtnl lockAlexander Aring1-0/+6
This patch adds rtnl lock hold mechanism while accessing wpan_dev attributes. Furthermore these attributes should be protected by rtnl lock and netif_running only. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05ieee802154: remove mlme get_phy callbackAlexander Aring1-2/+4
This patch removes the get_phy callback from mlme ops structure. Instead we doing a dereference via ieee802154_ptr dev pointer. For backwards compatibility we need to run get_device after dereference wpan_phy via ieee802154_ptr. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-05ieee802154: remove nl802154 unused functionsAlexander Aring1-181/+6
The include/net/nl802154.h file contains a lot of prototypes which are not used inside of ieee802154 subsystem. This patch removes this file and make the only one used prototype "ieee802154_nl_start_confirm" as static declaration in ieee802154/nl-mac.c Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-11-02ieee802154: don't allow to change addr while netif_runningAlexander Aring1-2/+8
This patch changes the actual behaviour for setting address attributes. We should not change addresses while netif_running is true. Furthermore when netif_running is running the address attributes becomes read only and we can remove locking mechanism in receive and transmit hothpaths of 802.15.4 subsystem. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-28mac802154: remove driver ops in wpan-phyAlexander Aring1-17/+2
This patch removes the driver ops callbacks inside of wpan_phy struct. It was used to check if a phy supports this driver ops call. We do this now via hardware flags. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: move ieee802154 headerAlexander Aring1-1/+1
This patch moves the ieee802154 header into include/linux instead include/net. Similar like wireless which have the ieee80211 header inside of include/linux. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: move wpan-phy.h to cfg802154.hAlexander Aring1-1/+1
The wpan-phy header contains the wpan_phy struct information. Later this header will be have similar function like cfg80211 header. The cfg80211 header contains the wiphy struct which is identically the wpan_phy struct inside 802.15.4 subsystem. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-10-25ieee802154: mac802154: remove FSF addressAlexander Aring1-4/+0
This patch removes the FSF address in files which belongs to ieee802154 and mac802154. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-076lowpan: mac802154: fix coding style issuesVarka Bhadram1-21/+27
This patch fixed the coding style issues reported by checkpatch.pl following issues fixed: CHECK: Alignment should match open parenthesis WARNING: line over 80 characters CHECK: Blank lines aren't necessary before a close brace '}' WARNING: networking block comments don't use an empty /* line, use /* Comment... WARNING: Missing a blank line after declarations WARNING: networking block comments start with * on subsequent lines CHECK: braces {} should be used on all arms of this statement Signed-off-by: Varka Bhadram <varkab@cdac.in> Tested-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22ieee802154: missing put_dev() on errorDan Carpenter1-2/+4
We should call put_dev() on the error path here. Fixes: 3e9c156e2c21 ('ieee802154: add netlink interfaces for llsec') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16ieee802154: add netlink interfaces for llsecPhoebe Buckheister1-0/+807
This patch adds user-visible interfaces for the llsec infrastructure. For the added methods, the only major difference between all add/remove implementation lies in how the specific object is parsed, and for dump requests, how objects are written into netlink messages. To save on boilerplate code, table dumps are routed through a helper function that handles netlink dump state, leaving the actual dumping code to care only about iterating over the table to be dumped and filling netlink messages. For add/remove methods, the boilerplate required to work is not quite as large, but still enough to also move into a local helper. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-01mac802154: make csma/cca parameters per-wpanPhoebe Buckheister1-3/+119
Commit 9b2777d6089bcd (ieee802154: add TX power control to wpan_phy) and following erroneously added CSMA and CCA parameters for 802.15.4 devices as PHY parameters, while they are actually MAC parameters and can differ for any two WPAN instances. Since it is now sensible to have multiple WPAN devices with differing CSMA/CCA parameters, make these parameters MAC parameters instead. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14ieee802154: use ieee802154_addr instead of *_sa variantsPhoebe Buckheister1-48/+66
Change all internal uses of ieee802154_addr_sa to ieee802154_addr, except for those instances that communicate directly with userspace. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14ieee802154: enforce consistent endianness in the 802.15.4 stackPhoebe Buckheister1-14/+18
Enable sparse warnings about endianness, replace the remaining fields regarding network operations without explicit endianness annotations with such that are annotated, and propagate this through the entire stack. Uses of ieee802154_addr_sa are not changed yet, this patch is only concerned with all other fields (such as address filters, operation parameters and the likes). Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14ieee802154: rename struct ieee802154_addr to *_saPhoebe Buckheister1-6/+6
The struct as currently defined uses host byte order for some fields, and most big endian/EUI display byte order for other fields. Inside the stack, endianness should ideally match network byte order where possible to minimize the number of byteswaps done in critical paths, but this patch does not address this; it is only preparatory. Signed-off-by: Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: make multicast groups const, prevent abuseJohannes Berg1-15/+7
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14ieee802154: use genl_register_family_with_ops()Johannes Berg1-52/+9
This simplifies the code since there's no longer a need to have error handling in the registration. Unfortunately it means more extern function declarations are needed, but the overall goal would seem to justify this. While at it, also fix the registration error path - if the family registration failed then it shouldn't be unregistered. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08ieee802154/nl-mac.c: make some MLME operations optionalWerner Almesberger1-5/+20
Check for NULL before calling the following operations from "struct ieee802154_mlme_ops": assoc_req, assoc_resp, disassoc_req, start_req, and scan_req. This fixes a current oops where those functions are called but not implemented. It also updates the documentation to clarify that they are now optional by design. If a call to an unimplemented function is attempted, the kernel returns EOPNOTSUPP via netlink. The following operations are still required: get_phy, get_pan_id, get_short_addr, and get_dsn. Note that the places where this patch changes the initialization of "ret" should not affect the rest of the code since "ret" was always set (again) before returning its value. Signed-off-by: Werner Almesberger <werner@almesberger.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10netlink: Rename pid to portid to avoid confusionEric W. Biederman1-3/+3
It is a frequent mistake to confuse the netlink port identifier with a process identifier. Try to reduce this confusion by renaming fields that hold port identifiers portid instead of pid. I have carefully avoided changing the structures exported to userspace to avoid changing the userspace API. I have successfully built an allyesconfig kernel with this change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-28net: Use NLMSG_DEFAULT_SIZE in combination with nlmsg_new()Thomas Graf1-1/+1
Using NLMSG_GOODSIZE results in multiple pages being used as nlmsg_new() will automatically add the size of the netlink header to the payload thus exceeding the page limit. NLMSG_DEFAULT_SIZE takes this into account. Signed-off-by: Thomas Graf <tgraf@suug.ch> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02ieee802154: Stop using NLA_PUT*().David S. Miller1-75/+71
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker1-0/+1
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-11-06ieee802154: add PHY_NAME to LIST_IFACE command resultsDmitry Eremin-Solenikov1-0/+8
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-11-06ieee802154: split away MAC commands implementationDmitry Eremin-Solenikov1-0/+609
Move all mac-related stuff to separate file so that ieee802154/netlink.c contains only generic code. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

Privacy Policy