aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/tuners/r820t.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/tuners/r820t.c')
-rw-r--r--drivers/media/tuners/r820t.c702
1 files changed, 681 insertions, 21 deletions
diff --git a/drivers/media/tuners/r820t.c b/drivers/media/tuners/r820t.c
index 07d032350c1b..fa2e9ae48c98 100644
--- a/drivers/media/tuners/r820t.c
+++ b/drivers/media/tuners/r820t.c
@@ -47,6 +47,8 @@
*/
#define REG_SHADOW_START 5
#define NUM_REGS 27
+#define NUM_IMR 5
+#define IMR_TRIAL 9
#define VER_NUM 49
@@ -66,6 +68,12 @@ enum xtal_cap_value {
XTAL_HIGH_CAP_0P
};
+struct r820t_sect_type {
+ u8 phase_y;
+ u8 gain_x;
+ u16 value;
+};
+
struct r820t_priv {
struct list_head hybrid_tuner_instance_list;
const struct r820t_config *cfg;
@@ -80,6 +88,8 @@ struct r820t_priv {
u8 fil_cal_code;
bool imr_done;
+ struct r820t_sect_type imr_data[NUM_IMR];
+
/* Store current mode */
u32 delsys;
enum v4l2_tuner_type type;
@@ -459,7 +469,7 @@ static int r820t_set_mux(struct r820t_priv *priv, u32 freq)
{
const struct r820t_freq_range *range;
int i, rc;
- u8 val;
+ u8 val, reg08, reg09;
/* Get the proper frequency range */
freq = freq / 1000000;
@@ -507,17 +517,18 @@ static int r820t_set_mux(struct r820t_priv *priv, u32 freq)
if (rc < 0)
return rc;
- /*
- * FIXME: the original driver has a logic there with preserves
- * gain/phase from registers 8 and 9 reading the data from the
- * registers before writing, if "IMF done". That code was sort of
- * commented there, as the flag is always false.
- */
- rc = r820t_write_reg_mask(priv, 0x08, 0, 0x3f);
+ if (priv->imr_done) {
+ reg08 = priv->imr_data[range->imr_mem].gain_x;
+ reg09 = priv->imr_data[range->imr_mem].phase_y;
+ } else {
+ reg08 = 0;
+ reg09 = 0;
+ }
+ rc = r820t_write_reg_mask(priv, 0x08, reg08, 0x3f);
if (rc < 0)
return rc;
- rc = r820t_write_reg_mask(priv, 0x09, 0, 0x3f);
+ rc = r820t_write_reg_mask(priv, 0x09, reg09, 0x3f);
return rc;
}
@@ -1383,24 +1394,621 @@ static int r820t_xtal_check(struct r820t_priv *priv)
return r820t_xtal_capacitor[i][1];
}
-/*
- * r820t frontend operations and tuner attach code
- *
- * All driver locks and i2c control are only in this part of the code
- */
+static int r820t_imr_prepare(struct r820t_priv *priv)
+{
+ int rc;
-static int r820t_init(struct dvb_frontend *fe)
+ /* Initialize the shadow registers */
+ memcpy(priv->regs, r820t_init_array, sizeof(r820t_init_array));
+
+ /* lna off (air-in off) */
+ rc = r820t_write_reg_mask(priv, 0x05, 0x20, 0x20);
+ if (rc < 0)
+ return rc;
+
+ /* mixer gain mode = manual */
+ rc = r820t_write_reg_mask(priv, 0x07, 0, 0x10);
+ if (rc < 0)
+ return rc;
+
+ /* filter corner = lowest */
+ rc = r820t_write_reg_mask(priv, 0x0a, 0x0f, 0x0f);
+ if (rc < 0)
+ return rc;
+
+ /* filter bw=+2cap, hp=5M */
+ rc = r820t_write_reg_mask(priv, 0x0b, 0x60, 0x6f);
+ if (rc < 0)
+ return rc;
+
+ /* adc=on, vga code mode, gain = 26.5dB */
+ rc = r820t_write_reg_mask(priv, 0x0c, 0x0b, 0x9f);
+ if (rc < 0)
+ return rc;
+
+ /* ring clk = on */
+ rc = r820t_write_reg_mask(priv, 0x0f, 0, 0x08);
+ if (rc < 0)
+ return rc;
+
+ /* ring power = on */
+ rc = r820t_write_reg_mask(priv, 0x18, 0x10, 0x10);
+ if (rc < 0)
+ return rc;
+
+ /* from ring = ring pll in */
+ rc = r820t_write_reg_mask(priv, 0x1c, 0x02, 0x02);
+ if (rc < 0)
+ return rc;
+
+ /* sw_pdect = det3 */
+ rc = r820t_write_reg_mask(priv, 0x1e, 0x80, 0x80);
+ if (rc < 0)
+ return rc;
+
+ /* Set filt_3dB */
+ rc = r820t_write_reg_mask(priv, 0x06, 0x20, 0x20);
+
+ return rc;
+}
+
+static int r820t_multi_read(struct r820t_priv *priv)
+{
+ int rc, i;
+ u8 data[2], min = 0, max = 255, sum = 0;
+
+ usleep_range(5000, 6000);
+
+ for (i = 0; i < 6; i++) {
+ rc = r820t_read(priv, 0x00, data, sizeof(data));
+ if (rc < 0)
+ return rc;
+
+ sum += data[1];
+
+ if (data[1] < min)
+ min = data[1];
+
+ if (data[1] > max)
+ max = data[1];
+ }
+ rc = sum - max - min;
+
+ return rc;
+}
+
+static int r820t_imr_cross(struct r820t_priv *priv,
+ struct r820t_sect_type iq_point[3],
+ u8 *x_direct)
+{
+ struct r820t_sect_type cross[5]; /* (0,0)(0,Q-1)(0,I-1)(Q-1,0)(I-1,0) */
+ struct r820t_sect_type tmp;
+ int i, rc;
+ u8 reg08, reg09;
+
+ reg08 = r820t_read_cache_reg(priv, 8) & 0xc0;
+ reg09 = r820t_read_cache_reg(priv, 9) & 0xc0;
+
+ tmp.gain_x = 0;
+ tmp.phase_y = 0;
+ tmp.value = 255;
+
+ for (i = 0; i < 5; i++) {
+ switch (i) {
+ case 0:
+ cross[i].gain_x = reg08;
+ cross[i].phase_y = reg09;
+ break;
+ case 1:
+ cross[i].gain_x = reg08; /* 0 */
+ cross[i].phase_y = reg09 + 1; /* Q-1 */
+ break;
+ case 2:
+ cross[i].gain_x = reg08; /* 0 */
+ cross[i].phase_y = (reg09 | 0x20) + 1; /* I-1 */
+ break;
+ case 3:
+ cross[i].gain_x = reg08 + 1; /* Q-1 */
+ cross[i].phase_y = reg09;
+ break;
+ default:
+ cross[i].gain_x = (reg08 | 0x20) + 1; /* I-1 */
+ cross[i].phase_y = reg09;
+ }
+
+ rc = r820t_write_reg(priv, 0x08, cross[i].gain_x);
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_write_reg(priv, 0x09, cross[i].phase_y);
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_multi_read(priv);
+ if (rc < 0)
+ return rc;
+
+ cross[i].value = rc;
+
+ if (cross[i].value < tmp.value)
+ memcpy(&tmp, &cross[i], sizeof(tmp));
+ }
+
+ if ((tmp.phase_y & 0x1f) == 1) { /* y-direction */
+ *x_direct = 0;
+
+ iq_point[0] = cross[0];
+ iq_point[1] = cross[1];
+ iq_point[2] = cross[2];
+ } else { /* (0,0) or x-direction */
+ *x_direct = 1;
+
+ iq_point[0] = cross[0];
+ iq_point[1] = cross[3];
+ iq_point[2] = cross[4];
+ }
+ return 0;
+}
+
+static void r820t_compre_cor(struct r820t_sect_type iq[3])
+{
+ int i;
+
+ for (i = 3; i > 0; i--) {
+ if (iq[0].value > iq[i - 1].value)
+ swap(iq[0], iq[i - 1]);
+ }
+}
+
+static int r820t_compre_step(struct r820t_priv *priv,
+ struct r820t_sect_type iq[3], u8 reg)
+{
+ int rc;
+ struct r820t_sect_type tmp;
+
+ /*
+ * Purpose: if (Gain<9 or Phase<9), Gain+1 or Phase+1 and compare
+ * with min value:
+ * new < min => update to min and continue
+ * new > min => Exit
+ */
+
+ /* min value already saved in iq[0] */
+ tmp.phase_y = iq[0].phase_y;
+ tmp.gain_x = iq[0].gain_x;
+
+ while (((tmp.gain_x & 0x1f) < IMR_TRIAL) &&
+ ((tmp.phase_y & 0x1f) < IMR_TRIAL)) {
+ if (reg == 0x08)
+ tmp.gain_x++;
+ else
+ tmp.phase_y++;
+
+ rc = r820t_write_reg(priv, 0x08, tmp.gain_x);
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_write_reg(priv, 0x09, tmp.phase_y);
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_multi_read(priv);
+ if (rc < 0)
+ return rc;
+ tmp.value = rc;
+
+ if (tmp.value <= iq[0].value) {
+ iq[0].gain_x = tmp.gain_x;
+ iq[0].phase_y = tmp.phase_y;
+ iq[0].value = tmp.value;
+ } else {
+ return 0;
+ }
+
+ }
+
+ return 0;
+}
+
+static int r820t_iq_tree(struct r820t_priv *priv,
+ struct r820t_sect_type iq[3],
+ u8 fix_val, u8 var_val, u8 fix_reg)
+{
+ int rc, i;
+ u8 tmp, var_reg;
+
+ /*
+ * record IMC results by input gain/phase location then adjust
+ * gain or phase positive 1 step and negtive 1 step,
+ * both record results
+ */
+
+ if (fix_reg == 0x08)
+ var_reg = 0x09;
+ else
+ var_reg = 0x08;
+
+ for (i = 0; i < 3; i++) {
+ rc = r820t_write_reg(priv, fix_reg, fix_val);
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_write_reg(priv, var_reg, var_val);
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_multi_read(priv);
+ if (rc < 0)
+ return rc;
+ iq[i].value = rc;
+
+ if (fix_reg == 0x08) {
+ iq[i].gain_x = fix_val;
+ iq[i].phase_y = var_val;
+ } else {
+ iq[i].phase_y = fix_val;
+ iq[i].gain_x = var_val;
+ }
+
+ if (i == 0) { /* try right-side point */
+ var_val++;
+ } else if (i == 1) { /* try left-side point */
+ /* if absolute location is 1, change I/Q direction */
+ if ((var_val & 0x1f) < 0x02) {
+ tmp = 2 - (var_val & 0x1f);
+
+ /* b[5]:I/Q selection. 0:Q-path, 1:I-path */
+ if (var_val & 0x20) {
+ var_val &= 0xc0;
+ var_val |= tmp;
+ } else {
+ var_val |= 0x20 | tmp;
+ }
+ } else {
+ var_val -= 2;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int r820t_section(struct r820t_priv *priv,
+ struct r820t_sect_type *iq_point)
+{
+ int rc;
+ struct r820t_sect_type compare_iq[3], compare_bet[3];
+
+ /* Try X-1 column and save min result to compare_bet[0] */
+ if (!(iq_point->gain_x & 0x1f))
+ compare_iq[0].gain_x = ((iq_point->gain_x) & 0xdf) + 1; /* Q-path, Gain=1 */
+ else
+ compare_iq[0].gain_x = iq_point->gain_x - 1; /* left point */
+ compare_iq[0].phase_y = iq_point->phase_y;
+
+ /* y-direction */
+ rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
+ compare_iq[0].phase_y, 0x08);
+ if (rc < 0)
+ return rc;
+
+ r820t_compre_cor(compare_iq);
+
+ compare_bet[0] = compare_iq[0];
+
+ /* Try X column and save min result to compare_bet[1] */
+ compare_iq[0].gain_x = iq_point->gain_x;
+ compare_iq[0].phase_y = iq_point->phase_y;
+
+ rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
+ compare_iq[0].phase_y, 0x08);
+ if (rc < 0)
+ return rc;
+
+ r820t_compre_cor(compare_iq);
+
+ compare_bet[1] = compare_iq[0];
+
+ /* Try X+1 column and save min result to compare_bet[2] */
+ if ((iq_point->gain_x & 0x1f) == 0x00)
+ compare_iq[0].gain_x = ((iq_point->gain_x) | 0x20) + 1; /* I-path, Gain=1 */
+ else
+ compare_iq[0].gain_x = iq_point->gain_x + 1;
+ compare_iq[0].phase_y = iq_point->phase_y;
+
+ rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
+ compare_iq[0].phase_y, 0x08);
+ if (rc < 0)
+ return rc;
+
+ r820t_compre_cor(compare_iq);
+
+ compare_bet[2] = compare_iq[0];
+
+ r820t_compre_cor(compare_bet);
+
+ *iq_point = compare_bet[0];
+
+ return 0;
+}
+
+static int r820t_vga_adjust(struct r820t_priv *priv)
+{
+ int rc;
+ u8 vga_count;
+
+ /* increase vga power to let image significant */
+ for (vga_count = 12; vga_count < 16; vga_count++) {
+ rc = r820t_write_reg_mask(priv, 0x0c, vga_count, 0x0f);
+ if (rc < 0)
+ return rc;
+
+ usleep_range(10000, 11000);
+
+ rc = r820t_multi_read(priv);
+ if (rc < 0)
+ return rc;
+
+ if (rc > 40 * 4)
+ break;
+ }
+
+ return 0;
+}
+
+static int r820t_iq(struct r820t_priv *priv, struct r820t_sect_type *iq_pont)
+{
+ struct r820t_sect_type compare_iq[3];
+ int rc;
+ u8 x_direction = 0; /* 1:x, 0:y */
+ u8 dir_reg, other_reg;
+
+ r820t_vga_adjust(priv);
+
+ rc = r820t_imr_cross(priv, compare_iq, &x_direction);
+ if (rc < 0)
+ return rc;
+
+ if (x_direction == 1) {
+ dir_reg = 0x08;
+ other_reg = 0x09;
+ } else {
+ dir_reg = 0x09;
+ other_reg = 0x08;
+ }
+
+ /* compare and find min of 3 points. determine i/q direction */
+ r820t_compre_cor(compare_iq);
+
+ /* increase step to find min value of this direction */
+ rc = r820t_compre_step(priv, compare_iq, dir_reg);
+ if (rc < 0)
+ return rc;
+
+ /* the other direction */
+ rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
+ compare_iq[0].phase_y, dir_reg);
+ if (rc < 0)
+ return rc;
+
+ /* compare and find min of 3 points. determine i/q direction */
+ r820t_compre_cor(compare_iq);
+
+ /* increase step to find min value on this direction */
+ rc = r820t_compre_step(priv, compare_iq, other_reg);
+ if (rc < 0)
+ return rc;
+
+ /* check 3 points again */
+ rc = r820t_iq_tree(priv, compare_iq, compare_iq[0].gain_x,
+ compare_iq[0].phase_y, other_reg);
+ if (rc < 0)
+ return rc;
+
+ r820t_compre_cor(compare_iq);
+
+ /* section-9 check */
+ rc = r820t_section(priv, compare_iq);
+
+ *iq_pont = compare_iq[0];
+
+ /* reset gain/phase control setting */
+ rc = r820t_write_reg_mask(priv, 0x08, 0, 0x3f);
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_write_reg_mask(priv, 0x09, 0, 0x3f);
+
+ return rc;
+}
+
+static int r820t_f_imr(struct r820t_priv *priv, struct r820t_sect_type *iq_pont)
+{
+ int rc;
+
+ r820t_vga_adjust(priv);
+
+ /*
+ * search surrounding points from previous point
+ * try (x-1), (x), (x+1) columns, and find min IMR result point
+ */
+ rc = r820t_section(priv, iq_pont);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
+static int r820t_imr(struct r820t_priv *priv, unsigned imr_mem, bool im_flag)
+{
+ struct r820t_sect_type imr_point;
+ int rc;
+ u32 ring_vco, ring_freq, ring_ref;
+ u8 n_ring, n;
+ int reg18, reg19, reg1f;
+
+ if (priv->cfg->xtal > 24000000)
+ ring_ref = priv->cfg->xtal / 2;
+ else
+ ring_ref = priv->cfg->xtal;
+
+ for (n = 0; n < 16; n++) {
+ if ((16 + n) * 8 * ring_ref >= 3100000) {
+ n_ring = n;
+ break;
+ }
+
+ /* n_ring not found */
+ if (n == 15)
+ n_ring = n;
+ }
+
+ reg18 = r820t_read_cache_reg(priv, 0x18);
+ reg19 = r820t_read_cache_reg(priv, 0x19);
+ reg1f = r820t_read_cache_reg(priv, 0x1f);
+
+ reg18 &= 0xf0; /* set ring[3:0] */
+ reg18 |= n_ring;
+
+ ring_vco = (16 + n_ring) * 8 * ring_ref;
+
+ reg18 &= 0xdf; /* clear ring_se23 */
+ reg19 &= 0xfc; /* clear ring_seldiv */
+ reg1f &= 0xfc; /* clear ring_att */
+
+ switch (imr_mem) {
+ case 0:
+ ring_freq = ring_vco / 48;
+ reg18 |= 0x20; /* ring_se23 = 1 */
+ reg19 |= 0x03; /* ring_seldiv = 3 */
+ reg1f |= 0x02; /* ring_att 10 */
+ break;
+ case 1:
+ ring_freq = ring_vco / 16;
+ reg18 |= 0x00; /* ring_se23 = 0 */
+ reg19 |= 0x02; /* ring_seldiv = 2 */
+ reg1f |= 0x00; /* pw_ring 00 */
+ break;
+ case 2:
+ ring_freq = ring_vco / 8;
+ reg18 |= 0x00; /* ring_se23 = 0 */
+ reg19 |= 0x01; /* ring_seldiv = 1 */
+ reg1f |= 0x03; /* pw_ring 11 */
+ break;
+ case 3:
+ ring_freq = ring_vco / 6;
+ reg18 |= 0x20; /* ring_se23 = 1 */
+ reg19 |= 0x00; /* ring_seldiv = 0 */
+ reg1f |= 0x03; /* pw_ring 11 */
+ break;
+ case 4:
+ ring_freq = ring_vco / 4;
+ reg18 |= 0x00; /* ring_se23 = 0 */
+ reg19 |= 0x00; /* ring_seldiv = 0 */
+ reg1f |= 0x01; /* pw_ring 01 */
+ break;
+ default:
+ ring_freq = ring_vco / 4;
+ reg18 |= 0x00; /* ring_se23 = 0 */
+ reg19 |= 0x00; /* ring_seldiv = 0 */
+ reg1f |= 0x01; /* pw_ring 01 */
+ break;
+ }
+
+
+ /* write pw_ring, n_ring, ringdiv2 registers */
+
+ /* n_ring, ring_se23 */
+ rc = r820t_write_reg(priv, 0x18, reg18);
+ if (rc < 0)
+ return rc;
+
+ /* ring_sediv */
+ rc = r820t_write_reg(priv, 0x19, reg19);
+ if (rc < 0)
+ return rc;
+
+ /* pw_ring */
+ rc = r820t_write_reg(priv, 0x1f, reg1f);
+ if (rc < 0)
+ return rc;
+
+ /* mux input freq ~ rf_in freq */
+ rc = r820t_set_mux(priv, (ring_freq - 5300) * 1000);
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_set_pll(priv, V4L2_TUNER_DIGITAL_TV,
+ (ring_freq - 5300) * 1000);
+ if (!priv->has_lock)
+ rc = -EINVAL;
+ if (rc < 0)
+ return rc;
+
+ if (im_flag) {
+ rc = r820t_iq(priv, &imr_point);
+ } else {
+ imr_point.gain_x = priv->imr_data[3].gain_x;
+ imr_point.phase_y = priv->imr_data[3].phase_y;
+ imr_point.value = priv->imr_data[3].value;
+
+ rc = r820t_f_imr(priv, &imr_point);
+ }
+ if (rc < 0)
+ return rc;
+
+ /* save IMR value */
+ switch (imr_mem) {
+ case 0:
+ priv->imr_data[0].gain_x = imr_point.gain_x;
+ priv->imr_data[0].phase_y = imr_point.phase_y;
+ priv->imr_data[0].value = imr_point.value;
+ break;
+ case 1:
+ priv->imr_data[1].gain_x = imr_point.gain_x;
+ priv->imr_data[1].phase_y = imr_point.phase_y;
+ priv->imr_data[1].value = imr_point.value;
+ break;
+ case 2:
+ priv->imr_data[2].gain_x = imr_point.gain_x;
+ priv->imr_data[2].phase_y = imr_point.phase_y;
+ priv->imr_data[2].value = imr_point.value;
+ break;
+ case 3:
+ priv->imr_data[3].gain_x = imr_point.gain_x;
+ priv->imr_data[3].phase_y = imr_point.phase_y;
+ priv->imr_data[3].value = imr_point.value;
+ break;
+ case 4:
+ priv->imr_data[4].gain_x = imr_point.gain_x;
+ priv->imr_data[4].phase_y = imr_point.phase_y;
+ priv->imr_data[4].value = imr_point.value;
+ break;
+ default:
+ priv->imr_data[4].gain_x = imr_point.gain_x;
+ priv->imr_data[4].phase_y = imr_point.phase_y;
+ priv->imr_data[4].value = imr_point.value;
+ break;
+ }
+
+ return 0;
+}
+
+static int r820t_imr_callibrate(struct r820t_priv *priv)
{
- struct r820t_priv *priv = fe->tuner_priv;
int rc, i;
int xtal_cap = 0;
- tuner_dbg("%s:\n", __func__);
+ if (priv->imr_done)
+ return 0;
- mutex_lock(&priv->lock);
- if (fe->ops.i2c_gate_ctrl)
- fe->ops.i2c_gate_ctrl(fe, 1);
+ /* Initialize registers */
+ rc = r820t_write(priv, 0x05,
+ r820t_init_array, sizeof(r820t_init_array));
+ if (rc < 0)
+ return rc;
+ /* Detect Xtal capacitance */
if ((priv->cfg->rafael_chip == CHIP_R820T) ||
(priv->cfg->rafael_chip == CHIP_R828S) ||
(priv->cfg->rafael_chip == CHIP_R820C)) {
@@ -1409,7 +2017,7 @@ static int r820t_init(struct dvb_frontend *fe)
for (i = 0; i < 3; i++) {
rc = r820t_xtal_check(priv);
if (rc < 0)
- goto err;
+ return rc;
if (!i || rc > xtal_cap)
xtal_cap = rc;
}
@@ -1419,6 +2027,58 @@ static int r820t_init(struct dvb_frontend *fe)
/* Initialize registers */
rc = r820t_write(priv, 0x05,
r820t_init_array, sizeof(r820t_init_array));
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_imr_prepare(priv);
+ if (rc < 0)
+ return rc;
+
+ rc = r820t_imr(priv, 3, true);
+ if (rc < 0)
+ return rc;
+ rc = r820t_imr(priv, 1, false);
+ if (rc < 0)
+ return rc;
+ rc = r820t_imr(priv, 0, false);
+ if (rc < 0)
+ return rc;
+ rc = r820t_imr(priv, 2, false);
+ if (rc < 0)
+ return rc;
+ rc = r820t_imr(priv, 4, false);
+ if (rc < 0)
+ return rc;
+
+ priv->imr_done = true;
+
+ return 0;
+}
+
+/*
+ * r820t frontend operations and tuner attach code
+ *
+ * All driver locks and i2c control are only in this part of the code
+ */
+
+static int r820t_init(struct dvb_frontend *fe)
+{
+ struct r820t_priv *priv = fe->tuner_priv;
+ int rc;
+
+ tuner_dbg("%s:\n", __func__);
+
+ mutex_lock(&priv->lock);
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ rc = r820t_imr_callibrate(priv);
+ if (rc < 0)
+ goto err;
+
+ /* Initialize registers */
+ rc = r820t_write(priv, 0x05,
+ r820t_init_array, sizeof(r820t_init_array));
err:
if (fe->ops.i2c_gate_ctrl)

Privacy Policy