path: root/net/xfrm
AgeCommit message (Collapse)AuthorFilesLines
2015-09-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-15/+17
Pull networking updates from David Miller: "Another merge window, another set of networking changes. I've heard rumblings that the lightweight tunnels infrastructure has been voted networking change of the year. But what do I know? 1) Add conntrack support to openvswitch, from Joe Stringer. 2) Initial support for VRF (Virtual Routing and Forwarding), which allows the segmentation of routing paths without using multiple devices. There are some semantic kinks to work out still, but this is a reasonably strong foundation. From David Ahern. 3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov. 4) Ignore route nexthops with a link down state in ipv6, just like ipv4. From Andy Gospodarek. 5) Remove spinlock from fast path of act_gact and act_mirred, from Eric Dumazet. 6) Document the DSA layer, from Florian Fainelli. 7) Add netconsole support to bcmgenet, systemport, and DSA. Also from Florian Fainelli. 8) Add Mellanox Switch Driver and core infrastructure, from Jiri Pirko. 9) Add support for "light weight tunnels", which allow for encapsulation and decapsulation without bearing the overhead of a full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of others. 10) Add Identifier Locator Addressing support for ipv6, from Tom Herbert. 11) Support fragmented SKBs in iwlwifi, from Johannes Berg. 12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia. 13) Add BQL support to 3c59x driver, from Loganaden Velvindron. 14) Stop using a zero TX queue length to mean that a device shouldn't have a qdisc attached, use an explicit flag instead. From Phil Sutter. 15) Use generic geneve netdevice infrastructure in openvswitch, from Pravin B Shelar. 16) Add infrastructure to avoid re-forwarding a packet in software that was already forwarded by a hardware switch. From Scott Feldman. 17) Allow AF_PACKET fanout function to be implemented in a bpf program, from Willem de Bruijn" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits) netfilter: nf_conntrack: make nf_ct_zone_dflt built-in netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled net: fec: clear receive interrupts before processing a packet ipv6: fix exthdrs offload registration in out_rt path xen-netback: add support for multicast control bgmac: Update fixed_phy_register() sock, diag: fix panic in sock_diag_put_filterinfo flow_dissector: Use 'const' where possible. flow_dissector: Fix function argument ordering dependency ixgbe: Resolve "initialized field overwritten" warnings ixgbe: Remove bimodal SR-IOV disabling ixgbe: Add support for reporting 2.5G link speed ixgbe: fix bounds checking in ixgbe_setup_tc for 82598 ixgbe: support for ethtool set_rxfh ixgbe: Avoid needless PHY access on copper phys ixgbe: cleanup to use cached mask value ixgbe: Remove second instance of lan_id variable ixgbe: use kzalloc for allocating one thing flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c ixgbe: Remove unused PCI bus types ...
2015-08-17ipsec: Replace seqniv with seqivHerbert Xu1-7/+7
Now that seqniv is identical with seqiv we no longer need it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-08-11xfrm: Add oif to dst lookupsDavid Ahern1-10/+14
Rules can be installed that direct route lookups to specific tables based on oif. Plumb the oif through the xfrm lookups so it gets set in the flow struct and passed to the resolver routines. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-08-11net/xfrm: use kmemdup rather than duplicating its implementationAndrzej Hajda1-4/+2
The patch was generated using fixed coccinelle semantic patch scripts/coccinelle/api/memdup.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2014320 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-07-21xfrm: Fix a typoJakub Wilk1-1/+1
Signed-off-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds4-30/+40
Pull networking updates from David Miller: 1) Add TX fast path in mac80211, from Johannes Berg. 2) Add TSO/GRO support to ibmveth, from Thomas Falcon 3) Move away from cached routes in ipv6, just like ipv4, from Martin KaFai Lau. 4) Lots of new rhashtable tests, from Thomas Graf. 5) Run ingress qdisc lockless, from Alexei Starovoitov. 6) Allow servers to fetch TCP packet headers for SYN packets of new connections, for fingerprinting. From Eric Dumazet. 7) Add mode parameter to pktgen, for testing receive. From Alexei Starovoitov. 8) Cache access optimizations via simplifications of build_skb(), from Alexander Duyck. 9) Move page frag allocator under mm/, also from Alexander. 10) Add xmit_more support to hv_netvsc, from KY Srinivasan. 11) Add a counter guard in case we try to perform endless reclassify loops in the packet scheduler. 12) Extern flow dissector to be programmable and use it in new "Flower" classifier. From Jiri Pirko. 13) AF_PACKET fanout rollover fixes, performance improvements, and new statistics. From Willem de Bruijn. 14) Add netdev driver for GENEVE tunnels, from John W Linville. 15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso. 16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet. 17) Add an ECN retry fallback for the initial TCP handshake, from Daniel Borkmann. 18) Add tail call support to BPF, from Alexei Starovoitov. 19) Add several pktgen helper scripts, from Jesper Dangaard Brouer. 20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa. 21) Favor even port numbers for allocation to connect() requests, and odd port numbers for bind(0), in an effort to help avoid ip_local_port_range exhaustion. From Eric Dumazet. 22) Add Cavium ThunderX driver, from Sunil Goutham. 23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata, from Alexei Starovoitov. 24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai. 25) Double TCP Small Queues default to 256K to accomodate situations like the XEN driver and wireless aggregation. From Wei Liu. 26) Add more entropy inputs to flow dissector, from Tom Herbert. 27) Add CDG congestion control algorithm to TCP, from Kenneth Klette Jonassen. 28) Convert ipset over to RCU locking, from Jozsef Kadlecsik. 29) Track and act upon link status of ipv4 route nexthops, from Andy Gospodarek. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits) bridge: vlan: flush the dynamically learned entries on port vlan delete bridge: multicast: add a comment to br_port_state_selection about blocking state net: inet_diag: export IPV6_V6ONLY sockopt stmmac: troubleshoot unexpected bits in des0 & des1 net: ipv4 sysctl option to ignore routes when nexthop link is down net: track link-status of ipv4 nexthops net: switchdev: ignore unsupported bridge flags net: Cavium: Fix MAC address setting in shutdown state drivers: net: xgene: fix for ACPI support without ACPI ip: report the original address of ICMP messages net/mlx5e: Prefetch skb data on RX net/mlx5e: Pop cq outside mlx5e_get_cqe net/mlx5e: Remove mlx5e_cq.sqrq back-pointer net/mlx5e: Remove extra spaces net/mlx5e: Avoid TX CQE generation if more xmit packets expected net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq() net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device ...
2015-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2-9/+59
Pull crypto update from Herbert Xu: "Here is the crypto update for 4.2: API: - Convert RNG interface to new style. - New AEAD interface with one SG list for AD and plain/cipher text. All external AEAD users have been converted. - New asymmetric key interface (akcipher). Algorithms: - Chacha20, Poly1305 and RFC7539 support. - New RSA implementation. - Jitter RNG. - DRBG is now seeded with both /dev/random and Jitter RNG. If kernel pool isn't ready then DRBG will be reseeded when it is. - DRBG is now the default crypto API RNG, replacing krng. - 842 compression (previously part of powerpc nx driver). Drivers: - Accelerated SHA-512 for arm64. - New Marvell CESA driver that supports DMA and more algorithms. - Updated powerpc nx 842 support. - Added support for SEC1 hardware to talitos" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (292 commits) crypto: marvell/cesa - remove COMPILE_TEST dependency crypto: algif_aead - Temporarily disable all AEAD algorithms crypto: af_alg - Forbid the use internal algorithms crypto: echainiv - Only hold RNG during initialisation crypto: seqiv - Add compatibility support without RNG crypto: eseqiv - Offer normal cipher functionality without RNG crypto: chainiv - Offer normal cipher functionality without RNG crypto: user - Add CRYPTO_MSG_DELRNG crypto: user - Move cryptouser.h to uapi crypto: rng - Do not free default RNG when it becomes unused crypto: skcipher - Allow givencrypt to be NULL crypto: sahara - propagate the error on clk_disable_unprepare() failure crypto: rsa - fix invalid select for AKCIPHER crypto: picoxcell - Update to the current clk API crypto: nx - Check for bogus firmware properties crypto: marvell/cesa - add DT bindings documentation crypto: marvell/cesa - add support for Kirkwood and Dove SoCs crypto: marvell/cesa - add support for Orion SoCs crypto: marvell/cesa - add allhwsupport module parameter crypto: marvell/cesa - add support for all armada SoCs ...
2015-06-04xfrm: Define ChaCha20-Poly1305 AEAD XFRM algo for IPsec usersMartin Willi1-0/+12
Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-2/+19
Conflicts: drivers/net/phy/amd-xgbe-phy.c drivers/net/wireless/iwlwifi/Kconfig include/net/mac80211.h iwlwifi/Kconfig and mac80211.h were both trivial overlapping changes. The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and the bug fix that happened on the 'net' side is already integrated into the rest of the amd-xgbe driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-29Merge branch 'master' of ↵David S. Miller3-30/+28
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2015-05-28 1) Remove xfrm_queue_purge as this is the same as skb_queue_purge. 2) Optimize policy and state walk. 3) Use a sane return code if afinfo registration fails. 4) Only check fori a acquire state if the state is not valid. 5) Remove a unnecessary NULL check before xfrm_pol_hold as it checks the input for NULL. 6) Return directly if the xfrm hold queue is empty, avoid to take a lock as it is nothing to do in this case. 7) Optimize the inexact policy search and allow for matching of policies with priority ~0U. All from Li RongQing. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-28xfrm: Override skb->mark with tunnel->parm.i_key in xfrm_inputAlexander Duyck1-1/+16
This change makes it so that if a tunnel is defined we just use the mark from the tunnel instead of the mark from the skb header. By doing this we can avoid the need to set skb->mark inside of the tunnel receive functions. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-28ipsec: Add IV generator information to xfrm_stateHerbert Xu1-9/+31
This patch adds IV generator information to xfrm_state. This is currently obtained from our own list of algorithm descriptions. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28xfrm: Add IV generator information to xfrm_algo_descHerbert Xu1-0/+16
This patch adds IV generator information for each AEAD and block cipher to xfrm_algo_desc. This will be used to access the new AEAD interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-21xfrm: Always zero high-order sequence number bitsHerbert Xu1-0/+2
As we're now always including the high bits of the sequence number in the IV generation process we need to ensure that they don't contain crap. This patch ensures that the high sequence bits are always zeroed so that we don't leak random data into the IV. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-18xfrm: optimise to search the inexact policy listLi RongQing1-3/+8
The policies are organized into list by priority ascent of policy, so it is unnecessary to continue to loop the policy if the priority of current looped police is larger than or equal priority which is from the policy_bydst list. This allows to match policy with ~0U priority in inexact list too. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-13net: make skb_dst_pop routine staticYing Xue1-0/+12
As xfrm_output_one() is the only caller of skb_dst_pop(), we should make skb_dst_pop() localized. Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05xfrm: move the checking for old xfrm_policy hold_queue to beginningLi RongQing1-3/+3
if hold_queue of old xfrm_policy is NULL, return directly, then not need to run other codes, especially take the spin lock Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-05-05xfrm: remove the unnecessary checking before call xfrm_pol_holdLi RongQing1-4/+3
xfrm_pol_hold will check its input with NULL Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-29xfrm: fix a race in xfrm_state_lookup_byspiLi RongQing1-1/+1
The returned xfrm_state should be hold before unlock xfrm_state_lock, otherwise the returned xfrm_state maybe be released. Fixes: c454997e6[{pktgen, xfrm} Introduce xfrm_state_lookup_byspi..] Cc: Fan Du <fan.du@intel.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Fan Du <fan.du@intel.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-24xfrm: slightly optimise xfrm_inputLi RongQing1-5/+5
Check x->km.state with XFRM_STATE_ACQ only when state is not XFRM_STAT_VALID, not everytime Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-23xfrm: fix the return code when xfrm_*_register_afinfo failedLi RongQing3-3/+3
If xfrm_*_register_afinfo failed since xfrm_*_afinfo[afinfo->family] had the value, return the -EEXIST, not -ENOBUFS Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-23xfrm: optimise the use of walk list header in xfrm_policy/state_walkLi RongQing2-2/+4
The walk from input is the list header, and marked as dead, and will be skipped in loop. list_first_entry() can be used to return the true usable value from walk if walk is not empty Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-23xfrm: remove the xfrm_queue_purge definitionLi RongQing1-10/+2
The task of xfrm_queue_purge is same as skb_queue_purge, so remove it Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+5
The dwmac-socfpga.c conflict was a case of a bug fix overlapping changes in net-next to handle an error pointer differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09Merge branch 'master' of ↵David S. Miller1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2015-04-09 1) Prohibit the use/abuse of the xfrm netlink interface on 32/64 bit compatibility tasks. We need a full compat layer before we can allow this. From Fan Du. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07netfilter: Pass socket pointer down through okfn().David Miller1-8/+8
On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07xfrm: fix xfrm_input/xfrm_tunnel_check oopsAlexey Dobriyan1-5/+5
https://bugzilla.kernel.org/show_bug.cgi?id=95211 Commit 70be6c91c86596ad2b60c73587880b47df170a41 ("xfrm: Add xfrm_tunnel_skb_cb to the skb common buffer") added check which dereferences ->outer_mode too early but larval SAs don't have this pointer set (yet). So check for tunnel stuff later. Mike Noordermeer reported this bug and patiently applied all the debugging. Technically this is remote-oops-in-interrupt-context type of thing. BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 IP: [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0 ... [<ffffffff81500fc6>] ? xfrm4_esp_rcv+0x36/0x70 [<ffffffff814acc9a>] ? ip_local_deliver_finish+0x9a/0x200 [<ffffffff81471b83>] ? __netif_receive_skb_core+0x6f3/0x8f0 ... RIP [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-03-31xfrm: simplify xfrm_address_t useJiri Benc1-4/+4
In many places, the a6 field is typecasted to struct in6_addr. As the fields are in union anyway, just add in6_addr type to the union and get rid of the typecasting. Modifying the uapi header is okay, the union has still the same size. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16Merge branch 'master' of ↵David S. Miller1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2015-03-16 1) Fix the network header offset in _decode_session6 when multiple IPv6 extension headers are present. From Hajime Tazaki. 2) Fix an interfamily tunnel crash. We set outer mode protocol too early and may dispatch to the wrong address family. Move the setting of the outer mode protocol behind the last accessing of the inner mode to fix the crash. 3) Most callers of xfrm_lookup() expect that dst_orig is released on error. But xfrm_lookup_route() may need dst_orig to handle certain error cases. So introduce a flag that tells what should be done in case of error. From Huaibin Wang. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03xfrm: Do not parse 32bits compiled xfrm netlink msg on 64bits hostFan Du1-0/+5
structure like xfrm_usersa_info or xfrm_userpolicy_info has different sizeof when compiled as 32bits and 64bits due to not appending pack attribute in their definition. This will result in broken SA and SP information when user trying to configure them through netlink interface. Inform user land about this situation instead of keeping silent, the upper test scripts would behave accordingly. Signed-off-by: Fan Du <fan.du@intel.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-02-12xfrm: release dst_orig in case of error in xfrm_lookup()huaibin Wang1-6/+6
dst_orig should be released on error. Function like __xfrm_route_forward() expects that behavior. Since a recent commit, xfrm_lookup() may also be called by xfrm_lookup_route(), which expects the opposite. Let's introduce a new flag (XFRM_LOOKUP_KEEP_DST_REF) to tell what should be done in case of error. Fixes: f92ee61982d("xfrm: Generate blackhole routes only from route lookup functions") Signed-off-by: huaibin Wang <huaibin.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg1-9/+18
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12net: xfrm: xfrm_algo: Remove unused functionRickard Strandqvist1-5/+0
Remove the function aead_entries() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09Merge branch 'master' of ↵David S. Miller2-27/+37
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2014-12-03 1) Fix a set but not used warning. From Fabian Frederick. 2) Currently we make sequence number values available to userspace only if we use ESN. Make the sequence number values also available for non ESN states. From Zhi Ding. 3) Remove socket policy hashing. We don't need it because socket policies are always looked up via a linked list. From Herbert Xu. 4) After removing socket policy hashing, we can use __xfrm_policy_link in xfrm_policy_insert. From Herbert Xu. 5) Add a lookup method for vti6 tunnels with wildcard endpoints. I forgot this when I initially implemented vti6. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13xfrm: Use __xfrm_policy_link in xfrm_policy_insertHerbert Xu1-3/+2
For a long time we couldn't actually use __xfrm_policy_link in xfrm_policy_insert because the latter wanted to do hashing at a specific position. Now that __xfrm_policy_link no longer does hashing it can now be safely used in xfrm_policy_insert to kill some duplicate code, finally reuniting general policies with socket policies. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-11-13xfrm: Do not hash socket policiesHerbert Xu1-18/+26
Back in 2003 when I added policy expiration, I half-heartedly did a clean-up and renamed xfrm_sk_policy_link/xfrm_sk_policy_unlink to __xfrm_policy_link/__xfrm_policy_unlink, because the latter could be reused for all policies. I never actually got around to using __xfrm_policy_link for non-socket policies. Later on hashing was added to all xfrm policies, including socket policies. In fact, we don't need hashing on socket policies at all since they're always looked up via a linked list. This patch restores xfrm_sk_policy_link/xfrm_sk_policy_unlink as wrappers around __xfrm_policy_link/__xfrm_policy_unlink so that it's obvious we're dealing with socket policies. This patch also removes hashing from __xfrm_policy_link as for now it's only used by socket policies which do not need to be hashed. Ironically this will in fact allow us to use this helper for non-socket policies which I shall do later. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-11-03xfrm: add XFRMA_REPLAY_VAL attribute to SA messagesdingzhi1-4/+8
After this commit, the attribute XFRMA_REPLAY_VAL is added when no ESN replay value is defined. Thus sequence number values are always notified to userspace. Signed-off-by: dingzhi <zhi.ding@6wind.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-10-30net: skb_fclone_busy() needs to detect orphaned skbEric Dumazet1-1/+1
Some drivers are unable to perform TX completions in a bound time. They instead call skb_orphan() Problem is skb_fclone_busy() has to detect this case, otherwise we block TCP retransmits and can freeze unlucky tcp sessions on mostly idle hosts. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 1f3279ae0c13 ("tcp: avoid retransmits of TCP packets hanging in host queues") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-27xfrm: fix set but not used warning in xfrm_policy_queue_process()Fabian Frederick1-2/+1
err was set but unused. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-10-20net: make skb_gso_segment error handling more robustFlorian Westphal1-0/+2
skb_gso_segment has three possible return values: 1. a pointer to the first segmented skb 2. an errno value (IS_ERR()) 3. NULL. This can happen when GSO is used for header verification. However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL and would oops when NULL is returned. Note that these call sites should never actually see such a NULL return value; all callers mask out the GSO bits in the feature argument. However, there have been issues with some protocol handlers erronously not respecting the specified feature mask in some cases. It is preferable to get 'have to turn off hw offloading, else slow' reports rather than 'kernel crashes'. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: cleanup and document skb fclone layoutEric Dumazet1-3/+1
Lets use a proper structure to clearly document and implement skb fast clones. Then, we might experiment more easily alternative layouts. This patch adds a new skb_fclone_busy() helper, used by tcp and xfrm, to stop leaking of implementation details. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28Merge branch 'master' of ↵David S. Miller4-31/+281
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2014-09-25 1) Remove useless hash_resize_mutex in xfrm_hash_resize(). This mutex is used only there, but xfrm_hash_resize() can't be called concurrently at all. From Ying Xue. 2) Extend policy hashing to prefixed policies based on prefix lenght thresholds. From Christophe Gouault. 3) Make the policy hash table thresholds configurable via netlink. From Christophe Gouault. 4) Remove the maximum authentication length for AH. This was needed to limit stack usage. We switched already to allocate space, so no need to keep the limit. From Herbert Xu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-8/+40
Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-18ipsec: Remove obsolete MAX_AH_AUTH_LENHerbert Xu1-2/+1
While tracking down the MAX_AH_AUTH_LEN crash in an old kernel I thought that this limit was rather arbitrary and we should just get rid of it. In fact it seems that we've already done all the work needed to remove it apart from actually removing it. This limit was there in order to limit stack usage. Since we've already switched over to allocating scratch space using kmalloc, there is no longer any need to limit the authentication length. This patch kills all references to it, including the BUG_ONs that led me here. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-16xfrm: Generate queueing routes only from route lookup functionsSteffen Klassert1-8/+24
Currently we genarate a queueing route if we have matching policies but can not resolve the states and the sysctl xfrm_larval_drop is disabled. Here we assume that dst_output() is called to kill the queued packets. Unfortunately this assumption is not true in all cases, so it is possible that these packets leave the system unwanted. We fix this by generating queueing routes only from the route lookup functions, here we can guarantee a call to dst_output() afterwards. Fixes: a0073fe18e71 ("xfrm: Add a state resolution packet queue") Reported-by: Konstantinos Kolelis <k.kolelis@sirrix.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-16xfrm: Generate blackhole routes only from route lookup functionsSteffen Klassert1-1/+17
Currently we genarate a blackhole route route whenever we have matching policies but can not resolve the states. Here we assume that dst_output() is called to kill the balckholed packets. Unfortunately this assumption is not true in all cases, so it is possible that these packets leave the system unwanted. We fix this by generating blackhole routes only from the route lookup functions, here we can guarantee a call to dst_output() afterwards. Fixes: 2774c131b1d ("xfrm: Handle blackhole route creation via afinfo.") Reported-by: Konstantinos Kolelis <k.kolelis@sirrix.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-10net: use kfree_skb_list() helper in more placesFlorian Westphal1-5/+1
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02xfrm: configure policy hash table thresholds by netlinkChristophe Gouault2-3/+164
Enable to specify local and remote prefix length thresholds for the policy hash table via a netlink XFRM_MSG_NEWSPDINFO message. prefix length thresholds are specified by XFRMA_SPD_IPV4_HTHRESH and XFRMA_SPD_IPV6_HTHRESH optional attributes (struct xfrmu_spdhthresh). example: struct xfrmu_spdhthresh thresh4 = { .lbits = 0; .rbits = 24; }; struct xfrmu_spdhthresh thresh6 = { .lbits = 0; .rbits = 56; }; struct nlmsghdr *hdr; struct nl_msg *msg; msg = nlmsg_alloc(); hdr = nlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, XFRMA_SPD_IPV4_HTHRESH, sizeof(__u32), NLM_F_REQUEST); nla_put(msg, XFRMA_SPD_IPV4_HTHRESH, sizeof(thresh4), &thresh4); nla_put(msg, XFRMA_SPD_IPV6_HTHRESH, sizeof(thresh6), &thresh6); nla_send_auto(sk, msg); The numbers are the policy selector minimum prefix lengths to put a policy in the hash table. - lbits is the local threshold (source address for out policies, destination address for in and fwd policies). - rbits is the remote threshold (destination address for out policies, source address for in and fwd policies). The default values are: XFRMA_SPD_IPV4_HTHRESH: 32 32 XFRMA_SPD_IPV6_HTHRESH: 128 128 Dynamic re-building of the SPD is performed when the thresholds values are changed. The current thresholds can be read via a XFRM_MSG_GETSPDINFO request: the kernel replies to XFRM_MSG_GETSPDINFO requests by an XFRM_MSG_NEWSPDINFO message, with both attributes XFRMA_SPD_IPV4_HTHRESH and XFRMA_SPD_IPV6_HTHRESH. Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-02xfrm: hash prefixed policies based on preflen thresholdsChristophe Gouault2-16/+113
The idea is an extension of the current policy hashing. Today only non-prefixed policies are stored in a hash table. This patch relaxes the constraints, and hashes policies whose prefix lengths are greater or equal to a configurable threshold. Each hash table (one per direction) maintains its own set of IPv4 and IPv6 thresholds (dbits4, sbits4, dbits6, sbits6), by default (32, 32, 128, 128). Example, if the output hash table is configured with values (16, 24, 56, 64): ip xfrm policy add dir out src dst ... => hashed ip xfrm policy add dir out src dst ... => hashed ip xfrm policy add dir out src dst ... => unhashed ip xfrm policy add dir out \ src 3ffe:304:124:2200::/60 dst 3ffe:304:124:2401::/64 ... => hashed ip xfrm policy add dir out \ src 3ffe:304:124:2200::/56 dst 3ffe:304:124:2401::2/128 ... => hashed ip xfrm policy add dir out \ src 3ffe:304:124:2200::/56 dst 3ffe:304:124:2400::/56 ... => unhashed The high order bits of the addresses (up to the threshold) are used to compute the hash key. Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-08-29xfrm: remove useless hash_resize_mutex locksYing Xue1-10/+3
In xfrm_state.c, hash_resize_mutex is defined as a local variable and only used in xfrm_hash_resize() which is declared as a work handler of xfrm.state_hash_work. But when the xfrm.state_hash_work work is put in the global workqueue(system_wq) with schedule_work(), the work will be really inserted in the global workqueue if it was not already queued, otherwise, it is still left in the same position on the the global workqueue. This means the xfrm_hash_resize() work handler is only executed once at any time no matter how many times its work is scheduled, that is, xfrm_hash_resize() is not called concurrently at all, so hash_resize_mutex is redundant for us. Cc: Christophe Gouault <christophe.gouault@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Privacy Policy