aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/laptops/disk-shock-protection.txt149
-rw-r--r--Documentation/pcmcia/driver-changes.txt6
-rw-r--r--Documentation/video4linux/CARDLIST.bttv1
-rw-r--r--Documentation/video4linux/CARDLIST.cx238852
-rw-r--r--Documentation/video4linux/CARDLIST.cx888
-rw-r--r--Documentation/video4linux/CARDLIST.em28xx4
-rw-r--r--Documentation/video4linux/CARDLIST.saa71348
-rw-r--r--Documentation/video4linux/CARDLIST.tuner1
-rw-r--r--Documentation/video4linux/gspca.txt28
-rw-r--r--Documentation/video4linux/m5602.txt12
-rw-r--r--Documentation/video4linux/soc-camera.txt120
-rw-r--r--MAINTAINERS2
-rw-r--r--arch/arm/mach-pxa/include/mach/camera.h2
-rw-r--r--arch/m68k/Kconfig60
-rw-r--r--arch/m68k/amiga/config.c9
-rw-r--r--arch/m68k/atari/Makefile3
-rw-r--r--arch/m68k/atari/ataints.c6
-rw-r--r--arch/m68k/atari/atakeyb.c12
-rw-r--r--arch/m68k/atari/config.c37
-rw-r--r--arch/m68k/atari/hades-pci.c440
-rw-r--r--arch/m68k/atari/time.c38
-rw-r--r--arch/m68k/bvme6000/config.c15
-rw-r--r--arch/m68k/bvme6000/rtc.c30
-rw-r--r--arch/m68k/kernel/Makefile1
-rw-r--r--arch/m68k/kernel/bios32.c514
-rw-r--r--arch/m68k/kernel/dma.c4
-rw-r--r--arch/m68k/kernel/ints.c3
-rw-r--r--arch/m68k/kernel/process.c2
-rw-r--r--arch/m68k/kernel/traps.c9
-rw-r--r--arch/m68k/kernel/vmlinux-std.lds9
-rw-r--r--arch/m68k/mm/kmap.c4
-rw-r--r--arch/m68k/mvme16x/rtc.c26
-rw-r--r--arch/m68k/q40/config.c12
-rw-r--r--arch/m68k/sun3x/time.c28
-rw-r--r--arch/mips/include/asm/mach-generic/ide.h29
-rw-r--r--arch/xtensa/kernel/setup.c5
-rw-r--r--drivers/ata/pata_pcmcia.c168
-rw-r--r--drivers/block/ataflop.c4
-rw-r--r--drivers/bluetooth/bluecard_cs.c8
-rw-r--r--drivers/bluetooth/bt3c_cs.c125
-rw-r--r--drivers/bluetooth/btuart_cs.c126
-rw-r--r--drivers/bluetooth/dtl1_cs.c67
-rw-r--r--drivers/char/pcmcia/cm4000_cs.c73
-rw-r--r--drivers/char/pcmcia/cm4040_cs.c80
-rw-r--r--drivers/char/pcmcia/ipwireless/main.c54
-rw-r--r--drivers/char/pcmcia/synclink_cs.c2
-rw-r--r--drivers/char/vt.c5
-rw-r--r--drivers/ide/Kconfig38
-rw-r--r--drivers/ide/Makefile19
-rw-r--r--drivers/ide/arm/icside.c23
-rw-r--r--drivers/ide/h8300/ide-h8300.c2
-rw-r--r--drivers/ide/ide-acpi.c12
-rw-r--r--drivers/ide/ide-atapi.c183
-rw-r--r--drivers/ide/ide-cd.c261
-rw-r--r--drivers/ide/ide-cd.h1
-rw-r--r--drivers/ide/ide-disk.c357
-rw-r--r--drivers/ide/ide-disk.h32
-rw-r--r--drivers/ide/ide-disk_ioctl.c29
-rw-r--r--drivers/ide/ide-disk_proc.c129
-rw-r--r--drivers/ide/ide-dma-sff.c356
-rw-r--r--drivers/ide/ide-dma.c481
-rw-r--r--drivers/ide/ide-floppy.c392
-rw-r--r--drivers/ide/ide-floppy.h19
-rw-r--r--drivers/ide/ide-floppy_ioctl.c56
-rw-r--r--drivers/ide/ide-floppy_proc.c33
-rw-r--r--drivers/ide/ide-generic.c51
-rw-r--r--drivers/ide/ide-io.c237
-rw-r--r--drivers/ide/ide-ioctls.c21
-rw-r--r--drivers/ide/ide-iops.c95
-rw-r--r--drivers/ide/ide-lib.c2
-rw-r--r--drivers/ide/ide-park.c121
-rw-r--r--drivers/ide/ide-probe.c215
-rw-r--r--drivers/ide/ide-proc.c6
-rw-r--r--drivers/ide/ide-tape.c155
-rw-r--r--drivers/ide/ide-taskfile.c128
-rw-r--r--drivers/ide/ide.c135
-rw-r--r--drivers/ide/legacy/ali14xx.c2
-rw-r--r--drivers/ide/legacy/ht6560b.c9
-rw-r--r--drivers/ide/legacy/ide-4drives.c2
-rw-r--r--drivers/ide/legacy/ide-cs.c158
-rw-r--r--drivers/ide/legacy/qd65xx.c2
-rw-r--r--drivers/ide/mips/au1xxx-ide.c34
-rw-r--r--drivers/ide/pci/aec62xx.c8
-rw-r--r--drivers/ide/pci/alim15x3.c15
-rw-r--r--drivers/ide/pci/amd74xx.c8
-rw-r--r--drivers/ide/pci/atiixp.c6
-rw-r--r--drivers/ide/pci/cmd640.c18
-rw-r--r--drivers/ide/pci/cmd64x.c10
-rw-r--r--drivers/ide/pci/cs5520.c4
-rw-r--r--drivers/ide/pci/cs5530.c6
-rw-r--r--drivers/ide/pci/cs5535.c8
-rw-r--r--drivers/ide/pci/cy82c693.c124
-rw-r--r--drivers/ide/pci/delkin_cb.c6
-rw-r--r--drivers/ide/pci/generic.c6
-rw-r--r--drivers/ide/pci/hpt34x.c6
-rw-r--r--drivers/ide/pci/hpt366.c15
-rw-r--r--drivers/ide/pci/it8213.c6
-rw-r--r--drivers/ide/pci/it821x.c46
-rw-r--r--drivers/ide/pci/jmicron.c6
-rw-r--r--drivers/ide/pci/ns87415.c21
-rw-r--r--drivers/ide/pci/opti621.c8
-rw-r--r--drivers/ide/pci/pdc202xx_new.c6
-rw-r--r--drivers/ide/pci/pdc202xx_old.c14
-rw-r--r--drivers/ide/pci/piix.c46
-rw-r--r--drivers/ide/pci/rz1000.c6
-rw-r--r--drivers/ide/pci/sc1200.c12
-rw-r--r--drivers/ide/pci/scc_pata.c29
-rw-r--r--drivers/ide/pci/serverworks.c8
-rw-r--r--drivers/ide/pci/sgiioc4.c59
-rw-r--r--drivers/ide/pci/siimage.c17
-rw-r--r--drivers/ide/pci/sis5513.c6
-rw-r--r--drivers/ide/pci/sl82c105.c8
-rw-r--r--drivers/ide/pci/slc90e66.c6
-rw-r--r--drivers/ide/pci/tc86c001.c8
-rw-r--r--drivers/ide/pci/triflex.c15
-rw-r--r--drivers/ide/pci/trm290.c10
-rw-r--r--drivers/ide/pci/via82cxxx.c6
-rw-r--r--drivers/ide/ppc/pmac.c71
-rw-r--r--drivers/input/misc/hp_sdc_rtc.c10
-rw-r--r--drivers/input/serio/hp_sdc.c2
-rw-r--r--drivers/isdn/hardware/avm/avm_cs.c85
-rw-r--r--drivers/isdn/hisax/avma1_cs.c81
-rw-r--r--drivers/isdn/hisax/elsa_cs.c79
-rw-r--r--drivers/isdn/hisax/sedlbauer_cs.c197
-rw-r--r--drivers/isdn/hisax/teles_cs.c79
-rw-r--r--drivers/isdn/mISDN/dsp_cmx.c4
-rw-r--r--drivers/isdn/mISDN/timerdev.c2
-rw-r--r--drivers/md/Kconfig14
-rw-r--r--drivers/media/common/ir-keymaps.c280
-rw-r--r--drivers/media/common/saa7146_core.c2
-rw-r--r--drivers/media/common/saa7146_fops.c2
-rw-r--r--drivers/media/common/tuners/mt2060.c38
-rw-r--r--drivers/media/common/tuners/mxl5007t.c1
-rw-r--r--drivers/media/common/tuners/tda18271-fe.c1
-rw-r--r--drivers/media/common/tuners/tda827x.c12
-rw-r--r--drivers/media/common/tuners/tda827x.h1
-rw-r--r--drivers/media/common/tuners/tda8290.c4
-rw-r--r--drivers/media/common/tuners/tda8290.h1
-rw-r--r--drivers/media/common/tuners/tda9887.c1
-rw-r--r--drivers/media/common/tuners/tuner-simple.c3
-rw-r--r--drivers/media/common/tuners/tuner-types.c22
-rw-r--r--drivers/media/common/tuners/tuner-xc2028.c74
-rw-r--r--drivers/media/common/tuners/tuner-xc2028.h10
-rw-r--r--drivers/media/common/tuners/xc5000.c109
-rw-r--r--drivers/media/common/tuners/xc5000.h8
-rw-r--r--drivers/media/common/tuners/xc5000_priv.h37
-rw-r--r--drivers/media/dvb/Kconfig5
-rw-r--r--drivers/media/dvb/Makefile2
-rw-r--r--drivers/media/dvb/b2c2/flexcop-dma.c2
-rw-r--r--drivers/media/dvb/bt8xx/dvb-bt8xx.c2
-rw-r--r--drivers/media/dvb/cinergyT2/Kconfig85
-rw-r--r--drivers/media/dvb/cinergyT2/Makefile3
-rw-r--r--drivers/media/dvb/cinergyT2/cinergyT2.c1105
-rw-r--r--drivers/media/dvb/dm1105/Kconfig18
-rw-r--r--drivers/media/dvb/dm1105/Makefile3
-rw-r--r--drivers/media/dvb/dm1105/dm1105.c911
-rw-r--r--drivers/media/dvb/dvb-core/dvb_frontend.c666
-rw-r--r--drivers/media/dvb/dvb-core/dvb_frontend.h32
-rw-r--r--drivers/media/dvb/dvb-usb/Kconfig42
-rw-r--r--drivers/media/dvb/dvb-usb/Makefile10
-rw-r--r--drivers/media/dvb/dvb-usb/af9005-remote.c2
-rw-r--r--drivers/media/dvb/dvb-usb/af9005-script.h2
-rw-r--r--drivers/media/dvb/dvb-usb/af9005.c23
-rw-r--r--drivers/media/dvb/dvb-usb/af9015.c1474
-rw-r--r--drivers/media/dvb/dvb-usb/af9015.h524
-rw-r--r--drivers/media/dvb/dvb-usb/anysee.c30
-rw-r--r--drivers/media/dvb/dvb-usb/cinergyT2-core.c268
-rw-r--r--drivers/media/dvb/dvb-usb/cinergyT2-fe.c351
-rw-r--r--drivers/media/dvb/dvb-usb/cinergyT2.h95
-rw-r--r--drivers/media/dvb/dvb-usb/cxusb.c504
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700.h4
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700_core.c115
-rw-r--r--drivers/media/dvb/dvb-usb/dib0700_devices.c195
-rw-r--r--drivers/media/dvb/dvb-usb/dtv5100.c240
-rw-r--r--drivers/media/dvb/dvb-usb/dtv5100.h51
-rw-r--r--drivers/media/dvb/dvb-usb/dvb-usb-ids.h29
-rw-r--r--drivers/media/dvb/dvb-usb/dw2102.c572
-rw-r--r--drivers/media/dvb/dvb-usb/dw2102.h1
-rw-r--r--drivers/media/dvb/frontends/Kconfig47
-rw-r--r--drivers/media/dvb/frontends/Makefile7
-rw-r--r--drivers/media/dvb/frontends/af9013.c1685
-rw-r--r--drivers/media/dvb/frontends/af9013.h107
-rw-r--r--drivers/media/dvb/frontends/af9013_priv.h869
-rw-r--r--drivers/media/dvb/frontends/au8522.c133
-rw-r--r--drivers/media/dvb/frontends/au8522.h17
-rw-r--r--drivers/media/dvb/frontends/cx24110.h15
-rw-r--r--drivers/media/dvb/frontends/cx24116.c1423
-rw-r--r--drivers/media/dvb/frontends/cx24116.h53
-rw-r--r--drivers/media/dvb/frontends/dib0070.h8
-rw-r--r--drivers/media/dvb/frontends/dib7000m.c6
-rw-r--r--drivers/media/dvb/frontends/dib7000p.c3
-rw-r--r--drivers/media/dvb/frontends/dib7000p.h41
-rw-r--r--drivers/media/dvb/frontends/drx397xD.c288
-rw-r--r--drivers/media/dvb/frontends/drx397xD.h6
-rw-r--r--drivers/media/dvb/frontends/dvb_dummy_fe.c11
-rw-r--r--drivers/media/dvb/frontends/eds1547.h133
-rw-r--r--drivers/media/dvb/frontends/lgs8gl5.c454
-rw-r--r--drivers/media/dvb/frontends/lgs8gl5.h45
-rw-r--r--drivers/media/dvb/frontends/nxt200x.c4
-rw-r--r--drivers/media/dvb/frontends/or51211.c2
-rw-r--r--drivers/media/dvb/frontends/si21xx.c974
-rw-r--r--drivers/media/dvb/frontends/si21xx.h37
-rw-r--r--drivers/media/dvb/frontends/sp887x.c3
-rw-r--r--drivers/media/dvb/frontends/stb6000.c255
-rw-r--r--drivers/media/dvb/frontends/stb6000.h51
-rw-r--r--drivers/media/dvb/frontends/stv0288.c618
-rw-r--r--drivers/media/dvb/frontends/stv0288.h67
-rw-r--r--drivers/media/dvb/frontends/stv0299.c2
-rw-r--r--drivers/media/dvb/frontends/stv0299.h13
-rw-r--r--drivers/media/dvb/frontends/tdhd1.h73
-rw-r--r--drivers/media/dvb/ttpci/Kconfig1
-rw-r--r--drivers/media/dvb/ttpci/av7110.c127
-rw-r--r--drivers/media/dvb/ttpci/av7110.h1
-rw-r--r--drivers/media/dvb/ttpci/av7110_av.c3
-rw-r--r--drivers/media/dvb/ttpci/budget-av.c8
-rw-r--r--drivers/media/dvb/ttpci/budget-ci.c7
-rw-r--r--drivers/media/dvb/ttpci/budget-core.c6
-rw-r--r--drivers/media/dvb/ttpci/budget-patch.c9
-rw-r--r--drivers/media/dvb/ttpci/budget.c25
-rw-r--r--drivers/media/dvb/ttpci/budget.h2
-rw-r--r--drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c2
-rw-r--r--drivers/media/dvb/ttusb-dec/ttusb_dec.c2
-rw-r--r--drivers/media/dvb/ttusb-dec/ttusbdecfe.c16
-rw-r--r--drivers/media/radio/Kconfig12
-rw-r--r--drivers/media/radio/Makefile1
-rw-r--r--drivers/media/radio/dsbr100.c28
-rw-r--r--drivers/media/radio/radio-aimslab.c34
-rw-r--r--drivers/media/radio/radio-aztech.c40
-rw-r--r--drivers/media/radio/radio-cadet.c1
-rw-r--r--drivers/media/radio/radio-gemtek-pci.c42
-rw-r--r--drivers/media/radio/radio-gemtek.c37
-rw-r--r--drivers/media/radio/radio-maestro.c34
-rw-r--r--drivers/media/radio/radio-maxiradio.c40
-rw-r--r--drivers/media/radio/radio-mr800.c628
-rw-r--r--drivers/media/radio/radio-rtrack2.c34
-rw-r--r--drivers/media/radio/radio-sf16fmi.c34
-rw-r--r--drivers/media/radio/radio-sf16fmr2.c34
-rw-r--r--drivers/media/radio/radio-si470x.c24
-rw-r--r--drivers/media/radio/radio-terratec.c34
-rw-r--r--drivers/media/radio/radio-trust.c17
-rw-r--r--drivers/media/radio/radio-typhoon.c35
-rw-r--r--drivers/media/radio/radio-zoltrix.c51
-rw-r--r--drivers/media/video/Kconfig235
-rw-r--r--drivers/media/video/Makefile9
-rw-r--r--drivers/media/video/arv.c29
-rw-r--r--drivers/media/video/au0828/au0828-cards.c2
-rw-r--r--drivers/media/video/au0828/au0828-dvb.c47
-rw-r--r--drivers/media/video/au0828/au0828.h3
-rw-r--r--drivers/media/video/bt856.c8
-rw-r--r--drivers/media/video/bt8xx/bttv-cards.c27
-rw-r--r--drivers/media/video/bt8xx/bttv-driver.c66
-rw-r--r--drivers/media/video/bt8xx/bttv-input.c62
-rw-r--r--drivers/media/video/bt8xx/bttv.h2
-rw-r--r--drivers/media/video/btcx-risc.c2
-rw-r--r--drivers/media/video/bw-qcam.c26
-rw-r--r--drivers/media/video/bw-qcam.h1
-rw-r--r--drivers/media/video/c-qcam.c23
-rw-r--r--drivers/media/video/cafe_ccic.c6
-rw-r--r--drivers/media/video/cpia.c15
-rw-r--r--drivers/media/video/cpia2/cpia2_core.c10
-rw-r--r--drivers/media/video/cpia2/cpia2_usb.c2
-rw-r--r--drivers/media/video/cpia2/cpia2_v4l.c16
-rw-r--r--drivers/media/video/cx18/Makefile2
-rw-r--r--drivers/media/video/cx18/cx18-audio.c5
-rw-r--r--drivers/media/video/cx18/cx18-av-core.c23
-rw-r--r--drivers/media/video/cx18/cx18-av-core.h2
-rw-r--r--drivers/media/video/cx18/cx18-av-firmware.c25
-rw-r--r--drivers/media/video/cx18/cx18-cards.c99
-rw-r--r--drivers/media/video/cx18/cx18-driver.c51
-rw-r--r--drivers/media/video/cx18/cx18-driver.h71
-rw-r--r--drivers/media/video/cx18/cx18-dvb.c5
-rw-r--r--drivers/media/video/cx18/cx18-fileops.c47
-rw-r--r--drivers/media/video/cx18/cx18-firmware.c140
-rw-r--r--drivers/media/video/cx18/cx18-gpio.c17
-rw-r--r--drivers/media/video/cx18/cx18-gpio.h2
-rw-r--r--drivers/media/video/cx18/cx18-i2c.c49
-rw-r--r--drivers/media/video/cx18/cx18-io.c254
-rw-r--r--drivers/media/video/cx18/cx18-io.h378
-rw-r--r--drivers/media/video/cx18/cx18-ioctl.c34
-rw-r--r--drivers/media/video/cx18/cx18-irq.c47
-rw-r--r--drivers/media/video/cx18/cx18-mailbox.c45
-rw-r--r--drivers/media/video/cx18/cx18-queue.c18
-rw-r--r--drivers/media/video/cx18/cx18-scb.c131
-rw-r--r--drivers/media/video/cx18/cx18-streams.c70
-rw-r--r--drivers/media/video/cx18/cx18-version.h2
-rw-r--r--drivers/media/video/cx18/cx23418.h2
-rw-r--r--drivers/media/video/cx2341x.c5
-rw-r--r--drivers/media/video/cx23885/Kconfig1
-rw-r--r--drivers/media/video/cx23885/cx23885-417.c13
-rw-r--r--drivers/media/video/cx23885/cx23885-cards.c86
-rw-r--r--drivers/media/video/cx23885/cx23885-core.c2
-rw-r--r--drivers/media/video/cx23885/cx23885-dvb.c105
-rw-r--r--drivers/media/video/cx23885/cx23885-vbi.c12
-rw-r--r--drivers/media/video/cx23885/cx23885-video.c39
-rw-r--r--drivers/media/video/cx23885/cx23885.h4
-rw-r--r--drivers/media/video/cx25840/cx25840-vbi.c5
-rw-r--r--drivers/media/video/cx88/Kconfig4
-rw-r--r--drivers/media/video/cx88/cx88-blackbird.c9
-rw-r--r--drivers/media/video/cx88/cx88-cards.c306
-rw-r--r--drivers/media/video/cx88/cx88-dvb.c198
-rw-r--r--drivers/media/video/cx88/cx88-i2c.c16
-rw-r--r--drivers/media/video/cx88/cx88-input.c33
-rw-r--r--drivers/media/video/cx88/cx88-video.c15
-rw-r--r--drivers/media/video/cx88/cx88.h11
-rw-r--r--drivers/media/video/dabusb.c3
-rw-r--r--drivers/media/video/dpc7146.c408
-rw-r--r--drivers/media/video/em28xx/em28xx-cards.c4
-rw-r--r--drivers/media/video/em28xx/em28xx-dvb.c25
-rw-r--r--drivers/media/video/em28xx/em28xx-i2c.c35
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c60
-rw-r--r--drivers/media/video/em28xx/em28xx.h6
-rw-r--r--drivers/media/video/et61x251/et61x251_core.c14
-rw-r--r--drivers/media/video/gspca/Kconfig215
-rw-r--r--drivers/media/video/gspca/Makefile75
-rw-r--r--drivers/media/video/gspca/conex.c3
-rw-r--r--drivers/media/video/gspca/etoms.c3
-rw-r--r--drivers/media/video/gspca/finepix.c466
-rw-r--r--drivers/media/video/gspca/gspca.c245
-rw-r--r--drivers/media/video/gspca/gspca.h21
-rw-r--r--drivers/media/video/gspca/m5602/Kconfig11
-rw-r--r--drivers/media/video/gspca/m5602/Makefile11
-rw-r--r--drivers/media/video/gspca/m5602/m5602_bridge.h170
-rw-r--r--drivers/media/video/gspca/m5602/m5602_core.c313
-rw-r--r--drivers/media/video/gspca/m5602/m5602_mt9m111.c345
-rw-r--r--drivers/media/video/gspca/m5602/m5602_mt9m111.h1020
-rw-r--r--drivers/media/video/gspca/m5602/m5602_ov9650.c546
-rw-r--r--drivers/media/video/gspca/m5602/m5602_ov9650.h503
-rw-r--r--drivers/media/video/gspca/m5602/m5602_po1030.c336
-rw-r--r--drivers/media/video/gspca/m5602/m5602_po1030.h478
-rw-r--r--drivers/media/video/gspca/m5602/m5602_s5k4aa.c463
-rw-r--r--drivers/media/video/gspca/m5602/m5602_s5k4aa.h370
-rw-r--r--drivers/media/video/gspca/m5602/m5602_s5k83a.c423
-rw-r--r--drivers/media/video/gspca/m5602/m5602_s5k83a.h484
-rw-r--r--drivers/media/video/gspca/m5602/m5602_sensor.h76
-rw-r--r--drivers/media/video/gspca/mars.c20
-rw-r--r--drivers/media/video/gspca/ov519.c5
-rw-r--r--drivers/media/video/gspca/pac207.c4
-rw-r--r--drivers/media/video/gspca/pac7311.c3
-rw-r--r--drivers/media/video/gspca/sonixb.c5
-rw-r--r--drivers/media/video/gspca/sonixj.c89
-rw-r--r--drivers/media/video/gspca/spca500.c3
-rw-r--r--drivers/media/video/gspca/spca501.c3
-rw-r--r--drivers/media/video/gspca/spca505.c3
-rw-r--r--drivers/media/video/gspca/spca506.c3
-rw-r--r--drivers/media/video/gspca/spca508.c3
-rw-r--r--drivers/media/video/gspca/spca561.c10
-rw-r--r--drivers/media/video/gspca/stk014.c5
-rw-r--r--drivers/media/video/gspca/sunplus.c3
-rw-r--r--drivers/media/video/gspca/t613.c591
-rw-r--r--drivers/media/video/gspca/tv8532.c3
-rw-r--r--drivers/media/video/gspca/vc032x.c6
-rw-r--r--drivers/media/video/gspca/zc3xx.c3
-rw-r--r--drivers/media/video/ir-kbd-i2c.c64
-rw-r--r--drivers/media/video/ivtv/ivtv-cards.h2
-rw-r--r--drivers/media/video/ivtv/ivtv-driver.c12
-rw-r--r--drivers/media/video/ivtv/ivtv-driver.h9
-rw-r--r--drivers/media/video/ivtv/ivtv-fileops.c8
-rw-r--r--drivers/media/video/ivtv/ivtv-fileops.h5
-rw-r--r--drivers/media/video/ivtv/ivtv-gpio.c2
-rw-r--r--drivers/media/video/ivtv/ivtv-gpio.h2
-rw-r--r--drivers/media/video/ivtv/ivtv-i2c.c2
-rw-r--r--drivers/media/video/ivtv/ivtv-ioctl.c58
-rw-r--r--drivers/media/video/ivtv/ivtv-irq.c9
-rw-r--r--drivers/media/video/ivtv/ivtv-streams.c42
-rw-r--r--drivers/media/video/ivtv/ivtv-vbi.c2
-rw-r--r--drivers/media/video/ivtv/ivtv-yuv.c1
-rw-r--r--drivers/media/video/ivtv/ivtvfb.c78
-rw-r--r--drivers/media/video/meye.c13
-rw-r--r--drivers/media/video/meye.h1
-rw-r--r--drivers/media/video/mt9m001.c55
-rw-r--r--drivers/media/video/mt9m111.c973
-rw-r--r--drivers/media/video/mt9v022.c52
-rw-r--r--drivers/media/video/mxb.c469
-rw-r--r--drivers/media/video/ov511.c105
-rw-r--r--drivers/media/video/ov511.h3
-rw-r--r--drivers/media/video/ovcamchip/ovcamchip_core.c6
-rw-r--r--drivers/media/video/ovcamchip/ovcamchip_priv.h6
-rw-r--r--drivers/media/video/pms.c23
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-ctrl.c8
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-ctrl.h2
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-hdw-internal.h9
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-hdw.c340
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-hdw.h13
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-i2c-chips-v4l2.c7
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.c46
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-i2c-cmd-v4l2.h1
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-i2c-core.c42
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-main.c8
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-sysfs.c23
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-v4l2.c94
-rw-r--r--drivers/media/video/pwc/pwc-ctrl.c1
-rw-r--r--drivers/media/video/pwc/pwc-if.c12
-rw-r--r--drivers/media/video/pwc/pwc-v4l.c2
-rw-r--r--drivers/media/video/pxa_camera.c48
-rw-r--r--drivers/media/video/s2255drv.c572
-rw-r--r--drivers/media/video/saa5246a.c556
-rw-r--r--drivers/media/video/saa5246a.h359
-rw-r--r--drivers/media/video/saa5249.c704
-rw-r--r--drivers/media/video/saa7115.c42
-rw-r--r--drivers/media/video/saa7134/saa6752hs.c440
-rw-r--r--drivers/media/video/saa7134/saa7134-cards.c261
-rw-r--r--drivers/media/video/saa7134/saa7134-core.c62
-rw-r--r--drivers/media/video/saa7134/saa7134-dvb.c52
-rw-r--r--drivers/media/video/saa7134/saa7134-empress.c63
-rw-r--r--drivers/media/video/saa7134/saa7134-i2c.c11
-rw-r--r--drivers/media/video/saa7134/saa7134-input.c210
-rw-r--r--drivers/media/video/saa7134/saa7134-ts.c56
-rw-r--r--drivers/media/video/saa7134/saa7134-video.c63
-rw-r--r--drivers/media/video/saa7134/saa7134.h19
-rw-r--r--drivers/media/video/se401.c44
-rw-r--r--drivers/media/video/sh_mobile_ceu_camera.c5
-rw-r--r--drivers/media/video/sn9c102/sn9c102_core.c34
-rw-r--r--drivers/media/video/sn9c102/sn9c102_devtable.h20
-rw-r--r--drivers/media/video/sn9c102/sn9c102_hv7131d.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_hv7131r.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_mi0343.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_mi0360.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_mt9v111.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_ov7630.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_ov7660.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_pas106b.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_pas202bcb.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_tas5110c1b.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_tas5110d.c1
-rw-r--r--drivers/media/video/sn9c102/sn9c102_tas5130d1b.c1
-rw-r--r--drivers/media/video/stk-webcam.c90
-rw-r--r--drivers/media/video/stk-webcam.h2
-rw-r--r--drivers/media/video/stradis.c7
-rw-r--r--drivers/media/video/stv680.c8
-rw-r--r--drivers/media/video/tda9840.c260
-rw-r--r--drivers/media/video/tda9840.h21
-rw-r--r--drivers/media/video/tea6415c.c131
-rw-r--r--drivers/media/video/tea6420.c147
-rw-r--r--drivers/media/video/tuner-3036.c214
-rw-r--r--drivers/media/video/tuner-core.c13
-rw-r--r--drivers/media/video/usbvideo/ibmcam.c78
-rw-r--r--drivers/media/video/usbvideo/konicawc.c17
-rw-r--r--drivers/media/video/usbvideo/quickcam_messenger.c3
-rw-r--r--drivers/media/video/usbvideo/ultracam.c29
-rw-r--r--drivers/media/video/usbvideo/usbvideo.c166
-rw-r--r--drivers/media/video/usbvideo/vicam.c17
-rw-r--r--drivers/media/video/usbvision/usbvision-core.c3
-rw-r--r--drivers/media/video/usbvision/usbvision-i2c.c3
-rw-r--r--drivers/media/video/usbvision/usbvision-video.c127
-rw-r--r--drivers/media/video/uvc/uvc_ctrl.c185
-rw-r--r--drivers/media/video/uvc/uvc_driver.c51
-rw-r--r--drivers/media/video/uvc/uvc_status.c11
-rw-r--r--drivers/media/video/uvc/uvc_v4l2.c17
-rw-r--r--drivers/media/video/uvc/uvc_video.c12
-rw-r--r--drivers/media/video/uvc/uvcvideo.h4
-rw-r--r--drivers/media/video/v4l2-common.c183
-rw-r--r--drivers/media/video/v4l2-dev.c300
-rw-r--r--drivers/media/video/v4l2-ioctl.c12
-rw-r--r--drivers/media/video/vino.c25
-rw-r--r--drivers/media/video/vivi.c7
-rw-r--r--drivers/media/video/vpx3220.c2
-rw-r--r--drivers/media/video/w9966.c29
-rw-r--r--drivers/media/video/zc0301/zc0301_core.c14
-rw-r--r--drivers/media/video/zoran/Kconfig73
-rw-r--r--drivers/media/video/zoran/Makefile6
-rw-r--r--drivers/media/video/zoran/videocodec.c (renamed from drivers/media/video/videocodec.c)0
-rw-r--r--drivers/media/video/zoran/videocodec.h (renamed from drivers/media/video/videocodec.h)0
-rw-r--r--drivers/media/video/zoran/zoran.h (renamed from drivers/media/video/zoran.h)0
-rw-r--r--drivers/media/video/zoran/zoran_card.c (renamed from drivers/media/video/zoran_card.c)0
-rw-r--r--drivers/media/video/zoran/zoran_card.h (renamed from drivers/media/video/zoran_card.h)0
-rw-r--r--drivers/media/video/zoran/zoran_device.c (renamed from drivers/media/video/zoran_device.c)6
-rw-r--r--drivers/media/video/zoran/zoran_device.h (renamed from drivers/media/video/zoran_device.h)8
-rw-r--r--drivers/media/video/zoran/zoran_driver.c (renamed from drivers/media/video/zoran_driver.c)13
-rw-r--r--drivers/media/video/zoran/zoran_procfs.c (renamed from drivers/media/video/zoran_procfs.c)0
-rw-r--r--drivers/media/video/zoran/zoran_procfs.h (renamed from drivers/media/video/zoran_procfs.h)0
-rw-r--r--drivers/media/video/zoran/zr36016.c (renamed from drivers/media/video/zr36016.c)0
-rw-r--r--drivers/media/video/zoran/zr36016.h (renamed from drivers/media/video/zr36016.h)0
-rw-r--r--drivers/media/video/zoran/zr36050.c (renamed from drivers/media/video/zr36050.c)0
-rw-r--r--drivers/media/video/zoran/zr36050.h (renamed from drivers/media/video/zr36050.h)0
-rw-r--r--drivers/media/video/zoran/zr36057.h (renamed from drivers/media/video/zr36057.h)0
-rw-r--r--drivers/media/video/zoran/zr36060.c (renamed from drivers/media/video/zr36060.c)0
-rw-r--r--drivers/media/video/zoran/zr36060.h (renamed from drivers/media/video/zr36060.h)0
-rw-r--r--drivers/media/video/zr364xx.c87
-rw-r--r--drivers/mtd/maps/pcmciamtd.c34
-rw-r--r--drivers/net/3c501.c12
-rw-r--r--drivers/net/3c515.c2
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/net/appletalk/cops.c2
-rw-r--r--drivers/net/cxgb3/adapter.h2
-rw-r--r--drivers/net/cxgb3/ael1002.c2
-rw-r--r--drivers/net/cxgb3/common.h2
-rw-r--r--drivers/net/cxgb3/cxgb3_ctl_defs.h2
-rw-r--r--drivers/net/cxgb3/cxgb3_defs.h2
-rw-r--r--drivers/net/cxgb3/cxgb3_ioctl.h2
-rw-r--r--drivers/net/cxgb3/cxgb3_main.c2
-rw-r--r--drivers/net/cxgb3/cxgb3_offload.c2
-rw-r--r--drivers/net/cxgb3/cxgb3_offload.h2
-rw-r--r--drivers/net/cxgb3/firmware_exports.h2
-rw-r--r--drivers/net/cxgb3/l2t.c2
-rw-r--r--drivers/net/cxgb3/l2t.h2
-rw-r--r--drivers/net/cxgb3/mc5.c2
-rw-r--r--drivers/net/cxgb3/sge.c2
-rw-r--r--drivers/net/cxgb3/t3_cpl.h2
-rw-r--r--drivers/net/cxgb3/t3_hw.c2
-rw-r--r--drivers/net/cxgb3/t3cdev.h2
-rw-r--r--drivers/net/cxgb3/version.h4
-rw-r--r--drivers/net/cxgb3/vsc8211.c2
-rw-r--r--drivers/net/cxgb3/xgmac.c2
-rw-r--r--drivers/net/eexpress.c2
-rw-r--r--drivers/net/enic/enic_main.c1
-rw-r--r--drivers/net/ibmlana.c2
-rw-r--r--drivers/net/jme.c1
-rw-r--r--drivers/net/macmace.c2
-rw-r--r--drivers/net/pcmcia/3c574_cs.c7
-rw-r--r--drivers/net/pcmcia/3c589_cs.c9
-rw-r--r--drivers/net/pcmcia/axnet_cs.c80
-rw-r--r--drivers/net/pcmcia/com20020_cs.c8
-rw-r--r--drivers/net/pcmcia/fmvj18x_cs.c21
-rw-r--r--drivers/net/pcmcia/ibmtr_cs.c2
-rw-r--r--drivers/net/pcmcia/nmclan_cs.c4
-rw-r--r--drivers/net/pcmcia/pcnet_cs.c86
-rw-r--r--drivers/net/pcmcia/smc91c92_cs.c151
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c79
-rw-r--r--drivers/net/phy/mdio_bus.c1
-rw-r--r--drivers/net/phy/phy_device.c1
-rw-r--r--drivers/net/qlge/qlge.h2
-rw-r--r--drivers/net/qlge/qlge_main.c1
-rw-r--r--drivers/net/tlan.c3
-rw-r--r--drivers/net/tokenring/smctr.c2
-rw-r--r--drivers/net/tulip/de2104x.c1
-rw-r--r--drivers/net/tulip/dmfe.c4
-rw-r--r--drivers/net/via-velocity.c2
-rw-r--r--drivers/net/wan/z85230.c3
-rw-r--r--drivers/net/wan/z85230.h2
-rw-r--r--drivers/net/wireless/airo_cs.c222
-rw-r--r--drivers/net/wireless/atmel_cs.c119
-rw-r--r--drivers/net/wireless/b43/pcmcia.c16
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c237
-rw-r--r--drivers/net/wireless/libertas/if_cs.c2
-rw-r--r--drivers/net/wireless/netwave_cs.c5
-rw-r--r--drivers/net/wireless/orinoco_cs.c165
-rw-r--r--drivers/net/wireless/ray_cs.c4
-rw-r--r--drivers/net/wireless/spectrum_cs.c162
-rw-r--r--drivers/net/wireless/wavelan.c2
-rw-r--r--drivers/net/wireless/wavelan.p.h2
-rw-r--r--drivers/net/wireless/wavelan_cs.c16
-rw-r--r--drivers/net/wireless/wl3501_cs.c4
-rw-r--r--drivers/parport/parport_cs.c70
-rw-r--r--drivers/pcmcia/Makefile4
-rw-r--r--drivers/pcmcia/au1000_generic.c2
-rw-r--r--drivers/pcmcia/au1000_generic.h2
-rw-r--r--drivers/pcmcia/au1000_pb1x00.c1
-rw-r--r--drivers/pcmcia/au1000_xxs1500.c1
-rw-r--r--drivers/pcmcia/cardbus.c2
-rw-r--r--drivers/pcmcia/cistpl.c297
-rw-r--r--drivers/pcmcia/cs.c78
-rw-r--r--drivers/pcmcia/cs_internal.h226
-rw-r--r--drivers/pcmcia/ds.c239
-rw-r--r--drivers/pcmcia/ds_internal.h23
-rw-r--r--drivers/pcmcia/hd64465_ss.c1
-rw-r--r--drivers/pcmcia/i82365.c2
-rw-r--r--drivers/pcmcia/m32r_cfc.c4
-rw-r--r--drivers/pcmcia/m32r_pcc.c4
-rw-r--r--drivers/pcmcia/m8xx_pcmcia.c4
-rw-r--r--drivers/pcmcia/o2micro.h10
-rw-r--r--drivers/pcmcia/pcmcia_ioctl.c120
-rw-r--r--drivers/pcmcia/pcmcia_resource.c381
-rw-r--r--drivers/pcmcia/pxa2xx_base.c1
-rw-r--r--drivers/pcmcia/rsrc_nonstatic.c67
-rw-r--r--drivers/pcmcia/soc_common.c2
-rw-r--r--drivers/pcmcia/soc_common.h3
-rw-r--r--drivers/pcmcia/socket_sysfs.c13
-rw-r--r--drivers/pcmcia/tcic.c2
-rw-r--r--drivers/pcmcia/ti113x.h78
-rw-r--r--drivers/pcmcia/yenta_socket.c86
-rw-r--r--drivers/s390/net/claw.c2
-rw-r--r--drivers/scsi/Kconfig9
-rw-r--r--drivers/scsi/atari_dma_emul.c468
-rw-r--r--drivers/scsi/atari_scsi.c27
-rw-r--r--drivers/scsi/ide-scsi.c102
-rw-r--r--drivers/scsi/pcmcia/aha152x_stub.c58
-rw-r--r--drivers/scsi/pcmcia/fdomain_stub.c37
-rw-r--r--drivers/scsi/pcmcia/nsp_cs.c194
-rw-r--r--drivers/scsi/pcmcia/qlogic_stub.c47
-rw-r--r--drivers/scsi/pcmcia/sym53c500_cs.c46
-rw-r--r--drivers/serial/8250.c3
-rw-r--r--drivers/serial/serial_cs.c302
-rw-r--r--drivers/ssb/pcmcia.c22
-rw-r--r--drivers/telephony/ixj_pcmcia.c72
-rw-r--r--drivers/usb/host/sl811_cs.c133
-rw-r--r--drivers/video/console/fbcon.c39
-rw-r--r--drivers/video/console/mdacon.c2
-rw-r--r--drivers/video/console/sticon.c4
-rw-r--r--drivers/video/console/vgacon.c4
-rw-r--r--include/asm-m68k/atarihw.h1
-rw-r--r--include/asm-m68k/dma-mapping.h16
-rw-r--r--include/asm-m68k/dma.h4
-rw-r--r--include/asm-m68k/entry.h2
-rw-r--r--include/asm-m68k/io.h66
-rw-r--r--include/asm-m68k/pci.h47
-rw-r--r--include/asm-m68k/virtconvert.h6
-rw-r--r--include/linux/console_struct.h1
-rw-r--r--include/linux/dvb/frontend.h110
-rw-r--r--include/linux/dvb/version.h4
-rw-r--r--include/linux/i2c-id.h1
-rw-r--r--include/linux/ide.h653
-rw-r--r--include/linux/if_ether.h2
-rw-r--r--include/linux/if_fddi.h2
-rw-r--r--include/linux/if_hippi.h2
-rw-r--r--include/linux/igmp.h2
-rw-r--r--include/linux/ivtv.h1
-rw-r--r--include/linux/netdevice.h2
-rw-r--r--include/linux/videodev2.h30
-rw-r--r--include/media/ir-common.h11
-rw-r--r--include/media/saa7115.h19
-rw-r--r--include/media/saa7146.h2
-rw-r--r--include/media/sh_mobile_ceu.h2
-rw-r--r--include/media/soc_camera.h3
-rw-r--r--include/media/tuner.h3
-rw-r--r--include/media/v4l2-chip-ident.h5
-rw-r--r--include/media/v4l2-common.h15
-rw-r--r--include/media/v4l2-dev.h75
-rw-r--r--include/media/v4l2-ioctl.h5
-rw-r--r--include/pcmcia/ciscode.h2
-rw-r--r--include/pcmcia/cistpl.h38
-rw-r--r--include/pcmcia/cs.h165
-rw-r--r--include/pcmcia/cs_types.h8
-rw-r--r--include/pcmcia/device_id.h18
-rw-r--r--include/pcmcia/ds.h411
-rw-r--r--include/pcmcia/ss.h202
-rw-r--r--include/sound/tea575x-tuner.h1
-rw-r--r--init/do_mounts_md.c40
-rw-r--r--init/main.c2
-rw-r--r--net/802/psnap.c2
-rw-r--r--net/appletalk/ddp.c4
-rw-r--r--net/core/datagram.c2
-rw-r--r--net/core/dev_mcast.c2
-rw-r--r--net/core/pktgen.c8
-rw-r--r--net/core/skbuff.c2
-rw-r--r--net/core/stream.c2
-rw-r--r--net/dsa/Kconfig2
-rw-r--r--net/ipv4/icmp.c2
-rw-r--r--net/ipv4/igmp.c2
-rw-r--r--net/ipv4/ip_fragment.c2
-rw-r--r--net/ipv4/ip_input.c2
-rw-r--r--net/ipv4/ipip.c2
-rw-r--r--net/ipv4/ipmr.c2
-rw-r--r--net/ipv4/udp.c2
-rw-r--r--net/ipv6/af_inet6.c2
-rw-r--r--net/netlink/af_netlink.c2
-rw-r--r--net/rfkill/rfkill-input.c1
-rw-r--r--net/sunrpc/xprtsock.c4
-rw-r--r--net/unix/af_unix.c2
-rw-r--r--scripts/bootgraph.pl147
-rw-r--r--sound/i2c/other/tea575x-tuner.c23
650 files changed, 36037 insertions, 14619 deletions
diff --git a/Documentation/laptops/disk-shock-protection.txt b/Documentation/laptops/disk-shock-protection.txt
new file mode 100644
index 000000000000..0e6ba2663834
--- /dev/null
+++ b/Documentation/laptops/disk-shock-protection.txt
@@ -0,0 +1,149 @@
+Hard disk shock protection
+==========================
+
+Author: Elias Oltmanns <eo@nebensachen.de>
+Last modified: 2008-10-03
+
+
+0. Contents
+-----------
+
+1. Intro
+2. The interface
+3. References
+4. CREDITS
+
+
+1. Intro
+--------
+
+ATA/ATAPI-7 specifies the IDLE IMMEDIATE command with unload feature.
+Issuing this command should cause the drive to switch to idle mode and
+unload disk heads. This feature is being used in modern laptops in
+conjunction with accelerometers and appropriate software to implement
+a shock protection facility. The idea is to stop all I/O operations on
+the internal hard drive and park its heads on the ramp when critical
+situations are anticipated. The desire to have such a feature
+available on GNU/Linux systems has been the original motivation to
+implement a generic disk head parking interface in the Linux kernel.
+Please note, however, that other components have to be set up on your
+system in order to get disk shock protection working (see
+section 3. References below for pointers to more information about
+that).
+
+
+2. The interface
+----------------
+
+For each ATA device, the kernel exports the file
+block/*/device/unload_heads in sysfs (here assumed to be mounted under
+/sys). Access to /sys/block/*/device/unload_heads is denied with
+-EOPNOTSUPP if the device does not support the unload feature.
+Otherwise, writing an integer value to this file will take the heads
+of the respective drive off the platter and block all I/O operations
+for the specified number of milliseconds. When the timeout expires and
+no further disk head park request has been issued in the meantime,
+normal operation will be resumed. The maximal value accepted for a
+timeout is 30000 milliseconds. Exceeding this limit will return
+-EOVERFLOW, but heads will be parked anyway and the timeout will be
+set to 30 seconds. However, you can always change a timeout to any
+value between 0 and 30000 by issuing a subsequent head park request
+before the timeout of the previous one has expired. In particular, the
+total timeout can exceed 30 seconds and, more importantly, you can
+cancel a previously set timeout and resume normal operation
+immediately by specifying a timeout of 0. Values below -2 are rejected
+with -EINVAL (see below for the special meaning of -1 and -2). If the
+timeout specified for a recent head park request has not yet expired,
+reading from /sys/block/*/device/unload_heads will report the number
+of milliseconds remaining until normal operation will be resumed;
+otherwise, reading the unload_heads attribute will return 0.
+
+For example, do the following in order to park the heads of drive
+/dev/sda and stop all I/O operations for five seconds:
+
+# echo 5000 > /sys/block/sda/device/unload_heads
+
+A simple
+
+# cat /sys/block/sda/device/unload_heads
+
+will show you how many milliseconds are left before normal operation
+will be resumed.
+
+A word of caution: The fact that the interface operates on a basis of
+milliseconds may raise expectations that cannot be satisfied in
+reality. In fact, the ATA specs clearly state that the time for an
+unload operation to complete is vendor specific. The hint in ATA-7
+that this will typically be within 500 milliseconds apparently has
+been dropped in ATA-8.
+
+There is a technical detail of this implementation that may cause some
+confusion and should be discussed here. When a head park request has
+been issued to a device successfully, all I/O operations on the
+controller port this device is attached to will be deferred. That is
+to say, any other device that may be connected to the same port will
+be affected too. The only exception is that a subsequent head unload
+request to that other device will be executed immediately. Further
+operations on that port will be deferred until the timeout specified
+for either device on the port has expired. As far as PATA (old style
+IDE) configurations are concerned, there can only be two devices
+attached to any single port. In SATA world we have port multipliers
+which means that a user-issued head parking request to one device may
+actually result in stopping I/O to a whole bunch of devices. However,
+since this feature is supposed to be used on laptops and does not seem
+to be very useful in any other environment, there will be mostly one
+device per port. Even if the CD/DVD writer happens to be connected to
+the same port as the hard drive, it generally *should* recover just
+fine from the occasional buffer under-run incurred by a head park
+request to the HD. Actually, when you are using an ide driver rather
+than its libata counterpart (i.e. your disk is called /dev/hda
+instead of /dev/sda), then parking the heads of one drive (drive X)
+will generally not affect the mode of operation of another drive
+(drive Y) on the same port as described above. It is only when a port
+reset is required to recover from an exception on drive Y that further
+I/O operations on that drive (and the reset itself) will be delayed
+until drive X is no longer in the parked state.
+
+Finally, there are some hard drives that only comply with an earlier
+version of the ATA standard than ATA-7, but do support the unload
+feature nonetheless. Unfortunately, there is no safe way Linux can
+detect these devices, so you won't be able to write to the
+unload_heads attribute. If you know that your device really does
+support the unload feature (for instance, because the vendor of your
+laptop or the hard drive itself told you so), then you can tell the
+kernel to enable the usage of this feature for that drive by writing
+the special value -1 to the unload_heads attribute:
+
+# echo -1 > /sys/block/sda/device/unload_heads
+
+will enable the feature for /dev/sda, and giving -2 instead of -1 will
+disable it again.
+
+
+3. References
+-------------
+
+There are several laptops from different vendors featuring shock
+protection capabilities. As manufacturers have refused to support open
+source development of the required software components so far, Linux
+support for shock protection varies considerably between different
+hardware implementations. Ideally, this section should contain a list
+of pointers at different projects aiming at an implementation of shock
+protection on different systems. Unfortunately, I only know of a
+single project which, although still considered experimental, is fit
+for use. Please feel free to add projects that have been the victims
+of my ignorance.
+
+- http://www.thinkwiki.org/wiki/HDAPS
+ See this page for information about Linux support of the hard disk
+ active protection system as implemented in IBM/Lenovo Thinkpads.
+
+
+4. CREDITS
+----------
+
+This implementation of disk head parking has been inspired by a patch
+originally published by Jon Escombe <lists@dresco.co.uk>. My efforts
+to develop an implementation of this feature that is fit to be merged
+into mainline have been aided by various kernel developers, in
+particular by Tejun Heo and Bartlomiej Zolnierkiewicz.
diff --git a/Documentation/pcmcia/driver-changes.txt b/Documentation/pcmcia/driver-changes.txt
index 96f155e68750..059934363caf 100644
--- a/Documentation/pcmcia/driver-changes.txt
+++ b/Documentation/pcmcia/driver-changes.txt
@@ -1,5 +1,11 @@
This file details changes in 2.6 which affect PCMCIA card driver authors:
+* New configuration loop helper (as of 2.6.28)
+ By calling pcmcia_loop_config(), a driver can iterate over all available
+ configuration options. During a driver's probe() phase, one doesn't need
+ to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data and
+ pcmcia_parse_tuple directly in most if not all cases.
+
* New release helper (as of 2.6.17)
Instead of calling pcmcia_release_{configuration,io,irq,win}, all that's
necessary now is calling pcmcia_disable_device. As there is no valid
diff --git a/Documentation/video4linux/CARDLIST.bttv b/Documentation/video4linux/CARDLIST.bttv
index f32efb6fb12c..60ba66836038 100644
--- a/Documentation/video4linux/CARDLIST.bttv
+++ b/Documentation/video4linux/CARDLIST.bttv
@@ -150,3 +150,4 @@
149 -> Typhoon TV-Tuner PCI (50684)
150 -> Geovision GV-600 [008a:763c]
151 -> Kozumi KTV-01C
+152 -> Encore ENL TV-FM-2 [1000:1801]
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index f0e613ba55b8..64823ccacd69 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -9,3 +9,5 @@
8 -> Hauppauge WinTV-HVR1700 [0070:8101]
9 -> Hauppauge WinTV-HVR1400 [0070:8010]
10 -> DViCO FusionHDTV7 Dual Express [18ac:d618]
+ 11 -> DViCO FusionHDTV DVB-T Dual Express [18ac:db78]
+ 12 -> Leadtek Winfast PxDVR3200 H [107d:6681]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 7cf5685d3645..a5227e308f4a 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -66,3 +66,11 @@
65 -> DViCO FusionHDTV 7 Gold [18ac:d610]
66 -> Prolink Pixelview MPEG 8000GT [1554:4935]
67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [17de:08c1]
+ 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902]
+ 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906]
+ 70 -> TeVii S460 DVB-S/S2 [d460:9022]
+ 71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011]
+ 72 -> TBS 8920 DVB-S/S2 [8920:8888]
+ 73 -> TeVii S420 DVB-S [d420:9022]
+ 74 -> Prolink Pixelview Global Extreme [1554:4976]
+ 75 -> PROF 7300 DVB-S/S2 [B033:3033]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 53449cb99b17..187cc48d0924 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -1,5 +1,5 @@
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
- 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+ 1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201]
@@ -12,7 +12,7 @@
11 -> Terratec Hybrid XS (em2880) [0ccd:0042]
12 -> Kworld PVR TV 2800 RF (em2820/em2840)
13 -> Terratec Prodigy XS (em2880) [0ccd:0047]
- 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
+ 14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840) [eb1a:2821]
15 -> V-Gear PocketTV (em2800)
16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b,2040:651f]
17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227]
diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134
index 39868af9cf9f..dc67eef38ff9 100644
--- a/Documentation/video4linux/CARDLIST.saa7134
+++ b/Documentation/video4linux/CARDLIST.saa7134
@@ -76,7 +76,7 @@
75 -> AVerMedia AVerTVHD MCE A180 [1461:1044]
76 -> SKNet MonsterTV Mobile [1131:4ee9]
77 -> Pinnacle PCTV 40i/50i/110i (saa7133) [11bd:002e]
- 78 -> ASUSTeK P7131 Dual [1043:4862,1043:4857]
+ 78 -> ASUSTeK P7131 Dual [1043:4862]
79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
80 -> ASUS Digimatrix TV [1043:0210]
81 -> Philips Tiger reference design [1131:2018]
@@ -145,3 +145,9 @@
144 -> Beholder BeholdTV M6 Extra [5ace:6193]
145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636]
146 -> ASUSTeK P7131 Analog
+147 -> Asus Tiger 3in1 [1043:4878]
+148 -> Encore ENLTV-FM v5.3 [1a7f:2008]
+149 -> Avermedia PCI pure analog (M135A) [1461:f11d]
+150 -> Zogis Real Angel 220
+151 -> ADS Tech Instant HDTV [1421:0380]
+152 -> Asus Tiger Rev:1.00 [1043:4857]
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index 0e2394695bb8..30bbdda68d03 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -74,3 +74,4 @@ tuner=72 - Thomson FE6600
tuner=73 - Samsung TCPG 6121P30A
tuner=75 - Philips TEA5761 FM Radio
tuner=76 - Xceive 5000 tuner
+tuner=77 - TCL tuner MF02GIP-5N-E
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 9a3e4d797fa8..004818fab040 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -7,6 +7,7 @@ The modules are:
xxxx vend:prod
----
spca501 0000:0000 MystFromOri Unknow Camera
+m5602 0402:5602 ALi Video Camera Controller
spca501 040a:0002 Kodak DVC-325
spca500 040a:0300 Kodak EZ200
zc3xx 041e:041e Creative WebCam Live!
@@ -42,6 +43,7 @@ zc3xx 0458:7007 Genius VideoCam V2
zc3xx 0458:700c Genius VideoCam V3
zc3xx 0458:700f Genius VideoCam Web V2
sonixj 0458:7025 Genius Eye 311Q
+sonixj 0458:702e Genius Slim 310 NB
sonixj 045e:00f5 MicroSoft VX3000
sonixj 045e:00f7 MicroSoft VX1000
ov519 045e:028c Micro$oft xbox cam
@@ -81,7 +83,7 @@ spca561 046d:092b Labtec Webcam Plus
spca561 046d:092c Logitech QC chat Elch2
spca561 046d:092d Logitech QC Elch2
spca561 046d:092e Logitech QC Elch2
-spca561 046d:092f Logitech QC Elch2
+spca561 046d:092f Logitech QuickCam Express Plus
sunplus 046d:0960 Logitech ClickSmart 420
sunplus 0471:0322 Philips DMVC1300K
zc3xx 0471:0325 Philips SPC 200 NC
@@ -96,6 +98,29 @@ sunplus 04a5:3003 Benq DC 1300
sunplus 04a5:3008 Benq DC 1500
sunplus 04a5:300a Benq DC 3410
spca500 04a5:300c Benq DC 1016
+finepix 04cb:0104 Fujifilm FinePix 4800
+finepix 04cb:0109 Fujifilm FinePix A202
+finepix 04cb:010b Fujifilm FinePix A203
+finepix 04cb:010f Fujifilm FinePix A204
+finepix 04cb:0111 Fujifilm FinePix A205
+finepix 04cb:0113 Fujifilm FinePix A210
+finepix 04cb:0115 Fujifilm FinePix A303
+finepix 04cb:0117 Fujifilm FinePix A310
+finepix 04cb:0119 Fujifilm FinePix F401
+finepix 04cb:011b Fujifilm FinePix F402
+finepix 04cb:011d Fujifilm FinePix F410
+finepix 04cb:0121 Fujifilm FinePix F601
+finepix 04cb:0123 Fujifilm FinePix F700
+finepix 04cb:0125 Fujifilm FinePix M603
+finepix 04cb:0127 Fujifilm FinePix S300
+finepix 04cb:0129 Fujifilm FinePix S304
+finepix 04cb:012b Fujifilm FinePix S500
+finepix 04cb:012d Fujifilm FinePix S602
+finepix 04cb:012f Fujifilm FinePix S700
+finepix 04cb:0131 Fujifilm FinePix unknown model
+finepix 04cb:013b Fujifilm FinePix unknown model
+finepix 04cb:013d Fujifilm FinePix unknown model
+finepix 04cb:013f Fujifilm FinePix F420
sunplus 04f1:1001 JVC GC A50
spca561 04fc:0561 Flexcam 100
sunplus 04fc:500c Sunplus CA500C
@@ -181,6 +206,7 @@ pac207 093a:2468 PAC207
pac207 093a:2470 Genius GF112
pac207 093a:2471 Genius VideoCam ge111
pac207 093a:2472 Genius VideoCam ge110
+pac207 093a:2476 Genius e-Messenger 112
pac7311 093a:2600 PAC7311 Typhoon
pac7311 093a:2601 Philips SPC 610 NC
pac7311 093a:2603 PAC7312
diff --git a/Documentation/video4linux/m5602.txt b/Documentation/video4linux/m5602.txt
new file mode 100644
index 000000000000..4450ab13f37b
--- /dev/null
+++ b/Documentation/video4linux/m5602.txt
@@ -0,0 +1,12 @@
+This document describes the ALi m5602 bridge connected
+to the following supported sensors:
+OmniVision OV9650,
+Samsung s5k83a,
+Samsung s5k4aa,
+Micron mt9m111,
+Pixel plus PO1030
+
+This driver mimics the windows drivers, which have a braindead implementation sending bayer-encoded frames at VGA resolution.
+In a perfect world we should be able to reprogram the m5602 and the connected sensor in hardware instead, supporting a range of resolutions and pixelformats
+
+Anyway, have fun and please report any bugs to m560x-driver-devel@lists.sourceforge.net
diff --git a/Documentation/video4linux/soc-camera.txt b/Documentation/video4linux/soc-camera.txt
new file mode 100644
index 000000000000..178ef3c5e579
--- /dev/null
+++ b/Documentation/video4linux/soc-camera.txt
@@ -0,0 +1,120 @@
+ Soc-Camera Subsystem
+ ====================
+
+Terminology
+-----------
+
+The following terms are used in this document:
+ - camera / camera device / camera sensor - a video-camera sensor chip, capable
+ of connecting to a variety of systems and interfaces, typically uses i2c for
+ control and configuration, and a parallel or a serial bus for data.
+ - camera host - an interface, to which a camera is connected. Typically a
+ specialised interface, present on many SoCs, e.g., PXA27x and PXA3xx, SuperH,
+ AVR32, i.MX27, i.MX31.
+ - camera host bus - a connection between a camera host and a camera. Can be
+ parallel or serial, consists of data and control lines, e.g., clock, vertical
+ and horizontal synchronization signals.
+
+Purpose of the soc-camera subsystem
+-----------------------------------
+
+The soc-camera subsystem provides a unified API between camera host drivers and
+camera sensor drivers. It implements a V4L2 interface to the user, currently
+only the mmap method is supported.
+
+This subsystem has been written to connect drivers for System-on-Chip (SoC)
+video capture interfaces with drivers for CMOS camera sensor chips to enable
+the reuse of sensor drivers with various hosts. The subsystem has been designed
+to support multiple camera host interfaces and multiple cameras per interface,
+although most applications have only one camera sensor.
+
+Existing drivers
+----------------
+
+As of 2.6.27-rc4 there are two host drivers in the mainline: pxa_camera.c for
+PXA27x SoCs and sh_mobile_ceu_camera.c for SuperH SoCs, and four sensor drivers:
+mt9m001.c, mt9m111.c, mt9v022.c and a generic soc_camera_platform.c driver. This
+list is not supposed to be updated, look for more examples in your tree.
+
+Camera host API
+---------------
+
+A host camera driver is registered using the
+
+soc_camera_host_register(struct soc_camera_host *);
+
+function. The host object can be initialized as follows:
+
+static struct soc_camera_host pxa_soc_camera_host = {
+ .drv_name = PXA_CAM_DRV_NAME,
+ .ops = &pxa_soc_camera_host_ops,
+};
+
+All camera host methods are passed in a struct soc_camera_host_ops:
+
+static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
+ .owner = THIS_MODULE,
+ .add = pxa_camera_add_device,
+ .remove = pxa_camera_remove_device,
+ .suspend = pxa_camera_suspend,
+ .resume = pxa_camera_resume,
+ .set_fmt_cap = pxa_camera_set_fmt_cap,
+ .try_fmt_cap = pxa_camera_try_fmt_cap,
+ .init_videobuf = pxa_camera_init_videobuf,
+ .reqbufs = pxa_camera_reqbufs,
+ .poll = pxa_camera_poll,
+ .querycap = pxa_camera_querycap,
+ .try_bus_param = pxa_camera_try_bus_param,
+ .set_bus_param = pxa_camera_set_bus_param,
+};
+
+.add and .remove methods are called when a sensor is attached to or detached
+from the host, apart from performing host-internal tasks they shall also call
+sensor driver's .init and .release methods respectively. .suspend and .resume
+methods implement host's power-management functionality and its their
+responsibility to call respective sensor's methods. .try_bus_param and
+.set_bus_param are used to negotiate physical connection parameters between the
+host and the sensor. .init_videobuf is called by soc-camera core when a
+video-device is opened, further video-buffer management is implemented completely
+by the specific camera host driver. The rest of the methods are called from
+respective V4L2 operations.
+
+Camera API
+----------
+
+Sensor drivers can use struct soc_camera_link, typically provided by the
+platform, and used to specify to which camera host bus the sensor is connected,
+and arbitrarily provide platform .power and .reset methods for the camera.
+soc_camera_device_register() and soc_camera_device_unregister() functions are
+used to add a sensor driver to or remove one from the system. The registration
+function takes a pointer to struct soc_camera_device as the only parameter.
+This struct can be initialized as follows:
+
+ /* link to driver operations */
+ icd->ops = &mt9m001_ops;
+ /* link to the underlying physical (e.g., i2c) device */
+ icd->control = &client->dev;
+ /* window geometry */
+ icd->x_min = 20;
+ icd->y_min = 12;
+ icd->x_current = 20;
+ icd->y_current = 12;
+ icd->width_min = 48;
+ icd->width_max = 1280;
+ icd->height_min = 32;
+ icd->height_max = 1024;
+ icd->y_skip_top = 1;
+ /* camera bus ID, typically obtained from platform data */
+ icd->iface = icl->bus_id;
+
+struct soc_camera_ops provides .probe and .remove methods, which are called by
+the soc-camera core, when a camera is matched against or removed from a camera
+host bus, .init, .release, .suspend, and .resume are called from the camera host
+driver as discussed above. Other members of this struct provide respective V4L2
+functionality.
+
+struct soc_camera_device also links to an array of struct soc_camera_data_format,
+listing pixel formats, supported by the camera.
+
+--
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
diff --git a/MAINTAINERS b/MAINTAINERS
index 3fa9ac680f0f..5d0b8a23d639 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -72,8 +72,8 @@ M: Mail patches to
L: Mailing list that is relevant to this area
W: Web-page with status/info
T: SCM tree type and location. Type is one of: git, hg, quilt.
-S: Status, one of the following:
F: Applicable files and/or directories
+S: Status, one of the following:
Supported: Someone is actually paid to look after this.
Maintained: Someone actually looks after it.
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
index 39516ced8b1f..31abe6d514b8 100644
--- a/arch/arm/mach-pxa/include/mach/camera.h
+++ b/arch/arm/mach-pxa/include/mach/camera.h
@@ -36,8 +36,6 @@
struct pxacamera_platform_data {
int (*init)(struct device *);
- int (*power)(struct device *, int);
- int (*reset)(struct device *, int);
unsigned long flags;
unsigned long mclk_10khz;
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 41e5bf02e230..677c93a490f6 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -105,21 +105,9 @@ config PCMCIA
To compile this driver as modules, choose M here: the
modules will be called pcmcia_core and ds.
-config SUN3
- bool "Sun3 support"
- select M68020
- select MMU_SUN3 if MMU
- help
- This option enables support for the Sun 3 series of workstations
- (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
- that all other hardware types must be disabled, as Sun 3 kernels
- are incompatible with all other m68k targets (including Sun 3x!).
-
- If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
config AMIGA
bool "Amiga support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
This option enables support for the Amiga series of computers. If
you plan to use this kernel on an Amiga, say Y here and browse the
@@ -127,33 +115,16 @@ config AMIGA
config ATARI
bool "Atari support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
This option enables support for the 68000-based Atari series of
computers (including the TT, Falcon and Medusa). If you plan to use
this kernel on an Atari, say Y here and browse the material
available in <file:Documentation/m68k>; otherwise say N.
-config HADES
- bool "Hades support"
- depends on ATARI && BROKEN
- help
- This option enables support for the Hades Atari clone. If you plan
- to use this kernel on a Hades, say Y here; otherwise say N.
-
-config PCI
- bool
- depends on HADES
- default y
- help
- Find out whether you have a PCI motherboard. PCI is the name of a
- bus system, i.e. the way the CPU talks to the other stuff inside
- your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
- VESA. If you have PCI, say Y, otherwise N.
-
config MAC
bool "Macintosh support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
This option enables support for the Apple Macintosh series of
computers (yes, there is experimental support now, at least for part
@@ -174,14 +145,14 @@ config M68K_L2_CACHE
config APOLLO
bool "Apollo support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
Say Y here if you want to run Linux on an MC680x0-based Apollo
Domain workstation such as the DN3500.
config VME
bool "VME (Motorola and BVM) support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
Say Y here if you want to build a kernel for a 680x0 based VME
board. Boards currently supported include Motorola boards MVME147,
@@ -218,7 +189,7 @@ config BVME6000
config HP300
bool "HP9000/300 and HP9000/400 support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
This option enables support for the HP9000/300 and HP9000/400 series
of workstations. Support for these machines is still somewhat
@@ -237,7 +208,7 @@ config DIO
config SUN3X
bool "Sun3x support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
select M68030
help
This option enables support for the Sun 3x series of workstations.
@@ -250,7 +221,7 @@ config SUN3X
config Q40
bool "Q40/Q60 support"
- depends on !MMU_SUN3
+ select MMU_MOTOROLA if MMU
help
The Q40 is a Motorola 68040-based successor to the Sinclair QL
manufactured in Germany. There is an official Q40 home page at
@@ -258,6 +229,19 @@ config Q40
Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
emulation.
+config SUN3
+ bool "Sun3 support"
+ depends on !MMU_MOTOROLA
+ select MMU_SUN3 if MMU
+ select M68020
+ help
+ This option enables support for the Sun 3 series of workstations
+ (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
+ that all other hardware types must be disabled, as Sun 3 kernels
+ are incompatible with all other m68k targets (including Sun 3x!).
+
+ If you don't want to compile a kernel exclusively for a Sun 3, say N.
+
comment "Processor type"
config M68020
@@ -295,10 +279,10 @@ config M68060
config MMU_MOTOROLA
bool
depends on MMU && !MMU_SUN3
- default y
config MMU_SUN3
bool
+ depends on MMU && !MMU_MOTOROLA
config M68KFPU_EMU
bool "Math emulation support (EXPERIMENTAL)"
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index df679d96b1cb..0a3f9e8ebde0 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -24,6 +24,7 @@
#include <linux/interrupt.h>
#include <linux/zorro.h>
#include <linux/module.h>
+#include <linux/keyboard.h>
#include <asm/bootinfo.h>
#include <asm/setup.h>
@@ -984,3 +985,11 @@ static int amiga_get_hardware_list(char *buffer)
return len;
}
+
+/*
+ * The Amiga keyboard driver needs key_maps, but we cannot export it in
+ * drivers/char/defkeymap.c, as it is autogenerated
+ */
+#ifdef CONFIG_HW_CONSOLE
+EXPORT_SYMBOL_GPL(key_maps);
+#endif
diff --git a/arch/m68k/atari/Makefile b/arch/m68k/atari/Makefile
index 2cd905efe63a..0cac723306f9 100644
--- a/arch/m68k/atari/Makefile
+++ b/arch/m68k/atari/Makefile
@@ -5,7 +5,4 @@
obj-y := config.o time.o debug.o ataints.o stdma.o \
atasound.o stram.o
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_HADES) += hades-pci.o
-endif
obj-$(CONFIG_ATARI_KBD_CORE) += atakeyb.o
diff --git a/arch/m68k/atari/ataints.c b/arch/m68k/atari/ataints.c
index b45593a60bdd..dba4afabb444 100644
--- a/arch/m68k/atari/ataints.c
+++ b/arch/m68k/atari/ataints.c
@@ -407,10 +407,8 @@ void __init atari_init_IRQ(void)
* gets overruns)
*/
- if (!MACH_IS_HADES) {
- vectors[VEC_INT2] = falcon_hblhandler;
- vectors[VEC_INT4] = falcon_hblhandler;
- }
+ vectors[VEC_INT2] = falcon_hblhandler;
+ vectors[VEC_INT4] = falcon_hblhandler;
}
if (ATARIHW_PRESENT(PCM_8BIT) && ATARIHW_PRESENT(MICROWIRE)) {
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index bb959fbab2dc..c038b7c7eff0 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -635,15 +635,3 @@ int atari_keyb_init(void)
return 0;
}
EXPORT_SYMBOL_GPL(atari_keyb_init);
-
-int atari_kbd_translate(unsigned char keycode, unsigned char *keycodep, char raw_mode)
-{
-#ifdef CONFIG_MAGIC_SYSRQ
- /* ALT+HELP pressed? */
- if ((keycode == 98) && ((shift_state & 0xff) == 8))
- *keycodep = 0xff;
- else
-#endif
- *keycodep = keycode;
- return 1;
-}
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 5945e1505558..af031855f796 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -231,7 +231,7 @@ void __init config_atari(void)
*/
printk("Atari hardware found: ");
- if (MACH_IS_MEDUSA || MACH_IS_HADES) {
+ if (MACH_IS_MEDUSA) {
/* There's no Atari video hardware on the Medusa, but all the
* addresses below generate a DTACK so no bus error occurs! */
} else if (hwreg_present(f030_xreg)) {
@@ -269,10 +269,6 @@ void __init config_atari(void)
ATARIHW_SET(SCSI_DMA);
printk("TT_SCSI_DMA ");
}
- if (!MACH_IS_HADES && hwreg_present(&st_dma.dma_hi)) {
- ATARIHW_SET(STND_DMA);
- printk("STND_DMA ");
- }
/*
* The ST-DMA address registers aren't readable
* on all Medusas, so the test below may fail
@@ -294,12 +290,11 @@ void __init config_atari(void)
ATARIHW_SET(YM_2149);
printk("YM2149 ");
}
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present(&tt_dmasnd.ctrl)) {
+ if (!MACH_IS_MEDUSA && hwreg_present(&tt_dmasnd.ctrl)) {
ATARIHW_SET(PCM_8BIT);
printk("PCM ");
}
- if (!MACH_IS_HADES && hwreg_present(&falcon_codec.unused5)) {
+ if (hwreg_present(&falcon_codec.unused5)) {
ATARIHW_SET(CODEC);
printk("CODEC ");
}
@@ -313,7 +308,7 @@ void __init config_atari(void)
(tt_scc_dma.dma_ctrl = 0x01, (tt_scc_dma.dma_ctrl & 1) == 1) &&
(tt_scc_dma.dma_ctrl = 0x00, (tt_scc_dma.dma_ctrl & 1) == 0)
#else
- !MACH_IS_MEDUSA && !MACH_IS_HADES
+ !MACH_IS_MEDUSA
#endif
) {
ATARIHW_SET(SCC_DMA);
@@ -327,10 +322,7 @@ void __init config_atari(void)
ATARIHW_SET(ST_ESCC);
printk("ST_ESCC ");
}
- if (MACH_IS_HADES) {
- ATARIHW_SET(VME);
- printk("VME ");
- } else if (hwreg_present(&tt_scu.sys_mask)) {
+ if (hwreg_present(&tt_scu.sys_mask)) {
ATARIHW_SET(SCU);
/* Assume a VME bus if there's a SCU */
ATARIHW_SET(VME);
@@ -340,7 +332,7 @@ void __init config_atari(void)
ATARIHW_SET(ANALOG_JOY);
printk("ANALOG_JOY ");
}
- if (!MACH_IS_HADES && hwreg_present(blitter.halftone)) {
+ if (hwreg_present(blitter.halftone)) {
ATARIHW_SET(BLITTER);
printk("BLITTER ");
}
@@ -349,8 +341,7 @@ void __init config_atari(void)
printk("IDE ");
}
#if 1 /* This maybe wrong */
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present(&tt_microwire.data) &&
+ if (!MACH_IS_MEDUSA && hwreg_present(&tt_microwire.data) &&
hwreg_present(&tt_microwire.mask) &&
(tt_microwire.mask = 0x7ff,
udelay(1),
@@ -369,19 +360,18 @@ void __init config_atari(void)
mach_hwclk = atari_tt_hwclk;
mach_set_clock_mmss = atari_tt_set_clock_mmss;
}
- if (!MACH_IS_HADES && hwreg_present(&mste_rtc.sec_ones)) {
+ if (hwreg_present(&mste_rtc.sec_ones)) {
ATARIHW_SET(MSTE_CLK);
printk("MSTE_CLK ");
mach_hwclk = atari_mste_hwclk;
mach_set_clock_mmss = atari_mste_set_clock_mmss;
}
- if (!MACH_IS_MEDUSA && !MACH_IS_HADES &&
- hwreg_present(&dma_wd.fdc_speed) &&
+ if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
hwreg_write(&dma_wd.fdc_speed, 0)) {
ATARIHW_SET(FDCSPEED);
printk("FDC_SPEED ");
}
- if (!MACH_IS_HADES && !ATARIHW_PRESENT(ST_SCSI)) {
+ if (!ATARIHW_PRESENT(ST_SCSI)) {
ATARIHW_SET(ACSI);
printk("ACSI ");
}
@@ -449,7 +439,7 @@ void __init config_atari(void)
* 0xFFxxxxxx -> 0x00xxxxxx, so that the first 16MB is accessible
* in the last 16MB of the address space.
*/
- tos_version = (MACH_IS_MEDUSA || MACH_IS_HADES) ?
+ tos_version = (MACH_IS_MEDUSA) ?
0xfff : *(unsigned short *)0xff000002;
atari_rtc_year_offset = (tos_version < 0x306) ? 70 : 68;
}
@@ -511,8 +501,7 @@ static void atari_reset(void)
* On the Medusa, phys. 0x4 may contain garbage because it's no
* ROM. See above for explanation why we cannot use PTOV(4).
*/
- reset_addr = MACH_IS_HADES ? 0x7fe00030 :
- MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
+ reset_addr = MACH_IS_MEDUSA || MACH_IS_AB40 ? 0xe00030 :
*(unsigned long *) 0xff000004;
/* reset ACIA for switch off OverScan, if it's active */
@@ -606,8 +595,6 @@ static void atari_get_model(char *model)
if (MACH_IS_MEDUSA)
/* Medusa has TT _MCH cookie */
strcat(model, "Medusa");
- else if (MACH_IS_HADES)
- strcat(model, "Hades");
else
strcat(model, "TT");
break;
diff --git a/arch/m68k/atari/hades-pci.c b/arch/m68k/atari/hades-pci.c
deleted file mode 100644
index 2bbabc008708..000000000000
--- a/arch/m68k/atari/hades-pci.c
+++ /dev/null
@@ -1,440 +0,0 @@
-/*
- * hades-pci.c - Hardware specific PCI BIOS functions the Hades Atari clone.
- *
- * Written by Wout Klaren.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#if 0
-# define DBG_DEVS(args) printk args
-#else
-# define DBG_DEVS(args)
-#endif
-
-#if defined(CONFIG_PCI) && defined(CONFIG_HADES)
-
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/pci.h>
-
-#include <asm/atarihw.h>
-#include <asm/atariints.h>
-#include <asm/byteorder.h>
-#include <asm/pci.h>
-
-#define HADES_MEM_BASE 0x80000000
-#define HADES_MEM_SIZE 0x20000000
-#define HADES_CONFIG_BASE 0xA0000000
-#define HADES_CONFIG_SIZE 0x10000000
-#define HADES_IO_BASE 0xB0000000
-#define HADES_IO_SIZE 0x10000000
-#define HADES_VIRT_IO_SIZE 0x00010000 /* Only 64k is remapped and actually used. */
-
-#define N_SLOTS 4 /* Number of PCI slots. */
-
-static const char pci_mem_name[] = "PCI memory space";
-static const char pci_io_name[] = "PCI I/O space";
-static const char pci_config_name[] = "PCI config space";
-
-static struct resource config_space = {
- .name = pci_config_name,
- .start = HADES_CONFIG_BASE,
- .end = HADES_CONFIG_BASE + HADES_CONFIG_SIZE - 1
-};
-static struct resource io_space = {
- .name = pci_io_name,
- .start = HADES_IO_BASE,
- .end = HADES_IO_BASE + HADES_IO_SIZE - 1
-};
-
-static const unsigned long pci_conf_base_phys[] = {
- 0xA0080000, 0xA0040000, 0xA0020000, 0xA0010000
-};
-static unsigned long pci_conf_base_virt[N_SLOTS];
-static unsigned long pci_io_base_virt;
-
-/*
- * static void *mk_conf_addr(unsigned char bus, unsigned char device_fn,
- * unsigned char where)
- *
- * Calculate the address of the PCI configuration area of the given
- * device.
- *
- * BUG: boards with multiple functions are probably not correctly
- * supported.
- */
-
-static void *mk_conf_addr(struct pci_dev *dev, int where)
-{
- int device = dev->devfn >> 3, function = dev->devfn & 7;
- void *result;
-
- DBG_DEVS(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p)\n",
- dev->bus->number, dev->devfn, where, pci_addr));
-
- if (device > 3)
- {
- DBG_DEVS(("mk_conf_addr: device (%d) > 3, returning NULL\n", device));
- return NULL;
- }
-
- if (dev->bus->number != 0)
- {
- DBG_DEVS(("mk_conf_addr: bus (%d) > 0, returning NULL\n", device));
- return NULL;
- }
-
- result = (void *) (pci_conf_base_virt[device] | (function << 8) | (where));
- DBG_DEVS(("mk_conf_addr: returning pci_addr 0x%lx\n", (unsigned long) result));
- return result;
-}
-
-static int hades_read_config_byte(struct pci_dev *dev, int where, u8 *value)
-{
- volatile unsigned char *pci_addr;
-
- *value = 0xff;
-
- if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *value = *pci_addr;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_read_config_word(struct pci_dev *dev, int where, u16 *value)
-{
- volatile unsigned short *pci_addr;
-
- *value = 0xffff;
-
- if (where & 0x1)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *value = le16_to_cpu(*pci_addr);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_read_config_dword(struct pci_dev *dev, int where, u32 *value)
-{
- volatile unsigned int *pci_addr;
- unsigned char header_type;
- int result;
-
- *value = 0xffffffff;
-
- if (where & 0x3)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *value = le32_to_cpu(*pci_addr);
-
- /*
- * Check if the value is an address on the bus. If true, add the
- * base address of the PCI memory or PCI I/O area on the Hades.
- */
-
- if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
- &header_type)) != PCIBIOS_SUCCESSFUL)
- return result;
-
- if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
- ((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
- (where <= PCI_BASE_ADDRESS_5))))
- {
- if ((*value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO)
- {
- /*
- * Base address register that contains an I/O address. If the
- * address is valid on the Hades (0 <= *value < HADES_VIRT_IO_SIZE),
- * add 'pci_io_base_virt' to the value.
- */
-
- if (*value < HADES_VIRT_IO_SIZE)
- *value += pci_io_base_virt;
- }
- else
- {
- /*
- * Base address register that contains an memory address. If the
- * address is valid on the Hades (0 <= *value < HADES_MEM_SIZE),
- * add HADES_MEM_BASE to the value.
- */
-
- if (*value == 0)
- {
- /*
- * Base address is 0. Test if this base
- * address register is used.
- */
-
- *pci_addr = 0xffffffff;
- if (*pci_addr != 0)
- {
- *pci_addr = *value;
- if (*value < HADES_MEM_SIZE)
- *value += HADES_MEM_BASE;
- }
- }
- else
- {
- if (*value < HADES_MEM_SIZE)
- *value += HADES_MEM_BASE;
- }
- }
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_byte(struct pci_dev *dev, int where, u8 value)
-{
- volatile unsigned char *pci_addr;
-
- if ((pci_addr = (unsigned char *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *pci_addr = value;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_word(struct pci_dev *dev, int where, u16 value)
-{
- volatile unsigned short *pci_addr;
-
- if ((pci_addr = (unsigned short *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- *pci_addr = cpu_to_le16(value);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int hades_write_config_dword(struct pci_dev *dev, int where, u32 value)
-{
- volatile unsigned int *pci_addr;
- unsigned char header_type;
- int result;
-
- if ((pci_addr = (unsigned int *) mk_conf_addr(dev, where)) == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /*
- * Check if the value is an address on the bus. If true, subtract the
- * base address of the PCI memory or PCI I/O area on the Hades.
- */
-
- if ((result = hades_read_config_byte(dev, PCI_HEADER_TYPE,
- &header_type)) != PCIBIOS_SUCCESSFUL)
- return result;
-
- if (((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_1)) ||
- ((header_type != PCI_HEADER_TYPE_BRIDGE) && ((where >= PCI_BASE_ADDRESS_2) &&
- (where <= PCI_BASE_ADDRESS_5))))
- {
- if ((value & PCI_BASE_ADDRESS_SPACE) ==
- PCI_BASE_ADDRESS_SPACE_IO)
- {
- /*
- * I/O address. Check if the address is valid address on
- * the Hades (pci_io_base_virt <= value < pci_io_base_virt +
- * HADES_VIRT_IO_SIZE) or if the value is 0xffffffff. If not
- * true do not write the base address register. If it is a
- * valid base address subtract 'pci_io_base_virt' from the value.
- */
-
- if ((value >= pci_io_base_virt) && (value < (pci_io_base_virt +
- HADES_VIRT_IO_SIZE)))
- value -= pci_io_base_virt;
- else
- {
- if (value != 0xffffffff)
- return PCIBIOS_SET_FAILED;
- }
- }
- else
- {
- /*
- * Memory address. Check if the address is valid address on
- * the Hades (HADES_MEM_BASE <= value < HADES_MEM_BASE + HADES_MEM_SIZE) or
- * if the value is 0xffffffff. If not true do not write
- * the base address register. If it is a valid base address
- * subtract HADES_MEM_BASE from the value.
- */
-
- if ((value >= HADES_MEM_BASE) && (value < (HADES_MEM_BASE + HADES_MEM_SIZE)))
- value -= HADES_MEM_BASE;
- else
- {
- if (value != 0xffffffff)
- return PCIBIOS_SET_FAILED;
- }
- }
- }
-
- *pci_addr = cpu_to_le32(value);
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * static inline void hades_fixup(void)
- *
- * Assign IRQ numbers as used by Linux to the interrupt pins
- * of the PCI cards.
- */
-
-static void __init hades_fixup(int pci_modify)
-{
- char irq_tab[4] = {
- [0] = IRQ_TT_MFP_IO0, /* Slot 0. */
- [1] = IRQ_TT_MFP_IO1, /* Slot 1. */
- [2] = IRQ_TT_MFP_SCC, /* Slot 2. */
- [3] = IRQ_TT_MFP_SCSIDMA /* Slot 3. */
- };
- struct pci_dev *dev = NULL;
- unsigned char slot;
-
- /*
- * Go through all devices, fixing up irqs as we see fit:
- */
-
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL)
- {
- if (dev->class >> 16 != PCI_BASE_CLASS_BRIDGE)
- {
- slot = PCI_SLOT(dev->devfn); /* Determine slot number. */
- dev->irq = irq_tab[slot];
- if (pci_modify)
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
- }
- }
-}
-
-/*
- * static void hades_conf_device(struct pci_dev *dev)
- *
- * Machine dependent Configure the given device.
- *
- * Parameters:
- *
- * dev - the pci device.
- */
-
-static void __init hades_conf_device(struct pci_dev *dev)
-{
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
-}
-
-static struct pci_ops hades_pci_ops = {
- .read_byte = hades_read_config_byte,
- .read_word = hades_read_config_word,
- .read_dword = hades_read_config_dword,
- .write_byte = hades_write_config_byte,
- .write_word = hades_write_config_word,
- .write_dword = hades_write_config_dword
-};
-
-/*
- * struct pci_bus_info *init_hades_pci(void)
- *
- * Machine specific initialisation:
- *
- * - Allocate and initialise a 'pci_bus_info' structure
- * - Initialise hardware
- *
- * Result: pointer to 'pci_bus_info' structure.
- */
-
-struct pci_bus_info * __init init_hades_pci(void)
-{
- struct pci_bus_info *bus;
- int i;
-
- /*
- * Remap I/O and configuration space.
- */
-
- pci_io_base_virt = (unsigned long) ioremap(HADES_IO_BASE, HADES_VIRT_IO_SIZE);
-
- for (i = 0; i < N_SLOTS; i++)
- pci_conf_base_virt[i] = (unsigned long) ioremap(pci_conf_base_phys[i], 0x10000);
-
- /*
- * Allocate memory for bus info structure.
- */
-
- bus = kzalloc(sizeof(struct pci_bus_info), GFP_KERNEL);
- if (unlikely(!bus))
- goto iounmap_base_virt;
-
- /*
- * Claim resources. The m68k has no separate I/O space, both
- * PCI memory space and PCI I/O space are in memory space. Therefore
- * the I/O resources are requested in memory space as well.
- */
-
- if (unlikely(request_resource(&iomem_resource, &config_space) != 0))
- goto free_bus;
-
- if (unlikely(request_resource(&iomem_resource, &io_space) != 0))
- goto release_config_space;
-
- bus->mem_space.start = HADES_MEM_BASE;
- bus->mem_space.end = HADES_MEM_BASE + HADES_MEM_SIZE - 1;
- bus->mem_space.name = pci_mem_name;
-#if 1
- if (unlikely(request_resource(&iomem_resource, &bus->mem_space) != 0))
- goto release_io_space;
-#endif
- bus->io_space.start = pci_io_base_virt;
- bus->io_space.end = pci_io_base_virt + HADES_VIRT_IO_SIZE - 1;
- bus->io_space.name = pci_io_name;
-#if 1
- if (unlikely(request_resource(&ioport_resource, &bus->io_space) != 0))
- goto release_bus_mem_space;
-#endif
- /*
- * Set hardware dependent functions.
- */
-
- bus->m68k_pci_ops = &hades_pci_ops;
- bus->fixup = hades_fixup;
- bus->conf_device = hades_conf_device;
-
- /*
- * Select high to low edge for PCI interrupts.
- */
-
- tt_mfp.active_edge &= ~0x27;
-
- return bus;
-
-release_bus_mem_space:
- release_resource(&bus->mem_space);
-release_io_space:
- release_resource(&io_space);
-release_config_space:
- release_resource(&config_space);
-free_bus:
- kfree(bus);
-iounmap_base_virt:
- iounmap((void *)pci_io_base_virt);
-
- for (i = 0; i < N_SLOTS; i++)
- iounmap((void *)pci_conf_base_virt[i]);
-
- return NULL;
-}
-#endif
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index e0d3c8bfb408..1edde27fa32d 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -20,6 +20,9 @@
#include <asm/atariints.h>
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL_GPL(rtc_lock);
+
void __init
atari_sched_init(irq_handler_t timer_routine)
{
@@ -191,13 +194,14 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
}
if (!(ctrl & RTC_DM_BINARY)) {
- BIN_TO_BCD(sec);
- BIN_TO_BCD(min);
- BIN_TO_BCD(hour);
- BIN_TO_BCD(day);
- BIN_TO_BCD(mon);
- BIN_TO_BCD(year);
- if (wday >= 0) BIN_TO_BCD(wday);
+ sec = bin2bcd(sec);
+ min = bin2bcd(min);
+ hour = bin2bcd(hour);
+ day = bin2bcd(day);
+ mon = bin2bcd(mon);
+ year = bin2bcd(year);
+ if (wday >= 0)
+ wday = bin2bcd(wday);
}
}
@@ -252,13 +256,13 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
}
if (!(ctrl & RTC_DM_BINARY)) {
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
- BCD_TO_BIN(day);
- BCD_TO_BIN(mon);
- BCD_TO_BIN(year);
- BCD_TO_BIN(wday);
+ sec = bcd2bin(sec);
+ min = bcd2bin(min);
+ hour = bcd2bin(hour);
+ day = bcd2bin(day);
+ mon = bcd2bin(mon);
+ year = bcd2bin(year);
+ wday = bcd2bin(wday);
}
if (!(ctrl & RTC_24H)) {
@@ -318,7 +322,7 @@ int atari_tt_set_clock_mmss (unsigned long nowtime)
rtc_minutes = RTC_READ (RTC_MINUTES);
if (!(save_control & RTC_DM_BINARY))
- BCD_TO_BIN (rtc_minutes);
+ rtc_minutes = bcd2bin(rtc_minutes);
/* Since we're only adjusting minutes and seconds, don't interfere
with hour overflow. This avoids messing with unknown time zones
@@ -329,8 +333,8 @@ int atari_tt_set_clock_mmss (unsigned long nowtime)
{
if (!(save_control & RTC_DM_BINARY))
{
- BIN_TO_BCD (real_seconds);
- BIN_TO_BCD (real_minutes);
+ real_seconds = bin2bcd(real_seconds);
+ real_minutes = bin2bcd(real_minutes);
}
RTC_WRITE (RTC_SECONDS, real_seconds);
RTC_WRITE (RTC_MINUTES, real_minutes);
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 9433a88a33c4..65c9204ab9ac 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -25,6 +25,7 @@
#include <linux/genhd.h>
#include <linux/rtc.h>
#include <linux/interrupt.h>
+#include <linux/bcd.h>
#include <asm/bootinfo.h>
#include <asm/system.h>
@@ -46,9 +47,6 @@ extern void bvme6000_reset (void);
extern void bvme6000_waitbut(void);
void bvme6000_set_vectors (void);
-static unsigned char bcd2bin (unsigned char b);
-static unsigned char bin2bcd (unsigned char b);
-
/* Save tick handler routine pointer, will point to do_timer() in
* kernel/sched.c, called via bvme6000_process_int() */
@@ -264,17 +262,6 @@ unsigned long bvme6000_gettimeoffset (void)
return v;
}
-static unsigned char bcd2bin (unsigned char b)
-{
- return ((b>>4)*10 + (b&15));
-}
-
-static unsigned char bin2bcd (unsigned char b)
-{
- return (((b/10)*16) + (b%10));
-}
-
-
/*
* Looks like op is non-zero for setting the clock, and zero for
* reading the clock.
diff --git a/arch/m68k/bvme6000/rtc.c b/arch/m68k/bvme6000/rtc.c
index e8ac3f7d72df..808c9018b115 100644
--- a/arch/m68k/bvme6000/rtc.c
+++ b/arch/m68k/bvme6000/rtc.c
@@ -57,16 +57,16 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
rtc->msr = 0x40;
memset(&wtime, 0, sizeof(struct rtc_time));
do {
- wtime.tm_sec = BCD2BIN(rtc->bcd_sec);
- wtime.tm_min = BCD2BIN(rtc->bcd_min);
- wtime.tm_hour = BCD2BIN(rtc->bcd_hr);
- wtime.tm_mday = BCD2BIN(rtc->bcd_dom);
- wtime.tm_mon = BCD2BIN(rtc->bcd_mth)-1;
- wtime.tm_year = BCD2BIN(rtc->bcd_year);
+ wtime.tm_sec = bcd2bin(rtc->bcd_sec);
+ wtime.tm_min = bcd2bin(rtc->bcd_min);
+ wtime.tm_hour = bcd2bin(rtc->bcd_hr);
+ wtime.tm_mday = bcd2bin(rtc->bcd_dom);
+ wtime.tm_mon = bcd2bin(rtc->bcd_mth)-1;
+ wtime.tm_year = bcd2bin(rtc->bcd_year);
if (wtime.tm_year < 70)
wtime.tm_year += 100;
- wtime.tm_wday = BCD2BIN(rtc->bcd_dow)-1;
- } while (wtime.tm_sec != BCD2BIN(rtc->bcd_sec));
+ wtime.tm_wday = bcd2bin(rtc->bcd_dow)-1;
+ } while (wtime.tm_sec != bcd2bin(rtc->bcd_sec));
rtc->msr = msr;
local_irq_restore(flags);
return copy_to_user(argp, &wtime, sizeof wtime) ?
@@ -114,14 +114,14 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
rtc->t0cr_rtmr = yrs%4;
rtc->bcd_tenms = 0;
- rtc->bcd_sec = BIN2BCD(sec);
- rtc->bcd_min = BIN2BCD(min);
- rtc->bcd_hr = BIN2BCD(hrs);
- rtc->bcd_dom = BIN2BCD(day);
- rtc->bcd_mth = BIN2BCD(mon);
- rtc->bcd_year = BIN2BCD(yrs%100);
+ rtc->bcd_sec = bin2bcd(sec);
+ rtc->bcd_min = bin2bcd(min);
+ rtc->bcd_hr = bin2bcd(hrs);
+ rtc->bcd_dom = bin2bcd(day);
+ rtc->bcd_mth = bin2bcd(mon);
+ rtc->bcd_year = bin2bcd(yrs%100);
if (rtc_tm.tm_wday >= 0)
- rtc->bcd_dow = BIN2BCD(rtc_tm.tm_wday+1);
+ rtc->bcd_dow = bin2bcd(rtc_tm.tm_wday+1);
rtc->t0cr_rtmr = yrs%4 | 0x08;
rtc->msr = msr;
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 3a7f62225504..55d5d6b680a2 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -14,5 +14,4 @@ obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
devres-y = ../../../kernel/irq/devres.o
-obj-$(CONFIG_PCI) += bios32.o
obj-y$(CONFIG_MMU_SUN3) += dma.o # no, it's not a typo
diff --git a/arch/m68k/kernel/bios32.c b/arch/m68k/kernel/bios32.c
deleted file mode 100644
index af170c2be735..000000000000
--- a/arch/m68k/kernel/bios32.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- * bios32.c - PCI BIOS functions for m68k systems.
- *
- * Written by Wout Klaren.
- *
- * Based on the DEC Alpha bios32.c by Dave Rusling and David Mosberger.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#if 0
-# define DBG_DEVS(args) printk args
-#else
-# define DBG_DEVS(args)
-#endif
-
-#ifdef CONFIG_PCI
-
-/*
- * PCI support for Linux/m68k. Currently only the Hades is supported.
- *
- * The support for PCI bridges in the DEC Alpha version has
- * been removed in this version.
- */
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/uaccess.h>
-
-#define KB 1024
-#define MB (1024*KB)
-#define GB (1024*MB)
-
-#define MAJOR_REV 0
-#define MINOR_REV 5
-
-/*
- * Align VAL to ALIGN, which must be a power of two.
- */
-
-#define ALIGN(val,align) (((val) + ((align) - 1)) & ~((align) - 1))
-
-/*
- * Offsets relative to the I/O and memory base addresses from where resources
- * are allocated.
- */
-
-#define IO_ALLOC_OFFSET 0x00004000
-#define MEM_ALLOC_OFFSET 0x04000000
-
-/*
- * Declarations of hardware specific initialisation functions.
- */
-
-extern struct pci_bus_info *init_hades_pci(void);
-
-/*
- * Bus info structure of the PCI bus. A pointer to this structure is
- * put in the sysdata member of the pci_bus structure.
- */
-
-static struct pci_bus_info *bus_info;
-
-static int pci_modify = 1; /* If set, layout the PCI bus ourself. */
-static int skip_vga; /* If set do not modify base addresses
- of vga cards.*/
-static int disable_pci_burst; /* If set do not allow PCI bursts. */
-
-static unsigned int io_base;
-static unsigned int mem_base;
-
-/*
- * static void disable_dev(struct pci_dev *dev)
- *
- * Disable PCI device DEV so that it does not respond to I/O or memory
- * accesses.
- *
- * Parameters:
- *
- * dev - device to disable.
- */
-
-static void __init disable_dev(struct pci_dev *dev)
-{
- unsigned short cmd;
-
- if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
- (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
- (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga)
- return;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
- cmd &= (~PCI_COMMAND_IO & ~PCI_COMMAND_MEMORY & ~PCI_COMMAND_MASTER);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-}
-
-/*
- * static void layout_dev(struct pci_dev *dev)
- *
- * Layout memory and I/O for a device.
- *
- * Parameters:
- *
- * device - device to layout memory and I/O for.
- */
-
-static void __init layout_dev(struct pci_dev *dev)
-{
- unsigned short cmd;
- unsigned int base, mask, size, reg;
- unsigned int alignto;
- int i;
-
- /*
- * Skip video cards if requested.
- */
-
- if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
- (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
- (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga)
- return;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
- for (reg = PCI_BASE_ADDRESS_0, i = 0; reg <= PCI_BASE_ADDRESS_5; reg += 4, i++)
- {
- /*
- * Figure out how much space and of what type this
- * device wants.
- */
-
- pci_write_config_dword(dev, reg, 0xffffffff);
- pci_read_config_dword(dev, reg, &base);
-
- if (!base)
- {
- /* this base-address register is unused */
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- continue;
- }
-
- /*
- * We've read the base address register back after
- * writing all ones and so now we must decode it.
- */
-
- if (base & PCI_BASE_ADDRESS_SPACE_IO)
- {
- /*
- * I/O space base address register.
- */
-
- cmd |= PCI_COMMAND_IO;
-
- base &= PCI_BASE_ADDRESS_IO_MASK;
- mask = (~base << 1) | 0x1;
- size = (mask & base) & 0xffffffff;
-
- /*
- * Align to multiple of size of minimum base.
- */
-
- alignto = max_t(unsigned int, 0x040, size);
- base = ALIGN(io_base, alignto);
- io_base = base + size;
- pci_write_config_dword(dev, reg, base | PCI_BASE_ADDRESS_SPACE_IO);
-
- dev->resource[i].start = base;
- dev->resource[i].end = dev->resource[i].start + size - 1;
- dev->resource[i].flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
-
- DBG_DEVS(("layout_dev: IO address: %lX\n", base));
- }
- else
- {
- unsigned int type;
-
- /*
- * Memory space base address register.
- */
-
- cmd |= PCI_COMMAND_MEMORY;
- type = base & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
- base &= PCI_BASE_ADDRESS_MEM_MASK;
- mask = (~base << 1) | 0x1;
- size = (mask & base) & 0xffffffff;
- switch (type)
- {
- case PCI_BASE_ADDRESS_MEM_TYPE_32:
- case PCI_BASE_ADDRESS_MEM_TYPE_64:
- break;
-
- case PCI_BASE_ADDRESS_MEM_TYPE_1M:
- printk("bios32 WARNING: slot %d, function %d "
- "requests memory below 1MB---don't "
- "know how to do that.\n",
- PCI_SLOT(dev->devfn),
- PCI_FUNC(dev->devfn));
- continue;
- }
-
- /*
- * Align to multiple of size of minimum base.
- */
-
- alignto = max_t(unsigned int, 0x1000, size);
- base = ALIGN(mem_base, alignto);
- mem_base = base + size;
- pci_write_config_dword(dev, reg, base);
-
- dev->resource[i].start = base;
- dev->resource[i].end = dev->resource[i].start + size - 1;
- dev->resource[i].flags = IORESOURCE_MEM;
-
- if (type == PCI_BASE_ADDRESS_MEM_TYPE_64)
- {
- /*
- * 64-bit address, set the highest 32 bits
- * to zero.
- */
-
- reg += 4;
- pci_write_config_dword(dev, reg, 0);
-
- i++;
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
- }
- }
-
- /*
- * Enable device:
- */
-
- if (dev->class >> 8 == PCI_CLASS_NOT_DEFINED ||
- dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA ||
- dev->class >> 8 == PCI_CLASS_DISPLAY_VGA ||
- dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)
- {
- /*
- * All of these (may) have I/O scattered all around
- * and may not use i/o-base address registers at all.
- * So we just have to always enable I/O to these
- * devices.
- */
- cmd |= PCI_COMMAND_IO;
- }
-
- pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER);
-
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, (disable_pci_burst) ? 0 : 32);
-
- if (bus_info != NULL)
- bus_info->conf_device(dev); /* Machine dependent configuration. */
-
- DBG_DEVS(("layout_dev: bus %d slot 0x%x VID 0x%x DID 0x%x class 0x%x\n",
- dev->bus->number, PCI_SLOT(dev->devfn), dev->vendor, dev->device, dev->class));
-}
-
-/*
- * static void layout_bus(struct pci_bus *bus)
- *
- * Layout memory and I/O for all devices on the given bus.
- *
- * Parameters:
- *
- * bus - bus.
- */
-
-static void __init layout_bus(struct pci_bus *bus)
-{
- unsigned int bio, bmem;
- struct pci_dev *dev;
-
- DBG_DEVS(("layout_bus: starting bus %d\n", bus->number));
-
- if (!bus->devices && !bus->children)
- return;
-
- /*
- * Align the current bases on appropriate boundaries (4K for
- * IO and 1MB for memory).
- */
-
- bio = io_base = ALIGN(io_base, 4*KB);
- bmem = mem_base = ALIGN(mem_base, 1*MB);
-
- /*
- * PCI devices might have been setup by a PCI BIOS emulation
- * running under TOS. In these cases there is a
- * window during which two devices may have an overlapping
- * address range. To avoid this causing trouble, we first
- * turn off the I/O and memory address decoders for all PCI
- * devices. They'll be re-enabled only once all address
- * decoders are programmed consistently.
- */
-
- DBG_DEVS(("layout_bus: disable_dev for bus %d\n", bus->number));
-
- for (dev = bus->devices; dev; dev = dev->sibling)
- {
- if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
- (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
- disable_dev(dev);
- }
-
- /*
- * Allocate space to each device:
- */
-
- DBG_DEVS(("layout_bus: starting bus %d devices\n", bus->number));
-
- for (dev = bus->devices; dev; dev = dev->sibling)
- {
- if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
- (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
- layout_dev(dev);
- }
-
- DBG_DEVS(("layout_bus: bus %d finished\n", bus->number));
-}
-
-/*
- * static void pcibios_fixup(void)
- *
- * Layout memory and I/O of all devices on the PCI bus if 'pci_modify' is
- * true. This might be necessary because not every m68k machine with a PCI
- * bus has a PCI BIOS. This function should be called right after
- * pci_scan_bus() in pcibios_init().
- */
-
-static void __init pcibios_fixup(void)
-{
- if (pci_modify)
- {
- /*
- * Set base addresses for allocation of I/O and memory space.
- */
-
- io_base = bus_info->io_space.start + IO_ALLOC_OFFSET;
- mem_base = bus_info->mem_space.start + MEM_ALLOC_OFFSET;
-
- /*
- * Scan the tree, allocating PCI memory and I/O space.
- */
-
- layout_bus(pci_bus_b(pci_root.next));
- }
-
- /*
- * Fix interrupt assignments, etc.
- */
-
- bus_info->fixup(pci_modify);
-}
-
-/*
- * static void pcibios_claim_resources(struct pci_bus *bus)
- *
- * Claim all resources that are assigned to devices on the given bus.
- *
- * Parameters:
- *
- * bus - bus.
- */
-
-static void __init pcibios_claim_resources(struct pci_bus *bus)
-{
- struct pci_dev *dev;
- int i;
-
- while (bus)
- {
- for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
- {
- for (i = 0; i < PCI_NUM_RESOURCES; i++)
- {
- struct resource *r = &dev->resource[i];
- struct resource *pr;
- struct pci_bus_info *bus_info = (struct pci_bus_info *) dev->sysdata;
-
- if ((r->start == 0) || (r->parent != NULL))
- continue;
-#if 1
- if (r->flags & IORESOURCE_IO)
- pr = &bus_info->io_space;
- else
- pr = &bus_info->mem_space;
-#else
- if (r->flags & IORESOURCE_IO)
- pr = &ioport_resource;
- else
- pr = &iomem_resource;
-#endif
- if (request_resource(pr, r) < 0)
- {
- printk(KERN_ERR "PCI: Address space collision on region %d of device %s\n", i, dev->name);
- }
- }
- }
-
- if (bus->children)
- pcibios_claim_resources(bus->children);
-
- bus = bus->next;
- }
-}
-
-/*
- * int pcibios_assign_resource(struct pci_dev *dev, int i)
- *
- * Assign a new address to a PCI resource.
- *
- * Parameters:
- *
- * dev - device.
- * i - resource.
- *
- * Result: 0 if successful.
- */
-
-int __init pcibios_assign_resource(struct pci_dev *dev, int i)
-{
- struct resource *r = &dev->resource[i];
- struct resource *pr = pci_find_parent_resource(dev, r);
- unsigned long size = r->end + 1;
-
- if (!pr)
- return -EINVAL;
-
- if (r->flags & IORESOURCE_IO)
- {
- if (size > 0x100)
- return -EFBIG;
-
- if (allocate_resource(pr, r, size, bus_info->io_space.start +
- IO_ALLOC_OFFSET, bus_info->io_space.end, 1024))
- return -EBUSY;
- }
- else
- {
- if (allocate_resource(pr, r, size, bus_info->mem_space.start +
- MEM_ALLOC_OFFSET, bus_info->mem_space.end, size))
- return -EBUSY;
- }
-
- if (i < 6)
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, r->start);
-
- return 0;
-}
-
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev;
- void *sysdata;
-
- sysdata = (bus->parent) ? bus->parent->sysdata : bus->sysdata;
-
- for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
- dev->sysdata = sysdata;
-}
-
-void __init pcibios_init(void)
-{
- printk("Linux/m68k PCI BIOS32 revision %x.%02x\n", MAJOR_REV, MINOR_REV);
-
- bus_info = NULL;
-#ifdef CONFIG_HADES
- if (MACH_IS_HADES)
- bus_info = init_hades_pci();
-#endif
- if (bus_info != NULL)
- {
- printk("PCI: Probing PCI hardware\n");
- pci_scan_bus(0, bus_info->m68k_pci_ops, bus_info);
- pcibios_fixup();
- pcibios_claim_resources(pci_root);
- }
- else
- printk("PCI: No PCI bus detected\n");
-}
-
-char * __init pcibios_setup(char *str)
-{
- if (!strcmp(str, "nomodify"))
- {
- pci_modify = 0;
- return NULL;
- }
- else if (!strcmp(str, "skipvga"))
- {
- skip_vga = 1;
- return NULL;
- }
- else if (!strcmp(str, "noburst"))
- {
- disable_pci_burst = 1;
- return NULL;
- }
-
- return str;
-}
-#endif /* CONFIG_PCI */
diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index 6f8c080dd9f9..2bb4245404d8 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -66,8 +66,8 @@ void dma_free_coherent(struct device *dev, size_t size,
}
EXPORT_SYMBOL(dma_free_coherent);
-inline void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
- enum dma_data_direction dir)
+void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
+ size_t size, enum dma_data_direction dir)
{
switch (dir) {
case DMA_TO_DEVICE:
diff --git a/arch/m68k/kernel/ints.c b/arch/m68k/kernel/ints.c
index ded7dd2f67b2..7e8a0d394e61 100644
--- a/arch/m68k/kernel/ints.c
+++ b/arch/m68k/kernel/ints.c
@@ -429,8 +429,9 @@ int show_interrupts(struct seq_file *p, void *v)
return 0;
}
+#ifdef CONFIG_PROC_FS
void init_irq_proc(void)
{
/* Insert /proc/irq driver here */
}
-
+#endif
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 7888cdf91f5d..3042c2bc8c58 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -78,7 +78,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
static void default_idle(void)
{
if (!need_resched())
-#if defined(MACH_ATARI_ONLY) && !defined(CONFIG_HADES)
+#if defined(MACH_ATARI_ONLY)
/* block out HSYNC on the atari (falcon) */
__asm__("stop #0x2200" : : : "cc");
#else
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index 75b8340b254b..6d813de2baf1 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -883,8 +883,7 @@ void show_trace(unsigned long *stack)
if (i % 5 == 0)
printk("\n ");
#endif
- printk(" [<%08lx>]", addr);
- print_symbol(" %s\n", addr);
+ printk(" [<%08lx>] %pS\n", addr, (void *)addr);
i++;
}
}
@@ -900,10 +899,8 @@ void show_registers(struct pt_regs *regs)
int i;
print_modules();
- printk("PC: [<%08lx>]",regs->pc);
- print_symbol(" %s", regs->pc);
- printk("\nSR: %04x SP: %p a2: %08lx\n",
- regs->sr, regs, regs->a2);
+ printk("PC: [<%08lx>] %pS\n", regs->pc, (void *)regs->pc);
+ printk("SR: %04x SP: %p a2: %08lx\n", regs->sr, regs, regs->a2);
printk("d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
regs->d0, regs->d1, regs->d2, regs->d3);
printk("d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 99b0784c0552..f846d4e3e5e1 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -34,10 +34,10 @@ SECTIONS
CONSTRUCTORS
}
- .bss : { *(.bss) } /* BSS */
-
. = ALIGN(16);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) } :data
+ .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+
+ .bss : { *(.bss) } /* BSS */
_edata = .; /* End of data section */
@@ -48,7 +48,7 @@ SECTIONS
_sinittext = .;
INIT_TEXT
_einittext = .;
- }
+ } :data
.init.data : { INIT_DATA }
. = ALIGN(16);
__setup_start = .;
@@ -74,6 +74,7 @@ SECTIONS
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
#endif
+ NOTES
. = ALIGN(8192);
__init_end = .;
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index 46b7d6035aab..df620ac2a296 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -66,8 +66,10 @@ static struct vm_struct *get_io_area(unsigned long size)
for (p = &iolist; (tmp = *p) ; p = &tmp->next) {
if (size + addr < (unsigned long)tmp->addr)
break;
- if (addr > KMAP_END-size)
+ if (addr > KMAP_END-size) {
+ kfree(area);
return NULL;
+ }
addr = tmp->size + (unsigned long)tmp->addr;
}
area->addr = (void *)addr;
diff --git a/arch/m68k/mvme16x/rtc.c b/arch/m68k/mvme16x/rtc.c
index 432a9f13b2ed..cea5e3e4e636 100644
--- a/arch/m68k/mvme16x/rtc.c
+++ b/arch/m68k/mvme16x/rtc.c
@@ -52,15 +52,15 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
/* Ensure clock and real-time-mode-register are accessible */
rtc->ctrl = RTC_READ;
memset(&wtime, 0, sizeof(struct rtc_time));
- wtime.tm_sec = BCD2BIN(rtc->bcd_sec);
- wtime.tm_min = BCD2BIN(rtc->bcd_min);
- wtime.tm_hour = BCD2BIN(rtc->bcd_hr);
- wtime.tm_mday = BCD2BIN(rtc->bcd_dom);
- wtime.tm_mon = BCD2BIN(rtc->bcd_mth)-1;
- wtime.tm_year = BCD2BIN(rtc->bcd_year);
+ wtime.tm_sec = bcd2bin(rtc->bcd_sec);
+ wtime.tm_min = bcd2bin(rtc->bcd_min);
+ wtime.tm_hour = bcd2bin(rtc->bcd_hr);
+ wtime.tm_mday = bcd2bin(rtc->bcd_dom);
+ wtime.tm_mon = bcd2bin(rtc->bcd_mth)-1;
+ wtime.tm_year = bcd2bin(rtc->bcd_year);
if (wtime.tm_year < 70)
wtime.tm_year += 100;
- wtime.tm_wday = BCD2BIN(rtc->bcd_dow)-1;
+ wtime.tm_wday = bcd2bin(rtc->bcd_dow)-1;
rtc->ctrl = 0;
local_irq_restore(flags);
return copy_to_user(argp, &wtime, sizeof wtime) ?
@@ -104,12 +104,12 @@ static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
local_irq_save(flags);
rtc->ctrl = RTC_WRITE;
- rtc->bcd_sec = BIN2BCD(sec);
- rtc->bcd_min = BIN2BCD(min);
- rtc->bcd_hr = BIN2BCD(hrs);
- rtc->bcd_dom = BIN2BCD(day);
- rtc->bcd_mth = BIN2BCD(mon);
- rtc->bcd_year = BIN2BCD(yrs%100);
+ rtc->bcd_sec = bin2bcd(sec);
+ rtc->bcd_min = bin2bcd(min);
+ rtc->bcd_hr = bin2bcd(hrs);
+ rtc->bcd_dom = bin2bcd(day);
+ rtc->bcd_mth = bin2bcd(mon);
+ rtc->bcd_year = bin2bcd(yrs%100);
rtc->ctrl = 0;
local_irq_restore(flags);
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index be9de2f3dc48..9c7eefa3f98a 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -23,6 +23,7 @@
#include <linux/serial_reg.h>
#include <linux/rtc.h>
#include <linux/vt_kern.h>
+#include <linux/bcd.h>
#include <asm/io.h>
#include <asm/rtc.h>
@@ -216,17 +217,6 @@ int q40_parse_bootinfo(const struct bi_record *rec)
}
-static inline unsigned char bcd2bin(unsigned char b)
-{
- return (b >> 4) * 10 + (b & 15);
-}
-
-static inline unsigned char bin2bcd(unsigned char b)
-{
- return (b / 10) * 16 + (b % 10);
-}
-
-
static unsigned long q40_gettimeoffset(void)
{
return 5000 * (ql_ticks != 0);
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index f5eaafb00d21..536a04aaf22f 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -47,23 +47,23 @@ int sun3x_hwclk(int set, struct rtc_time *t)
if(set) {
h->csr |= C_WRITE;
- h->sec = BIN2BCD(t->tm_sec);
- h->min = BIN2BCD(t->tm_min);
- h->hour = BIN2BCD(t->tm_hour);
- h->wday = BIN2BCD(t->tm_wday);
- h->mday = BIN2BCD(t->tm_mday);
- h->month = BIN2BCD(t->tm_mon);
- h->year = BIN2BCD(t->tm_year);
+ h->sec = bin2bcd(t->tm_sec);
+ h->min = bin2bcd(t->tm_min);
+ h->hour = bin2bcd(t->tm_hour);
+ h->wday = bin2bcd(t->tm_wday);
+ h->mday = bin2bcd(t->tm_mday);
+ h->month = bin2bcd(t->tm_mon);
+ h->year = bin2bcd(t->tm_year);
h->csr &= ~C_WRITE;
} else {
h->csr |= C_READ;
- t->tm_sec = BCD2BIN(h->sec);
- t->tm_min = BCD2BIN(h->min);
- t->tm_hour = BCD2BIN(h->hour);
- t->tm_wday = BCD2BIN(h->wday);
- t->tm_mday = BCD2BIN(h->mday);
- t->tm_mon = BCD2BIN(h->month);
- t->tm_year = BCD2BIN(h->year);
+ t->tm_sec = bcd2bin(h->sec);
+ t->tm_min = bcd2bin(h->min);
+ t->tm_hour = bcd2bin(h->hour);
+ t->tm_wday = bcd2bin(h->wday);
+ t->tm_mday = bcd2bin(h->mday);
+ t->tm_mon = bcd2bin(h->month);
+ t->tm_year = bcd2bin(h->year);
h->csr &= ~C_READ;
}
diff --git a/arch/mips/include/asm/mach-generic/ide.h b/arch/mips/include/asm/mach-generic/ide.h
index 73008f7bdc93..9c93a5b36f2a 100644
--- a/arch/mips/include/asm/mach-generic/ide.h
+++ b/arch/mips/include/asm/mach-generic/ide.h
@@ -19,35 +19,6 @@
#include <linux/stddef.h>
#include <asm/processor.h>
-static __inline__ int ide_probe_legacy(void)
-{
-#ifdef CONFIG_PCI
- struct pci_dev *dev;
- /*
- * This can be called on the ide_setup() path, super-early in
- * boot. But the down_read() will enable local interrupts,
- * which can cause some machines to crash. So here we detect
- * and flag that situation and bail out early.
- */
- if (no_pci_devices())
- return 0;
- dev = pci_get_class(PCI_CLASS_BRIDGE_EISA << 8, NULL);
- if (dev)
- goto found;
- dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
- if (dev)
- goto found;
- return 0;
-found:
- pci_dev_put(dev);
- return 1;
-#elif defined(CONFIG_EISA) || defined(CONFIG_ISA)
- return 1;
-#else
- return 0;
-#endif
-}
-
/* MIPS port and memory-mapped I/O string operations. */
static inline void __ide_flush_prologue(void)
{
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index a00359e8f7a8..9606d2bd1dd9 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -53,11 +53,6 @@ extern struct fd_ops no_fd_ops;
struct fd_ops *fd_ops;
#endif
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-extern struct ide_ops no_ide_ops;
-struct ide_ops *ide_ops;
-#endif
-
extern struct rtc_ops no_rtc_ops;
struct rtc_ops *rtc_ops;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 41b4361bbf6e..02b596b9cf6a 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -148,6 +148,64 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+struct pcmcia_config_check {
+ unsigned long ctl_base;
+ int skip_vcc;
+ int is_kme;
+};
+
+static int pcmcia_check_one_config(struct pcmcia_device *pdev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct pcmcia_config_check *stk = priv_data;
+
+ /* Check for matching Vcc, unless we're desperate */
+ if (!stk->skip_vcc) {
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ pdev->io.BasePort1 = io->win[0].base;
+ pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ if (io->nwin == 2) {
+ pdev->io.NumPorts1 = 8;
+ pdev->io.BasePort2 = io->win[1].base;
+ pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort2;
+ } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
+ pdev->io.NumPorts1 = io->win[0].len;
+ pdev->io.NumPorts2 = 0;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+ } else
+ return -ENODEV;
+ /* If we've got this far, we're done */
+ return 0;
+ }
+ return -ENODEV;
+}
+
/**
* pcmcia_init_one - attach a PCMCIA interface
* @pdev: pcmcia device
@@ -161,19 +219,11 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
struct ata_host *host;
struct ata_port *ap;
struct ata_pcmcia_info *info;
- tuple_t tuple;
- struct {
- unsigned short buf[128];
- cisparse_t parse;
- config_info_t conf;
- cistpl_cftable_entry_t dflt;
- } *stk = NULL;
- cistpl_cftable_entry_t *cfg;
- int pass, last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
+ struct pcmcia_config_check *stk = NULL;
+ int last_ret = 0, last_fn = 0, is_kme = 0, ret = -ENOMEM, p;
unsigned long io_base, ctl_base;
void __iomem *io_addr, *ctl_addr;
int n_ports = 1;
-
struct ata_port_operations *ops = &pcmcia_port_ops;
info = kzalloc(sizeof(*info), GFP_KERNEL);
@@ -193,96 +243,27 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
pdev->conf.Attributes = CONF_ENABLE_IRQ;
pdev->conf.IntType = INT_MEMORY_AND_IO;
- /* Allocate resoure probing structures */
-
- stk = kzalloc(sizeof(*stk), GFP_KERNEL);
- if (!stk)
- goto out1;
-
- cfg = &stk->parse.cftable_entry;
-
- /* Tuples we are walking */
- tuple.TupleData = (cisdata_t *)&stk->buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
-
/* See if we have a manufacturer identifier. Use it to set is_kme for
vendor quirks */
is_kme = ((pdev->manf_id == MANFID_KME) &&
((pdev->card_id == PRODID_KME_KXLC005_A) ||
(pdev->card_id == PRODID_KME_KXLC005_B)));
- /* Not sure if this is right... look up the current Vcc */
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(pdev, &stk->conf));
-/* link->conf.Vcc = stk->conf.Vcc; */
-
- pass = io_base = ctl_base = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
-
- /* Now munch the resources looking for a suitable set */
- while (1) {
- if (pcmcia_get_tuple_data(pdev, &tuple) != 0)
- goto next_entry;
- if (pcmcia_parse_tuple(pdev, &tuple, &stk->parse) != 0)
- goto next_entry;
- /* Check for matching Vcc, unless we're desperate */
- if (!pass) {
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- }
- }
+ /* Allocate resoure probing structures */
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- pdev->conf.Vpp = stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
- pdev->conf.ConfigIndex = cfg->index;
- pdev->io.BasePort1 = io->win[0].base;
- pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- if (io->nwin == 2) {
- pdev->io.NumPorts1 = 8;
- pdev->io.BasePort2 = io->win[1].base;
- pdev->io.NumPorts2 = (is_kme) ? 2 : 1;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
- goto next_entry;
- io_base = pdev->io.BasePort1;
- ctl_base = pdev->io.BasePort2;
- } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- pdev->io.NumPorts1 = io->win[0].len;
- pdev->io.NumPorts2 = 0;
- if (pcmcia_request_io(pdev, &pdev->io) != 0)
- goto next_entry;
- io_base = pdev->io.BasePort1;
- ctl_base = pdev->io.BasePort1 + 0x0e;
- } else
- goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
-next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
- if (pass) {
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(pdev, &tuple));
- } else if (pcmcia_get_next_tuple(pdev, &tuple) != 0) {
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(pdev, &tuple));
- memset(&stk->dflt, 0, sizeof(stk->dflt));
- pass++;
- }
- }
+ stk = kzalloc(sizeof(*stk), GFP_KERNEL);
+ if (!stk)
+ goto out1;
+ stk->is_kme = is_kme;
+ stk->skip_vcc = io_base = ctl_base = 0;
+ if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) {
+ stk->skip_vcc = 1;
+ if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk))
+ goto failed; /* No suitable config found */
+ }
+ io_base = pdev->io.BasePort1;
+ ctl_base = stk->ctl_base;
CS_CHECK(RequestIRQ, pcmcia_request_irq(pdev, &pdev->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(pdev, &pdev->conf));
@@ -384,6 +365,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
+ PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
@@ -404,9 +386,9 @@ static struct pcmcia_device_id pcmcia_devices[] = {
PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
- PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
+ PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 49f274197b16..432cf4018291 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1882,10 +1882,6 @@ static int __init atari_floppy_init (void)
/* Amiga, Mac, ... don't have Atari-compatible floppy :-) */
return -ENODEV;
- if (MACH_IS_HADES)
- /* Hades doesn't have Atari-compatible floppy */
- return -ENODEV;
-
if (register_blkdev(FLOPPY_MAJOR,"fd"))
return -EBUSY;
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index bcf57927b7a8..e6ee21d99d92 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -901,23 +901,23 @@ static int bluecard_config(struct pcmcia_device *link)
for (n = 0; n < 0x400; n += 0x40) {
link->io.BasePort1 = n ^ 0x300;
i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
+ if (i == 0)
break;
}
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIO, i);
goto failed;
}
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 27058477cc8b..2cbe70b66470 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -678,101 +678,78 @@ static void bt3c_detach(struct pcmcia_device *link)
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int bt3c_check_config(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ unsigned long try = (unsigned long) priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
+ (cf->io.win[0].base != 0)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = (try == 0) ? 16 :
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int bt3c_config(struct pcmcia_device *link)
{
- static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
bt3c_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
- int i, j, try;
-
- /* First pass: look for a config entry that looks normal. */
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, &tuple, &parse);
- }
- }
+ int i;
+ unsigned long try;
+
+ /* First pass: look for a config entry that looks normal.
+ Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 2; try++)
+ if (!pcmcia_loop_config(link, bt3c_check_config, (void *) try))
+ goto found_port;
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, &tuple, &parse);
- }
+ if (!pcmcia_loop_config(link, bt3c_check_config_notpicky, NULL))
+ goto found_port;
-found_port:
- if (i != CS_SUCCESS) {
- BT_ERR("No usable port range found");
- cs_error(link, RequestIO, i);
- goto failed;
- }
+ BT_ERR("No usable port range found");
+ cs_error(link, RequestIO, -ENODEV);
+ goto failed;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 68d1d258e6a4..8e556b7ff9f6 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -607,102 +607,78 @@ static void btuart_detach(struct pcmcia_device *link)
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int btuart_check_config(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ int *try = priv_data;
+
+ if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
+ (cf->io.win[0].base != 0)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.IOAddrLines = (*try == 0) ? 16 :
+ cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int btuart_check_config_notpicky(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
+ int j;
+
+ if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
+ for (j = 0; j < 5; j++) {
+ p_dev->io.BasePort1 = base[j];
+ p_dev->io.IOAddrLines = base[j] ? 16 : 3;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ }
+ return -ENODEV;
}
static int btuart_config(struct pcmcia_device *link)
{
- static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
btuart_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
- int i, j, try;
-
- /* First pass: look for a config entry that looks normal. */
- tuple.TupleData = (cisdata_t *) buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- /* Two tries: without IO aliases, then with aliases */
- for (try = 0; try < 2; try++) {
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if (i != CS_SUCCESS)
- goto next_entry;
- if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
-next_entry:
- i = next_tuple(link, &tuple, &parse);
- }
- }
+ int i;
+ int try;
+
+ /* First pass: look for a config entry that looks normal.
+ Two tries: without IO aliases, then with aliases */
+ for (try = 0; try < 2; try++)
+ if (!pcmcia_loop_config(link, btuart_check_config, &try))
+ goto found_port;
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
- && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
- link->conf.ConfigIndex = cf->index;
- for (j = 0; j < 5; j++) {
- link->io.BasePort1 = base[j];
- link->io.IOAddrLines = base[j] ? 16 : 3;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- goto found_port;
- }
- }
- i = next_tuple(link, &tuple, &parse);
- }
+ if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL))
+ goto found_port;
-found_port:
- if (i != CS_SUCCESS) {
- BT_ERR("No usable port range found");
- cs_error(link, RequestIO, i);
- goto failed;
- }
+ BT_ERR("No usable port range found");
+ cs_error(link, RequestIO, -ENODEV);
+ goto failed;
+found_port:
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index dae45cdf02b2..e6e6b037695a 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -590,75 +590,40 @@ static void dtl1_detach(struct pcmcia_device *link)
kfree(info);
}
-static int get_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
+static int dtl1_confcheck(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cf,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- int i;
-
- i = pcmcia_get_tuple_data(handle, tuple);
- if (i != CS_SUCCESS)
- return i;
-
- return pcmcia_parse_tuple(handle, tuple, parse);
-}
-
-static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_first_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
-}
-
-static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse)
-{
- if (pcmcia_get_next_tuple(handle, tuple) != CS_SUCCESS)
- return CS_NO_MORE_ITEMS;
- return get_tuple(handle, tuple, parse);
+ if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
+ p_dev->io.BasePort1 = cf->io.win[0].base;
+ p_dev->io.NumPorts1 = cf->io.win[0].len; /*yo */
+ p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ if (!pcmcia_request_io(p_dev, &p_dev->io))
+ return 0;
+ }
+ return -ENODEV;
}
static int dtl1_config(struct pcmcia_device *link)
{
dtl1_info_t *info = link->priv;
- tuple_t tuple;
- u_short buf[256];
- cisparse_t parse;
- cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i;
- tuple.TupleData = (cisdata_t *)buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
-
/* Look for a generic full-sized window */
link->io.NumPorts1 = 8;
- i = first_tuple(link, &tuple, &parse);
- while (i != CS_NO_MORE_ITEMS) {
- if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
- link->conf.ConfigIndex = cf->index;
- link->io.BasePort1 = cf->io.win[0].base;
- link->io.NumPorts1 = cf->io.win[0].len; /*yo */
- link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
- i = pcmcia_request_io(link, &link->io);
- if (i == CS_SUCCESS)
- break;
- }
- i = next_tuple(link, &tuple, &parse);
- }
-
- if (i != CS_SUCCESS) {
- cs_error(link, RequestIO, i);
+ if (!pcmcia_loop_config(link, dtl1_confcheck, NULL))
goto failed;
- }
i = pcmcia_request_irq(link, &link->irq);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
- if (i != CS_SUCCESS) {
+ if (i != 0) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index f070ae7bd91a..1c5bf99895ed 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -1759,65 +1759,40 @@ static void cmm_cm4000_release(struct pcmcia_device * link)
/*==== Interface to PCMCIA Layer =======================================*/
+static int cm4000_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ if (!cfg->io.nwin)
+ return -ENODEV;
+
+ /* Get the IOaddr */
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(cfg->io.flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(cfg->io.flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ return pcmcia_request_io(p_dev, &p_dev->io);
+}
+
static int cm4000_config(struct pcmcia_device * link, int devno)
{
struct cm4000_dev *dev;
- tuple_t tuple;
- cisparse_t parse;
- u_char buf[64];
- int fail_fn, fail_rc;
- int rc;
/* read the config-tuples */
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
-
- link->io.BasePort2 = 0;
- link->io.NumPorts2 = 0;
- link->io.Attributes2 = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (rc = pcmcia_get_first_tuple(link, &tuple);
- rc == CS_SUCCESS; rc = pcmcia_get_next_tuple(link, &tuple)) {
-
- rc = pcmcia_get_tuple_data(link, &tuple);
- if (rc != CS_SUCCESS)
- continue;
- rc = pcmcia_parse_tuple(link, &tuple, &parse);
- if (rc != CS_SUCCESS)
- continue;
-
- link->conf.ConfigIndex = parse.cftable_entry.index;
-
- if (!parse.cftable_entry.io.nwin)
- continue;
-
- /* Get the IOaddr */
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = parse.cftable_entry.io.flags
- & CISTPL_IO_LINES_MASK;
-
- rc = pcmcia_request_io(link, &link->io);
- if (rc == CS_SUCCESS)
- break; /* we are done */
- }
- if (rc != CS_SUCCESS)
+ if (pcmcia_loop_config(link, cm4000_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
- if ((fail_rc =
- pcmcia_request_configuration(link, &link->conf)) != CS_SUCCESS) {
- fail_fn = RequestConfiguration;
+ if (pcmcia_request_configuration(link, &link->conf))
goto cs_release;
- }
dev = link->priv;
sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno);
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
index 0b5934bef7a4..2d7c906435b7 100644
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@@ -526,65 +526,49 @@ static void cm4040_reader_release(struct pcmcia_device *link)
return;
}
-static int reader_config(struct pcmcia_device *link, int devno)
+static int cm4040_config_check(struct pcmcia_device *p_dev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
{
- struct reader_dev *dev;
- tuple_t tuple;
- cisparse_t parse;
- u_char buf[64];
- int fail_fn, fail_rc;
int rc;
+ if (!cfg->io.nwin)
+ return -ENODEV;
+
+ /* Get the IOaddr */
+ p_dev->io.BasePort1 = cfg->io.win[0].base;
+ p_dev->io.NumPorts1 = cfg->io.win[0].len;
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(cfg->io.flags & CISTPL_IO_8BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(cfg->io.flags & CISTPL_IO_16BIT))
+ p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
+
+ rc = pcmcia_request_io(p_dev, &p_dev->io);
+ dev_printk(KERN_INFO, &handle_to_dev(p_dev),
+ "pcmcia_request_io returned 0x%x\n", rc);
+ return rc;
+}
+
- tuple.Attributes = 0;
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- tuple.TupleOffset = 0;
+static int reader_config(struct pcmcia_device *link, int devno)
+{
+ struct reader_dev *dev;
+ int fail_rc;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
link->io.Attributes2 = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- for (rc = pcmcia_get_first_tuple(link, &tuple);
- rc == CS_SUCCESS;
- rc = pcmcia_get_next_tuple(link, &tuple)) {
- rc = pcmcia_get_tuple_data(link, &tuple);
- if (rc != CS_SUCCESS)
- continue;
- rc = pcmcia_parse_tuple(link, &tuple, &parse);
- if (rc != CS_SUCCESS)
- continue;
-
- link->conf.ConfigIndex = parse.cftable_entry.index;
-
- if (!parse.cftable_entry.io.nwin)
- continue;
-
- link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
- link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
- if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- link->io.IOAddrLines = parse.cftable_entry.io.flags
- & CISTPL_IO_LINES_MASK;
- rc = pcmcia_request_io(link, &link->io);
-
- dev_printk(KERN_INFO, &handle_to_dev(link), "foo");
- if (rc == CS_SUCCESS)
- break;
- else
- dev_printk(KERN_INFO, &handle_to_dev(link),
- "pcmcia_request_io failed 0x%x\n", rc);
- }
- if (rc != CS_SUCCESS)
+
+ if (pcmcia_loop_config(link, cm4040_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
- if ((fail_rc = pcmcia_request_configuration(link,&link->conf))
- !=CS_SUCCESS) {
- fail_fn = RequestConfiguration;
+ fail_rc = pcmcia_request_configuration(link, &link->conf);
+ if (fail_rc != 0) {
dev_printk(KERN_INFO, &handle_to_dev(link),
"pcmcia_request_configuration failed 0x%x\n",
fail_rc);
diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c
index 5eca7a99afe6..5216fce0c62d 100644
--- a/drivers/char/pcmcia/ipwireless/main.c
+++ b/drivers/char/pcmcia/ipwireless/main.c
@@ -65,9 +65,9 @@ static void signalled_reboot_work(struct work_struct *work_reboot)
struct ipw_dev *ipw = container_of(work_reboot, struct ipw_dev,
work_reboot);
struct pcmcia_device *link = ipw->link;
- int ret = pccard_reset_card(link->socket);
+ int ret = pcmcia_reset_card(link->socket);
- if (ret != CS_SUCCESS)
+ if (ret != 0)
cs_error(link, ResetCard, ret);
}
@@ -83,7 +83,6 @@ static int config_ipwireless(struct ipw_dev *ipw)
{
struct pcmcia_device *link = ipw->link;
int ret;
- config_info_t conf;
tuple_t tuple;
unsigned short buf[64];
cisparse_t parse;
@@ -105,7 +104,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
while (ret == 0) {
ret = pcmcia_get_tuple_data(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit0;
}
@@ -116,21 +115,21 @@ static int config_ipwireless(struct ipw_dev *ipw)
ret = pcmcia_get_first_tuple(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetFirstTuple, ret);
goto exit0;
}
ret = pcmcia_get_tuple_data(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit0;
}
- ret = pcmcia_parse_tuple(link, &tuple, &parse);
+ ret = pcmcia_parse_tuple(&tuple, &parse);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, ParseTuple, ret);
goto exit0;
}
@@ -152,21 +151,21 @@ static int config_ipwireless(struct ipw_dev *ipw)
ret = pcmcia_get_first_tuple(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetFirstTuple, ret);
goto exit0;
}
ret = pcmcia_get_tuple_data(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit0;
}
- ret = pcmcia_parse_tuple(link, &tuple, &parse);
+ ret = pcmcia_parse_tuple(&tuple, &parse);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit0;
}
@@ -181,7 +180,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
ret = pcmcia_request_io(link, &link->io);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestIO, ret);
goto exit0;
}
@@ -195,21 +194,21 @@ static int config_ipwireless(struct ipw_dev *ipw)
ret = pcmcia_get_first_tuple(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetFirstTuple, ret);
goto exit1;
}
ret = pcmcia_get_tuple_data(link, &tuple);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, GetTupleData, ret);
goto exit1;
}
- ret = pcmcia_parse_tuple(link, &tuple, &parse);
+ ret = pcmcia_parse_tuple(&tuple, &parse);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, ParseTuple, ret);
goto exit1;
}
@@ -227,7 +226,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
ret = pcmcia_request_window(&link, &ipw->request_common_memory,
&ipw->handle_common_memory);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestWindow, ret);
goto exit1;
}
@@ -239,7 +238,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
ret = pcmcia_map_mem_page(ipw->handle_common_memory,
&memreq_common_memory);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, MapMemPage, ret);
goto exit1;
}
@@ -261,7 +260,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
ret = pcmcia_request_window(&link, &ipw->request_attr_memory,
&ipw->handle_attr_memory);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestWindow, ret);
goto exit2;
}
@@ -272,7 +271,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
ret = pcmcia_map_mem_page(ipw->handle_attr_memory,
&memreq_attr_memory);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, MapMemPage, ret);
goto exit2;
}
@@ -292,20 +291,11 @@ static int config_ipwireless(struct ipw_dev *ipw)
ret = pcmcia_request_irq(link, &link->irq);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestIRQ, ret);
goto exit3;
}
- /* Look up current Vcc */
-
- ret = pcmcia_get_configuration_info(link, &conf);
-
- if (ret != CS_SUCCESS) {
- cs_error(link, GetConfigurationInfo, ret);
- goto exit4;
- }
-
printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
ipw->is_v2_card ? "V2/V3" : "V1");
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
@@ -341,7 +331,7 @@ static int config_ipwireless(struct ipw_dev *ipw)
*/
ret = pcmcia_request_configuration(link, &link->conf);
- if (ret != CS_SUCCESS) {
+ if (ret != 0) {
cs_error(link, RequestConfiguration, ret);
goto exit4;
}
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index c240562c218b..9a626e50b793 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -601,7 +601,7 @@ static int mgslpc_config(struct pcmcia_device *link)
cfg = &(parse.cftable_entry);
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
- CS_CHECK(ParseTuple, pcmcia_parse_tuple(link, &tuple, &parse));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
if (cfg->index == 0)
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index 57029fefd64a..a0f7ffb68087 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -301,7 +301,7 @@ static void scrup(struct vc_data *vc, unsigned int t, unsigned int b, int nr)
d = (unsigned short *)(vc->vc_origin + vc->vc_size_row * t);
s = (unsigned short *)(vc->vc_origin + vc->vc_size_row * (t + nr));
scr_memmovew(d, s, (b - t - nr) * vc->vc_size_row);
- scr_memsetw(d + (b - t - nr) * vc->vc_cols, vc->vc_scrl_erase_char,
+ scr_memsetw(d + (b - t - nr) * vc->vc_cols, vc->vc_video_erase_char,
vc->vc_size_row * nr);
}
@@ -319,7 +319,7 @@ static void scrdown(struct vc_data *vc, unsigned int t, unsigned int b, int nr)
s = (unsigned short *)(vc->vc_origin + vc->vc_size_row * t);
step = vc->vc_cols * nr;
scr_memmovew(s + step, s, (b - t - nr) * vc->vc_size_row);
- scr_memsetw(s, vc->vc_scrl_erase_char, 2 * step);
+ scr_memsetw(s, vc->vc_video_erase_char, 2 * step);
}
static void do_update_region(struct vc_data *vc, unsigned long start, int count)
@@ -434,7 +434,6 @@ static void update_attr(struct vc_data *vc)
vc->vc_blink, vc->vc_underline,
vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic);
vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' ';
- vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, vc->vc_decscnm, false) << 8) | ' ';
}
/* Note: inverting the screen twice should revert to the original state */
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index b50b5dac95b0..6c6dd2facede 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -54,38 +54,6 @@ menuconfig IDE
if IDE
-config BLK_DEV_IDE
- tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support"
- ---help---
- If you say Y here, you will use the full-featured IDE driver to
- control up to ten ATA/IDE interfaces, each being able to serve a
- "master" and a "slave" device, for a total of up to twenty ATA/IDE
- disk/cdrom/tape/floppy drives.
-
- Useful information about large (>540 MB) IDE disks, multiple
- interfaces, what to do if ATA/IDE devices are not automatically
- detected, sound card ATA/IDE ports, module support, and other
- topics, is contained in <file:Documentation/ide/ide.txt>. For detailed
- information about hard drives, consult the Disk-HOWTO and the
- Multi-Disk-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To fine-tune ATA/IDE drive/interface parameters for improved
- performance, look for the hdparm package at
- <ftp://ibiblio.org/pub/Linux/system/hardware/>.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/ide/ide.txt>. The module will be called ide-mod.
- Do not compile this driver as a module if your root file system (the
- one containing the directory /) is located on an IDE device.
-
- If you have one or more IDE drives, say Y or M here. If your system
- has no IDE drives, or if memory requirements are really tight, you
- could say N here, and select the "Old hard disk driver" below
- instead to save about 13 KB of memory in the kernel.
-
-if BLK_DEV_IDE
-
comment "Please see Documentation/ide/ide.txt for help/info on IDE drives"
config IDE_TIMINGS
@@ -348,7 +316,7 @@ config BLK_DEV_IDEPCI
config IDEPCI_PCIBUS_ORDER
bool "Probe IDE PCI devices in the PCI bus order (DEPRECATED)"
- depends on BLK_DEV_IDE=y && BLK_DEV_IDEPCI
+ depends on IDE=y && BLK_DEV_IDEPCI
default y
help
Probe IDE PCI devices in the order in which they appear on the
@@ -729,7 +697,7 @@ endif
config BLK_DEV_IDE_PMAC
tristate "PowerMac on-board IDE support"
- depends on PPC_PMAC && IDE=y && BLK_DEV_IDE=y
+ depends on PPC_PMAC && IDE=y
select IDE_TIMINGS
help
This driver provides support for the on-board IDE controller on
@@ -963,6 +931,4 @@ config BLK_DEV_IDEDMA
def_bool BLK_DEV_IDEDMA_SFF || BLK_DEV_IDEDMA_PMAC || \
BLK_DEV_IDEDMA_ICS || BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-endif
-
endif # IDE
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index 308b8a12f314..ceaf779054ea 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -5,24 +5,25 @@
EXTRA_CFLAGS += -Idrivers/ide
ide-core-y += ide.o ide-ioctls.o ide-io.o ide-iops.o ide-lib.o ide-probe.o \
- ide-taskfile.o ide-pio-blacklist.o
+ ide-taskfile.o ide-park.o ide-pio-blacklist.o
# core IDE code
ide-core-$(CONFIG_IDE_TIMINGS) += ide-timings.o
ide-core-$(CONFIG_IDE_ATAPI) += ide-atapi.o
ide-core-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
+ide-core-$(CONFIG_BLK_DEV_IDEDMA_SFF) += ide-dma-sff.o
ide-core-$(CONFIG_IDE_PROC_FS) += ide-proc.o
ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o
-obj-$(CONFIG_BLK_DEV_IDE) += ide-core.o
+obj-$(CONFIG_IDE) += ide-core.o
ifeq ($(CONFIG_IDE_ARM), y)
ide-arm-core-y += arm/ide_arm.o
obj-y += ide-arm-core.o
endif
-obj-$(CONFIG_BLK_DEV_IDE) += legacy/ pci/
+obj-$(CONFIG_IDE) += legacy/ pci/
obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o
@@ -31,15 +32,21 @@ ifeq ($(CONFIG_BLK_DEV_CMD640), y)
obj-y += cmd640-core.o
endif
-obj-$(CONFIG_BLK_DEV_IDE) += ppc/
+obj-$(CONFIG_IDE) += ppc/
obj-$(CONFIG_IDE_H8300) += h8300/
obj-$(CONFIG_IDE_GENERIC) += ide-generic.o
obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
+ide-disk_mod-y += ide-disk.o ide-disk_ioctl.o
ide-cd_mod-y += ide-cd.o ide-cd_ioctl.o ide-cd_verbose.o
ide-floppy_mod-y += ide-floppy.o ide-floppy_ioctl.o
-obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk.o
+ifeq ($(CONFIG_IDE_PROC_FS), y)
+ ide-disk_mod-y += ide-disk_proc.o
+ ide-floppy_mod-y += ide-floppy_proc.o
+endif
+
+obj-$(CONFIG_BLK_DEV_IDEDISK) += ide-disk_mod.o
obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o
obj-$(CONFIG_BLK_DEV_IDEFLOPPY) += ide-floppy_mod.o
obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o
@@ -54,4 +61,4 @@ ifeq ($(CONFIG_BLK_DEV_PLATFORM), y)
obj-y += ide-platform-core.o
endif
-obj-$(CONFIG_BLK_DEV_IDE) += arm/ mips/
+obj-$(CONFIG_IDE) += arm/ mips/
diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c
index 70f5b164828b..76bdc9a27f6f 100644
--- a/drivers/ide/arm/icside.c
+++ b/drivers/ide/arm/icside.c
@@ -372,25 +372,6 @@ static int icside_dma_test_irq(ide_drive_t *drive)
ICS_ARCIN_V6_INTRSTAT_1)) & 1;
}
-static void icside_dma_timeout(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
-
- if (icside_dma_test_irq(drive))
- return;
-
- ide_dump_status(drive, "DMA timeout", hwif->tp_ops->read_status(hwif));
-
- icside_dma_end(drive);
-}
-
-static void icside_dma_lost_irq(ide_drive_t *drive)
-{
- printk(KERN_ERR "%s: IRQ lost\n", drive->name);
-}
-
static int icside_dma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
{
hwif->dmatable_cpu = NULL;
@@ -406,8 +387,8 @@ static const struct ide_dma_ops icside_v6_dma_ops = {
.dma_start = icside_dma_start,
.dma_end = icside_dma_end,
.dma_test_irq = icside_dma_test_irq,
- .dma_timeout = icside_dma_timeout,
- .dma_lost_irq = icside_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
+ .dma_lost_irq = ide_dma_lost_irq,
};
#else
#define icside_v6_dma_ops NULL
diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/h8300/ide-h8300.c
index bde7a585f198..e2cdd2e9cdec 100644
--- a/drivers/ide/h8300/ide-h8300.c
+++ b/drivers/ide/h8300/ide-h8300.c
@@ -80,7 +80,7 @@ static void h8300_tf_load(ide_drive_t *drive, ide_task_t *task)
outb(tf->lbah, io_ports->lbah_addr);
if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- outb((tf->device & HIHI) | drive->select.all,
+ outb((tf->device & HIHI) | drive->select,
io_ports->device_addr);
}
diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c
index 2427c380b3dc..244a8a052ce8 100644
--- a/drivers/ide/ide-acpi.c
+++ b/drivers/ide/ide-acpi.c
@@ -290,7 +290,7 @@ static int do_drive_get_GTF(ide_drive_t *drive,
DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
hwif->name, dev->bus_id, port, hwif->channel);
- if (!drive->present) {
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0) {
DEBPRINT("%s drive %d:%d not present\n",
hwif->name, hwif->channel, port);
goto out;
@@ -420,8 +420,9 @@ static int do_drive_set_taskfiles(ide_drive_t *drive,
DEBPRINT("ENTER: %s, hard_port#: %d\n", drive->name, drive->dn);
- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
goto out;
+
if (!gtf_count) /* shouldn't be here */
goto out;
@@ -660,7 +661,8 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
if (!drive->acpidata->obj_handle)
drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);
- if (drive->acpidata->obj_handle && drive->present) {
+ if (drive->acpidata->obj_handle &&
+ (drive->dev_flags & IDE_DFLAG_PRESENT)) {
acpi_bus_set_power(drive->acpidata->obj_handle,
on? ACPI_STATE_D0: ACPI_STATE_D3);
}
@@ -720,7 +722,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif)
memset(drive->acpidata, 0, sizeof(*drive->acpidata));
- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
continue;
err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff);
@@ -745,7 +747,7 @@ void ide_acpi_port_init_devices(ide_hwif_t *hwif)
for (i = 0; i < MAX_DRIVES; i++) {
drive = &hwif->drives[i];
- if (drive->present)
+ if (drive->dev_flags & IDE_DFLAG_PRESENT)
/* Execute ACPI startup code */
ide_acpi_exec_tfs(drive);
}
diff --git a/drivers/ide/ide-atapi.c b/drivers/ide/ide-atapi.c
index 608c5bade929..2e305714c209 100644
--- a/drivers/ide/ide-atapi.c
+++ b/drivers/ide/ide-atapi.c
@@ -124,8 +124,8 @@ EXPORT_SYMBOL_GPL(ide_init_pc);
* the current request, so that it will be processed immediately, on the next
* pass through the driver.
*/
-void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
- struct ide_atapi_pc *pc, struct request *rq)
+static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
+ struct ide_atapi_pc *pc, struct request *rq)
{
blk_rq_init(NULL, rq);
rq->cmd_type = REQ_TYPE_SPECIAL;
@@ -137,7 +137,6 @@ void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
rq->cmd[13] = REQ_IDETAPE_PC1;
ide_do_drive_cmd(drive, rq);
}
-EXPORT_SYMBOL_GPL(ide_queue_pc_head);
/*
* Add a special packet command request to the tail of the request queue,
@@ -203,25 +202,80 @@ int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
}
EXPORT_SYMBOL_GPL(ide_set_media_lock);
-/* TODO: unify the code thus making some arguments go away */
-ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
- ide_handler_t *handler, unsigned int timeout, ide_expiry_t *expiry,
- void (*update_buffers)(ide_drive_t *, struct ide_atapi_pc *),
- void (*retry_pc)(ide_drive_t *), void (*dsc_handle)(ide_drive_t *),
- int (*io_buffers)(ide_drive_t *, struct ide_atapi_pc *, unsigned, int))
+void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
+ ide_init_pc(pc);
+ pc->c[0] = REQUEST_SENSE;
+ if (drive->media == ide_floppy) {
+ pc->c[4] = 255;
+ pc->req_xfer = 18;
+ } else {
+ pc->c[4] = 20;
+ pc->req_xfer = 20;
+ }
+}
+EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd);
+
+/*
+ * Called when an error was detected during the last packet command.
+ * We queue a request sense packet command in the head of the request list.
+ */
+void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk)
+{
+ struct request *rq = &drive->request_sense_rq;
+ struct ide_atapi_pc *pc = &drive->request_sense_pc;
+
+ (void)ide_read_error(drive);
+ ide_create_request_sense_cmd(drive, pc);
+ if (drive->media == ide_tape)
+ set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
+ ide_queue_pc_head(drive, disk, pc, rq);
+}
+EXPORT_SYMBOL_GPL(ide_retry_pc);
+
+int ide_scsi_expiry(ide_drive_t *drive)
+{
+ struct ide_atapi_pc *pc = drive->pc;
+
+ debug_log("%s called for %lu at %lu\n", __func__,
+ pc->scsi_cmd->serial_number, jiffies);
+
+ pc->flags |= PC_FLAG_TIMEDOUT;
+
+ return 0; /* we do not want the IDE subsystem to retry */
+}
+EXPORT_SYMBOL_GPL(ide_scsi_expiry);
+
+/*
+ * This is the usual interrupt handler which will be called during a packet
+ * command. We will transfer some of the data (as requested by the drive)
+ * and will re-point interrupt handler to us.
+ */
+static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
+{
+ struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
xfer_func_t *xferfunc;
- unsigned int temp;
+ ide_expiry_t *expiry;
+ unsigned int timeout, temp;
u16 bcount;
- u8 stat, ireason, scsi = drive->scsi;
+ u8 stat, ireason, scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI), dsc = 0;
debug_log("Enter %s - interrupt handler\n", __func__);
+ if (scsi) {
+ timeout = ide_scsi_get_timeout(pc);
+ expiry = ide_scsi_expiry;
+ } else {
+ timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+ : WAIT_TAPE_CMD;
+ expiry = NULL;
+ }
+
if (pc->flags & PC_FLAG_TIMEDOUT) {
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
@@ -238,8 +292,8 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
pc->flags |= PC_FLAG_DMA_ERROR;
} else {
pc->xferred = pc->req_xfer;
- if (update_buffers)
- update_buffers(drive, pc);
+ if (drive->pc_update_buffers)
+ drive->pc_update_buffers(drive, pc);
}
debug_log("%s: DMA finished\n", drive->name);
}
@@ -276,21 +330,19 @@ ide_startstop_t ide_pc_intr(ide_drive_t *drive, struct ide_atapi_pc *pc,
debug_log("[cmd %x]: check condition\n", rq->cmd[0]);
/* Retry operation */
- retry_pc(drive);
+ ide_retry_pc(drive, rq->rq_disk);
/* queued, but not started */
return ide_stopped;
}
cmd_finished:
pc->error = 0;
- if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) &&
- (stat & ATA_DSC) == 0) {
- dsc_handle(drive);
- return ide_stopped;
- }
+
+ if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
+ dsc = 1;
/* Command finished - Call the callback function */
- drive->pc_callback(drive);
+ drive->pc_callback(drive, dsc);
return ide_stopped;
}
@@ -336,7 +388,8 @@ cmd_finished:
temp = 0;
if (temp) {
if (pc->sg)
- io_buffers(drive, pc, temp, 0);
+ drive->pc_io_buffers(drive, pc,
+ temp, 0);
else
tp_ops->input_data(drive, NULL,
pc->cur_pos, temp);
@@ -348,9 +401,7 @@ cmd_finished:
pc->xferred += temp;
pc->cur_pos += temp;
ide_pad_transfer(drive, 0, bcount - temp);
- ide_set_handler(drive, handler, timeout,
- expiry);
- return ide_started;
+ goto next_irq;
}
debug_log("The device wants to send us more data than "
"expected - allowing transfer\n");
@@ -362,7 +413,7 @@ cmd_finished:
if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
(drive->media == ide_tape && !scsi && pc->bh) ||
(scsi && pc->sg)) {
- int done = io_buffers(drive, pc, bcount,
+ int done = drive->pc_io_buffers(drive, pc, bcount,
!!(pc->flags & PC_FLAG_WRITING));
/* FIXME: don't do partial completions */
@@ -377,12 +428,11 @@ cmd_finished:
debug_log("[cmd %x] transferred %d bytes on that intr.\n",
rq->cmd[0], bcount);
-
+next_irq:
/* And set the interrupt handler again */
- ide_set_handler(drive, handler, timeout, expiry);
+ ide_set_handler(drive, ide_pc_intr, timeout, expiry);
return ide_started;
}
-EXPORT_SYMBOL_GPL(ide_pc_intr);
static u8 ide_read_ireason(ide_drive_t *drive)
{
@@ -418,12 +468,22 @@ static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
return ireason;
}
-ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
- ide_handler_t *handler, unsigned int timeout,
- ide_expiry_t *expiry)
+static int ide_delayed_transfer_pc(ide_drive_t *drive)
{
+ /* Send the actual packet */
+ drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);
+
+ /* Timeout for the packet command */
+ return WAIT_FLOPPY_CMD;
+}
+
+static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
+{
+ struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->hwgroup->rq;
+ ide_expiry_t *expiry;
+ unsigned int timeout;
ide_startstop_t startstop;
u8 ireason;
@@ -434,7 +494,8 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
}
ireason = ide_read_ireason(drive);
- if (drive->media == ide_tape && !drive->scsi)
+ if (drive->media == ide_tape &&
+ (drive->dev_flags & IDE_DFLAG_SCSI) == 0)
ireason = ide_wait_ireason(drive, ireason);
if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
@@ -443,8 +504,27 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
return ide_do_reset(drive);
}
+ /*
+ * If necessary schedule the packet transfer to occur 'timeout'
+ * miliseconds later in ide_delayed_transfer_pc() after the device
+ * says it's ready for a packet.
+ */
+ if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
+ timeout = drive->pc_delay;
+ expiry = &ide_delayed_transfer_pc;
+ } else {
+ if (drive->dev_flags & IDE_DFLAG_SCSI) {
+ timeout = ide_scsi_get_timeout(pc);
+ expiry = ide_scsi_expiry;
+ } else {
+ timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
+ : WAIT_TAPE_CMD;
+ expiry = NULL;
+ }
+ }
+
/* Set the interrupt routine */
- ide_set_handler(drive, handler, timeout, expiry);
+ ide_set_handler(drive, ide_pc_intr, timeout, expiry);
/* Begin DMA, if necessary */
if (pc->flags & PC_FLAG_DMA_OK) {
@@ -458,22 +538,22 @@ ide_startstop_t ide_transfer_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
return ide_started;
}
-EXPORT_SYMBOL_GPL(ide_transfer_pc);
-ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
- ide_handler_t *handler, unsigned int timeout,
+ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
ide_expiry_t *expiry)
{
+ struct ide_atapi_pc *pc = drive->pc;
ide_hwif_t *hwif = drive->hwif;
+ u32 tf_flags;
u16 bcount;
- u8 dma = 0;
+ u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);
/* We haven't transferred any data yet */
pc->xferred = 0;
pc->cur_pos = pc->buf;
/* Request to transfer the entire buffer at once */
- if (drive->media == ide_tape && !drive->scsi)
+ if (drive->media == ide_tape && scsi == 0)
bcount = pc->req_xfer;
else
bcount = min(pc->req_xfer, 63 * 1024);
@@ -483,28 +563,35 @@ ide_startstop_t ide_issue_pc(ide_drive_t *drive, struct ide_atapi_pc *pc,
ide_dma_off(drive);
}
- if ((pc->flags & PC_FLAG_DMA_OK) && drive->using_dma) {
- if (drive->scsi)
+ if ((pc->flags & PC_FLAG_DMA_OK) &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
+ if (scsi)
hwif->sg_mapped = 1;
- dma = !hwif->dma_ops->dma_setup(drive);
- if (drive->scsi)
+ drive->dma = !hwif->dma_ops->dma_setup(drive);
+ if (scsi)
hwif->sg_mapped = 0;
}
- if (!dma)
+ if (!drive->dma)
pc->flags &= ~PC_FLAG_DMA_OK;
- ide_pktcmd_tf_load(drive, drive->scsi ? 0 : IDE_TFLAG_OUT_DEVICE,
- bcount, dma);
+ if (scsi)
+ tf_flags = 0;
+ else if (drive->media == ide_cdrom || drive->media == ide_optical)
+ tf_flags = IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL;
+ else
+ tf_flags = IDE_TFLAG_OUT_DEVICE;
+
+ ide_pktcmd_tf_load(drive, tf_flags, bcount, drive->dma);
/* Issue the packet command */
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
- ide_execute_command(drive, ATA_CMD_PACKET, handler,
+ ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
timeout, NULL);
return ide_started;
} else {
ide_execute_pkt_cmd(drive);
- return (*handler)(drive);
+ return ide_transfer_pc(drive);
}
}
EXPORT_SYMBOL_GPL(ide_issue_pc);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 465a92ca0179..3308b1cd3a33 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -23,6 +23,9 @@
* Documentation/ide/ChangeLog.ide-cd.1994-2004
*/
+#define DRV_NAME "ide-cd"
+#define PFX DRV_NAME ": "
+
#define IDECD_VERSION "5.00"
#include <linux/module.h>
@@ -50,12 +53,15 @@
#include "ide-cd.h"
-static DEFINE_MUTEX(idecd_ref_mutex);
+#define IDECD_DEBUG_LOG 1
-#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref)
+#if IDECD_DEBUG_LOG
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
+#else
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
+#endif
-#define ide_cd_g(disk) \
- container_of((disk)->private_data, struct cdrom_info, driver)
+static DEFINE_MUTEX(idecd_ref_mutex);
static void ide_cd_release(struct kref *);
@@ -64,7 +70,7 @@ static struct cdrom_info *ide_cd_get(struct gendisk *disk)
struct cdrom_info *cd = NULL;
mutex_lock(&idecd_ref_mutex);
- cd = ide_cd_g(disk);
+ cd = ide_drv_g(disk, cdrom_info);
if (cd) {
if (ide_device_get(cd->drive))
cd = NULL;
@@ -102,6 +108,9 @@ static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
{
int log = 0;
+ ide_debug_log(IDE_DBG_SENSE, "Call %s, sense_key: 0x%x\n", __func__,
+ sense->sense_key);
+
if (!sense || !rq || (rq->cmd_flags & REQ_QUIET))
return 0;
@@ -150,6 +159,14 @@ static void cdrom_analyze_sense_data(ide_drive_t *drive,
unsigned long bio_sectors;
struct cdrom_info *info = drive->driver_data;
+ ide_debug_log(IDE_DBG_SENSE, "Call %s, error_code: 0x%x, "
+ "sense_key: 0x%x\n", __func__, sense->error_code,
+ sense->sense_key);
+
+ if (failed_command)
+ ide_debug_log(IDE_DBG_SENSE, "%s: failed cmd: 0x%x\n",
+ __func__, failed_command->cmd[0]);
+
if (!cdrom_log_sense(drive, failed_command, sense))
return;
@@ -200,6 +217,8 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
struct cdrom_info *info = drive->driver_data;
struct request *rq = &info->request_sense_request;
+ ide_debug_log(IDE_DBG_SENSE, "Call %s\n", __func__);
+
if (sense == NULL)
sense = &info->sense_data;
@@ -219,6 +238,10 @@ static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
/* NOTE! Save the failed command in "rq->buffer" */
rq->buffer = (void *) failed_command;
+ if (failed_command)
+ ide_debug_log(IDE_DBG_SENSE, "failed_cmd: 0x%x\n",
+ failed_command->cmd[0]);
+
ide_do_drive_cmd(drive, rq);
}
@@ -227,6 +250,10 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate)
struct request *rq = HWGROUP(drive)->rq;
int nsectors = rq->hard_cur_sectors;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s, cmd: 0x%x, uptodate: 0x%x, "
+ "nsectors: %d\n", __func__, rq->cmd[0], uptodate,
+ nsectors);
+
if (blk_sense_request(rq) && uptodate) {
/*
* For REQ_TYPE_SENSE, "rq->buffer" points to the original
@@ -269,6 +296,9 @@ static void cdrom_end_request(ide_drive_t *drive, int uptodate)
if (!nsectors)
nsectors = 1;
+ ide_debug_log(IDE_DBG_FUNC, "Exit %s, uptodate: 0x%x, nsectors: %d\n",
+ __func__, uptodate, nsectors);
+
ide_end_request(drive, uptodate, nsectors);
}
@@ -304,11 +334,15 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
sense_key = err >> 4;
if (rq == NULL) {
- printk(KERN_ERR "%s: missing rq in %s\n",
+ printk(KERN_ERR PFX "%s: missing rq in %s\n",
drive->name, __func__);
return 1;
}
+ ide_debug_log(IDE_DBG_RQ, "%s: stat: 0x%x, good_stat: 0x%x, "
+ "rq->cmd_type: 0x%x, err: 0x%x\n", __func__, stat,
+ good_stat, rq->cmd_type, err);
+
if (blk_sense_request(rq)) {
/*
* We got an error trying to get sense info from the drive
@@ -374,7 +408,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
cdrom_saw_media_change(drive);
/* fail the request */
- printk(KERN_ERR "%s: tray open\n", drive->name);
+ printk(KERN_ERR PFX "%s: tray open\n",
+ drive->name);
do_end_request = 1;
} else {
struct cdrom_info *info = drive->driver_data;
@@ -460,7 +495,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
if (stat & ATA_ERR)
cdrom_queue_request_sense(drive, NULL, NULL);
} else {
- blk_dump_rq_flags(rq, "ide-cd: bad rq");
+ blk_dump_rq_flags(rq, PFX "bad rq");
cdrom_end_request(drive, 0);
}
@@ -488,6 +523,9 @@ static int cdrom_timer_expiry(ide_drive_t *drive)
struct request *rq = HWGROUP(drive)->rq;
unsigned long wait = 0;
+ ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd[0]: 0x%x\n", __func__,
+ rq->cmd[0]);
+
/*
* Some commands are *slow* and normally take a long time to complete.
* Usually we can use the ATAPI "disconnect" to bypass this, but not all
@@ -504,7 +542,7 @@ static int cdrom_timer_expiry(ide_drive_t *drive)
break;
default:
if (!(rq->cmd_flags & REQ_QUIET))
- printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n",
+ printk(KERN_INFO PFX "cmd 0x%x timed out\n",
rq->cmd[0]);
wait = 0;
break;
@@ -524,20 +562,21 @@ static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
int xferlen,
ide_handler_t *handler)
{
- struct cdrom_info *info = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
+ ide_debug_log(IDE_DBG_PC, "Call %s, xferlen: %d\n", __func__, xferlen);
+
/* FIXME: for Virtual DMA we must check harder */
- if (info->dma)
- info->dma = !hwif->dma_ops->dma_setup(drive);
+ if (drive->dma)
+ drive->dma = !hwif->dma_ops->dma_setup(drive);
/* set up the controller registers */
ide_pktcmd_tf_load(drive, IDE_TFLAG_OUT_NSECT | IDE_TFLAG_OUT_LBAL,
- xferlen, info->dma);
+ xferlen, drive->dma);
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
/* waiting for CDB interrupt, not DMA yet. */
- if (info->dma)
+ if (drive->dma)
drive->waiting_for_dma = 0;
/* packet command */
@@ -564,9 +603,10 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
{
ide_hwif_t *hwif = drive->hwif;
int cmd_len;
- struct cdrom_info *info = drive->driver_data;
ide_startstop_t startstop;
+ ide_debug_log(IDE_DBG_PC, "Call %s\n", __func__);
+
if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
/*
* Here we should have been called after receiving an interrupt
@@ -578,7 +618,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
return ide_stopped;
/* ok, next interrupt will be DMA interrupt */
- if (info->dma)
+ if (drive->dma)
drive->waiting_for_dma = 1;
} else {
/* otherwise, we must wait for DRQ to get set */
@@ -599,7 +639,7 @@ static ide_startstop_t cdrom_transfer_packet_command(ide_drive_t *drive,
hwif->tp_ops->output_data(drive, NULL, rq->cmd, cmd_len);
/* start the DMA if need be */
- if (info->dma)
+ if (drive->dma)
hwif->dma_ops->dma_start(drive);
return ide_started;
@@ -615,6 +655,9 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
{
ide_hwif_t *hwif = drive->hwif;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s, ireason: 0x%x, rw: 0x%x\n",
+ __func__, ireason, rw);
+
/*
* ireason == 0: the drive wants to receive data from us
* ireason == 2: the drive is expecting to transfer data to us
@@ -624,7 +667,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
else if (ireason == (rw << 1)) {
/* whoops... */
- printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
+ printk(KERN_ERR PFX "%s: %s: wrong transfer direction!\n",
drive->name, __func__);
ide_pad_transfer(drive, rw, len);
@@ -637,7 +680,7 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
return 0;
} else {
/* drive wants a command packet, or invalid ireason... */
- printk(KERN_ERR "%s: %s: bad interrupt reason 0x%02x\n",
+ printk(KERN_ERR PFX "%s: %s: bad interrupt reason 0x%02x\n",
drive->name, __func__, ireason);
}
@@ -654,17 +697,19 @@ static int ide_cd_check_ireason(ide_drive_t *drive, struct request *rq,
*/
static int ide_cd_check_transfer_size(ide_drive_t *drive, int len)
{
+ ide_debug_log(IDE_DBG_FUNC, "Call %s, len: %d\n", __func__, len);
+
if ((len % SECTOR_SIZE) == 0)
return 0;
- printk(KERN_ERR "%s: %s: Bad transfer size %d\n",
- drive->name, __func__, len);
+ printk(KERN_ERR PFX "%s: %s: Bad transfer size %d\n", drive->name,
+ __func__, len);
if (drive->atapi_flags & IDE_AFLAG_LIMIT_NFRAMES)
- printk(KERN_ERR " This drive is not supported by "
- "this version of the driver\n");
+ printk(KERN_ERR PFX "This drive is not supported by this "
+ "version of the driver\n");
else {
- printk(KERN_ERR " Trying to limit transfer sizes\n");
+ printk(KERN_ERR PFX "Trying to limit transfer sizes\n");
drive->atapi_flags |= IDE_AFLAG_LIMIT_NFRAMES;
}
@@ -676,6 +721,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
struct request *rq)
{
+ ide_debug_log(IDE_DBG_RQ, "Call %s: rq->cmd_flags: 0x%x\n", __func__,
+ rq->cmd_flags);
+
if (rq_data_dir(rq) == READ) {
unsigned short sectors_per_frame =
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
@@ -695,7 +743,7 @@ static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
/* sanity check... */
if (rq->current_nr_sectors !=
bio_cur_sectors(rq->bio)) {
- printk(KERN_ERR "%s: %s: buffer botch (%u)\n",
+ printk(KERN_ERR PFX "%s: %s: buffer botch (%u)\n",
drive->name, __func__,
rq->current_nr_sectors);
cdrom_end_request(drive, 0);
@@ -704,11 +752,7 @@ static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
rq->current_nr_sectors += nskip;
}
}
-#if 0
- else
- /* the immediate bit */
- rq->cmd[1] = 1 << 3;
-#endif
+
/* set up the command */
rq->timeout = ATAPI_WAIT_PC;
@@ -739,6 +783,8 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)
int stat;
static int retry = 10;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if (cdrom_decode_status(drive, 0, &stat))
return ide_stopped;
@@ -746,7 +792,7 @@ static ide_startstop_t cdrom_seek_intr(ide_drive_t *drive)
if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
if (--retry == 0)
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
}
return ide_stopped;
}
@@ -755,6 +801,8 @@ static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq)
{
sector_t frame = rq->sector;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS);
memset(rq->cmd, 0, BLK_MAX_CDB);
@@ -775,8 +823,11 @@ static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive)
* Fix up a possibly partially-processed request so that we can start it over
* entirely, or even put it back on the request queue.
*/
-static void restore_request(struct request *rq)
+static void ide_cd_restore_request(ide_drive_t *drive, struct request *rq)
{
+
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if (rq->buffer != bio_data(rq->bio)) {
sector_t n =
(rq->buffer - (char *)bio_data(rq->bio)) / SECTOR_SIZE;
@@ -795,8 +846,11 @@ static void restore_request(struct request *rq)
/*
* All other packet commands.
*/
-static void ide_cd_request_sense_fixup(struct request *rq)
+static void ide_cd_request_sense_fixup(ide_drive_t *drive, struct request *rq)
{
+
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
/*
* Some of the trailing request sense fields are optional,
* and some drives don't send them. Sigh.
@@ -822,6 +876,10 @@ int ide_cd_queue_pc(ide_drive_t *drive, const unsigned char *cmd,
if (!sense)
sense = &local_sense;
+ ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x, "
+ "timeout: %d, cmd_flags: 0x%x\n", __func__, cmd[0], write,
+ timeout, cmd_flags);
+
/* start of retry loop */
do {
struct request *rq;
@@ -895,7 +953,6 @@ static int cdrom_newpc_intr_dummy_cb(struct request *rq)
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- struct cdrom_info *info = drive->driver_data;
struct request *rq = HWGROUP(drive)->rq;
xfer_func_t *xferfunc;
ide_expiry_t *expiry = NULL;
@@ -905,13 +962,16 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
u16 len;
u8 ireason;
+ ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd[0]: 0x%x, write: 0x%x\n",
+ __func__, rq->cmd[0], write);
+
/* check for errors */
- dma = info->dma;
+ dma = drive->dma;
if (dma) {
- info->dma = 0;
+ drive->dma = 0;
dma_error = hwif->dma_ops->dma_end(drive);
if (dma_error) {
- printk(KERN_ERR "%s: DMA %s error\n", drive->name,
+ printk(KERN_ERR PFX "%s: DMA %s error\n", drive->name,
write ? "write" : "read");
ide_dma_off(drive);
}
@@ -937,6 +997,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
if (thislen > len)
thislen = len;
+ ide_debug_log(IDE_DBG_PC, "%s: DRQ: stat: 0x%x, thislen: %d\n",
+ __func__, stat, thislen);
+
/* If DRQ is clear, the command has completed. */
if ((stat & ATA_DRQ) == 0) {
if (blk_fs_request(rq)) {
@@ -946,7 +1009,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
*/
uptodate = 1;
if (rq->current_nr_sectors > 0) {
- printk(KERN_ERR "%s: %s: data underrun "
+ printk(KERN_ERR PFX "%s: %s: data underrun "
"(%d blocks)\n",
drive->name, __func__,
rq->current_nr_sectors);
@@ -957,7 +1020,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
cdrom_end_request(drive, uptodate);
return ide_stopped;
} else if (!blk_pc_request(rq)) {
- ide_cd_request_sense_fixup(rq);
+ ide_cd_request_sense_fixup(drive, rq);
/* complain if we still have data left to transfer */
uptodate = rq->data_len ? 0 : 1;
}
@@ -1000,6 +1063,9 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
xferfunc = hwif->tp_ops->input_data;
}
+ ide_debug_log(IDE_DBG_PC, "%s: data transfer, rq->cmd_type: 0x%x, "
+ "ireason: 0x%x\n", __func__, rq->cmd_type, ireason);
+
/* transfer data */
while (thislen > 0) {
u8 *ptr = blk_fs_request(rq) ? NULL : rq->data;
@@ -1024,7 +1090,7 @@ static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
*/
ide_pad_transfer(drive, 0, thislen);
else {
- printk(KERN_ERR "%s: confused, missing data\n",
+ printk(KERN_ERR PFX "%s: confused, missing data\n",
drive->name);
blk_dump_rq_flags(rq, rq_data_dir(rq)
? "cdrom_newpc_intr, write"
@@ -1111,6 +1177,9 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
unsigned short sectors_per_frame =
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
+ ide_debug_log(IDE_DBG_RQ, "Call %s, write: 0x%x, secs_per_frame: %u\n",
+ __func__, write, sectors_per_frame);
+
if (write) {
/* disk has become write protected */
if (get_disk_ro(cd->disk)) {
@@ -1122,7 +1191,7 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
* We may be retrying this request after an error. Fix up any
* weirdness which might be present in the request packet.
*/
- restore_request(rq);
+ ide_cd_restore_request(drive, rq);
}
/* use DMA, if possible / writes *must* be hardware frame aligned */
@@ -1132,9 +1201,9 @@ static ide_startstop_t cdrom_start_rw(ide_drive_t *drive, struct request *rq)
cdrom_end_request(drive, 0);
return ide_stopped;
}
- cd->dma = 0;
+ drive->dma = 0;
} else
- cd->dma = drive->using_dma;
+ drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
if (write)
cd->devinfo.media_written = 1;
@@ -1151,14 +1220,16 @@ static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
{
- struct cdrom_info *info = drive->driver_data;
+
+ ide_debug_log(IDE_DBG_PC, "Call %s, rq->cmd_type: 0x%x\n", __func__,
+ rq->cmd_type);
if (blk_pc_request(rq))
rq->cmd_flags |= REQ_QUIET;
else
rq->cmd_flags &= ~REQ_FAILED;
- info->dma = 0;
+ drive->dma = 0;
/* sg request */
if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) {
@@ -1171,7 +1242,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
else
buf = rq->data;
- info->dma = drive->using_dma;
+ drive->dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
/*
* check if dma is safe
@@ -1182,7 +1253,7 @@ static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
alignment = queue_dma_alignment(q) | q->dma_pad_mask;
if ((unsigned long)buf & alignment || rq->data_len & alignment
|| object_is_on_stack(buf))
- info->dma = 0;
+ drive->dma = 0;
}
}
@@ -1196,6 +1267,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
ide_handler_t *fn;
int xferlen;
+ ide_debug_log(IDE_DBG_RQ, "Call %s, rq->cmd_type: 0x%x, block: %llu\n",
+ __func__, rq->cmd_type, (unsigned long long)block);
+
if (blk_fs_request(rq)) {
if (drive->atapi_flags & IDE_AFLAG_SEEKING) {
ide_hwif_t *hwif = drive->hwif;
@@ -1208,7 +1282,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
IDECD_SEEK_TIMER);
return ide_stopped;
}
- printk(KERN_ERR "%s: DSC timeout\n",
+ printk(KERN_ERR PFX "%s: DSC timeout\n",
drive->name);
}
drive->atapi_flags &= ~IDE_AFLAG_SEEKING;
@@ -1216,11 +1290,11 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
if (rq_data_dir(rq) == READ &&
IDE_LARGE_SEEK(info->last_block, block,
IDECD_SEEK_THRESHOLD) &&
- drive->dsc_overlap) {
+ (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP)) {
xferlen = 0;
fn = cdrom_start_seek_continuation;
- info->dma = 0;
+ drive->dma = 0;
info->start_seek = jiffies;
ide_cd_prepare_seek_request(drive, rq);
@@ -1249,7 +1323,7 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
cdrom_end_request(drive, 1);
return ide_stopped;
} else {
- blk_dump_rq_flags(rq, "ide-cd bad flags");
+ blk_dump_rq_flags(rq, DRV_NAME " bad flags");
cdrom_end_request(drive, 0);
return ide_stopped;
}
@@ -1279,6 +1353,8 @@ int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
struct cdrom_device_info *cdi = &info->devinfo;
unsigned char cmd[BLK_MAX_CDB];
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
memset(cmd, 0, BLK_MAX_CDB);
cmd[0] = GPCMD_TEST_UNIT_READY;
@@ -1305,6 +1381,8 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
unsigned len = sizeof(capbuf);
u32 blocklen;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
memset(cmd, 0, BLK_MAX_CDB);
cmd[0] = GPCMD_READ_CDVD_CAPACITY;
@@ -1324,10 +1402,10 @@ static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
case 4096:
break;
default:
- printk(KERN_ERR "%s: weird block size %u\n",
- drive->name, blocklen);
- printk(KERN_ERR "%s: default to 2kb block size\n",
- drive->name);
+ printk(KERN_ERR PFX "%s: weird block size %u\n",
+ drive->name, blocklen);
+ printk(KERN_ERR PFX "%s: default to 2kb block size\n",
+ drive->name);
blocklen = 2048;
break;
}
@@ -1343,6 +1421,8 @@ static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
{
unsigned char cmd[BLK_MAX_CDB];
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
memset(cmd, 0, BLK_MAX_CDB);
cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
@@ -1371,11 +1451,13 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
long last_written;
unsigned long sectors_per_frame = SECTORS_PER_FRAME;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if (toc == NULL) {
/* try to allocate space */
toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
if (toc == NULL) {
- printk(KERN_ERR "%s: No cdrom TOC buffer!\n",
+ printk(KERN_ERR PFX "%s: No cdrom TOC buffer!\n",
drive->name);
return -ENOMEM;
}
@@ -1531,6 +1613,8 @@ int ide_cdrom_get_capabilities(ide_drive_t *drive, u8 *buf)
struct packet_command cgc;
int stat, attempts = 3, size = ATAPI_CAPABILITIES_PAGE_SIZE;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if ((drive->atapi_flags & IDE_AFLAG_FULL_CAPS_PAGE) == 0)
size -= ATAPI_CAPABILITIES_PAGE_PAD_SIZE;
@@ -1549,6 +1633,8 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf)
struct cdrom_info *cd = drive->driver_data;
u16 curspeed, maxspeed;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
if (drive->atapi_flags & IDE_AFLAG_LE_SPEED_FIELDS) {
curspeed = le16_to_cpup((__le16 *)&buf[8 + 14]);
maxspeed = le16_to_cpup((__le16 *)&buf[8 + 8]);
@@ -1589,6 +1675,8 @@ static int ide_cdrom_register(ide_drive_t *drive, int nslots)
struct cdrom_info *info = drive->driver_data;
struct cdrom_device_info *devinfo = &info->devinfo;
+ ide_debug_log(IDE_DBG_PROBE, "Call %s, nslots: %d\n", __func__, nslots);
+
devinfo->ops = &ide_cdrom_dops;
devinfo->speed = info->current_speed;
devinfo->capacity = nslots;
@@ -1610,13 +1698,17 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
mechtype_t mechtype;
int nslots = 1;
+ ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->media: 0x%x, "
+ "drive->atapi_flags: 0x%lx\n", __func__, drive->media,
+ drive->atapi_flags);
+
cdi->mask = (CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R |
CDC_DVD_RAM | CDC_SELECT_DISC | CDC_PLAY_AUDIO |
CDC_MO_DRIVE | CDC_RAM);
if (drive->media == ide_optical) {
cdi->mask &= ~(CDC_MO_DRIVE | CDC_RAM);
- printk(KERN_ERR "%s: ATAPI magneto-optical drive\n",
+ printk(KERN_ERR PFX "%s: ATAPI magneto-optical drive\n",
drive->name);
return nslots;
}
@@ -1674,7 +1766,7 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
ide_cdrom_update_speed(drive, buf);
- printk(KERN_INFO "%s: ATAPI", drive->name);
+ printk(KERN_INFO PFX "%s: ATAPI", drive->name);
/* don't print speed if the drive reported 0 */
if (cd->max_speed)
@@ -1697,7 +1789,8 @@ static int ide_cdrom_probe_capabilities(ide_drive_t *drive)
else
printk(KERN_CONT " drive");
- printk(KERN_CONT ", %dkB Cache\n", be16_to_cpup((__be16 *)&buf[8 + 12]));
+ printk(KERN_CONT ", %dkB Cache\n",
+ be16_to_cpup((__be16 *)&buf[8 + 12]));
return nslots;
}
@@ -1809,7 +1902,7 @@ static ide_proc_entry_t idecd_proc[] = {
{ NULL, 0, NULL, NULL }
};
-ide_devset_rw_field(dsc_overlap, dsc_overlap);
+ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);
static const struct ide_proc_devset idecd_settings[] = {
IDE_PROC_DEVSET(dsc_overlap, 0, 1),
@@ -1884,6 +1977,8 @@ static int ide_cdrom_setup(ide_drive_t *drive)
char *fw_rev = (char *)&id[ATA_ID_FW_REV];
int nslots;
+ ide_debug_log(IDE_DBG_PROBE, "Call %s\n", __func__);
+
blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
blk_queue_dma_alignment(drive->queue, 31);
blk_queue_update_dma_pad(drive->queue, 15);
@@ -1891,14 +1986,9 @@ static int ide_cdrom_setup(ide_drive_t *drive)
if (!drive->queue->unplug_delay)
drive->queue->unplug_delay = 1;
- drive->special.all = 0;
-
drive->atapi_flags = IDE_AFLAG_MEDIA_CHANGED | IDE_AFLAG_NO_EJECT |
ide_cd_flags(id);
- if ((id[ATA_ID_CONFIG] & 0x0060) == 0x20)
- drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
-
if ((drive->atapi_flags & IDE_AFLAG_VERTOS_300_SSD) &&
fw_rev[4] == '1' && fw_rev[6] <= '2')
drive->atapi_flags |= (IDE_AFLAG_TOCTRACKS_AS_BCD |
@@ -1915,10 +2005,13 @@ static int ide_cdrom_setup(ide_drive_t *drive)
/* set correct block size */
blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE);
- drive->dsc_overlap = (drive->next != drive);
+ if (drive->next != drive)
+ drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
if (ide_cdrom_register(drive, nslots)) {
- printk(KERN_ERR "%s: %s failed to register device with the"
+ printk(KERN_ERR PFX "%s: %s failed to register device with the"
" cdrom driver.\n", drive->name, __func__);
cd->devinfo.handle = NULL;
return 1;
@@ -1932,6 +2025,8 @@ static void ide_cd_remove(ide_drive_t *drive)
{
struct cdrom_info *info = drive->driver_data;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
ide_proc_unregister_driver(drive, info->driver);
del_gendisk(info->disk);
@@ -1941,15 +2036,17 @@ static void ide_cd_remove(ide_drive_t *drive)
static void ide_cd_release(struct kref *kref)
{
- struct cdrom_info *info = to_ide_cd(kref);
+ struct cdrom_info *info = to_ide_drv(kref, cdrom_info);
struct cdrom_device_info *devinfo = &info->devinfo;
ide_drive_t *drive = info->drive;
struct gendisk *g = info->disk;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
kfree(info->toc);
if (devinfo->handle == drive)
unregister_cdrom(devinfo);
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
drive->driver_data = NULL;
blk_queue_prep_rq(drive->queue, NULL);
g->private_data = NULL;
@@ -1968,7 +2065,6 @@ static ide_driver_t ide_cdrom_driver = {
.probe = ide_cd_probe,
.remove = ide_cd_remove,
.version = IDECD_VERSION,
- .media = ide_cdrom,
.do_request = ide_cd_do_request,
.end_request = ide_end_request,
.error = __ide_error,
@@ -1999,7 +2095,7 @@ static int idecd_open(struct inode *inode, struct file *file)
static int idecd_release(struct inode *inode, struct file *file)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct cdrom_info *info = ide_cd_g(disk);
+ struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
cdrom_release(&info->devinfo, file);
@@ -2051,7 +2147,7 @@ static int idecd_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
- struct cdrom_info *info = ide_cd_g(bdev->bd_disk);
+ struct cdrom_info *info = ide_drv_g(bdev->bd_disk, cdrom_info);
int err;
switch (cmd) {
@@ -2072,13 +2168,13 @@ static int idecd_ioctl(struct inode *inode, struct file *file,
static int idecd_media_changed(struct gendisk *disk)
{
- struct cdrom_info *info = ide_cd_g(disk);
+ struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
return cdrom_media_changed(&info->devinfo);
}
static int idecd_revalidate_disk(struct gendisk *disk)
{
- struct cdrom_info *info = ide_cd_g(disk);
+ struct cdrom_info *info = ide_drv_g(disk, cdrom_info);
struct request_sense sense;
ide_cd_read_toc(info->drive, &sense);
@@ -2097,8 +2193,11 @@ static struct block_device_operations idecd_ops = {
/* module options */
static char *ignore;
-
module_param(ignore, charp, 0400);
+
+static unsigned long debug_mask;
+module_param(debug_mask, ulong, 0644);
+
MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
static int ide_cd_probe(ide_drive_t *drive)
@@ -2107,6 +2206,10 @@ static int ide_cd_probe(ide_drive_t *drive)
struct gendisk *g;
struct request_sense sense;
+ ide_debug_log(IDE_DBG_PROBE, "Call %s, drive->driver_req: %s, "
+ "drive->media: 0x%x\n", __func__, drive->driver_req,
+ drive->media);
+
if (!strstr("ide-cdrom", drive->driver_req))
goto failed;
@@ -2116,14 +2219,17 @@ static int ide_cd_probe(ide_drive_t *drive)
/* skip drives that we were told to ignore */
if (ignore != NULL) {
if (strstr(ignore, drive->name)) {
- printk(KERN_INFO "ide-cd: ignoring drive %s\n",
+ printk(KERN_INFO PFX "ignoring drive %s\n",
drive->name);
goto failed;
}
}
+
+ drive->debug_mask = debug_mask;
+
info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
if (info == NULL) {
- printk(KERN_ERR "%s: Can't allocate a cdrom structure\n",
+ printk(KERN_ERR PFX "%s: Can't allocate a cdrom structure\n",
drive->name);
goto failed;
}
@@ -2171,6 +2277,7 @@ static void __exit ide_cdrom_exit(void)
static int __init ide_cdrom_init(void)
{
+ printk(KERN_INFO DRV_NAME " driver " IDECD_VERSION "\n");
return driver_register(&ide_cdrom_driver.gen_driver);
}
diff --git a/drivers/ide/ide-cd.h b/drivers/ide/ide-cd.h
index 61a4599b77db..5882b9a9ea8b 100644
--- a/drivers/ide/ide-cd.h
+++ b/drivers/ide/ide-cd.h
@@ -88,7 +88,6 @@ struct cdrom_info {
struct request_sense sense_data;
struct request request_sense_request;
- int dma;
unsigned long last_block;
unsigned long start_seek;
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 01846f244b40..3853bde8eedc 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -45,21 +45,12 @@
#define IDE_DISK_MINORS 0
#endif
-struct ide_disk_obj {
- ide_drive_t *drive;
- ide_driver_t *driver;
- struct gendisk *disk;
- struct kref kref;
- unsigned int openers; /* protected by BKL for now */
-};
+#include "ide-disk.h"
static DEFINE_MUTEX(idedisk_ref_mutex);
#define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref)
-#define ide_disk_g(disk) \
- container_of((disk)->private_data, struct ide_disk_obj, driver)
-
static void ide_disk_release(struct kref *);
static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
@@ -140,9 +131,9 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
sector_t block)
{
ide_hwif_t *hwif = HWIF(drive);
- unsigned int dma = drive->using_dma;
u16 nsectors = (u16)rq->nr_sectors;
- u8 lba48 = (drive->addressing == 1) ? 1 : 0;
+ u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
+ u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
ide_task_t task;
struct ide_taskfile *tf = &task.tf;
ide_startstop_t rc;
@@ -162,7 +153,7 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
memset(&task, 0, sizeof(task));
task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- if (drive->select.b.lba) {
+ if (drive->dev_flags & IDE_DFLAG_LBA) {
if (lba48) {
pr_debug("%s: LBA=0x%012llx\n", drive->name,
(unsigned long long)block);
@@ -187,6 +178,8 @@ static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
tf->lbah = block >>= 8;
tf->device = (block >> 8) & 0xf;
}
+
+ tf->device |= ATA_LBA;
} else {
unsigned int sect, head, cyl, track;
@@ -237,7 +230,7 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
{
ide_hwif_t *hwif = HWIF(drive);
- BUG_ON(drive->blocked);
+ BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
if (!blk_fs_request(rq)) {
blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
@@ -384,139 +377,39 @@ static void idedisk_check_hpa(ide_drive_t *drive)
static void init_idedisk_capacity(ide_drive_t *drive)
{
u16 *id = drive->id;
- /*
- * If this drive supports the Host Protected Area feature set,
- * then we may need to change our opinion about the drive's capacity.
- */
- int hpa = ata_id_hpa_enabled(id);
+ int lba;
if (ata_id_lba48_enabled(id)) {
/* drive speaks 48-bit LBA */
- drive->select.b.lba = 1;
+ lba = 1;
drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
- if (hpa)
- idedisk_check_hpa(drive);
} else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
/* drive speaks 28-bit LBA */
- drive->select.b.lba = 1;
+ lba = 1;
drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
- if (hpa)
- idedisk_check_hpa(drive);
} else {
/* drive speaks boring old 28-bit CHS */
+ lba = 0;
drive->capacity64 = drive->cyl * drive->head * drive->sect;
}
-}
-static sector_t idedisk_capacity(ide_drive_t *drive)
-{
- return drive->capacity64;
-}
+ if (lba) {
+ drive->dev_flags |= IDE_DFLAG_LBA;
-#ifdef CONFIG_IDE_PROC_FS
-static int smart_enable(ide_drive_t *drive)
-{
- ide_task_t args;
- struct ide_taskfile *tf = &args.tf;
-
- memset(&args, 0, sizeof(ide_task_t));
- tf->feature = ATA_SMART_ENABLE;
- tf->lbam = ATA_SMART_LBAM_PASS;
- tf->lbah = ATA_SMART_LBAH_PASS;
- tf->command = ATA_CMD_SMART;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- return ide_no_data_taskfile(drive, &args);
-}
-
-static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd)
-{
- ide_task_t args;
- struct ide_taskfile *tf = &args.tf;
-
- memset(&args, 0, sizeof(ide_task_t));
- tf->feature = sub_cmd;
- tf->nsect = 0x01;
- tf->lbam = ATA_SMART_LBAM_PASS;
- tf->lbah = ATA_SMART_LBAH_PASS;
- tf->command = ATA_CMD_SMART;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- args.data_phase = TASKFILE_IN;
- (void) smart_enable(drive);
- return ide_raw_taskfile(drive, &args, buf, 1);
-}
-
-static int proc_idedisk_read_cache
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- ide_drive_t *drive = (ide_drive_t *) data;
- char *out = page;
- int len;
-
- if (drive->id_read)
- len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2);
- else
- len = sprintf(out, "(none)\n");
-
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static int proc_idedisk_read_capacity
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- ide_drive_t*drive = (ide_drive_t *)data;
- int len;
-
- len = sprintf(page, "%llu\n", (long long)idedisk_capacity(drive));
-
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static int proc_idedisk_read_smart(char *page, char **start, off_t off,
- int count, int *eof, void *data, u8 sub_cmd)
-{
- ide_drive_t *drive = (ide_drive_t *)data;
- int len = 0, i = 0;
-
- if (get_smart_data(drive, page, sub_cmd) == 0) {
- unsigned short *val = (unsigned short *) page;
- char *out = (char *)val + SECTOR_SIZE;
-
- page = out;
- do {
- out += sprintf(out, "%04x%c", le16_to_cpu(*val),
- (++i & 7) ? ' ' : '\n');
- val += 1;
- } while (i < SECTOR_SIZE / 2);
- len = out - page;
+ /*
+ * If this device supports the Host Protected Area feature set,
+ * then we may need to change our opinion about its capacity.
+ */
+ if (ata_id_hpa_enabled(id))
+ idedisk_check_hpa(drive);
}
-
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
}
-static int proc_idedisk_read_sv
- (char *page, char **start, off_t off, int count, int *eof, void *data)
+sector_t ide_disk_capacity(ide_drive_t *drive)
{
- return proc_idedisk_read_smart(page, start, off, count, eof, data,
- ATA_SMART_READ_VALUES);
-}
-
-static int proc_idedisk_read_st
- (char *page, char **start, off_t off, int count, int *eof, void *data)
-{
- return proc_idedisk_read_smart(page, start, off, count, eof, data,
- ATA_SMART_READ_THRESHOLDS);
+ return drive->capacity64;
}
-static ide_proc_entry_t idedisk_proc[] = {
- { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
- { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL },
- { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
- { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL },
- { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL },
- { NULL, 0, NULL, NULL }
-};
-#endif /* CONFIG_IDE_PROC_FS */
-
static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
{
ide_drive_t *drive = q->queuedata;
@@ -568,25 +461,43 @@ static int set_multcount(ide_drive_t *drive, int arg)
return (drive->mult_count == arg) ? 0 : -EIO;
}
-ide_devset_get(nowerr, nowerr);
+ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
static int set_nowerr(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 1)
return -EINVAL;
- drive->nowerr = arg;
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_NOWERR;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_NOWERR;
+
drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
+
return 0;
}
+static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
+{
+ ide_task_t task;
+
+ memset(&task, 0, sizeof(task));
+ task.tf.feature = feature;
+ task.tf.nsect = nsect;
+ task.tf.command = ATA_CMD_SET_FEATURES;
+ task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+
+ return ide_no_data_taskfile(drive, &task);
+}
+
static void update_ordered(ide_drive_t *drive)
{
u16 *id = drive->id;
unsigned ordered = QUEUE_ORDERED_NONE;
prepare_flush_fn *prep_fn = NULL;
- if (drive->wcache) {
+ if (drive->dev_flags & IDE_DFLAG_WCACHE) {
unsigned long long capacity;
int barrier;
/*
@@ -597,9 +508,11 @@ static void update_ordered(ide_drive_t *drive)
* time we have trimmed the drive capacity if LBA48 is
* not available so we don't need to recheck that.
*/
- capacity = idedisk_capacity(drive);
- barrier = ata_id_flush_enabled(id) && !drive->noflush &&
- (drive->addressing == 0 || capacity <= (1ULL << 28) ||
+ capacity = ide_disk_capacity(drive);
+ barrier = ata_id_flush_enabled(id) &&
+ (drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
+ ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
+ capacity <= (1ULL << 28) ||
ata_id_flush_ext_enabled(id));
printk(KERN_INFO "%s: cache flushes %ssupported\n",
@@ -615,25 +528,24 @@ static void update_ordered(ide_drive_t *drive)
blk_queue_ordered(drive->queue, ordered, prep_fn);
}
-ide_devset_get(wcache, wcache);
+ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
static int set_wcache(ide_drive_t *drive, int arg)
{
- ide_task_t args;
int err = 1;
if (arg < 0 || arg > 1)
return -EINVAL;
if (ata_id_flush_enabled(drive->id)) {
- memset(&args, 0, sizeof(ide_task_t));
- args.tf.feature = arg ?
- SETFEATURES_WC_ON : SETFEATURES_WC_OFF;
- args.tf.command = ATA_CMD_SET_FEATURES;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- err = ide_no_data_taskfile(drive, &args);
- if (err == 0)
- drive->wcache = arg;
+ err = ide_do_setfeature(drive,
+ arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
+ if (err == 0) {
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_WCACHE;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_WCACHE;
+ }
}
update_ordered(drive);
@@ -658,22 +570,18 @@ ide_devset_get(acoustic, acoustic);
static int set_acoustic(ide_drive_t *drive, int arg)
{
- ide_task_t args;
-
if (arg < 0 || arg > 254)
return -EINVAL;
- memset(&args, 0, sizeof(ide_task_t));
- args.tf.feature = arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF;
- args.tf.nsect = arg;
- args.tf.command = ATA_CMD_SET_FEATURES;
- args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- ide_no_data_taskfile(drive, &args);
+ ide_do_setfeature(drive,
+ arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
+
drive->acoustic = arg;
+
return 0;
}
-ide_devset_get(addressing, addressing);
+ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
/*
* drive->addressing:
@@ -686,49 +594,27 @@ static int set_addressing(ide_drive_t *drive, int arg)
if (arg < 0 || arg > 2)
return -EINVAL;
- drive->addressing = 0;
-
- if (drive->hwif->host_flags & IDE_HFLAG_NO_LBA48)
- return 0;
-
- if (ata_id_lba48_enabled(drive->id) == 0)
+ if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
+ ata_id_lba48_enabled(drive->id) == 0))
return -EIO;
- drive->addressing = arg;
+ if (arg == 2)
+ arg = 0;
+
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_LBA48;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_LBA48;
return 0;
}
-ide_devset_rw(acoustic, acoustic);
-ide_devset_rw(address, addressing);
-ide_devset_rw(multcount, multcount);
-ide_devset_rw(wcache, wcache);
-
-ide_devset_rw_sync(nowerr, nowerr);
+ide_ext_devset_rw(acoustic, acoustic);
+ide_ext_devset_rw(address, addressing);
+ide_ext_devset_rw(multcount, multcount);
+ide_ext_devset_rw(wcache, wcache);
-#ifdef CONFIG_IDE_PROC_FS
-ide_devset_rw_field(bios_cyl, bios_cyl);
-ide_devset_rw_field(bios_head, bios_head);
-ide_devset_rw_field(bios_sect, bios_sect);
-ide_devset_rw_field(failures, failures);
-ide_devset_rw_field(lun, lun);
-ide_devset_rw_field(max_failures, max_failures);
-
-static const struct ide_proc_devset idedisk_settings[] = {
- IDE_PROC_DEVSET(acoustic, 0, 254),
- IDE_PROC_DEVSET(address, 0, 2),
- IDE_PROC_DEVSET(bios_cyl, 0, 65535),
- IDE_PROC_DEVSET(bios_head, 0, 255),
- IDE_PROC_DEVSET(bios_sect, 0, 63),
- IDE_PROC_DEVSET(failures, 0, 65535),
- IDE_PROC_DEVSET(lun, 0, 7),
- IDE_PROC_DEVSET(max_failures, 0, 65535),
- IDE_PROC_DEVSET(multcount, 0, 16),
- IDE_PROC_DEVSET(nowerr, 0, 1),
- IDE_PROC_DEVSET(wcache, 0, 1),
- { 0 },
-};
-#endif
+ide_ext_devset_rw_sync(nowerr, nowerr);
static void idedisk_setup(ide_drive_t *drive)
{
@@ -740,20 +626,20 @@ static void idedisk_setup(ide_drive_t *drive)
ide_proc_register_driver(drive, idkp->driver);
- if (drive->id_read == 0)
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
return;
- if (drive->removable) {
+ if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
/*
* Removable disks (eg. SYQUEST); ignore 'WD' drives
*/
if (m[0] != 'W' || m[1] != 'D')
- drive->doorlocking = 1;
+ drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
}
(void)set_addressing(drive, 1);
- if (drive->addressing == 1) {
+ if (drive->dev_flags & IDE_DFLAG_LBA48) {
int max_s = 2048;
if (max_s > hwif->rqsize)
@@ -769,7 +655,8 @@ static void idedisk_setup(ide_drive_t *drive)
init_idedisk_capacity(drive);
/* limit drive capacity to 137GB if LBA48 cannot be used */
- if (drive->addressing == 0 && drive->capacity64 > 1ULL << 28) {
+ if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
+ drive->capacity64 > 1ULL << 28) {
printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
"%llu sectors (%llu MB)\n",
drive->name, (unsigned long long)drive->capacity64,
@@ -777,22 +664,23 @@ static void idedisk_setup(ide_drive_t *drive)
drive->capacity64 = 1ULL << 28;
}
- if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && drive->addressing) {
+ if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
+ (drive->dev_flags & IDE_DFLAG_LBA48)) {
if (drive->capacity64 > 1ULL << 28) {
printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
" will be used for accessing sectors "
"> %u\n", drive->name, 1 << 28);
} else
- drive->addressing = 0;
+ drive->dev_flags &= ~IDE_DFLAG_LBA48;
}
/*
* if possible, give fdisk access to more of the drive,
* by correcting bios_cyls:
*/
- capacity = idedisk_capacity(drive);
+ capacity = ide_disk_capacity(drive);
- if (!drive->forced_geom) {
+ if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
if (ata_id_lba48_enabled(drive->id)) {
/* compatibility */
drive->bios_sect = 63;
@@ -827,14 +715,15 @@ static void idedisk_setup(ide_drive_t *drive)
/* write cache enabled? */
if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
- drive->wcache = 1;
+ drive->dev_flags |= IDE_DFLAG_WCACHE;
set_wcache(drive, 1);
}
static void ide_cacheflush_p(ide_drive_t *drive)
{
- if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0)
+ if (ata_id_flush_enabled(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
return;
if (do_idedisk_flushcache(drive))
@@ -918,13 +807,12 @@ static ide_driver_t idedisk_driver = {
.resume = ide_disk_resume,
.shutdown = ide_device_shutdown,
.version = IDEDISK_VERSION,
- .media = ide_disk,
.do_request = ide_do_rw_disk,
.end_request = ide_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
- .proc = idedisk_proc,
- .settings = idedisk_settings,
+ .proc = ide_disk_proc,
+ .settings = ide_disk_settings,
#endif
};
@@ -953,15 +841,16 @@ static int idedisk_open(struct inode *inode, struct file *filp)
idkp->openers++;
- if (drive->removable && idkp->openers == 1) {
+ if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
check_disk_change(inode->i_bdev);
/*
* Ignore the return code from door_lock,
* since the open() has already succeeded,
* and the door_lock is irrelevant at this point.
*/
- if (drive->doorlocking && idedisk_set_doorlock(drive, 1))
- drive->doorlocking = 0;
+ if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) &&
+ idedisk_set_doorlock(drive, 1))
+ drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
return 0;
}
@@ -975,9 +864,10 @@ static int idedisk_release(struct inode *inode, struct file *filp)
if (idkp->openers == 1)
ide_cacheflush_p(drive);
- if (drive->removable && idkp->openers == 1) {
- if (drive->doorlocking && idedisk_set_doorlock(drive, 0))
- drive->doorlocking = 0;
+ if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
+ if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) &&
+ idedisk_set_doorlock(drive, 0))
+ drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
idkp->openers--;
@@ -998,48 +888,25 @@ static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}
-static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = {
-{ HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, &ide_devset_address },
-{ HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, &ide_devset_multcount },
-{ HDIO_GET_NOWERR, HDIO_SET_NOWERR, &ide_devset_nowerr },
-{ HDIO_GET_WCACHE, HDIO_SET_WCACHE, &ide_devset_wcache },
-{ HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, &ide_devset_acoustic },
-{ 0 }
-};
-
-static int idedisk_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct block_device *bdev = inode->i_bdev;
- struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
- ide_drive_t *drive = idkp->drive;
- int err;
-
- err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
- if (err != -EOPNOTSUPP)
- return err;
-
- return generic_ide_ioctl(drive, file, bdev, cmd, arg);
-}
-
static int idedisk_media_changed(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_disk_g(disk);
ide_drive_t *drive = idkp->drive;
/* do not scan partitions twice if this is a removable device */
- if (drive->attach) {
- drive->attach = 0;
+ if (drive->dev_flags & IDE_DFLAG_ATTACH) {
+ drive->dev_flags &= ~IDE_DFLAG_ATTACH;
return 0;
}
+
/* if removable, always assume it was changed */
- return drive->removable;
+ return !!(drive->dev_flags & IDE_DFLAG_REMOVABLE);
}
static int idedisk_revalidate_disk(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_disk_g(disk);
- set_capacity(disk, idedisk_capacity(idkp->drive));
+ set_capacity(disk, ide_disk_capacity(idkp->drive));
return 0;
}
@@ -1047,7 +914,7 @@ static struct block_device_operations idedisk_ops = {
.owner = THIS_MODULE,
.open = idedisk_open,
.release = idedisk_release,
- .ioctl = idedisk_ioctl,
+ .ioctl = ide_disk_ioctl,
.getgeo = idedisk_getgeo,
.media_changed = idedisk_media_changed,
.revalidate_disk = idedisk_revalidate_disk
@@ -1088,19 +955,20 @@ static int ide_disk_probe(ide_drive_t *drive)
drive->driver_data = idkp;
idedisk_setup(drive);
- if ((!drive->head || drive->head > 16) && !drive->select.b.lba) {
+ if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
+ (drive->head == 0 || drive->head > 16)) {
printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
drive->name, drive->head);
- drive->attach = 0;
+ drive->dev_flags &= ~IDE_DFLAG_ATTACH;
} else
- drive->attach = 1;
+ drive->dev_flags |= IDE_DFLAG_ATTACH;
g->minors = IDE_DISK_MINORS;
g->driverfs_dev = &drive->gendev;
g->flags |= GENHD_FL_EXT_DEVT;
- if (drive->removable)
- g->flags |= GENHD_FL_REMOVABLE;
- set_capacity(g, idedisk_capacity(drive));
+ if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
+ g->flags = GENHD_FL_REMOVABLE;
+ set_capacity(g, ide_disk_capacity(drive));
g->fops = &idedisk_ops;
add_disk(g);
return 0;
@@ -1122,6 +990,7 @@ static int __init idedisk_init(void)
}
MODULE_ALIAS("ide:*m-disk*");
+MODULE_ALIAS("ide-disk");
module_init(idedisk_init);
module_exit(idedisk_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/ide/ide-disk.h b/drivers/ide/ide-disk.h
new file mode 100644
index 000000000000..a82fa4355665
--- /dev/null
+++ b/drivers/ide/ide-disk.h
@@ -0,0 +1,32 @@
+#ifndef __IDE_DISK_H
+#define __IDE_DISK_H
+
+struct ide_disk_obj {
+ ide_drive_t *drive;
+ ide_driver_t *driver;
+ struct gendisk *disk;
+ struct kref kref;
+ unsigned int openers; /* protected by BKL for now */
+};
+
+#define ide_disk_g(disk) \
+ container_of((disk)->private_data, struct ide_disk_obj, driver)
+
+/* ide-disk.c */
+sector_t ide_disk_capacity(ide_drive_t *);
+ide_decl_devset(address);
+ide_decl_devset(multcount);
+ide_decl_devset(nowerr);
+ide_decl_devset(wcache);
+ide_decl_devset(acoustic);
+
+/* ide-disk_ioctl.c */
+int ide_disk_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
+
+#ifdef CONFIG_IDE_PROC_FS
+/* ide-disk_proc.c */
+extern ide_proc_entry_t ide_disk_proc[];
+extern const struct ide_proc_devset ide_disk_settings[];
+#endif
+
+#endif /* __IDE_DISK_H */
diff --git a/drivers/ide/ide-disk_ioctl.c b/drivers/ide/ide-disk_ioctl.c
new file mode 100644
index 000000000000..a6cf1a03a806
--- /dev/null
+++ b/drivers/ide/ide-disk_ioctl.c
@@ -0,0 +1,29 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/hdreg.h>
+
+#include "ide-disk.h"
+
+static const struct ide_ioctl_devset ide_disk_ioctl_settings[] = {
+{ HDIO_GET_ADDRESS, HDIO_SET_ADDRESS, &ide_devset_address },
+{ HDIO_GET_MULTCOUNT, HDIO_SET_MULTCOUNT, &ide_devset_multcount },
+{ HDIO_GET_NOWERR, HDIO_SET_NOWERR, &ide_devset_nowerr },
+{ HDIO_GET_WCACHE, HDIO_SET_WCACHE, &ide_devset_wcache },
+{ HDIO_GET_ACOUSTIC, HDIO_SET_ACOUSTIC, &ide_devset_acoustic },
+{ 0 }
+};
+
+int ide_disk_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct block_device *bdev = inode->i_bdev;
+ struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
+ ide_drive_t *drive = idkp->drive;
+ int err;
+
+ err = ide_setting_ioctl(drive, bdev, cmd, arg, ide_disk_ioctl_settings);
+ if (err != -EOPNOTSUPP)
+ return err;
+
+ return generic_ide_ioctl(drive, file, bdev, cmd, arg);
+}
diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c
new file mode 100644
index 000000000000..4724976afe71
--- /dev/null
+++ b/drivers/ide/ide-disk_proc.c
@@ -0,0 +1,129 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/hdreg.h>
+
+#include "ide-disk.h"
+
+static int smart_enable(ide_drive_t *drive)
+{
+ ide_task_t args;
+ struct ide_taskfile *tf = &args.tf;
+
+ memset(&args, 0, sizeof(ide_task_t));
+ tf->feature = ATA_SMART_ENABLE;
+ tf->lbam = ATA_SMART_LBAM_PASS;
+ tf->lbah = ATA_SMART_LBAH_PASS;
+ tf->command = ATA_CMD_SMART;
+ args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ return ide_no_data_taskfile(drive, &args);
+}
+
+static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd)
+{
+ ide_task_t args;
+ struct ide_taskfile *tf = &args.tf;
+
+ memset(&args, 0, sizeof(ide_task_t));
+ tf->feature = sub_cmd;
+ tf->nsect = 0x01;
+ tf->lbam = ATA_SMART_LBAM_PASS;
+ tf->lbah = ATA_SMART_LBAH_PASS;
+ tf->command = ATA_CMD_SMART;
+ args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ args.data_phase = TASKFILE_IN;
+ (void) smart_enable(drive);
+ return ide_raw_taskfile(drive, &args, buf, 1);
+}
+
+static int proc_idedisk_read_cache
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ ide_drive_t *drive = (ide_drive_t *) data;
+ char *out = page;
+ int len;
+
+ if (drive->dev_flags & IDE_DFLAG_ID_READ)
+ len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2);
+ else
+ len = sprintf(out, "(none)\n");
+
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static int proc_idedisk_read_capacity
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ ide_drive_t*drive = (ide_drive_t *)data;
+ int len;
+
+ len = sprintf(page, "%llu\n", (long long)ide_disk_capacity(drive));
+
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static int proc_idedisk_read_smart(char *page, char **start, off_t off,
+ int count, int *eof, void *data, u8 sub_cmd)
+{
+ ide_drive_t *drive = (ide_drive_t *)data;
+ int len = 0, i = 0;
+
+ if (get_smart_data(drive, page, sub_cmd) == 0) {
+ unsigned short *val = (unsigned short *) page;
+ char *out = (char *)val + SECTOR_SIZE;
+
+ page = out;
+ do {
+ out += sprintf(out, "%04x%c", le16_to_cpu(*val),
+ (++i & 7) ? ' ' : '\n');
+ val += 1;
+ } while (i < SECTOR_SIZE / 2);
+ len = out - page;
+ }
+
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+static int proc_idedisk_read_sv
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ return proc_idedisk_read_smart(page, start, off, count, eof, data,
+ ATA_SMART_READ_VALUES);
+}
+
+static int proc_idedisk_read_st
+ (char *page, char **start, off_t off, int count, int *eof, void *data)
+{
+ return proc_idedisk_read_smart(page, start, off, count, eof, data,
+ ATA_SMART_READ_THRESHOLDS);
+}
+
+ide_proc_entry_t ide_disk_proc[] = {
+ { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL },
+ { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL },
+ { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
+ { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL },
+ { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL },
+ { NULL, 0, NULL, NULL }
+};
+
+ide_devset_rw_field(bios_cyl, bios_cyl);
+ide_devset_rw_field(bios_head, bios_head);
+ide_devset_rw_field(bios_sect, bios_sect);
+ide_devset_rw_field(failures, failures);
+ide_devset_rw_field(lun, lun);
+ide_devset_rw_field(max_failures, max_failures);
+
+const struct ide_proc_devset ide_disk_settings[] = {
+ IDE_PROC_DEVSET(acoustic, 0, 254),
+ IDE_PROC_DEVSET(address, 0, 2),
+ IDE_PROC_DEVSET(bios_cyl, 0, 65535),
+ IDE_PROC_DEVSET(bios_head, 0, 255),
+ IDE_PROC_DEVSET(bios_sect, 0, 63),
+ IDE_PROC_DEVSET(failures, 0, 65535),
+ IDE_PROC_DEVSET(lun, 0, 7),
+ IDE_PROC_DEVSET(max_failures, 0, 65535),
+ IDE_PROC_DEVSET(multcount, 0, 16),
+ IDE_PROC_DEVSET(nowerr, 0, 1),
+ IDE_PROC_DEVSET(wcache, 0, 1),
+ { 0 },
+};
diff --git a/drivers/ide/ide-dma-sff.c b/drivers/ide/ide-dma-sff.c
new file mode 100644
index 000000000000..0903782689e9
--- /dev/null
+++ b/drivers/ide/ide-dma-sff.c
@@ -0,0 +1,356 @@
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+/**
+ * config_drive_for_dma - attempt to activate IDE DMA
+ * @drive: the drive to place in DMA mode
+ *
+ * If the drive supports at least mode 2 DMA or UDMA of any kind
+ * then attempt to place it into DMA mode. Drives that are known to
+ * support DMA but predate the DMA properties or that are known
+ * to have DMA handling bugs are also set up appropriately based
+ * on the good/bad drive lists.
+ */
+
+int config_drive_for_dma(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u16 *id = drive->id;
+
+ if (drive->media != ide_disk) {
+ if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
+ return 0;
+ }
+
+ /*
+ * Enable DMA on any drive that has
+ * UltraDMA (mode 0/1/2/3/4/5/6) enabled
+ */
+ if ((id[ATA_ID_FIELD_VALID] & 4) &&
+ ((id[ATA_ID_UDMA_MODES] >> 8) & 0x7f))
+ return 1;
+
+ /*
+ * Enable DMA on any drive that has mode2 DMA
+ * (multi or single) enabled
+ */
+ if (id[ATA_ID_FIELD_VALID] & 2) /* regular DMA */
+ if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 ||
+ (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404)
+ return 1;
+
+ /* Consult the list of known "good" drives */
+ if (ide_dma_good_drive(drive))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * ide_dma_host_set - Enable/disable DMA on a host
+ * @drive: drive to control
+ *
+ * Enable/disable DMA on an IDE controller following generic
+ * bus-mastering IDE controller behaviour.
+ */
+
+void ide_dma_host_set(ide_drive_t *drive, int on)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 unit = drive->dn & 1;
+ u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ if (on)
+ dma_stat |= (1 << (5 + unit));
+ else
+ dma_stat &= ~(1 << (5 + unit));
+
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ writeb(dma_stat,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
+ else
+ outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ide_dma_host_set);
+
+/**
+ * ide_build_dmatable - build IDE DMA table
+ *
+ * ide_build_dmatable() prepares a dma request. We map the command
+ * to get the pci bus addresses of the buffers and then build up
+ * the PRD table that the IDE layer wants to be fed.
+ *
+ * Most chipsets correctly interpret a length of 0x0000 as 64KB,
+ * but at least one (e.g. CS5530) misinterprets it as zero (!).
+ * So we break the 64KB entry into two 32KB entries instead.
+ *
+ * Returns the number of built PRD entries if all went okay,
+ * returns 0 otherwise.
+ *
+ * May also be invoked from trm290.c
+ */
+
+int ide_build_dmatable(ide_drive_t *drive, struct request *rq)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ __le32 *table = (__le32 *)hwif->dmatable_cpu;
+ unsigned int is_trm290 = (hwif->chipset == ide_trm290) ? 1 : 0;
+ unsigned int count = 0;
+ int i;
+ struct scatterlist *sg;
+
+ hwif->sg_nents = ide_build_sglist(drive, rq);
+ if (hwif->sg_nents == 0)
+ return 0;
+
+ for_each_sg(hwif->sg_table, sg, hwif->sg_nents, i) {
+ u32 cur_addr, cur_len, xcount, bcount;
+
+ cur_addr = sg_dma_address(sg);
+ cur_len = sg_dma_len(sg);
+
+ /*
+ * Fill in the dma table, without crossing any 64kB boundaries.
+ * Most hardware requires 16-bit alignment of all blocks,
+ * but the trm290 requires 32-bit alignment.
+ */
+
+ while (cur_len) {
+ if (count++ >= PRD_ENTRIES)
+ goto use_pio_instead;
+
+ bcount = 0x10000 - (cur_addr & 0xffff);
+ if (bcount > cur_len)
+ bcount = cur_len;
+ *table++ = cpu_to_le32(cur_addr);
+ xcount = bcount & 0xffff;
+ if (is_trm290)
+ xcount = ((xcount >> 2) - 1) << 16;
+ if (xcount == 0x0000) {
+ if (count++ >= PRD_ENTRIES)
+ goto use_pio_instead;
+ *table++ = cpu_to_le32(0x8000);
+ *table++ = cpu_to_le32(cur_addr + 0x8000);
+ xcount = 0x8000;
+ }
+ *table++ = cpu_to_le32(xcount);
+ cur_addr += bcount;
+ cur_len -= bcount;
+ }
+ }
+
+ if (count) {
+ if (!is_trm290)
+ *--table |= cpu_to_le32(0x80000000);
+ return count;
+ }
+
+use_pio_instead:
+ printk(KERN_ERR "%s: %s\n", drive->name,
+ count ? "DMA table too small" : "empty DMA table?");
+
+ ide_destroy_dmatable(drive);
+
+ return 0; /* revert to PIO for this request */
+}
+EXPORT_SYMBOL_GPL(ide_build_dmatable);
+
+/**
+ * ide_dma_setup - begin a DMA phase
+ * @drive: target device
+ *
+ * Build an IDE DMA PRD (IDE speak for scatter gather table)
+ * and then set up the DMA transfer registers for a device
+ * that follows generic IDE PCI DMA behaviour. Controllers can
+ * override this function if they need to
+ *
+ * Returns 0 on success. If a PIO fallback is required then 1
+ * is returned.
+ */
+
+int ide_dma_setup(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = hwif->hwgroup->rq;
+ unsigned int reading;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 dma_stat;
+
+ if (rq_data_dir(rq))
+ reading = 0;
+ else
+ reading = 1 << 3;
+
+ /* fall back to pio! */
+ if (!ide_build_dmatable(drive, rq)) {
+ ide_map_sg(drive, rq);
+ return 1;
+ }
+
+ /* PRD table */
+ if (hwif->host_flags & IDE_HFLAG_MMIO)
+ writel(hwif->dmatable_dma,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
+ else
+ outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
+
+ /* specify r/w */
+ if (mmio)
+ writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ else
+ outb(reading, hwif->dma_base + ATA_DMA_CMD);
+
+ /* read DMA status for INTR & ERROR flags */
+ dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ /* clear INTR & ERROR flags */
+ if (mmio)
+ writeb(dma_stat | 6,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
+ else
+ outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
+
+ drive->waiting_for_dma = 1;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_dma_setup);
+
+/**
+ * dma_timer_expiry - handle a DMA timeout
+ * @drive: Drive that timed out
+ *
+ * An IDE DMA transfer timed out. In the event of an error we ask
+ * the driver to resolve the problem, if a DMA transfer is still
+ * in progress we continue to wait (arguably we need to add a
+ * secondary 'I don't care what the drive thinks' timeout here)
+ * Finally if we have an interrupt we let it complete the I/O.
+ * But only one time - we clear expiry and if it's still not
+ * completed after WAIT_CMD, we error and retry in PIO.
+ * This can occur if an interrupt is lost or due to hang or bugs.
+ */
+
+static int dma_timer_expiry(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ printk(KERN_WARNING "%s: %s: DMA status (0x%02x)\n",
+ drive->name, __func__, dma_stat);
+
+ if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */
+ return WAIT_CMD;
+
+ hwif->hwgroup->expiry = NULL; /* one free ride for now */
+
+ /* 1 dmaing, 2 error, 4 intr */
+ if (dma_stat & 2) /* ERROR */
+ return -1;
+
+ if (dma_stat & 1) /* DMAing */
+ return WAIT_CMD;
+
+ if (dma_stat & 4) /* Got an Interrupt */
+ return WAIT_CMD;
+
+ return 0; /* Status is unknown -- reset the bus */
+}
+
+void ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
+{
+ /* issue cmd to drive */
+ ide_execute_command(drive, command, &ide_dma_intr, 2 * WAIT_CMD,
+ dma_timer_expiry);
+}
+EXPORT_SYMBOL_GPL(ide_dma_exec_cmd);
+
+void ide_dma_start(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_cmd;
+
+ /* Note that this is done *after* the cmd has
+ * been issued to the drive, as per the BM-IDE spec.
+ * The Promise Ultra33 doesn't work correctly when
+ * we do this part before issuing the drive cmd.
+ */
+ if (hwif->host_flags & IDE_HFLAG_MMIO) {
+ dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ /* start DMA */
+ writeb(dma_cmd | 1,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ } else {
+ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+ outb(dma_cmd | 1, hwif->dma_base + ATA_DMA_CMD);
+ }
+
+ wmb();
+}
+EXPORT_SYMBOL_GPL(ide_dma_start);
+
+/* returns 1 on error, 0 otherwise */
+int ide_dma_end(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
+ u8 dma_stat = 0, dma_cmd = 0;
+
+ drive->waiting_for_dma = 0;
+
+ if (mmio) {
+ /* get DMA command mode */
+ dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ /* stop DMA */
+ writeb(dma_cmd & ~1,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
+ } else {
+ dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
+ outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
+ }
+
+ /* get DMA status */
+ dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ if (mmio)
+ /* clear the INTR & ERROR bits */
+ writeb(dma_stat | 6,
+ (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
+ else
+ outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
+
+ /* purge DMA mappings */
+ ide_destroy_dmatable(drive);
+ /* verify good DMA status */
+ wmb();
+ return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
+}
+EXPORT_SYMBOL_GPL(ide_dma_end);
+
+/* returns 1 if dma irq issued, 0 otherwise */
+int ide_dma_test_irq(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
+
+ /* return 1 if INTR asserted */
+ if ((dma_stat & 4) == 4)
+ return 1;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ide_dma_test_irq);
+
+const struct ide_dma_ops sff_dma_ops = {
+ .dma_host_set = ide_dma_host_set,
+ .dma_setup = ide_dma_setup,
+ .dma_exec_cmd = ide_dma_exec_cmd,
+ .dma_start = ide_dma_start,
+ .dma_end = ide_dma_end,
+ .dma_test_irq = ide_dma_test_irq,
+ .dma_timeout = ide_dma_timeout,
+ .dma_lost_irq = ide_dma_lost_irq,
+};
+EXPORT_SYMBOL_GPL(sff_dma_ops);
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index ef2f1504c0d5..fffd11717b2d 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -28,24 +28,13 @@
* for supplying a Promise UDMA board & WD UDMA drive for this work!
*/
-#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
#include <linux/ide.h>
-#include <linux/delay.h>
#include <linux/scatterlist.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-static const struct drive_list_entry drive_whitelist [] = {
-
+static const struct drive_list_entry drive_whitelist[] = {
{ "Micropolis 2112A" , NULL },
{ "CONNER CTMA 4000" , NULL },
{ "CONNER CTT8000-A" , NULL },
@@ -53,8 +42,7 @@ static const struct drive_list_entry drive_whitelist [] = {
{ NULL , NULL }
};
-static const struct drive_list_entry drive_blacklist [] = {
-
+static const struct drive_list_entry drive_blacklist[] = {
{ "WDC AC11000H" , NULL },
{ "WDC AC22100H" , NULL },
{ "WDC AC32500H" , NULL },
@@ -94,11 +82,11 @@ static const struct drive_list_entry drive_blacklist [] = {
* ide_dma_intr - IDE DMA interrupt handler
* @drive: the drive the interrupt is for
*
- * Handle an interrupt completing a read/write DMA transfer on an
+ * Handle an interrupt completing a read/write DMA transfer on an
* IDE device
*/
-
-ide_startstop_t ide_dma_intr (ide_drive_t *drive)
+
+ide_startstop_t ide_dma_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
u8 stat = 0, dma_stat = 0;
@@ -108,20 +96,19 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive)
if (OK_STAT(stat, DRIVE_READY, drive->bad_wstat | ATA_DRQ)) {
if (!dma_stat) {
- struct request *rq = HWGROUP(drive)->rq;
+ struct request *rq = hwif->hwgroup->rq;
task_end_request(drive, rq, stat);
return ide_stopped;
}
- printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n",
- drive->name, dma_stat);
+ printk(KERN_ERR "%s: %s: bad DMA status (0x%02x)\n",
+ drive->name, __func__, dma_stat);
}
return ide_error(drive, "dma_intr", stat);
}
-
EXPORT_SYMBOL_GPL(ide_dma_intr);
-static int ide_dma_good_drive(ide_drive_t *drive)
+int ide_dma_good_drive(ide_drive_t *drive)
{
return ide_in_drive_list(drive->id, drive_whitelist);
}
@@ -139,7 +126,7 @@ static int ide_dma_good_drive(ide_drive_t *drive)
int ide_build_sglist(ide_drive_t *drive, struct request *rq)
{
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg = hwif->sg_table;
ide_map_sg(drive, rq);
@@ -152,106 +139,8 @@ int ide_build_sglist(ide_drive_t *drive, struct request *rq)
return dma_map_sg(hwif->dev, sg, hwif->sg_nents,
hwif->sg_dma_direction);
}
-
EXPORT_SYMBOL_GPL(ide_build_sglist);
-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-/**
- * ide_build_dmatable - build IDE DMA table
- *
- * ide_build_dmatable() prepares a dma request. We map the command
- * to get the pci bus addresses of the buffers and then build up
- * the PRD table that the IDE layer wants to be fed. The code
- * knows about the 64K wrap bug in the CS5530.
- *
- * Returns the number of built PRD entries if all went okay,
- * returns 0 otherwise.
- *
- * May also be invoked from trm290.c
- */
-
-int ide_build_dmatable (ide_drive_t *drive, struct request *rq)
-{
- ide_hwif_t *hwif = HWIF(drive);
- __le32 *table = (__le32 *)hwif->dmatable_cpu;
- unsigned int is_trm290 = (hwif->chipset == ide_trm290) ? 1 : 0;
- unsigned int count = 0;
- int i;
- struct scatterlist *sg;
-
- hwif->sg_nents = i = ide_build_sglist(drive, rq);
-
- if (!i)
- return 0;
-
- sg = hwif->sg_table;
- while (i) {
- u32 cur_addr;
- u32 cur_len;
-
- cur_addr = sg_dma_address(sg);
- cur_len = sg_dma_len(sg);
-
- /*
- * Fill in the dma table, without crossing any 64kB boundaries.
- * Most hardware requires 16-bit alignment of all blocks,
- * but the trm290 requires 32-bit alignment.
- */
-
- while (cur_len) {
- if (count++ >= PRD_ENTRIES) {
- printk(KERN_ERR "%s: DMA table too small\n", drive->name);
- goto use_pio_instead;
- } else {
- u32 xcount, bcount = 0x10000 - (cur_addr & 0xffff);
-
- if (bcount > cur_len)
- bcount = cur_len;
- *table++ = cpu_to_le32(cur_addr);
- xcount = bcount & 0xffff;
- if (is_trm290)
- xcount = ((xcount >> 2) - 1) << 16;
- else if (xcount == 0x0000) {
- /*
- * Most chipsets correctly interpret a length of 0x0000 as 64KB,
- * but at least one (e.g. CS5530) misinterprets it as zero (!).
- * So here we break the 64KB entry into two 32KB entries instead.
- */
- if (count++ >= PRD_ENTRIES) {
- printk(KERN_ERR "%s: DMA table too small\n", drive->name);
- goto use_pio_instead;
- }
- *table++ = cpu_to_le32(0x8000);
- *table++ = cpu_to_le32(cur_addr + 0x8000);
- xcount = 0x8000;
- }
- *table++ = cpu_to_le32(xcount);
- cur_addr += bcount;
- cur_len -= bcount;
- }
- }
-
- sg = sg_next(sg);
- i--;
- }
-
- if (count) {
- if (!is_trm290)
- *--table |= cpu_to_le32(0x80000000);
- return count;
- }
-
- printk(KERN_ERR "%s: empty DMA table?\n", drive->name);
-
-use_pio_instead:
- ide_destroy_dmatable(drive);
-
- return 0; /* revert to PIO for this request */
-}
-
-EXPORT_SYMBOL_GPL(ide_build_dmatable);
-#endif
-
/**
* ide_destroy_dmatable - clean up DMA mapping
* @drive: The drive to unmap
@@ -262,147 +151,30 @@ EXPORT_SYMBOL_GPL(ide_build_dmatable);
* an oops as only one mapping can be live for each target at a given
* time.
*/
-
-void ide_destroy_dmatable (ide_drive_t *drive)
+
+void ide_destroy_dmatable(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
dma_unmap_sg(hwif->dev, hwif->sg_table, hwif->sg_nents,
hwif->sg_dma_direction);
}
-
EXPORT_SYMBOL_GPL(ide_destroy_dmatable);
-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-/**
- * config_drive_for_dma - attempt to activate IDE DMA
- * @drive: the drive to place in DMA mode
- *
- * If the drive supports at least mode 2 DMA or UDMA of any kind
- * then attempt to place it into DMA mode. Drives that are known to
- * support DMA but predate the DMA properties or that are known
- * to have DMA handling bugs are also set up appropriately based
- * on the good/bad drive lists.
- */
-
-static int config_drive_for_dma (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u16 *id = drive->id;
-
- if (drive->media != ide_disk) {
- if (hwif->host_flags & IDE_HFLAG_NO_ATAPI_DMA)
- return 0;
- }
-
- /*
- * Enable DMA on any drive that has
- * UltraDMA (mode 0/1/2/3/4/5/6) enabled
- */
- if ((id[ATA_ID_FIELD_VALID] & 4) &&
- ((id[ATA_ID_UDMA_MODES] >> 8) & 0x7f))
- return 1;
-
- /*
- * Enable DMA on any drive that has mode2 DMA
- * (multi or single) enabled
- */
- if (id[ATA_ID_FIELD_VALID] & 2) /* regular DMA */
- if ((id[ATA_ID_MWDMA_MODES] & 0x404) == 0x404 ||
- (id[ATA_ID_SWDMA_MODES] & 0x404) == 0x404)
- return 1;
-
- /* Consult the list of known "good" drives */
- if (ide_dma_good_drive(drive))
- return 1;
-
- return 0;
-}
-
-/**
- * dma_timer_expiry - handle a DMA timeout
- * @drive: Drive that timed out
- *
- * An IDE DMA transfer timed out. In the event of an error we ask
- * the driver to resolve the problem, if a DMA transfer is still
- * in progress we continue to wait (arguably we need to add a
- * secondary 'I don't care what the drive thinks' timeout here)
- * Finally if we have an interrupt we let it complete the I/O.
- * But only one time - we clear expiry and if it's still not
- * completed after WAIT_CMD, we error and retry in PIO.
- * This can occur if an interrupt is lost or due to hang or bugs.
- */
-
-static int dma_timer_expiry (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- printk(KERN_WARNING "%s: dma_timer_expiry: dma status == 0x%02x\n",
- drive->name, dma_stat);
-
- if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */
- return WAIT_CMD;
-
- HWGROUP(drive)->expiry = NULL; /* one free ride for now */
-
- /* 1 dmaing, 2 error, 4 intr */
- if (dma_stat & 2) /* ERROR */
- return -1;
-
- if (dma_stat & 1) /* DMAing */
- return WAIT_CMD;
-
- if (dma_stat & 4) /* Got an Interrupt */
- return WAIT_CMD;
-
- return 0; /* Status is unknown -- reset the bus */
-}
-
-/**
- * ide_dma_host_set - Enable/disable DMA on a host
- * @drive: drive to control
- *
- * Enable/disable DMA on an IDE controller following generic
- * bus-mastering IDE controller behaviour.
- */
-
-void ide_dma_host_set(ide_drive_t *drive, int on)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 unit = (drive->select.b.unit & 0x01);
- u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- if (on)
- dma_stat |= (1 << (5 + unit));
- else
- dma_stat &= ~(1 << (5 + unit));
-
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- writeb(dma_stat,
- (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
- else
- outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
-}
-
-EXPORT_SYMBOL_GPL(ide_dma_host_set);
-#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
-
/**
* ide_dma_off_quietly - Generic DMA kill
* @drive: drive to control
*
- * Turn off the current DMA on this IDE controller.
+ * Turn off the current DMA on this IDE controller.
*/
void ide_dma_off_quietly(ide_drive_t *drive)
{
- drive->using_dma = 0;
+ drive->dev_flags &= ~IDE_DFLAG_USING_DMA;
ide_toggle_bounce(drive, 0);
drive->hwif->dma_ops->dma_host_set(drive, 0);
}
-
EXPORT_SYMBOL(ide_dma_off_quietly);
/**
@@ -418,7 +190,6 @@ void ide_dma_off(ide_drive_t *drive)
printk(KERN_INFO "%s: DMA disabled\n", drive->name);
ide_dma_off_quietly(drive);
}
-
EXPORT_SYMBOL(ide_dma_off);
/**
@@ -430,167 +201,13 @@ EXPORT_SYMBOL(ide_dma_off);
void ide_dma_on(ide_drive_t *drive)
{
- drive->using_dma = 1;
+ drive->dev_flags |= IDE_DFLAG_USING_DMA;
ide_toggle_bounce(drive, 1);
drive->hwif->dma_ops->dma_host_set(drive, 1);
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-/**
- * ide_dma_setup - begin a DMA phase
- * @drive: target device
- *
- * Build an IDE DMA PRD (IDE speak for scatter gather table)
- * and then set up the DMA transfer registers for a device
- * that follows generic IDE PCI DMA behaviour. Controllers can
- * override this function if they need to
- *
- * Returns 0 on success. If a PIO fallback is required then 1
- * is returned.
- */
-
-int ide_dma_setup(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = HWGROUP(drive)->rq;
- unsigned int reading;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 dma_stat;
-
- if (rq_data_dir(rq))
- reading = 0;
- else
- reading = 1 << 3;
-
- /* fall back to pio! */
- if (!ide_build_dmatable(drive, rq)) {
- ide_map_sg(drive, rq);
- return 1;
- }
-
- /* PRD table */
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- writel(hwif->dmatable_dma,
- (void __iomem *)(hwif->dma_base + ATA_DMA_TABLE_OFS));
- else
- outl(hwif->dmatable_dma, hwif->dma_base + ATA_DMA_TABLE_OFS);
-
- /* specify r/w */
- if (mmio)
- writeb(reading, (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- else
- outb(reading, hwif->dma_base + ATA_DMA_CMD);
-
- /* read DMA status for INTR & ERROR flags */
- dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- /* clear INTR & ERROR flags */
- if (mmio)
- writeb(dma_stat | 6,
- (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
- else
- outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
-
- drive->waiting_for_dma = 1;
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(ide_dma_setup);
-
-void ide_dma_exec_cmd(ide_drive_t *drive, u8 command)
-{
- /* issue cmd to drive */
- ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, dma_timer_expiry);
-}
-EXPORT_SYMBOL_GPL(ide_dma_exec_cmd);
-
-void ide_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_cmd;
-
- /* Note that this is done *after* the cmd has
- * been issued to the drive, as per the BM-IDE spec.
- * The Promise Ultra33 doesn't work correctly when
- * we do this part before issuing the drive cmd.
- */
- if (hwif->host_flags & IDE_HFLAG_MMIO) {
- dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- /* start DMA */
- writeb(dma_cmd | 1,
- (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- } else {
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd | 1, hwif->dma_base + ATA_DMA_CMD);
- }
-
- hwif->dma = 1;
- wmb();
-}
-
-EXPORT_SYMBOL_GPL(ide_dma_start);
-
-/* returns 1 on error, 0 otherwise */
-int __ide_dma_end (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 dma_stat = 0, dma_cmd = 0;
-
- drive->waiting_for_dma = 0;
-
- if (mmio) {
- /* get DMA command mode */
- dma_cmd = readb((void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- /* stop DMA */
- writeb(dma_cmd & ~1,
- (void __iomem *)(hwif->dma_base + ATA_DMA_CMD));
- } else {
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- }
-
- /* get DMA status */
- dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- if (mmio)
- /* clear the INTR & ERROR bits */
- writeb(dma_stat | 6,
- (void __iomem *)(hwif->dma_base + ATA_DMA_STATUS));
- else
- outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
-
- /* purge DMA mappings */
- ide_destroy_dmatable(drive);
- /* verify good DMA status */
- hwif->dma = 0;
- wmb();
- return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
-}
-
-EXPORT_SYMBOL(__ide_dma_end);
-
-/* returns 1 if dma irq issued, 0 otherwise */
-int ide_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
-
- /* return 1 if INTR asserted */
- if ((dma_stat & 4) == 4)
- return 1;
- if (!drive->waiting_for_dma)
- printk(KERN_WARNING "%s: (%s) called while not waiting\n",
- drive->name, __func__);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ide_dma_test_irq);
-#else
-static inline int config_drive_for_dma(ide_drive_t *drive) { return 0; }
-#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
-
-int __ide_dma_bad_drive (ide_drive_t *drive)
+int __ide_dma_bad_drive(ide_drive_t *drive)
{
u16 *id = drive->id;
@@ -602,7 +219,6 @@ int __ide_dma_bad_drive (ide_drive_t *drive)
}
return 0;
}
-
EXPORT_SYMBOL(__ide_dma_bad_drive);
static const u8 xfer_mode_bases[] = {
@@ -618,7 +234,7 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
const struct ide_port_ops *port_ops = hwif->port_ops;
unsigned int mask = 0;
- switch(base) {
+ switch (base) {
case XFER_UDMA_0:
if ((id[ATA_ID_FIELD_VALID] & 4) == 0)
break;
@@ -719,7 +335,6 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
return mode;
}
-
EXPORT_SYMBOL_GPL(ide_find_dma_mode);
static int ide_tune_dma(ide_drive_t *drive)
@@ -727,7 +342,8 @@ static int ide_tune_dma(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
u8 speed;
- if (drive->nodma || ata_id_has_dma(drive->id) == 0)
+ if (ata_id_has_dma(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_NODMA))
return 0;
/* consult the list of known "bad" drives */
@@ -827,66 +443,59 @@ void ide_check_dma_crc(ide_drive_t *drive)
ide_dma_on(drive);
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_SFF
-void ide_dma_lost_irq (ide_drive_t *drive)
+void ide_dma_lost_irq(ide_drive_t *drive)
{
- printk("%s: DMA interrupt recovery\n", drive->name);
+ printk(KERN_ERR "%s: DMA interrupt recovery\n", drive->name);
}
+EXPORT_SYMBOL_GPL(ide_dma_lost_irq);
-EXPORT_SYMBOL(ide_dma_lost_irq);
-
-void ide_dma_timeout (ide_drive_t *drive)
+void ide_dma_timeout(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name);
if (hwif->dma_ops->dma_test_irq(drive))
return;
+ ide_dump_status(drive, "DMA timeout", hwif->tp_ops->read_status(hwif));
+
hwif->dma_ops->dma_end(drive);
}
-
-EXPORT_SYMBOL(ide_dma_timeout);
+EXPORT_SYMBOL_GPL(ide_dma_timeout);
void ide_release_dma_engine(ide_hwif_t *hwif)
{
if (hwif->dmatable_cpu) {
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ int prd_size = hwif->prd_max_nents * hwif->prd_ent_size;
- pci_free_consistent(pdev, PRD_ENTRIES * PRD_BYTES,
- hwif->dmatable_cpu, hwif->dmatable_dma);
+ dma_free_coherent(hwif->dev, prd_size,
+ hwif->dmatable_cpu, hwif->dmatable_dma);
hwif->dmatable_cpu = NULL;
}
}
+EXPORT_SYMBOL_GPL(ide_release_dma_engine);
int ide_allocate_dma_engine(ide_hwif_t *hwif)
{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
+ int prd_size;
- hwif->dmatable_cpu = pci_alloc_consistent(pdev,
- PRD_ENTRIES * PRD_BYTES,
- &hwif->dmatable_dma);
+ if (hwif->prd_max_nents == 0)
+ hwif->prd_max_nents = PRD_ENTRIES;
+ if (hwif->prd_ent_size == 0)
+ hwif->prd_ent_size = PRD_BYTES;
- if (hwif->dmatable_cpu)
- return 0;
+ prd_size = hwif->prd_max_nents * hwif->prd_ent_size;
- printk(KERN_ERR "%s: -- Error, unable to allocate DMA table.\n",
+ hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev, prd_size,
+ &hwif->dmatable_dma,
+ GFP_ATOMIC);
+ if (hwif->dmatable_cpu == NULL) {
+ printk(KERN_ERR "%s: unable to allocate PRD table\n",
hwif->name);
+ return -ENOMEM;
+ }
- return 1;
+ return 0;
}
EXPORT_SYMBOL_GPL(ide_allocate_dma_engine);
-
-const struct ide_dma_ops sff_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_timeout = ide_dma_timeout,
- .dma_lost_irq = ide_dma_lost_irq,
-};
-EXPORT_SYMBOL_GPL(sff_dma_ops);
-#endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index d36f155470a4..cf0aa25470ee 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -16,6 +16,7 @@
*/
#define DRV_NAME "ide-floppy"
+#define PFX DRV_NAME ": "
#define IDEFLOPPY_VERSION "1.00"
@@ -48,17 +49,17 @@
#include "ide-floppy.h"
-/* define to see debug info */
-#define IDEFLOPPY_DEBUG_LOG 0
+/* module parameters */
+static unsigned long debug_mask;
+module_param(debug_mask, ulong, 0644);
-/* #define IDEFLOPPY_DEBUG(fmt, args...) printk(KERN_INFO fmt, ## args) */
-#define IDEFLOPPY_DEBUG(fmt, args...)
+/* define to see debug info */
+#define IDEFLOPPY_DEBUG_LOG 0
#if IDEFLOPPY_DEBUG_LOG
-#define debug_log(fmt, args...) \
- printk(KERN_INFO "ide-floppy: " fmt, ## args)
+#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, args)
#else
-#define debug_log(fmt, args...) do {} while (0)
+#define ide_debug_log(lvl, fmt, args...) do {} while (0)
#endif
/*
@@ -73,18 +74,17 @@
#define CAPACITY_CURRENT 0x02
#define CAPACITY_NO_CARTRIDGE 0x03
-#define IDEFLOPPY_TICKS_DELAY HZ/20 /* default delay for ZIP 100 (50ms) */
+/*
+ * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
+ * was apparently being deasserted before the unit was ready to receive data.
+ */
+#define IDEFLOPPY_PC_DELAY (HZ/20) /* default delay for ZIP 100 (50ms) */
/* Error code returned in rq->errors to the higher part of the driver. */
#define IDEFLOPPY_ERROR_GENERAL 101
static DEFINE_MUTEX(idefloppy_ref_mutex);
-#define to_ide_floppy(obj) container_of(obj, struct ide_floppy_obj, kref)
-
-#define ide_floppy_g(disk) \
- container_of((disk)->private_data, struct ide_floppy_obj, driver)
-
static void idefloppy_cleanup_obj(struct kref *);
static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
@@ -92,7 +92,7 @@ static struct ide_floppy_obj *ide_floppy_get(struct gendisk *disk)
struct ide_floppy_obj *floppy = NULL;
mutex_lock(&idefloppy_ref_mutex);
- floppy = ide_floppy_g(disk);
+ floppy = ide_drv_g(disk, ide_floppy_obj);
if (floppy) {
if (ide_device_get(floppy->drive))
floppy = NULL;
@@ -123,13 +123,21 @@ static int idefloppy_end_request(ide_drive_t *drive, int uptodate, int nsecs)
struct request *rq = HWGROUP(drive)->rq;
int error;
- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
switch (uptodate) {
- case 0: error = IDEFLOPPY_ERROR_GENERAL; break;
- case 1: error = 0; break;
- default: error = uptodate;
+ case 0:
+ error = IDEFLOPPY_ERROR_GENERAL;
+ break;
+
+ case 1:
+ error = 0;
+ break;
+
+ default:
+ error = uptodate;
}
+
if (error)
floppy->failed_pc = NULL;
/* Why does this happen? */
@@ -156,13 +164,13 @@ static void idefloppy_update_buffers(ide_drive_t *drive,
idefloppy_end_request(drive, 1, 0);
}
-static void ide_floppy_callback(ide_drive_t *drive)
+static void ide_floppy_callback(ide_drive_t *drive, int dsc)
{
idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc *pc = floppy->pc;
+ struct ide_atapi_pc *pc = drive->pc;
int uptodate = pc->error ? 0 : 1;
- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
if (floppy->failed_pc == pc)
floppy->failed_pc = NULL;
@@ -171,7 +179,7 @@ static void ide_floppy_callback(ide_drive_t *drive)
(pc->rq && blk_pc_request(pc->rq)))
uptodate = 1; /* FIXME */
else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
- u8 *buf = floppy->pc->buf;
+ u8 *buf = pc->buf;
if (!pc->error) {
floppy->sense_key = buf[2] & 0x0F;
@@ -181,99 +189,20 @@ static void ide_floppy_callback(ide_drive_t *drive)
(u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
if (floppy->failed_pc)
- debug_log("pc = %x, ", floppy->failed_pc->c[0]);
+ ide_debug_log(IDE_DBG_PC, "pc = %x, ",
+ floppy->failed_pc->c[0]);
- debug_log("sense key = %x, asc = %x, ascq = %x\n",
- floppy->sense_key, floppy->asc, floppy->ascq);
+ ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
+ "ascq = %x\n", floppy->sense_key,
+ floppy->asc, floppy->ascq);
} else
- printk(KERN_ERR "Error in REQUEST SENSE itself - "
- "Aborting request!\n");
+ printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
+ "Aborting request!\n");
}
idefloppy_end_request(drive, uptodate, 0);
}
-void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = GPCMD_REQUEST_SENSE;
- pc->c[4] = 255;
- pc->req_xfer = 18;
-}
-
-/*
- * Called when an error was detected during the last packet command. We queue a
- * request sense packet command in the head of the request list.
- */
-static void idefloppy_retry_pc(ide_drive_t *drive)
-{
- struct ide_floppy_obj *floppy = drive->driver_data;
- struct request *rq = &floppy->request_sense_rq;
- struct ide_atapi_pc *pc = &floppy->request_sense_pc;
-
- (void)ide_read_error(drive);
- ide_floppy_create_request_sense_cmd(pc);
- ide_queue_pc_head(drive, floppy->disk, pc, rq);
-}
-
-/* The usual interrupt handler called during a packet command. */
-static ide_startstop_t idefloppy_pc_intr(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- return ide_pc_intr(drive, floppy->pc, idefloppy_pc_intr,
- WAIT_FLOPPY_CMD, NULL, idefloppy_update_buffers,
- idefloppy_retry_pc, NULL, ide_io_buffers);
-}
-
-/*
- * What we have here is a classic case of a top half / bottom half interrupt
- * service routine. In interrupt mode, the device sends an interrupt to signal
- * that it is ready to receive a packet. However, we need to delay about 2-3
- * ticks before issuing the packet or we gets in trouble.
- */
-static int idefloppy_transfer_pc(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
-
- /* Send the actual packet */
- drive->hwif->tp_ops->output_data(drive, NULL, floppy->pc->c, 12);
-
- /* Timeout for the packet command */
- return WAIT_FLOPPY_CMD;
-}
-
-/*
- * Called as an interrupt (or directly). When the device says it's ready for a
- * packet, we schedule the packet transfer to occur about 2-3 ticks later in
- * transfer_pc.
- */
-static ide_startstop_t idefloppy_start_pc_transfer(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct ide_atapi_pc *pc = floppy->pc;
- ide_expiry_t *expiry;
- unsigned int timeout;
-
- /*
- * The following delay solves a problem with ATAPI Zip 100 drives
- * where the Busy flag was apparently being deasserted before the
- * unit was ready to receive data. This was happening on a
- * 1200 MHz Athlon system. 10/26/01 25msec is too short,
- * 40 and 50msec work well. idefloppy_pc_intr will not be actually
- * used until after the packet is moved in about 50 msec.
- */
- if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
- timeout = floppy->ticks;
- expiry = &idefloppy_transfer_pc;
- } else {
- timeout = WAIT_FLOPPY_CMD;
- expiry = NULL;
- }
-
- return ide_transfer_pc(drive, pc, idefloppy_pc_intr, timeout, expiry);
-}
-
static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
struct ide_atapi_pc *pc)
{
@@ -283,7 +212,7 @@ static void ide_floppy_report_error(idefloppy_floppy_t *floppy,
floppy->ascq == 0x00)
return;
- printk(KERN_ERR "ide-floppy: %s: I/O error, pc = %2x, key = %2x, "
+ printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
"asc = %2x, ascq = %2x\n",
floppy->drive->name, pc->c[0], floppy->sense_key,
floppy->asc, floppy->ascq);
@@ -298,8 +227,9 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
if (floppy->failed_pc == NULL &&
pc->c[0] != GPCMD_REQUEST_SENSE)
floppy->failed_pc = pc;
+
/* Set the current packet command */
- floppy->pc = pc;
+ drive->pc = pc;
if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
@@ -308,16 +238,15 @@ static ide_startstop_t idefloppy_issue_pc(ide_drive_t *drive,
pc->error = IDEFLOPPY_ERROR_GENERAL;
floppy->failed_pc = NULL;
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
- debug_log("Retry number - %d\n", pc->retries);
+ ide_debug_log(IDE_DBG_FUNC, "%s: Retry #%d\n", __func__, pc->retries);
pc->retries++;
- return ide_issue_pc(drive, pc, idefloppy_start_pc_transfer,
- WAIT_FLOPPY_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_FLOPPY_CMD, NULL);
}
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
@@ -347,23 +276,23 @@ void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
length += 32;
break;
default:
- printk(KERN_ERR "ide-floppy: unsupported page code "
- "in create_mode_sense_cmd\n");
+ printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
}
put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
pc->req_xfer = length;
}
-static void idefloppy_create_rw_cmd(idefloppy_floppy_t *floppy,
+static void idefloppy_create_rw_cmd(ide_drive_t *drive,
struct ide_atapi_pc *pc, struct request *rq,
unsigned long sector)
{
+ idefloppy_floppy_t *floppy = drive->driver_data;
int block = sector / floppy->bs_factor;
int blocks = rq->nr_sectors / floppy->bs_factor;
int cmd = rq_data_dir(rq);
- debug_log("create_rw10_cmd: block == %d, blocks == %d\n",
- block, blocks);
+ ide_debug_log(IDE_DBG_FUNC, "%s: block: %d, blocks: %d\n", __func__,
+ block, blocks);
ide_init_pc(pc);
pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
@@ -408,41 +337,42 @@ static ide_startstop_t idefloppy_do_request(ide_drive_t *drive,
struct ide_atapi_pc *pc;
unsigned long block = (unsigned long)block_s;
- debug_log("%s: dev: %s, cmd: 0x%x, cmd_type: %x, errors: %d\n",
- __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?",
- rq->cmd[0], rq->cmd_type, rq->errors);
+ ide_debug_log(IDE_DBG_FUNC, "%s: dev: %s, cmd: 0x%x, cmd_type: %x, "
+ "errors: %d\n",
+ __func__, rq->rq_disk ? rq->rq_disk->disk_name : "?",
+ rq->cmd[0], rq->cmd_type, rq->errors);
- debug_log("%s: sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",
- __func__, (long)rq->sector, rq->nr_sectors,
- rq->current_nr_sectors);
+ ide_debug_log(IDE_DBG_FUNC, "%s: sector: %ld, nr_sectors: %ld, "
+ "current_nr_sectors: %d\n",
+ __func__, (long)rq->sector, rq->nr_sectors,
+ rq->current_nr_sectors);
if (rq->errors >= ERROR_MAX) {
if (floppy->failed_pc)
ide_floppy_report_error(floppy, floppy->failed_pc);
else
- printk(KERN_ERR "ide-floppy: %s: I/O error\n",
- drive->name);
+ printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
+
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
if (blk_fs_request(rq)) {
if (((long)rq->sector % floppy->bs_factor) ||
(rq->nr_sectors % floppy->bs_factor)) {
- printk(KERN_ERR "%s: unsupported r/w request size\n",
- drive->name);
+ printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
+ drive->name);
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
pc = &floppy->queued_pc;
- idefloppy_create_rw_cmd(floppy, pc, rq, block);
+ idefloppy_create_rw_cmd(drive, pc, rq, block);
} else if (blk_special_request(rq)) {
pc = (struct ide_atapi_pc *) rq->buffer;
} else if (blk_pc_request(rq)) {
pc = &floppy->queued_pc;
idefloppy_blockpc_cmd(floppy, pc, rq);
} else {
- blk_dump_rq_flags(rq,
- "ide-floppy: unsupported command in queue");
+ blk_dump_rq_flags(rq, PFX "unsupported command in queue");
idefloppy_end_request(drive, 0, 0);
return ide_stopped;
}
@@ -475,8 +405,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
ide_floppy_create_mode_sense_cmd(&pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
if (ide_queue_pc_tail(drive, disk, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get flexible disk page"
- " parameters\n");
+ printk(KERN_ERR PFX "Can't get flexible disk page params\n");
return 1;
}
@@ -499,7 +428,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
capacity = cyls * heads * sectors * sector_size;
if (memcmp(page, &floppy->flexible_disk_page, 32))
- printk(KERN_INFO "%s: %dkB, %d/%d/%d CHS, %d kBps, "
+ printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
"%d sector size, %d rpm\n",
drive->name, capacity / 1024, cyls, heads,
sectors, transfer_rate / 8, sector_size, rpm);
@@ -511,7 +440,7 @@ static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive)
lba_capacity = floppy->blocks * floppy->block_size;
if (capacity < lba_capacity) {
- printk(KERN_NOTICE "%s: The disk reports a capacity of %d "
+ printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
"bytes, but the drive only handles %d\n",
drive->name, lba_capacity, capacity);
floppy->blocks = floppy->block_size ?
@@ -541,7 +470,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
ide_floppy_create_read_capacity_cmd(&pc);
if (ide_queue_pc_tail(drive, disk, &pc)) {
- printk(KERN_ERR "ide-floppy: Can't get floppy parameters\n");
+ printk(KERN_ERR PFX "Can't get floppy parameters\n");
return 1;
}
header_len = pc.buf[3];
@@ -554,8 +483,9 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
blocks = be32_to_cpup((__be32 *)&pc.buf[desc_start]);
length = be16_to_cpup((__be16 *)&pc.buf[desc_start + 6]);
- debug_log("Descriptor %d: %dkB, %d blocks, %d sector size\n",
- i, blocks * length / 1024, blocks, length);
+ ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
+ "%d sector size\n",
+ i, blocks * length / 1024, blocks, length);
if (i)
continue;
@@ -575,23 +505,24 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
case CAPACITY_CURRENT:
/* Normal Zip/LS-120 disks */
if (memcmp(cap_desc, &floppy->cap_desc, 8))
- printk(KERN_INFO "%s: %dkB, %d blocks, %d "
- "sector size\n", drive->name,
- blocks * length / 1024, blocks, length);
+ printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
+ "sector size\n",
+ drive->name, blocks * length / 1024,
+ blocks, length);
memcpy(&floppy->cap_desc, cap_desc, 8);
if (!length || length % 512) {
- printk(KERN_NOTICE "%s: %d bytes block size "
- "not supported\n", drive->name, length);
+ printk(KERN_NOTICE PFX "%s: %d bytes block size"
+ " not supported\n", drive->name, length);
} else {
floppy->blocks = blocks;
floppy->block_size = length;
floppy->bs_factor = length / 512;
if (floppy->bs_factor != 1)
- printk(KERN_NOTICE "%s: warning: non "
- "512 bytes block size not "
- "fully supported\n",
- drive->name);
+ printk(KERN_NOTICE PFX "%s: Warning: "
+ "non 512 bytes block size not "
+ "fully supported\n",
+ drive->name);
rc = 0;
}
break;
@@ -600,15 +531,16 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
* This is a KERN_ERR so it appears on screen
* for the user to see
*/
- printk(KERN_ERR "%s: No disk in drive\n", drive->name);
+ printk(KERN_ERR PFX "%s: No disk in drive\n",
+ drive->name);
break;
case CAPACITY_INVALID:
- printk(KERN_ERR "%s: Invalid capacity for disk "
+ printk(KERN_ERR PFX "%s: Invalid capacity for disk "
"in drive\n", drive->name);
break;
}
- debug_log("Descriptor 0 Code: %d\n",
- pc.buf[desc_start + 4] & 0x03);
+ ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d\n",
+ pc.buf[desc_start + 4] & 0x03);
}
/* Clik! disk does not support get_flexible_disk_page */
@@ -620,7 +552,7 @@ static int ide_floppy_get_capacity(ide_drive_t *drive)
return rc;
}
-static sector_t idefloppy_capacity(ide_drive_t *drive)
+sector_t ide_floppy_capacity(ide_drive_t *drive)
{
idefloppy_floppy_t *floppy = drive->driver_data;
unsigned long capacity = floppy->blocks * floppy->bs_factor;
@@ -628,46 +560,14 @@ static sector_t idefloppy_capacity(ide_drive_t *drive)
return capacity;
}
-#ifdef CONFIG_IDE_PROC_FS
-ide_devset_rw_field(bios_cyl, bios_cyl);
-ide_devset_rw_field(bios_head, bios_head);
-ide_devset_rw_field(bios_sect, bios_sect);
-
-static int get_ticks(ide_drive_t *drive)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- return floppy->ticks;
-}
-
-static int set_ticks(ide_drive_t *drive, int arg)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- floppy->ticks = arg;
- return 0;
-}
-
-IDE_DEVSET(ticks, DS_SYNC, get_ticks, set_ticks);
-
-static const struct ide_proc_devset idefloppy_settings[] = {
- IDE_PROC_DEVSET(bios_cyl, 0, 1023),
- IDE_PROC_DEVSET(bios_head, 0, 255),
- IDE_PROC_DEVSET(bios_sect, 0, 63),
- IDE_PROC_DEVSET(ticks, 0, 255),
- { 0 },
-};
-#endif
-
static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
{
u16 *id = drive->id;
- u8 gcw[2];
-
- *((u16 *)&gcw) = id[ATA_ID_CONFIG];
- drive->pc_callback = ide_floppy_callback;
+ drive->pc_callback = ide_floppy_callback;
+ drive->pc_update_buffers = idefloppy_update_buffers;
+ drive->pc_io_buffers = ide_io_buffers;
- if (((gcw[0] & 0x60) >> 5) == 1)
- drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
/*
* We used to check revisions here. At this point however I'm giving up.
* Just assume they are all broken, its easier.
@@ -680,7 +580,7 @@ static void idefloppy_setup(ide_drive_t *drive, idefloppy_floppy_t *floppy)
if (!strncmp((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI", 20)) {
drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
/* This value will be visible in the /proc/ide/hdx/settings */
- floppy->ticks = IDEFLOPPY_TICKS_DELAY;
+ drive->pc_delay = IDEFLOPPY_PC_DELAY;
blk_queue_max_sectors(drive->queue, 64);
}
@@ -714,7 +614,7 @@ static void ide_floppy_remove(ide_drive_t *drive)
static void idefloppy_cleanup_obj(struct kref *kref)
{
- struct ide_floppy_obj *floppy = to_ide_floppy(kref);
+ struct ide_floppy_obj *floppy = to_ide_drv(kref, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
struct gendisk *g = floppy->disk;
@@ -724,24 +624,6 @@ static void idefloppy_cleanup_obj(struct kref *kref)
kfree(floppy);
}
-#ifdef CONFIG_IDE_PROC_FS
-static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- ide_drive_t*drive = (ide_drive_t *)data;
- int len;
-
- len = sprintf(page, "%llu\n", (long long)idefloppy_capacity(drive));
- PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
-}
-
-static ide_proc_entry_t idefloppy_proc[] = {
- { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
- { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
- { NULL, 0, NULL, NULL }
-};
-#endif /* CONFIG_IDE_PROC_FS */
-
static int ide_floppy_probe(ide_drive_t *);
static ide_driver_t idefloppy_driver = {
@@ -753,13 +635,12 @@ static ide_driver_t idefloppy_driver = {
.probe = ide_floppy_probe,
.remove = ide_floppy_remove,
.version = IDEFLOPPY_VERSION,
- .media = ide_floppy,
.do_request = idefloppy_do_request,
.end_request = idefloppy_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
- .proc = idefloppy_proc,
- .settings = idefloppy_settings,
+ .proc = ide_floppy_proc,
+ .settings = ide_floppy_settings,
#endif
};
@@ -770,14 +651,14 @@ static int idefloppy_open(struct inode *inode, struct file *filp)
ide_drive_t *drive;
int ret = 0;
- debug_log("Reached %s\n", __func__);
-
floppy = ide_floppy_get(disk);
if (!floppy)
return -ENXIO;
drive = floppy->drive;
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
+
floppy->openers++;
if (floppy->openers == 1) {
@@ -822,10 +703,10 @@ out_put_floppy:
static int idefloppy_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
- debug_log("Reached %s\n", __func__);
+ ide_debug_log(IDE_DBG_FUNC, "Call %s\n", __func__);
if (floppy->openers == 1) {
ide_set_media_lock(drive, disk, 0);
@@ -841,7 +722,8 @@ static int idefloppy_release(struct inode *inode, struct file *filp)
static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
- struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
+ ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
geo->heads = drive->bios_head;
@@ -850,64 +732,15 @@ static int idefloppy_getgeo(struct block_device *bdev, struct hd_geometry *geo)
return 0;
}
-static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned long arg, unsigned int cmd)
-{
- idefloppy_floppy_t *floppy = drive->driver_data;
- struct gendisk *disk = floppy->disk;
- int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
-
- if (floppy->openers > 1)
- return -EBUSY;
-
- ide_set_media_lock(drive, disk, prevent);
-
- if (cmd == CDROMEJECT)
- ide_do_start_stop(drive, disk, 2);
-
- return 0;
-}
-
-static int idefloppy_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- struct block_device *bdev = inode->i_bdev;
- struct ide_floppy_obj *floppy = ide_floppy_g(bdev->bd_disk);
- ide_drive_t *drive = floppy->drive;
- struct ide_atapi_pc pc;
- void __user *argp = (void __user *)arg;
- int err;
-
- if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
- return ide_floppy_lockdoor(drive, &pc, arg, cmd);
-
- err = ide_floppy_format_ioctl(drive, file, cmd, argp);
- if (err != -ENOTTY)
- return err;
-
- /*
- * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
- * and CDROM_SEND_PACKET (legacy) ioctls
- */
- if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
- err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
- bdev->bd_disk, cmd, argp);
-
- if (err == -ENOTTY)
- err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
-
- return err;
-}
-
static int idefloppy_media_changed(struct gendisk *disk)
{
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
+ struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
ide_drive_t *drive = floppy->drive;
int ret;
/* do not scan partitions twice if this is a removable device */
- if (drive->attach) {
- drive->attach = 0;
+ if (drive->dev_flags & IDE_DFLAG_ATTACH) {
+ drive->dev_flags &= ~IDE_DFLAG_ATTACH;
return 0;
}
ret = !!(drive->atapi_flags & IDE_AFLAG_MEDIA_CHANGED);
@@ -917,8 +750,8 @@ static int idefloppy_media_changed(struct gendisk *disk)
static int idefloppy_revalidate_disk(struct gendisk *disk)
{
- struct ide_floppy_obj *floppy = ide_floppy_g(disk);
- set_capacity(disk, idefloppy_capacity(floppy->drive));
+ struct ide_floppy_obj *floppy = ide_drv_g(disk, ide_floppy_obj);
+ set_capacity(disk, ide_floppy_capacity(floppy->drive));
return 0;
}
@@ -926,7 +759,7 @@ static struct block_device_operations idefloppy_ops = {
.owner = THIS_MODULE,
.open = idefloppy_open,
.release = idefloppy_release,
- .ioctl = idefloppy_ioctl,
+ .ioctl = ide_floppy_ioctl,
.getgeo = idefloppy_getgeo,
.media_changed = idefloppy_media_changed,
.revalidate_disk = idefloppy_revalidate_disk
@@ -944,14 +777,14 @@ static int ide_floppy_probe(ide_drive_t *drive)
goto failed;
if (!ide_check_atapi_device(drive, DRV_NAME)) {
- printk(KERN_ERR "ide-floppy: %s: not supported by this version"
- " of ide-floppy\n", drive->name);
+ printk(KERN_ERR PFX "%s: not supported by this version of "
+ DRV_NAME "\n", drive->name);
goto failed;
}
floppy = kzalloc(sizeof(idefloppy_floppy_t), GFP_KERNEL);
if (!floppy) {
- printk(KERN_ERR "ide-floppy: %s: Can't allocate a floppy"
- " structure\n", drive->name);
+ printk(KERN_ERR PFX "%s: Can't allocate a floppy structure\n",
+ drive->name);
goto failed;
}
@@ -971,13 +804,16 @@ static int ide_floppy_probe(ide_drive_t *drive)
drive->driver_data = floppy;
+ drive->debug_mask = debug_mask;
+
idefloppy_setup(drive, floppy);
+ drive->dev_flags |= IDE_DFLAG_ATTACH;
g->minors = 1 << PARTN_BITS;
g->driverfs_dev = &drive->gendev;
- g->flags = drive->removable ? GENHD_FL_REMOVABLE : 0;
+ if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
+ g->flags = GENHD_FL_REMOVABLE;
g->fops = &idefloppy_ops;
- drive->attach = 1;
add_disk(g);
return 0;
@@ -994,7 +830,7 @@ static void __exit idefloppy_exit(void)
static int __init idefloppy_init(void)
{
- printk("ide-floppy driver " IDEFLOPPY_VERSION "\n");
+ printk(KERN_INFO DRV_NAME " driver " IDEFLOPPY_VERSION "\n");
return driver_register(&idefloppy_driver.gen_driver);
}
diff --git a/drivers/ide/ide-floppy.h b/drivers/ide/ide-floppy.h
index ecadc2bc322d..17cf865e583d 100644
--- a/drivers/ide/ide-floppy.h
+++ b/drivers/ide/ide-floppy.h
@@ -13,20 +13,14 @@ typedef struct ide_floppy_obj {
struct kref kref;
unsigned int openers; /* protected by BKL for now */
- /* Current packet command */
- struct ide_atapi_pc *pc;
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
/* used for blk_{fs,pc}_request() requests */
struct ide_atapi_pc queued_pc;
- struct ide_atapi_pc request_sense_pc;
- struct request request_sense_rq;
-
/* Last error information */
u8 sense_key, asc, ascq;
- /* delay this long before sending packet command */
- u8 ticks;
+
int progress_indication;
/* Device information */
@@ -54,10 +48,15 @@ typedef struct ide_floppy_obj {
/* ide-floppy.c */
void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *, u8);
void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *);
-void ide_floppy_create_request_sense_cmd(struct ide_atapi_pc *);
+sector_t ide_floppy_capacity(ide_drive_t *);
/* ide-floppy_ioctl.c */
-int ide_floppy_format_ioctl(ide_drive_t *, struct file *, unsigned int,
- void __user *);
+int ide_floppy_ioctl(struct inode *, struct file *, unsigned, unsigned long);
+
+#ifdef CONFIG_IDE_PROC_FS
+/* ide-floppy_proc.c */
+extern ide_proc_entry_t ide_floppy_proc[];
+extern const struct ide_proc_devset ide_floppy_settings[];
+#endif
#endif /*__IDE_FLOPPY_H */
diff --git a/drivers/ide/ide-floppy_ioctl.c b/drivers/ide/ide-floppy_ioctl.c
index 5ffc4512d14b..a3a7a0809e2b 100644
--- a/drivers/ide/ide-floppy_ioctl.c
+++ b/drivers/ide/ide-floppy_ioctl.c
@@ -195,7 +195,7 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
int progress_indication = 0x10000;
if (drive->atapi_flags & IDE_AFLAG_SRFP) {
- ide_floppy_create_request_sense_cmd(&pc);
+ ide_create_request_sense_cmd(drive, &pc);
if (ide_queue_pc_tail(drive, floppy->disk, &pc))
return -EIO;
@@ -223,8 +223,26 @@ static int ide_floppy_get_format_progress(ide_drive_t *drive, int __user *arg)
return 0;
}
-int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
- unsigned int cmd, void __user *argp)
+static int ide_floppy_lockdoor(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ unsigned long arg, unsigned int cmd)
+{
+ idefloppy_floppy_t *floppy = drive->driver_data;
+ struct gendisk *disk = floppy->disk;
+ int prevent = (arg && cmd != CDROMEJECT) ? 1 : 0;
+
+ if (floppy->openers > 1)
+ return -EBUSY;
+
+ ide_set_media_lock(drive, disk, prevent);
+
+ if (cmd == CDROMEJECT)
+ ide_do_start_stop(drive, disk, 2);
+
+ return 0;
+}
+
+static int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
+ unsigned int cmd, void __user *argp)
{
switch (cmd) {
case IDEFLOPPY_IOCTL_FORMAT_SUPPORTED:
@@ -241,3 +259,35 @@ int ide_floppy_format_ioctl(ide_drive_t *drive, struct file *file,
return -ENOTTY;
}
}
+
+int ide_floppy_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct block_device *bdev = inode->i_bdev;
+ struct ide_floppy_obj *floppy = ide_drv_g(bdev->bd_disk,
+ ide_floppy_obj);
+ ide_drive_t *drive = floppy->drive;
+ struct ide_atapi_pc pc;
+ void __user *argp = (void __user *)arg;
+ int err;
+
+ if (cmd == CDROMEJECT || cmd == CDROM_LOCKDOOR)
+ return ide_floppy_lockdoor(drive, &pc, arg, cmd);
+
+ err = ide_floppy_format_ioctl(drive, file, cmd, argp);
+ if (err != -ENOTTY)
+ return err;
+
+ /*
+ * skip SCSI_IOCTL_SEND_COMMAND (deprecated)
+ * and CDROM_SEND_PACKET (legacy) ioctls
+ */
+ if (cmd != CDROM_SEND_PACKET && cmd != SCSI_IOCTL_SEND_COMMAND)
+ err = scsi_cmd_ioctl(file, bdev->bd_disk->queue,
+ bdev->bd_disk, cmd, argp);
+
+ if (err == -ENOTTY)
+ err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
+
+ return err;
+}
diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c
new file mode 100644
index 000000000000..76f0c6c4eca3
--- /dev/null
+++ b/drivers/ide/ide-floppy_proc.c
@@ -0,0 +1,33 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+
+#include "ide-floppy.h"
+
+static int proc_idefloppy_read_capacity(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ ide_drive_t*drive = (ide_drive_t *)data;
+ int len;
+
+ len = sprintf(page, "%llu\n", (long long)ide_floppy_capacity(drive));
+ PROC_IDE_READ_RETURN(page, start, off, count, eof, len);
+}
+
+ide_proc_entry_t ide_floppy_proc[] = {
+ { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL },
+ { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL },
+ { NULL, 0, NULL, NULL }
+};
+
+ide_devset_rw_field(bios_cyl, bios_cyl);
+ide_devset_rw_field(bios_head, bios_head);
+ide_devset_rw_field(bios_sect, bios_sect);
+ide_devset_rw_field(ticks, pc_delay);
+
+const struct ide_proc_devset ide_floppy_settings[] = {
+ IDE_PROC_DEVSET(bios_cyl, 0, 1023),
+ IDE_PROC_DEVSET(bios_head, 0, 255),
+ IDE_PROC_DEVSET(bios_sect, 0, 63),
+ IDE_PROC_DEVSET(ticks, 0, 255),
+ { 0 },
+};
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 0a3cb0c33ae5..81a5282ce1eb 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -137,15 +137,10 @@ static void ide_generic_check_pci_legacy_iobases(int *primary, int *secondary)
static int __init ide_generic_init(void)
{
- hw_regs_t hw[MAX_HWIFS], *hws[MAX_HWIFS];
- struct ide_host *host;
+ hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
unsigned long io_addr;
- int i, rc, primary = 0, secondary = 0;
+ int i, rc = 0, primary = 0, secondary = 0;
-#ifdef CONFIG_MIPS
- if (!ide_probe_legacy())
- return -ENODEV;
-#endif
ide_generic_check_pci_legacy_iobases(&primary, &secondary);
if (!probe_mask) {
@@ -161,13 +156,9 @@ static int __init ide_generic_init(void)
printk(KERN_INFO DRV_NAME ": enforcing probing of I/O ports "
"upon user request\n");
- memset(hws, 0, sizeof(hw_regs_t *) * MAX_HWIFS);
-
for (i = 0; i < ARRAY_SIZE(legacy_bases); i++) {
io_addr = legacy_bases[i];
- hws[i] = NULL;
-
if ((probe_mask & (1 << i)) && io_addr) {
if (!request_region(io_addr, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX "
@@ -184,45 +175,27 @@ static int __init ide_generic_init(void)
continue;
}
- memset(&hw[i], 0, sizeof(hw[i]));
- ide_std_init_ports(&hw[i], io_addr, io_addr + 0x206);
+ memset(&hw, 0, sizeof(hw));
+ ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
#ifdef CONFIG_IA64
- hw[i].irq = isa_irq_to_vector(legacy_irqs[i]);
+ hw.irq = isa_irq_to_vector(legacy_irqs[i]);
#else
- hw[i].irq = legacy_irqs[i];
+ hw.irq = legacy_irqs[i];
#endif
- hw[i].chipset = ide_generic;
+ hw.chipset = ide_generic;
- hws[i] = &hw[i];
+ rc = ide_host_add(NULL, hws, NULL);
+ if (rc) {
+ release_region(io_addr + 0x206, 1);
+ release_region(io_addr, 8);
+ }
}
}
- host = ide_host_alloc_all(NULL, hws);
- if (host == NULL) {
- rc = -ENOMEM;
- goto err;
- }
-
- rc = ide_host_register(host, NULL, hws);
- if (rc)
- goto err_free;
-
if (ide_generic_sysfs_init())
printk(KERN_ERR DRV_NAME ": failed to create ide_generic "
"class\n");
- return 0;
-err_free:
- ide_host_free(host);
-err:
- for (i = 0; i < MAX_HWIFS; i++) {
- if (hws[i] == NULL)
- continue;
-
- io_addr = hws[i]->io_ports.data_addr;
- release_region(io_addr + 0x206, 1);
- release_region(io_addr, 8);
- }
return rc;
}
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 1c51949833be..77c6eaeacefa 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -78,8 +78,9 @@ static int __ide_end_request(ide_drive_t *drive, struct request *rq,
* decide whether to reenable DMA -- 3 is a random magic for now,
* if we DMA timeout more than 3 times, just stay in PIO
*/
- if (drive->state == DMA_PIO_RETRY && drive->retry_pio <= 3) {
- drive->state = 0;
+ if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) &&
+ drive->retry_pio <= 3) {
+ drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY;
ide_dma_on(drive);
}
@@ -131,21 +132,6 @@ int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
}
EXPORT_SYMBOL(ide_end_request);
-/*
- * Power Management state machine. This one is rather trivial for now,
- * we should probably add more, like switching back to PIO on suspend
- * to help some BIOSes, re-do the door locking on resume, etc...
- */
-
-enum {
- ide_pm_flush_cache = ide_pm_state_start_suspend,
- idedisk_pm_standby,
-
- idedisk_pm_restore_pio = ide_pm_state_start_resume,
- idedisk_pm_idle,
- ide_pm_restore_dma,
-};
-
static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 stat, u8 error)
{
struct request_pm_state *pm = rq->data;
@@ -154,20 +140,20 @@ static void ide_complete_power_step(ide_drive_t *drive, struct request *rq, u8 s
return;
switch (pm->pm_step) {
- case ide_pm_flush_cache: /* Suspend step 1 (flush cache) complete */
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
if (pm->pm_state == PM_EVENT_FREEZE)
- pm->pm_step = ide_pm_state_completed;
+ pm->pm_step = IDE_PM_COMPLETED;
else
- pm->pm_step = idedisk_pm_standby;
+ pm->pm_step = IDE_PM_STANDBY;
break;
- case idedisk_pm_standby: /* Suspend step 2 (standby) complete */
- pm->pm_step = ide_pm_state_completed;
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
+ pm->pm_step = IDE_PM_COMPLETED;
break;
- case idedisk_pm_restore_pio: /* Resume step 1 complete */
- pm->pm_step = idedisk_pm_idle;
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
+ pm->pm_step = IDE_PM_IDLE;
break;
- case idedisk_pm_idle: /* Resume step 2 (idle) complete */
- pm->pm_step = ide_pm_restore_dma;
+ case IDE_PM_IDLE: /* Resume step 2 (idle)*/
+ pm->pm_step = IDE_PM_RESTORE_DMA;
break;
}
}
@@ -180,11 +166,12 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
memset(args, 0, sizeof(*args));
switch (pm->pm_step) {
- case ide_pm_flush_cache: /* Suspend step 1 (flush cache) */
+ case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
if (drive->media != ide_disk)
break;
/* Not supported? Switch to next step now. */
- if (!drive->wcache || ata_id_flush_enabled(drive->id) == 0) {
+ if (ata_id_flush_enabled(drive->id) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
ide_complete_power_step(drive, rq, 0, 0);
return ide_stopped;
}
@@ -193,27 +180,23 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
else
args->tf.command = ATA_CMD_FLUSH;
goto out_do_tf;
-
- case idedisk_pm_standby: /* Suspend step 2 (standby) */
+ case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
args->tf.command = ATA_CMD_STANDBYNOW1;
goto out_do_tf;
-
- case idedisk_pm_restore_pio: /* Resume step 1 (restore PIO) */
+ case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
ide_set_max_pio(drive);
/*
- * skip idedisk_pm_idle for ATAPI devices
+ * skip IDE_PM_IDLE for ATAPI devices
*/
if (drive->media != ide_disk)
- pm->pm_step = ide_pm_restore_dma;
+ pm->pm_step = IDE_PM_RESTORE_DMA;
else
ide_complete_power_step(drive, rq, 0, 0);
return ide_stopped;
-
- case idedisk_pm_idle: /* Resume step 2 (idle) */
+ case IDE_PM_IDLE: /* Resume step 2 (idle) */
args->tf.command = ATA_CMD_IDLEIMMEDIATE;
goto out_do_tf;
-
- case ide_pm_restore_dma: /* Resume step 3 (restore DMA) */
+ case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
/*
* Right now, all we do is call ide_set_dma(drive),
* we could be smarter and check for current xfer_speed
@@ -222,12 +205,13 @@ static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *
if (drive->hwif->dma_ops == NULL)
break;
/*
- * TODO: respect ->using_dma setting
+ * TODO: respect IDE_DFLAG_USING_DMA
*/
ide_set_dma(drive);
break;
}
- pm->pm_step = ide_pm_state_completed;
+
+ pm->pm_step = IDE_PM_COMPLETED;
return ide_stopped;
out_do_tf:
@@ -287,7 +271,7 @@ static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq)
if (blk_pm_suspend_request(rq)) {
blk_stop_queue(drive->queue);
} else {
- drive->blocked = 0;
+ drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
blk_start_queue(drive->queue);
}
HWGROUP(drive)->rq = NULL;
@@ -343,7 +327,7 @@ void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
drive->name, rq->pm->pm_step, stat, err);
#endif
ide_complete_power_step(drive, rq, stat, err);
- if (pm->pm_step == ide_pm_state_completed)
+ if (pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return;
}
@@ -374,13 +358,14 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8
{
ide_hwif_t *hwif = drive->hwif;
- if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) ||
+ ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
if (err == ATA_ABORTED) {
- if (drive->select.b.lba &&
+ if ((drive->dev_flags & IDE_DFLAG_LBA) &&
/* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
return ide_stopped;
@@ -428,7 +413,8 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u
{
ide_hwif_t *hwif = drive->hwif;
- if ((stat & ATA_BUSY) || ((stat & ATA_DF) && !drive->nowerr)) {
+ if ((stat & ATA_BUSY) ||
+ ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else {
@@ -509,7 +495,7 @@ static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
tf->lbal = drive->sect;
tf->lbam = drive->cyl;
tf->lbah = drive->cyl >> 8;
- tf->device = ((drive->head - 1) | drive->select.all) & ~ATA_LBA;
+ tf->device = (drive->head - 1) | drive->select;
tf->command = ATA_CMD_INIT_DEV_PARAMS;
}
@@ -557,30 +543,6 @@ static ide_startstop_t ide_disk_special(ide_drive_t *drive)
return ide_started;
}
-/*
- * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
- */
-static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
-{
- switch (req_pio) {
- case 202:
- case 201:
- case 200:
- case 102:
- case 101:
- case 100:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
- case 9:
- case 8:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
- case 7:
- case 6:
- return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
- default:
- return 0;
- }
-}
-
/**
* do_special - issue some special commands
* @drive: drive the command is for
@@ -598,45 +560,12 @@ static ide_startstop_t do_special (ide_drive_t *drive)
#ifdef DEBUG
printk("%s: do_special: 0x%02x\n", drive->name, s->all);
#endif
- if (s->b.set_tune) {
- ide_hwif_t *hwif = drive->hwif;
- const struct ide_port_ops *port_ops = hwif->port_ops;
- u8 req_pio = drive->tune_req;
-
- s->b.set_tune = 0;
-
- if (set_pio_mode_abuse(drive->hwif, req_pio)) {
- /*
- * take ide_lock for drive->[no_]unmask/[no_]io_32bit
- */
- if (req_pio == 8 || req_pio == 9) {
- unsigned long flags;
-
- spin_lock_irqsave(&ide_lock, flags);
- port_ops->set_pio_mode(drive, req_pio);
- spin_unlock_irqrestore(&ide_lock, flags);
- } else
- port_ops->set_pio_mode(drive, req_pio);
- } else {
- int keep_dma = drive->using_dma;
-
- ide_set_pio(drive, req_pio);
-
- if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
- if (keep_dma)
- ide_dma_on(drive);
- }
- }
-
- return ide_stopped;
- } else {
- if (drive->media == ide_disk)
- return ide_disk_special(drive);
+ if (drive->media == ide_disk)
+ return ide_disk_special(drive);
- s->all = 0;
- drive->mult_req = 0;
- return ide_stopped;
- }
+ s->all = 0;
+ drive->mult_req = 0;
+ return ide_stopped;
}
void ide_map_sg(ide_drive_t *drive, struct request *rq)
@@ -726,10 +655,7 @@ int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting,
if (!(setting->flags & DS_SYNC))
return setting->set(drive, arg);
- rq = blk_get_request(q, READ, GFP_KERNEL);
- if (!rq)
- return -ENOMEM;
-
+ rq = blk_get_request(q, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd_len = 5;
rq->cmd[0] = REQ_DEVSET_EXEC;
@@ -746,7 +672,32 @@ EXPORT_SYMBOL_GPL(ide_devset_execute);
static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
{
- switch (rq->cmd[0]) {
+ u8 cmd = rq->cmd[0];
+
+ if (cmd == REQ_PARK_HEADS || cmd == REQ_UNPARK_HEADS) {
+ ide_task_t task;
+ struct ide_taskfile *tf = &task.tf;
+
+ memset(&task, 0, sizeof(task));
+ if (cmd == REQ_PARK_HEADS) {
+ drive->sleep = *(unsigned long *)rq->special;
+ drive->dev_flags |= IDE_DFLAG_SLEEPING;
+ tf->command = ATA_CMD_IDLEIMMEDIATE;
+ tf->feature = 0x44;
+ tf->lbal = 0x4c;
+ tf->lbam = 0x4e;
+ tf->lbah = 0x55;
+ task.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER;
+ } else /* cmd == REQ_UNPARK_HEADS */
+ tf->command = ATA_CMD_CHK_POWER;
+
+ task.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
+ task.rq = rq;
+ drive->hwif->data_phase = task.data_phase = TASKFILE_NO_DATA;
+ return do_rw_taskfile(drive, &task);
+ }
+
+ switch (cmd) {
case REQ_DEVSET_EXEC:
{
int err, (*setfunc)(ide_drive_t *, int) = rq->special;
@@ -773,11 +724,11 @@ static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
struct request_pm_state *pm = rq->data;
if (blk_pm_suspend_request(rq) &&
- pm->pm_step == ide_pm_state_start_suspend)
+ pm->pm_step == IDE_PM_START_SUSPEND)
/* Mark drive blocked when starting the suspend sequence. */
- drive->blocked = 1;
+ drive->dev_flags |= IDE_DFLAG_BLOCKED;
else if (blk_pm_resume_request(rq) &&
- pm->pm_step == ide_pm_state_start_resume) {
+ pm->pm_step == IDE_PM_START_RESUME) {
/*
* The first thing we do on wakeup is to wait for BSY bit to
* go away (with a looong timeout) as a drive on this hwif may
@@ -857,7 +808,7 @@ static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
#endif
startstop = ide_start_power_step(drive, rq);
if (startstop == ide_stopped &&
- pm->pm_step == ide_pm_state_completed)
+ pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return startstop;
} else if (!rq->rq_disk && blk_special_request(rq))
@@ -895,7 +846,7 @@ void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
if (timeout > WAIT_WORSTCASE)
timeout = WAIT_WORSTCASE;
drive->sleep = timeout + jiffies;
- drive->sleeping = 1;
+ drive->dev_flags |= IDE_DFLAG_SLEEPING;
}
EXPORT_SYMBOL(ide_stall_queue);
@@ -935,18 +886,23 @@ repeat:
}
do {
- if ((!drive->sleeping || time_after_eq(jiffies, drive->sleep))
- && !elv_queue_empty(drive->queue)) {
- if (!best
- || (drive->sleeping && (!best->sleeping || time_before(drive->sleep, best->sleep)))
- || (!best->sleeping && time_before(WAKEUP(drive), WAKEUP(best))))
- {
+ u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
+ u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));
+
+ if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
+ !elv_queue_empty(drive->queue)) {
+ if (best == NULL ||
+ (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
+ (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
if (!blk_queue_plugged(drive->queue))
best = drive;
}
}
} while ((drive = drive->next) != hwgroup->drive);
- if (best && best->nice1 && !best->sleeping && best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
+
+ if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
+ (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
+ best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
long t = (signed long)(WAKEUP(best) - jiffies);
if (t >= WAIT_MIN_SLEEP) {
/*
@@ -955,7 +911,7 @@ repeat:
*/
drive = best->next;
do {
- if (!drive->sleeping
+ if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
&& time_before(jiffies - best->service_time, WAKEUP(drive))
&& time_before(WAKEUP(drive), jiffies + t))
{
@@ -1026,7 +982,9 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
hwgroup->rq = NULL;
drive = hwgroup->drive;
do {
- if (drive->sleeping && (!sleeping || time_before(drive->sleep, sleep))) {
+ if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
+ (sleeping == 0 ||
+ time_before(drive->sleep, sleep))) {
sleeping = 1;
sleep = drive->sleep;
}
@@ -1075,7 +1033,7 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
}
hwgroup->hwif = hwif;
hwgroup->drive = drive;
- drive->sleeping = 0;
+ drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
drive->service_start = jiffies;
if (blk_queue_plugged(drive->queue)) {
@@ -1109,7 +1067,9 @@ static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
* We count how many times we loop here to make sure we service
* all drives in the hwgroup without looping for ever
*/
- if (drive->blocked && !blk_pm_request(rq) && !(rq->cmd_flags & REQ_PREEMPT)) {
+ if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
+ blk_pm_request(rq) == 0 &&
+ (rq->cmd_flags & REQ_PREEMPT) == 0) {
drive = drive->next ? drive->next : hwgroup->drive;
if (loops++ < 4 && !blk_queue_plugged(drive->queue))
goto again;
@@ -1182,8 +1142,8 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
* a timeout -- we'll reenable after we finish this next request
* (or rather the first chunk of it) in pio.
*/
+ drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY;
drive->retry_pio++;
- drive->state = DMA_PIO_RETRY;
ide_dma_off_quietly(drive);
/*
@@ -1480,23 +1440,16 @@ irqreturn_t ide_intr (int irq, void *dev_id)
del_timer(&hwgroup->timer);
spin_unlock(&ide_lock);
- /* Some controllers might set DMA INTR no matter DMA or PIO;
- * bmdma status might need to be cleared even for
- * PIO interrupts to prevent spurious/lost irq.
- */
- if (hwif->ide_dma_clear_irq && !(drive->waiting_for_dma))
- /* ide_dma_end() needs bmdma status for error checking.
- * So, skip clearing bmdma status here and leave it
- * to ide_dma_end() if this is dma interrupt.
- */
- hwif->ide_dma_clear_irq(drive);
+ if (hwif->port_ops && hwif->port_ops->clear_irq)
+ hwif->port_ops->clear_irq(drive);
- if (drive->unmask)
+ if (drive->dev_flags & IDE_DFLAG_UNMASK)
local_irq_enable_in_hardirq();
+
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive);
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&ide_lock);
/*
* Note that handler() may have set things up for another
* interrupt to occur soon, but it cannot happen until
diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c
index cf01564901af..a90945f49792 100644
--- a/drivers/ide/ide-ioctls.c
+++ b/drivers/ide/ide-ioctls.c
@@ -62,7 +62,7 @@ static int ide_get_identity_ioctl(ide_drive_t *drive, unsigned int cmd,
int size = (cmd == HDIO_GET_IDENTITY) ? (ATA_ID_WORDS * 2) : 142;
int rc = 0;
- if (drive->id_read == 0) {
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
rc = -ENOMSG;
goto out;
}
@@ -86,8 +86,10 @@ out:
static int ide_get_nice_ioctl(ide_drive_t *drive, unsigned long arg)
{
- return put_user((drive->dsc_overlap << IDE_NICE_DSC_OVERLAP) |
- (drive->nice1 << IDE_NICE_1), (long __user *)arg);
+ return put_user((!!(drive->dev_flags & IDE_DFLAG_DSC_OVERLAP)
+ << IDE_NICE_DSC_OVERLAP) |
+ (!!(drive->dev_flags & IDE_DFLAG_NICE1)
+ << IDE_NICE_1), (long __user *)arg);
}
static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg)
@@ -97,11 +99,18 @@ static int ide_set_nice_ioctl(ide_drive_t *drive, unsigned long arg)
if (((arg >> IDE_NICE_DSC_OVERLAP) & 1) &&
(drive->media == ide_disk || drive->media == ide_floppy ||
- drive->scsi))
+ (drive->dev_flags & IDE_DFLAG_SCSI)))
return -EPERM;
- drive->dsc_overlap = (arg >> IDE_NICE_DSC_OVERLAP) & 1;
- drive->nice1 = (arg >> IDE_NICE_1) & 1;
+ if ((arg >> IDE_NICE_DSC_OVERLAP) & 1)
+ drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
+
+ if ((arg >> IDE_NICE_1) & 1)
+ drive->dev_flags |= IDE_DFLAG_NICE1;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_NICE1;
return 0;
}
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 0a2fd3b37ac4..b762deb2dacb 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -181,7 +181,7 @@ void ide_tf_load(ide_drive_t *drive, ide_task_t *task)
tf_outb(tf->lbah, io_ports->lbah_addr);
if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- tf_outb((tf->device & HIHI) | drive->select.all,
+ tf_outb((tf->device & HIHI) | drive->select,
io_ports->device_addr);
}
EXPORT_SYMBOL_GPL(ide_tf_load);
@@ -647,7 +647,7 @@ u8 eighty_ninty_three (ide_drive_t *drive)
return 1;
no_80w:
- if (drive->udma33_warned == 1)
+ if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
return 0;
printk(KERN_WARNING "%s: %s side 80-wire cable detection failed, "
@@ -655,7 +655,7 @@ no_80w:
drive->name,
hwif->cbl == ATA_CBL_PATA80 ? "drive" : "host");
- drive->udma33_warned = 1;
+ drive->dev_flags |= IDE_DFLAG_UDMA33_WARNED;
return 0;
}
@@ -711,7 +711,7 @@ int ide_driveid_update(ide_drive_t *drive)
kfree(id);
- if (drive->using_dma && ide_id_dma_bug(drive))
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) && ide_id_dma_bug(drive))
ide_dma_off(drive);
return 1;
@@ -790,7 +790,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
skip:
#ifdef CONFIG_BLK_DEV_IDEDMA
- if (speed >= XFER_SW_DMA_0 && drive->using_dma)
+ if (speed >= XFER_SW_DMA_0 && (drive->dev_flags & IDE_DFLAG_USING_DMA))
hwif->dma_ops->dma_host_set(drive, 1);
else if (hwif->dma_ops) /* check if host supports DMA */
ide_dma_off_quietly(drive);
@@ -940,6 +940,25 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive)
return ide_stopped;
}
+static void ide_reset_report_error(ide_hwif_t *hwif, u8 err)
+{
+ static const char *err_master_vals[] =
+ { NULL, "passed", "formatter device error",
+ "sector buffer error", "ECC circuitry error",
+ "controlling MPU error" };
+
+ u8 err_master = err & 0x7f;
+
+ printk(KERN_ERR "%s: reset: master: ", hwif->name);
+ if (err_master && err_master < 6)
+ printk(KERN_CONT "%s", err_master_vals[err_master]);
+ else
+ printk(KERN_CONT "error (0x%02x?)", err);
+ if (err & 0x80)
+ printk(KERN_CONT "; slave: failed");
+ printk(KERN_CONT "\n");
+}
+
/*
* reset_pollfunc() gets invoked to poll the interface for completion every 50ms
* during an ide reset operation. If the drives have not yet responded,
@@ -975,31 +994,14 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
drive->failures++;
err = -EIO;
} else {
- printk("%s: reset: ", hwif->name);
tmp = ide_read_error(drive);
if (tmp == 1) {
- printk("success\n");
+ printk(KERN_INFO "%s: reset: success\n", hwif->name);
drive->failures = 0;
} else {
+ ide_reset_report_error(hwif, tmp);
drive->failures++;
- printk("master: ");
- switch (tmp & 0x7f) {
- case 1: printk("passed");
- break;
- case 2: printk("formatter device error");
- break;
- case 3: printk("sector buffer error");
- break;
- case 4: printk("ECC circuitry error");
- break;
- case 5: printk("controlling MPU error");
- break;
- default:printk("error (0x%02x?)", tmp);
- }
- if (tmp & 0x80)
- printk("; slave: failed");
- printk("\n");
err = -EIO;
}
}
@@ -1016,9 +1018,14 @@ static void ide_disk_pre_reset(ide_drive_t *drive)
drive->special.all = 0;
drive->special.b.set_geometry = legacy;
drive->special.b.recalibrate = legacy;
+
drive->mult_count = 0;
- if (!drive->keep_settings && !drive->using_dma)
+ drive->dev_flags &= ~IDE_DFLAG_PARKED;
+
+ if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0 &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA) == 0)
drive->mult_req = 0;
+
if (drive->mult_req != drive->mult_count)
drive->special.b.set_multmode = 1;
}
@@ -1030,18 +1037,18 @@ static void pre_reset(ide_drive_t *drive)
if (drive->media == ide_disk)
ide_disk_pre_reset(drive);
else
- drive->post_reset = 1;
+ drive->dev_flags |= IDE_DFLAG_POST_RESET;
- if (drive->using_dma) {
+ if (drive->dev_flags & IDE_DFLAG_USING_DMA) {
if (drive->crc_count)
ide_check_dma_crc(drive);
else
ide_dma_off(drive);
}
- if (!drive->keep_settings) {
- if (!drive->using_dma) {
- drive->unmask = 0;
+ if ((drive->dev_flags & IDE_DFLAG_KEEP_SETTINGS) == 0) {
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0) {
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;
drive->io_32bit = 0;
}
return;
@@ -1073,12 +1080,13 @@ static void pre_reset(ide_drive_t *drive)
static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
{
unsigned int unit;
- unsigned long flags;
+ unsigned long flags, timeout;
ide_hwif_t *hwif;
ide_hwgroup_t *hwgroup;
struct ide_io_ports *io_ports;
const struct ide_tp_ops *tp_ops;
const struct ide_port_ops *port_ops;
+ DEFINE_WAIT(wait);
spin_lock_irqsave(&ide_lock, flags);
hwif = HWIF(drive);
@@ -1105,6 +1113,31 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi)
return ide_started;
}
+ /* We must not disturb devices in the IDE_DFLAG_PARKED state. */
+ do {
+ unsigned long now;
+
+ prepare_to_wait(&ide_park_wq, &wait, TASK_UNINTERRUPTIBLE);
+ timeout = jiffies;
+ for (unit = 0; unit < MAX_DRIVES; unit++) {
+ ide_drive_t *tdrive = &hwif->drives[unit];
+
+ if (tdrive->dev_flags & IDE_DFLAG_PRESENT &&
+ tdrive->dev_flags & IDE_DFLAG_PARKED &&
+ time_after(tdrive->sleep, timeout))
+ timeout = tdrive->sleep;
+ }
+
+ now = jiffies;
+ if (time_before_eq(timeout, now))
+ break;
+
+ spin_unlock_irqrestore(&ide_lock, flags);
+ timeout = schedule_timeout_uninterruptible(timeout - now);
+ spin_lock_irqsave(&ide_lock, flags);
+ } while (timeout);
+ finish_wait(&ide_park_wq, &wait);
+
/*
* First, reset any device state data we were maintaining
* for any of the drives on this interface.
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index ed426dd0fdd8..9fc4cfb2a272 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -317,7 +317,7 @@ static void ide_dump_sector(ide_drive_t *drive)
{
ide_task_t task;
struct ide_taskfile *tf = &task.tf;
- int lba48 = (drive->addressing == 1) ? 1 : 0;
+ u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
memset(&task, 0, sizeof(task));
if (lba48)
diff --git a/drivers/ide/ide-park.c b/drivers/ide/ide-park.c
new file mode 100644
index 000000000000..03b00e57e93f
--- /dev/null
+++ b/drivers/ide/ide-park.c
@@ -0,0 +1,121 @@
+#include <linux/kernel.h>
+#include <linux/ide.h>
+#include <linux/jiffies.h>
+#include <linux/blkdev.h>
+
+DECLARE_WAIT_QUEUE_HEAD(ide_park_wq);
+
+static void issue_park_cmd(ide_drive_t *drive, unsigned long timeout)
+{
+ struct request_queue *q = drive->queue;
+ struct request *rq;
+ int rc;
+
+ timeout += jiffies;
+ spin_lock_irq(&ide_lock);
+ if (drive->dev_flags & IDE_DFLAG_PARKED) {
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
+ int reset_timer;
+
+ reset_timer = time_before(timeout, drive->sleep);
+ drive->sleep = timeout;
+ wake_up_all(&ide_park_wq);
+ if (reset_timer && hwgroup->sleeping &&
+ del_timer(&hwgroup->timer)) {
+ hwgroup->sleeping = 0;
+ hwgroup->busy = 0;
+ blk_start_queueing(q);
+ }
+ spin_unlock_irq(&ide_lock);
+ return;
+ }
+ spin_unlock_irq(&ide_lock);
+
+ rq = blk_get_request(q, READ, __GFP_WAIT);
+ rq->cmd[0] = REQ_PARK_HEADS;
+ rq->cmd_len = 1;
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ rq->special = &timeout;
+ rc = blk_execute_rq(q, NULL, rq, 1);
+ blk_put_request(rq);
+ if (rc)
+ goto out;
+
+ /*
+ * Make sure that *some* command is sent to the drive after the
+ * timeout has expired, so power management will be reenabled.
+ */
+ rq = blk_get_request(q, READ, GFP_NOWAIT);
+ if (unlikely(!rq))
+ goto out;
+
+ rq->cmd[0] = REQ_UNPARK_HEADS;
+ rq->cmd_len = 1;
+ rq->cmd_type = REQ_TYPE_SPECIAL;
+ elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 1);
+
+out:
+ return;
+}
+
+ssize_t ide_park_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ ide_drive_t *drive = to_ide_device(dev);
+ unsigned long now;
+ unsigned int msecs;
+
+ if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD)
+ return -EOPNOTSUPP;
+
+ spin_lock_irq(&ide_lock);
+ now = jiffies;
+ if (drive->dev_flags & IDE_DFLAG_PARKED &&
+ time_after(drive->sleep, now))
+ msecs = jiffies_to_msecs(drive->sleep - now);
+ else
+ msecs = 0;
+ spin_unlock_irq(&ide_lock);
+
+ return snprintf(buf, 20, "%u\n", msecs);
+}
+
+ssize_t ide_park_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+#define MAX_PARK_TIMEOUT 30000
+ ide_drive_t *drive = to_ide_device(dev);
+ long int input;
+ int rc;
+
+ rc = strict_strtol(buf, 10, &input);
+ if (rc || input < -2)
+ return -EINVAL;
+ if (input > MAX_PARK_TIMEOUT) {
+ input = MAX_PARK_TIMEOUT;
+ rc = -EOVERFLOW;
+ }
+
+ mutex_lock(&ide_setting_mtx);
+ if (input >= 0) {
+ if (drive->dev_flags & IDE_DFLAG_NO_UNLOAD)
+ rc = -EOPNOTSUPP;
+ else if (input || drive->dev_flags & IDE_DFLAG_PARKED)
+ issue_park_cmd(drive, msecs_to_jiffies(input));
+ } else {
+ if (drive->media == ide_disk)
+ switch (input) {
+ case -1:
+ drive->dev_flags &= ~IDE_DFLAG_NO_UNLOAD;
+ break;
+ case -2:
+ drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
+ break;
+ }
+ else
+ rc = -EOPNOTSUPP;
+ }
+ mutex_unlock(&ide_setting_mtx);
+
+ return rc ? rc : len;
+}
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 06575a12b635..f27baa5f140e 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -121,7 +121,8 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
/* read 512 bytes of id info */
hwif->tp_ops->input_data(drive, NULL, id, SECTOR_SIZE);
- drive->id_read = 1;
+ drive->dev_flags |= IDE_DFLAG_ID_READ;
+
local_irq_enable();
#ifdef DEBUG
printk(KERN_INFO "%s: dumping identify data\n", drive->name);
@@ -153,8 +154,8 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
printk(KERN_INFO "%s: %s, ", drive->name, m);
- drive->present = 1;
- drive->dead = 0;
+ drive->dev_flags |= IDE_DFLAG_PRESENT;
+ drive->dev_flags &= ~IDE_DFLAG_DEAD;
/*
* Check for an ATAPI device
@@ -172,14 +173,14 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
printk(KERN_CONT "cdrom or floppy?, assuming ");
if (drive->media != ide_cdrom) {
printk(KERN_CONT "FLOPPY");
- drive->removable = 1;
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
break;
}
}
/* Early cdrom models used zero */
type = ide_cdrom;
case ide_cdrom:
- drive->removable = 1;
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
#ifdef CONFIG_PPC
/* kludge for Apple PowerBook internal zip */
if (!strstr(m, "CD-ROM") && strstr(m, "ZIP")) {
@@ -195,7 +196,7 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
break;
case ide_optical:
printk(KERN_CONT "OPTICAL");
- drive->removable = 1;
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
break;
default:
printk(KERN_CONT "UNKNOWN (type %d)", type);
@@ -205,6 +206,10 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
drive->media = type;
/* an ATAPI device ignores DRDY */
drive->ready_stat = 0;
+ if (ata_id_cdb_intr(id))
+ drive->atapi_flags |= IDE_AFLAG_DRQ_INTERRUPT;
+ /* we don't do head unloading on ATAPI devices */
+ drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
return;
}
@@ -216,17 +221,20 @@ static inline void do_identify (ide_drive_t *drive, u8 cmd)
/* CF devices are *not* removable in Linux definition of the term */
if (is_cfa == 0 && (id[ATA_ID_CONFIG] & (1 << 7)))
- drive->removable = 1;
+ drive->dev_flags |= IDE_DFLAG_REMOVABLE;
drive->media = ide_disk;
+ if (!ata_id_has_unload(drive->id))
+ drive->dev_flags |= IDE_DFLAG_NO_UNLOAD;
+
printk(KERN_CONT "%s DISK drive\n", is_cfa ? "CFA" : "ATA");
return;
err_misc:
kfree(id);
- drive->present = 0;
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
return;
}
@@ -426,16 +434,15 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
ide_hwif_t *hwif = HWIF(drive);
const struct ide_tp_ops *tp_ops = hwif->tp_ops;
int rc;
- u8 stat;
+ u8 present = !!(drive->dev_flags & IDE_DFLAG_PRESENT), stat;
+
+ /* avoid waiting for inappropriate probes */
+ if (present && drive->media != ide_disk && cmd == ATA_CMD_ID_ATA)
+ return 4;
- if (drive->present) {
- /* avoid waiting for inappropriate probes */
- if (drive->media != ide_disk && cmd == ATA_CMD_ID_ATA)
- return 4;
- }
#ifdef DEBUG
printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n",
- drive->name, drive->present, drive->media,
+ drive->name, present, drive->media,
(cmd == ATA_CMD_ID_ATA) ? "ATA" : "ATAPI");
#endif
@@ -446,8 +453,8 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
SELECT_DRIVE(drive);
msleep(50);
- if (ide_read_device(drive) != drive->select.all && !drive->present) {
- if (drive->select.b.unit != 0) {
+ if (ide_read_device(drive) != drive->select && present == 0) {
+ if (drive->dn & 1) {
/* exit with drive0 selected */
SELECT_DRIVE(&hwif->drives[0]);
/* allow ATA_BUSY to assert & clear */
@@ -460,7 +467,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
stat = tp_ops->read_status(hwif);
if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) ||
- drive->present || cmd == ATA_CMD_ID_ATAPI) {
+ present || cmd == ATA_CMD_ID_ATAPI) {
/* send cmd and wait */
if ((rc = try_to_identify(drive, cmd))) {
/* failed: try again */
@@ -493,7 +500,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
/* not present or maybe ATAPI */
rc = 3;
}
- if (drive->select.b.unit != 0) {
+ if (drive->dn & 1) {
/* exit with drive0 selected */
SELECT_DRIVE(&hwif->drives[0]);
msleep(50);
@@ -542,8 +549,8 @@ static void enable_nest (ide_drive_t *drive)
* and presents things to the user as needed.
*
* Returns: 0 no device was found
- * 1 device was found (note: drive->present might
- * still be 0)
+ * 1 device was found
+ * (note: IDE_DFLAG_PRESENT might still be not set)
*/
static inline u8 probe_for_drive (ide_drive_t *drive)
@@ -559,10 +566,10 @@ static inline u8 probe_for_drive (ide_drive_t *drive)
* Also note that 0 everywhere means "can't do X"
*/
+ drive->dev_flags &= ~IDE_DFLAG_ID_READ;
+
drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
- drive->id_read = 0;
- if(drive->id == NULL)
- {
+ if (drive->id == NULL) {
printk(KERN_ERR "ide: out of memory for id data.\n");
return 0;
}
@@ -571,14 +578,14 @@ static inline u8 probe_for_drive (ide_drive_t *drive)
strcpy(m, "UNKNOWN");
/* skip probing? */
- if (!drive->noprobe) {
+ if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0) {
retry:
/* if !(success||timed-out) */
if (do_probe(drive, ATA_CMD_ID_ATA) >= 2)
/* look for ATAPI device */
(void)do_probe(drive, ATA_CMD_ID_ATAPI);
- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
/* drive not found */
return 0;
@@ -588,7 +595,7 @@ retry:
}
/* identification failed? */
- if (!drive->id_read) {
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
if (drive->media == ide_disk) {
printk(KERN_INFO "%s: non-IDE drive, CHS=%d/%d/%d\n",
drive->name, drive->cyl,
@@ -598,15 +605,17 @@ retry:
} else {
/* nuke it */
printk(KERN_WARNING "%s: Unknown device on bus refused identification. Ignoring.\n", drive->name);
- drive->present = 0;
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
}
}
/* drive was found */
}
- if(!drive->present)
+
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
return 0;
+
/* The drive wasn't being helpful. Add generic info only */
- if (drive->id_read == 0) {
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
generic_id(drive);
return 1;
}
@@ -616,7 +625,7 @@ retry:
ide_disk_init_mult_count(drive);
}
- return drive->present;
+ return !!(drive->dev_flags & IDE_DFLAG_PRESENT);
}
static void hwif_release_dev(struct device *dev)
@@ -707,7 +716,8 @@ static int ide_port_wait_ready(ide_hwif_t *hwif)
ide_drive_t *drive = &hwif->drives[unit];
/* Ignore disks that we will not probe for later. */
- if (!drive->noprobe || drive->present) {
+ if ((drive->dev_flags & IDE_DFLAG_NOPROBE) == 0 ||
+ (drive->dev_flags & IDE_DFLAG_PRESENT)) {
SELECT_DRIVE(drive);
hwif->tp_ops->set_irq(hwif, 1);
mdelay(2);
@@ -739,7 +749,7 @@ void ide_undecoded_slave(ide_drive_t *dev1)
{
ide_drive_t *dev0 = &dev1->hwif->drives[0];
- if ((dev1->dn & 1) == 0 || dev0->present == 0)
+ if ((dev1->dn & 1) == 0 || (dev0->dev_flags & IDE_DFLAG_PRESENT) == 0)
return;
/* If the models don't match they are not the same product */
@@ -759,7 +769,7 @@ void ide_undecoded_slave(ide_drive_t *dev1)
/* Appears to be an IDE flash adapter with decode bugs */
printk(KERN_WARNING "ide-probe: ignoring undecoded slave\n");
- dev1->present = 0;
+ dev1->dev_flags &= ~IDE_DFLAG_PRESENT;
}
EXPORT_SYMBOL_GPL(ide_undecoded_slave);
@@ -772,7 +782,8 @@ static int ide_probe_port(ide_hwif_t *hwif)
BUG_ON(hwif->present);
- if (hwif->drives[0].noprobe && hwif->drives[1].noprobe)
+ if ((hwif->drives[0].dev_flags & IDE_DFLAG_NOPROBE) &&
+ (hwif->drives[1].dev_flags & IDE_DFLAG_NOPROBE))
return -EACCES;
/*
@@ -794,9 +805,9 @@ static int ide_probe_port(ide_hwif_t *hwif)
*/
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
- drive->dn = (hwif->channel ? 2 : 0) + unit;
+
(void) probe_for_drive(drive);
- if (drive->present)
+ if (drive->dev_flags & IDE_DFLAG_PRESENT)
rc = 0;
}
@@ -820,17 +831,19 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
for (unit = 0; unit < MAX_DRIVES; unit++) {
ide_drive_t *drive = &hwif->drives[unit];
- if (drive->present && port_ops && port_ops->quirkproc)
- port_ops->quirkproc(drive);
+ if (drive->dev_flags & IDE_DFLAG_PRESENT) {
+ if (port_ops && port_ops->quirkproc)
+ port_ops->quirkproc(drive);
+ }
}
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
- if (drive->present) {
+ if (drive->dev_flags & IDE_DFLAG_PRESENT) {
ide_set_max_pio(drive);
- drive->nice1 = 1;
+ drive->dev_flags |= IDE_DFLAG_NICE1;
if (hwif->dma_ops)
ide_set_dma(drive);
@@ -840,14 +853,14 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
- if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT)
- drive->no_io_32bit = 1;
+ if ((hwif->host_flags & IDE_HFLAG_NO_IO_32BIT) ||
+ drive->id[ATA_ID_DWORD_IO])
+ drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;
else
- drive->no_io_32bit = drive->id[ATA_ID_DWORD_IO] ? 1 : 0;
+ drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;
}
}
-#if MAX_HWIFS > 1
/*
* save_match() is used to simplify logic in init_irq() below.
*
@@ -872,7 +885,6 @@ static void save_match(ide_hwif_t *hwif, ide_hwif_t *new, ide_hwif_t **match)
if (!m || m->irq != hwif->irq) /* don't undo a prior perfect match */
*match = new;
}
-#endif /* MAX_HWIFS > 1 */
/*
* init request queue
@@ -951,26 +963,33 @@ static void ide_add_drive_to_hwgroup(ide_drive_t *drive)
* - allocate the block device queue
* - link drive into the hwgroup
*/
-static void ide_port_setup_devices(ide_hwif_t *hwif)
+static int ide_port_setup_devices(ide_hwif_t *hwif)
{
- int i;
+ int i, j = 0;
mutex_lock(&ide_cfg_mtx);
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];
- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
continue;
if (ide_init_queue(drive)) {
printk(KERN_ERR "ide: failed to init %s\n",
drive->name);
+ kfree(drive->id);
+ drive->id = NULL;
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
continue;
}
+ j++;
+
ide_add_drive_to_hwgroup(drive);
}
mutex_unlock(&ide_cfg_mtx);
+
+ return j;
}
static ide_hwif_t *ide_ports[MAX_HWIFS];
@@ -1029,7 +1048,7 @@ static int init_irq (ide_hwif_t *hwif)
mutex_lock(&ide_cfg_mtx);
hwif->hwgroup = NULL;
-#if MAX_HWIFS > 1
+
/*
* Group up with any other hwifs that share our irq(s).
*/
@@ -1054,7 +1073,7 @@ static int init_irq (ide_hwif_t *hwif)
}
}
}
-#endif /* MAX_HWIFS > 1 */
+
/*
* If we are still without a hwgroup, then form a new one
*/
@@ -1153,12 +1172,13 @@ static struct kobject *ata_probe(dev_t dev, int *part, void *data)
ide_hwif_t *hwif = data;
int unit = *part >> PARTN_BITS;
ide_drive_t *drive = &hwif->drives[unit];
- if (!drive->present)
+
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
return NULL;
if (drive->media == ide_disk)
request_module("ide-disk");
- if (drive->scsi)
+ if (drive->dev_flags & IDE_DFLAG_SCSI)
request_module("ide-scsi");
if (drive->media == ide_cdrom || drive->media == ide_optical)
request_module("ide-cd");
@@ -1205,7 +1225,7 @@ EXPORT_SYMBOL_GPL(ide_unregister_region);
void ide_init_disk(struct gendisk *disk, ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- unsigned int unit = (drive->select.all >> 4) & 1;
+ unsigned int unit = drive->dn & 1;
disk->major = hwif->major;
disk->first_minor = unit << PARTN_BITS;
@@ -1248,7 +1268,7 @@ static void drive_release_dev (struct device *dev)
ide_remove_drive_from_hwgroup(drive);
kfree(drive->id);
drive->id = NULL;
- drive->present = 0;
+ drive->dev_flags &= ~IDE_DFLAG_PRESENT;
/* Messed up locking ... */
spin_unlock_irq(&ide_lock);
blk_cleanup_queue(drive->queue);
@@ -1327,7 +1347,7 @@ static void hwif_register_devices(ide_hwif_t *hwif)
struct device *dev = &drive->gendev;
int ret;
- if (!drive->present)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
continue;
snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i);
@@ -1351,12 +1371,14 @@ static void ide_port_init_devices(ide_hwif_t *hwif)
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];
+ drive->dn = i + hwif->channel * 2;
+
if (hwif->host_flags & IDE_HFLAG_IO_32BIT)
drive->io_32bit = 1;
if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS)
- drive->unmask = 1;
+ drive->dev_flags |= IDE_DFLAG_UNMASK;
if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
- drive->no_unmask = 1;
+ drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
if (port_ops && port_ops->init_dev)
port_ops->init_dev(drive);
@@ -1513,19 +1535,14 @@ static int ide_find_port_slot(const struct ide_port_info *d)
* ports 0x1f0/0x170 (the ide0/ide1 defaults).
*/
mutex_lock(&ide_cfg_mtx);
- if (MAX_HWIFS == 1) {
- if (ide_indexes == 0 && i == 0)
- idx = 1;
+ if (bootable) {
+ if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1)
+ idx = ffz(ide_indexes | i);
} else {
- if (bootable) {
- if ((ide_indexes | i) != (1 << MAX_HWIFS) - 1)
- idx = ffz(ide_indexes | i);
- } else {
- if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1)
- idx = ffz(ide_indexes | 3);
- else if ((ide_indexes & 3) != 3)
- idx = ffz(ide_indexes);
- }
+ if ((ide_indexes | 3) != (1 << MAX_HWIFS) - 1)
+ idx = ffz(ide_indexes | 3);
+ else if ((ide_indexes & 3) != 3)
+ idx = ffz(ide_indexes);
}
if (idx >= 0)
ide_indexes |= (1 << idx);
@@ -1541,8 +1558,7 @@ static void ide_free_port_slot(int idx)
mutex_unlock(&ide_cfg_mtx);
}
-struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
- hw_regs_t **hws)
+struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
{
struct ide_host *host;
int i;
@@ -1551,7 +1567,7 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
if (host == NULL)
return NULL;
- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
ide_hwif_t *hwif;
int idx;
@@ -1593,18 +1609,6 @@ struct ide_host *ide_host_alloc_all(const struct ide_port_info *d,
return host;
}
-EXPORT_SYMBOL_GPL(ide_host_alloc_all);
-
-struct ide_host *ide_host_alloc(const struct ide_port_info *d, hw_regs_t **hws)
-{
- hw_regs_t *hws_all[MAX_HWIFS];
- int i;
-
- for (i = 0; i < MAX_HWIFS; i++)
- hws_all[i] = (i < 4) ? hws[i] : NULL;
-
- return ide_host_alloc_all(d, hws_all);
-}
EXPORT_SYMBOL_GPL(ide_host_alloc);
int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
@@ -1613,7 +1617,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
ide_hwif_t *hwif, *mate = NULL;
int i, j = 0;
- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];
if (hwif == NULL) {
@@ -1626,22 +1630,22 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
if (d == NULL) {
mate = NULL;
- continue;
- }
+ } else {
+ if ((i & 1) && mate) {
+ hwif->mate = mate;
+ mate->mate = hwif;
+ }
- if ((i & 1) && mate) {
- hwif->mate = mate;
- mate->mate = hwif;
- }
+ mate = (i & 1) ? NULL : hwif;
- mate = (i & 1) ? NULL : hwif;
+ ide_init_port(hwif, i & 1, d);
+ ide_port_cable_detect(hwif);
+ }
- ide_init_port(hwif, i & 1, d);
- ide_port_cable_detect(hwif);
ide_port_init_devices(hwif);
}
- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];
if (hwif == NULL)
@@ -1658,7 +1662,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
ide_port_tune_devices(hwif);
}
- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];
if (hwif == NULL)
@@ -1671,10 +1675,13 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
continue;
}
- j++;
-
if (hwif->present)
- ide_port_setup_devices(hwif);
+ if (ide_port_setup_devices(hwif) == 0) {
+ hwif->present = 0;
+ continue;
+ }
+
+ j++;
ide_acpi_init(hwif);
@@ -1682,7 +1689,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
ide_acpi_port_init_devices(hwif);
}
- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];
if (hwif == NULL)
@@ -1695,7 +1702,7 @@ int ide_host_register(struct ide_host *host, const struct ide_port_info *d,
hwif_register_devices(hwif);
}
- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];
if (hwif == NULL)
@@ -1740,7 +1747,7 @@ void ide_host_free(struct ide_host *host)
ide_hwif_t *hwif;
int i;
- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
hwif = host->ports[i];
if (hwif == NULL)
@@ -1758,7 +1765,7 @@ void ide_host_remove(struct ide_host *host)
{
int i;
- for (i = 0; i < MAX_HWIFS; i++) {
+ for (i = 0; i < MAX_HOST_PORTS; i++) {
if (host->ports[i])
ide_unregister(host->ports[i]);
}
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index e7030a491463..b26926487cc0 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -227,7 +227,7 @@ static int set_xfer_rate (ide_drive_t *drive, int arg)
ide_devset_rw(current_speed, xfer_rate);
ide_devset_rw_field(init_speed, init_speed);
-ide_devset_rw_field(nice1, nice1);
+ide_devset_rw_flag(nice1, IDE_DFLAG_NICE1);
ide_devset_rw_field(number, dn);
static const struct ide_proc_devset ide_generic_settings[] = {
@@ -622,9 +622,7 @@ void ide_proc_port_register_devices(ide_hwif_t *hwif)
for (d = 0; d < MAX_DRIVES; d++) {
ide_drive_t *drive = &hwif->drives[d];
- if (!drive->present)
- continue;
- if (drive->proc)
+ if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0 || drive->proc)
continue;
drive->proc = proc_mkdir(drive->name, parent);
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index f8c84df4a0bc..25ac60f53273 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -172,23 +172,16 @@ typedef struct ide_tape_obj {
struct kref kref;
/*
- * pc points to the current processed packet command.
- *
* failed_pc points to the last failed packet command, or contains
* NULL if we do not need to retry any packet command. This is
* required since an additional packet command is needed before the
* retry, to get detailed information on what went wrong.
*/
- /* Current packet command */
- struct ide_atapi_pc *pc;
/* Last failed packet command */
struct ide_atapi_pc *failed_pc;
/* used by REQ_IDETAPE_{READ,WRITE} requests */
struct ide_atapi_pc queued_pc;
- struct ide_atapi_pc request_sense_pc;
- struct request request_sense_rq;
-
/*
* DSC polling variables.
*
@@ -274,11 +267,6 @@ static DEFINE_MUTEX(idetape_ref_mutex);
static struct class *idetape_sysfs_class;
-#define to_ide_tape(obj) container_of(obj, struct ide_tape_obj, kref)
-
-#define ide_tape_g(disk) \
- container_of((disk)->private_data, struct ide_tape_obj, driver)
-
static void ide_tape_release(struct kref *);
static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
@@ -286,7 +274,7 @@ static struct ide_tape_obj *ide_tape_get(struct gendisk *disk)
struct ide_tape_obj *tape = NULL;
mutex_lock(&idetape_ref_mutex);
- tape = ide_tape_g(disk);
+ tape = ide_drv_g(disk, ide_tape_obj);
if (tape) {
if (ide_device_get(tape->drive))
tape = NULL;
@@ -313,8 +301,6 @@ static void ide_tape_put(struct ide_tape_obj *tape)
*/
static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES];
-#define ide_tape_f(file) ((file)->private_data)
-
static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i)
{
struct ide_tape_obj *tape = NULL;
@@ -522,14 +508,19 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects)
return 0;
}
-static void ide_tape_callback(ide_drive_t *drive)
+static void ide_tape_handle_dsc(ide_drive_t *);
+
+static void ide_tape_callback(ide_drive_t *drive, int dsc)
{
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
int uptodate = pc->error ? 0 : 1;
debug_log(DBG_PROCS, "Enter %s\n", __func__);
+ if (dsc)
+ ide_tape_handle_dsc(drive);
+
if (tape->failed_pc == pc)
tape->failed_pc = NULL;
@@ -558,7 +549,7 @@ static void ide_tape_callback(ide_drive_t *drive)
if (pc->error)
uptodate = pc->error;
} else if (pc->c[0] == READ_POSITION && uptodate) {
- u8 *readpos = tape->pc->buf;
+ u8 *readpos = pc->buf;
debug_log(DBG_SENSE, "BOP - %s\n",
(readpos[0] & 0x80) ? "Yes" : "No");
@@ -583,31 +574,6 @@ static void ide_tape_callback(ide_drive_t *drive)
idetape_end_request(drive, uptodate, 0);
}
-static void idetape_create_request_sense_cmd(struct ide_atapi_pc *pc)
-{
- ide_init_pc(pc);
- pc->c[0] = REQUEST_SENSE;
- pc->c[4] = 20;
- pc->req_xfer = 20;
-}
-
-/*
- * idetape_retry_pc is called when an error was detected during the
- * last packet command. We queue a request sense packet command in
- * the head of the request list.
- */
-static void idetape_retry_pc(ide_drive_t *drive)
-{
- struct ide_tape_obj *tape = drive->driver_data;
- struct request *rq = &tape->request_sense_rq;
- struct ide_atapi_pc *pc = &tape->request_sense_pc;
-
- (void)ide_read_error(drive);
- idetape_create_request_sense_cmd(pc);
- set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- ide_queue_pc_head(drive, tape->disk, pc, rq);
-}
-
/*
* Postpone the current request so that ide.c will be able to service requests
* from another device on the same hwgroup while we are polling for DSC.
@@ -646,34 +612,18 @@ static int ide_tape_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
}
/*
- * This is the usual interrupt handler which will be called during a packet
- * command. We will transfer some of the data (as requested by the drive) and
- * will re-point interrupt handler to us. When data transfer is finished, we
- * will act according to the algorithm described before
- * idetape_issue_pc.
- */
-static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- return ide_pc_intr(drive, tape->pc, idetape_pc_intr, WAIT_TAPE_CMD,
- NULL, idetape_update_buffers, idetape_retry_pc,
- ide_tape_handle_dsc, ide_tape_io_buffers);
-}
-
-/*
* Packet Command Interface
*
- * The current Packet Command is available in tape->pc, and will not change
+ * The current Packet Command is available in drive->pc, and will not change
* until we finish handling it. Each packet command is associated with a
* callback function that will be called when the command is finished.
*
* The handling will be done in three stages:
*
* 1. idetape_issue_pc will send the packet command to the drive, and will set
- * the interrupt handler to idetape_pc_intr.
+ * the interrupt handler to ide_pc_intr.
*
- * 2. On each interrupt, idetape_pc_intr will be called. This step will be
+ * 2. On each interrupt, ide_pc_intr will be called. This step will be
* repeated until the device signals us that no more interrupts will be issued.
*
* 3. ATAPI Tape media access commands have immediate status with a delayed
@@ -697,20 +647,13 @@ static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
* again, the callback function will be called and then we will handle the next
* request.
*/
-static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive)
-{
- idetape_tape_t *tape = drive->driver_data;
-
- return ide_transfer_pc(drive, tape->pc, idetape_pc_intr,
- WAIT_TAPE_CMD, NULL);
-}
static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
struct ide_atapi_pc *pc)
{
idetape_tape_t *tape = drive->driver_data;
- if (tape->pc->c[0] == REQUEST_SENSE &&
+ if (drive->pc->c[0] == REQUEST_SENSE &&
pc->c[0] == REQUEST_SENSE) {
printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
"Two request sense in serial were issued\n");
@@ -718,8 +661,9 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
if (tape->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
tape->failed_pc = pc;
+
/* Set the current packet command */
- tape->pc = pc;
+ drive->pc = pc;
if (pc->retries > IDETAPE_MAX_PC_RETRIES ||
(pc->flags & PC_FLAG_ABORT)) {
@@ -743,15 +687,14 @@ static ide_startstop_t idetape_issue_pc(ide_drive_t *drive,
pc->error = IDETAPE_ERROR_GENERAL;
}
tape->failed_pc = NULL;
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]);
pc->retries++;
- return ide_issue_pc(drive, pc, idetape_transfer_pc,
- WAIT_TAPE_CMD, NULL);
+ return ide_issue_pc(drive, WAIT_TAPE_CMD, NULL);
}
/* A mode sense command is used to "sense" tape parameters. */
@@ -785,7 +728,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
- struct ide_atapi_pc *pc = tape->pc;
+ struct ide_atapi_pc *pc = drive->pc;
u8 stat;
stat = hwif->tp_ops->read_status(hwif);
@@ -797,7 +740,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
printk(KERN_ERR "ide-tape: %s: I/O error, ",
tape->name);
/* Retry operation */
- idetape_retry_pc(drive);
+ ide_retry_pc(drive, tape->disk);
return ide_stopped;
}
pc->error = 0;
@@ -805,7 +748,7 @@ static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive)
pc->error = IDETAPE_ERROR_GENERAL;
tape->failed_pc = NULL;
}
- drive->pc_callback(drive);
+ drive->pc_callback(drive, 0);
return ide_stopped;
}
@@ -862,7 +805,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
}
/* Retry a failed packet command */
- if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) {
+ if (tape->failed_pc && drive->pc->c[0] == REQUEST_SENSE) {
pc = tape->failed_pc;
goto out;
}
@@ -883,12 +826,13 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive,
*/
stat = hwif->tp_ops->read_status(hwif);
- if (!drive->dsc_overlap && !(rq->cmd[13] & REQ_IDETAPE_PC2))
+ if ((drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) == 0 &&
+ (rq->cmd[13] & REQ_IDETAPE_PC2) == 0)
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- if (drive->post_reset == 1) {
+ if (drive->dev_flags & IDE_DFLAG_POST_RESET) {
set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
- drive->post_reset = 0;
+ drive->dev_flags &= ~IDE_DFLAG_POST_RESET;
}
if (!test_and_clear_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags) &&
@@ -1411,7 +1355,7 @@ static int idetape_init_read(ide_drive_t *drive)
* No point in issuing this if DSC overlap isn't supported, some
* drives (Seagate STT3401A) will return an error.
*/
- if (drive->dsc_overlap) {
+ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
bytes_read = idetape_queue_rw_tail(drive,
REQ_IDETAPE_READ, 0,
tape->merge_bh);
@@ -1592,7 +1536,7 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op,
static ssize_t idetape_chrdev_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
ssize_t bytes_read, temp, actually_read = 0, rc;
ssize_t ret = 0;
@@ -1654,7 +1598,7 @@ finish:
static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
ssize_t actually_written = 0;
ssize_t ret = 0;
@@ -1687,7 +1631,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf,
* point in issuing this if DSC overlap isn't supported, some
* drives (Seagate STT3401A) will return an error.
*/
- if (drive->dsc_overlap) {
+ if (drive->dev_flags & IDE_DFLAG_DSC_OVERLAP) {
ssize_t retval = idetape_queue_rw_tail(drive,
REQ_IDETAPE_WRITE, 0,
tape->merge_bh);
@@ -1886,7 +1830,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count)
static int idetape_chrdev_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
- struct ide_tape_obj *tape = ide_tape_f(file);
+ struct ide_tape_obj *tape = file->private_data;
ide_drive_t *drive = tape->drive;
struct mtop mtop;
struct mtget mtget;
@@ -2063,7 +2007,7 @@ static void idetape_write_release(ide_drive_t *drive, unsigned int minor)
static int idetape_chrdev_release(struct inode *inode, struct file *filp)
{
- struct ide_tape_obj *tape = ide_tape_f(filp);
+ struct ide_tape_obj *tape = filp->private_data;
ide_drive_t *drive = tape->drive;
unsigned int minor = iminor(inode);
@@ -2202,7 +2146,7 @@ static int divf_tdsc(ide_drive_t *drive) { return HZ; }
static int divf_buffer(ide_drive_t *drive) { return 2; }
static int divf_buffer_size(ide_drive_t *drive) { return 1024; }
-ide_devset_rw_field(dsc_overlap, dsc_overlap);
+ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP);
ide_tape_devset_rw_field(debug_mask, debug_mask);
ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq);
@@ -2241,33 +2185,32 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
unsigned long t;
int speed;
int buffer_size;
- u8 gcw[2];
u16 *ctl = (u16 *)&tape->caps[12];
- drive->pc_callback = ide_tape_callback;
+ drive->pc_callback = ide_tape_callback;
+ drive->pc_update_buffers = idetape_update_buffers;
+ drive->pc_io_buffers = ide_tape_io_buffers;
spin_lock_init(&tape->lock);
- drive->dsc_overlap = 1;
+
+ drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP;
+
if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
tape->name);
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
}
+
/* Seagate Travan drives do not support DSC overlap. */
if (strstr((char *)&drive->id[ATA_ID_PROD], "Seagate STT3401"))
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
+
tape->minor = minor;
tape->name[0] = 'h';
tape->name[1] = 't';
tape->name[2] = '0' + minor;
tape->chrdev_dir = IDETAPE_DIR_NONE;
- *((u16 *)&gcw) = drive->id[ATA_ID_CONFIG];
-
- /* Command packet DRQ type */
- if (((gcw[0] & 0x60) >> 5) == 1)
- set_bit(IDE_AFLAG_DRQ_INTERRUPT, &drive->atapi_flags);
-
idetape_get_inquiry_results(drive);
idetape_get_mode_sense_results(drive);
ide_tape_get_bsize_from_bdesc(drive);
@@ -2302,7 +2245,7 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor)
(*(u16 *)&tape->caps[16] * 512) / tape->buffer_size,
tape->buffer_size / 1024,
tape->best_dsc_rw_freq * 1000 / HZ,
- drive->using_dma ? ", DMA":"");
+ (drive->dev_flags & IDE_DFLAG_USING_DMA) ? ", DMA" : "");
ide_proc_register_driver(drive, tape->driver);
}
@@ -2320,13 +2263,13 @@ static void ide_tape_remove(ide_drive_t *drive)
static void ide_tape_release(struct kref *kref)
{
- struct ide_tape_obj *tape = to_ide_tape(kref);
+ struct ide_tape_obj *tape = to_ide_drv(kref, ide_tape_obj);
ide_drive_t *drive = tape->drive;
struct gendisk *g = tape->disk;
BUG_ON(tape->merge_bh_size);
- drive->dsc_overlap = 0;
+ drive->dev_flags &= ~IDE_DFLAG_DSC_OVERLAP;
drive->driver_data = NULL;
device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor));
device_destroy(idetape_sysfs_class,
@@ -2368,7 +2311,6 @@ static ide_driver_t idetape_driver = {
.probe = ide_tape_probe,
.remove = ide_tape_remove,
.version = IDETAPE_VERSION,
- .media = ide_tape,
.do_request = idetape_do_request,
.end_request = idetape_end_request,
.error = __ide_error,
@@ -2403,7 +2345,7 @@ static int idetape_open(struct inode *inode, struct file *filp)
static int idetape_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ide_tape_obj *tape = ide_tape_g(disk);
+ struct ide_tape_obj *tape = ide_drv_g(disk, ide_tape_obj);
ide_tape_put(tape);
@@ -2414,7 +2356,7 @@ static int idetape_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct block_device *bdev = inode->i_bdev;
- struct ide_tape_obj *tape = ide_tape_g(bdev->bd_disk);
+ struct ide_tape_obj *tape = ide_drv_g(bdev->bd_disk, ide_tape_obj);
ide_drive_t *drive = tape->drive;
int err = generic_ide_ioctl(drive, file, bdev, cmd, arg);
if (err == -EINVAL)
@@ -2441,7 +2383,8 @@ static int ide_tape_probe(ide_drive_t *drive)
if (drive->media != ide_tape)
goto failed;
- if (drive->id_read == 1 && !ide_check_atapi_device(drive, DRV_NAME)) {
+ if ((drive->dev_flags & IDE_DFLAG_ID_READ) &&
+ ide_check_atapi_device(drive, DRV_NAME) == 0) {
printk(KERN_ERR "ide-tape: %s: not supported by this version of"
" the driver\n", drive->name);
goto failed;
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 487b18b3ebae..bf4fb9d8d176 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -53,9 +53,6 @@ int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf)
}
static ide_startstop_t task_no_data_intr(ide_drive_t *);
-static ide_startstop_t set_geometry_intr(ide_drive_t *);
-static ide_startstop_t recal_intr(ide_drive_t *);
-static ide_startstop_t set_multmode_intr(ide_drive_t *);
static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *);
static ide_startstop_t task_in_intr(ide_drive_t *);
@@ -79,6 +76,8 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
if (task->tf_flags & IDE_TFLAG_FLAGGED)
task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS;
+ memcpy(&hwif->task, task, sizeof(*task));
+
if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) {
ide_tf_dump(drive->name, tf);
tp_ops->set_irq(hwif, 1);
@@ -99,24 +98,12 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
case TASKFILE_NO_DATA:
if (handler == NULL)
handler = task_no_data_intr;
- if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) {
- switch (tf->command) {
- case ATA_CMD_INIT_DEV_PARAMS:
- handler = set_geometry_intr;
- break;
- case ATA_CMD_RESTORE:
- handler = recal_intr;
- break;
- case ATA_CMD_SET_MULTI:
- handler = set_multmode_intr;
- break;
- }
- }
ide_execute_command(drive, tf->command, handler,
WAIT_WORSTCASE, NULL);
return ide_started;
default:
- if (drive->using_dma == 0 || dma_ops->dma_setup(drive))
+ if ((drive->dev_flags & IDE_DFLAG_USING_DMA) == 0 ||
+ dma_ops->dma_setup(drive))
return ide_stopped;
dma_ops->dma_exec_cmd(drive, tf->command);
dma_ops->dma_start(drive);
@@ -126,33 +113,15 @@ ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task)
EXPORT_SYMBOL_GPL(do_rw_taskfile);
/*
- * set_multmode_intr() is invoked on completion of a ATA_CMD_SET_MULTI cmd.
- */
-static ide_startstop_t set_multmode_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 stat;
-
- local_irq_enable_in_hardirq();
- stat = hwif->tp_ops->read_status(hwif);
-
- if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
- drive->mult_count = drive->mult_req;
- else {
- drive->mult_req = drive->mult_count = 0;
- drive->special.b.recalibrate = 1;
- (void) ide_dump_status(drive, "set_multmode", stat);
- }
- return ide_stopped;
-}
-
-/*
- * set_geometry_intr() is invoked on completion of a ATA_CMD_INIT_DEV_PARAMS cmd.
+ * Handler for commands without a data phase
*/
-static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
+static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- int retries = 5;
+ ide_task_t *task = &hwif->task;
+ struct ide_taskfile *tf = &task->tf;
+ int custom = (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) ? 1 : 0;
+ int retries = (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) ? 5 : 1;
u8 stat;
local_irq_enable_in_hardirq();
@@ -164,50 +133,36 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive)
udelay(10);
};
- if (OK_STAT(stat, ATA_DRDY, BAD_STAT))
- return ide_stopped;
-
- if (stat & (ATA_ERR | ATA_DRQ))
- return ide_error(drive, "set_geometry_intr", stat);
-
- ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL);
- return ide_started;
-}
-
-/*
- * recal_intr() is invoked on completion of a ATA_CMD_RESTORE (recalibrate) cmd.
- */
-static ide_startstop_t recal_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 stat;
-
- local_irq_enable_in_hardirq();
- stat = hwif->tp_ops->read_status(hwif);
-
- if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
- return ide_error(drive, "recal_intr", stat);
- return ide_stopped;
-}
-
-/*
- * Handler for commands without a data phase
- */
-static ide_startstop_t task_no_data_intr(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_task_t *args = hwif->hwgroup->rq->special;
- u8 stat;
-
- local_irq_enable_in_hardirq();
- stat = hwif->tp_ops->read_status(hwif);
-
- if (!OK_STAT(stat, ATA_DRDY, BAD_STAT))
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
+ if (custom && tf->command == ATA_CMD_SET_MULTI) {
+ drive->mult_req = drive->mult_count = 0;
+ drive->special.b.recalibrate = 1;
+ (void)ide_dump_status(drive, __func__, stat);
+ return ide_stopped;
+ } else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) {
+ if ((stat & (ATA_ERR | ATA_DRQ)) == 0) {
+ ide_set_handler(drive, &task_no_data_intr,
+ WAIT_WORSTCASE, NULL);
+ return ide_started;
+ }
+ }
return ide_error(drive, "task_no_data_intr", stat);
/* calls ide_end_drive_cmd */
+ }
- if (args)
+ if (!custom)
+ ide_end_drive_cmd(drive, stat, ide_read_error(drive));
+ else if (tf->command == ATA_CMD_IDLEIMMEDIATE) {
+ hwif->tp_ops->tf_read(drive, task);
+ if (tf->lbal != 0xc4) {
+ printk(KERN_ERR "%s: head unload failed!\n",
+ drive->name);
+ ide_tf_dump(drive->name, tf);
+ } else
+ drive->dev_flags |= IDE_DFLAG_PARKED;
ide_end_drive_cmd(drive, stat, ide_read_error(drive));
+ } else if (tf->command == ATA_CMD_SET_MULTI)
+ drive->mult_count = drive->mult_req;
return ide_stopped;
}
@@ -469,13 +424,12 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq)
if (ide_wait_stat(&startstop, drive, ATA_DRQ,
drive->bad_wstat, WAIT_DRQ)) {
printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n",
- drive->name,
- drive->hwif->data_phase ? "MULT" : "",
- drive->addressing ? "_EXT" : "");
+ drive->name, drive->hwif->data_phase ? "MULT" : "",
+ (drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : "");
return startstop;
}
- if (!drive->unmask)
+ if ((drive->dev_flags & IDE_DFLAG_UNMASK) == 0)
local_irq_disable();
ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL);
@@ -591,7 +545,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
args.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE |
IDE_TFLAG_IN_TF;
- if (drive->addressing == 1)
+ if (drive->dev_flags & IDE_DFLAG_LBA48)
args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB);
if (req_task->out_flags.all) {
@@ -694,7 +648,7 @@ int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
if ((args.tf_flags & IDE_TFLAG_FLAGGED_SET_IN_FLAGS) &&
req_task->in_flags.all == 0) {
req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS;
- if (drive->addressing == 1)
+ if (drive->dev_flags & IDE_DFLAG_LBA48)
req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8);
}
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 9dcf5aed92cb..04f8f13cb9d7 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -114,7 +114,7 @@ static void ide_port_init_devices_data(ide_hwif_t *hwif)
memset(drive, 0, sizeof(*drive));
drive->media = ide_disk;
- drive->select.all = (unit<<4)|0xa0;
+ drive->select = (unit << 4) | ATA_DEVICE_OBS;
drive->hwif = hwif;
drive->ready_stat = ATA_DRDY;
drive->bad_wstat = BAD_W_STAT;
@@ -138,7 +138,7 @@ static void __ide_port_unregister_devices(ide_hwif_t *hwif)
for (i = 0; i < MAX_DRIVES; i++) {
ide_drive_t *drive = &hwif->drives[i];
- if (drive->present) {
+ if (drive->dev_flags & IDE_DFLAG_PRESENT) {
spin_unlock_irq(&ide_lock);
device_unregister(&drive->gendev);
wait_for_completion(&drive->gendev_rel_comp);
@@ -227,8 +227,7 @@ void ide_unregister(ide_hwif_t *hwif)
kfree(hwif->sg_table);
unregister_blkdev(hwif->major, hwif->name);
- if (hwif->dma_base)
- ide_release_dma_engine(hwif);
+ ide_release_dma_engine(hwif);
mutex_unlock(&ide_cfg_mtx);
}
@@ -254,7 +253,7 @@ ide_devset_get(io_32bit, io_32bit);
static int set_io_32bit(ide_drive_t *drive, int arg)
{
- if (drive->no_io_32bit)
+ if (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT)
return -EPERM;
if (arg < 0 || arg > 1 + (SUPPORT_VLB_SYNC << 1))
@@ -265,19 +264,22 @@ static int set_io_32bit(ide_drive_t *drive, int arg)
return 0;
}
-ide_devset_get(ksettings, keep_settings);
+ide_devset_get_flag(ksettings, IDE_DFLAG_KEEP_SETTINGS);
static int set_ksettings(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 1)
return -EINVAL;
- drive->keep_settings = arg;
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_KEEP_SETTINGS;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_KEEP_SETTINGS;
return 0;
}
-ide_devset_get(using_dma, using_dma);
+ide_devset_get_flag(using_dma, IDE_DFLAG_USING_DMA);
static int set_using_dma(ide_drive_t *drive, int arg)
{
@@ -311,9 +313,32 @@ out:
#endif
}
+/*
+ * handle HDIO_SET_PIO_MODE ioctl abusers here, eventually it will go away
+ */
+static int set_pio_mode_abuse(ide_hwif_t *hwif, u8 req_pio)
+{
+ switch (req_pio) {
+ case 202:
+ case 201:
+ case 200:
+ case 102:
+ case 101:
+ case 100:
+ return (hwif->host_flags & IDE_HFLAG_ABUSE_DMA_MODES) ? 1 : 0;
+ case 9:
+ case 8:
+ return (hwif->host_flags & IDE_HFLAG_ABUSE_PREFETCH) ? 1 : 0;
+ case 7:
+ case 6:
+ return (hwif->host_flags & IDE_HFLAG_ABUSE_FAST_DEVSEL) ? 1 : 0;
+ default:
+ return 0;
+ }
+}
+
static int set_pio_mode(ide_drive_t *drive, int arg)
{
- struct request *rq;
ide_hwif_t *hwif = drive->hwif;
const struct ide_port_ops *port_ops = hwif->port_ops;
@@ -324,56 +349,65 @@ static int set_pio_mode(ide_drive_t *drive, int arg)
(hwif->host_flags & IDE_HFLAG_NO_SET_MODE))
return -ENOSYS;
- if (drive->special.b.set_tune)
- return -EBUSY;
+ if (set_pio_mode_abuse(drive->hwif, arg)) {
+ if (arg == 8 || arg == 9) {
+ unsigned long flags;
- rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
- rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
+ /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */
+ spin_lock_irqsave(&ide_lock, flags);
+ port_ops->set_pio_mode(drive, arg);
+ spin_unlock_irqrestore(&ide_lock, flags);
+ } else
+ port_ops->set_pio_mode(drive, arg);
+ } else {
+ int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
- drive->tune_req = (u8) arg;
- drive->special.b.set_tune = 1;
+ ide_set_pio(drive, arg);
- blk_execute_rq(drive->queue, NULL, rq, 0);
- blk_put_request(rq);
+ if (hwif->host_flags & IDE_HFLAG_SET_PIO_MODE_KEEP_DMA) {
+ if (keep_dma)
+ ide_dma_on(drive);
+ }
+ }
return 0;
}
-ide_devset_get(unmaskirq, unmask);
+ide_devset_get_flag(unmaskirq, IDE_DFLAG_UNMASK);
static int set_unmaskirq(ide_drive_t *drive, int arg)
{
- if (drive->no_unmask)
+ if (drive->dev_flags & IDE_DFLAG_NO_UNMASK)
return -EPERM;
if (arg < 0 || arg > 1)
return -EINVAL;
- drive->unmask = arg;
+ if (arg)
+ drive->dev_flags |= IDE_DFLAG_UNMASK;
+ else
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;
return 0;
}
-#define ide_gen_devset_rw(_name, _func) \
-__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
-
-ide_gen_devset_rw(io_32bit, io_32bit);
-ide_gen_devset_rw(keepsettings, ksettings);
-ide_gen_devset_rw(unmaskirq, unmaskirq);
-ide_gen_devset_rw(using_dma, using_dma);
-__IDE_DEVSET(pio_mode, 0, NULL, set_pio_mode);
+ide_ext_devset_rw_sync(io_32bit, io_32bit);
+ide_ext_devset_rw_sync(keepsettings, ksettings);
+ide_ext_devset_rw_sync(unmaskirq, unmaskirq);
+ide_ext_devset_rw_sync(using_dma, using_dma);
+__IDE_DEVSET(pio_mode, DS_SYNC, NULL, set_pio_mode);
static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
- ide_drive_t *drive = dev->driver_data;
+ ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
ide_hwif_t *hwif = HWIF(drive);
struct request *rq;
struct request_pm_state rqpm;
ide_task_t args;
int ret;
- /* Call ACPI _GTM only once */
- if (!(drive->dn % 2))
+ /* call ACPI _GTM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL)
ide_acpi_get_timing(hwif);
memset(&rqpm, 0, sizeof(rqpm));
@@ -382,33 +416,32 @@ static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
rq->cmd_type = REQ_TYPE_PM_SUSPEND;
rq->special = &args;
rq->data = &rqpm;
- rqpm.pm_step = ide_pm_state_start_suspend;
+ rqpm.pm_step = IDE_PM_START_SUSPEND;
if (mesg.event == PM_EVENT_PRETHAW)
mesg.event = PM_EVENT_FREEZE;
rqpm.pm_state = mesg.event;
ret = blk_execute_rq(drive->queue, NULL, rq, 0);
blk_put_request(rq);
- /* only call ACPI _PS3 after both drivers are suspended */
- if (!ret && (((drive->dn % 2) && hwif->drives[0].present
- && hwif->drives[1].present)
- || !hwif->drives[0].present
- || !hwif->drives[1].present))
+
+ /* call ACPI _PS3 only after both devices are suspended */
+ if (ret == 0 && ((drive->dn & 1) || pair == NULL))
ide_acpi_set_state(hwif, 0);
+
return ret;
}
static int generic_ide_resume(struct device *dev)
{
- ide_drive_t *drive = dev->driver_data;
+ ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
ide_hwif_t *hwif = HWIF(drive);
struct request *rq;
struct request_pm_state rqpm;
ide_task_t args;
int err;
- /* Call ACPI _STM only once */
- if (!(drive->dn % 2)) {
+ /* call ACPI _PS0 / _STM only once */
+ if ((drive->dn & 1) == 0 || pair == NULL) {
ide_acpi_set_state(hwif, 1);
ide_acpi_push_timing(hwif);
}
@@ -422,7 +455,7 @@ static int generic_ide_resume(struct device *dev)
rq->cmd_flags |= REQ_PREEMPT;
rq->special = &args;
rq->data = &rqpm;
- rqpm.pm_step = ide_pm_state_start_resume;
+ rqpm.pm_step = IDE_PM_START_RESUME;
rqpm.pm_state = PM_EVENT_ON;
err = blk_execute_rq(drive->queue, NULL, rq, 1);
@@ -554,6 +587,7 @@ static struct device_attribute ide_dev_attrs[] = {
__ATTR_RO(model),
__ATTR_RO(firmware),
__ATTR(serial, 0400, serial_show, NULL),
+ __ATTR(unload_heads, 0644, ide_park_show, ide_park_store),
__ATTR_NULL
};
@@ -708,22 +742,22 @@ static int ide_set_disk_chs(const char *str, struct kernel_param *kp)
module_param_call(chs, ide_set_disk_chs, NULL, NULL, 0);
MODULE_PARM_DESC(chs, "force device as a disk (using CHS)");
-static void ide_dev_apply_params(ide_drive_t *drive)
+static void ide_dev_apply_params(ide_drive_t *drive, u8 unit)
{
- int i = drive->hwif->index * MAX_DRIVES + drive->select.b.unit;
+ int i = drive->hwif->index * MAX_DRIVES + unit;
if (ide_nodma & (1 << i)) {
printk(KERN_INFO "ide: disallowing DMA for %s\n", drive->name);
- drive->nodma = 1;
+ drive->dev_flags |= IDE_DFLAG_NODMA;
}
if (ide_noflush & (1 << i)) {
printk(KERN_INFO "ide: disabling flush requests for %s\n",
drive->name);
- drive->noflush = 1;
+ drive->dev_flags |= IDE_DFLAG_NOFLUSH;
}
if (ide_noprobe & (1 << i)) {
printk(KERN_INFO "ide: skipping probe for %s\n", drive->name);
- drive->noprobe = 1;
+ drive->dev_flags |= IDE_DFLAG_NOPROBE;
}
if (ide_nowerr & (1 << i)) {
printk(KERN_INFO "ide: ignoring the ATA_DF bit for %s\n",
@@ -732,7 +766,7 @@ static void ide_dev_apply_params(ide_drive_t *drive)
}
if (ide_cdroms & (1 << i)) {
printk(KERN_INFO "ide: forcing %s as a CD-ROM\n", drive->name);
- drive->present = 1;
+ drive->dev_flags |= IDE_DFLAG_PRESENT;
drive->media = ide_cdrom;
/* an ATAPI device ignores DRDY */
drive->ready_stat = 0;
@@ -741,11 +775,12 @@ static void ide_dev_apply_params(ide_drive_t *drive)
drive->cyl = drive->bios_cyl = ide_disks_chs[i].cyl;
drive->head = drive->bios_head = ide_disks_chs[i].head;
drive->sect = drive->bios_sect = ide_disks_chs[i].sect;
- drive->forced_geom = 1;
+
printk(KERN_INFO "ide: forcing %s as a disk (%d/%d/%d)\n",
drive->name,
drive->cyl, drive->head, drive->sect);
- drive->present = 1;
+
+ drive->dev_flags |= IDE_DFLAG_FORCED_GEOM | IDE_DFLAG_PRESENT;
drive->media = ide_disk;
drive->ready_stat = ATA_DRDY;
}
@@ -785,7 +820,7 @@ void ide_port_apply_params(ide_hwif_t *hwif)
}
for (i = 0; i < MAX_DRIVES; i++)
- ide_dev_apply_params(&hwif->drives[i]);
+ ide_dev_apply_params(&hwif->drives[i], i);
}
/*
diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/legacy/ali14xx.c
index 7276c96aaa2a..90da1f953ed0 100644
--- a/drivers/ide/legacy/ali14xx.c
+++ b/drivers/ide/legacy/ali14xx.c
@@ -131,7 +131,7 @@ static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
drive->name, pio, time1, time2, param1, param2, param3, param4);
/* stuff timing parameters into controller registers */
- driveNum = (HWIF(drive)->index << 1) + drive->select.b.unit;
+ driveNum = (drive->hwif->index << 1) + (drive->dn & 1);
spin_lock_irqsave(&ali14xx_lock, flags);
outb_p(regOn, basePort);
outReg(param1, regTab[driveNum].reg1);
diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/legacy/ht6560b.c
index 5123ea291d07..c7e5c2246b79 100644
--- a/drivers/ide/legacy/ht6560b.c
+++ b/drivers/ide/legacy/ht6560b.c
@@ -120,7 +120,8 @@ static void ht6560b_selectproc (ide_drive_t *drive)
* Need to enforce prefetch sometimes because otherwise
* it'll hang (hard).
*/
- if (drive->media != ide_disk || !drive->present)
+ if (drive->media != ide_disk ||
+ (drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
select |= HT_PREFETCH_MODE;
if (select != current_select || timing != current_timing) {
@@ -249,11 +250,11 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state)
*/
if (state) {
drive->drive_data |= t; /* enable prefetch mode */
- drive->no_unmask = 1;
- drive->unmask = 0;
+ drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;
} else {
drive->drive_data &= ~t; /* disable prefetch mode */
- drive->no_unmask = 0;
+ drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
}
spin_unlock_irqrestore(&ht6560b_lock, flags);
diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/legacy/ide-4drives.c
index c76d55de6996..9e85b1ec9607 100644
--- a/drivers/ide/legacy/ide-4drives.c
+++ b/drivers/ide/legacy/ide-4drives.c
@@ -14,7 +14,7 @@ MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port");
static void ide_4drives_init_dev(ide_drive_t *drive)
{
if (drive->hwif->channel)
- drive->select.all ^= 0x20;
+ drive->select ^= 0x20;
}
static const struct ide_port_ops ide_4drives_port_ops = {
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index ee6fc30d5e2b..cb199c815b53 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -219,103 +219,91 @@ out_release:
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+struct pcmcia_config_check {
+ unsigned long ctl_base;
+ int skip_vcc;
+ int is_kme;
+};
+
+static int pcmcia_check_one_config(struct pcmcia_device *pdev,
+ cistpl_cftable_entry_t *cfg,
+ cistpl_cftable_entry_t *dflt,
+ unsigned int vcc,
+ void *priv_data)
+{
+ struct pcmcia_config_check *stk = priv_data;
+
+ /* Check for matching Vcc, unless we're desperate */
+ if (!stk->skip_vcc) {
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000)
+ return -ENODEV;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
+ pdev->conf.ConfigIndex = cfg->index;
+ pdev->io.BasePort1 = io->win[0].base;
+ pdev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ pdev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ if (io->nwin == 2) {
+ pdev->io.NumPorts1 = 8;
+ pdev->io.BasePort2 = io->win[1].base;
+ pdev->io.NumPorts2 = (stk->is_kme) ? 2 : 1;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort2;
+ } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
+ pdev->io.NumPorts1 = io->win[0].len;
+ pdev->io.NumPorts2 = 0;
+ if (pcmcia_request_io(pdev, &pdev->io) != 0)
+ return -ENODEV;
+ stk->ctl_base = pdev->io.BasePort1 + 0x0e;
+ } else
+ return -ENODEV;
+ /* If we've got this far, we're done */
+ return 0;
+ }
+ return -ENODEV;
+}
+
static int ide_config(struct pcmcia_device *link)
{
ide_info_t *info = link->priv;
- tuple_t tuple;
- struct {
- u_short buf[128];
- cisparse_t parse;
- config_info_t conf;
- cistpl_cftable_entry_t dflt;
- } *stk = NULL;
- cistpl_cftable_entry_t *cfg;
- int pass, last_ret = 0, last_fn = 0, is_kme = 0;
+ struct pcmcia_config_check *stk = NULL;
+ int last_ret = 0, last_fn = 0, is_kme = 0;
unsigned long io_base, ctl_base;
struct ide_host *host;
DEBUG(0, "ide_config(0x%p)\n", link);
- stk = kzalloc(sizeof(*stk), GFP_KERNEL);
- if (!stk) goto err_mem;
- cfg = &stk->parse.cftable_entry;
-
- tuple.TupleData = (cisdata_t *)&stk->buf;
- tuple.TupleOffset = 0;
- tuple.TupleDataMax = 255;
- tuple.Attributes = 0;
-
is_kme = ((link->manf_id == MANFID_KME) &&
((link->card_id == PRODID_KME_KXLC005_A) ||
(link->card_id == PRODID_KME_KXLC005_B)));
- /* Not sure if this is right... look up the current Vcc */
- CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(link, &stk->conf));
-
- pass = io_base = ctl_base = 0;
- tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
- tuple.Attributes = 0;
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- while (1) {
- if (pcmcia_get_tuple_data(link, &tuple) != 0) goto next_entry;
- if (pcmcia_parse_tuple(link, &tuple, &stk->parse) != 0) goto next_entry;
-
- /* Check for matching Vcc, unless we're desperate */
- if (!pass) {
- if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- } else if (stk->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
- if (stk->conf.Vcc != stk->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000)
- goto next_entry;
- }
- }
-
- if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
- else if (stk->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
- link->conf.Vpp =
- stk->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
-
- if ((cfg->io.nwin > 0) || (stk->dflt.io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &stk->dflt.io;
- link->conf.ConfigIndex = cfg->index;
- link->io.BasePort1 = io->win[0].base;
- link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
- if (!(io->flags & CISTPL_IO_16BIT))
- link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- if (io->nwin == 2) {
- link->io.NumPorts1 = 8;
- link->io.BasePort2 = io->win[1].base;
- link->io.NumPorts2 = (is_kme) ? 2 : 1;
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- io_base = link->io.BasePort1;
- ctl_base = link->io.BasePort2;
- } else if ((io->nwin == 1) && (io->win[0].len >= 16)) {
- link->io.NumPorts1 = io->win[0].len;
- link->io.NumPorts2 = 0;
- if (pcmcia_request_io(link, &link->io) != 0)
- goto next_entry;
- io_base = link->io.BasePort1;
- ctl_base = link->io.BasePort1 + 0x0e;
- } else goto next_entry;
- /* If we've got this far, we're done */
- break;
- }
-
- next_entry:
- if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
- memcpy(&stk->dflt, cfg, sizeof(stk->dflt));
- if (pass) {
- CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
- } else if (pcmcia_get_next_tuple(link, &tuple) != 0) {
- CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
- memset(&stk->dflt, 0, sizeof(stk->dflt));
- pass++;
- }
+ stk = kzalloc(sizeof(*stk), GFP_KERNEL);
+ if (!stk)
+ goto err_mem;
+ stk->is_kme = is_kme;
+ stk->skip_vcc = io_base = ctl_base = 0;
+
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) {
+ stk->skip_vcc = 1;
+ if (pcmcia_loop_config(link, pcmcia_check_one_config, stk))
+ goto failed; /* No suitable config found */
}
+ io_base = link->io.BasePort1;
+ ctl_base = stk->ctl_base;
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
@@ -403,8 +391,10 @@ static struct pcmcia_device_id ide_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
+ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
+ PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/legacy/qd65xx.c
index ec408b3a7100..bc27c7aba936 100644
--- a/drivers/ide/legacy/qd65xx.c
+++ b/drivers/ide/legacy/qd65xx.c
@@ -305,7 +305,7 @@ static void __init qd6580_init_dev(ide_drive_t *drive)
} else
t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
- drive->drive_data = drive->select.b.unit ? t2 : t1;
+ drive->drive_data = (drive->dn & 1) ? t2 : t1;
}
static const struct ide_port_ops qd6500_port_ops = {
diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/mips/au1xxx-ide.c
index 11b7f61aae40..0ec8fd1e4dcb 100644
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -322,11 +322,7 @@ static int auide_dma_setup(ide_drive_t *drive)
}
static int auide_dma_test_irq(ide_drive_t *drive)
-{
- if (drive->waiting_for_dma == 0)
- printk(KERN_WARNING "%s: ide_dma_test_irq \
- called while not waiting\n", drive->name);
-
+{
/* If dbdma didn't execute the STOP command yet, the
* active bit is still set
*/
@@ -344,11 +340,6 @@ static void auide_dma_host_set(ide_drive_t *drive, int on)
{
}
-static void auide_dma_lost_irq(ide_drive_t *drive)
-{
- printk(KERN_ERR "%s: IRQ lost\n", drive->name);
-}
-
static void auide_ddma_tx_callback(int irq, void *param)
{
_auide_hwif *ahwif = (_auide_hwif*)param;
@@ -375,18 +366,6 @@ static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 de
}
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-static void auide_dma_timeout(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
-
- printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
-
- if (auide_dma_test_irq(drive))
- return;
-
- auide_dma_end(drive);
-}
-
static const struct ide_dma_ops au1xxx_dma_ops = {
.dma_host_set = auide_dma_host_set,
.dma_setup = auide_dma_setup,
@@ -394,8 +373,8 @@ static const struct ide_dma_ops au1xxx_dma_ops = {
.dma_start = auide_dma_start,
.dma_end = auide_dma_end,
.dma_test_irq = auide_dma_test_irq,
- .dma_lost_irq = auide_dma_lost_irq,
- .dma_timeout = auide_dma_timeout,
+ .dma_lost_irq = ide_dma_lost_irq,
+ .dma_timeout = ide_dma_timeout,
};
static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
@@ -448,10 +427,9 @@ static int auide_ddma_init(ide_hwif_t *hwif, const struct ide_port_info *d)
NUM_DESCRIPTORS);
auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
NUM_DESCRIPTORS);
-
- hwif->dmatable_cpu = dma_alloc_coherent(hwif->dev,
- PRD_ENTRIES * PRD_BYTES, /* 1 Page */
- &hwif->dmatable_dma, GFP_KERNEL);
+
+ /* FIXME: check return value */
+ (void)ide_allocate_dma_engine(hwif);
au1xxx_dbdma_start( auide->tx_chan );
au1xxx_dbdma_start( auide->rx_chan );
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index e7475ba559c7..4142c698e0d3 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -115,7 +115,7 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct ide_host *host = pci_get_drvdata(dev);
struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
- u8 unit = (drive->select.b.unit & 0x01);
+ u8 unit = drive->dn & 1;
u8 tmp1 = 0, tmp2 = 0;
u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
unsigned long flags;
@@ -302,7 +302,7 @@ static const struct pci_device_id aec62xx_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver aec62xx_pci_driver = {
.name = "AEC62xx_IDE",
.id_table = aec62xx_pci_tbl,
.probe = aec62xx_init_one,
@@ -313,12 +313,12 @@ static struct pci_driver driver = {
static int __init aec62xx_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&aec62xx_pci_driver);
}
static void __exit aec62xx_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&aec62xx_pci_driver);
}
module_init(aec62xx_ide_init);
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index 053c75263918..daf9dce39e52 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -77,8 +77,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
int port = hwif->channel ? 0x5c : 0x58;
int portFIFO = hwif->channel ? 0x55 : 0x54;
- u8 cd_dma_fifo = 0;
- int unit = drive->select.b.unit & 1;
+ u8 cd_dma_fifo = 0, unit = drive->dn & 1;
if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
s_clc = 0;
@@ -112,7 +111,7 @@ static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
pci_write_config_byte(dev, port, s_clc);
- pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc);
+ pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc);
local_irq_restore(flags);
}
@@ -154,7 +153,7 @@ static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
u8 speed1 = speed;
- u8 unit = (drive->select.b.unit & 0x01);
+ u8 unit = drive->dn & 1;
u8 tmpbyte = 0x00;
int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
@@ -508,7 +507,7 @@ static const struct ide_dma_ops ali_dma_ops = {
.dma_setup = ali15x3_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
@@ -576,7 +575,7 @@ static const struct pci_device_id alim15x3_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver alim15x3_pci_driver = {
.name = "ALI15x3_IDE",
.id_table = alim15x3_pci_tbl,
.probe = alim15x3_init_one,
@@ -587,12 +586,12 @@ static struct pci_driver driver = {
static int __init ali15x3_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&alim15x3_pci_driver);
}
static void __exit ali15x3_ide_exit(void)
{
- return pci_unregister_driver(&driver);
+ return pci_unregister_driver(&alim15x3_pci_driver);
}
module_init(ali15x3_ide_init);
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index 824471f91bf5..81ec73134eda 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -92,7 +92,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed)
ide_timing_compute(drive, speed, &t, T, UT);
- if (peer->present) {
+ if (peer->dev_flags & IDE_DFLAG_PRESENT) {
ide_timing_compute(peer, peer->current_speed, &p, T, UT);
ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
}
@@ -319,7 +319,7 @@ static const struct pci_device_id amd74xx_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver amd74xx_pci_driver = {
.name = "AMD_IDE",
.id_table = amd74xx_pci_tbl,
.probe = amd74xx_probe,
@@ -330,12 +330,12 @@ static struct pci_driver driver = {
static int __init amd74xx_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&amd74xx_pci_driver);
}
static void __exit amd74xx_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&amd74xx_pci_driver);
}
module_init(amd74xx_ide_init);
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
index e4437034dd08..b2735d28f5cc 100644
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -182,7 +182,7 @@ static const struct pci_device_id atiixp_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver atiixp_pci_driver = {
.name = "ATIIXP_IDE",
.id_table = atiixp_pci_tbl,
.probe = atiixp_init_one,
@@ -193,12 +193,12 @@ static struct pci_driver driver = {
static int __init atiixp_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&atiixp_pci_driver);
}
static void __exit atiixp_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&atiixp_pci_driver);
}
module_init(atiixp_ide_init);
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 7f39cdb41410..e4306647d00d 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -378,13 +378,13 @@ static void __set_prefetch_mode(ide_drive_t *drive, int mode)
{
if (mode) { /* want prefetch on? */
#if CMD640_PREFETCH_MASKS
- drive->no_unmask = 1;
- drive->unmask = 0;
+ drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
+ drive->dev_flags &= ~IDE_DFLAG_UNMASK;
#endif
- drive->no_io_32bit = 0;
+ drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;
} else {
- drive->no_unmask = 0;
- drive->no_io_32bit = 1;
+ drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
+ drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;
drive->io_32bit = 0;
}
}
@@ -468,10 +468,10 @@ static void program_drive_counts(ide_drive_t *drive, unsigned int index)
*/
if (index > 1) {
ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *peer = &hwif->drives[!drive->select.b.unit];
+ ide_drive_t *peer = &hwif->drives[!(drive->dn & 1)];
unsigned int mate = index ^ 1;
- if (peer->present) {
+ if (peer->dev_flags & IDE_DFLAG_PRESENT) {
if (setup_count < setup_counts[mate])
setup_count = setup_counts[mate];
if (active_count < active_counts[mate])
@@ -607,7 +607,7 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
static void cmd640_init_dev(ide_drive_t *drive)
{
- unsigned int i = drive->hwif->channel * 2 + drive->select.b.unit;
+ unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1);
#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
/*
@@ -626,7 +626,7 @@ static void cmd640_init_dev(ide_drive_t *drive)
*/
check_prefetch(drive, i);
printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n",
- i, drive->no_io_32bit ? "off" : "on");
+ i, (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) ? "off" : "on");
#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
}
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 456dee18b660..935385c77e06 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -228,7 +228,7 @@ static int cmd648_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = hwif->dma_base - (hwif->channel * 8);
- int err = __ide_dma_end(drive);
+ int err = ide_dma_end(drive);
u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
MRDMODE_INTR_CH0;
u8 mrdmode = inb(base + 1);
@@ -248,7 +248,7 @@ static int cmd64x_dma_end(ide_drive_t *drive)
u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
CFR_INTR_CH0;
u8 irq_stat = 0;
- int err = __ide_dma_end(drive);
+ int err = ide_dma_end(drive);
(void) pci_read_config_byte(dev, irq_reg, &irq_stat);
/* clear the interrupt bit */
@@ -505,7 +505,7 @@ static const struct pci_device_id cmd64x_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver cmd64x_pci_driver = {
.name = "CMD64x_IDE",
.id_table = cmd64x_pci_tbl,
.probe = cmd64x_init_one,
@@ -516,12 +516,12 @@ static struct pci_driver driver = {
static int __init cmd64x_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cmd64x_pci_driver);
}
static void __exit cmd64x_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&cmd64x_pci_driver);
}
module_init(cmd64x_ide_init);
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index d6341f7c4144..5efb467f8fa0 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -145,7 +145,7 @@ static const struct pci_device_id cs5520_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver cs5520_pci_driver = {
.name = "Cyrix_IDE",
.id_table = cs5520_pci_tbl,
.probe = cs5520_init_one,
@@ -155,7 +155,7 @@ static struct pci_driver driver = {
static int __init cs5520_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cs5520_pci_driver);
}
module_init(cs5520_ide_init);
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index da42fa7e9f97..53f079cc00af 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -267,7 +267,7 @@ static const struct pci_device_id cs5530_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver cs5530_pci_driver = {
.name = "CS5530 IDE",
.id_table = cs5530_pci_tbl,
.probe = cs5530_init_one,
@@ -278,12 +278,12 @@ static struct pci_driver driver = {
static int __init cs5530_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cs5530_pci_driver);
}
static void __exit cs5530_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&cs5530_pci_driver);
}
module_init(cs5530_ide_init);
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
index 1e5bc59ea2fb..983d957a0189 100644
--- a/drivers/ide/pci/cs5535.c
+++ b/drivers/ide/pci/cs5535.c
@@ -76,7 +76,7 @@ static unsigned int cs5535_udma_timings[5] =
static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
{
u32 reg = 0, dummy;
- int unit = drive->select.b.unit;
+ u8 unit = drive->dn & 1;
/* Set the PIO timings */
if (speed < XFER_SW_DMA_0) {
@@ -192,7 +192,7 @@ static const struct pci_device_id cs5535_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver cs5535_pci_driver = {
.name = "CS5535_IDE",
.id_table = cs5535_pci_tbl,
.probe = cs5535_init_one,
@@ -203,12 +203,12 @@ static struct pci_driver driver = {
static int __init cs5535_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cs5535_pci_driver);
}
static void __exit cs5535_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&cs5535_pci_driver);
}
module_init(cs5535_ide_init);
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 69820e9224d1..5297f07d2933 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -50,18 +50,11 @@
#define DRV_NAME "cy82c693"
-/* the current version */
-#define CY82_VERSION "CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)"
-
/*
* The following are used to debug the driver.
*/
-#define CY82C693_DEBUG_LOGS 0
#define CY82C693_DEBUG_INFO 0
-/* define CY82C693_SETDMA_CLOCK to set DMA Controller Clock Speed to ATCLK */
-#undef CY82C693_SETDMA_CLOCK
-
/*
* NOTE: the value for busmaster timeout is tricky and I got it by
* trial and error! By using a to low value will cause DMA timeouts
@@ -89,7 +82,6 @@
#define CY82_INDEX_PORT 0x22
#define CY82_DATA_PORT 0x23
-#define CY82_INDEX_CTRLREG1 0x01
#define CY82_INDEX_CHANNEL0 0x30
#define CY82_INDEX_CHANNEL1 0x31
#define CY82_INDEX_TIMEOUT 0x32
@@ -179,17 +171,6 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
-#if CY82C693_DEBUG_LOGS
- /* for debug let's show the previous values */
-
- outb(index, CY82_INDEX_PORT);
- data = inb(CY82_DATA_PORT);
-
- printk(KERN_INFO "%s (ch=%d, dev=%d): DMA mode is %d (single=%d)\n",
- drive->name, HWIF(drive)->channel, drive->select.b.unit,
- (data&0x3), ((data>>2)&1));
-#endif /* CY82C693_DEBUG_LOGS */
-
data = (mode & 3) | (single << 2);
outb(index, CY82_INDEX_PORT);
@@ -197,8 +178,7 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
#if CY82C693_DEBUG_INFO
printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
- drive->name, HWIF(drive)->channel, drive->select.b.unit,
- mode & 3, single);
+ drive->name, hwif->channel, drive->dn & 1, mode & 3, single);
#endif /* CY82C693_DEBUG_INFO */
/*
@@ -239,50 +219,11 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
}
}
-#if CY82C693_DEBUG_LOGS
- /* for debug let's show the register values */
-
- if (drive->select.b.unit == 0) {
- /*
- * get master drive registers
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
- addrCtrl &= 0x0F;
-
- /* now let's get the remaining registers */
- pci_read_config_byte(dev, CY82_IDE_MASTER_IOR, &pclk.time_16r);
- pci_read_config_byte(dev, CY82_IDE_MASTER_IOW, &pclk.time_16w);
- pci_read_config_byte(dev, CY82_IDE_MASTER_8BIT, &pclk.time_8);
- } else {
- /*
- * set slave drive registers
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
- addrCtrl &= 0xF0;
- addrCtrl >>= 4;
-
- /* now let's get the remaining registers */
- pci_read_config_byte(dev, CY82_IDE_SLAVE_IOR, &pclk.time_16r);
- pci_read_config_byte(dev, CY82_IDE_SLAVE_IOW, &pclk.time_16w);
- pci_read_config_byte(dev, CY82_IDE_SLAVE_8BIT, &pclk.time_8);
- }
-
- printk(KERN_INFO "%s (ch=%d, dev=%d): PIO timing is "
- "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
- drive->name, hwif->channel, drive->select.b.unit,
- addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
-#endif /* CY82C693_DEBUG_LOGS */
-
/* let's calc the values for this PIO mode */
compute_clocks(pio, &pclk);
/* now let's write the clocks registers */
- if (drive->select.b.unit == 0) {
+ if ((drive->dn & 1) == 0) {
/*
* set master drive
* address setup control register
@@ -324,63 +265,11 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
#if CY82C693_DEBUG_INFO
printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to "
"(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
- drive->name, hwif->channel, drive->select.b.unit,
+ drive->name, hwif->channel, drive->dn & 1,
addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
#endif /* CY82C693_DEBUG_INFO */
}
-/*
- * this function is called during init and is used to setup the cy82c693 chip
- */
-static unsigned int init_chipset_cy82c693(struct pci_dev *dev)
-{
- if (PCI_FUNC(dev->devfn) != 1)
- return 0;
-
-#ifdef CY82C693_SETDMA_CLOCK
- u8 data = 0;
-#endif /* CY82C693_SETDMA_CLOCK */
-
- /* write info about this verion of the driver */
- printk(KERN_INFO CY82_VERSION "\n");
-
-#ifdef CY82C693_SETDMA_CLOCK
- /* okay let's set the DMA clock speed */
-
- outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT);
- data = inb(CY82_DATA_PORT);
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO DRV_NAME ": Peripheral Configuration Register: 0x%X\n",
- data);
-#endif /* CY82C693_DEBUG_INFO */
-
- /*
- * for some reason sometimes the DMA controller
- * speed is set to ATCLK/2 ???? - we fix this here
- *
- * note: i don't know what causes this strange behaviour,
- * but even changing the dma speed doesn't solve it :-(
- * the ide performance is still only half the normal speed
- *
- * if anybody knows what goes wrong with my machine, please
- * let me know - ASK
- */
-
- data |= 0x03;
-
- outb(CY82_INDEX_CTRLREG1, CY82_INDEX_PORT);
- outb(data, CY82_DATA_PORT);
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO ": New Peripheral Configuration Register: 0x%X\n",
- data);
-#endif /* CY82C693_DEBUG_INFO */
-
-#endif /* CY82C693_SETDMA_CLOCK */
- return 0;
-}
-
static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
{
static ide_hwif_t *primary;
@@ -401,7 +290,6 @@ static const struct ide_port_ops cy82c693_port_ops = {
static const struct ide_port_info cy82c693_chipset __devinitdata = {
.name = DRV_NAME,
- .init_chipset = init_chipset_cy82c693,
.init_iops = init_iops_cy82c693,
.port_ops = &cy82c693_port_ops,
.chipset = ide_cy82c693,
@@ -443,7 +331,7 @@ static const struct pci_device_id cy82c693_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver cy82c693_pci_driver = {
.name = "Cypress_IDE",
.id_table = cy82c693_pci_tbl,
.probe = cy82c693_init_one,
@@ -454,12 +342,12 @@ static struct pci_driver driver = {
static int __init cy82c693_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&cy82c693_pci_driver);
}
static void __exit cy82c693_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&cy82c693_pci_driver);
}
module_init(cy82c693_ide_init);
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index 83b63b365e51..8689a706f537 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -117,7 +117,7 @@ static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
};
MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver delkin_cb_pci_driver = {
.name = "Delkin-ASKA-Workbit Cardbus IDE",
.id_table = delkin_cb_pci_tbl,
.probe = delkin_cb_probe,
@@ -126,12 +126,12 @@ static struct pci_driver driver = {
static int __init delkin_cb_init(void)
{
- return pci_register_driver(&driver);
+ return pci_register_driver(&delkin_cb_pci_driver);
}
static void __exit delkin_cb_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&delkin_cb_pci_driver);
}
module_init(delkin_cb_init);
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
index 092b238cb250..474f96a7c076 100644
--- a/drivers/ide/pci/generic.c
+++ b/drivers/ide/pci/generic.c
@@ -166,7 +166,7 @@ static const struct pci_device_id generic_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, generic_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver generic_pci_driver = {
.name = "PCI_IDE",
.id_table = generic_pci_tbl,
.probe = generic_init_one,
@@ -177,12 +177,12 @@ static struct pci_driver driver = {
static int __init generic_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&generic_pci_driver);
}
static void __exit generic_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&generic_pci_driver);
}
module_init(generic_ide_init);
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index 644de29f8fe4..fb1a3aa57f07 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -166,7 +166,7 @@ static const struct pci_device_id hpt34x_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, hpt34x_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver hpt34x_pci_driver = {
.name = "HPT34x_IDE",
.id_table = hpt34x_pci_tbl,
.probe = hpt34x_init_one,
@@ -177,12 +177,12 @@ static struct pci_driver driver = {
static int __init hpt34x_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&hpt34x_pci_driver);
}
static void __exit hpt34x_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&hpt34x_pci_driver);
}
module_init(hpt34x_ide_init);
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index a194022b6a61..9cf171cb9376 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -835,7 +835,7 @@ static int hpt370_dma_end(ide_drive_t *drive)
if (dma_stat & 0x01)
hpt370_irq_timeout(drive);
}
- return __ide_dma_end(drive);
+ return ide_dma_end(drive);
}
static void hpt370_dma_timeout(ide_drive_t *drive)
@@ -863,9 +863,6 @@ static int hpt374_dma_test_irq(ide_drive_t *drive)
if (dma_stat & 4)
return 1;
- if (!drive->waiting_for_dma)
- printk(KERN_WARNING "%s: (%s) called while not waiting\n",
- drive->name, __func__);
return 0;
}
@@ -880,7 +877,7 @@ static int hpt374_dma_end(ide_drive_t *drive)
pci_read_config_byte(dev, mcr_addr, &mcr);
if (bwsr & mask)
pci_write_config_byte(dev, mcr_addr, mcr | 0x30);
- return __ide_dma_end(drive);
+ return ide_dma_end(drive);
}
/**
@@ -1456,7 +1453,7 @@ static const struct ide_dma_ops hpt36x_dma_ops = {
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = hpt366_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
@@ -1622,7 +1619,7 @@ static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
};
MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver hpt366_pci_driver = {
.name = "HPT366_IDE",
.id_table = hpt366_pci_tbl,
.probe = hpt366_init_one,
@@ -1633,12 +1630,12 @@ static struct pci_driver driver = {
static int __init hpt366_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&hpt366_pci_driver);
}
static void __exit hpt366_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&hpt366_pci_driver);
}
module_init(hpt366_ide_init);
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index 0954ccd08d6f..7c2feeb3c5ec 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -189,7 +189,7 @@ static const struct pci_device_id it8213_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, it8213_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver it8213_pci_driver = {
.name = "ITE8213_IDE",
.id_table = it8213_pci_tbl,
.probe = it8213_init_one,
@@ -200,12 +200,12 @@ static struct pci_driver driver = {
static int __init it8213_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&it8213_pci_driver);
}
static void __exit it8213_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&it8213_pci_driver);
}
module_init(it8213_ide_init);
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 46edd083b348..995e18bb3139 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -138,8 +138,7 @@ static void it821x_program_udma(ide_drive_t *drive, u16 timing)
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
int channel = hwif->channel;
- int unit = drive->select.b.unit;
- u8 conf;
+ u8 unit = drive->dn & 1, conf;
/* Program UDMA timing bits */
if(itdev->clock_mode == ATA_66)
@@ -168,13 +167,11 @@ static void it821x_clock_strategy(ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
+ ide_drive_t *pair;
+ int clock, altclock, sel = 0;
+ u8 unit = drive->dn & 1, v;
- u8 unit = drive->select.b.unit;
- ide_drive_t *pair = &hwif->drives[1-unit];
-
- int clock, altclock;
- u8 v;
- int sel = 0;
+ pair = &hwif->drives[1 - unit];
if(itdev->want[0][0] > itdev->want[1][0]) {
clock = itdev->want[0][1];
@@ -240,16 +237,17 @@ static void it821x_clock_strategy(ide_drive_t *drive)
static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int unit = drive->select.b.unit;
- ide_drive_t *pair = &hwif->drives[1 - unit];
- u8 set_pio = pio;
+ ide_drive_t *pair;
+ u8 unit = drive->dn & 1, set_pio = pio;
/* Spec says 89 ref driver uses 88 */
static u16 pio_timings[]= { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 };
static u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY };
+ pair = &hwif->drives[1 - unit];
+
/*
* Compute the best PIO mode we can for a given device. We must
* pick a speed that does not cause problems with the other device
@@ -286,9 +284,7 @@ static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = (void *)ide_get_hwifdata(hwif);
- int unit = drive->select.b.unit;
- int channel = hwif->channel;
- u8 conf;
+ u8 unit = drive->dn & 1, channel = hwif->channel, conf;
static u16 dma[] = { 0x8866, 0x3222, 0x3121 };
static u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY };
@@ -325,9 +321,7 @@ static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int unit = drive->select.b.unit;
- int channel = hwif->channel;
- u8 conf;
+ u8 unit = drive->dn & 1, channel = hwif->channel, conf;
static u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 };
static u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 };
@@ -369,7 +363,8 @@ static void it821x_dma_start(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int unit = drive->select.b.unit;
+ u8 unit = drive->dn & 1;
+
if(itdev->mwdma[unit] != MWDMA_OFF)
it821x_program(drive, itdev->mwdma[unit]);
else if(itdev->udma[unit] != UDMA_OFF && itdev->timing10)
@@ -389,9 +384,10 @@ static void it821x_dma_start(ide_drive_t *drive)
static int it821x_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
- int unit = drive->select.b.unit;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int ret = __ide_dma_end(drive);
+ int ret = ide_dma_end(drive);
+ u8 unit = drive->dn & 1;
+
if(itdev->mwdma[unit] != MWDMA_OFF)
it821x_program(drive, itdev->pio[unit]);
return ret;
@@ -454,7 +450,7 @@ static void it821x_quirkproc(ide_drive_t *drive)
* IRQ mask as we may well be in PIO (eg rev 0x10)
* for now and we know unmasking is safe on this chipset.
*/
- drive->unmask = 1;
+ drive->dev_flags |= IDE_DFLAG_UNMASK;
} else {
/*
* Perform fixups on smart mode. We need to "lose" some
@@ -680,7 +676,7 @@ static const struct pci_device_id it821x_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, it821x_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver it821x_pci_driver = {
.name = "ITE821x IDE",
.id_table = it821x_pci_tbl,
.probe = it821x_init_one,
@@ -691,12 +687,12 @@ static struct pci_driver driver = {
static int __init it821x_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&it821x_pci_driver);
}
static void __exit it821x_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&it821x_pci_driver);
}
module_init(it821x_ide_init);
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
index acd647110648..9a68433cf46d 100644
--- a/drivers/ide/pci/jmicron.c
+++ b/drivers/ide/pci/jmicron.c
@@ -149,7 +149,7 @@ static struct pci_device_id jmicron_pci_tbl[] = {
MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver jmicron_pci_driver = {
.name = "JMicron IDE",
.id_table = jmicron_pci_tbl,
.probe = jmicron_init_one,
@@ -160,12 +160,12 @@ static struct pci_driver driver = {
static int __init jmicron_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&jmicron_pci_driver);
}
static void __exit jmicron_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&jmicron_pci_driver);
}
module_init(jmicron_ide_init);
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
index 53bd645736d9..13789060f407 100644
--- a/drivers/ide/pci/ns87415.c
+++ b/drivers/ide/pci/ns87415.c
@@ -137,7 +137,7 @@ static void __devinit superio_init_iops(struct hwif_s *hwif)
static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
/*
- * This routine either enables/disables (according to drive->present)
+ * This routine either enables/disables (according to IDE_DFLAG_PRESENT)
* the IRQ associated with the port (HWIF(drive)),
* and selects either PIO or DMA handshaking for the next I/O operation.
*/
@@ -153,11 +153,15 @@ static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
/* Adjust IRQ enable bit */
bit = 1 << (8 + hwif->channel);
- new = drive->present ? (new & ~bit) : (new | bit);
+
+ if (drive->dev_flags & IDE_DFLAG_PRESENT)
+ new &= ~bit;
+ else
+ new |= bit;
/* Select PIO or DMA, DMA may only be selected for one drive/channel. */
- bit = 1 << (20 + drive->select.b.unit + (hwif->channel << 1));
- other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1));
+ bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1));
+ other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1));
new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
if (new != *old) {
@@ -187,7 +191,8 @@ static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
static void ns87415_selectproc (ide_drive_t *drive)
{
- ns87415_prepare_drive (drive, drive->using_dma);
+ ns87415_prepare_drive(drive,
+ !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
}
static int ns87415_dma_end(ide_drive_t *drive)
@@ -334,7 +339,7 @@ static const struct pci_device_id ns87415_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver ns87415_pci_driver = {
.name = "NS87415_IDE",
.id_table = ns87415_pci_tbl,
.probe = ns87415_init_one,
@@ -345,12 +350,12 @@ static struct pci_driver driver = {
static int __init ns87415_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&ns87415_pci_driver);
}
static void __exit ns87415_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&ns87415_pci_driver);
}
module_init(ns87415_ide_init);
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 3de11ddcf863..6048eda3cd61 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -179,7 +179,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
misc = addr_timings[clk][addr_pio];
/* select Index-0/1 for Register-A/B */
- write_reg(drive->select.b.unit, MISC_REG);
+ write_reg(drive->dn & 1, MISC_REG);
/* set read cycle timings */
write_reg(tim, READ_REG);
/* set write cycle timings */
@@ -220,7 +220,7 @@ static const struct pci_device_id opti621_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver opti621_pci_driver = {
.name = "Opti621_IDE",
.id_table = opti621_pci_tbl,
.probe = opti621_init_one,
@@ -231,12 +231,12 @@ static struct pci_driver driver = {
static int __init opti621_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&opti621_pci_driver);
}
static void __exit opti621_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&opti621_pci_driver);
}
module_init(opti621_ide_init);
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 9fc59962553b..211ae46e3e0c 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -561,7 +561,7 @@ static const struct pci_device_id pdc202new_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver pdc202new_pci_driver = {
.name = "Promise_IDE",
.id_table = pdc202new_pci_tbl,
.probe = pdc202new_init_one,
@@ -572,12 +572,12 @@ static struct pci_driver driver = {
static int __init pdc202new_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&pdc202new_pci_driver);
}
static void __exit pdc202new_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&pdc202new_pci_driver);
}
module_init(pdc202new_ide_init);
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index cb6d2a00c514..799557c25eef 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -168,7 +168,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive)
{
if (drive->current_speed > XFER_UDMA_2)
pdc_old_enable_66MHz_clock(drive->hwif);
- if (drive->media != ide_disk || drive->addressing == 1) {
+ if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
struct request *rq = HWGROUP(drive)->rq;
ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->extra_base - 16;
@@ -188,7 +188,7 @@ static void pdc202xx_dma_start(ide_drive_t *drive)
static int pdc202xx_dma_end(ide_drive_t *drive)
{
- if (drive->media != ide_disk || drive->addressing == 1) {
+ if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
ide_hwif_t *hwif = HWIF(drive);
unsigned long high_16 = hwif->extra_base - 16;
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
@@ -200,7 +200,7 @@ static int pdc202xx_dma_end(ide_drive_t *drive)
}
if (drive->current_speed > XFER_UDMA_2)
pdc_old_disable_66MHz_clock(drive->hwif);
- return __ide_dma_end(drive);
+ return ide_dma_end(drive);
}
static int pdc202xx_dma_test_irq(ide_drive_t *drive)
@@ -333,7 +333,7 @@ static const struct ide_dma_ops pdc20246_dma_ops = {
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = pdc202xx_dma_test_irq,
.dma_lost_irq = pdc202xx_dma_lost_irq,
.dma_timeout = pdc202xx_dma_timeout,
@@ -426,7 +426,7 @@ static const struct pci_device_id pdc202xx_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver pdc202xx_pci_driver = {
.name = "Promise_Old_IDE",
.id_table = pdc202xx_pci_tbl,
.probe = pdc202xx_init_one,
@@ -437,12 +437,12 @@ static struct pci_driver driver = {
static int __init pdc202xx_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&pdc202xx_pci_driver);
}
static void __exit pdc202xx_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&pdc202xx_pci_driver);
}
module_init(pdc202xx_ide_init);
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index a06c03f8e295..d63f9fdca76b 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -215,17 +215,26 @@ static unsigned int init_chipset_ich(struct pci_dev *dev)
}
/**
- * piix_dma_clear_irq - clear BMDMA status
- * @drive: IDE drive to clear
+ * ich_clear_irq - clear BMDMA status
+ * @drive: IDE drive
*
- * Called from ide_intr() for PIO interrupts
- * to clear BMDMA status as needed by ICHx
+ * ICHx contollers set DMA INTR no matter DMA or PIO.
+ * BMDMA status might need to be cleared even for
+ * PIO interrupts to prevent spurious/lost IRQ.
*/
-static void piix_dma_clear_irq(ide_drive_t *drive)
+static void ich_clear_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 dma_stat;
+ /*
+ * ide_dma_end() needs BMDMA status for error checking.
+ * So, skip clearing BMDMA status here and leave it
+ * to ide_dma_end() if this is DMA interrupt.
+ */
+ if (drive->waiting_for_dma || hwif->dma_base == 0)
+ return;
+
/* clear the INTR & ERROR bits */
dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
/* Should we force the bit as well ? */
@@ -249,6 +258,7 @@ static const struct ich_laptop ich_laptop[] = {
{ 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
+ { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
/* end marker */
@@ -293,21 +303,19 @@ static void __devinit init_hwif_piix(ide_hwif_t *hwif)
hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
}
-static void __devinit init_hwif_ich(ide_hwif_t *hwif)
-{
- init_hwif_piix(hwif);
-
- /* ICHx need to clear the BMDMA status for all interrupts */
- if (hwif->dma_base)
- hwif->ide_dma_clear_irq = &piix_dma_clear_irq;
-}
-
static const struct ide_port_ops piix_port_ops = {
.set_pio_mode = piix_set_pio_mode,
.set_dma_mode = piix_set_dma_mode,
.cable_detect = piix_cable_detect,
};
+static const struct ide_port_ops ich_port_ops = {
+ .set_pio_mode = piix_set_pio_mode,
+ .set_dma_mode = piix_set_dma_mode,
+ .clear_irq = ich_clear_irq,
+ .cable_detect = piix_cable_detect,
+};
+
#ifndef CONFIG_IA64
#define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS
#else
@@ -331,9 +339,9 @@ static const struct ide_port_ops piix_port_ops = {
{ \
.name = DRV_NAME, \
.init_chipset = init_chipset_ich, \
- .init_hwif = init_hwif_ich, \
+ .init_hwif = init_hwif_piix, \
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
- .port_ops = &piix_port_ops, \
+ .port_ops = &ich_port_ops, \
.host_flags = IDE_HFLAGS_PIIX, \
.pio_mask = ATA_PIO4, \
.swdma_mask = ATA_SWDMA2_ONLY, \
@@ -444,7 +452,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver piix_pci_driver = {
.name = "PIIX_IDE",
.id_table = piix_pci_tbl,
.probe = piix_init_one,
@@ -456,12 +464,12 @@ static struct pci_driver driver = {
static int __init piix_ide_init(void)
{
piix_check_450nx();
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&piix_pci_driver);
}
static void __exit piix_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&piix_pci_driver);
}
module_init(piix_ide_init);
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
index c117a068761b..7daf0135cbac 100644
--- a/drivers/ide/pci/rz1000.c
+++ b/drivers/ide/pci/rz1000.c
@@ -59,7 +59,7 @@ static const struct pci_device_id rz1000_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver rz1000_pci_driver = {
.name = "RZ1000_IDE",
.id_table = rz1000_pci_tbl,
.probe = rz1000_init_one,
@@ -68,12 +68,12 @@ static struct pci_driver driver = {
static int __init rz1000_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&rz1000_pci_driver);
}
static void __exit rz1000_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&rz1000_pci_driver);
}
module_init(rz1000_ide_init);
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
index bdc1fed41260..f1a8758e3a99 100644
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -126,7 +126,6 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- int unit = drive->select.b.unit;
unsigned int reg, timings;
unsigned short pci_clock;
unsigned int basereg = hwif->channel ? 0x50 : 0x40;
@@ -155,7 +154,7 @@ static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
else
timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];
- if (unit == 0) { /* are we configuring drive0? */
+ if ((drive->dn & 1) == 0) {
pci_read_config_dword(dev, basereg + 4, &reg);
timings |= reg & 0x80000000; /* preserve PIO format bit */
pci_write_config_dword(dev, basereg + 4, timings);
@@ -216,7 +215,8 @@ static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
if (mode != -1) {
printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
ide_dma_off_quietly(drive);
- if (ide_set_dma_mode(drive, mode) == 0 && drive->using_dma)
+ if (ide_set_dma_mode(drive, mode) == 0 &&
+ (drive->dev_flags & IDE_DFLAG_USING_DMA))
hwif->dma_ops->dma_host_set(drive, 1);
return;
}
@@ -328,7 +328,7 @@ static const struct pci_device_id sc1200_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver sc1200_pci_driver = {
.name = "SC1200_IDE",
.id_table = sc1200_pci_tbl,
.probe = sc1200_init_one,
@@ -341,12 +341,12 @@ static struct pci_driver driver = {
static int __init sc1200_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&sc1200_pci_driver);
}
static void __exit sc1200_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&sc1200_pci_driver);
}
module_init(sc1200_ide_init);
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index e92a874b31df..9ce1d8059921 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -291,7 +291,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
static void scc_dma_host_set(ide_drive_t *drive, int on)
{
ide_hwif_t *hwif = drive->hwif;
- u8 unit = (drive->select.b.unit & 0x01);
+ u8 unit = drive->dn & 1;
u8 dma_stat = scc_ide_inb(hwif->dma_base + 4);
if (on)
@@ -353,7 +353,6 @@ static void scc_dma_start(ide_drive_t *drive)
/* start DMA */
scc_ide_outb(dma_cmd | 1, hwif->dma_base);
- hwif->dma = 1;
wmb();
}
@@ -374,7 +373,6 @@ static int __scc_dma_end(ide_drive_t *drive)
/* purge DMA mappings */
ide_destroy_dmatable(drive);
/* verify good DMA status */
- hwif->dma = 0;
wmb();
return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
}
@@ -511,9 +509,6 @@ static int scc_dma_test_irq(ide_drive_t *drive)
if (int_stat & INTSTS_IOIRQS)
return 1;
- if (!drive->waiting_for_dma)
- printk(KERN_WARNING "%s: (%s) called while not waiting\n",
- drive->name, __func__);
return 0;
}
@@ -710,7 +705,7 @@ static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
scc_ide_outb(tf->lbah, io_ports->lbah_addr);
if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- scc_ide_outb((tf->device & HIHI) | drive->select.all,
+ scc_ide_outb((tf->device & HIHI) | drive->select,
io_ports->device_addr);
}
@@ -826,6 +821,12 @@ static void __devinit init_iops_scc(ide_hwif_t *hwif)
init_mmio_iops_scc(hwif);
}
+static int __devinit scc_init_dma(ide_hwif_t *hwif,
+ const struct ide_port_info *d)
+{
+ return ide_allocate_dma_engine(hwif);
+}
+
static u8 scc_cable_detect(ide_hwif_t *hwif)
{
return ATA_CBL_PATA80;
@@ -890,6 +891,7 @@ static const struct ide_dma_ops scc_dma_ops = {
{ \
.name = name_str, \
.init_iops = init_iops_scc, \
+ .init_dma = scc_init_dma, \
.init_hwif = init_hwif_scc, \
.tp_ops = &scc_tp_ops, \
.port_ops = &scc_port_ops, \
@@ -927,13 +929,6 @@ static void __devexit scc_remove(struct pci_dev *dev)
{
struct scc_ports *ports = pci_get_drvdata(dev);
struct ide_host *host = ports->host;
- ide_hwif_t *hwif = host->ports[0];
-
- if (hwif->dmatable_cpu) {
- pci_free_consistent(dev, PRD_ENTRIES * PRD_BYTES,
- hwif->dmatable_cpu, hwif->dmatable_dma);
- hwif->dmatable_cpu = NULL;
- }
ide_host_remove(host);
@@ -949,7 +944,7 @@ static const struct pci_device_id scc_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver scc_pci_driver = {
.name = "SCC IDE",
.id_table = scc_pci_tbl,
.probe = scc_init_one,
@@ -958,14 +953,14 @@ static struct pci_driver driver = {
static int scc_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&scc_pci_driver);
}
module_init(scc_ide_init);
/* -- No exit code?
static void scc_ide_exit(void)
{
- ide_pci_unregister_driver(&driver);
+ ide_pci_unregister_driver(&scc_pci_driver);
}
module_exit(scc_ide_exit);
*/
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index 3dff2aea317e..437bc919dafd 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -153,7 +153,7 @@ static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 unit = (drive->select.b.unit & 0x01);
+ u8 unit = drive->dn & 1;
u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
@@ -443,7 +443,7 @@ static const struct pci_device_id svwks_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver svwks_pci_driver = {
.name = "Serverworks_IDE",
.id_table = svwks_pci_tbl,
.probe = svwks_init_one,
@@ -454,12 +454,12 @@ static struct pci_driver driver = {
static int __init svwks_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&svwks_pci_driver);
}
static void __exit svwks_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&svwks_pci_driver);
}
module_init(svwks_ide_init);
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 1017fb4f6317..dd634541ce36 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -1,5 +1,6 @@
/*
* Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (C) 2008 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License
@@ -150,7 +151,7 @@ sgiioc4_clearirq(ide_drive_t * drive)
int count = 0;
stat = sgiioc4_read_status(hwif);
- while ((stat & 0x80) && (count++ < 100)) {
+ while ((stat & ATA_BUSY) && (count++ < 100)) {
udelay(1);
stat = sgiioc4_read_status(hwif);
}
@@ -310,7 +311,7 @@ static u8 sgiioc4_read_status(ide_hwif_t *hwif)
u8 reg = (u8) readb((void __iomem *) port);
if ((port & 0xFFF) == 0x11C) { /* Status register of IOC4 */
- if (reg & 0x51) { /* Not busy...check for interrupt */
+ if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */
unsigned long other_ir = port - 0x110;
unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
@@ -338,35 +339,31 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
if (dma_base == 0)
return -1;
- printk(KERN_INFO "%s: BM-DMA at 0x%04lx-0x%04lx\n", hwif->name,
- dma_base, dma_base + num_ports - 1);
+ printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
- if (!request_mem_region(dma_base, num_ports, hwif->name)) {
- printk(KERN_ERR
- "%s(%s) -- ERROR, Addresses 0x%p to 0x%p "
- "ALREADY in use\n",
- __func__, hwif->name, (void *) dma_base,
- (void *) dma_base + num_ports - 1);
+ if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
+ printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
+ "already in use\n", __func__, hwif->name,
+ dma_base, dma_base + num_ports - 1);
return -1;
}
virt_dma_base = ioremap(dma_base, num_ports);
if (virt_dma_base == NULL) {
- printk(KERN_ERR
- "%s(%s) -- ERROR, Unable to map addresses 0x%lx to 0x%lx\n",
- __func__, hwif->name, dma_base, dma_base + num_ports - 1);
+ printk(KERN_ERR "%s(%s) -- ERROR: unable to map addresses "
+ "0x%lx to 0x%lx\n", __func__, hwif->name,
+ dma_base, dma_base + num_ports - 1);
goto dma_remap_failure;
}
hwif->dma_base = (unsigned long) virt_dma_base;
- hwif->dmatable_cpu = pci_alloc_consistent(dev,
- IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
- &hwif->dmatable_dma);
+ hwif->sg_max_nents = IOC4_PRD_ENTRIES;
- if (!hwif->dmatable_cpu)
- goto dma_pci_alloc_failure;
+ hwif->prd_max_nents = IOC4_PRD_ENTRIES;
+ hwif->prd_ent_size = IOC4_PRD_BYTES;
- hwif->sg_max_nents = IOC4_PRD_ENTRIES;
+ if (ide_allocate_dma_engine(hwif))
+ goto dma_pci_alloc_failure;
pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
(dma_addr_t *)&hwif->extra_base);
@@ -375,13 +372,11 @@ ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
return 0;
}
- pci_free_consistent(dev, IOC4_PRD_ENTRIES * IOC4_PRD_BYTES,
- hwif->dmatable_cpu, hwif->dmatable_dma);
- printk(KERN_INFO
- "%s() -- Error! Unable to allocate DMA Maps for drive %s\n",
+ ide_release_dma_engine(hwif);
+
+ printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
__func__, hwif->name);
- printk(KERN_INFO
- "Changing from DMA to PIO mode for Drive %s\n", hwif->name);
+ printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
dma_pci_alloc_failure:
iounmap(virt_dma_base);
@@ -617,14 +612,12 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
- if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
- DRV_NAME)) {
- printk(KERN_ERR
- "%s %s: -- ERROR, Addresses "
- "0x%p to 0x%p ALREADY in use\n",
- DRV_NAME, pci_name(dev), (void *)cmd_phys_base,
- (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
- return -ENOMEM;
+ if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
+ DRV_NAME) == NULL) {
+ printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
+ "already in use\n", DRV_NAME, pci_name(dev),
+ cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
+ return -EBUSY;
}
/* Initialize the IO registers */
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 174a873b4c64..eb4faf92c571 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -116,13 +116,14 @@ static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = (unsigned long)hwif->hwif_data;
+ u8 unit = drive->dn & 1;
base += 0xA0 + r;
if (hwif->host_flags & IDE_HFLAG_MMIO)
base += hwif->channel << 6;
else
base += hwif->channel << 4;
- base |= drive->select.b.unit << drive->select.b.unit;
+ base |= unit << unit;
return base;
}
@@ -255,7 +256,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
: (mmio ? 0xB4 : 0x80);
u8 mode = 0;
- u8 unit = drive->select.b.unit;
+ u8 unit = drive->dn & 1;
/* trim *taskfile* PIO to the slowest of the master/slave */
if (pair) {
@@ -301,9 +302,9 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 ultra = 0, multi = 0;
- u8 mode = 0, unit = drive->select.b.unit;
unsigned long base = (unsigned long)hwif->hwif_data;
+ u16 ultra = 0, multi = 0;
+ u8 mode = 0, unit = drive->dn & 1;
u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
: (mmio ? 0xB4 : 0x80);
@@ -712,7 +713,7 @@ static const struct ide_dma_ops sil_dma_ops = {
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = ide_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = siimage_dma_test_irq,
.dma_timeout = ide_dma_timeout,
.dma_lost_irq = ide_dma_lost_irq,
@@ -829,7 +830,7 @@ static const struct pci_device_id siimage_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, siimage_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver siimage_pci_driver = {
.name = "SiI_IDE",
.id_table = siimage_pci_tbl,
.probe = siimage_init_one,
@@ -840,12 +841,12 @@ static struct pci_driver driver = {
static int __init siimage_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&siimage_pci_driver);
}
static void __exit siimage_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&siimage_pci_driver);
}
module_init(siimage_ide_init);
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 734dd41f1f67..ad32e18c5ba3 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -605,7 +605,7 @@ static const struct pci_device_id sis5513_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver sis5513_pci_driver = {
.name = "SIS_IDE",
.id_table = sis5513_pci_tbl,
.probe = sis5513_init_one,
@@ -616,12 +616,12 @@ static struct pci_driver driver = {
static int __init sis5513_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&sis5513_pci_driver);
}
static void __exit sis5513_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&sis5513_pci_driver);
}
module_init(sis5513_ide_init);
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index 37a6b7bdc040..84dc33602ff8 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -207,7 +207,7 @@ static int sl82c105_dma_end(ide_drive_t *drive)
DBG(("%s(drive:%s)\n", __func__, drive->name));
- ret = __ide_dma_end(drive);
+ ret = ide_dma_end(drive);
pci_write_config_word(dev, reg, drive->drive_data);
@@ -345,7 +345,7 @@ static const struct pci_device_id sl82c105_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver sl82c105_pci_driver = {
.name = "W82C105_IDE",
.id_table = sl82c105_pci_tbl,
.probe = sl82c105_init_one,
@@ -356,12 +356,12 @@ static struct pci_driver driver = {
static int __init sl82c105_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&sl82c105_pci_driver);
}
static void __exit sl82c105_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&sl82c105_pci_driver);
}
module_init(sl82c105_ide_init);
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
index a9551a13ac57..0f759e4ed779 100644
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -154,7 +154,7 @@ static const struct pci_device_id slc90e66_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver slc90e66_pci_driver = {
.name = "SLC90e66_IDE",
.id_table = slc90e66_pci_tbl,
.probe = slc90e66_init_one,
@@ -165,12 +165,12 @@ static struct pci_driver driver = {
static int __init slc90e66_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&slc90e66_pci_driver);
}
static void __exit slc90e66_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&slc90e66_pci_driver);
}
module_init(slc90e66_ide_init);
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 927277c54ec9..93e2cce4b296 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -186,7 +186,7 @@ static const struct ide_dma_ops tc86c001_dma_ops = {
.dma_setup = ide_dma_setup,
.dma_exec_cmd = ide_dma_exec_cmd,
.dma_start = tc86c001_dma_start,
- .dma_end = __ide_dma_end,
+ .dma_end = ide_dma_end,
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timeout = ide_dma_timeout,
@@ -245,7 +245,7 @@ static const struct pci_device_id tc86c001_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver tc86c001_pci_driver = {
.name = "TC86C001",
.id_table = tc86c001_pci_tbl,
.probe = tc86c001_init_one,
@@ -254,12 +254,12 @@ static struct pci_driver driver = {
static int __init tc86c001_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&tc86c001_pci_driver);
}
static void __exit tc86c001_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&tc86c001_pci_driver);
}
module_init(tc86c001_ide_init);
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
index be8715dcee05..b6ff40336aa9 100644
--- a/drivers/ide/pci/triflex.c
+++ b/drivers/ide/pci/triflex.c
@@ -38,13 +38,12 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 channel_offset = hwif->channel ? 0x74 : 0x70;
- u16 timing = 0;
u32 triflex_timings = 0;
- u8 unit = (drive->select.b.unit & 0x01);
-
+ u16 timing = 0;
+ u8 channel_offset = hwif->channel ? 0x74 : 0x70, unit = drive->dn & 1;
+
pci_read_config_dword(dev, channel_offset, &triflex_timings);
-
+
switch(speed) {
case XFER_MW_DMA_2:
timing = 0x0103;
@@ -114,7 +113,7 @@ static const struct pci_device_id triflex_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver triflex_pci_driver = {
.name = "TRIFLEX_IDE",
.id_table = triflex_pci_tbl,
.probe = triflex_init_one,
@@ -125,12 +124,12 @@ static struct pci_driver driver = {
static int __init triflex_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&triflex_pci_driver);
}
static void __exit triflex_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&triflex_pci_driver);
}
module_init(triflex_ide_init);
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
index 4dfbc6a68b5b..75ea61526566 100644
--- a/drivers/ide/pci/trm290.c
+++ b/drivers/ide/pci/trm290.c
@@ -161,7 +161,7 @@ static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
}
/* enable IRQ if not probing */
- if (drive->present) {
+ if (drive->dev_flags & IDE_DFLAG_PRESENT) {
reg = inw(hwif->config_data + 3);
reg &= 0x13;
reg &= ~(1 << hwif->channel);
@@ -173,7 +173,7 @@ static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
static void trm290_selectproc (ide_drive_t *drive)
{
- trm290_prepare_drive(drive, drive->using_dma);
+ trm290_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
}
static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command)
@@ -350,7 +350,7 @@ static const struct pci_device_id trm290_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, trm290_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver trm290_pci_driver = {
.name = "TRM290_IDE",
.id_table = trm290_pci_tbl,
.probe = trm290_init_one,
@@ -359,12 +359,12 @@ static struct pci_driver driver = {
static int __init trm290_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&trm290_pci_driver);
}
static void __exit trm290_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&trm290_pci_driver);
}
module_init(trm290_ide_init);
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index acacdaab69c2..2a812d3207e9 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -487,7 +487,7 @@ static const struct pci_device_id via_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, via_pci_tbl);
-static struct pci_driver driver = {
+static struct pci_driver via_pci_driver = {
.name = "VIA_IDE",
.id_table = via_pci_tbl,
.probe = via_init_one,
@@ -498,12 +498,12 @@ static struct pci_driver driver = {
static int __init via_ide_init(void)
{
- return ide_pci_register_driver(&driver);
+ return ide_pci_register_driver(&via_pci_driver);
}
static void __exit via_ide_exit(void)
{
- pci_unregister_driver(&driver);
+ pci_unregister_driver(&via_pci_driver);
}
module_init(via_ide_init);
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index c3432da78d52..2e19d6298536 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -430,10 +430,7 @@ pmac_ide_selectproc(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- if (pmif == NULL)
- return;
-
- if (drive->select.b.unit & 0x01)
+ if (drive->dn & 1)
writel(pmif->timings[1], PMAC_IDE_REG(IDE_TIMING_CONFIG));
else
writel(pmif->timings[0], PMAC_IDE_REG(IDE_TIMING_CONFIG));
@@ -452,10 +449,7 @@ pmac_ide_kauai_selectproc(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- if (pmif == NULL)
- return;
-
- if (drive->select.b.unit & 0x01) {
+ if (drive->dn & 1) {
writel(pmif->timings[1], PMAC_IDE_REG(IDE_KAUAI_PIO_CONFIG));
writel(pmif->timings[3], PMAC_IDE_REG(IDE_KAUAI_ULTRA_CONFIG));
} else {
@@ -475,9 +469,6 @@ pmac_ide_do_update_timings(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- if (pmif == NULL)
- return;
-
if (pmif->kind == controller_sh_ata6 ||
pmif->kind == controller_un_ata6 ||
pmif->kind == controller_k2_ata6)
@@ -524,11 +515,8 @@ pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
unsigned accessTime, recTime;
unsigned int cycle_time;
- if (pmif == NULL)
- return;
-
/* which drive is it ? */
- timings = &pmif->timings[drive->select.b.unit & 0x01];
+ timings = &pmif->timings[drive->dn & 1];
t = *timings;
cycle_time = ide_pio_cycle_time(drive, pio);
@@ -805,9 +793,9 @@ static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed)
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- int unit = (drive->select.b.unit & 0x01);
int ret = 0;
u32 *timings, *timings2, tl[2];
+ u8 unit = drive->dn & 1;
timings = &pmif->timings[unit];
timings2 = &pmif->timings[unit+2];
@@ -966,11 +954,11 @@ static void pmac_ide_init_dev(ide_drive_t *drive)
if (pmif->mediabay) {
#ifdef CONFIG_PMAC_MEDIABAY
if (check_media_bay_by_base(pmif->regbase, MB_CD) == 0) {
- drive->noprobe = 0;
+ drive->dev_flags &= ~IDE_DFLAG_NOPROBE;
return;
}
#endif
- drive->noprobe = 1;
+ drive->dev_flags |= IDE_DFLAG_NOPROBE;
}
}
@@ -1535,18 +1523,6 @@ use_pio_instead:
return 0; /* revert to PIO for this request */
}
-/* Teardown mappings after DMA has completed. */
-static void
-pmac_ide_destroy_dmatable (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- if (hwif->sg_nents) {
- ide_destroy_dmatable(drive);
- hwif->sg_nents = 0;
- }
-}
-
/*
* Prepare a DMA transfer. We build the DMA table, adjust the timings for
* a read on KeyLargo ATA/66 and mark us as waiting for DMA completion
@@ -1558,12 +1534,7 @@ pmac_ide_dma_setup(ide_drive_t *drive)
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
struct request *rq = HWGROUP(drive)->rq;
- u8 unit = (drive->select.b.unit & 0x01);
- u8 ata4;
-
- if (pmif == NULL)
- return 1;
- ata4 = (pmif->kind == controller_kl_ata4);
+ u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4);
if (!pmac_ide_build_dmatable(drive, rq)) {
ide_map_sg(drive, rq);
@@ -1617,17 +1588,15 @@ pmac_ide_dma_end (ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
u32 dstat;
-
- if (pmif == NULL)
- return 0;
- dma = pmif->dma_regs;
drive->waiting_for_dma = 0;
dstat = readl(&dma->status);
writel(((RUN|WAKE|DEAD) << 16), &dma->control);
- pmac_ide_destroy_dmatable(drive);
+
+ ide_destroy_dmatable(drive);
+
/* verify good dma status. we don't check for ACTIVE beeing 0. We should...
* in theory, but with ATAPI decices doing buffer underruns, that would
* cause us to disable DMA, which isn't what we want
@@ -1647,13 +1616,9 @@ pmac_ide_dma_test_irq (ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
unsigned long status, timeout;
- if (pmif == NULL)
- return 0;
- dma = pmif->dma_regs;
-
/* We have to things to deal with here:
*
* - The dbdma won't stop if the command was started
@@ -1672,9 +1637,6 @@ pmac_ide_dma_test_irq (ide_drive_t *drive)
status = readl(&dma->status);
if (!(status & ACTIVE))
return 1;
- if (!drive->waiting_for_dma)
- printk(KERN_WARNING "ide%d, ide_dma_test_irq \
- called while not waiting\n", HWIF(drive)->index);
/* If dbdma didn't execute the STOP command yet, the
* active bit is still set. We consider that we aren't
@@ -1709,14 +1671,9 @@ pmac_ide_dma_lost_irq (ide_drive_t *drive)
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
- volatile struct dbdma_regs __iomem *dma;
- unsigned long status;
-
- if (pmif == NULL)
- return;
- dma = pmif->dma_regs;
+ volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
+ unsigned long status = readl(&dma->status);
- status = readl(&dma->status);
printk(KERN_ERR "ide-pmac lost interrupt, dma status: %lx\n", status);
}
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index daa9d4220331..82ec6b1b6467 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -458,35 +458,35 @@ static int hp_sdc_rtc_proc_output (char *buf)
p += sprintf(p, "i8042 rtc\t: READ FAILED!\n");
} else {
p += sprintf(p, "i8042 rtc\t: %ld.%02d seconds\n",
- tv.tv_sec, tv.tv_usec/1000);
+ tv.tv_sec, (int)tv.tv_usec/1000);
}
if (hp_sdc_rtc_read_fhs(&tv)) {
p += sprintf(p, "handshake\t: READ FAILED!\n");
} else {
p += sprintf(p, "handshake\t: %ld.%02d seconds\n",
- tv.tv_sec, tv.tv_usec/1000);
+ tv.tv_sec, (int)tv.tv_usec/1000);
}
if (hp_sdc_rtc_read_mt(&tv)) {
p += sprintf(p, "alarm\t\t: READ FAILED!\n");
} else {
p += sprintf(p, "alarm\t\t: %ld.%02d seconds\n",
- tv.tv_sec, tv.tv_usec/1000);
+ tv.tv_sec, (int)tv.tv_usec/1000);
}
if (hp_sdc_rtc_read_dt(&tv)) {
p += sprintf(p, "delay\t\t: READ FAILED!\n");
} else {
p += sprintf(p, "delay\t\t: %ld.%02d seconds\n",
-