aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-01-25 19:17:34 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-25 19:17:34 (GMT)
commit4ba9920e5e9c0e16b5ed24292d45322907bb9035 (patch)
tree7d023baea59ed0886ded1f0b6d1c6385690b88f7
parent82c477669a4665eb4e52030792051e0559ee2a36 (diff)
parent8b662fe70c68282f78482dc272df0c4f355e49f5 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
-rw-r--r--Documentation/ABI/testing/sysfs-class-net-mesh8
-rw-r--r--Documentation/cgroups/net_cls.txt5
-rw-r--r--Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt27
-rw-r--r--Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt25
-rw-r--r--Documentation/devicetree/bindings/net/davinci_emac.txt4
-rw-r--r--Documentation/devicetree/bindings/net/phy.txt1
-rw-r--r--Documentation/devicetree/bindings/net/stmmac.txt7
-rw-r--r--Documentation/networking/batman-adv.txt9
-rw-r--r--Documentation/networking/bonding.txt11
-rw-r--r--Documentation/networking/can.txt94
-rw-r--r--Documentation/networking/filter.txt608
-rw-r--r--Documentation/networking/i40evf.txt47
-rw-r--r--Documentation/networking/ip-sysctl.txt59
-rw-r--r--Documentation/networking/ipsec.txt38
-rw-r--r--Documentation/networking/packet_mmap.txt48
-rw-r--r--Documentation/networking/phy.txt3
-rw-r--r--Documentation/networking/pktgen.txt15
-rw-r--r--Documentation/networking/regulatory.txt4
-rw-r--r--Documentation/networking/stmmac.txt12
-rw-r--r--Documentation/networking/timestamping.txt9
-rw-r--r--Documentation/networking/timestamping/.gitignore1
-rw-r--r--Documentation/networking/timestamping/Makefile5
-rw-r--r--Documentation/networking/timestamping/hwtstamp_config.c134
-rw-r--r--Documentation/s390/qeth.txt50
-rw-r--r--Documentation/unaligned-memory-access.txt28
-rw-r--r--MAINTAINERS33
-rw-r--r--arch/alpha/include/asm/Kbuild1
-rw-r--r--arch/alpha/include/uapi/asm/socket.h2
-rw-r--r--arch/arc/include/asm/Kbuild1
-rw-r--r--arch/arm/include/asm/Kbuild1
-rw-r--r--arch/arm64/include/asm/Kbuild1
-rw-r--r--arch/avr32/include/asm/Kbuild1
-rw-r--r--arch/avr32/include/uapi/asm/socket.h2
-rw-r--r--arch/blackfin/include/asm/Kbuild1
-rw-r--r--arch/blackfin/mach-bf609/boards/ezkit.c2
-rw-r--r--arch/c6x/include/asm/Kbuild1
-rw-r--r--arch/cris/include/asm/Kbuild1
-rw-r--r--arch/cris/include/uapi/asm/socket.h2
-rw-r--r--arch/frv/include/asm/Kbuild1
-rw-r--r--arch/frv/include/uapi/asm/socket.h2
-rw-r--r--arch/hexagon/include/asm/Kbuild1
-rw-r--r--arch/ia64/include/asm/Kbuild3
-rw-r--r--arch/ia64/include/uapi/asm/socket.h2
-rw-r--r--arch/m32r/include/asm/Kbuild1
-rw-r--r--arch/m32r/include/uapi/asm/socket.h2
-rw-r--r--arch/m68k/include/asm/Kbuild1
-rw-r--r--arch/metag/include/asm/Kbuild1
-rw-r--r--arch/microblaze/include/asm/Kbuild1
-rw-r--r--arch/mips/bcm47xx/setup.c10
-rw-r--r--arch/mips/include/asm/Kbuild1
-rw-r--r--arch/mips/include/uapi/asm/socket.h2
-rw-r--r--arch/mn10300/include/asm/Kbuild1
-rw-r--r--arch/mn10300/include/uapi/asm/socket.h2
-rw-r--r--arch/openrisc/include/asm/Kbuild1
-rw-r--r--arch/parisc/include/asm/Kbuild1
-rw-r--r--arch/parisc/include/uapi/asm/socket.h2
-rw-r--r--arch/powerpc/include/asm/Kbuild3
-rw-r--r--arch/powerpc/include/uapi/asm/socket.h2
-rw-r--r--arch/s390/include/asm/Kbuild1
-rw-r--r--arch/s390/include/uapi/asm/socket.h2
-rw-r--r--arch/score/include/asm/Kbuild2
-rw-r--r--arch/sh/include/asm/Kbuild1
-rw-r--r--arch/sparc/include/asm/Kbuild1
-rw-r--r--arch/sparc/include/uapi/asm/socket.h2
-rw-r--r--arch/tile/include/asm/Kbuild1
-rw-r--r--arch/um/include/asm/Kbuild1
-rw-r--r--arch/unicore32/include/asm/Kbuild1
-rw-r--r--arch/x86/include/asm/hash.h7
-rw-r--r--arch/x86/lib/Makefile2
-rw-r--r--arch/x86/lib/hash.c88
-rw-r--r--arch/xtensa/include/asm/Kbuild1
-rw-r--r--arch/xtensa/include/uapi/asm/socket.h2
-rw-r--r--drivers/atm/he.c1
-rw-r--r--drivers/atm/nicstar.c4
-rw-r--r--drivers/atm/solos-pci.c2
-rw-r--r--drivers/bcma/bcma_private.h2
-rw-r--r--drivers/bcma/driver_chipcommon_sflash.c6
-rw-r--r--drivers/bcma/host_pci.c3
-rw-r--r--drivers/bcma/main.c14
-rw-r--r--drivers/bluetooth/ath3k.c4
-rw-r--r--drivers/bluetooth/btmrvl_drv.h25
-rw-r--r--drivers/bluetooth/btmrvl_main.c130
-rw-r--r--drivers/bluetooth/btmrvl_sdio.c9
-rw-r--r--drivers/bluetooth/btmrvl_sdio.h2
-rw-r--r--drivers/bluetooth/btsdio.c6
-rw-r--r--drivers/bluetooth/btusb.c53
-rw-r--r--drivers/bluetooth/hci_vhci.c29
-rw-r--r--drivers/infiniband/core/cma.c2
-rw-r--r--drivers/isdn/i4l/isdn_net.c4
-rw-r--r--drivers/isdn/mISDN/socket.c5
-rw-r--r--drivers/isdn/sc/event.c2
-rw-r--r--drivers/media/dvb-core/dvb_net.c10
-rw-r--r--drivers/net/Kconfig1
-rw-r--r--drivers/net/Space.c29
-rw-r--r--drivers/net/arcnet/com20020_cs.c1
-rw-r--r--drivers/net/bonding/Makefile2
-rw-r--r--drivers/net/bonding/bond_3ad.c900
-rw-r--r--drivers/net/bonding/bond_3ad.h2
-rw-r--r--drivers/net/bonding/bond_alb.c49
-rw-r--r--drivers/net/bonding/bond_alb.h3
-rw-r--r--drivers/net/bonding/bond_main.c569
-rw-r--r--drivers/net/bonding/bond_netlink.c464
-rw-r--r--drivers/net/bonding/bond_options.c1191
-rw-r--r--drivers/net/bonding/bond_options.h170
-rw-r--r--drivers/net/bonding/bond_procfs.c37
-rw-r--r--drivers/net/bonding/bond_sysfs.c896
-rw-r--r--drivers/net/bonding/bond_sysfs_slave.c144
-rw-r--r--drivers/net/bonding/bonding.h38
-rw-r--r--drivers/net/caif/caif_spi_slave.c1
-rw-r--r--drivers/net/can/Kconfig4
-rw-r--r--drivers/net/can/at91_can.c1
-rw-r--r--drivers/net/can/bfin_can.c1
-rw-r--r--drivers/net/can/c_can/c_can.c22
-rw-r--r--drivers/net/can/dev.c3
-rw-r--r--drivers/net/can/janz-ican3.c1
-rw-r--r--drivers/net/can/mcp251x.c121
-rw-r--r--drivers/net/can/mscan/mpc5xxx_can.c3
-rw-r--r--drivers/net/can/mscan/mscan.c3
-rw-r--r--drivers/net/can/mscan/mscan.h3
-rw-r--r--drivers/net/can/pch_can.c4
-rw-r--r--drivers/net/can/sja1000/ems_pci.c3
-rw-r--r--drivers/net/can/sja1000/kvaser_pci.c3
-rw-r--r--drivers/net/can/sja1000/plx_pci.c26
-rw-r--r--drivers/net/can/sja1000/sja1000_isa.c3
-rw-r--r--drivers/net/can/sja1000/sja1000_of_platform.c3
-rw-r--r--drivers/net/can/sja1000/sja1000_platform.c3
-rw-r--r--drivers/net/can/slcan.c4
-rw-r--r--drivers/net/can/softing/softing_cs.c3
-rw-r--r--drivers/net/can/softing/softing_fw.c3
-rw-r--r--drivers/net/can/softing/softing_main.c4
-rw-r--r--drivers/net/can/ti_hecc.c11
-rw-r--r--drivers/net/can/usb/ems_usb.c1
-rw-r--r--drivers/net/can/usb/esd_usb2.c1
-rw-r--r--drivers/net/can/usb/kvaser_usb.c1
-rw-r--r--drivers/net/can/usb/usb_8dev.c1
-rw-r--r--drivers/net/eql.c95
-rw-r--r--drivers/net/ethernet/3com/3c509.c3
-rw-r--r--drivers/net/ethernet/3com/3c574_cs.c1
-rw-r--r--drivers/net/ethernet/3com/3c589_cs.c1
-rw-r--r--drivers/net/ethernet/3com/3c59x.c6
-rw-r--r--drivers/net/ethernet/8390/8390.h7
-rw-r--r--drivers/net/ethernet/8390/apne.c62
-rw-r--r--drivers/net/ethernet/8390/ax88796.c23
-rw-r--r--drivers/net/ethernet/8390/axnet_cs.c120
-rw-r--r--drivers/net/ethernet/8390/etherh.c53
-rw-r--r--drivers/net/ethernet/8390/hydra.c11
-rw-r--r--drivers/net/ethernet/8390/lib8390.c77
-rw-r--r--drivers/net/ethernet/8390/mac8390.c19
-rw-r--r--drivers/net/ethernet/8390/mcf8390.c9
-rw-r--r--drivers/net/ethernet/8390/ne.c96
-rw-r--r--drivers/net/ethernet/8390/ne2k-pci.c54
-rw-r--r--drivers/net/ethernet/8390/pcnet_cs.c63
-rw-r--r--drivers/net/ethernet/8390/smc-ultra.c48
-rw-r--r--drivers/net/ethernet/8390/stnic.c28
-rw-r--r--drivers/net/ethernet/8390/wd.c42
-rw-r--r--drivers/net/ethernet/8390/zorro8390.c22
-rw-r--r--drivers/net/ethernet/adi/bfin_mac.c22
-rw-r--r--drivers/net/ethernet/aeroflex/greth.c3
-rw-r--r--drivers/net/ethernet/allwinner/sun4i-emac.c1
-rw-r--r--drivers/net/ethernet/alteon/acenic.c1
-rw-r--r--drivers/net/ethernet/amd/7990.c837
-rw-r--r--drivers/net/ethernet/amd/7990.h268
-rw-r--r--drivers/net/ethernet/amd/amd8111e.c5
-rw-r--r--drivers/net/ethernet/amd/amd8111e.h6
-rw-r--r--drivers/net/ethernet/amd/au1000_eth.c4
-rw-r--r--drivers/net/ethernet/amd/au1000_eth.h3
-rw-r--r--drivers/net/ethernet/amd/hplance.c96
-rw-r--r--drivers/net/ethernet/amd/mvme147.c36
-rw-r--r--drivers/net/ethernet/amd/nmclan_cs.c1
-rw-r--r--drivers/net/ethernet/amd/pcnet32.c2
-rw-r--r--drivers/net/ethernet/amd/sunlance.c1
-rw-r--r--drivers/net/ethernet/arc/emac.h2
-rw-r--r--drivers/net/ethernet/arc/emac_main.c20
-rw-r--r--drivers/net/ethernet/atheros/alx/alx.h3
-rw-r--r--drivers/net/ethernet/atheros/alx/ethtool.c101
-rw-r--r--drivers/net/ethernet/atheros/alx/hw.c58
-rw-r--r--drivers/net/ethernet/atheros/alx/hw.h71
-rw-r--r--drivers/net/ethernet/atheros/alx/main.c50
-rw-r--r--drivers/net/ethernet/atheros/alx/reg.h52
-rw-r--r--drivers/net/ethernet/atheros/atl1c/atl1c.h1
-rw-r--r--drivers/net/ethernet/atheros/atl1c/atl1c_main.c31
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e.h1
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_main.c30
-rw-r--r--drivers/net/ethernet/atheros/atlx/atl1.c46
-rw-r--r--drivers/net/ethernet/atheros/atlx/atl1.h1
-rw-r--r--drivers/net/ethernet/broadcom/Kconfig1
-rw-r--r--drivers/net/ethernet/broadcom/b44.c250
-rw-r--r--drivers/net/ethernet/broadcom/b44.h15
-rw-r--r--drivers/net/ethernet/broadcom/bgmac.c364
-rw-r--r--drivers/net/ethernet/broadcom/bgmac.h94
-rw-r--r--drivers/net/ethernet/broadcom/bnx2.c60
-rw-r--r--drivers/net/ethernet/broadcom/bnx2.h10
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x.h8
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c101
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h124
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c6
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c66
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h10
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c209
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h1
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c277
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h17
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c181
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h15
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c39
-rw-r--r--drivers/net/ethernet/broadcom/cnic.c1
-rw-r--r--drivers/net/ethernet/broadcom/cnic.h2
-rw-r--r--drivers/net/ethernet/broadcom/cnic_if.h4
-rw-r--r--drivers/net/ethernet/broadcom/sb1250-mac.c4
-rw-r--r--drivers/net/ethernet/broadcom/tg3.c230
-rw-r--r--drivers/net/ethernet/broadcom/tg3.h11
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_ioc.c625
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_ioc.h8
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c40
-rw-r--r--drivers/net/ethernet/brocade/bna/bfi.h33
-rw-r--r--drivers/net/ethernet/brocade/bna/bfi_enet.h3
-rw-r--r--drivers/net/ethernet/brocade/bna/bna.h24
-rw-r--r--drivers/net/ethernet/brocade/bna/bna_enet.c58
-rw-r--r--drivers/net/ethernet/brocade/bna/bna_hw_defs.h4
-rw-r--r--drivers/net/ethernet/brocade/bna/bna_tx_rx.c251
-rw-r--r--drivers/net/ethernet/brocade/bna/bna_types.h57
-rw-r--r--drivers/net/ethernet/brocade/bna/bnad.c559
-rw-r--r--drivers/net/ethernet/brocade/bna/bnad.h26
-rw-r--r--drivers/net/ethernet/brocade/bna/bnad_ethtool.c1
-rw-r--r--drivers/net/ethernet/brocade/bna/cna.h4
-rw-r--r--drivers/net/ethernet/cadence/macb.c126
-rw-r--r--drivers/net/ethernet/cadence/macb.h1
-rw-r--r--drivers/net/ethernet/calxeda/xgmac.c1
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/common.h4
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/cphy.h3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/cpl5_cmd.h3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/cxgb2.c4
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/elmer0.h3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/espi.c3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/espi.h3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/gmac.h3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/mv88x201x.c3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/pm3393.c3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/regs.h3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/sge.c4
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/sge.h3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/subr.c3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/suni1x10gexp_regs.h3
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/common.h1
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c2
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/l2t.c2
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4.h21
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c35
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/sge.c6
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_hw.c139
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h1
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c4
-rw-r--r--drivers/net/ethernet/cirrus/ep93xx_eth.c1
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_main.c11
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_pp.c2
-rw-r--r--drivers/net/ethernet/davicom/dm9000.c24
-rw-r--r--drivers/net/ethernet/dec/tulip/eeprom.c1
-rw-r--r--drivers/net/ethernet/dec/tulip/media.c3
-rw-r--r--drivers/net/ethernet/dec/tulip/uli526x.c6
-rw-r--r--drivers/net/ethernet/dec/tulip/xircom_cb.c1
-rw-r--r--drivers/net/ethernet/dlink/dl2k.h1
-rw-r--r--drivers/net/ethernet/dnet.c1
-rw-r--r--drivers/net/ethernet/emulex/benet/be.h7
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.c178
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.h33
-rw-r--r--drivers/net/ethernet/emulex/benet/be_ethtool.c73
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c164
-rw-r--r--drivers/net/ethernet/faraday/ftgmac100.c7
-rw-r--r--drivers/net/ethernet/freescale/fec.h3
-rw-r--r--drivers/net/ethernet/freescale/fec_main.c9
-rw-r--r--drivers/net/ethernet/freescale/fec_ptp.c17
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c1
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mac-fcc.c1
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mac-fec.c1
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mac-scc.c1
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c1
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mii-fec.c1
-rw-r--r--drivers/net/ethernet/freescale/fsl_pq_mdio.c1
-rw-r--r--drivers/net/ethernet/freescale/gianfar.c23
-rw-r--r--drivers/net/ethernet/freescale/gianfar.h1
-rw-r--r--drivers/net/ethernet/freescale/gianfar_ethtool.c99
-rw-r--r--drivers/net/ethernet/freescale/gianfar_ptp.c3
-rw-r--r--drivers/net/ethernet/freescale/gianfar_sysfs.c1
-rw-r--r--drivers/net/ethernet/freescale/ucc_geth.c5
-rw-r--r--drivers/net/ethernet/freescale/ucc_geth_ethtool.c1
-rw-r--r--drivers/net/ethernet/fujitsu/fmvj18x_cs.c1
-rw-r--r--drivers/net/ethernet/i825xx/lasi_82596.c1
-rw-r--r--drivers/net/ethernet/i825xx/lib82596.c1
-rw-r--r--drivers/net/ethernet/i825xx/sni_82596.c1
-rw-r--r--drivers/net/ethernet/ibm/emac/core.h1
-rw-r--r--drivers/net/ethernet/ibm/ibmveth.c3
-rw-r--r--drivers/net/ethernet/ibm/ibmveth.h3
-rw-r--r--drivers/net/ethernet/icplus/ipg.h1
-rw-r--r--drivers/net/ethernet/intel/Kconfig49
-rw-r--r--drivers/net/ethernet/intel/Makefile1
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000.h1
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c14
-rw-r--r--drivers/net/ethernet/intel/i40e/Makefile10
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e.h127
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_adminq.c237
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_adminq.h21
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h136
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_alloc.h7
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_common.c666
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_dcb.c469
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_dcb.h107
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_dcb_nl.c316
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_debugfs.c400
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_diag.c23
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_diag.h15
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_ethtool.c432
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_hmc.c17
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_hmc.h10
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_lan_hmc.c10
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_lan_hmc.h11
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c1753
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_nvm.c77
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_osdep.h7
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_prototype.h53
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_ptp.c662
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_register.h170
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_status.h7
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_txrx.c195
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_txrx.h64
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_type.h152
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_virtchnl.h11
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c876
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.h11
-rw-r--r--drivers/net/ethernet/intel/i40evf/Makefile33
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_adminq.c927
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_adminq.h106
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_adminq_cmd.h2153
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_alloc.h55
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_common.c254
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_hmc.h238
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_lan_hmc.h165
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_osdep.h72
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_prototype.h84
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_register.h4667
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_status.h97
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_txrx.c1575
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_txrx.h296
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_type.h1152
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40e_virtchnl.h364
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40evf.h321
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40evf_ethtool.c390
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40evf_main.c2353
-rw-r--r--drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c772
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_82575.c89
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_defines.h16
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_hw.h3
-rw-r--r--drivers/net/ethernet/intel/igb/igb.h28
-rw-r--r--drivers/net/ethernet/intel/igb/igb_ethtool.c10
-rw-r--r--drivers/net/ethernet/intel/igb/igb_hwmon.c108
-rw-r--r--drivers/net/ethernet/intel/igb/igb_main.c303
-rw-r--r--drivers/net/ethernet/intel/igbvf/netdev.c2
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb.h1
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe.h21
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.h65
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c120
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c82
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c3
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c2
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c30
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h5
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_sysfs.c84
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_type.h15
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/defines.h18
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/ethtool.c76
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/ixgbevf.h96
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c1276
-rw-r--r--drivers/net/ethernet/korina.c1
-rw-r--r--drivers/net/ethernet/lantiq_etop.c3
-rw-r--r--drivers/net/ethernet/marvell/Kconfig1
-rw-r--r--drivers/net/ethernet/marvell/mv643xx_eth.c28
-rw-r--r--drivers/net/ethernet/marvell/mvmdio.c1
-rw-r--r--drivers/net/ethernet/marvell/mvneta.c387
-rw-r--r--drivers/net/ethernet/marvell/pxa168_eth.c24
-rw-r--r--drivers/net/ethernet/marvell/sky2.c6
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/Kconfig1
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/alloc.c12
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/cq.c5
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_clock.c198
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_cq.c12
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_ethtool.c3
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_main.c6
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_netdev.c142
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_resources.c6
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_rx.c30
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_tx.c62
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/eq.c5
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/fw.c93
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/fw.h2
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/main.c109
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mcg.c45
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mlx4.h10
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mlx4_en.h19
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mr.c3
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/pd.c7
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/port.c41
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/qp.c3
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/resource_tracker.c100
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/srq.c5
-rw-r--r--drivers/net/ethernet/mellanox/mlx5/core/cmd.c1
-rw-r--r--drivers/net/ethernet/micrel/ks8695net.c1
-rw-r--r--drivers/net/ethernet/micrel/ksz884x.c12
-rw-r--r--drivers/net/ethernet/moxa/moxart_ether.c1
-rw-r--r--drivers/net/ethernet/natsemi/jazzsonic.c1
-rw-r--r--drivers/net/ethernet/natsemi/macsonic.c1
-rw-r--r--drivers/net/ethernet/natsemi/ns83820.c5
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-config.c2
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-main.c35
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-main.h1
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-traffic.c37
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-traffic.h8
-rw-r--r--drivers/net/ethernet/netx-eth.c3
-rw-r--r--drivers/net/ethernet/nvidia/forcedeth.c6
-rw-r--r--drivers/net/ethernet/nxp/lpc_eth.c1
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h3
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c3
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h3
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c3
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c3
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c3
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c3
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h3
-rw-r--r--drivers/net/ethernet/packetengines/yellowfin.c17
-rw-r--r--drivers/net/ethernet/pasemi/pasemi_mac.c4
-rw-r--r--drivers/net/ethernet/pasemi/pasemi_mac.h3
-rw-r--r--drivers/net/ethernet/pasemi/pasemi_mac_ethtool.c3
-rw-r--r--drivers/net/ethernet/qlogic/netxen/Makefile4
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic.h4
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c4
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c4
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h4
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c6
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h4
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c4
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c4
-rw-r--r--drivers/net/ethernet/qlogic/qla3xxx.c1
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic.h197
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c425
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h45
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c28
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_vnic.c14
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c49
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c31
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.h14
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c144
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h1
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c127
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.h9
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c167
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c435
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov.h15
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c257
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c236
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c133
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge.h1
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_dbg.c4
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_ethtool.c1
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_main.c1
-rw-r--r--drivers/net/ethernet/rdc/r6040.c7
-rw-r--r--drivers/net/ethernet/realtek/r8169.c1
-rw-r--r--drivers/net/ethernet/renesas/Kconfig2
-rw-r--r--drivers/net/ethernet/renesas/sh_eth.c263
-rw-r--r--drivers/net/ethernet/renesas/sh_eth.h56
-rw-r--r--drivers/net/ethernet/s6gmac.c1
-rw-r--r--drivers/net/ethernet/seeq/sgiseeq.c3
-rw-r--r--drivers/net/ethernet/sfc/ef10.c549
-rw-r--r--drivers/net/ethernet/sfc/efx.c201
-rw-r--r--drivers/net/ethernet/sfc/efx.h16
-rw-r--r--drivers/net/ethernet/sfc/enum.h1
-rw-r--r--drivers/net/ethernet/sfc/ethtool.c16
-rw-r--r--drivers/net/ethernet/sfc/falcon.c38
-rw-r--r--drivers/net/ethernet/sfc/farch.c48
-rw-r--r--drivers/net/ethernet/sfc/filter.h17
-rw-r--r--drivers/net/ethernet/sfc/mcdi.c444
-rw-r--r--drivers/net/ethernet/sfc/mcdi.h21
-rw-r--r--drivers/net/ethernet/sfc/mcdi_mon.c76
-rw-r--r--drivers/net/ethernet/sfc/mcdi_pcol.h733
-rw-r--r--drivers/net/ethernet/sfc/mcdi_port.c89
-rw-r--r--drivers/net/ethernet/sfc/net_driver.h75
-rw-r--r--drivers/net/ethernet/sfc/nic.c12
-rw-r--r--drivers/net/ethernet/sfc/nic.h34
-rw-r--r--drivers/net/ethernet/sfc/ptp.c854
-rw-r--r--drivers/net/ethernet/sfc/rx.c24
-rw-r--r--drivers/net/ethernet/sfc/selftest.c2
-rw-r--r--drivers/net/ethernet/sfc/selftest.h1
-rw-r--r--drivers/net/ethernet/sfc/siena.c119
-rw-r--r--drivers/net/ethernet/sgi/ioc3-eth.c1
-rw-r--r--drivers/net/ethernet/sgi/meth.c1
-rw-r--r--drivers/net/ethernet/sis/sis900.c2
-rw-r--r--drivers/net/ethernet/smsc/smc911x.c4
-rw-r--r--drivers/net/ethernet/smsc/smc911x.h3
-rw-r--r--drivers/net/ethernet/smsc/smc91c92_cs.c1
-rw-r--r--drivers/net/ethernet/smsc/smc91x.c6
-rw-r--r--drivers/net/ethernet/smsc/smc91x.h3
-rw-r--r--drivers/net/ethernet/smsc/smsc911x.c3
-rw-r--r--drivers/net/ethernet/smsc/smsc911x.h3
-rw-r--r--drivers/net/ethernet/smsc/smsc9420.c5
-rw-r--r--drivers/net/ethernet/smsc/smsc9420.h3
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Kconfig12
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Makefile1
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/chain_mode.c3
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/common.h5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c140
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000.h7
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c7
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/ring_mode.c2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac.h11
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c471
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c3
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c10
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c135
-rw-r--r--drivers/net/ethernet/sun/cassini.c4
-rw-r--r--drivers/net/ethernet/sun/cassini.h4
-rw-r--r--drivers/net/ethernet/sun/niu.c10
-rw-r--r--drivers/net/ethernet/sun/sunbmac.c1
-rw-r--r--drivers/net/ethernet/sun/sungem.c1
-rw-r--r--drivers/net/ethernet/sun/sunvnet.c2
-rw-r--r--drivers/net/ethernet/tehuti/tehuti.c2
-rw-r--r--drivers/net/ethernet/ti/cpmac.c1
-rw-r--r--drivers/net/ethernet/ti/cpsw.c137
-rw-r--r--drivers/net/ethernet/ti/cpsw_ale.c18
-rw-r--r--drivers/net/ethernet/ti/cpsw_ale.h2
-rw-r--r--drivers/net/ethernet/ti/davinci_cpdma.c7
-rw-r--r--drivers/net/ethernet/ti/davinci_mdio.c2
-rw-r--r--drivers/net/ethernet/tile/Kconfig12
-rw-r--r--drivers/net/ethernet/tile/tilegx.c38
-rw-r--r--drivers/net/ethernet/toshiba/ps3_gelic_net.c18
-rw-r--r--drivers/net/ethernet/toshiba/tc35815.c16
-rw-r--r--drivers/net/ethernet/tundra/tsi108_eth.c1
-rw-r--r--drivers/net/ethernet/tundra/tsi108_eth.h4
-rw-r--r--drivers/net/ethernet/xilinx/ll_temac_main.c1
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet_main.c1
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_emaclite.c1
-rw-r--r--drivers/net/ethernet/xircom/xirc2ps_cs.c3
-rw-r--r--drivers/net/ethernet/xscale/ixp4xx_eth.c36
-rw-r--r--drivers/net/fddi/defxx.c21
-rw-r--r--drivers/net/fddi/skfp/fplustm.c27
-rw-r--r--drivers/net/fddi/skfp/h/supern_2.h96
-rw-r--r--drivers/net/fddi/skfp/h/targetos.h1
-rw-r--r--drivers/net/fddi/skfp/skfddi.c1
-rw-r--r--drivers/net/fddi/skfp/smt.c2
-rw-r--r--drivers/net/fddi/skfp/srf.c24
-rw-r--r--drivers/net/hamradio/6pack.c3
-rw-r--r--drivers/net/hamradio/bpqether.c2
-rw-r--r--drivers/net/hamradio/mkiss.c3
-rw-r--r--drivers/net/hippi/rrunner.c6
-rw-r--r--drivers/net/hyperv/hyperv_net.h3
-rw-r--r--drivers/net/hyperv/netvsc.c3
-rw-r--r--drivers/net/hyperv/netvsc_drv.c3
-rw-r--r--drivers/net/hyperv/rndis_filter.c3
-rw-r--r--drivers/net/ieee802154/at86rf230.c2
-rw-r--r--drivers/net/ieee802154/mrf24j40.c1
-rw-r--r--drivers/net/irda/Kconfig4
-rw-r--r--drivers/net/irda/au1k_ir.c4
-rw-r--r--drivers/net/irda/esi-sir.c4
-rw-r--r--drivers/net/irda/irda-usb.c1
-rw-r--r--drivers/net/irda/kingsun-sir.c1
-rw-r--r--drivers/net/irda/ks959-sir.c1
-rw-r--r--drivers/net/irda/ksdazzle-sir.c1
-rw-r--r--drivers/net/irda/litelink-sir.c4
-rw-r--r--drivers/net/irda/ma600-sir.c4
-rw-r--r--drivers/net/irda/mcs7780.c1
-rw-r--r--drivers/net/irda/old_belkin-sir.c4
-rw-r--r--drivers/net/irda/sh_irda.c2
-rw-r--r--drivers/net/irda/sh_sir.c2
-rw-r--r--drivers/net/irda/sir_dongle.c1
-rw-r--r--drivers/net/irda/smsc-ircc2.c4
-rw-r--r--drivers/net/irda/smsc-ircc2.h4
-rw-r--r--drivers/net/irda/stir4200.c1
-rw-r--r--drivers/net/irda/via-ircc.c5
-rw-r--r--drivers/net/irda/via-ircc.h3
-rw-r--r--drivers/net/irda/vlsi_ir.c7
-rw-r--r--drivers/net/irda/vlsi_ir.h4
-rw-r--r--drivers/net/loopback.c1
-rw-r--r--drivers/net/macvlan.c38
-rw-r--r--drivers/net/macvtap.c77
-rw-r--r--drivers/net/mdio.c28
-rw-r--r--drivers/net/phy/cicada.c4
-rw-r--r--drivers/net/phy/davicom.c2
-rw-r--r--drivers/net/phy/dp83640.c4
-rw-r--r--drivers/net/phy/icplus.c2
-rw-r--r--drivers/net/phy/lxt.c4
-rw-r--r--drivers/net/phy/marvell.c22
-rw-r--r--drivers/net/phy/mdio-gpio.c1
-rw-r--r--drivers/net/phy/mdio-moxart.c1
-rw-r--r--drivers/net/phy/mdio-mux-gpio.c1
-rw-r--r--drivers/net/phy/mdio-mux-mmioreg.c1
-rw-r--r--drivers/net/phy/mdio-octeon.c1
-rw-r--r--drivers/net/phy/mdio-sun4i.c1
-rw-r--r--drivers/net/phy/mdio_bus.c35
-rw-r--r--drivers/net/phy/micrel.c4
-rw-r--r--drivers/net/phy/phy.c429
-rw-r--r--drivers/net/phy/phy_device.c419
-rw-r--r--drivers/net/phy/spi_ks8995.c7
-rw-r--r--drivers/net/plip/plip.c4
-rw-r--r--drivers/net/ppp/ppp_mppe.c3
-rw-r--r--drivers/net/ppp/pppoe.c4
-rw-r--r--drivers/net/team/team.c6
-rw-r--r--drivers/net/team/team_mode_random.c8
-rw-r--r--drivers/net/tun.c68
-rw-r--r--drivers/net/usb/Kconfig5
-rw-r--r--drivers/net/usb/asix.h4
-rw-r--r--drivers/net/usb/asix_common.c3
-rw-r--r--drivers/net/usb/asix_devices.c3
-rw-r--r--drivers/net/usb/ax88172a.c3
-rw-r--r--drivers/net/usb/ax88179_178a.c3
-rw-r--r--drivers/net/usb/catc.c4
-rw-r--r--drivers/net/usb/cdc_eem.c4
-rw-r--r--drivers/net/usb/cdc_ether.c5
-rw-r--r--drivers/net/usb/cdc_ncm.c1
-rw-r--r--drivers/net/usb/cdc_subset.c4
-rw-r--r--drivers/net/usb/cx82310_eth.c4
-rw-r--r--drivers/net/usb/dm9601.c1
-rw-r--r--drivers/net/usb/gl620a.c4
-rw-r--r--drivers/net/usb/int51x1.c3
-rw-r--r--drivers/net/usb/ipheth.c1
-rw-r--r--drivers/net/usb/kalmia.c1
-rw-r--r--drivers/net/usb/kaweth.c4
-rw-r--r--drivers/net/usb/lg-vl600.c3
-rw-r--r--drivers/net/usb/mcs7830.c4
-rw-r--r--drivers/net/usb/net1080.c4
-rw-r--r--drivers/net/usb/plusb.c4
-rw-r--r--drivers/net/usb/r8152.c916
-rw-r--r--drivers/net/usb/r815x.c8
-rw-r--r--drivers/net/usb/rndis_host.c4
-rw-r--r--drivers/net/usb/rtl8150.c1
-rw-r--r--drivers/net/usb/sierra_net.c3
-rw-r--r--drivers/net/usb/smsc75xx.c4
-rw-r--r--drivers/net/usb/smsc75xx.h3
-rw-r--r--drivers/net/usb/smsc95xx.c4
-rw-r--r--drivers/net/usb/smsc95xx.h3
-rw-r--r--drivers/net/usb/sr9700.c1
-rw-r--r--drivers/net/usb/usbnet.c3
-rw-r--r--drivers/net/usb/zaurus.c4
-rw-r--r--drivers/net/virtio_net.c254
-rw-r--r--drivers/net/vmxnet3/vmxnet3_drv.c5
-rw-r--r--drivers/net/vmxnet3/vmxnet3_int.h1
-rw-r--r--drivers/net/vxlan.c308
-rw-r--r--drivers/net/wan/dscc4.c2
-rw-r--r--drivers/net/wan/hd64570.c1
-rw-r--r--drivers/net/wan/hd64570.h4
-rw-r--r--drivers/net/wan/hd64572.c1
-rw-r--r--drivers/net/wan/hd64572.h2
-rw-r--r--drivers/net/wan/lmc/lmc_main.c3
-rw-r--r--drivers/net/wan/pc300too.c1
-rw-r--r--drivers/net/wan/pci200syn.c1
-rw-r--r--drivers/net/wan/sbni.c1
-rw-r--r--drivers/net/wan/wanxl.c1
-rw-r--r--drivers/net/wireless/adm8211.c4
-rw-r--r--drivers/net/wireless/airo_cs.c1
-rw-r--r--drivers/net/wireless/at76c50x-usb.c3
-rw-r--r--drivers/net/wireless/ath/ar5523/ar5523.c1
-rw-r--r--drivers/net/wireless/ath/ath.h2
-rw-r--r--drivers/net/wireless/ath/ath10k/Kconfig7
-rw-r--r--drivers/net/wireless/ath/ath10k/ce.c53
-rw-r--r--drivers/net/wireless/ath/ath10k/ce.h2
-rw-r--r--drivers/net/wireless/ath/ath10k/core.c43
-rw-r--r--drivers/net/wireless/ath/ath10k/core.h34
-rw-r--r--drivers/net/wireless/ath/ath10k/debug.c160
-rw-r--r--drivers/net/wireless/ath/ath10k/debug.h6
-rw-r--r--drivers/net/wireless/ath/ath10k/htc.c31
-rw-r--r--drivers/net/wireless/ath/ath10k/htt.c4
-rw-r--r--drivers/net/wireless/ath/ath10k/htt.h2
-rw-r--r--drivers/net/wireless/ath/ath10k/htt_rx.c40
-rw-r--r--drivers/net/wireless/ath/ath10k/htt_tx.c11
-rw-r--r--drivers/net/wireless/ath/ath10k/hw.h2
-rw-r--r--drivers/net/wireless/ath/ath10k/mac.c677
-rw-r--r--drivers/net/wireless/ath/ath10k/pci.c791
-rw-r--r--drivers/net/wireless/ath/ath10k/pci.h14
-rw-r--r--drivers/net/wireless/ath/ath10k/trace.h21
-rw-r--r--drivers/net/wireless/ath/ath10k/txrx.c8
-rw-r--r--drivers/net/wireless/ath/ath10k/wmi.c408
-rw-r--r--drivers/net/wireless/ath/ath10k/wmi.h157
-rw-r--r--drivers/net/wireless/ath/ath5k/base.c34
-rw-r--r--drivers/net/wireless/ath/ath5k/dma.c11
-rw-r--r--drivers/net/wireless/ath/ath6kl/cfg80211.c11
-rw-r--r--drivers/net/wireless/ath/ath6kl/wmi.c6
-rw-r--r--drivers/net/wireless/ath/ath9k/Kconfig18
-rw-r--r--drivers/net/wireless/ath/ath9k/Makefile14
-rw-r--r--drivers/net/wireless/ath/ath9k/antenna.c8
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9002_hw.c23
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9002_mac.c6
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9002_phy.c1
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h222
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_buffalo_initvals.h126
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_calib.c385
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_eeprom.c65
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_eeprom.h14
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_hw.c297
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_mac.c18
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_phy.c106
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_phy.h24
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9003_wow.c422
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9330_1p1_initvals.h128
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9330_1p2_initvals.h401
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9340_initvals.h392
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9462_2p0_initvals.h575
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9462_2p1_initvals.h1559
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9485_initvals.h117
-rw-r--r--drivers/net/wireless/ath/ath9k/ar953x_initvals.h718
-rw-r--r--drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h540
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h85
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9565_1p1_initvals.h64
-rw-r--r--drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h572
-rw-r--r--drivers/net/wireless/ath/ath9k/ath9k.h434
-rw-r--r--drivers/net/wireless/ath/ath9k/beacon.c147
-rw-r--r--drivers/net/wireless/ath/ath9k/btcoex.c6
-rw-r--r--drivers/net/wireless/ath/ath9k/common.c4
-rw-r--r--drivers/net/wireless/ath/ath9k/debug.c632
-rw-r--r--drivers/net/wireless/ath/ath9k/debug.h44
-rw-r--r--drivers/net/wireless/ath/ath9k/debug_sta.c269
-rw-r--r--drivers/net/wireless/ath/ath9k/dfs.c4
-rw-r--r--drivers/net/wireless/ath/ath9k/eeprom_4k.c26
-rw-r--r--drivers/net/wireless/ath/ath9k/eeprom_9287.c26
-rw-r--r--drivers/net/wireless/ath/ath9k/eeprom_def.c26
-rw-r--r--drivers/net/wireless/ath/ath9k/gpio.c89
-rw-r--r--drivers/net/wireless/ath/ath9k/htc.h5
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_beacon.c39
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_gpio.c17
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_init.c3
-rw-r--r--drivers/net/wireless/ath/ath9k/htc_drv_txrx.c4
-rw-r--r--drivers/net/wireless/ath/ath9k/hw-ops.h47
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.c608
-rw-r--r--drivers/net/wireless/ath/ath9k/hw.h75
-rw-r--r--drivers/net/wireless/ath/ath9k/init.c72
-rw-r--r--drivers/net/wireless/ath/ath9k/link.c67
-rw-r--r--drivers/net/wireless/ath/ath9k/mac.c51
-rw-r--r--drivers/net/wireless/ath/ath9k/mac.h8
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c671
-rw-r--r--drivers/net/wireless/ath/ath9k/mci.c2
-rw-r--r--drivers/net/wireless/ath/ath9k/pci.c134
-rw-r--r--drivers/net/wireless/ath/ath9k/recv.c247
-rw-r--r--drivers/net/wireless/ath/ath9k/reg.h29
-rw-r--r--drivers/net/wireless/ath/ath9k/spectral.c543
-rw-r--r--drivers/net/wireless/ath/ath9k/spectral.h212
-rw-r--r--drivers/net/wireless/ath/ath9k/tx99.c272
-rw-r--r--drivers/net/wireless/ath/ath9k/wow.c588
-rw-r--r--drivers/net/wireless/ath/ath9k/xmit.c27
-rw-r--r--drivers/net/wireless/ath/carl9170/debug.c1
-rw-r--r--drivers/net/wireless/ath/carl9170/main.c13
-rw-r--r--drivers/net/wireless/ath/carl9170/rx.c14
-rw-r--r--drivers/net/wireless/ath/carl9170/tx.c1
-rw-r--r--drivers/net/wireless/ath/main.c8
-rw-r--r--drivers/net/wireless/ath/regd.c379
-rw-r--r--drivers/net/wireless/ath/wcn36xx/hal.h2
-rw-r--r--drivers/net/wireless/ath/wcn36xx/main.c3
-rw-r--r--drivers/net/wireless/ath/wcn36xx/smd.c65
-rw-r--r--drivers/net/wireless/ath/wcn36xx/wcn36xx.h2
-rw-r--r--drivers/net/wireless/ath/wil6210/interrupt.c13
-rw-r--r--drivers/net/wireless/ath/wil6210/txrx.c8
-rw-r--r--drivers/net/wireless/ath/wil6210/wil6210.h1
-rw-r--r--drivers/net/wireless/atmel.c8
-rw-r--r--drivers/net/wireless/atmel.h4
-rw-r--r--drivers/net/wireless/atmel_cs.c5
-rw-r--r--drivers/net/wireless/atmel_pci.c5
-rw-r--r--drivers/net/wireless/b43/b43.h4
-rw-r--r--drivers/net/wireless/b43/main.c27
-rw-r--r--drivers/net/wireless/b43/xmit.c4
-rw-r--r--drivers/net/wireless/b43legacy/main.c1
-rw-r--r--drivers/net/wireless/brcm80211/Kconfig5
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/Makefile5
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/bcdc.c375
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/bcdc.h24
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c737
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c539
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd.h487
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h44
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c392
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c31
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.c36
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h2
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c207
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_proto.h42
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c1596
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/fweh.h54
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/fwil.c19
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/fwil.h61
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/fwil_types.h304
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c216
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/nvram.c94
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/nvram.h24
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/p2p.c52
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/proto.c62
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/proto.h57
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c827
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h39
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h83
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/tracepoint.h33
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/usb.c9
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c194
-rw-r--r--drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h5
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/channel.c38
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c67
-rw-r--r--drivers/net/wireless/brcm80211/brcmsmac/main.c2
-rw-r--r--drivers/net/wireless/brcm80211/include/brcm_hw_ids.h1
-rw-r--r--drivers/net/wireless/brcm80211/include/brcmu_wifi.h14
-rw-r--r--drivers/net/wireless/cw1200/cw1200_sdio.c4
-rw-r--r--drivers/net/wireless/cw1200/fwio.c1
-rw-r--r--drivers/net/wireless/cw1200/main.c2
-rw-r--r--drivers/net/wireless/cw1200/pm.c11
-rw-r--r--drivers/net/wireless/cw1200/scan.c15
-rw-r--r--drivers/net/wireless/cw1200/sta.c5
-rw-r--r--drivers/net/wireless/cw1200/txrx.c3
-rw-r--r--drivers/net/wireless/hostap/hostap_80211_rx.c8
-rw-r--r--drivers/net/wireless/hostap/hostap_80211_tx.c4
-rw-r--r--drivers/net/wireless/hostap/hostap_ap.c28
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c1
-rw-r--r--drivers/net/wireless/hostap/hostap_hw.c2
-rw-r--r--drivers/net/wireless/hostap/hostap_ioctl.c6
-rw-r--r--drivers/net/wireless/hostap/hostap_main.c8
-rw-r--r--drivers/net/wireless/hostap/hostap_pci.c1
-rw-r--r--drivers/net/wireless/hostap/hostap_plx.c1
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c5
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2200.c42
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2200.h1
-rw-r--r--drivers/net/wireless/ipw2x00/libipw_rx.c12
-rw-r--r--drivers/net/wireless/iwlegacy/3945-debug.c6
-rw-r--r--drivers/net/wireless/iwlegacy/3945-mac.c11
-rw-r--r--drivers/net/wireless/iwlegacy/3945-rs.c1
-rw-r--r--drivers/net/wireless/iwlegacy/3945.c5
-rw-r--r--drivers/net/wireless/iwlegacy/4965-debug.c6
-rw-r--r--drivers/net/wireless/iwlegacy/4965-mac.c8
-rw-r--r--drivers/net/wireless/iwlegacy/4965-rs.c1
-rw-r--r--drivers/net/wireless/iwlegacy/4965.c1
-rw-r--r--drivers/net/wireless/iwlegacy/common.c13
-rw-r--r--drivers/net/wireless/iwlegacy/debug.c10
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/agn.h4
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/calib.c4
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/calib.h4
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/commands.h4
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/debugfs.c10
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/dev.h2
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/devices.c2
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/led.c3
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/led.h2
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/lib.c3
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/mac80211.c18
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/main.c6
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/power.c3
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/power.h2
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/rs.c3
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/rs.h9
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/rx.c9
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/rxon.c2
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/scan.c4
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/sta.c2
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/tt.c3
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/tt.h2
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/tx.c4
-rw-r--r--drivers/net/wireless/iwlwifi/dvm/ucode.c10
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-1000.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-2000.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-5000.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-6000.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-7000.c6
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn-hw.h4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-config.h12
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-csr.h7
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-debug.h2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-devtrace.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-devtrace.h2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-drv.c43
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-drv.h6
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-eeprom-parse.c15
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-eeprom-parse.h4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-eeprom-read.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-eeprom-read.h4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-fh.h4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-fw-file.h5
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-fw.h50
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-io.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-io.h2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-modparams.h4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-notif-wait.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-notif-wait.h4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-nvm-parse.c17
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-nvm-parse.h4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-op-mode.h8
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-phy-db.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-phy-db.h4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-prph.h11
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-trans.h87
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/Makefile4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/binding.c20
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/bt-coex.c21
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/constants.h4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/d3.c57
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/debugfs-vif.c546
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/debugfs.c689
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/debugfs.h101
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api-bt-coex.h5
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api-d3.h4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api-mac.h4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api-power.h20
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api-rs.h31
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h9
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api-sta.h17
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api-tx.h5
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw-api.h69
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/fw.c32
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/led.c6
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/mac-ctxt.c211
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/mac80211.c342
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/mvm.h63
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/nvm.c51
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/ops.c28
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/phy-ctxt.c4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/power.c400
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/power_legacy.c4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/quota.c7
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/rs.c2192
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/rs.h154
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/rx.c10
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/scan.c72
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/sf.c291
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/sta.c50
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/sta.h10
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/testmode.h4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/time-event.c8
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/time-event.h4
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/tt.c8
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/tx.c27
-rw-r--r--drivers/net/wireless/iwlwifi/mvm/utils.c21
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/drv.c9
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/internal.h65
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/rx.c437
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/trans.c183
-rw-r--r--drivers/net/wireless/iwlwifi/pcie/tx.c172
-rw-r--r--drivers/net/wireless/libertas/README5
-rw-r--r--drivers/net/wireless/libertas/cfg.c7
-rw-r--r--drivers/net/wireless/libertas/if_sdio.c6
-rw-r--r--drivers/net/wireless/libertas/if_spi.c1
-rw-r--r--drivers/net/wireless/mac80211_hwsim.c1213
-rw-r--r--drivers/net/wireless/mac80211_hwsim.h18
-rw-r--r--drivers/net/wireless/mwifiex/11n.c2
-rw-r--r--drivers/net/wireless/mwifiex/11n_aggr.c6
-rw-r--r--drivers/net/wireless/mwifiex/Kconfig4
-rw-r--r--drivers/net/wireless/mwifiex/cfg80211.c70
-rw-r--r--drivers/net/wireless/mwifiex/cmdevt.c4
-rw-r--r--drivers/net/wireless/mwifiex/decl.h1
-rw-r--r--drivers/net/wireless/mwifiex/fw.h41
-rw-r--r--drivers/net/wireless/mwifiex/init.c3
-rw-r--r--drivers/net/wireless/mwifiex/main.c11
-rw-r--r--drivers/net/wireless/mwifiex/main.h7
-rw-r--r--drivers/net/wireless/mwifiex/scan.c8
-rw-r--r--drivers/net/wireless/mwifiex/sta_cmd.c80
-rw-r--r--drivers/net/wireless/mwifiex/sta_cmdresp.c38
-rw-r--r--drivers/net/wireless/mwifiex/sta_ioctl.c20
-rw-r--r--drivers/net/wireless/mwifiex/sta_rx.c46
-rw-r--r--drivers/net/wireless/mwifiex/sta_tx.c1
-rw-r--r--drivers/net/wireless/mwifiex/txrx.c15
-rw-r--r--drivers/net/wireless/mwifiex/uap_txrx.c39
-rw-r--r--drivers/net/wireless/mwifiex/usb.c58
-rw-r--r--drivers/net/wireless/mwifiex/usb.h12
-rw-r--r--drivers/net/wireless/mwifiex/util.c5
-rw-r--r--drivers/net/wireless/mwl8k.c5
-rw-r--r--drivers/net/wireless/orinoco/hermes.c1
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c1
-rw-r--r--drivers/net/wireless/orinoco/orinoco_usb.c1
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c1
-rw-r--r--drivers/net/wireless/p54/eeprom.c1
-rw-r--r--drivers/net/wireless/p54/fwio.c1
-rw-r--r--drivers/net/wireless/p54/led.c1
-rw-r--r--drivers/net/wireless/p54/main.c2
-rw-r--r--drivers/net/wireless/p54/net2280.h3
-rw-r--r--drivers/net/wireless/p54/p54pci.c1
-rw-r--r--drivers/net/wireless/p54/p54usb.c1
-rw-r--r--drivers/net/wireless/p54/txrx.c5
-rw-r--r--drivers/net/wireless/prism54/isl_38xx.c3
-rw-r--r--drivers/net/wireless/prism54/isl_38xx.h3
-rw-r--r--drivers/net/wireless/prism54/isl_ioctl.c6
-rw-r--r--drivers/net/wireless/prism54/isl_ioctl.h3
-rw-r--r--drivers/net/wireless/prism54/isl_oid.h3
-rw-r--r--drivers/net/wireless/prism54/islpci_dev.c4
-rw-r--r--drivers/net/wireless/prism54/islpci_dev.h3
-rw-r--r--drivers/net/wireless/prism54/islpci_eth.c3
-rw-r--r--drivers/net/wireless/prism54/islpci_eth.h3
-rw-r--r--drivers/net/wireless/prism54/islpci_hotplug.c5
-rw-r--r--drivers/net/wireless/prism54/islpci_mgt.c3
-rw-r--r--drivers/net/wireless/prism54/islpci_mgt.h3
-rw-r--r--drivers/net/wireless/prism54/oid_mgt.c3
-rw-r--r--drivers/net/wireless/prism54/oid_mgt.h3
-rw-r--r--drivers/net/wireless/prism54/prismcompat.h3
-rw-r--r--drivers/net/wireless/ray_cs.c3
-rw-r--r--drivers/net/wireless/rndis_wlan.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt2400pci.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt2500pci.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt2500usb.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.c41
-rw-r--r--drivers/net/wireless/rt2x00/rt2800lib.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800mmio.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800mmio.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800pci.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800pci.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800soc.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.c6
-rw-r--r--drivers/net/wireless/rt2x00/rt2800usb.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00config.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00crypto.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00debug.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00debug.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c8
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dump.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00firmware.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00leds.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00leds.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00lib.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00link.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mac.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mmio.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00mmio.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00pci.c7
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00pci.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00queue.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00reg.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00soc.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00soc.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00usb.c4
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00usb.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt61pci.h4
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.c5
-rw-r--r--drivers/net/wireless/rt2x00/rt73usb.h4
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180/dev.c1
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180/grf5101.c1
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180/max2820.c1
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180/rtl8225.c1
-rw-r--r--drivers/net/wireless/rtl818x/rtl8180/sa2400.c1
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187/dev.c3
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187/rtl8225.c1
-rw-r--r--drivers/net/wireless/rtlwifi/base.c8
-rw-r--r--drivers/net/wireless/rtlwifi/cam.c4
-rw-r--r--drivers/net/wireless/rtlwifi/core.c11
-rw-r--r--drivers/net/wireless/rtlwifi/pci.c2
-rw-r--r--drivers/net/wireless/rtlwifi/ps.c4
-rw-r--r--drivers/net/wireless/rtlwifi/regd.c61
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8188ee/dm.c2
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c327
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192c/dm_common.h14
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c39
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/dm.c9
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/dm.h3
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/hw.c2
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/phy.c6
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/rf.c29
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/sw.c17
-rw-r--r--drivers/net/wireless/rtlwifi/rtl8192cu/table.c40
-rw-r--r--drivers/net/wireless/rtlwifi/stats.c14
-rw-r--r--drivers/net/wireless/rtlwifi/usb.c8
-rw-r--r--drivers/net/wireless/rtlwifi/wifi.h33
-rw-r--r--drivers/net/wireless/ti/wl1251/acx.c258
-rw-r--r--drivers/net/wireless/ti/wl1251/acx.h26
-rw-r--r--drivers/net/wireless/ti/wl1251/boot.c3
-rw-r--r--drivers/net/wireless/ti/wl1251/cmd.c58
-rw-r--r--drivers/net/wireless/ti/wl1251/cmd.h8
-rw-r--r--drivers/net/wireless/ti/wl1251/event.c46
-rw-r--r--drivers/net/wireless/ti/wl1251/event.h7
-rw-r--r--drivers/net/wireless/ti/wl1251/init.c13
-rw-r--r--drivers/net/wireless/ti/wl1251/main.c153
-rw-r--r--drivers/net/wireless/ti/wl1251/rx.c2
-rw-r--r--drivers/net/wireless/ti/wl1251/tx.c35
-rw-r--r--drivers/net/wireless/ti/wl1251/wl1251.h6
-rw-r--r--drivers/net/wireless/ti/wl12xx/scan.c2
-rw-r--r--drivers/net/wireless/ti/wlcore/cmd.c2
-rw-r--r--drivers/net/wireless/ti/wlcore/main.c14
-rw-r--r--drivers/net/wireless/ti/wlcore/scan.c12
-rw-r--r--drivers/net/wireless/wl3501_cs.c5
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_chip.h3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_def.h3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.c8
-rw-r--r--drivers/net/wireless/zd1211rw/zd_mac.h3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf.h3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf_al2230.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf_al7230b.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf_rf2959.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_rf_uw2453.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_usb.c3
-rw-r--r--drivers/net/wireless/zd1211rw/zd_usb.h3
-rw-r--r--drivers/net/xen-netback/common.h28
-rw-r--r--drivers/net/xen-netback/interface.c47
-rw-r--r--drivers/net/xen-netback/netback.c506
-rw-r--r--drivers/net/xen-netback/xenbus.c3
-rw-r--r--drivers/net/xen-netfront.c96
-rw-r--r--drivers/nfc/Kconfig1
-rw-r--r--drivers/nfc/Makefile1
-rw-r--r--drivers/nfc/mei_phy.c6
-rw-r--r--drivers/nfc/microread/i2c.c4
-rw-r--r--drivers/nfc/microread/mei.c4
-rw-r--r--drivers/nfc/microread/microread.c4
-rw-r--r--drivers/nfc/microread/microread.h4
-rw-r--r--drivers/nfc/nfcmrvl/Kconfig23
-rw-r--r--drivers/nfc/nfcmrvl/Makefile9
-rw-r--r--drivers/nfc/nfcmrvl/main.c165
-rw-r--r--drivers/nfc/nfcmrvl/nfcmrvl.h48
-rw-r--r--drivers/nfc/nfcmrvl/usb.c459
-rw-r--r--drivers/nfc/nfcwilink.c3
-rw-r--r--drivers/nfc/pn533.c7
-rw-r--r--drivers/nfc/pn544/i2c.c4
-rw-r--r--drivers/nfc/pn544/mei.c4
-rw-r--r--drivers/nfc/pn544/pn544.c50
-rw-r--r--drivers/nfc/pn544/pn544.h4
-rw-r--r--drivers/nfc/port100.c1
-rw-r--r--drivers/of/of_mdio.c155
-rw-r--r--drivers/of/of_net.c1
-rw-r--r--drivers/phy/Kconfig1
-rw-r--r--drivers/power/Kconfig1
-rw-r--r--drivers/ptp/Kconfig1
-rw-r--r--drivers/s390/net/Makefile2
-rw-r--r--drivers/s390/net/netiucv.c8
-rw-r--r--drivers/s390/net/qeth_core.h38
-rw-r--r--drivers/s390/net/qeth_core_main.c215
-rw-r--r--drivers/s390/net/qeth_core_mpc.c2
-rw-r--r--drivers/s390/net/qeth_core_mpc.h150
-rw-r--r--drivers/s390/net/qeth_l2.h15
-rw-r--r--drivers/s390/net/qeth_l2_main.c594
-rw-r--r--drivers/s390/net/qeth_l2_sys.c223
-rw-r--r--drivers/ssb/driver_chipcommon_sflash.c6
-rw-r--r--drivers/staging/cxt1e1/linux.c15
-rw-r--r--drivers/staging/dgap/Kconfig2
-rw-r--r--drivers/staging/iio/adc/Kconfig2
-rw-r--r--drivers/staging/ozwpan/ozcdev.c2
-rw-r--r--drivers/staging/ozwpan/ozproto.c5
-rw-r--r--drivers/staging/winbond/wbusb.c1
-rw-r--r--drivers/vhost/net.c9
-rw-r--r--drivers/vhost/scsi.c7
-rw-r--r--drivers/vhost/test.c8
-rw-r--r--drivers/vhost/vhost.c4
-rw-r--r--drivers/vhost/vhost.h2
-rw-r--r--fs/dlm/lowcomms.c4
-rw-r--r--include/asm-generic/hash.h9
-rw-r--r--include/linux/ath9k_platform.h2
-rw-r--r--include/linux/bcma/bcma.h9
-rw-r--r--include/linux/cgroup_subsys.h4
-rw-r--r--include/linux/etherdevice.h118
-rw-r--r--include/linux/filter.h5
-rw-r--r--include/linux/flex_array.h3
-rw-r--r--include/linux/hash.h36
-rw-r--r--include/linux/ieee80211.h10
-rw-r--r--include/linux/if_macvlan.h37
-rw-r--r--include/linux/if_tunnel.h9
-rw-r--r--include/linux/if_vlan.h38
-rw-r--r--include/linux/inet_lro.h23
-rw-r--r--include/linux/inetdevice.h14
-rw-r--r--include/linux/ipv6.h8
-rw-r--r--include/linux/kernel.h19
-rw-r--r--include/linux/mdio.h3
-rw-r--r--include/linux/mlx4/cmd.h1
-rw-r--r--include/linux/mlx4/cq.h5
-rw-r--r--include/linux/mlx4/device.h39
-rw-r--r--include/linux/mlx4/qp.h6
-rw-r--r--include/linux/mmc/sdio_ids.h9
-rw-r--r--include/linux/net.h3
-rw-r--r--include/linux/netdevice.h156
-rw-r--r--include/linux/netfilter/ipset/ip_set.h1
-rw-r--r--include/linux/netlink.h2
-rw-r--r--include/linux/of_mdio.h10
-rw-r--r--include/linux/phy.h116
-rw-r--r--include/linux/platform_data/eth-netx.h6
-rw-r--r--include/linux/platform_data/pn544.h3
-rw-r--r--include/linux/printk.h7
-rw-r--r--include/linux/random.h18
-rw-r--r--include/linux/reciprocal_div.h39
-rw-r--r--include/linux/sctp.h7
-rw-r--r--include/linux/sh_eth.h1
-rw-r--r--include/linux/skbuff.h229
-rw-r--r--include/linux/slab_def.h4
-rw-r--r--include/linux/socket.h16
-rw-r--r--include/linux/stmmac.h26
-rw-r--r--include/linux/tcp.h5
-rw-r--r--include/net/Space.h31
-rw-r--r--include/net/act_api.h63
-rw-r--r--include/net/addrconf.h16
-rw-r--r--include/net/arp.h1
-rw-r--r--include/net/bluetooth/bluetooth.h3
-rw-r--r--include/net/bluetooth/hci.h10
-rw-r--r--include/net/bluetooth/hci_core.h7
-rw-r--r--include/net/bluetooth/l2cap.h46
-rw-r--r--include/net/cfg80211.h323
-rw-r--r--include/net/cipso_ipv4.h5
-rw-r--r--include/net/cls_cgroup.h40
-rw-r--r--include/net/codel.h4
-rw-r--r--include/net/dcbevent.h3
-rw-r--r--include/net/dcbnl.h3
-rw-r--r--include/net/dn_dev.h2
-rw-r--r--include/net/dst.h5
-rw-r--r--include/net/flow.h3
-rw-r--r--include/net/genetlink.h4
-rw-r--r--include/net/gre.h3
-rw-r--r--include/net/if_inet6.h2
-rw-r--r--include/net/inet_timewait_sock.h6
-rw-r--r--include/net/inetpeer.h1
-rw-r--r--include/net/ip.h42
-rw-r--r--include/net/ip6_fib.h2
-rw-r--r--include/net/ip6_route.h34
-rw-r--r--include/net/ip6_tunnel.h2
-rw-r--r--include/net/ip_tunnels.h10
-rw-r--r--include/net/ipv6.h26
-rw-r--r--include/net/irda/discovery.h4
-rw-r--r--include/net/irda/ircomm_core.h4
-rw-r--r--include/net/irda/ircomm_event.h4
-rw-r--r--include/net/irda/ircomm_lmp.h4
-rw-r--r--include/net/irda/ircomm_param.h4
-rw-r--r--include/net/irda/ircomm_ttp.h4
-rw-r--r--include/net/irda/ircomm_tty.h4
-rw-r--r--include/net/irda/ircomm_tty_attach.h4
-rw-r--r--include/net/irda/irda_device.h4
-rw-r--r--include/net/irda/irlap_event.h4
-rw-r--r--include/net/irda/irlap_frame.h4
-rw-r--r--include/net/irda/parameters.h4
-rw-r--r--include/net/irda/qos.h4
-rw-r--r--include/net/llc.h1
-rw-r--r--include/net/mac80211.h138
-rw-r--r--include/net/mip6.h3
-rw-r--r--include/net/neighbour.h83
-rw-r--r--include/net/netfilter/ipv4/nf_conntrack_ipv4.h2
-rw-r--r--include/net/netfilter/ipv4/nf_reject.h128
-rw-r--r--include/net/netfilter/ipv6/nf_reject.h171
-rw-r--r--include/net/netfilter/nf_conntrack_l3proto.h1
-rw-r--r--include/net/netfilter/nf_queue.h62
-rw-r--r--include/net/netfilter/nf_tables.h47
-rw-r--r--include/net/netfilter/nf_tables_ipv4.h5
-rw-r--r--include/net/netfilter/nf_tables_ipv6.h3
-rw-r--r--include/net/netlabel.h3
-rw-r--r--include/net/netns/conntrack.h33
-rw-r--r--include/net/netns/ipv4.h2
-rw-r--r--include/net/netns/ipv6.h2
-rw-r--r--include/net/netns/nftables.h1
-rw-r--r--include/net/netns/xfrm.h6
-rw-r--r--include/net/netprio_cgroup.h18
-rw-r--r--include/net/nfc/digital.h10
-rw-r--r--include/net/nfc/hci.h4
-rw-r--r--include/net/nfc/llc.h4
-rw-r--r--include/net/nfc/nci.h3
-rw-r--r--include/net/nfc/nci_core.h5
-rw-r--r--include/net/nfc/nfc.h4
-rw-r--r--include/net/ping.h16
-rw-r--r--include/net/pkt_cls.h67
-rw-r--r--include/net/pkt_sched.h1
-rw-r--r--include/net/protocol.h10
-rw-r--r--include/net/red.h5
-rw-r--r--include/net/regulatory.h84
-rw-r--r--include/net/route.h27
-rw-r--r--include/net/rtnetlink.h17
-rw-r--r--include/net/sch_generic.h4
-rw-r--r--include/net/sctp/auth.h5
-rw-r--r--include/net/sctp/checksum.h5
-rw-r--r--include/net/sctp/command.h5
-rw-r--r--include/net/sctp/constants.h5
-rw-r--r--include/net/sctp/sctp.h32
-rw-r--r--include/net/sctp/sm.h5
-rw-r--r--include/net/sctp/structs.h65
-rw-r--r--include/net/sctp/tsnmap.h5
-rw-r--r--include/net/sctp/ulpevent.h5
-rw-r--r--include/net/sctp/ulpqueue.h5
-rw-r--r--include/net/sock.h26
-rw-r--r--include/net/tc_act/tc_skbedit.h3
-rw-r--r--include/net/tcp.h11
-rw-r--r--include/net/transp_v6.h9
-rw-r--r--include/net/vxlan.h1
-rw-r--r--include/net/xfrm.h16
-rw-r--r--include/trace/events/net.h158
-rw-r--r--include/uapi/asm-generic/socket.h2
-rw-r--r--include/uapi/linux/if_addr.h6
-rw-r--r--include/uapi/linux/if_arp.h1
-rw-r--r--include/uapi/linux/if_link.h48
-rw-r--r--include/uapi/linux/if_packet.h29
-rw-r--r--include/uapi/linux/in6.h6
-rw-r--r--include/uapi/linux/net_tstamp.h16
-rw-r--r--include/uapi/linux/netconf.h1
-rw-r--r--include/uapi/linux/netfilter.h1
-rw-r--r--include/uapi/linux/netfilter/Kbuild3
-rw-r--r--include/uapi/linux/netfilter/nf_nat.h12
-rw-r--r--include/uapi/linux/netfilter/nf_tables.h30
-rw-r--r--include/uapi/linux/netfilter/nfnetlink_queue.h5
-rw-r--r--include/uapi/linux/netfilter/xt_cgroup.h11
-rw-r--r--include/uapi/linux/netfilter/xt_ipcomp.h16
-rw-r--r--include/uapi/linux/netfilter/xt_l2tp.h27
-rw-r--r--include/uapi/linux/netfilter/xt_osf.h3
-rw-r--r--include/uapi/linux/nl80211.h129
-rw-r--r--include/uapi/linux/openvswitch.h14
-rw-r--r--include/uapi/linux/pci_regs.h5
-rw-r--r--include/uapi/linux/pkt_sched.h53
-rw-r--r--include/uapi/linux/sctp.h5
-rw-r--r--include/uapi/linux/snmp.h1
-rw-r--r--include/uapi/linux/sockios.h3
-rw-r--r--include/uapi/linux/tc_act/tc_ipt.h1
-rw-r--r--include/uapi/linux/tcp_metrics.h2
-rw-r--r--lib/Makefile2
-rw-r--r--lib/average.c6
-rw-r--r--lib/flex_array.c7
-rw-r--r--lib/hash.c39
-rw-r--r--lib/kobject_uevent.c10
-rw-r--r--lib/reciprocal_div.c24
-rw-r--r--net/802/garp.c2
-rw-r--r--net/802/hippi.c4
-rw-r--r--net/802/mrp.c2
-rw-r--r--net/8021q/Kconfig10
-rw-r--r--net/8021q/vlan.c2
-rw-r--r--net/8021q/vlan_dev.c6
-rw-r--r--net/Kconfig11
-rw-r--r--net/Makefile2
-rw-r--r--net/appletalk/aarp.c13
-rw-r--r--net/appletalk/ddp.c4
-rw-r--r--net/atm/lec.c9
-rw-r--r--net/atm/mpc.c2
-rw-r--r--net/ax25/af_ax25.c4
-rw-r--r--net/batman-adv/Makefile6
-rw-r--r--net/batman-adv/bat_algo.h6
-rw-r--r--net/batman-adv/bat_iv_ogm.c888
-rw-r--r--net/batman-adv/bitarray.c6
-rw-r--r--net/batman-adv/bitarray.h6
-rw-r--r--net/batman-adv/bridge_loop_avoidance.c30
-rw-r--r--net/batman-adv/bridge_loop_avoidance.h6
-rw-r--r--net/batman-adv/debugfs.c95
-rw-r--r--net/batman-adv/debugfs.h8
-rw-r--r--net/batman-adv/distributed-arp-table.c15
-rw-r--r--net/batman-adv/distributed-arp-table.h12
-rw-r--r--net/batman-adv/fragmentation.c6
-rw-r--r--net/batman-adv/fragmentation.h6
-rw-r--r--net/batman-adv/gateway_client.c303
-rw-r--r--net/batman-adv/gateway_client.h12
-rw-r--r--net/batman-adv/gateway_common.c8
-rw-r--r--net/batman-adv/gateway_common.h6
-rw-r--r--net/batman-adv/hard-interface.c19
-rw-r--r--net/batman-adv/hard-interface.h24
-rw-r--r--net/batman-adv/hash.c6
-rw-r--r--net/batman-adv/hash.h6
-rw-r--r--net/batman-adv/icmp_socket.c9
-rw-r--r--net/batman-adv/icmp_socket.h6
-rw-r--r--net/batman-adv/main.c56
-rw-r--r--net/batman-adv/main.h19
-rw-r--r--net/batman-adv/network-coding.c55
-rw-r--r--net/batman-adv/network-coding.h13
-rw-r--r--net/batman-adv/originator.c542
-rw-r--r--net/batman-adv/originator.h26
-rw-r--r--net/batman-adv/packet.h7
-rw-r--r--net/batman-adv/routing.c441
-rw-r--r--net/batman-adv/routing.h18
-rw-r--r--net/batman-adv/send.c41
-rw-r--r--net/batman-adv/send.h16
-rw-r--r--net/batman-adv/soft-interface.c111
-rw-r--r--net/batman-adv/soft-interface.h6
-rw-r--r--net/batman-adv/sysfs.c94
-rw-r--r--net/batman-adv/sysfs.h6
-rw-r--r--net/batman-adv/translation-table.c94
-rw-r--r--net/batman-adv/translation-table.h10
-rw-r--r--net/batman-adv/types.h150
-rw-r--r--net/bluetooth/6lowpan.c860
-rw-r--r--net/bluetooth/6lowpan.h26
-rw-r--r--net/bluetooth/Kconfig1
-rw-r--r--net/bluetooth/Makefile2
-rw-r--r--net/bluetooth/af_bluetooth.c2
-rw-r--r--net/bluetooth/bnep/bnep.h3
-rw-r--r--net/bluetooth/hci_core.c78
-rw-r--r--net/bluetooth/hci_event.c75
-rw-r--r--net/bluetooth/l2cap_core.c756
-rw-r--r--net/bluetooth/l2cap_sock.c186
-rw-r--r--net/bluetooth/mgmt.c17
-rw-r--r--net/bluetooth/rfcomm/tty.c103
-rw-r--r--net/bluetooth/smp.c56
-rw-r--r--net/bluetooth/smp.h1
-rw-r--r--net/bridge/br.c21
-rw-r--r--net/bridge/br_device.c10
-rw-r--r--net/bridge/br_fdb.c3
-rw-r--r--net/bridge/br_forward.c6
-rw-r--r--net/bridge/br_if.c17
-rw-r--r--net/bridge/br_input.c2
-rw-r--r--net/bridge/br_ioctl.c2
-rw-r--r--net/bridge/br_netfilter.c2
-rw-r--r--net/bridge/br_netlink.c12
-rw-r--r--net/bridge/br_private.h13
-rw-r--r--net/bridge/br_stp_timer.c2
-rw-r--r--net/bridge/br_sysfs_br.c249
-rw-r--r--net/bridge/br_sysfs_if.c20
-rw-r--r--net/bridge/br_vlan.c23
-rw-r--r--net/bridge/netfilter/ebt_log.c2
-rw-r--r--net/bridge/netfilter/ebt_snat.c2
-rw-r--r--net/bridge/netfilter/ebt_vlan.c3
-rw-r--r--net/bridge/netfilter/ebtable_broute.c6
-rw-r--r--net/bridge/netfilter/ebtable_filter.c9
-rw-r--r--net/bridge/netfilter/ebtable_nat.c9
-rw-r--r--net/bridge/netfilter/ebtables.c17
-rw-r--r--net/bridge/netfilter/nf_tables_bridge.c44
-rw-r--r--net/caif/caif_usb.c5
-rw-r--r--net/caif/chnl_net.c3
-rw-r--r--net/can/bcm.c4
-rw-r--r--net/can/gw.c21
-rw-r--r--net/can/raw.c4
-rw-r--r--net/core/Makefile3
-rw-r--r--net/core/dev.c562
-rw-r--r--net/core/dev_addr_lists.c115
-rw-r--r--net/core/dev_ioctl.c2
-rw-r--r--net/core/flow_dissector.c6
-rw-r--r--net/core/neighbour.c477
-rw-r--r--net/core/net-sysfs.c82
-rw-r--r--net/core/net-sysfs.h2
-rw-r--r--net/core/netclassid_cgroup.c120
-rw-r--r--net/core/netpoll.c4
-rw-r--r--net/core/netprio_cgroup.c2
-rw-r--r--net/core/pktgen.c88
-rw-r--r--net/core/rtnetlink.c176
-rw-r--r--net/core/skbuff.c366
-rw-r--r--net/core/sock.c43
-rw-r--r--net/core/stream.c2
-rw-r--r--net/core/sysctl_net_core.c3
-rw-r--r--net/dcb/dcbevent.c3
-rw-r--r--net/dcb/dcbnl.c18
-rw-r--r--net/dccp/ccids/lib/tfrc.c2
-rw-r--r--net/dccp/ccids/lib/tfrc.h1
-rw-r--r--net/dccp/dccp.h1
-rw-r--r--net/dccp/ipv4.c3
-rw-r--r--net/dccp/ipv6.c11
-rw-r--r--net/dccp/options.c32
-rw-r--r--net/decnet/af_decnet.c3
-rw-r--r--net/decnet/dn_dev.c13
-rw-r--r--net/decnet/dn_neigh.c28
-rw-r--r--net/decnet/dn_route.c12
-rw-r--r--net/dns_resolver/dns_key.c3
-rw-r--r--net/dns_resolver/dns_query.c3
-rw-r--r--net/dns_resolver/internal.h3
-rw-r--r--net/dsa/slave.c2
-rw-r--r--net/ethernet/eth.c7
-rw-r--r--net/hsr/hsr_framereg.c13
-rw-r--r--net/ieee802154/6lowpan.c796
-rw-r--r--net/ieee802154/6lowpan.h72
-rw-r--r--net/ieee802154/6lowpan_iphc.c802
-rw-r--r--net/ieee802154/Kconfig7
-rw-r--r--net/ieee802154/Makefile1
-rw-r--r--net/ieee802154/dgram.c4
-rw-r--r--net/ieee802154/wpan-class.c2
-rw-r--r--net/ipv4/Makefile4
-rw-r--r--net/ipv4/af_inet.c43
-rw-r--r--net/ipv4/arp.c53
-rw-r--r--net/ipv4/cipso_ipv4.c12
-rw-r--r--net/ipv4/datagram.c2
-rw-r--r--net/ipv4/devinet.c76
-rw-r--r--net/ipv4/fib_frontend.c2
-rw-r--r--net/ipv4/fib_lookup.h2
-rw-r--r--net/ipv4/fib_semantics.c5
-rw-r--r--net/ipv4/gre_demux.c9
-rw-r--r--net/ipv4/gre_offload.c185
-rw-r--r--net/ipv4/icmp.c26
-rw-r--r--net/ipv4/igmp.c84
-rw-r--r--net/ipv4/inet_connection_sock.c2
-rw-r--r--net/ipv4/inet_lro.c173
-rw-r--r--net/ipv4/inetpeer.c11
-rw-r--r--net/ipv4/ip_forward.c7
-rw-r--r--net/ipv4/ip_fragment.c2
-rw-r--r--net/ipv4/ip_gre.c4
-rw-r--r--net/ipv4/ip_options.c42
-rw-r--r--net/ipv4/ip_output.c12
-rw-r--r--net/ipv4/ip_sockglue.c11
-rw-r--r--net/ipv4/ip_tunnel.c150
-rw-r--r--net/ipv4/ip_tunnel_core.c5
-rw-r--r--net/ipv4/ip_vti.c4
-rw-r--r--net/ipv4/ipip.c2
-rw-r--r--net/ipv4/ipmr.c2
-rw-r--r--net/ipv4/netfilter/Kconfig18
-rw-r--r--net/ipv4/netfilter/Makefile1
-rw-r--r--net/ipv4/netfilter/ipt_REJECT.c140
-rw-r--r--net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c6
-rw-r--r--net/ipv4/netfilter/nf_nat_snmp_basic.c15
-rw-r--r--net/ipv4/netfilter/nf_tables_arp.c44
-rw-r--r--net/ipv4/netfilter/nf_tables_ipv4.c60
-rw-r--r--net/ipv4/netfilter/nft_chain_nat_ipv4.c10
-rw-r--r--net/ipv4/netfilter/nft_chain_route_ipv4.c10
-rw-r--r--net/ipv4/ping.c27
-rw-r--r--net/ipv4/proc.c9
-rw-r--r--net/ipv4/raw.c6
-rw-r--r--net/ipv4/route.c3
-rw-r--r--net/ipv4/syncookies.c2
-rw-r--r--net/ipv4/sysctl_net_ipv4.c32
-rw-r--r--net/ipv4/tcp.c71
-rw-r--r--net/ipv4/tcp_input.c6
-rw-r--r--net/ipv4/tcp_ipv4.c5
-rw-r--r--net/ipv4/tcp_metrics.c194
-rw-r--r--net/ipv4/tcp_minisocks.c3
-rw-r--r--net/ipv4/tcp_offload.c18
-rw-r--r--net/ipv4/tcp_output.c141
-rw-r--r--net/ipv4/tcp_probe.c4
-rw-r--r--net/ipv4/tcp_yeah.c20
-rw-r--r--net/ipv4/udp.c8
-rw-r--r--net/ipv4/udp_offload.c143
-rw-r--r--net/ipv4/xfrm4_mode_beet.c2
-rw-r--r--net/ipv4/xfrm4_state.c2
-rw-r--r--net/ipv6/addrconf.c513
-rw-r--r--net/ipv6/af_inet6.c8
-rw-r--r--net/ipv6/ah6.c3
-rw-r--r--net/ipv6/anycast.c11
-rw-r--r--net/ipv6/datagram.c60
-rw-r--r--net/ipv6/esp6.c3
-rw-r--r--net/ipv6/fib6_rules.c2
-rw-r--r--net/ipv6/icmp.c20
-rw-r--r--net/ipv6/inet6_connection_sock.c4
-rw-r--r--net/ipv6/ip6_fib.c6
-rw-r--r--net/ipv6/ip6_flowlabel.c38
-rw-r--r--net/ipv6/ip6_gre.c15
-rw-r--r--net/ipv6/ip6_offload.c53
-rw-r--r--net/ipv6/ip6_output.c66
-rw-r--r--net/ipv6/ip6_tunnel.c17
-rw-r--r--net/ipv6/ip6_vti.c7
-rw-r--r--net/ipv6/ipcomp6.c3
-rw-r--r--net/ipv6/ipv6_sockglue.c19
-rw-r--r--net/ipv6/mcast.c67
-rw-r--r--net/ipv6/mip6.c3
-rw-r--r--net/ipv6/ndisc.c55
-rw-r--r--net/ipv6/netfilter/Kconfig12
-rw-r--r--net/ipv6/netfilter/ip6t_REJECT.c179
-rw-r--r--net/ipv6/netfilter/nf_tables_ipv6.c65
-rw-r--r--net/ipv6/netfilter/nft_chain_nat_ipv6.c10
-rw-r--r--net/ipv6/netfilter/nft_chain_route_ipv6.c10
-rw-r--r--net/ipv6/ping.c16
-rw-r--r--net/ipv6/raw.c12
-rw-r--r--net/ipv6/route.c68
-rw-r--r--net/ipv6/sit.c10
-rw-r--r--net/ipv6/syncookies.c2
-rw-r--r--net/ipv6/sysctl_net_ipv6.c16
-rw-r--r--net/ipv6/tcp_ipv6.c67
-rw-r--r--net/ipv6/tcpv6_offload.c6
-rw-r--r--net/ipv6/tunnel6.c3
-rw-r--r--net/ipv6/udp.c19
-rw-r--r--net/ipv6/xfrm6_mode_ro.c3
-rw-r--r--net/ipv6/xfrm6_tunnel.c3
-rw-r--r--net/ipx/af_ipx.c4
-rw-r--r--net/irda/af_irda.c6
-rw-r--r--net/irda/discovery.c4
-rw-r--r--net/irda/ircomm/ircomm_core.c4
-rw-r--r--net/irda/ircomm/ircomm_event.c4
-rw-r--r--net/irda/ircomm/ircomm_lmp.c4
-rw-r--r--net/irda/ircomm/ircomm_param.c4
-rw-r--r--net/irda/ircomm/ircomm_ttp.c4
-rw-r--r--net/irda/ircomm/ircomm_tty.c4
-rw-r--r--net/irda/ircomm/ircomm_tty_attach.c4
-rw-r--r--net/irda/ircomm/ircomm_tty_ioctl.c4
-rw-r--r--net/irda/irda_device.c4
-rw-r--r--net/irda/irlap.c4
-rw-r--r--net/irda/parameters.c4
-rw-r--r--net/irda/qos.c4
-rw-r--r--net/key/af_key.c29
-rw-r--r--net/l2tp/l2tp_core.c6
-rw-r--r--net/l2tp/l2tp_core.h2
-rw-r--r--net/l2tp/l2tp_ip.c4
-rw-r--r--net/l2tp/l2tp_ip6.c10
-rw-r--r--net/llc/af_llc.c4
-rw-r--r--net/llc/llc_conn.c4
-rw-r--r--net/llc/llc_core.c5
-rw-r--r--net/llc/llc_sap.c4
-rw-r--r--net/mac80211/aes_cmac.c2
-rw-r--r--net/mac80211/aes_cmac.h2
-rw-r--r--net/mac80211/cfg.c208
-rw-r--r--net/mac80211/chan.c208
-rw-r--r--net/mac80211/debugfs.c168
-rw-r--r--net/mac80211/debugfs_netdev.c61
-rw-r--r--net/mac80211/debugfs_sta.c134
-rw-r--r--net/mac80211/driver-ops.h32
-rw-r--r--net/mac80211/ht.c5
-rw-r--r--net/mac80211/ibss.c85
-rw-r--r--net/mac80211/ieee80211_i.h77
-rw-r--r--net/mac80211/iface.c78
-rw-r--r--net/mac80211/key.c122
-rw-r--r--net/mac80211/key.h16
-rw-r--r--net/mac80211/main.c177
-rw-r--r--net/mac80211/mesh.c13
-rw-r--r--net/mac80211/mesh.h6
-rw-r--r--net/mac80211/mesh_hwmp.c91
-rw-r--r--net/mac80211/mesh_pathtbl.c7
-rw-r--r--net/mac80211/mesh_plink.c709
-rw-r--r--net/mac80211/mesh_ps.c3
-rw-r--r--net/mac80211/mesh_sync.c37
-rw-r--r--net/mac80211/mlme.c64
-rw-r--r--net/mac80211/pm.c3
-rw-r--r--net/mac80211/rate.h4
-rw-r--r--net/mac80211/rc80211_minstrel.c11
-rw-r--r--net/mac80211/rc80211_minstrel_ht.c24
-rw-r--r--net/mac80211/rc80211_minstrel_ht_debugfs.c3
-rw-r--r--net/mac80211/rx.c161
-rw-r--r--net/mac80211/scan.c90
-rw-r--r--net/mac80211/sta_info.c346
-rw-r--r--net/mac80211/sta_info.h68
-rw-r--r--net/mac80211/status.c78
-rw-r--r--net/mac80211/tkip.c2
-rw-r--r--net/mac80211/trace.h108
-rw-r--r--net/mac80211/tx.c59
-rw-r--r--net/mac80211/util.c320
-rw-r--r--net/mac80211/vht.c7
-rw-r--r--net/mac80211/wme.c7
-rw-r--r--net/mac80211/wpa.c118
-rw-r--r--net/mac80211/wpa.h2
-rw-r--r--net/mac802154/wpan.c4
-rw-r--r--net/netfilter/Kconfig96
-rw-r--r--net/netfilter/Makefile7
-rw-r--r--net/netfilter/ipset/ip_set_core.c28
-rw-r--r--net/netfilter/ipvs/ip_vs_conn.c2
-rw-r--r--net/netfilter/ipvs/ip_vs_nfct.c3
-rw-r--r--net/netfilter/ipvs/ip_vs_sync.c5
-rw-r--r--net/netfilter/nf_conntrack_core.c15
-rw-r--r--net/netfilter/nf_conntrack_netlink.c12
-rw-r--r--net/netfilter/nf_conntrack_proto.c6
-rw-r--r--net/netfilter/nf_conntrack_proto_dccp.c10
-rw-r--r--net/netfilter/nf_nat_core.c4
-rw-r--r--net/netfilter/nf_nat_proto_common.c10
-rw-r--r--net/netfilter/nf_tables_api.c327
-rw-r--r--net/netfilter/nf_tables_core.c11
-rw-r--r--net/netfilter/nf_tables_inet.c104
-rw-r--r--net/netfilter/nfnetlink_queue_core.c94
-rw-r--r--net/netfilter/nft_compat.c8
-rw-r--r--net/netfilter/nft_ct.c201
-rw-r--r--net/netfilter/nft_log.c2
-rw-r--r--net/netfilter/nft_meta.c157
-rw-r--r--net/netfilter/nft_meta_target.c117
-rw-r--r--net/netfilter/nft_queue.c134
-rw-r--r--net/netfilter/nft_reject.c (renamed from net/ipv4/netfilter/nft_reject_ipv4.c)26
-rw-r--r--net/netfilter/xt_CT.c4
-rw-r--r--net/netfilter/xt_NFQUEUE.c80
-rw-r--r--net/netfilter/xt_cgroup.c71
-rw-r--r--net/netfilter/xt_connmark.c3
-rw-r--r--net/netfilter/xt_ipcomp.c111
-rw-r--r--net/netfilter/xt_l2tp.c354
-rw-r--r--net/netfilter/xt_osf.c3
-rw-r--r--net/netfilter/xt_statistic.c2
-rw-r--r--net/netlabel/netlabel_addrlist.c3
-rw-r--r--net/netlabel/netlabel_addrlist.h3
-rw-r--r--net/netlabel/netlabel_cipso_v4.c3
-rw-r--r--net/netlabel/netlabel_cipso_v4.h3
-rw-r--r--net/netlabel/netlabel_domainhash.c3
-rw-r--r--net/netlabel/netlabel_domainhash.h3
-rw-r--r--net/netlabel/netlabel_kapi.c3
-rw-r--r--net/netlabel/netlabel_mgmt.c3
-rw-r--r--net/netlabel/netlabel_mgmt.h3
-rw-r--r--net/netlabel/netlabel_unlabeled.c3
-rw-r--r--net/netlabel/netlabel_unlabeled.h3
-rw-r--r--net/netlabel/netlabel_user.c3
-rw-r--r--net/netlabel/netlabel_user.h3
-rw-r--r--net/netlink/af_netlink.c41
-rw-r--r--net/netlink/genetlink.c21
-rw-r--r--net/netrom/af_netrom.c4
-rw-r--r--net/nfc/af_nfc.c4
-rw-r--r--net/nfc/core.c11
-rw-r--r--net/nfc/digital_core.c28
-rw-r--r--net/nfc/digital_dep.c54
-rw-r--r--net/nfc/hci/command.c4
-rw-r--r--net/nfc/hci/core.c11
-rw-r--r--net/nfc/hci/hci.h4
-rw-r--r--net/nfc/hci/hcp.c4
-rw-r--r--net/nfc/hci/llc.c4
-rw-r--r--net/nfc/hci/llc.h4
-rw-r--r--net/nfc/hci/llc_nop.c4
-rw-r--r--net/nfc/hci/llc_shdlc.c4
-rw-r--r--net/nfc/llcp.h4
-rw-r--r--net/nfc/llcp_commands.c10
-rw-r--r--net/nfc/llcp_core.c5
-rw-r--r--net/nfc/llcp_sock.c13
-rw-r--r--net/nfc/nci/core.c30
-rw-r--r--net/nfc/nci/data.c3
-rw-r--r--net/nfc/nci/lib.c3
-rw-r--r--net/nfc/nci/ntf.c3
-rw-r--r--net/nfc/nci/rsp.c3
-rw-r--r--net/nfc/netlink.c4
-rw-r--r--net/nfc/nfc.h4
-rw-r--r--net/nfc/rawsock.c4
-rw-r--r--net/openvswitch/actions.c12
-rw-r--r--net/openvswitch/datapath.c231
-rw-r--r--net/openvswitch/datapath.h6
-rw-r--r--net/openvswitch/flow.c96
-rw-r--r--net/openvswitch/flow.h33
-rw-r--r--net/openvswitch/flow_netlink.c66
-rw-r--r--net/openvswitch/flow_netlink.h1
-rw-r--r--net/openvswitch/flow_table.c64
-rw-r--r--net/openvswitch/flow_table.h6
-rw-r--r--net/openvswitch/vport.c18
-rw-r--r--net/openvswitch/vport.h3
-rw-r--r--net/packet/af_packet.c299
-rw-r--r--net/packet/diag.c1
-rw-r--r--net/packet/internal.h3
-rw-r--r--net/phonet/datagram.c6
-rw-r--r--net/rds/bind.c2
-rw-r--r--net/rds/recv.c3
-rw-r--r--net/rds/send.c2
-rw-r--r--net/rfkill/core.c4
-rw-r--r--net/rose/af_rose.c7
-rw-r--r--net/rose/rose_dev.c2
-rw-r--r--net/rxrpc/ar-ack.c21
-rw-r--r--net/rxrpc/ar-output.c4
-rw-r--r--net/sched/Kconfig23
-rw-r--r--net/sched/Makefile2
-rw-r--r--net/sched/act_api.c435
-rw-r--r--net/sched/act_csum.c24
-rw-r--r--net/sched/act_gact.c28
-rw-r--r--net/sched/act_ipt.c33
-rw-r--r--net/sched/act_mirred.c27
-rw-r--r--net/sched/act_nat.c25
-rw-r--r--net/sched/act_pedit.c25
-rw-r--r--net/sched/act_police.c93
-rw-r--r--net/sched/act_simple.c29
-rw-r--r--net/sched/act_skbedit.c27
-rw-r--r--net/sched/cls_api.c130
-rw-r--r--net/sched/cls_basic.c25
-rw-r--r--net/sched/cls_bpf.c17
-rw-r--r--net/sched/cls_cgroup.c127
-rw-r--r--net/sched/cls_flow.c17
-rw-r--r--net/sched/cls_fw.c50
-rw-r--r--net/sched/cls_route.c21
-rw-r--r--net/sched/cls_rsvp.h15
-rw-r--r--net/sched/cls_tcindex.c36
-rw-r--r--net/sched/cls_u32.c38
-rw-r--r--net/sched/em_meta.c159
-rw-r--r--net/sched/sch_api.c10
-rw-r--r--net/sched/sch_cbq.c10
-rw-r--r--net/sched/sch_choke.c9
-rw-r--r--net/sched/sch_dsmark.c39
-rw-r--r--net/sched/sch_fq.c36
-rw-r--r--net/sched/sch_fq_codel.c2
-rw-r--r--net/sched/sch_generic.c6
-rw-r--r--net/sched/sch_gred.c4
-rw-r--r--net/sched/sch_hhf.c745
-rw-r--r--net/sched/sch_htb.c46
-rw-r--r--net/sched/sch_mq.c13
-rw-r--r--net/sched/sch_mqprio.c10
-rw-r--r--net/sched/sch_multiq.c3
-rw-r--r--net/sched/sch_netem.c91
-rw-r--r--net/sched/sch_pie.c555
-rw-r--r--net/sched/sch_sfb.c4
-rw-r--r--net/sched/sch_sfq.c16
-rw-r--r--net/sched/sch_tbf.c29
-rw-r--r--net/sctp/associola.c70
-rw-r--r--net/sctp/auth.c32
-rw-r--r--net/sctp/bind_addr.c5
-rw-r--r--net/sctp/chunk.c9
-rw-r--r--net/sctp/command.c5
-rw-r--r--net/sctp/debug.c5
-rw-r--r--net/sctp/endpointola.c9
-rw-r--r--net/sctp/input.c136
-rw-r--r--net/sctp/inqueue.c5
-rw-r--r--net/sctp/ipv6.c14
-rw-r--r--net/sctp/objcnt.c7
-rw-r--r--net/sctp/output.c24
-rw-r--r--net/sctp/outqueue.c13
-rw-r--r--net/sctp/primitive.c5
-rw-r--r--net/sctp/proc.c25
-rw-r--r--net/sctp/protocol.c15
-rw-r--r--net/sctp/sm_make_chunk.c82
-rw-r--r--net/sctp/sm_sideeffect.c27
-rw-r--r--net/sctp/sm_statefuns.c32
-rw-r--r--net/sctp/sm_statetable.c7
-rw-r--r--net/sctp/socket.c239
-rw-r--r--net/sctp/ssnmap.c5
-rw-r--r--net/sctp/sysctl.c7
-rw-r--r--net/sctp/transport.c5
-rw-r--r--net/sctp/tsnmap.c5
-rw-r--r--net/sctp/ulpevent.c5
-rw-r--r--net/sctp/ulpqueue.c16
-rw-r--r--net/socket.c106
-rw-r--r--net/sunrpc/cache.c2
-rw-r--r--net/sunrpc/xprt.c2
-rw-r--r--net/sunrpc/xprtsock.c2
-rw-r--r--net/tipc/bcast.c8
-rw-r--r--net/tipc/bearer.c342
-rw-r--r--net/tipc/bearer.h56
-rw-r--r--net/tipc/core.c8
-rw-r--r--net/tipc/core.h2
-rw-r--r--net/tipc/discover.c28
-rw-r--r--net/tipc/eth_media.c326
-rw-r--r--net/tipc/ib_media.c319
-rw-r--r--net/tipc/link.c222
-rw-r--r--net/tipc/link.h25
-rw-r--r--net/tipc/name_table.c3
-rw-r--r--net/tipc/node.c15
-rw-r--r--net/tipc/node.h3
-rw-r--r--net/tipc/port.c9
-rw-r--r--net/tipc/server.c2
-rw-r--r--net/tipc/socket.c330
-rw-r--r--net/tipc/subscr.c2
-rw-r--r--net/unix/af_unix.c13
-rw-r--r--net/vmw_vsock/vmci_transport.c4
-rw-r--r--net/wireless/ap.c1
-rw-r--r--net/wireless/chan.c203
-rw-r--r--net/wireless/core.c31
-rw-r--r--net/wireless/core.h24
-rw-r--r--net/wireless/genregdb.awk45
-rw-r--r--net/wireless/ibss.c6
-rw-r--r--net/wireless/mesh.c17
-rw-r--r--net/wireless/mlme.c20
-rw-r--r--net/wireless/nl80211.c766
-rw-r--r--net/wireless/nl80211.h2
-rw-r--r--net/wireless/rdev-ops.h27
-rw-r--r--net/wireless/reg.c831
-rw-r--r--net/wireless/reg.h4
-rw-r--r--net/wireless/scan.c23
-rw-r--r--net/wireless/sme.c15
-rw-r--r--net/wireless/trace.h55
-rw-r--r--net/wireless/util.c34
-rw-r--r--net/wireless/wext-compat.c6
-rw-r--r--net/x25/af_x25.c8
-rw-r--r--net/x25/x25_dev.c10
-rw-r--r--net/x25/x25_facilities.c14
-rw-r--r--net/x25/x25_forward.c5
-rw-r--r--net/x25/x25_in.c4
-rw-r--r--net/x25/x25_link.c6
-rw-r--r--net/x25/x25_subr.c6
-rw-r--r--net/xfrm/xfrm_input.c6
-rw-r--r--net/xfrm/xfrm_policy.c195
-rw-r--r--net/xfrm/xfrm_proc.c2
-rw-r--r--net/xfrm/xfrm_state.c191
-rw-r--r--net/xfrm/xfrm_user.c62
-rw-r--r--tools/net/Makefile23
-rw-r--r--tools/net/bpf_asm.c52
-rw-r--r--tools/net/bpf_dbg.c1404
-rw-r--r--tools/net/bpf_exp.l143
-rw-r--r--tools/net/bpf_exp.y762
1823 files changed, 83389 insertions, 38368 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-net-mesh b/Documentation/ABI/testing/sysfs-class-net-mesh
index 0baa657..4793d3d 100644
--- a/Documentation/ABI/testing/sysfs-class-net-mesh
+++ b/Documentation/ABI/testing/sysfs-class-net-mesh
@@ -68,6 +68,14 @@ Description:
Defines the penalty which will be applied to an
originator message's tq-field on every hop.
+What: /sys/class/net/<mesh_iface>/mesh/isolation_mark
+Date: Nov 2013
+Contact: Antonio Quartulli <antonio@meshcoding.com>
+Description:
+ Defines the isolation mark (and its bitmask) which
+ is used to classify clients as "isolated" by the
+ Extended Isolation feature.
+
What: /sys/class/net/<mesh_iface>/mesh/network_coding
Date: Nov 2012
Contact: Martin Hundeboll <martin@hundeboll.net>
diff --git a/Documentation/cgroups/net_cls.txt b/Documentation/cgroups/net_cls.txt
index 9face6b..ec18234 100644
--- a/Documentation/cgroups/net_cls.txt
+++ b/Documentation/cgroups/net_cls.txt
@@ -6,6 +6,8 @@ tag network packets with a class identifier (classid).
The Traffic Controller (tc) can be used to assign
different priorities to packets from different cgroups.
+Also, Netfilter (iptables) can use this tag to perform
+actions on such packets.
Creating a net_cls cgroups instance creates a net_cls.classid file.
This net_cls.classid value is initialized to 0.
@@ -32,3 +34,6 @@ tc class add dev eth0 parent 10: classid 10:1 htb rate 40mbit
- creating traffic class 10:1
tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup
+
+configuring iptables, basic example:
+iptables -A OUTPUT -m cgroup ! --cgroup 0x100001 -j DROP
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
new file mode 100644
index 0000000..ea4d752
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
@@ -0,0 +1,27 @@
+* Allwinner GMAC ethernet controller
+
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+
+Required properties:
+ - compatible: Should be "allwinner,sun7i-a20-gmac"
+ - clocks: Should contain the GMAC main clock, and tx clock
+ The tx clock type should be "allwinner,sun7i-a20-gmac-clk"
+ - clock-names: Should contain the clock names "stmmaceth",
+ and "allwinner_gmac_tx"
+
+Optional properties:
+- phy-supply: phandle to a regulator if the PHY needs one
+
+Examples:
+
+ gmac: ethernet@01c50000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c50000 0x10000>,
+ <0x01c20164 0x4>;
+ interrupts = <0 85 1>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_gates 49>, <&gmac_tx>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ phy-mode = "mii";
+ };
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
new file mode 100644
index 0000000..ee3723b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -0,0 +1,25 @@
+* Microchip MCP251X stand-alone CAN controller device tree bindings
+
+Required properties:
+ - compatible: Should be one of the following:
+ - "microchip,mcp2510" for MCP2510.
+ - "microchip,mcp2515" for MCP2515.
+ - reg: SPI chip select.
+ - clocks: The clock feeding the CAN controller.
+ - interrupt-parent: The parent interrupt controller.
+ - interrupts: Should contain IRQ line for the CAN controller.
+
+Optional properties:
+ - vdd-supply: Regulator that powers the CAN controller.
+ - xceiver-supply: Regulator that powers the CAN transceiver.
+
+Example:
+ can0: can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk24m>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <13 0x2>;
+ vdd-supply = <&reg5v0>;
+ xceiver-supply = <&reg5v0>;
+ };
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
index bad381f..ca0911a 100644
--- a/Documentation/devicetree/bindings/net/davinci_emac.txt
+++ b/Documentation/devicetree/bindings/net/davinci_emac.txt
@@ -12,8 +12,6 @@ Required properties:
- ti,davinci-ctrl-ram-size: size of control module ram
- ti,davinci-rmii-en: use RMII
- ti,davinci-no-bd-ram: has the emac controller BD RAM
-- phy-handle: Contains a phandle to an Ethernet PHY.
- if not, davinci_emac driver defaults to 100/FULL
- interrupts: interrupt mapping for the davinci emac interrupts sources:
4 sources: <Receive Threshold Interrupt
Receive Interrupt
@@ -21,6 +19,8 @@ Required properties:
Miscellaneous Interrupt>
Optional properties:
+- phy-handle: Contains a phandle to an Ethernet PHY.
+ If absent, davinci_emac driver defaults to 100/FULL.
- local-mac-address : 6 bytes, mac address
Example (enbw_cmc board):
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 85de610..58307d0 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -19,6 +19,7 @@ Optional Properties:
specifications. If neither of these are specified, the default is to
assume clause 22. The compatible list may also contain other
elements.
+- max-speed: Maximum PHY supported speed (10, 100, 1000...)
Example:
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index eba0e5e..9d92d42 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -12,7 +12,6 @@ Required properties:
property
- phy-mode: String, operation mode of the PHY interface.
Supported values are: "mii", "rmii", "gmii", "rgmii".
-- snps,phy-addr phy address to connect to.
- snps,reset-gpio gpio number for phy reset.
- snps,reset-active-low boolean flag to indicate if phy reset is active low.
- snps,reset-delays-us is triplet of delays
@@ -30,6 +29,11 @@ Required properties:
Optional properties:
- mac-address: 6 bytes, mac address
+- resets: Should contain a phandle to the STMMAC reset signal, if any
+- reset-names: Should contain the reset signal name "stmmaceth", if a
+ reset phandle is given
+- max-frame-size: Maximum Transfer Unit (IEEE defined MTU), rather
+ than the maximum frame size.
Examples:
@@ -40,5 +44,6 @@ Examples:
interrupts = <24 23>;
interrupt-names = "macirq", "eth_wake_irq";
mac-address = [000000000000]; /* Filled in by U-Boot */
+ max-frame-size = <3800>;
phy-mode = "gmii";
};
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index 89490beb..58e4904 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -66,11 +66,10 @@ All mesh wide settings can be found in batman's own interface
folder:
# ls /sys/class/net/bat0/mesh/
-# aggregated_ogms gw_bandwidth log_level
-# ap_isolation gw_mode orig_interval
-# bonding gw_sel_class routing_algo
-# bridge_loop_avoidance hop_penalty fragmentation
-
+#aggregated_ogms distributed_arp_table gw_sel_class orig_interval
+#ap_isolation fragmentation hop_penalty routing_algo
+#bonding gw_bandwidth isolation_mark vlan0
+#bridge_loop_avoidance gw_mode log_level
There is a special folder for debugging information:
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 2cdb8b6..5cdb229 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -657,7 +657,8 @@ primary
one slave is preferred over another, e.g., when one slave has
higher throughput than another.
- The primary option is only valid for active-backup mode.
+ The primary option is only valid for active-backup(1),
+ balance-tlb (5) and balance-alb (6) mode.
primary_reselect
@@ -853,6 +854,14 @@ resend_igmp
This option was added for bonding version 3.7.0.
+lp_interval
+
+ Specifies the number of seconds between instances where the bonding
+ driver sends learning packets to each slaves peer switch.
+
+ The valid range is 1 - 0x7fffffff; the default value is 1. This Option
+ has effect only in balance-tlb and balance-alb modes.
+
3. Configuring Bonding Devices
==============================
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt
index 4c07241..f3089d4 100644
--- a/Documentation/networking/can.txt
+++ b/Documentation/networking/can.txt
@@ -2,21 +2,20 @@
can.txt
-Readme file for the Controller Area Network Protocol Family (aka Socket CAN)
+Readme file for the Controller Area Network Protocol Family (aka SocketCAN)
This file contains
- 1 Overview / What is Socket CAN
+ 1 Overview / What is SocketCAN
2 Motivation / Why using the socket API
- 3 Socket CAN concept
+ 3 SocketCAN concept
3.1 receive lists
3.2 local loopback of sent frames
- 3.3 network security issues (capabilities)
- 3.4 network problem notifications
+ 3.3 network problem notifications
- 4 How to use Socket CAN
+ 4 How to use SocketCAN
4.1 RAW protocol sockets with can_filters (SOCK_RAW)
4.1.1 RAW socket option CAN_RAW_FILTER
4.1.2 RAW socket option CAN_RAW_ERR_FILTER
@@ -34,7 +33,7 @@ This file contains
4.3 connected transport protocols (SOCK_SEQPACKET)
4.4 unconnected transport protocols (SOCK_DGRAM)
- 5 Socket CAN core module
+ 5 SocketCAN core module
5.1 can.ko module params
5.2 procfs content
5.3 writing own CAN protocol modules
@@ -51,20 +50,20 @@ This file contains
6.6 CAN FD (flexible data rate) driver support
6.7 supported CAN hardware
- 7 Socket CAN resources
+ 7 SocketCAN resources
8 Credits
============================================================================
-1. Overview / What is Socket CAN
+1. Overview / What is SocketCAN
--------------------------------
The socketcan package is an implementation of CAN protocols
(Controller Area Network) for Linux. CAN is a networking technology
which has widespread use in automation, embedded devices, and
automotive fields. While there have been other CAN implementations
-for Linux based on character devices, Socket CAN uses the Berkeley
+for Linux based on character devices, SocketCAN uses the Berkeley
socket API, the Linux network stack and implements the CAN device
drivers as network interfaces. The CAN socket API has been designed
as similar as possible to the TCP/IP protocols to allow programmers,
@@ -74,7 +73,7 @@ sockets.
2. Motivation / Why using the socket API
----------------------------------------
-There have been CAN implementations for Linux before Socket CAN so the
+There have been CAN implementations for Linux before SocketCAN so the
question arises, why we have started another project. Most existing
implementations come as a device driver for some CAN hardware, they
are based on character devices and provide comparatively little
@@ -89,10 +88,10 @@ the CAN controller requires employment of another device driver and
often the need for adaption of large parts of the application to the
new driver's API.
-Socket CAN was designed to overcome all of these limitations. A new
+SocketCAN was designed to overcome all of these limitations. A new
protocol family has been implemented which provides a socket interface
to user space applications and which builds upon the Linux network
-layer, so to use all of the provided queueing functionality. A device
+layer, enabling use all of the provided queueing functionality. A device
driver for CAN controller hardware registers itself with the Linux
network layer as a network device, so that CAN frames from the
controller can be passed up to the network layer and on to the CAN
@@ -146,15 +145,15 @@ solution for a couple of reasons:
providing an API for device drivers to register with. However, then
it would be no more difficult, or may be even easier, to use the
networking framework provided by the Linux kernel, and this is what
- Socket CAN does.
+ SocketCAN does.
The use of the networking framework of the Linux kernel is just the
natural and most appropriate way to implement CAN for Linux.
-3. Socket CAN concept
+3. SocketCAN concept
---------------------
- As described in chapter 2 it is the main goal of Socket CAN to
+ As described in chapter 2 it is the main goal of SocketCAN to
provide a socket interface to user space applications which builds
upon the Linux network layer. In contrast to the commonly known
TCP/IP and ethernet networking, the CAN bus is a broadcast-only(!)
@@ -168,11 +167,11 @@ solution for a couple of reasons:
The network transparent access of multiple applications leads to the
problem that different applications may be interested in the same
- CAN-IDs from the same CAN network interface. The Socket CAN core
+ CAN-IDs from the same CAN network interface. The SocketCAN core
module - which implements the protocol family CAN - provides several
high efficient receive lists for this reason. If e.g. a user space
application opens a CAN RAW socket, the raw protocol module itself
- requests the (range of) CAN-IDs from the Socket CAN core that are
+ requests the (range of) CAN-IDs from the SocketCAN core that are
requested by the user. The subscription and unsubscription of
CAN-IDs can be done for specific CAN interfaces or for all(!) known
CAN interfaces with the can_rx_(un)register() functions provided to
@@ -217,21 +216,7 @@ solution for a couple of reasons:
* = you really like to have this when you're running analyser tools
like 'candump' or 'cansniffer' on the (same) node.
- 3.3 network security issues (capabilities)
-
- The Controller Area Network is a local field bus transmitting only
- broadcast messages without any routing and security concepts.
- In the majority of cases the user application has to deal with
- raw CAN frames. Therefore it might be reasonable NOT to restrict
- the CAN access only to the user root, as known from other networks.
- Since the currently implemented CAN_RAW and CAN_BCM sockets can only
- send and receive frames to/from CAN interfaces it does not affect
- security of others networks to allow all users to access the CAN.
- To enable non-root users to access CAN_RAW and CAN_BCM protocol
- sockets the Kconfig options CAN_RAW_USER and/or CAN_BCM_USER may be
- selected at kernel compile time.
-
- 3.4 network problem notifications
+ 3.3 network problem notifications
The use of the CAN bus may lead to several problems on the physical
and media access control layer. Detecting and logging of these lower
@@ -251,11 +236,11 @@ solution for a couple of reasons:
by default. The format of the CAN error message frame is briefly
described in the Linux header file "include/linux/can/error.h".
-4. How to use Socket CAN
+4. How to use SocketCAN
------------------------
Like TCP/IP, you first need to open a socket for communicating over a
- CAN network. Since Socket CAN implements a new protocol family, you
+ CAN network. Since SocketCAN implements a new protocol family, you
need to pass PF_CAN as the first argument to the socket(2) system
call. Currently, there are two CAN protocols to choose from, the raw
socket protocol and the broadcast manager (BCM). So to open a socket,
@@ -286,8 +271,8 @@ solution for a couple of reasons:
};
The alignment of the (linear) payload data[] to a 64bit boundary
- allows the user to define own structs and unions to easily access the
- CAN payload. There is no given byteorder on the CAN bus by
+ allows the user to define their own structs and unions to easily access
+ the CAN payload. There is no given byteorder on the CAN bus by
default. A read(2) system call on a CAN_RAW socket transfers a
struct can_frame to the user space.
@@ -479,7 +464,7 @@ solution for a couple of reasons:
setsockopt(s, SOL_CAN_RAW, CAN_RAW_FILTER, NULL, 0);
- To set the filters to zero filters is quite obsolete as not read
+ To set the filters to zero filters is quite obsolete as to not read
data causes the raw socket to discard the received CAN frames. But
having this 'send only' use-case we may remove the receive list in the
Kernel to save a little (really a very little!) CPU usage.
@@ -814,17 +799,17 @@ solution for a couple of reasons:
4.4 unconnected transport protocols (SOCK_DGRAM)
-5. Socket CAN core module
+5. SocketCAN core module
-------------------------
- The Socket CAN core module implements the protocol family
+ The SocketCAN core module implements the protocol family
PF_CAN. CAN protocol modules are loaded by the core module at
runtime. The core module provides an interface for CAN protocol
modules to subscribe needed CAN IDs (see chapter 3.1).
5.1 can.ko module params
- - stats_timer: To calculate the Socket CAN core statistics
+ - stats_timer: To calculate the SocketCAN core statistics
(e.g. current/maximum frames per second) this 1 second timer is
invoked at can.ko module start time by default. This timer can be
disabled by using stattimer=0 on the module commandline.
@@ -833,7 +818,7 @@ solution for a couple of reasons:
5.2 procfs content
- As described in chapter 3.1 the Socket CAN core uses several filter
+ As described in chapter 3.1 the SocketCAN core uses several filter
lists to deliver received CAN frames to CAN protocol modules. These
receive lists, their filters and the count of filter matches can be
checked in the appropriate receive list. All entries contain the
@@ -860,15 +845,15 @@ solution for a couple of reasons:
Additional procfs files in /proc/net/can
- stats - Socket CAN core statistics (rx/tx frames, match ratios, ...)
+ stats - SocketCAN core statistics (rx/tx frames, match ratios, ...)
reset_stats - manual statistic reset
- version - prints the Socket CAN core version and the ABI version
+ version - prints the SocketCAN core version and the ABI version
5.3 writing own CAN protocol modules
To implement a new protocol in the protocol family PF_CAN a new
protocol has to be defined in include/linux/can.h .
- The prototypes and definitions to use the Socket CAN core can be
+ The prototypes and definitions to use the SocketCAN core can be
accessed by including include/linux/can/core.h .
In addition to functions that register the CAN protocol and the
CAN device notifier chain there are functions to subscribe CAN
@@ -1105,7 +1090,7 @@ solution for a couple of reasons:
$ ip link set canX up type can bitrate 125000
- A device may enter the "bus-off" state if too much errors occurred on
+ A device may enter the "bus-off" state if too many errors occurred on
the CAN bus. Then no more messages are received or sent. An automatic
bus-off recovery can be enabled by setting the "restart-ms" to a
non-zero value, e.g.:
@@ -1125,7 +1110,7 @@ solution for a couple of reasons:
CAN FD capable CAN controllers support two different bitrates for the
arbitration phase and the payload phase of the CAN FD frame. Therefore a
- second bittiming has to be specified in order to enable the CAN FD bitrate.
+ second bit timing has to be specified in order to enable the CAN FD bitrate.
Additionally CAN FD capable CAN controllers support up to 64 bytes of
payload. The representation of this length in can_frame.can_dlc and
@@ -1150,21 +1135,16 @@ solution for a couple of reasons:
6.7 Supported CAN hardware
Please check the "Kconfig" file in "drivers/net/can" to get an actual
- list of the support CAN hardware. On the Socket CAN project website
+ list of the support CAN hardware. On the SocketCAN project website
(see chapter 7) there might be further drivers available, also for
older kernel versions.
-7. Socket CAN resources
+7. SocketCAN resources
-----------------------
- You can find further resources for Socket CAN like user space tools,
- support for old kernel versions, more drivers, mailing lists, etc.
- at the BerliOS OSS project website for Socket CAN:
-
- http://developer.berlios.de/projects/socketcan
-
- If you have questions, bug fixes, etc., don't hesitate to post them to
- the Socketcan-Users mailing list. But please search the archives first.
+ The Linux CAN / SocketCAN project ressources (project site / mailing list)
+ are referenced in the MAINTAINERS file in the Linux source tree.
+ Search for CAN NETWORK [LAYERS|DRIVERS].
8. Credits
----------
diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt
index cdb3e40..a06b48d 100644
--- a/Documentation/networking/filter.txt
+++ b/Documentation/networking/filter.txt
@@ -1,49 +1,563 @@
-filter.txt: Linux Socket Filtering
-Written by: Jay Schulist <jschlst@samba.org>
+Linux Socket Filtering aka Berkeley Packet Filter (BPF)
+=======================================================
Introduction
-============
-
- Linux Socket Filtering is derived from the Berkeley
-Packet Filter. There are some distinct differences between
-the BSD and Linux Kernel Filtering.
-
-Linux Socket Filtering (LSF) allows a user-space program to
-attach a filter onto any socket and allow or disallow certain
-types of data to come through the socket. LSF follows exactly
-the same filter code structure as the BSD Berkeley Packet Filter
-(BPF), so referring to the BSD bpf.4 manpage is very helpful in
-creating filters.
-
-LSF is much simpler than BPF. One does not have to worry about
-devices or anything like that. You simply create your filter
-code, send it to the kernel via the SO_ATTACH_FILTER option and
-if your filter code passes the kernel check on it, you then
-immediately begin filtering data on that socket.
-
-You can also detach filters from your socket via the
-SO_DETACH_FILTER option. This will probably not be used much
-since when you close a socket that has a filter on it the
-filter is automagically removed. The other less common case
-may be adding a different filter on the same socket where you had another
-filter that is still running: the kernel takes care of removing
-the old one and placing your new one in its place, assuming your
-filter has passed the checks, otherwise if it fails the old filter
-will remain on that socket.
-
-SO_LOCK_FILTER option allows to lock the filter attached to a
-socket. Once set, a filter cannot be removed or changed. This allows
-one process to setup a socket, attach a filter, lock it then drop
-privileges and be assured that the filter will be kept until the
-socket is closed.
-
-Examples
-========
-
-Ioctls-
-setsockopt(sockfd, SOL_SOCKET, SO_ATTACH_FILTER, &Filter, sizeof(Filter));
-setsockopt(sockfd, SOL_SOCKET, SO_DETACH_FILTER, &value, sizeof(value));
-setsockopt(sockfd, SOL_SOCKET, SO_LOCK_FILTER, &value, sizeof(value));
-
-See the BSD bpf.4 manpage and the BSD Packet Filter paper written by
-Steven McCanne and Van Jacobson of Lawrence Berkeley Laboratory.
+------------
+
+Linux Socket Filtering (LSF) is derived from the Berkeley Packet Filter.
+Though there are some distinct differences between the BSD and Linux
+Kernel filtering, but when we speak of BPF or LSF in Linux context, we
+mean the very same mechanism of filtering in the Linux kernel.
+
+BPF allows a user-space program to attach a filter onto any socket and
+allow or disallow certain types of data to come through the socket. LSF
+follows exactly the same filter code structure as BSD's BPF, so referring
+to the BSD bpf.4 manpage is very helpful in creating filters.
+
+On Linux, BPF is much simpler than on BSD. One does not have to worry
+about devices or anything like that. You simply create your filter code,
+send it to the kernel via the SO_ATTACH_FILTER option and if your filter
+code passes the kernel check on it, you then immediately begin filtering
+data on that socket.
+
+You can also detach filters from your socket via the SO_DETACH_FILTER
+option. This will probably not be used much since when you close a socket
+that has a filter on it the filter is automagically removed. The other
+less common case may be adding a different filter on the same socket where
+you had another filter that is still running: the kernel takes care of
+removing the old one and placing your new one in its place, assuming your
+filter has passed the checks, otherwise if it fails the old filter will
+remain on that socket.
+
+SO_LOCK_FILTER option allows to lock the filter attached to a socket. Once
+set, a filter cannot be removed or changed. This allows one process to
+setup a socket, attach a filter, lock it then drop privileges and be
+assured that the filter will be kept until the socket is closed.
+
+The biggest user of this construct might be libpcap. Issuing a high-level
+filter command like `tcpdump -i em1 port 22` passes through the libpcap
+internal compiler that generates a structure that can eventually be loaded
+via SO_ATTACH_FILTER to the kernel. `tcpdump -i em1 port 22 -ddd`
+displays what is being placed into this structure.
+
+Although we were only speaking about sockets here, BPF in Linux is used
+in many more places. There's xt_bpf for netfilter, cls_bpf in the kernel
+qdisc layer, SECCOMP-BPF (SECure COMPuting [1]), and lots of other places
+such as team driver, PTP code, etc where BPF is being used.
+
+ [1] Documentation/prctl/seccomp_filter.txt
+
+Original BPF paper:
+
+Steven McCanne and Van Jacobson. 1993. The BSD packet filter: a new
+architecture for user-level packet capture. In Proceedings of the
+USENIX Winter 1993 Conference Proceedings on USENIX Winter 1993
+Conference Proceedings (USENIX'93). USENIX Association, Berkeley,
+CA, USA, 2-2. [http://www.tcpdump.org/papers/bpf-usenix93.pdf]
+
+Structure
+---------
+
+User space applications include <linux/filter.h> which contains the
+following relevant structures:
+
+struct sock_filter { /* Filter block */
+ __u16 code; /* Actual filter code */
+ __u8 jt; /* Jump true */
+ __u8 jf; /* Jump false */
+ __u32 k; /* Generic multiuse field */
+};
+
+Such a structure is assembled as an array of 4-tuples, that contains
+a code, jt, jf and k value. jt and jf are jump offsets and k a generic
+value to be used for a provided code.
+
+struct sock_fprog { /* Required for SO_ATTACH_FILTER. */
+ unsigned short len; /* Number of filter blocks */
+ struct sock_filter __user *filter;
+};
+
+For socket filtering, a pointer to this structure (as shown in
+follow-up example) is being passed to the kernel through setsockopt(2).
+
+Example
+-------
+
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <arpa/inet.h>
+#include <linux/if_ether.h>
+/* ... */
+
+/* From the example above: tcpdump -i em1 port 22 -dd */
+struct sock_filter code[] = {
+ { 0x28, 0, 0, 0x0000000c },
+ { 0x15, 0, 8, 0x000086dd },
+ { 0x30, 0, 0, 0x00000014 },
+ { 0x15, 2, 0, 0x00000084 },
+ { 0x15, 1, 0, 0x00000006 },
+ { 0x15, 0, 17, 0x00000011 },
+ { 0x28, 0, 0, 0x00000036 },
+ { 0x15, 14, 0, 0x00000016 },
+ { 0x28, 0, 0, 0x00000038 },
+ { 0x15, 12, 13, 0x00000016 },
+ { 0x15, 0, 12, 0x00000800 },
+ { 0x30, 0, 0, 0x00000017 },
+ { 0x15, 2, 0, 0x00000084 },
+ { 0x15, 1, 0, 0x00000006 },
+ { 0x15, 0, 8, 0x00000011 },
+ { 0x28, 0, 0, 0x00000014 },
+ { 0x45, 6, 0, 0x00001fff },
+ { 0xb1, 0, 0, 0x0000000e },
+ { 0x48, 0, 0, 0x0000000e },
+ { 0x15, 2, 0, 0x00000016 },
+ { 0x48, 0, 0, 0x00000010 },
+ { 0x15, 0, 1, 0x00000016 },
+ { 0x06, 0, 0, 0x0000ffff },
+ { 0x06, 0, 0, 0x00000000 },
+};
+
+struct sock_fprog bpf = {
+ .len = ARRAY_SIZE(code),
+ .filter = code,
+};
+
+sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL));
+if (sock < 0)
+ /* ... bail out ... */
+
+ret = setsockopt(sock, SOL_SOCKET, SO_ATTACH_FILTER, &bpf, sizeof(bpf));
+if (ret < 0)
+ /* ... bail out ... */
+
+/* ... */
+close(sock);
+
+The above example code attaches a socket filter for a PF_PACKET socket
+in order to let all IPv4/IPv6 packets with port 22 pass. The rest will
+be dropped for this socket.
+
+The setsockopt(2) call to SO_DETACH_FILTER doesn't need any arguments
+and SO_LOCK_FILTER for preventing the filter to be detached, takes an
+integer value with 0 or 1.
+
+Note that socket filters are not restricted to PF_PACKET sockets only,
+but can also be used on other socket families.
+
+Summary of system calls:
+
+ * setsockopt(sockfd, SOL_SOCKET, SO_ATTACH_FILTER, &val, sizeof(val));
+ * setsockopt(sockfd, SOL_SOCKET, SO_DETACH_FILTER, &val, sizeof(val));
+ * setsockopt(sockfd, SOL_SOCKET, SO_LOCK_FILTER, &val, sizeof(val));
+
+Normally, most use cases for socket filtering on packet sockets will be
+covered by libpcap in high-level syntax, so as an application developer
+you should stick to that. libpcap wraps its own layer around all that.
+
+Unless i) using/linking to libpcap is not an option, ii) the required BPF
+filters use Linux extensions that are not supported by libpcap's compiler,
+iii) a filter might be more complex and not cleanly implementable with
+libpcap's compiler, or iv) particular filter codes should be optimized
+differently than libpcap's internal compiler does; then in such cases
+writing such a filter "by hand" can be of an alternative. For example,
+xt_bpf and cls_bpf users might have requirements that could result in
+more complex filter code, or one that cannot be expressed with libpcap
+(e.g. different return codes for various code paths). Moreover, BPF JIT
+implementors may wish to manually write test cases and thus need low-level
+access to BPF code as well.
+
+BPF engine and instruction set
+------------------------------
+
+Under tools/net/ there's a small helper tool called bpf_asm which can
+be used to write low-level filters for example scenarios mentioned in the
+previous section. Asm-like syntax mentioned here has been implemented in
+bpf_asm and will be used for further explanations (instead of dealing with
+less readable opcodes directly, principles are the same). The syntax is
+closely modelled after Steven McCanne's and Van Jacobson's BPF paper.
+
+The BPF architecture consists of the following basic elements:
+
+ Element Description
+
+ A 32 bit wide accumulator
+ X 32 bit wide X register
+ M[] 16 x 32 bit wide misc registers aka "scratch memory
+ store", addressable from 0 to 15
+
+A program, that is translated by bpf_asm into "opcodes" is an array that
+consists of the following elements (as already mentioned):
+
+ op:16, jt:8, jf:8, k:32
+
+The element op is a 16 bit wide opcode that has a particular instruction
+encoded. jt and jf are two 8 bit wide jump targets, one for condition
+"jump if true", the other one "jump if false". Eventually, element k
+contains a miscellaneous argument that can be interpreted in different
+ways depending on the given instruction in op.
+
+The instruction set consists of load, store, branch, alu, miscellaneous
+and return instructions that are also represented in bpf_asm syntax. This
+table lists all bpf_asm instructions available resp. what their underlying
+opcodes as defined in linux/filter.h stand for:
+
+ Instruction Addressing mode Description
+
+ ld 1, 2, 3, 4, 10 Load word into A
+ ldi 4 Load word into A
+ ldh 1, 2 Load half-word into A
+ ldb 1, 2 Load byte into A
+ ldx 3, 4, 5, 10 Load word into X
+ ldxi 4 Load word into X
+ ldxb 5 Load byte into X
+
+ st 3 Store A into M[]
+ stx 3 Store X into M[]
+
+ jmp 6 Jump to label
+ ja 6 Jump to label
+ jeq 7, 8 Jump on k == A
+ jneq 8 Jump on k != A
+ jne 8 Jump on k != A
+ jlt 8 Jump on k < A
+ jle 8 Jump on k <= A
+ jgt 7, 8 Jump on k > A
+ jge 7, 8 Jump on k >= A
+ jset 7, 8 Jump on k & A
+
+ add 0, 4 A + <x>
+ sub 0, 4 A - <x>
+ mul 0, 4 A * <x>
+ div 0, 4 A / <x>
+ mod 0, 4 A % <x>
+ neg 0, 4 !A
+ and 0, 4 A & <x>
+ or 0, 4 A | <x>
+ xor 0, 4 A ^ <x>
+ lsh 0, 4 A << <x>
+ rsh 0, 4 A >> <x>
+
+ tax Copy A into X
+ txa Copy X into A
+
+ ret 4, 9 Return
+
+The next table shows addressing formats from the 2nd column:
+
+ Addressing mode Syntax Description
+
+ 0 x/%x Register X
+ 1 [k] BHW at byte offset k in the packet
+ 2 [x + k] BHW at the offset X + k in the packet
+ 3 M[k] Word at offset k in M[]
+ 4 #k Literal value stored in k
+ 5 4*([k]&0xf) Lower nibble * 4 at byte offset k in the packet
+ 6 L Jump label L
+ 7 #k,Lt,Lf Jump to Lt if true, otherwise jump to Lf
+ 8 #k,Lt Jump to Lt if predicate is true
+ 9 a/%a Accumulator A
+ 10 extension BPF extension
+
+The Linux kernel also has a couple of BPF extensions that are used along
+with the class of load instructions by "overloading" the k argument with
+a negative offset + a particular extension offset. The result of such BPF
+extensions are loaded into A.
+
+Possible BPF extensions are shown in the following table:
+
+ Extension Description
+
+ len skb->len
+ proto skb->protocol
+ type skb->pkt_type
+ poff Payload start offset
+ ifidx skb->dev->ifindex
+ nla Netlink attribute of type X with offset A
+ nlan Nested Netlink attribute of type X with offset A
+ mark skb->mark
+ queue skb->queue_mapping
+ hatype skb->dev->type
+ rxhash skb->rxhash
+ cpu raw_smp_processor_id()
+ vlan_tci vlan_tx_tag_get(skb)
+ vlan_pr vlan_tx_tag_present(skb)
+
+These extensions can also be prefixed with '#'.
+Examples for low-level BPF:
+
+** ARP packets:
+
+ ldh [12]
+ jne #0x806, drop
+ ret #-1
+ drop: ret #0
+
+** IPv4 TCP packets:
+
+ ldh [12]
+ jne #0x800, drop
+ ldb [23]
+ jneq #6, drop
+ ret #-1
+ drop: ret #0
+
+** (Accelerated) VLAN w/ id 10:
+
+ ld vlan_tci
+ jneq #10, drop
+ ret #-1
+ drop: ret #0
+
+** SECCOMP filter example:
+
+ ld [4] /* offsetof(struct seccomp_data, arch) */
+ jne #0xc000003e, bad /* AUDIT_ARCH_X86_64 */
+ ld [0] /* offsetof(struct seccomp_data, nr) */
+ jeq #15, good /* __NR_rt_sigreturn */
+ jeq #231, good /* __NR_exit_group */
+ jeq #60, good /* __NR_exit */
+ jeq #0, good /* __NR_read */
+ jeq #1, good /* __NR_write */
+ jeq #5, good /* __NR_fstat */
+ jeq #9, good /* __NR_mmap */
+ jeq #14, good /* __NR_rt_sigprocmask */
+ jeq #13, good /* __NR_rt_sigaction */
+ jeq #35, good /* __NR_nanosleep */
+ bad: ret #0 /* SECCOMP_RET_KILL */
+ good: ret #0x7fff0000 /* SECCOMP_RET_ALLOW */
+
+The above example code can be placed into a file (here called "foo"), and
+then be passed to the bpf_asm tool for generating opcodes, output that xt_bpf
+and cls_bpf understands and can directly be loaded with. Example with above
+ARP code:
+
+$ ./bpf_asm foo
+4,40 0 0 12,21 0 1 2054,6 0 0 4294967295,6 0 0 0,
+
+In copy and paste C-like output:
+
+$ ./bpf_asm -c foo
+{ 0x28, 0, 0, 0x0000000c },
+{ 0x15, 0, 1, 0x00000806 },
+{ 0x06, 0, 0, 0xffffffff },
+{ 0x06, 0, 0, 0000000000 },
+
+In particular, as usage with xt_bpf or cls_bpf can result in more complex BPF
+filters that might not be obvious at first, it's good to test filters before
+attaching to a live system. For that purpose, there's a small tool called
+bpf_dbg under tools/net/ in the kernel source directory. This debugger allows
+for testing BPF filters against given pcap files, single stepping through the
+BPF code on the pcap's packets and to do BPF machine register dumps.
+
+Starting bpf_dbg is trivial and just requires issuing:
+
+# ./bpf_dbg
+
+In case input and output do not equal stdin/stdout, bpf_dbg takes an
+alternative stdin source as a first argument, and an alternative stdout
+sink as a second one, e.g. `./bpf_dbg test_in.txt test_out.txt`.
+
+Other than that, a particular libreadline configuration can be set via
+file "~/.bpf_dbg_init" and the command history is stored in the file
+"~/.bpf_dbg_history".
+
+Interaction in bpf_dbg happens through a shell that also has auto-completion
+support (follow-up example commands starting with '>' denote bpf_dbg shell).
+The usual workflow would be to ...
+
+> load bpf 6,40 0 0 12,21 0 3 2048,48 0 0 23,21 0 1 1,6 0 0 65535,6 0 0 0
+ Loads a BPF filter from standard output of bpf_asm, or transformed via
+ e.g. `tcpdump -iem1 -ddd port 22 | tr '\n' ','`. Note that for JIT
+ debugging (next section), this command creates a temporary socket and
+ loads the BPF code into the kernel. Thus, this will also be useful for
+ JIT developers.
+
+> load pcap foo.pcap
+ Loads standard tcpdump pcap file.
+
+> run [<n>]
+bpf passes:1 fails:9
+ Runs through all packets from a pcap to account how many passes and fails
+ the filter will generate. A limit of packets to traverse can be given.
+
+> disassemble
+l0: ldh [12]
+l1: jeq #0x800, l2, l5
+l2: ldb [23]
+l3: jeq #0x1, l4, l5
+l4: ret #0xffff
+l5: ret #0
+ Prints out BPF code disassembly.
+
+> dump
+/* { op, jt, jf, k }, */
+{ 0x28, 0, 0, 0x0000000c },
+{ 0x15, 0, 3, 0x00000800 },
+{ 0x30, 0, 0, 0x00000017 },
+{ 0x15, 0, 1, 0x00000001 },
+{ 0x06, 0, 0, 0x0000ffff },
+{ 0x06, 0, 0, 0000000000 },
+ Prints out C-style BPF code dump.
+
+> breakpoint 0
+breakpoint at: l0: ldh [12]
+> breakpoint 1
+breakpoint at: l1: jeq #0x800, l2, l5
+ ...
+ Sets breakpoints at particular BPF instructions. Issuing a `run` command
+ will walk through the pcap file continuing from the current packet and
+ break when a breakpoint is being hit (another `run` will continue from
+ the currently active breakpoint executing next instructions):
+
+ > run
+ -- register dump --
+ pc: [0] <-- program counter
+ code: [40] jt[0] jf[0] k[12] <-- plain BPF code of current instruction
+ curr: l0: ldh [12] <-- disassembly of current instruction
+ A: [00000000][0] <-- content of A (hex, decimal)
+ X: [00000000][0] <-- content of X (hex, decimal)
+ M[0,15]: [00000000][0] <-- folded content of M (hex, decimal)
+ -- packet dump -- <-- Current packet from pcap (hex)
+ len: 42
+ 0: 00 19 cb 55 55 a4 00 14 a4 43 78 69 08 06 00 01
+ 16: 08 00 06 04 00 01 00 14 a4 43 78 69 0a 3b 01 26
+ 32: 00 00 00 00 00 00 0a 3b 01 01
+ (breakpoint)
+ >
+
+> breakpoint
+breakpoints: 0 1
+ Prints currently set breakpoints.
+
+> step [-<n>, +<n>]
+ Performs single stepping through the BPF program from the current pc
+ offset. Thus, on each step invocation, above register dump is issued.
+ This can go forwards and backwards in time, a plain `step` will break
+ on the next BPF instruction, thus +1. (No `run` needs to be issued here.)
+
+> select <n>
+ Selects a given packet from the pcap file to continue from. Thus, on
+ the next `run` or `step`, the BPF program is being evaluated against
+ the user pre-selected packet. Numbering starts just as in Wireshark
+ with index 1.
+
+> quit
+#
+ Exits bpf_dbg.
+
+JIT compiler
+------------
+
+The Linux kernel has a built-in BPF JIT compiler for x86_64, SPARC, PowerPC,
+ARM and s390 and can be enabled through CONFIG_BPF_JIT. The JIT compiler is
+transparently invoked for each attached filter from user space or for internal
+kernel users if it has been previously enabled by root:
+
+ echo 1 > /proc/sys/net/core/bpf_jit_enable
+
+For JIT developers, doing audits etc, each compile run can output the generated
+opcode image into the kernel log via:
+
+ echo 2 > /proc/sys/net/core/bpf_jit_enable
+
+Example output from dmesg:
+
+[ 3389.935842] flen=6 proglen=70 pass=3 image=ffffffffa0069c8f
+[ 3389.935847] JIT code: 00000000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 68
+[ 3389.935849] JIT code: 00000010: 44 2b 4f 6c 4c 8b 87 d8 00 00 00 be 0c 00 00 00
+[ 3389.935850] JIT code: 00000020: e8 1d 94 ff e0 3d 00 08 00 00 75 16 be 17 00 00
+[ 3389.935851] JIT code: 00000030: 00 e8 28 94 ff e0 83 f8 01 75 07 b8 ff ff 00 00
+[ 3389.935852] JIT code: 00000040: eb 02 31 c0 c9 c3
+
+In the kernel source tree under tools/net/, there's bpf_jit_disasm for
+generating disassembly out of the kernel log's hexdump:
+
+# ./bpf_jit_disasm
+70 bytes emitted from JIT compiler (pass:3, flen:6)
+ffffffffa0069c8f + <x>:
+ 0: push %rbp
+ 1: mov %rsp,%rbp
+ 4: sub $0x60,%rsp
+ 8: mov %rbx,-0x8(%rbp)
+ c: mov 0x68(%rdi),%r9d
+ 10: sub 0x6c(%rdi),%r9d
+ 14: mov 0xd8(%rdi),%r8
+ 1b: mov $0xc,%esi
+ 20: callq 0xffffffffe0ff9442
+ 25: cmp $0x800,%eax
+ 2a: jne 0x0000000000000042
+ 2c: mov $0x17,%esi
+ 31: callq 0xffffffffe0ff945e
+ 36: cmp $0x1,%eax
+ 39: jne 0x0000000000000042
+ 3b: mov $0xffff,%eax
+ 40: jmp 0x0000000000000044
+ 42: xor %eax,%eax
+ 44: leaveq
+ 45: retq
+
+Issuing option `-o` will "annotate" opcodes to resulting assembler
+instructions, which can be very useful for JIT developers:
+
+# ./bpf_jit_disasm -o
+70 bytes emitted from JIT compiler (pass:3, flen:6)
+ffffffffa0069c8f + <x>:
+ 0: push %rbp
+ 55
+ 1: mov %rsp,%rbp
+ 48 89 e5
+ 4: sub $0x60,%rsp
+ 48 83 ec 60
+ 8: mov %rbx,-0x8(%rbp)
+ 48 89 5d f8
+ c: mov 0x68(%rdi),%r9d
+ 44 8b 4f 68
+ 10: sub 0x6c(%rdi),%r9d
+ 44 2b 4f 6c
+ 14: mov 0xd8(%rdi),%r8
+ 4c 8b 87 d8 00 00 00
+ 1b: mov $0xc,%esi
+ be 0c 00 00 00
+ 20: callq 0xffffffffe0ff9442
+ e8 1d 94 ff e0
+ 25: cmp $0x800,%eax
+ 3d 00 08 00 00
+ 2a: jne 0x0000000000000042
+ 75 16
+ 2c: mov $0x17,%esi
+ be 17 00 00 00
+ 31: callq 0xffffffffe0ff945e
+ e8 28 94 ff e0
+ 36: cmp $0x1,%eax
+ 83 f8 01
+ 39: jne 0x0000000000000042
+ 75 07
+ 3b: mov $0xffff,%eax
+ b8 ff ff 00 00
+ 40: jmp 0x0000000000000044
+ eb 02
+ 42: xor %eax,%eax
+ 31 c0
+ 44: leaveq
+ c9
+ 45: retq
+ c3
+
+For BPF JIT developers, bpf_jit_disasm, bpf_asm and bpf_dbg provides a useful
+toolchain for developing and testing the kernel's JIT compiler.
+
+Misc
+----
+
+Also trinity, the Linux syscall fuzzer, has built-in support for BPF and
+SECCOMP-BPF kernel fuzzing.
+
+Written by
+----------
+
+The document was written in the hope that it is found useful and in order
+to give potential BPF hackers or security auditors a better overview of
+the underlying architecture.
+
+Jay Schulist <jschlst@samba.org>
+Daniel Borkmann <dborkman@redhat.com>
diff --git a/Documentation/networking/i40evf.txt b/Documentation/networking/i40evf.txt
new file mode 100644
index 0000000..21e4127
--- /dev/null
+++ b/Documentation/networking/i40evf.txt
@@ -0,0 +1,47 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+Intel XL710 X710 Virtual Function Linux driver.
+Copyright(c) 2013 Intel Corporation.
+
+Contents
+========
+
+- Identifying Your Adapter
+- Known Issues/Troubleshooting
+- Support
+
+This file describes the i40evf Linux* Base Driver for the Intel(R) XL710
+X710 Virtual Function.
+
+The i40evf driver supports XL710 and X710 virtual function devices that
+can only be activated on kernels with CONFIG_PCI_IOV enabled.
+
+The guest OS loading the i40evf driver must support MSI-X interrupts.
+
+Identifying Your Adapter
+========================
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+ http://support.intel.com/support/go/network/adapter/idguide.htm
+
+Known Issues/Troubleshooting
+============================
+
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+ http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 8a984e9..5de0374 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -15,17 +15,47 @@ ip_default_ttl - INTEGER
forwarded) IP packets. Should be between 1 and 255 inclusive.
Default: 64 (as recommended by RFC1700)
-ip_no_pmtu_disc - BOOLEAN
- Disable Path MTU Discovery. If enabled and a
+ip_no_pmtu_disc - INTEGER
+ Disable Path MTU Discovery. If enabled in mode 1 and a
fragmentation-required ICMP is received, the PMTU to this
destination will be set to min_pmtu (see below). You will need
to raise min_pmtu to the smallest interface MTU on your system
manually if you want to avoid locally generated fragments.
+
+ In mode 2 incoming Path MTU Discovery messages will be
+ discarded. Outgoing frames are handled the same as in mode 1,
+ implicitly setting IP_PMTUDISC_DONT on every created socket.
+
+ Mode 3 is a hardend pmtu discover mode. The kernel will only
+ accept fragmentation-needed errors if the underlying protocol
+ can verify them besides a plain socket lookup. Current
+ protocols for which pmtu events will be honored are TCP, SCTP
+ and DCCP as they verify e.g. the sequence number or the
+ association. This mode should not be enabled globally but is
+ only intended to secure e.g. name servers in namespaces where
+ TCP path mtu must still work but path MTU information of other
+ protocols should be discarded. If enabled globally this mode
+ could break other protocols.
+
+ Possible values: 0-3
Default: FALSE
min_pmtu - INTEGER
default 552 - minimum discovered Path MTU
+ip_forward_use_pmtu - BOOLEAN
+ By default we don't trust protocol path MTUs while forwarding
+ because they could be easily forged and can lead to unwanted
+ fragmentation by the router.
+ You only need to enable this if you have user-space software
+ which tries to discover path mtus by itself and depends on the
+ kernel honoring this information. This is normally not the
+ case.
+ Default: 0 (disabled)
+ Possible values:
+ 0 - disabled
+ 1 - enabled
+
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
@@ -160,6 +190,16 @@ tcp_app_win - INTEGER
buffer. Value 0 is special, it means that nothing is reserved.
Default: 31
+tcp_autocorking - BOOLEAN
+ Enable TCP auto corking :
+ When applications do consecutive small write()/sendmsg() system calls,
+ we try to coalesce these small writes as much as possible, to lower
+ total amount of sent packets. This is done if at least one prior
+ packet for the flow is waiting in Qdisc queues or device transmit
+ queue. Applications can still use TCP_CORK for optimal behavior
+ when they know how/when to uncork their sockets.
+ Default : 1
+
tcp_available_congestion_control - STRING
Shows the available congestion control choices that are registered.
More congestion control algorithms may be available as modules,
@@ -1078,6 +1118,21 @@ bindv6only - BOOLEAN
Default: FALSE (as specified in RFC3493)
+flowlabel_consistency - BOOLEAN
+ Protect the consistency (and unicity) of flow label.
+ You have to disable it to use IPV6_FL_F_REFLECT flag on the
+ flow label manager.
+ TRUE: enabled
+ FALSE: disabled
+ Default: TRUE
+
+anycast_src_echo_reply - BOOLEAN
+ Controls the use of anycast addresses as source addresses for ICMPv6
+ echo reply
+ TRUE: enabled
+ FALSE: disabled
+ Default: FALSE
+
IPv6 Fragmentation:
ip6frag_high_thresh - INTEGER
diff --git a/Documentation/networking/ipsec.txt b/Documentation/networking/ipsec.txt
new file mode 100644
index 0000000..8dbc08b
--- /dev/null
+++ b/Documentation/networking/ipsec.txt
@@ -0,0 +1,38 @@
+
+Here documents known IPsec corner cases which need to be keep in mind when
+deploy various IPsec configuration in real world production environment.
+
+1. IPcomp: Small IP packet won't get compressed at sender, and failed on
+ policy check on receiver.
+
+Quote from RFC3173:
+2.2. Non-Expansion Policy
+
+ If the total size of a compressed payload and the IPComp header, as
+ defined in section 3, is not smaller than the size of the original
+ payload, the IP datagram MUST be sent in the original non-compressed
+ form. To clarify: If an IP datagram is sent non-compressed, no
+
+ IPComp header is added to the datagram. This policy ensures saving
+ the decompression processing cycles and avoiding incurring IP
+ datagram fragmentation when the expanded datagram is larger than the
+ MTU.
+
+ Small IP datagrams are likely to expand as a result of compression.
+ Therefore, a numeric threshold should be applied before compression,
+ where IP datagrams of size smaller than the threshold are sent in the
+ original form without attempting compression. The numeric threshold
+ is implementation dependent.
+
+Current IPComp implementation is indeed by the book, while as in practice
+when sending non-compressed packet to the peer(whether or not packet len
+is smaller than the threshold or the compressed len is large than original
+packet len), the packet is dropped when checking the policy as this packet
+matches the selector but not coming from any XFRM layer, i.e., with no
+security path. Such naked packet will not eventually make it to upper layer.
+The result is much more wired to the user when ping peer with different
+payload length.
+
+One workaround is try to set "level use" for each policy if user observed
+above scenario. The consequence of doing so is small packet(uncompressed)
+will skip policy checking on receiver side.
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index 8e48e3b..91ffe1d 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -98,6 +98,11 @@ by the kernel.
The destruction of the socket and all associated resources
is done by a simple call to close(fd).
+Similarly as without PACKET_MMAP, it is possible to use one socket
+for capture and transmission. This can be done by mapping the
+allocated RX and TX buffer ring with a single mmap() call.
+See "Mapping and use of the circular buffer (ring)".
+
Next I will describe PACKET_MMAP settings and its constraints,
also the mapping of the circular buffer in the user process and
the use of this buffer.
@@ -414,6 +419,19 @@ tp_block_size/tp_frame_size frames there will be a gap between
the frames. This is because a frame cannot be spawn across two
blocks.
+To use one socket for capture and transmission, the mapping of both the
+RX and TX buffer ring has to be done with one call to mmap:
+
+ ...
+ setsockopt(fd, SOL_PACKET, PACKET_RX_RING, &foo, sizeof(foo));
+ setsockopt(fd, SOL_PACKET, PACKET_TX_RING, &bar, sizeof(bar));
+ ...
+ rx_ring = mmap(0, size * 2, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
+ tx_ring = rx_ring + size;
+
+RX must be the first as the kernel maps the TX ring memory right
+after the RX one.
+
At the beginning of each frame there is an status field (see
struct tpacket_hdr). If this field is 0 means that the frame is ready
to be used for the kernel, If not, there is a frame the user can read
@@ -517,8 +535,6 @@ where 'tpacket_version' can be TPACKET_V1 (default), TPACKET_V2, TPACKET_V3.
TPACKET_V1:
- Default if not otherwise specified by setsockopt(2)
- RX_RING, TX_RING available
- - VLAN metadata information available for packets
- (TP_STATUS_VLAN_VALID)
TPACKET_V1 --> TPACKET_V2:
- Made 64 bit clean due to unsigned long usage in TPACKET_V1
@@ -526,6 +542,13 @@ TPACKET_V1 --> TPACKET_V2:
userspace and the like
- Timestamp resolution in nanoseconds instead of microseconds
- RX_RING, TX_RING available
+ - VLAN metadata information available for packets
+ (TP_STATUS_VLAN_VALID, TP_STATUS_VLAN_TPID_VALID),
+ in the tpacket2_hdr structure:
+ - TP_STATUS_VLAN_VALID bit being set into the tp_status field indicates
+ that the tp_vlan_tci field has valid VLAN TCI value
+ - TP_STATUS_VLAN_TPID_VALID bit being set into the tp_status field
+ indicates that the tp_vlan_tpid field has valid VLAN TPID value
- How to switch to TPACKET_V2:
1. Replace struct tpacket_hdr by struct tpacket2_hdr
2. Query header len and save
@@ -953,6 +976,27 @@ int main(int argc, char **argp)
}
-------------------------------------------------------------------------------
++ PACKET_QDISC_BYPASS
+-------------------------------------------------------------------------------
+
+If there is a requirement to load the network with many packets in a similar
+fashion as pktgen does, you might set the following option after socket
+creation:
+
+ int one = 1;
+ setsockopt(fd, SOL_PACKET, PACKET_QDISC_BYPASS, &one, sizeof(one));
+
+This has the side-effect, that packets sent through PF_PACKET will bypass the
+kernel's qdisc layer and are forcedly pushed to the driver directly. Meaning,
+packet are not buffered, tc disciplines are ignored, increased loss can occur
+and such packets are also not visible to other PF_PACKET sockets anymore. So,
+you have been warned; generally, this can be useful for stress testing various
+components of a system.
+
+On default, PACKET_QDISC_BYPASS is disabled and needs to be explicitly enabled
+on PF_PACKET sockets.
+
+-------------------------------------------------------------------------------
+ PACKET_TIMESTAMP
-------------------------------------------------------------------------------
diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt
index d5b1a39..ebf2707 100644
--- a/Documentation/networking/phy.txt
+++ b/Documentation/networking/phy.txt
@@ -255,7 +255,8 @@ Writing a PHY driver
config_init: configures PHY into a sane state after a reset.
For instance, a Davicom PHY requires descrambling disabled.
- probe: Does any setup needed by the driver
+ probe: Allocate phy->priv, optionally refuse to bind.
+ PHY may not have been reset or had fixups run yet.
suspend/resume: power management
config_aneg: Changes the speed/duplex/negotiation settings
read_status: Reads the current speed/duplex/negotiation settings
diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt
index 75e4fd7..5a61a240 100644
--- a/Documentation/networking/pktgen.txt
+++ b/Documentation/networking/pktgen.txt
@@ -108,7 +108,9 @@ Examples:
MPLS_RND, VID_RND, SVID_RND
QUEUE_MAP_RND # queue map random
QUEUE_MAP_CPU # queue map mirrors smp_processor_id()
+ IPSEC # Make IPsec encapsulation for packet
+ pgset spi SPI_VALUE Set specific SA used to transform packet.
pgset "udp_src_min 9" set UDP source port min, If < udp_src_max, then
cycle through the port range.
@@ -177,6 +179,18 @@ Note when adding devices to a specific CPU there good idea to also assign
/proc/irq/XX/smp_affinity so the TX-interrupts gets bound to the same CPU.
as this reduces cache bouncing when freeing skb's.
+Enable IPsec
+============
+Default IPsec transformation with ESP encapsulation plus Transport mode
+could be enabled by simply setting:
+
+pgset "flag IPSEC"
+pgset "flows 1"
+
+To avoid breaking existing testbed scripts for using AH type and tunnel mode,
+user could use "pgset spi SPI_VALUE" to specify which formal of transformation
+to employ.
+
Current commands and configuration options
==========================================
@@ -225,6 +239,7 @@ flag
UDPDST_RND
MACSRC_RND
MACDST_RND
+ IPSEC
dst_min
dst_max
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index 9551622..356f791 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -159,10 +159,10 @@ struct ieee80211_regdomain mydriver_jp_regdom = {
REG_RULE(2412-20, 2484+20, 40, 6, 20, 0),
/* IEEE 802.11a, channels 34..48 */
REG_RULE(5170-20, 5240+20, 40, 6, 20,
- NL80211_RRF_PASSIVE_SCAN),
+ NL80211_RRF_NO_IR),
/* IEEE 802.11a, channels 52..64 */
REG_RULE(5260-20, 5320+20, 40, 6, 20,
- NL80211_RRF_NO_IBSS |
+ NL80211_RRF_NO_IR|
NL80211_RRF_DFS),
}
};
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index cdd916d..2090895 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -127,8 +127,9 @@ struct plat_stmmacenet_data {
int riwt_off;
void (*fix_mac_speed)(void *priv, unsigned int speed);
void (*bus_setup)(void __iomem *ioaddr);
- int (*init)(struct platform_device *pdev);
- void (*exit)(struct platform_device *pdev);
+ void *(*setup)(struct platform_device *pdev);
+ int (*init)(struct platform_device *pdev, void *priv);
+ void (*exit)(struct platform_device *pdev, void *priv);
void *custom_cfg;
void *custom_data;
void *bsp_priv;
@@ -169,10 +170,13 @@ Where:
o bus_setup: perform HW setup of the bus. For example, on some ST platforms
this field is used to configure the AMBA bridge to generate more
efficient STBus traffic.
- o init/exit: callbacks used for calling a custom initialization;
+ o setup/init/exit: callbacks used for calling a custom initialization;
this is sometime necessary on some platforms (e.g. ST boxes)
where the HW needs to have set some PIO lines or system cfg
- registers.
+ registers. setup should return a pointer to private data,
+ which will be stored in bsp_priv, and then passed to init and
+ exit callbacks. init/exit callbacks should not use or modify
+ platform data.
o custom_cfg/custom_data: this is a custom configuration that can be passed
while initializing the resources.
o bsp_priv: another private pointer.
diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt
index 98097d8..661d3c3 100644
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@@ -85,7 +85,7 @@ Filled in if SOF_TIMESTAMPING_SYS_HARDWARE is set. Requires support
by the network device and will be empty without that support.
-SIOCSHWTSTAMP:
+SIOCSHWTSTAMP, SIOCGHWTSTAMP:
Hardware time stamping must also be initialized for each device driver
that is expected to do hardware time stamping. The parameter is defined in
@@ -115,6 +115,10 @@ Only a processes with admin rights may change the configuration. User
space is responsible to ensure that multiple processes don't interfere
with each other and that the settings are reset.
+Any process can read the actual configuration by passing this
+structure to ioctl(SIOCGHWTSTAMP) in the same way. However, this has
+not been implemented in all drivers.
+
/* possible values for hwtstamp_config->tx_type */
enum {
/*
@@ -157,7 +161,8 @@ DEVICE IMPLEMENTATION
A driver which supports hardware time stamping must support the
SIOCSHWTSTAMP ioctl and update the supplied struct hwtstamp_config with
-the actual values as described in the section on SIOCSHWTSTAMP.
+the actual values as described in the section on SIOCSHWTSTAMP. It
+should also support SIOCGHWTSTAMP.
Time stamps for received packets must be stored in the skb. To get a pointer
to the shared time stamp structure of the skb call skb_hwtstamps(). Then
diff --git a/Documentation/networking/timestamping/.gitignore b/Documentation/networking/timestamping/.gitignore
index 71e81eb..a380159 100644
--- a/Documentation/networking/timestamping/.gitignore
+++ b/Documentation/networking/timestamping/.gitignore
@@ -1 +1,2 @@
timestamping
+hwtstamp_config
diff --git a/Documentation/networking/timestamping/Makefile b/Documentation/networking/timestamping/Makefile
index e799734..d934afc 100644
--- a/Documentation/networking/timestamping/Makefile
+++ b/Documentation/networking/timestamping/Makefile
@@ -2,12 +2,13 @@
obj- := dummy.o
# List of programs to build
-hostprogs-y := timestamping
+hostprogs-y := timestamping hwtstamp_config
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_timestamping.o += -I$(objtree)/usr/include
+HOSTCFLAGS_hwtstamp_config.o += -I$(objtree)/usr/include
clean:
- rm -f timestamping
+ rm -f timestamping hwtstamp_config
diff --git a/Documentation/networking/timestamping/hwtstamp_config.c b/Documentation/networking/timestamping/hwtstamp_config.c
new file mode 100644
index 0000000..e8b685a
--- /dev/null
+++ b/Documentation/networking/timestamping/hwtstamp_config.c
@@ -0,0 +1,134 @@
+/* Test program for SIOC{G,S}HWTSTAMP
+ * Copyright 2013 Solarflare Communications
+ * Author: Ben Hutchings
+ */
+
+#include <errno.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+
+#include <linux/if.h>
+#include <linux/net_tstamp.h>
+#include <linux/sockios.h>
+
+static int
+lookup_value(const char **names, int size, const char *name)
+{
+ int value;
+
+ for (value = 0; value < size; value++)
+ if (names[value] && strcasecmp(names[value], name) == 0)
+ return value;
+
+ return -1;
+}
+
+static const char *
+lookup_name(const char **names, int size, int value)
+{
+ return (value >= 0 && value < size) ? names[value] : NULL;
+}
+
+static void list_names(FILE *f, const char **names, int size)
+{
+ int value;
+
+ for (value = 0; value < size; value++)
+ if (names[value])
+ fprintf(f, " %s\n", names[value]);
+}
+
+static const char *tx_types[] = {
+#define TX_TYPE(name) [HWTSTAMP_TX_ ## name] = #name
+ TX_TYPE(OFF),
+ TX_TYPE(ON),
+ TX_TYPE(ONESTEP_SYNC)
+#undef TX_TYPE
+};
+#define N_TX_TYPES ((int)(sizeof(tx_types) / sizeof(tx_types[0])))
+
+static const char *rx_filters[] = {
+#define RX_FILTER(name) [HWTSTAMP_FILTER_ ## name] = #name
+ RX_FILTER(NONE),
+ RX_FILTER(ALL),
+ RX_FILTER(SOME),
+ RX_FILTER(PTP_V1_L4_EVENT),
+ RX_FILTER(PTP_V1_L4_SYNC),
+ RX_FILTER(PTP_V1_L4_DELAY_REQ),
+ RX_FILTER(PTP_V2_L4_EVENT),
+ RX_FILTER(PTP_V2_L4_SYNC),
+ RX_FILTER(PTP_V2_L4_DELAY_REQ),
+ RX_FILTER(PTP_V2_L2_EVENT),
+ RX_FILTER(PTP_V2_L2_SYNC),
+ RX_FILTER(PTP_V2_L2_DELAY_REQ),
+ RX_FILTER(PTP_V2_EVENT),
+ RX_FILTER(PTP_V2_SYNC),
+ RX_FILTER(PTP_V2_DELAY_REQ),
+#undef RX_FILTER
+};
+#define N_RX_FILTERS ((int)(sizeof(rx_filters) / sizeof(rx_filters[0])))
+
+static void usage(void)
+{
+ fputs("Usage: hwtstamp_config if_name [tx_type rx_filter]\n"
+ "tx_type is any of (case-insensitive):\n",
+ stderr);
+ list_names(stderr, tx_types, N_TX_TYPES);
+ fputs("rx_filter is any of (case-insensitive):\n", stderr);
+ list_names(stderr, rx_filters, N_RX_FILTERS);
+}
+
+int main(int argc, char **argv)
+{
+ struct ifreq ifr;
+ struct hwtstamp_config config;
+ const char *name;
+ int sock;
+
+ if ((argc != 2 && argc != 4) || (strlen(argv[1]) >= IFNAMSIZ)) {
+ usage();
+ return 2;
+ }
+
+ if (argc == 4) {
+ config.flags = 0;
+ config.tx_type = lookup_value(tx_types, N_TX_TYPES, argv[2]);
+ config.rx_filter = lookup_value(rx_filters, N_RX_FILTERS, argv[3]);
+ if (config.tx_type < 0 || config.rx_filter < 0) {
+ usage();
+ return 2;
+ }
+ }
+
+ sock = socket(AF_INET, SOCK_DGRAM, 0);
+ if (sock < 0) {
+ perror("socket");
+ return 1;
+ }
+
+ strcpy(ifr.ifr_name, argv[1]);
+ ifr.ifr_data = (caddr_t)&config;
+
+ if (ioctl(sock, (argc == 2) ? SIOCGHWTSTAMP : SIOCSHWTSTAMP, &ifr)) {
+ perror("ioctl");
+ return 1;
+ }
+
+ printf("flags = %#x\n", config.flags);
+ name = lookup_name(tx_types, N_TX_TYPES, config.tx_type);
+ if (name)
+ printf("tx_type = %s\n", name);
+ else
+ printf("tx_type = %d\n", config.tx_type);
+ name = lookup_name(rx_filters, N_RX_FILTERS, config.rx_filter);
+ if (name)
+ printf("rx_filter = %s\n", name);
+ else
+ printf("rx_filter = %d\n", config.rx_filter);
+
+ return 0;
+}
diff --git a/Documentation/s390/qeth.txt b/Documentation/s390/qeth.txt
new file mode 100644
index 0000000..74122ad
--- /dev/null
+++ b/Documentation/s390/qeth.txt
@@ -0,0 +1,50 @@
+IBM s390 QDIO Ethernet Driver
+
+HiperSockets Bridge Port Support
+
+Uevents
+
+To generate the events the device must be assigned a role of either
+a primary or a secondary Bridge Port. For more information, see
+"z/VM Connectivity, SC24-6174".
+
+When run on HiperSockets Bridge Capable Port hardware, and the state
+of some configured Bridge Port device on the channel changes, a udev
+event with ACTION=CHANGE is emitted on behalf of the corresponding
+ccwgroup device. The event has the following attributes:
+
+BRIDGEPORT=statechange - indicates that the Bridge Port device changed
+ its state.
+
+ROLE={primary|secondary|none} - the role assigned to the port.
+
+STATE={active|standby|inactive} - the newly assumed state of the port.
+
+When run on HiperSockets Bridge Capable Port hardware with host address
+notifications enabled, a udev event with ACTION=CHANGE is emitted.
+It is emitted on behalf of the corresponding ccwgroup device when a host
+or a VLAN is registered or unregistered on the network served by the device.
+The event has the following attributes:
+
+BRIDGEDHOST={reset|register|deregister|abort} - host address
+ notifications are started afresh, a new host or VLAN is registered or
+ deregistered on the Bridge Port HiperSockets channel, or address
+ notifications are aborted.
+
+VLAN=numeric-vlan-id - VLAN ID on which the event occurred. Not included
+ if no VLAN is involved in the event.
+
+MAC=xx:xx:xx:xx:xx:xx - MAC address of the host that is being registered
+ or deregistered from the HiperSockets channel. Not reported if the
+ event reports the creation or destruction of a VLAN.
+
+NTOK_BUSID=x.y.zzzz - device bus ID (CSSID, SSID and device number).
+
+NTOK_IID=xx - device IID.
+
+NTOK_CHPID=xx - device CHPID.
+
+NTOK_CHID=xxxx - device channel ID.
+
+Note that the NTOK_* attributes refer to devices other than the one
+connected to the system on which the OS is running.
diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt
index f866c72..a445da0 100644
--- a/Documentation/unaligned-memory-access.txt
+++ b/Documentation/unaligned-memory-access.txt
@@ -137,24 +137,34 @@ Code that causes unaligned access
=================================
With the above in mind, let's move onto a real life example of a function
-that can cause an unaligned memory access. The following function adapted
+that can cause an unaligned memory access. The following function taken
from include/linux/etherdevice.h is an optimized routine to compare two
ethernet MAC addresses for equality.
-unsigned int compare_ether_addr(const u8 *addr1, const u8 *addr2)
+bool ether_addr_equal(const u8 *addr1, const u8 *addr2)
{
- const u16 *a = (const u16 *) addr1;
- const u16 *b = (const u16 *) addr2;
+#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
+ u32 fold = ((*(const u32 *)addr1) ^ (*(const u32 *)addr2)) |
+ ((*(const u16 *)(addr1 + 4)) ^ (*(const u16 *)(addr2 + 4)));
+
+ return fold == 0;
+#else
+ const u16 *a = (const u16 *)addr1;
+ const u16 *b = (const u16 *)addr2;
return ((a[0] ^ b[0]) | (a[1] ^ b[1]) | (a[2] ^ b[2])) != 0;
+#endif
}
-In the above function, the reference to a[0] causes 2 bytes (16 bits) to
-be read from memory starting at address addr1. Think about what would happen
-if addr1 was an odd address such as 0x10003. (Hint: it'd be an unaligned
-access.)
+In the above function, when the hardware has efficient unaligned access
+capability, there is no issue with this code. But when the hardware isn't
+able to access memory on arbitrary boundaries, the reference to a[0] causes
+2 bytes (16 bits) to be read from memory starting at address addr1.
+
+Think about what would happen if addr1 was an odd address such as 0x10003.
+(Hint: it'd be an unaligned access.)
Despite the potential unaligned access problems with the above function, it
-is included in the kernel anyway but is understood to only work on
+is included in the kernel anyway but is understood to only work normally on
16-bit-aligned addresses. It is up to the caller to ensure this alignment or
not use this function at all. This alignment-unsafe function is still useful
as it is a decent optimization for the cases when you can ensure alignment,
diff --git a/MAINTAINERS b/MAINTAINERS
index 8a777a2..1912139 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1473,7 +1473,7 @@ F: Documentation/aoe/
F: drivers/block/aoe/
ATHEROS ATH GENERIC UTILITIES
-M: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
+M: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
L: linux-wireless@vger.kernel.org
S: Supported
F: drivers/net/wireless/ath/*
@@ -1481,7 +1481,7 @@ F: drivers/net/wireless/ath/*
ATHEROS ATH5K WIRELESS DRIVER
M: Jiri Slaby <jirislaby@gmail.com>
M: Nick Kossifidis <mickflemm@gmail.com>
-M: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
+M: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
L: linux-wireless@vger.kernel.org
L: ath5k-devel@lists.ath5k.org
W: http://wireless.kernel.org/en/users/Drivers/ath5k
@@ -1496,17 +1496,6 @@ T: git git://github.com/kvalo/ath.git
S: Supported
F: drivers/net/wireless/ath/ath6kl/
-ATHEROS ATH9K WIRELESS DRIVER
-M: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com>
-M: Jouni Malinen <jouni@qca.qualcomm.com>
-M: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
-M: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
-L: linux-wireless@vger.kernel.org
-L: ath9k-devel@lists.ath9k.org
-W: http://wireless.kernel.org/en/users/Drivers/ath9k
-S: Supported
-F: drivers/net/wireless/ath/ath9k/
-
WILOCITY WIL6210 WIRELESS DRIVER
M: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
L: linux-wireless@vger.kernel.org
@@ -2061,6 +2050,7 @@ L: linux-can@vger.kernel.org
W: http://gitorious.org/linux-can
T: git git://gitorious.org/linux-can/linux-can-next.git
S: Maintained
+F: Documentation/networking/can.txt
F: net/can/
F: include/linux/can/core.h
F: include/uapi/linux/can.h
@@ -4523,7 +4513,7 @@ M: Deepak Saxena <dsaxena@plexity.net>
S: Maintained
F: drivers/char/hw_random/ixp4xx-rng.c
-INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf/i40e)
+INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf/i40e/i40evf)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
M: Jesse Brandeburg <jesse.brandeburg@intel.com>
M: Bruce Allan <bruce.w.allan@intel.com>
@@ -4532,6 +4522,7 @@ M: Don Skidmore <donald.c.skidmore@intel.com>
M: Greg Rose <gregory.v.rose@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
+M: Mitch Williams <mitch.a.williams@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://www.intel.com/support/feedback.htm
W: http://e1000.sourceforge.net/
@@ -4547,6 +4538,7 @@ F: Documentation/networking/ixgb.txt
F: Documentation/networking/ixgbe.txt
F: Documentation/networking/ixgbevf.txt
F: Documentation/networking/i40e.txt
+F: Documentation/networking/i40evf.txt
F: drivers/net/ethernet/intel/
INTEL-MID GPIO DRIVER
@@ -7041,6 +7033,14 @@ T: git git://linuxtv.org/anttip/media_tree.git
S: Maintained
F: drivers/media/tuners/qt1010*
+QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
+M: QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
+L: linux-wireless@vger.kernel.org
+L: ath9k-devel@lists.ath9k.org
+W: http://wireless.kernel.org/en/users/Drivers/ath9k
+S: Supported
+F: drivers/net/wireless/ath/ath9k/
+
QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
M: Kalle Valo <kvalo@qca.qualcomm.com>
L: ath10k@lists.infradead.org
@@ -7702,7 +7702,7 @@ F: drivers/net/ethernet/emulex/benet/
SFC NETWORK DRIVER
M: Solarflare linux maintainers <linux-net-drivers@solarflare.com>
-M: Ben Hutchings <bhutchings@solarflare.com>
+M: Shradha Shah <sshah@solarflare.com>
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/sfc/
@@ -8695,12 +8695,11 @@ S: Maintained
F: sound/soc/codecs/twl4030*
TI WILINK WIRELESS DRIVERS
-M: Luciano Coelho <luca@coelho.fi>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/wl12xx
W: http://wireless.kernel.org/en/users/Drivers/wl1251
T: git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
-S: Maintained
+S: Orphan
F: drivers/net/wireless/ti/
F: include/linux/wl12xx.h
diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index f01fb50..a73a8e2 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -4,3 +4,4 @@ generic-y += clkdev.h
generic-y += exec.h
generic-y += trace_clock.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/alpha/include/uapi/asm/socket.h b/arch/alpha/include/uapi/asm/socket.h
index e3a1491..3de1394 100644
--- a/arch/alpha/include/uapi/asm/socket.h
+++ b/arch/alpha/include/uapi/asm/socket.h
@@ -85,4 +85,6 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _UAPI_ASM_SOCKET_H */
diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild
index 9ae21c1..0d33629 100644
--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@@ -12,6 +12,7 @@ generic-y += fcntl.h
generic-y += fb.h
generic-y += ftrace.h
generic-y += hardirq.h
+generic-y += hash.h
generic-y += hw_irq.h
generic-y += ioctl.h
generic-y += ioctls.h
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index c38b58c..3278afe 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -34,3 +34,4 @@ generic-y += timex.h
generic-y += trace_clock.h
generic-y += unaligned.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/arm64/include/asm/Kbuild b/arch/arm64/include/asm/Kbuild
index d0ff25d..71c53ec 100644
--- a/arch/arm64/include/asm/Kbuild
+++ b/arch/arm64/include/asm/Kbuild
@@ -50,3 +50,4 @@ generic-y += user.h
generic-y += vga.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index 658001b..cfb9fe1 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -18,3 +18,4 @@ generic-y += sections.h
generic-y += topology.h
generic-y += trace_clock.h
generic-y += xor.h
+generic-y += hash.h
diff --git a/arch/avr32/include/uapi/asm/socket.h b/arch/avr32/include/uapi/asm/socket.h
index cbf902e..6e6cd15 100644
--- a/arch/avr32/include/uapi/asm/socket.h
+++ b/arch/avr32/include/uapi/asm/socket.h
@@ -78,4 +78,6 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _UAPI__ASM_AVR32_SOCKET_H */
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index f2b4347..359d36f 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -45,3 +45,4 @@ generic-y += unaligned.h
generic-y += user.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/blackfin/mach-bf609/boards/ezkit.c b/arch/blackfin/mach-bf609/boards/ezkit.c
index 82beedd..05194e9 100644
--- a/arch/blackfin/mach-bf609/boards/ezkit.c
+++ b/arch/blackfin/mach-bf609/boards/ezkit.c
@@ -117,7 +117,7 @@ static struct stmmac_dma_cfg eth_dma_cfg = {
.pbl = 2,
};
-int stmmac_ptp_clk_init(struct platform_device *pdev)
+int stmmac_ptp_clk_init(struct platform_device *pdev, void *priv)
{
bfin_write32(PADS0_EMAC_PTP_CLKSEL, 0);
return 0;
diff --git a/arch/c6x/include/asm/Kbuild b/arch/c6x/include/asm/Kbuild
index fc0b3c3..d73bb85 100644
--- a/arch/c6x/include/asm/Kbuild
+++ b/arch/c6x/include/asm/Kbuild
@@ -57,3 +57,4 @@ generic-y += user.h
generic-y += vga.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild
index 199b1a9..f3fd876 100644
--- a/arch/cris/include/asm/Kbuild
+++ b/arch/cris/include/asm/Kbuild
@@ -6,6 +6,7 @@ header-y += arch-v32/
generic-y += barrier.h
generic-y += clkdev.h
generic-y += exec.h
+generic-y += hash.h
generic-y += kvm_para.h
generic-y += linkage.h
generic-y += module.h
diff --git a/arch/cris/include/uapi/asm/socket.h b/arch/cris/include/uapi/asm/socket.h
index 13829aa..ed94e5e 100644
--- a/arch/cris/include/uapi/asm/socket.h
+++ b/arch/cris/include/uapi/asm/socket.h
@@ -80,6 +80,8 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild
index 74742dc..bc42f14 100644
--- a/arch/frv/include/asm/Kbuild
+++ b/arch/frv/include/asm/Kbuild
@@ -3,3 +3,4 @@ generic-y += clkdev.h
generic-y += exec.h
generic-y += trace_clock.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/frv/include/uapi/asm/socket.h b/arch/frv/include/uapi/asm/socket.h
index 5d42997..ca2c6e6 100644
--- a/arch/frv/include/uapi/asm/socket.h
+++ b/arch/frv/include/uapi/asm/socket.h
@@ -78,5 +78,7 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild
index ada843c..38ca45d 100644
--- a/arch/hexagon/include/asm/Kbuild
+++ b/arch/hexagon/include/asm/Kbuild
@@ -16,6 +16,7 @@ generic-y += fb.h
generic-y += fcntl.h
generic-y += ftrace.h
generic-y += hardirq.h
+generic-y += hash.h
generic-y += hw_irq.h
generic-y += ioctl.h
generic-y += ioctls.h
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index f93ee08..283a831 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -4,4 +4,5 @@ generic-y += exec.h
generic-y += kvm_para.h
generic-y += trace_clock.h
generic-y += preempt.h
-generic-y += vtime.h \ No newline at end of file
+generic-y += vtime.h
+generic-y += hash.h
diff --git a/arch/ia64/include/uapi/asm/socket.h b/arch/ia64/include/uapi/asm/socket.h
index c25302f..a1b49ba 100644
--- a/arch/ia64/include/uapi/asm/socket.h
+++ b/arch/ia64/include/uapi/asm/socket.h
@@ -87,4 +87,6 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/m32r/include/asm/Kbuild b/arch/m32r/include/asm/Kbuild
index 2b58c5f..932435a 100644
--- a/arch/m32r/include/asm/Kbuild
+++ b/arch/m32r/include/asm/Kbuild
@@ -4,3 +4,4 @@ generic-y += exec.h
generic-y += module.h
generic-y += trace_clock.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/m32r/include/uapi/asm/socket.h b/arch/m32r/include/uapi/asm/socket.h
index 5296665..6c9a24b 100644
--- a/arch/m32r/include/uapi/asm/socket.h
+++ b/arch/m32r/include/uapi/asm/socket.h
@@ -78,4 +78,6 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
index a5d27f2..7cc8c36 100644
--- a/arch/m68k/include/asm/Kbuild
+++ b/arch/m68k/include/asm/Kbuild
@@ -32,3 +32,4 @@ generic-y += types.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/metag/include/asm/Kbuild b/arch/metag/include/asm/Kbuild
index 84d0c1d..b716d80 100644
--- a/arch/metag/include/asm/Kbuild
+++ b/arch/metag/include/asm/Kbuild
@@ -53,3 +53,4 @@ generic-y += user.h
generic-y += vga.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
index a824265..2b98bc7 100644
--- a/arch/microblaze/include/asm/Kbuild
+++ b/arch/microblaze/include/asm/Kbuild
@@ -2,6 +2,7 @@
generic-y += barrier.h
generic-y += clkdev.h
generic-y += exec.h
+generic-y += hash.h
generic-y += trace_clock.h
generic-y += syscalls.h
generic-y += preempt.h
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c
index 1f30571..9057728 100644
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
@@ -28,6 +28,9 @@
#include <linux/export.h>
#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include <linux/ssb/ssb.h>
#include <linux/ssb/ssb_embedded.h>
#include <linux/bcma/bcma_soc.h>
@@ -225,6 +228,12 @@ void __init plat_mem_setup(void)
bcm47xx_board_detect();
}
+static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = {
+ .link = 1,
+ .speed = SPEED_100,
+ .duplex = DUPLEX_FULL,
+};
+
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
@@ -239,6 +248,7 @@ static int __init bcm47xx_register_bus_complete(void)
break;
#endif
}
+ fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
return 0;
}
device_initcall(bcm47xx_register_bus_complete);
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 1acbb8b..2d7f650 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -14,3 +14,4 @@ generic-y += trace_clock.h
generic-y += preempt.h
generic-y += ucontext.h
generic-y += xor.h
+generic-y += hash.h
diff --git a/arch/mips/include/uapi/asm/socket.h b/arch/mips/include/uapi/asm/socket.h
index 0df9787..a14baa2 100644
--- a/arch/mips/include/uapi/asm/socket.h
+++ b/arch/mips/include/uapi/asm/socket.h
@@ -96,4 +96,6 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _UAPI_ASM_SOCKET_H */
diff --git a/arch/mn10300/include/asm/Kbuild b/arch/mn10300/include/asm/Kbuild
index 032143e..992e989 100644
--- a/arch/mn10300/include/asm/Kbuild
+++ b/arch/mn10300/include/asm/Kbuild
@@ -2,5 +2,6 @@
generic-y += barrier.h
generic-y += clkdev.h
generic-y += exec.h
+generic-y += hash.h
generic-y += trace_clock.h
generic-y += preempt.h
diff --git a/arch/mn10300/include/uapi/asm/socket.h b/arch/mn10300/include/uapi/asm/socket.h
index 71dedca..6aa3ce1 100644
--- a/arch/mn10300/include/uapi/asm/socket.h
+++ b/arch/mn10300/include/uapi/asm/socket.h
@@ -78,4 +78,6 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild
index da1951a..2e40f1c 100644
--- a/arch/openrisc/include/asm/Kbuild
+++ b/arch/openrisc/include/asm/Kbuild
@@ -69,3 +69,4 @@ generic-y += vga.h
generic-y += word-at-a-time.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild
index 34b0be4..752c981b 100644
--- a/arch/parisc/include/asm/Kbuild
+++ b/arch/parisc/include/asm/Kbuild
@@ -6,3 +6,4 @@ generic-y += word-at-a-time.h auxvec.h user.h cputime.h emergency-restart.h \
poll.h xor.h clkdev.h exec.h
generic-y += trace_clock.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/parisc/include/uapi/asm/socket.h b/arch/parisc/include/uapi/asm/socket.h
index 70b3674..fe35cea 100644
--- a/arch/parisc/include/uapi/asm/socket.h
+++ b/arch/parisc/include/uapi/asm/socket.h
@@ -77,4 +77,6 @@
#define SO_MAX_PACING_RATE 0x4028
+#define SO_BPF_EXTENSIONS 0x4029
+
#endif /* _UAPI_ASM_SOCKET_H */
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index d8f9d2f..6c0a955 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -3,4 +3,5 @@ generic-y += clkdev.h
generic-y += rwsem.h
generic-y += trace_clock.h
generic-y += preempt.h
-generic-y += vtime.h \ No newline at end of file
+generic-y += vtime.h
+generic-y += hash.h
diff --git a/arch/powerpc/include/uapi/asm/socket.h b/arch/powerpc/include/uapi/asm/socket.h
index fa69832..a9c3e2e 100644
--- a/arch/powerpc/include/uapi/asm/socket.h
+++ b/arch/powerpc/include/uapi/asm/socket.h
@@ -85,4 +85,6 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
index 7a5288f..8386a4a 100644
--- a/arch/s390/include/asm/Kbuild
+++ b/arch/s390/include/asm/Kbuild
@@ -3,3 +3,4 @@
generic-y += clkdev.h
generic-y += trace_clock.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/s390/include/uapi/asm/socket.h b/arch/s390/include/uapi/asm/socket.h
index c286c2e..e031332 100644
--- a/arch/s390/include/uapi/asm/socket.h
+++ b/arch/s390/include/uapi/asm/socket.h
@@ -84,4 +84,6 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _ASM_SOCKET_H */
diff --git a/arch/score/include/asm/Kbuild b/arch/score/include/asm/Kbuild
index fe7471e..146b9d5 100644
--- a/arch/score/include/asm/Kbuild
+++ b/arch/score/include/asm/Kbuild
@@ -3,6 +3,8 @@ header-y +=
generic-y += barrier.h
generic-y += clkdev.h
+generic-y += hash.h
generic-y += trace_clock.h
generic-y += xor.h
generic-y += preempt.h
+
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index 231efbb..0cd7198 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -35,3 +35,4 @@ generic-y += trace_clock.h
generic-y += ucontext.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index bf39066..4b60a0c 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -17,3 +17,4 @@ generic-y += trace_clock.h
generic-y += types.h
generic-y += word-at-a-time.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/sparc/include/uapi/asm/socket.h b/arch/sparc/include/uapi/asm/socket.h
index 0f21e9a..54d9608 100644
--- a/arch/sparc/include/uapi/asm/socket.h
+++ b/arch/sparc/include/uapi/asm/socket.h
@@ -74,6 +74,8 @@
#define SO_MAX_PACING_RATE 0x0031
+#define SO_BPF_EXTENSIONS 0x0032
+
/* Security levels - as per NRL IPv6 - don't actually do anything */
#define SO_SECURITY_AUTHENTICATION 0x5001
#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x5002
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
index 22f3bd1..3793c75 100644
--- a/arch/tile/include/asm/Kbuild
+++ b/arch/tile/include/asm/Kbuild
@@ -39,3 +39,4 @@ generic-y += trace_clock.h
generic-y += types.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild
index fdde187..75de4ab 100644
--- a/arch/um/include/asm/Kbuild
+++ b/arch/um/include/asm/Kbuild
@@ -4,3 +4,4 @@ generic-y += ftrace.h pci.h io.h param.h delay.h mutex.h current.h exec.h
generic-y += switch_to.h clkdev.h
generic-y += trace_clock.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
index 00045cb..3ef4f9d 100644
--- a/arch/unicore32/include/asm/Kbuild
+++ b/arch/unicore32/include/asm/Kbuild
@@ -61,3 +61,4 @@ generic-y += user.h
generic-y += vga.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/x86/include/asm/hash.h b/arch/x86/include/asm/hash.h
new file mode 100644
index 0000000..e8c58f8
--- /dev/null
+++ b/arch/x86/include/asm/hash.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_X86_HASH_H
+#define _ASM_X86_HASH_H
+
+struct fast_hash_ops;
+extern void setup_arch_fast_hash(struct fast_hash_ops *ops);
+
+#endif /* _ASM_X86_HASH_H */
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 992d63b..eabcb6e 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -24,7 +24,7 @@ lib-$(CONFIG_SMP) += rwlock.o
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
lib-$(CONFIG_INSTRUCTION_DECODER) += insn.o inat.o
-obj-y += msr.o msr-reg.o msr-reg-export.o
+obj-y += msr.o msr-reg.o msr-reg-export.o hash.o
ifeq ($(CONFIG_X86_32),y)
obj-y += atomic64_32.o
diff --git a/arch/x86/lib/hash.c b/arch/x86/lib/hash.c
new file mode 100644
index 0000000..3056702
--- /dev/null
+++ b/arch/x86/lib/hash.c
@@ -0,0 +1,88 @@
+/*
+ * Some portions derived from code covered by the following notice:
+ *
+ * Copyright (c) 2010-2013 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/hash.h>
+
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+#include <asm/hash.h>
+
+static inline u32 crc32_u32(u32 crc, u32 val)
+{
+ asm ("crc32l %1,%0\n" : "+r" (crc) : "rm" (val));
+ return crc;
+}
+
+static u32 intel_crc4_2_hash(const void *data, u32 len, u32 seed)
+{
+ const u32 *p32 = (const u32 *) data;
+ u32 i, tmp = 0;
+
+ for (i = 0; i < len / 4; i++)
+ seed = crc32_u32(*p32++, seed);
+
+ switch (3 - (len & 0x03)) {
+ case 0:
+ tmp |= *((const u8 *) p32 + 2) << 16;
+ /* fallthrough */
+ case 1:
+ tmp |= *((const u8 *) p32 + 1) << 8;
+ /* fallthrough */
+ case 2:
+ tmp |= *((const u8 *) p32);
+ seed = crc32_u32(tmp, seed);
+ default:
+ break;
+ }
+
+ return seed;
+}
+
+static u32 intel_crc4_2_hash2(const u32 *data, u32 len, u32 seed)
+{
+ const u32 *p32 = (const u32 *) data;
+ u32 i;
+
+ for (i = 0; i < len; i++)
+ seed = crc32_u32(*p32++, seed);
+
+ return seed;
+}
+
+void setup_arch_fast_hash(struct fast_hash_ops *ops)
+{
+ if (cpu_has_xmm4_2) {
+ ops->hash = intel_crc4_2_hash;
+ ops->hash2 = intel_crc4_2_hash2;
+ }
+}
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index 5851db2..0a337e4 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -28,3 +28,4 @@ generic-y += topology.h
generic-y += trace_clock.h
generic-y += xor.h
generic-y += preempt.h
+generic-y += hash.h
diff --git a/arch/xtensa/include/uapi/asm/socket.h b/arch/xtensa/include/uapi/asm/socket.h
index 7db5c22..39acec0c 100644
--- a/arch/xtensa/include/uapi/asm/socket.h
+++ b/arch/xtensa/include/uapi/asm/socket.h
@@ -89,4 +89,6 @@
#define SO_MAX_PACING_RATE 47
+#define SO_BPF_EXTENSIONS 48
+
#endif /* _XTENSA_SOCKET_H */
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 8557adc..aa6be26 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -419,7 +419,6 @@ static void he_remove_one(struct pci_dev *pci_dev)
atm_dev_deregister(atm_dev);
kfree(he_dev);
- pci_set_drvdata(pci_dev, NULL);
pci_disable_device(pci_dev);
}
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 5aca5f4..9587e95 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -52,6 +52,7 @@
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/atomic.h>
+#include <linux/etherdevice.h>
#include "nicstar.h"
#ifdef CONFIG_ATM_NICSTAR_USE_SUNI
#include "suni.h"
@@ -781,8 +782,7 @@ static int ns_init_card(int i, struct pci_dev *pcidev)
if (mac[i] == NULL || !mac_pton(mac[i], card->atmdev->esi)) {
nicstar_read_eprom(card->membase, NICSTAR_EPROM_MAC_ADDR_OFFSET,
card->atmdev->esi, 6);
- if (memcmp(card->atmdev->esi, "\x00\x00\x00\x00\x00\x00", 6) ==
- 0) {
+ if (ether_addr_equal(card->atmdev->esi, "\x00\x00\x00\x00\x00\x00")) {
nicstar_read_eprom(card->membase,
NICSTAR_EPROM_MAC_ADDR_OFFSET_ALT,
card->atmdev->esi, 6);
diff --git a/drivers/atm/solos-pci.c b/drivers/atm/solos-pci.c
index 32784d1..e3fb496 100644
--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -1335,7 +1335,6 @@ static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
out_unmap_both:
kfree(card->dma_bounce);
- pci_set_drvdata(dev, NULL);
pci_iounmap(dev, card->buffers);
out_unmap_config:
pci_iounmap(dev, card->config_regs);
@@ -1457,7 +1456,6 @@ static void fpga_remove(struct pci_dev *dev)
pci_release_regions(dev);
pci_disable_device(dev);
- pci_set_drvdata(dev, NULL);
kfree(card);
}
diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h
index 0215f9a..09b632a 100644
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -33,8 +33,6 @@ int __init bcma_bus_early_register(struct bcma_bus *bus,
int bcma_bus_suspend(struct bcma_bus *bus);
int bcma_bus_resume(struct bcma_bus *bus);
#endif
-struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
- u8 unit);
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
diff --git a/drivers/bcma/driver_chipcommon_sflash.c b/drivers/bcma/driver_chipcommon_sflash.c
index 4d07cce..7e11ef4 100644
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -38,7 +38,7 @@ static const struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
{ "M25P32", 0x15, 0x10000, 64, },
{ "M25P64", 0x16, 0x10000, 128, },
{ "M25FL128", 0x17, 0x10000, 256, },
- { 0 },
+ { NULL },
};
static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
@@ -56,7 +56,7 @@ static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
{ "SST25VF016", 0x41, 0x1000, 512, },
{ "SST25VF032", 0x4a, 0x1000, 1024, },
{ "SST25VF064", 0x4b, 0x1000, 2048, },
- { 0 },
+ { NULL },
};
static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
@@ -67,7 +67,7 @@ static const struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
{ "AT45DB161", 0x2c, 512, 4096, },
{ "AT45DB321", 0x34, 512, 8192, },
{ "AT45DB642", 0x3c, 1024, 8192, },
- { 0 },
+ { NULL },
};
static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c
index 6fb98b5..e3333053 100644
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -238,7 +238,6 @@ static void bcma_host_pci_remove(struct pci_dev *dev)
pci_release_regions(dev);
pci_disable_device(dev);
kfree(bus);
- pci_set_drvdata(dev, NULL);
}
#ifdef CONFIG_PM_SLEEP
@@ -270,7 +269,7 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend,
#endif /* CONFIG_PM_SLEEP */
-static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+static const struct pci_device_id bcma_pci_bridge_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
index e15430a..34ea4c5 100644
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -78,18 +78,6 @@ static u16 bcma_cc_core_id(struct bcma_bus *bus)
return BCMA_CORE_CHIPCOMMON;
}
-struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid)
-{
- struct bcma_device *core;
-
- list_for_each_entry(core, &bus->cores, list) {
- if (core->id.id == coreid)
- return core;
- }
- return NULL;
-}
-EXPORT_SYMBOL_GPL(bcma_find_core);
-
struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
u8 unit)
{
@@ -101,6 +89,7 @@ struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
}
return NULL;
}
+EXPORT_SYMBOL_GPL(bcma_find_core_unit);
bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
int timeout)
@@ -176,6 +165,7 @@ static int bcma_register_cores(struct bcma_bus *bus)
bcma_err(bus,
"Could not register dev for core 0x%03X\n",
core->id.id);
+ put_device(&core->dev);
continue;
}
core->dev_registered = true;
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index dceb85f..106d1d8 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -83,6 +83,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x04CA, 0x3005) },
{ USB_DEVICE(0x04CA, 0x3006) },
{ USB_DEVICE(0x04CA, 0x3008) },
+ { USB_DEVICE(0x04CA, 0x300b) },
{ USB_DEVICE(0x13d3, 0x3362) },
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0CF3, 0xE005) },
@@ -97,6 +98,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x0cf3, 0x3121) },
{ USB_DEVICE(0x0cf3, 0xe003) },
+ { USB_DEVICE(0x0489, 0xe05f) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -126,6 +128,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
@@ -140,6 +143,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index f9d1833..7399303 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -23,8 +23,6 @@
#include <linux/bitops.h>
#include <linux/slab.h>
#include <net/bluetooth/bluetooth.h>
-#include <linux/ctype.h>
-#include <linux/firmware.h>
#define BTM_HEADER_LEN 4
#define BTM_UPLD_SIZE 2312
@@ -43,8 +41,6 @@ struct btmrvl_thread {
struct btmrvl_device {
void *card;
struct hci_dev *hcidev;
- struct device *dev;
- const char *cal_data;
u8 dev_type;
@@ -90,12 +86,12 @@ struct btmrvl_private {
#define MRVL_VENDOR_PKT 0xFE
-/* Bluetooth commands */
-#define BT_CMD_AUTO_SLEEP_MODE 0x23
-#define BT_CMD_HOST_SLEEP_CONFIG 0x59
-#define BT_CMD_HOST_SLEEP_ENABLE 0x5A
-#define BT_CMD_MODULE_CFG_REQ 0x5B
-#define BT_CMD_LOAD_CONFIG_DATA 0x61
+/* Vendor specific Bluetooth commands */
+#define BT_CMD_AUTO_SLEEP_MODE 0xFC23
+#define BT_CMD_HOST_SLEEP_CONFIG 0xFC59
+#define BT_CMD_HOST_SLEEP_ENABLE 0xFC5A
+#define BT_CMD_MODULE_CFG_REQ 0xFC5B
+#define BT_CMD_LOAD_CONFIG_DATA 0xFC61
/* Sub-commands: Module Bringup/Shutdown Request/Response */
#define MODULE_BRINGUP_REQ 0xF1
@@ -104,6 +100,11 @@ struct btmrvl_private {
#define MODULE_SHUTDOWN_REQ 0xF2
+/* Vendor specific Bluetooth events */
+#define BT_EVENT_AUTO_SLEEP_MODE 0x23
+#define BT_EVENT_HOST_SLEEP_CONFIG 0x59
+#define BT_EVENT_HOST_SLEEP_ENABLE 0x5A
+#define BT_EVENT_MODULE_CFG_REQ 0x5B
#define BT_EVENT_POWER_STATE 0x20
/* Bluetooth Power States */
@@ -111,8 +112,6 @@ struct btmrvl_private {
#define BT_PS_DISABLE 0x03
#define BT_PS_SLEEP 0x01
-#define OGF 0x3F
-
/* Host Sleep states */
#define HS_ACTIVATED 0x01
#define HS_DEACTIVATED 0x00
@@ -121,7 +120,7 @@ struct btmrvl_private {
#define PS_SLEEP 0x01
#define PS_AWAKE 0x00
-#define BT_CMD_DATA_SIZE 32
+#define BT_CAL_HDR_LEN 4
#define BT_CAL_DATA_SIZE 28
struct btmrvl_event {
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 5cf31c4..1e0320a 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -19,7 +19,7 @@
**/
#include <linux/module.h>
-
+#include <linux/of.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -50,12 +50,10 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
if (hdr->evt == HCI_EV_CMD_COMPLETE) {
struct hci_ev_cmd_complete *ec;
- u16 opcode, ocf, ogf;
+ u16 opcode;
ec = (void *) (skb->data + HCI_EVENT_HDR_SIZE);
opcode = __le16_to_cpu(ec->opcode);
- ocf = hci_opcode_ocf(opcode);
- ogf = hci_opcode_ogf(opcode);
if (priv->btmrvl_dev.sendcmdflag) {
priv->btmrvl_dev.sendcmdflag = false;
@@ -63,9 +61,8 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb)
wake_up_interruptible(&priv->adapter->cmd_wait_q);
}
- if (ogf == OGF) {
- BT_DBG("vendor event skipped: ogf 0x%4.4x ocf 0x%4.4x",
- ogf, ocf);
+ if (hci_opcode_ogf(opcode) == 0x3F) {
+ BT_DBG("vendor event skipped: opcode=%#4.4x", opcode);
kfree_skb(skb);
return false;
}
@@ -89,7 +86,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
}
switch (event->data[0]) {
- case BT_CMD_AUTO_SLEEP_MODE:
+ case BT_EVENT_AUTO_SLEEP_MODE:
if (!event->data[2]) {
if (event->data[1] == BT_PS_ENABLE)
adapter->psmode = 1;
@@ -102,7 +99,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
}
break;
- case BT_CMD_HOST_SLEEP_CONFIG:
+ case BT_EVENT_HOST_SLEEP_CONFIG:
if (!event->data[3])
BT_DBG("gpio=%x, gap=%x", event->data[1],
event->data[2]);
@@ -110,7 +107,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
BT_DBG("HSCFG command failed");
break;
- case BT_CMD_HOST_SLEEP_ENABLE:
+ case BT_EVENT_HOST_SLEEP_ENABLE:
if (!event->data[1]) {
adapter->hs_state = HS_ACTIVATED;
if (adapter->psmode)
@@ -121,7 +118,7 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb)
}
break;
- case BT_CMD_MODULE_CFG_REQ:
+ case BT_EVENT_MODULE_CFG_REQ:
if (priv->btmrvl_dev.sendcmdflag &&
event->data[1] == MODULE_BRINGUP_REQ) {
BT_DBG("EVENT:%s",
@@ -166,7 +163,7 @@ exit:
}
EXPORT_SYMBOL_GPL(btmrvl_process_event);
-static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no,
+static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 opcode,
const void *param, u8 len)
{
struct sk_buff *skb;
@@ -179,7 +176,7 @@ static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no,
}
hdr = (struct hci_command_hdr *)skb_put(skb, HCI_COMMAND_HDR_SIZE);
- hdr->opcode = cpu_to_le16(hci_opcode_pack(OGF, cmd_no));
+ hdr->opcode = cpu_to_le16(opcode);
hdr->plen = len;
if (len)
@@ -417,127 +414,62 @@ static int btmrvl_open(struct hci_dev *hdev)
return 0;
}
-/*
- * This function parses provided calibration data input. It should contain
- * hex bytes separated by space or new line character. Here is an example.
- * 00 1C 01 37 FF FF FF FF 02 04 7F 01
- * CE BA 00 00 00 2D C6 C0 00 00 00 00
- * 00 F0 00 00
- */
-static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size)
+static int btmrvl_download_cal_data(struct btmrvl_private *priv,
+ u8 *data, int len)
{
- const u8 *s = src;
- u8 *d = dst;
int ret;
- u8 tmp[3];
-
- tmp[2] = '\0';
- while ((s - src) <= len - 2) {
- if (isspace(*s)) {
- s++;
- continue;
- }
-
- if (isxdigit(*s)) {
- if ((d - dst) >= dst_size) {
- BT_ERR("calibration data file too big!!!");
- return -EINVAL;
- }
-
- memcpy(tmp, s, 2);
-
- ret = kstrtou8(tmp, 16, d++);
- if (ret < 0)
- return ret;
-
- s += 2;
- } else {
- return -EINVAL;
- }
- }
- if (d == dst)
- return -EINVAL;
-
- return 0;
-}
-
-static int btmrvl_load_cal_data(struct btmrvl_private *priv,
- u8 *config_data)
-{
- int i, ret;
- u8 data[BT_CMD_DATA_SIZE];
data[0] = 0x00;
data[1] = 0x00;
data[2] = 0x00;
- data[3] = BT_CMD_DATA_SIZE - 4;
-
- /* Swap cal-data bytes. Each four bytes are swapped. Considering 4
- * byte SDIO header offset, mapping of input and output bytes will be
- * {3, 2, 1, 0} -> {0+4, 1+4, 2+4, 3+4},
- * {7, 6, 5, 4} -> {4+4, 5+4, 6+4, 7+4} */
- for (i = 4; i < BT_CMD_DATA_SIZE; i++)
- data[i] = config_data[(i / 4) * 8 - 1 - i];
+ data[3] = len;
print_hex_dump_bytes("Calibration data: ",
- DUMP_PREFIX_OFFSET, data, BT_CMD_DATA_SIZE);
+ DUMP_PREFIX_OFFSET, data, BT_CAL_HDR_LEN + len);
ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data,
- BT_CMD_DATA_SIZE);
+ BT_CAL_HDR_LEN + len);
if (ret)
BT_ERR("Failed to download caibration data\n");
return 0;
}
-static int
-btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size)
+static int btmrvl_cal_data_dt(struct btmrvl_private *priv)
{
- u8 cal_data[BT_CAL_DATA_SIZE];
+ struct device_node *dt_node;
+ u8 cal_data[BT_CAL_HDR_LEN + BT_CAL_DATA_SIZE];
+ const char name[] = "btmrvl_caldata";
+ const char property[] = "btmrvl,caldata";
int ret;
- ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data));
+ dt_node = of_find_node_by_name(NULL, name);
+ if (!dt_node)
+ return -ENODEV;
+
+ ret = of_property_read_u8_array(dt_node, property,
+ cal_data + BT_CAL_HDR_LEN,
+ BT_CAL_DATA_SIZE);
if (ret)
return ret;
- ret = btmrvl_load_cal_data(priv, cal_data);
+ BT_DBG("Use cal data from device tree");
+ ret = btmrvl_download_cal_data(priv, cal_data, BT_CAL_DATA_SIZE);
if (ret) {
- BT_ERR("Fail to load calibrate data");
+ BT_ERR("Fail to download calibrate data");
return ret;
}
return 0;
}
-static int btmrvl_cal_data_config(struct btmrvl_private *priv)
-{
- const struct firmware *cfg;
- int ret;
- const char *cal_data = priv->btmrvl_dev.cal_data;
-
- if (!cal_data)
- return 0;
-
- ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev);
- if (ret < 0) {
- BT_DBG("Failed to get %s file, skipping cal data download",
- cal_data);
- return 0;
- }
-
- ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size);
- release_firmware(cfg);
- return ret;
-}
-
static int btmrvl_setup(struct hci_dev *hdev)
{
struct btmrvl_private *priv = hci_get_drvdata(hdev);
btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
- if (btmrvl_cal_data_config(priv))
- BT_ERR("Set cal data failed");
+ btmrvl_cal_data_dt(priv);
priv->btmrvl_dev.psmode = 1;
btmrvl_enable_ps(priv);
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index fabcf5b..1b52c9f 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -18,6 +18,7 @@
* this warranty disclaimer.
**/
+#include <linux/firmware.h>
#include <linux/slab.h>
#include <linux/mmc/sdio_ids.h>
@@ -101,7 +102,6 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
.helper = "mrvl/sd8688_helper.bin",
.firmware = "mrvl/sd8688.bin",
- .cal_data = NULL,
.reg = &btmrvl_reg_8688,
.sd_blksz_fw_dl = 64,
};
@@ -109,7 +109,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
.helper = NULL,
.firmware = "mrvl/sd8787_uapsta.bin",
- .cal_data = NULL,
.reg = &btmrvl_reg_87xx,
.sd_blksz_fw_dl = 256,
};
@@ -117,7 +116,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
.helper = NULL,
.firmware = "mrvl/sd8797_uapsta.bin",
- .cal_data = "mrvl/sd8797_caldata.conf",
.reg = &btmrvl_reg_87xx,
.sd_blksz_fw_dl = 256,
};
@@ -125,7 +123,6 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = {
.helper = NULL,
.firmware = "mrvl/sd8897_uapsta.bin",
- .cal_data = NULL,
.reg = &btmrvl_reg_88xx,
.sd_blksz_fw_dl = 256,
};
@@ -1007,7 +1004,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
struct btmrvl_sdio_device *data = (void *) id->driver_data;
card->helper = data->helper;
card->firmware = data->firmware;
- card->cal_data = data->cal_data;
card->reg = data->reg;
card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
}
@@ -1036,8 +1032,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
}
card->priv = priv;
- priv->btmrvl_dev.dev = &card->func->dev;
- priv->btmrvl_dev.cal_data = card->cal_data;
/* Initialize the interface specific function pointers */
priv->hw_host_to_card = btmrvl_sdio_host_to_card;
@@ -1220,5 +1214,4 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
MODULE_FIRMWARE("mrvl/sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
-MODULE_FIRMWARE("mrvl/sd8797_caldata.conf");
MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 6872d9e..43d35a6 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -85,7 +85,6 @@ struct btmrvl_sdio_card {
u32 ioport;
const char *helper;
const char *firmware;
- const char *cal_data;
const struct btmrvl_sdio_card_reg *reg;
u16 sd_blksz_fw_dl;
u8 rx_unit;
@@ -95,7 +94,6 @@ struct btmrvl_sdio_card {
struct btmrvl_sdio_device {
const char *helper;
const char *firmware;
- const char *cal_data;
const struct btmrvl_sdio_card_reg *reg;
u16 sd_blksz_fw_dl;
};
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index b61440a..83f6437 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -73,6 +73,7 @@ struct btsdio_data {
#define REG_CL_INTRD 0x13 /* Interrupt Clear */
#define REG_EN_INTRD 0x14 /* Interrupt Enable */
#define REG_MD_STAT 0x20 /* Bluetooth Mode Status */
+#define REG_MD_SET 0x20 /* Bluetooth Mode Set */
static int btsdio_tx_packet(struct btsdio_data *data, struct sk_buff *skb)
{
@@ -212,7 +213,7 @@ static int btsdio_open(struct hci_dev *hdev)
}
if (data->func->class == SDIO_CLASS_BT_B)
- sdio_writeb(data->func, 0x00, REG_MD_STAT, NULL);
+ sdio_writeb(data->func, 0x00, REG_MD_SET, NULL);
sdio_writeb(data->func, 0x01, REG_EN_INTRD, NULL);
@@ -333,6 +334,9 @@ static int btsdio_probe(struct sdio_func *func,
hdev->flush = btsdio_flush;
hdev->send = btsdio_send_frame;
+ if (func->vendor == 0x0104 && func->device == 0x00c5)
+ set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
err = hci_register_dev(hdev);
if (err < 0) {
hci_free_dev(hdev);
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3980fd1..baeaaed 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -150,6 +150,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
@@ -164,6 +165,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -224,6 +226,7 @@ static const struct usb_device_id blacklist_table[] = {
/* Intel Bluetooth device */
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
+ { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
{ } /* Terminating entry */
};
@@ -962,6 +965,45 @@ static int btusb_setup_bcm92035(struct hci_dev *hdev)
return 0;
}
+static int btusb_setup_csr(struct hci_dev *hdev)
+{
+ struct hci_rp_read_local_version *rp;
+ struct sk_buff *skb;
+ int ret;
+
+ BT_DBG("%s", hdev->name);
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("Reading local version failed (%ld)", -PTR_ERR(skb));
+ return -PTR_ERR(skb);
+ }
+
+ rp = (struct hci_rp_read_local_version *) skb->data;
+
+ if (!rp->status) {
+ if (le16_to_cpu(rp->manufacturer) != 10) {
+ /* Clear the reset quirk since this is not an actual
+ * early Bluetooth 1.1 device from CSR.
+ */
+ clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+ /* These fake CSR controllers have all a broken
+ * stored link key handling and so just disable it.
+ */
+ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY,
+ &hdev->quirks);
+ }
+ }
+
+ ret = -bt_to_errno(rp->status);
+
+ kfree_skb(skb);
+
+ return ret;
+}
+
struct intel_version {
u8 status;
u8 hw_platform;
@@ -1436,8 +1478,10 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_BCM92035)
hdev->setup = btusb_setup_bcm92035;
- if (id->driver_info & BTUSB_INTEL)
+ if (id->driver_info & BTUSB_INTEL) {
+ usb_enable_autosuspend(data->udev);
hdev->setup = btusb_setup_intel;
+ }
/* Interface numbers are hardcoded in the specification */
data->isoc = usb_ifnum_to_if(data->udev, 1);
@@ -1460,10 +1504,15 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_CSR) {
struct usb_device *udev = data->udev;
+ u16 bcdDevice = le16_to_cpu(udev->descriptor.bcdDevice);
/* Old firmware would otherwise execute USB reset */
- if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117)
+ if (bcdDevice < 0x117)
set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+
+ /* Fake CSR devices with broken commands */
+ if (bcdDevice <= 0x100)
+ hdev->setup = btusb_setup_csr;
}
if (id->driver_info & BTUSB_SNIFFER) {
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 7b16738..1ef6990 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -141,22 +141,28 @@ static int vhci_create_device(struct vhci_data *data, __u8 dev_type)
}
static inline ssize_t vhci_get_user(struct vhci_data *data,
- const char __user *buf, size_t count)
+ const struct iovec *iov,
+ unsigned long count)
{
+ size_t len = iov_length(iov, count);
struct sk_buff *skb;
__u8 pkt_type, dev_type;
+ unsigned long i;
int ret;
- if (count < 2 || count > HCI_MAX_FRAME_SIZE)
+ if (len < 2 || len > HCI_MAX_FRAME_SIZE)
return -EINVAL;
- skb = bt_skb_alloc(count, GFP_KERNEL);
+ skb = bt_skb_alloc(len, GFP_KERNEL);
if (!skb)
return -ENOMEM;
- if (copy_from_user(skb_put(skb, count), buf, count)) {
- kfree_skb(skb);
- return -EFAULT;
+ for (i = 0; i < count; i++) {
+ if (copy_from_user(skb_put(skb, iov[i].iov_len),
+ iov[i].iov_base, iov[i].iov_len)) {
+ kfree_skb(skb);
+ return -EFAULT;
+ }
}
pkt_type = *((__u8 *) skb->data);
@@ -205,7 +211,7 @@ static inline ssize_t vhci_get_user(struct vhci_data *data,
return -EINVAL;
}
- return (ret < 0) ? ret : count;
+ return (ret < 0) ? ret : len;
}
static inline ssize_t vhci_put_user(struct vhci_data *data,
@@ -272,12 +278,13 @@ static ssize_t vhci_read(struct file *file,
return ret;
}
-static ssize_t vhci_write(struct file *file,
- const char __user *buf, size_t count, loff_t *pos)
+static ssize_t vhci_write(struct kiocb *iocb, const struct iovec *iov,
+ unsigned long count, loff_t pos)
{
+ struct file *file = iocb->ki_filp;
struct vhci_data *data = file->private_data;
- return vhci_get_user(data, buf, count);
+ return vhci_get_user(data, iov, count);
}
static unsigned int vhci_poll(struct file *file, poll_table *wait)
@@ -342,7 +349,7 @@ static int vhci_release(struct inode *inode, struct file *file)
static const struct file_operations vhci_fops = {
.owner = THIS_MODULE,
.read = vhci_read,
- .write = vhci_write,
+ .aio_write = vhci_write,
.poll = vhci_poll,
.open = vhci_open,
.release = vhci_release,
diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c
index 9b079a7..199958d 100644
--- a/drivers/infiniband/core/cma.c
+++ b/drivers/infiniband/core/cma.c
@@ -2357,7 +2357,7 @@ static int cma_alloc_any_port(struct idr *ps, struct rdma_id_private *id_priv)
inet_get_local_port_range(&init_net, &low, &high);
remaining = (high - low) + 1;
- rover = net_random() % remaining + low;
+ rover = prandom_u32() % remaining + low;
retry:
if (last_used_port != rover &&
!idr_find(ps, (unsigned short) rover)) {
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 8b98d53..d9aebbc 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1371,7 +1371,7 @@ isdn_net_type_trans(struct sk_buff *skb, struct net_device *dev)
eth = eth_hdr(skb);
if (*eth->h_dest & 1) {
- if (memcmp(eth->h_dest, dev->broadcast, ETH_ALEN) == 0)
+ if (ether_addr_equal(eth->h_dest, dev->broadcast))
skb->pkt_type = PACKET_BROADCAST;
else
skb->pkt_type = PACKET_MULTICAST;
@@ -1382,7 +1382,7 @@ isdn_net_type_trans(struct sk_buff *skb, struct net_device *dev)
*/
else if (dev->flags & (IFF_PROMISC /*| IFF_ALLMULTI*/)) {
- if (memcmp(eth->h_dest, dev->dev_addr, ETH_ALEN))
+ if (!ether_addr_equal(eth->h_dest, dev->dev_addr))
skb->pkt_type = PACKET_OTHERHOST;
}
if (ntohs(eth->h_proto) >= ETH_P_802_3_MIN)
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index 5cefb47..1be8228 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -135,7 +135,7 @@ mISDN_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
return err;
if (msg->msg_name) {
- struct sockaddr_mISDN *maddr = msg->msg_name;
+ DECLARE_SOCKADDR(struct sockaddr_mISDN *, maddr, msg->msg_name);
maddr->family = AF_ISDN;
maddr->dev = _pms(sk)->dev->id;
@@ -179,7 +179,6 @@ mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
struct sock *sk = sock->sk;
struct sk_buff *skb;
int err = -ENOMEM;
- struct sockaddr_mISDN *maddr;
if (*debug & DEBUG_SOCKET)
printk(KERN_DEBUG "%s: len %d flags %x ch %d proto %x\n",
@@ -214,7 +213,7 @@ mISDN_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
if (msg->msg_namelen >= sizeof(struct sockaddr_mISDN)) {
/* if we have a address, we use it */
- maddr = (struct sockaddr_mISDN *)msg->msg_name;
+ DECLARE_SOCKADDR(struct sockaddr_mISDN *, maddr, msg->msg_name);
mISDN_HEAD_ID(skb) = maddr->channel;
} else { /* use default for L2 messages */
if ((sk->sk_protocol == ISDN_P_LAPD_TE) ||
diff --git a/drivers/isdn/sc/event.c b/drivers/isdn/sc/event.c
index 717003a..833d96c 100644
--- a/drivers/isdn/sc/event.c
+++ b/drivers/isdn/sc/event.c
@@ -57,7 +57,7 @@ int indicate_status(int card, int event, ulong Channel, char *Data)
memcpy(&cmd.parm.setup, Data, sizeof(cmd.parm.setup));
break;
default:
- strcpy(cmd.parm.num, Data);
+ strlcpy(cmd.parm.num, Data, sizeof(cmd.parm.num));
}
}
diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c
index f91c80c..8a86b30 100644
--- a/drivers/media/dvb-core/dvb_net.c
+++ b/drivers/media/dvb-core/dvb_net.c
@@ -179,7 +179,7 @@ static __be16 dvb_net_eth_type_trans(struct sk_buff *skb,
eth = eth_hdr(skb);
if (*eth->h_dest & 1) {
- if(memcmp(eth->h_dest,dev->broadcast, ETH_ALEN)==0)
+ if(ether_addr_equal(eth->h_dest,dev->broadcast))
skb->pkt_type=PACKET_BROADCAST;
else
skb->pkt_type=PACKET_MULTICAST;
@@ -674,11 +674,13 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
if (priv->rx_mode != RX_MODE_PROMISC) {
if (priv->ule_skb->data[0] & 0x01) {
/* multicast or broadcast */
- if (memcmp(priv->ule_skb->data, bc_addr, ETH_ALEN)) {
+ if (!ether_addr_equal(priv->ule_skb->data, bc_addr)) {
/* multicast */
if (priv->rx_mode == RX_MODE_MULTI) {
int i;
- for(i = 0; i < priv->multi_num && memcmp(priv->ule_skb->data, priv->multi_macs[i], ETH_ALEN); i++)
+ for(i = 0; i < priv->multi_num &&
+ !ether_addr_equal(priv->ule_skb->data,
+ priv->multi_macs[i]); i++)
;
if (i == priv->multi_num)
drop = 1;
@@ -688,7 +690,7 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len )
}
/* else: broadcast */
}
- else if (memcmp(priv->ule_skb->data, dev->dev_addr, ETH_ALEN))
+ else if (!ether_addr_equal(priv->ule_skb->data, dev->dev_addr))
drop = 1;
/* else: destination address matches the MAC address of our receiver device */
}
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b45b240..f342278 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -236,6 +236,7 @@ config VETH
config VIRTIO_NET
tristate "Virtio network driver"
depends on VIRTIO
+ select AVERAGE
---help---
This is the virtual network driver for virtio. It can be used with
lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index a7271e0..67977f1 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -32,39 +32,12 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/netlink.h>
+#include <net/Space.h>
/* A unified ethernet device probe. This is the easiest way to have every
ethernet adaptor have the name "eth[0123...]".
*/
-extern struct net_device *hp100_probe(int unit);
-extern struct net_device *ultra_probe(int unit);
-extern struct net_device *wd_probe(int unit);
-extern struct net_device *ne_probe(int unit);
-extern struct net_device *fmv18x_probe(int unit);
-extern struct net_device *i82596_probe(int unit);
-extern struct net_device *ni65_probe(int unit);
-extern struct net_device *sonic_probe(int unit);
-extern struct net_device *smc_init(int unit);
-extern struct net_device *atarilance_probe(int unit);
-extern struct net_device *sun3lance_probe(int unit);
-extern struct net_device *sun3_82586_probe(int unit);
-extern struct net_device *apne_probe(int unit);
-extern struct net_device *cs89x0_probe(int unit);
-extern struct net_device *mvme147lance_probe(int unit);
-extern struct net_device *tc515_probe(int unit);
-extern struct net_device *lance_probe(int unit);
-extern struct net_device *mac8390_probe(int unit);
-extern struct net_device *mac89x0_probe(int unit);
-extern struct net_device *cops_probe(int unit);
-extern struct net_device *ltpc_probe(void);
-
-/* Fibre Channel adapters */
-extern int iph5526_probe(struct net_device *dev);
-
-/* SBNI adapters */
-extern int sbni_probe(int unit);
-
struct devprobe2 {
struct net_device *(*probe)(int unit);
int status; /* non-zero if autoprobe has failed */
diff --git a/drivers/net/arcnet/com20020_cs.c b/drivers/net/arcnet/com20020_cs.c
index 74dc187..326a612 100644
--- a/drivers/net/arcnet/com20020_cs.c
+++ b/drivers/net/arcnet/com20020_cs.c
@@ -32,7 +32,6 @@
* **********************
*/
#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
diff --git a/drivers/net/bonding/Makefile b/drivers/net/bonding/Makefile
index 5a5d720..6f4e808 100644
--- a/drivers/net/bonding/Makefile
+++ b/drivers/net/bonding/Makefile
@@ -4,7 +4,7 @@
obj-$(CONFIG_BONDING) += bonding.o
-bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o bond_debugfs.o bond_netlink.o bond_options.o
+bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o bond_sysfs_slave.o bond_debugfs.o bond_netlink.o bond_options.o
proc-$(CONFIG_PROC_FS) += bond_procfs.o
bonding-objs += $(proc-y)
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 4ced594..cce1f1b 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -34,14 +34,14 @@
#include "bonding.h"
#include "bond_3ad.h"
-// General definitions
+/* General definitions */
#define AD_SHORT_TIMEOUT 1
#define AD_LONG_TIMEOUT 0
#define AD_STANDBY 0x2
#define AD_MAX_TX_IN_SECOND 3
#define AD_COLLECTOR_MAX_DELAY 0
-// Timer definitions(43.4.4 in the 802.3ad standard)
+/* Timer definitions (43.4.4 in the 802.3ad standard) */
#define AD_FAST_PERIODIC_TIME 1
#define AD_SLOW_PERIODIC_TIME 30
#define AD_SHORT_TIMEOUT_TIME (3*AD_FAST_PERIODIC_TIME)
@@ -49,7 +49,7 @@
#define AD_CHURN_DETECTION_TIME 60
#define AD_AGGREGATE_WAIT_TIME 2
-// Port state definitions(43.4.2.2 in the 802.3ad standard)
+/* Port state definitions (43.4.2.2 in the 802.3ad standard) */
#define AD_STATE_LACP_ACTIVITY 0x1
#define AD_STATE_LACP_TIMEOUT 0x2
#define AD_STATE_AGGREGATION 0x4
@@ -59,7 +59,9 @@
#define AD_STATE_DEFAULTED 0x40
#define AD_STATE_EXPIRED 0x80
-// Port Variables definitions used by the State Machines(43.4.7 in the 802.3ad standard)
+/* Port Variables definitions used by the State Machines (43.4.7 in the
+ * 802.3ad standard)
+ */
#define AD_PORT_BEGIN 0x1
#define AD_PORT_LACP_ENABLED 0x2
#define AD_PORT_ACTOR_CHURN 0x4
@@ -71,27 +73,27 @@
#define AD_PORT_SELECTED 0x100
#define AD_PORT_MOVED 0x200
-// Port Key definitions
-// key is determined according to the link speed, duplex and
-// user key(which is yet not supported)
-// ------------------------------------------------------------
-// Port key : | User key | Speed |Duplex|
-// ------------------------------------------------------------
-// 16 6 1 0
+/* Port Key definitions
+ * key is determined according to the link speed, duplex and
+ * user key (which is yet not supported)
+ * --------------------------------------------------------------
+ * Port key : | User key | Speed | Duplex |
+ * --------------------------------------------------------------
+ * 16 6 1 0
+ */
#define AD_DUPLEX_KEY_BITS 0x1
#define AD_SPEED_KEY_BITS 0x3E
#define AD_USER_KEY_BITS 0xFFC0
-//dalloun
#define AD_LINK_SPEED_BITMASK_1MBPS 0x1
#define AD_LINK_SPEED_BITMASK_10MBPS 0x2
#define AD_LINK_SPEED_BITMASK_100MBPS 0x4
#define AD_LINK_SPEED_BITMASK_1000MBPS 0x8
#define AD_LINK_SPEED_BITMASK_10000MBPS 0x10
-//endalloun
-// compare MAC addresses
-#define MAC_ADDRESS_COMPARE(A, B) memcmp(A, B, ETH_ALEN)
+/* compare MAC addresses */
+#define MAC_ADDRESS_EQUAL(A, B) \
+ ether_addr_equal_64bits((const u8 *)A, (const u8 *)B)
static struct mac_addr null_mac_addr = { { 0, 0, 0, 0, 0, 0 } };
static u16 ad_ticks_per_sec;
@@ -99,7 +101,7 @@ static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
static const u8 lacpdu_mcast_addr[ETH_ALEN] = MULTICAST_LACPDU_ADDR;
-// ================= main 802.3ad protocol functions ==================
+/* ================= main 802.3ad protocol functions ================== */
static int ad_lacpdu_send(struct port *port);
static int ad_marker_send(struct port *port, struct bond_marker *marker);
static void ad_mux_machine(struct port *port);
@@ -113,13 +115,13 @@ static void ad_initialize_agg(struct aggregator *aggregator);
static void ad_initialize_port(struct port *port, int lacp_fast);
static void ad_enable_collecting_distributing(struct port *port);
static void ad_disable_collecting_distributing(struct port *port);
-static void ad_marker_info_received(struct bond_marker *marker_info, struct port *port);
-static void ad_marker_response_received(struct bond_marker *marker, struct port *port);
+static void ad_marker_info_received(struct bond_marker *marker_info,
+ struct port *port);
+static void ad_marker_response_received(struct bond_marker *marker,
+ struct port *port);
-/////////////////////////////////////////////////////////////////////////////////
-// ================= api to bonding and kernel code ==================
-/////////////////////////////////////////////////////////////////////////////////
+/* ================= api to bonding and kernel code ================== */
/**
* __get_bond_by_port - get the port's bonding struct
@@ -141,25 +143,32 @@ static inline struct bonding *__get_bond_by_port(struct port *port)
*
* Return the aggregator of the first slave in @bond, or %NULL if it can't be
* found.
+ * The caller must hold RCU or RTNL lock.
*/
static inline struct aggregator *__get_first_agg(struct port *port)
{
struct bonding *bond = __get_bond_by_port(port);
struct slave *first_slave;
+ struct aggregator *agg;
- // If there's no bond for this port, or bond has no slaves
+ /* If there's no bond for this port, or bond has no slaves */
if (bond == NULL)
return NULL;
- first_slave = bond_first_slave(bond);
- return first_slave ? &(SLAVE_AD_INFO(first_slave).aggregator) : NULL;
+ rcu_read_lock();
+ first_slave = bond_first_slave_rcu(bond);
+ agg = first_slave ? &(SLAVE_AD_INFO(first_slave).aggregator) : NULL;
+ rcu_read_unlock();
+
+ return agg;
}
-/*
- * __agg_has_partner
+/**
+ * __agg_has_partner - see if we have a partner
+ * @agg: the agregator we're looking at
*
* Return nonzero if aggregator has a partner (denoted by a non-zero ether
- * address for the partner). Return 0 if not.
+ * address for the partner). Return 0 if not.
*/
static inline int __agg_has_partner(struct aggregator *agg)
{
@@ -169,7 +178,6 @@ static inline int __agg_has_partner(struct aggregator *agg)
/**
* __disable_port - disable the port's slave
* @port: the port we're looking at
- *
*/
static inline void __disable_port(struct port *port)
{
@@ -179,7 +187,6 @@ static inline void __disable_port(struct port *port)
/**
* __enable_port - enable the port's slave, if it's up
* @port: the port we're looking at
- *
*/
static inline void __enable_port(struct port *port)
{
@@ -192,7 +199,6 @@ static inline void __enable_port(struct port *port)
/**
* __port_is_enabled - check if the port's slave is in active state
* @port: the port we're looking at
- *
*/
static inline int __port_is_enabled(struct