aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorBenjamin Herrenschmidt <benh@kernel.crashing.org>2009-02-05 12:06:52 +1100
committerLinus Torvalds <torvalds@linux-foundation.org>2009-02-08 10:48:57 -0800
commit1fb25cb8b83e85f5bf1a4adb3c9a254c4ce92405 (patch)
treee591b556e43577f34eb90e9a4d8342ff97bef4ef
parentb746bb77627cba62765ff2afeec9cc9a8cbb926c (diff)
radeonfb: Fix resume from D3Cold on some platforms
For historical reason, this driver used its own saving/restoring of the PCI config space, and used the state of it on resume as an indication as to whether it needed to re-POST the chip or not. This methods breaks with the later core changes since the core will have restored things for us. This patch fixes it by removing that custom code, using standard core methods to save/restore state, and testing for the need to re-POST by comparing the content of a few key PLL registers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-rw-r--r--drivers/video/aty/radeon_pm.c85
-rw-r--r--drivers/video/aty/radeonfb.h2
2 files changed, 20 insertions, 67 deletions
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/aty/radeon_pm.c
index c4ac2a032fcb..ca5f0dc28546 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/aty/radeon_pm.c
@@ -2509,9 +2509,7 @@ static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
{
- u16 pwr_cmd;
u32 tmp;
- int i;
if (!rinfo->pm_reg)
return;
@@ -2557,32 +2555,14 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
}
}
- for (i = 0; i < 64; ++i)
- pci_read_config_dword(rinfo->pdev, i * 4,
- &rinfo->cfg_save[i]);
-
/* Switch PCI power management to D2. */
pci_disable_device(rinfo->pdev);
- for (;;) {
- pci_read_config_word(
- rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
- &pwr_cmd);
- if (pwr_cmd & 2)
- break;
- pci_write_config_word(
- rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
- (pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2);
- mdelay(500);
- }
+ pci_save_state(rinfo->pdev);
+ pci_set_power_state(rinfo->pdev, PCI_D2);
} else {
printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
pci_name(rinfo->pdev));
- /* Switch back PCI powermanagment to D0 */
- mdelay(200);
- pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0);
- mdelay(500);
-
if (rinfo->family <= CHIP_FAMILY_RV250) {
/* Reset the SDRAM controller */
radeon_pm_full_reset_sdram(rinfo);
@@ -2598,37 +2578,10 @@ static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
}
}
-static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo)
-{
- int i;
- static u32 radeon_cfg_after_resume[64];
-
- for (i = 0; i < 64; ++i)
- pci_read_config_dword(rinfo->pdev, i * 4,
- &radeon_cfg_after_resume[i]);
-
- if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4]
- == rinfo->cfg_save[PCI_BASE_ADDRESS_0/4])
- return 0; /* assume everything is ok */
-
- for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) {
- if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i])
- pci_write_config_dword(rinfo->pdev, i * 4,
- rinfo->cfg_save[i]);
- }
- pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE,
- rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]);
- pci_write_config_word(rinfo->pdev, PCI_COMMAND,
- rinfo->cfg_save[PCI_COMMAND/4]);
- return 1;
-}
-
-
int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct fb_info *info = pci_get_drvdata(pdev);
struct radeonfb_info *rinfo = info->par;
- int i;
if (mesg.event == pdev->dev.power.power_state.event)
return 0;
@@ -2674,6 +2627,11 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
pmac_suspend_agp_for_card(pdev);
#endif /* CONFIG_PPC_PMAC */
+ /* It's unclear whether or when the generic code will do that, so let's
+ * do it ourselves. We save state before we do any power management
+ */
+ pci_save_state(pdev);
+
/* If we support wakeup from poweroff, we save all regs we can including cfg
* space
*/
@@ -2698,9 +2656,6 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
mdelay(20);
OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON));
}
- // FIXME: Use PCI layer
- for (i = 0; i < 64; ++i)
- pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]);
pci_disable_device(pdev);
}
/* If we support D2, we go to it (should be fixed later with a flag forcing
@@ -2717,6 +2672,13 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
return 0;
}
+static int radeon_check_power_loss(struct radeonfb_info *rinfo)
+{
+ return rinfo->save_regs[4] != INPLL(CLK_PIN_CNTL) ||
+ rinfo->save_regs[2] != INPLL(MCLK_CNTL) ||
+ rinfo->save_regs[3] != INPLL(SCLK_CNTL);
+}
+
int radeonfb_pci_resume(struct pci_dev *pdev)
{
struct fb_info *info = pci_get_drvdata(pdev);
@@ -2735,20 +2697,13 @@ int radeonfb_pci_resume(struct pci_dev *pdev)
printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
pci_name(pdev), pdev->dev.power.power_state.event);
-
- if (pci_enable_device(pdev)) {
- rc = -ENODEV;
- printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n",
- pci_name(pdev));
- goto bail;
- }
- pci_set_master(pdev);
-
+ /* PCI state will have been restored by the core, so
+ * we should be in D0 now with our config space fully
+ * restored
+ */
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
- /* Wakeup chip. Check from config space if we were powered off
- * (todo: additionally, check CLK_PIN_CNTL too)
- */
- if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) {
+ /* Wakeup chip */
+ if ((rinfo->pm_mode & radeon_pm_off) && radeon_check_power_loss(rinfo)) {
if (rinfo->reinit_func != NULL)
rinfo->reinit_func(rinfo);
else {
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/aty/radeonfb.h
index 3ea1b00fdd22..7351e66c7f54 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/aty/radeonfb.h
@@ -361,8 +361,6 @@ struct radeonfb_info {
#ifdef CONFIG_FB_RADEON_I2C
struct radeon_i2c_chan i2c[4];
#endif
-
- u32 cfg_save[64];
};

Privacy Policy