AgeCommit message (Collapse)AuthorFilesLines
2009-02-08Linux 2.6.29-rc4v2.6.29-rc4Linus Torvalds1-1/+1
2009-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-updateLinus Torvalds3-18/+76
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-update: async: use list_move_tail async: Rename _special -> _domain for clarity. async: Add some documentation. async: Handle kthread_run() return codes. async: Fix running list handling.
2009-02-08radeonfb: Fix resume from D3Cold on some platformsBenjamin Herrenschmidt2-67/+20
For historical reason, this driver used its own saving/restoring of the PCI config space, and used the state of it on resume as an indication as to whether it needed to re-POST the chip or not. This methods breaks with the later core changes since the core will have restored things for us. This patch fixes it by removing that custom code, using standard core methods to save/restore state, and testing for the need to re-POST by comparing the content of a few key PLL registers. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-08aty128fb: Properly save PCI state before changing PCI PM levelBenjamin Herrenschmidt1-10/+15
This fixes aty128fb to properly save the PCI config space -before- it potentially switches the PM state of the chip. This avoids a warning with the new PM core and is the right thing to do anyway. I also replaced the hand-coded switch to D2 with a call to the genericc pci_set_power_state() and removed the code that switches it back to D0 since the generic code is doing that for us nowadays. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-08atyfb: Properly save PCI state before changing PCI PM levelBenjamin Herrenschmidt1-5/+15
This fixes atyfb to properly save the PCI config space -before- it potentially switches the PM state of the chip. This avoids a warning with the new PM core and is the right thing to do anyway. I also slightly cleaned up the code that checks whether we are running on a PowerMac to do a runtime check instead of a compile check only, and replaced a deprecated number with the proper symbolic constant. Finally, I removed the useless switch to D0 from resume since the core does it for us. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-08async: use list_move_tailStefan Richter1-2/+1
list.h provides a dedicated primitive for "list_del followed by list_add_tail"... list_move_tail. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-08async: Rename _special -> _domain for clarity.Cornelia Huck3-24/+29
Rename the async_*_special() functions to async_*_domain(), which describes the purpose of these functions much better. [Broke up long lines to silence checkpatch] Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-02-08async: Add some documentation.Cornelia Huck1-0/+47
Add some kerneldoc to the async interface. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-02-08async: Handle kthread_run() return codes.Cornelia Huck1-2/+9
If we fail to create the manager thread, fall back to non-fastboot. If we fail to create an async thread, try again after waiting for a bit. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-02-08async: Fix running list handling.Cornelia Huck1-2/+2
async_schedule() should pass in async_running as the running list, and run_one_entry() should put the entry to be run on the provided running list instead of always on the generic one. Reported-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-02-07Merge branch 'for-linus' of ↵Linus Torvalds10-87/+132
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI PM: make the PM core more careful with drivers using the new PM framework PCI PM: Read power state from device after trying to change it on resume PCI PM: Do not disable and enable bridges during suspend-resume PCI: PCIe portdrv: Simplify suspend and resume PCI PM: Fix saving of device state in pci_legacy_suspend PCI PM: Check if the state has been saved before trying to restore it PCI PM: Fix handling of devices without drivers PCI: return error on failure to read PCI ROMs PCI: properly clean up ASPM link state on device remove
2009-02-07module: remove over-zealous check in __module_get()Rusty Russell1-1/+0
Impact: fix spurious BUG_ON() triggered under load module_refcount() isn't reliable outside stop_machine(), as demonstrated by Karsten Keil <kkeil@suse.de>, networking can trigger it under load (an inc on one cpu and dec on another while module_refcount() is tallying can give false results, for example). Almost noone should be using __module_get, but that's another issue. Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-07Merge branch 'release' of ↵Linus Torvalds24-901/+481
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (30 commits) ACPI: Kconfig text - Fix the ACPI_CONTAINER module name according to the real module name. eeepc-laptop: fix oops when changing backlight brightness during eeepc-laptop init ACPICA: Fix table entry truncation calculation ACPI: Enable bit 11 in _PDC to advertise hw coord ACPI: struct device - replace bus_id with dev_name(), dev_set_name() ACPI: add missing KERN_* constants to printks ACPI: dock: Don't eval _STA on every show_docked sysfs read ACPI: disable ACPI cleanly when bad RSDP found ACPI: delete CPU_IDLE=n code ACPI: cpufreq: Remove deprecated /proc/acpi/processor/../performance proc entries ACPI: make some IO ports off-limits to AML ACPICA: add debug dump of BIOS _OSI strings ACPI: proc_dir_entry 'video/VGA' already registered ACPI: Skip the first two elements in the _BCL package ACPI: remove BM_RLD access from idle entry path ACPI: remove locking from PM1x_STS register reads eeepc-laptop: use netlink interface eeepc-laptop: Implement rfkill hotplugging in eeepc-laptop eeepc-laptop: Check return values from rfkill_register eeepc-laptop: Add support for extended hotkeys ...
2009-02-07Merge branches 'release', 'asus', 'bugzilla-12450', 'cpuidle', 'debug', ↵Len Brown1744-15883/+32279
'ec', 'misc', 'printk' and 'processor' into release
2009-02-07ACPI: Kconfig text - Fix the ACPI_CONTAINER module name according to the ↵Thierry Vignaud1-1/+1
real module name. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-07eeepc-laptop: fix oops when changing backlight brightness during ↵Darren Salt1-1/+2
eeepc-laptop init I got the following oops while changing the backlight brightness during startup. When it happens, it prevents use of the hotkeys, Fn-Fx, and the lid button. It's a clear use-before-init, as I verified by testing with an appropriately-placed "else printk". BUG: unable to handle kernel NULL pointer dereference at 00000000 *pde = 00000000 Oops: 0002 [#1] PREEMPT SMP Pid: 160, comm: kacpi_notify Not tainted ( #4) 901 EIP: 0060:[<c0264e68>] [<c0264e68>] eeepc_hotk_notify+26/da EFLAGS: 00010246 CPU: 1 Using defaults from ksymoops -t elf32-i386 -a i386 EAX: 00000009 EBX: 00000000 ECX: 00000009 EDX: f70dbf64 ESI: 00000029 EDI: f7335188 EBP: c02112c9 ESP: f70dbf80 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 f70731e0 f73acd50 c02164ac f7335180 f70aa040 c02112e6 f733518c c012b62f f70aa044 f70aa040 c012bdba f70aa04c 00000000 c012be6e 00000000 f70bdf80 c012e198 f70dbfc4 f70dbfc4 f70aa040 c012bdba 00000000 c012e0c9 c012e091 Call Trace: [<c02164ac>] ? acpi_ev_notify_dispatch+4c/55 [<c02112e6>] ? acpi_os_execute_deferred+1d/25 [<c012b62f>] ? run_workqueue+71/f1 [<c012bdba>] ? worker_thread+0/bf [<c012be6e>] ? worker_thread+b4/bf [<c012e198>] ? autoremove_wake_function+0/2b [<c012bdba>] ? worker_thread+0/bf [<c012e0c9>] ? kthread+38/5f [<c012e091>] ? kthread+0/5f [<c0103abf>] ? kernel_thread_helper+7/10 Code: 00 00 00 00 c3 83 3d 60 5c 50 c0 00 56 89 d6 53 0f 84 c4 00 00 00 8d 42 e0 83 f8 0f 77 0f 8b 1d 68 5c 50 c0 89 d8 e8 a9 fa ff ff <89> 03 8b 1d 60 5c 50 c0 89 f2 83 e2 7f 0f b7 4c 53 10 8d 41 01 Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-07ACPICA: Fix table entry truncation calculationMyron Stowe1-4/+3
During early boot, ACPI RSDT/XSDT table entries are gathered into the 'initial_tables[]' array. This array is currently statically defined (see ./drivers/acpi/tables.c). When there are more table entries than can be held in the 'initial_tables[]' array, the message "Truncating N table entries!" is output. As currently implemented, this message will always erroneously calculate N as 0. This patch fixes the calculation that determines how many table entries will be missing (truncated). This modification may be used under either the GPL or the BSD-style license used for Intel ACPI CA code. Signed-off-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-07ACPI: Enable bit 11 in _PDC to advertise hw coordPallipadi, Venkatesh1-0/+2
Bit 11 in intel PDC definitions is meant for OS capability to handle hardware coordination of P-states. In Linux we have always supported hwardware coordination of P-states. Just let the BIOSes know that we support it, by setting this bit. Some BIOSes use this bit to choose between hardware or software coordination and without this change below, BIOSes switch to software coordination, which is not very optimal in terms of power consumption and extra wakeups from idle. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-07ACPI: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers1-4/+4
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-07ACPI: add missing KERN_* constants to printksFrank Seidel6-11/+12
According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing peaces here for the acpi subsystem. Signed-off-by: Frank Seidel <frank@f-seidel.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-06ACPI: dock: Don't eval _STA on every show_docked sysfs readHolger Macht1-1/+5
Some devices trigger a DEVICE_CHECK on every evalutation of _STA. This can also be seen in commit 8b59560a3baf2e7c24e0fb92ea5d09eca92805db (ACPI: dock: avoid check _STA method). If an undock is processed, the dock driver sends a uevent and userspace might read the show_docked property in sysfs. This causes an evaluation of _STA of the particular device which causes the dock driver to immediately dock again. In any case, evaluation of _STA (show_docked) does not necessarily mean that we are docked, so check with the internal device structure. http://bugzilla.kernel.org/show_bug.cgi?id=12360 Signed-off-by: Holger Macht <hmacht@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-06Merge branch 'for-linus' of ↵Linus Torvalds3-8/+24
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: CRED: Fix SUID exec regression
2009-02-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds27-451/+1421
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (37 commits) Btrfs: Make sure dir is non-null before doing S_ISGID checks Btrfs: Fix memory leak in cache_drop_leaf_ref Btrfs: don't return congestion in write_cache_pages as often Btrfs: Only prep for btree deletion balances when nodes are mostly empty Btrfs: fix btrfs_unlock_up_safe to walk the entire path Btrfs: change btrfs_del_leaf to drop locks earlier Btrfs: Change btrfs_truncate_inode_items to stop when it hits the inode Btrfs: Don't try to compress pages past i_size Btrfs: join the transaction in __btrfs_setxattr Btrfs: Handle SGID bit when creating inodes Btrfs: Make btrfs_drop_snapshot work in larger and more efficient chunks Btrfs: Change btree locking to use explicit blocking points Btrfs: hash_lock is no longer needed Btrfs: disable leak debugging checks in extent_io.c Btrfs: sort references by byte number during btrfs_inc_ref Btrfs: async threads should try harder to find work Btrfs: selinux support Btrfs: make btrfs acls selectable Btrfs: Catch missed bios in the async bio submission thread Btrfs: fix readdir on 32 bit machines ...
2009-02-06eCryptfs: Regression in unencrypted filename symlinksTyler Hicks1-2/+2
The addition of filename encryption caused a regression in unencrypted filename symlink support. ecryptfs_copy_filename() is used when dealing with unencrypted filenames and it reported that the new, copied filename was a character longer than it should have been. This caused the return value of readlink() to count the NULL byte of the symlink target. Most applications don't care about the extra NULL byte, but a version control system (bzr) helped in discovering the bug. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-06Merge branch 'x86/fixes' of ↵Linus Torvalds1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'x86/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: x86-64: fix int $0x80 -ENOSYS return
2009-02-06x86-64: fix int $0x80 -ENOSYS returnRoland McGrath1-3/+5
One of my past fixes to this code introduced a different new bug. When using 32-bit "int $0x80" entry for a bogus syscall number, the return value is not correctly set to -ENOSYS. This only happens when neither syscall-audit nor syscall tracing is enabled (i.e., never seen if auditd ever started). Test program: /* gcc -o int80-badsys -m32 -g int80-badsys.c Run on x86-64 kernel. Note to reproduce the bug you need auditd never to have started. */ #include <errno.h> #include <stdio.h> int main (void) { long res; asm ("int $0x80" : "=a" (res) : "0" (99999)); printf ("bad syscall returns %ld\n", res); return res != -ENOSYS; } The fix makes the int $0x80 path match the sysenter and syscall paths. Reported-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Roland McGrath <roland@redhat.com>
2009-02-06Merge branch 'to-linus' of ↵Linus Torvalds1-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland * 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland: elf core dump: fix get_user use
2009-02-06elf core dump: fix get_user useRoland McGrath1-2/+12
The elf_core_dump() code does its work with set_fs(KERNEL_DS) in force, so vma_dump_size() needs to switch back with set_fs(USER_DS) to safely use get_user() for a normal user-space address. Checking for VM_READ optimizes out the case where get_user() would fail anyway. The vm_file check here was already superfluous given the control flow earlier in the function, so that is a cleanup/optimization unrelated to other changes but an obvious and trivial one. Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Roland McGrath <roland@redhat.com>
2009-02-07CRED: Fix SUID exec regressionDavid Howells3-8/+24
The patch: commit a6f76f23d297f70e2a6b3ec607f7aeeea9e37e8d CRED: Make execve() take advantage of copy-on-write credentials moved the place in which the 'safeness' of a SUID/SGID exec was performed to before de_thread() was called. This means that LSM_UNSAFE_SHARE is now calculated incorrectly. This flag is set if any of the usage counts for fs_struct, files_struct and sighand_struct are greater than 1 at the time the determination is made. All of which are true for threads created by the pthread library. However, since we wish to make the security calculation before irrevocably damaging the process so that we can return it an error code in the case where we decide we want to reject the exec request on this basis, we have to make the determination before calling de_thread(). So, instead, we count up the number of threads (CLONE_THREAD) that are sharing our fs_struct (CLONE_FS), files_struct (CLONE_FILES) and sighand_structs (CLONE_SIGHAND/CLONE_THREAD) with us. These will be killed by de_thread() and so can be discounted by check_unsafe_exec(). We do have to be careful because CLONE_THREAD does not imply FS or FILES. We _assume_ that there will be no extra references to these structs held by the threads we're going to kill. This can be tested with the attached pair of programs. Build the two programs using the Makefile supplied, and run ./test1 as a non-root user. If successful, you should see something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=0 suid=0 SUCCESS - Correct effective user ID and if unsuccessful, something like: [dhowells@andromeda tmp]$ ./test1 --TEST1-- uid=4043, euid=4043 suid=4043 exec ./test2 --TEST2-- uid=4043, euid=4043 suid=4043 ERROR - Incorrect effective user ID! The non-root user ID you see will depend on the user you run as. [test1.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <pthread.h> static void *thread_func(void *arg) { while (1) {} } int main(int argc, char **argv) { pthread_t tid; uid_t uid, euid, suid; printf("--TEST1--\n"); getresuid(&uid, &euid, &suid); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (pthread_create(&tid, NULL, thread_func, NULL) < 0) { perror("pthread_create"); exit(1); } printf("exec ./test2\n"); execlp("./test2", "test2", NULL); perror("./test2"); _exit(1); } [test2.c] #include <stdio.h> #include <stdlib.h> #include <unistd.h> int main(int argc, char **argv) { uid_t uid, euid, suid; getresuid(&uid, &euid, &suid); printf("--TEST2--\n"); printf("uid=%d, euid=%d suid=%d\n", uid, euid, suid); if (euid != 0) { fprintf(stderr, "ERROR - Incorrect effective user ID!\n"); exit(1); } printf("SUCCESS - Correct effective user ID\n"); exit(0); } [Makefile] CFLAGS = -D_GNU_SOURCE -Wall -Werror -Wunused all: test1 test2 test1: test1.c gcc $(CFLAGS) -o test1 test1.c -lpthread test2: test2.c gcc $(CFLAGS) -o test2 test2.c sudo chown root.root test2 sudo chmod +s test2 Reported-by: David Smith <dsmith@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: David Smith <dsmith@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-02-06vfs: Don't call attach_nobh_buffers() with an empty listDave Kleikamp1-1/+1
This is a modification of a patch by Bill Pemberton <wfp5p@virginia.edu> nobh_write_end() could call attach_nobh_buffers() with head == NULL. This would result in a trap when attach_nobh_buffers() attempted to access bh->b_this_page. This can be illustrated by running the writev01 testcase from LTP on jfs. This error was introduced by commit 5b41e74a "vfs: fix data leak in nobh_write_end()". That patch did not take into account that if PageMappedToDisk() is true upon entry to nobh_write_begin(), then no buffers will be allocated for the page. In that case, we won't have to worry about a failed write leaving unitialized data in the page. Of course, head != NULL implies !page_has_buffers(page), so no need to test both. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Dmitri Monakhov <dmonakhov@openvz.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-06Merge branch 'for-linus' of ↵Linus Torvalds4-4/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Add missing COEF initialization for ALC887 ALSA: hda - Add missing initialization for ALC272 sound: usb-audio: handle wMaxPacketSize for FIXED_ENDPOINT devices ALSA: hda - Fix misc workqueue issues ALSA: hda - Add quirk for FSC Amilo Xi2550
2009-02-06ACPI: disable ACPI cleanly when bad RSDP foundLen Brown1-1/+6
When ACPI is disabled in the BIOS of this VIA C3 box, it invalidates the RSDP, which Linux notices: ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080926] Bug Linux neglected to disable ACPI at that stage, and later scribbled on smp_found_config: ACPI: No APIC-table, disabling MPS But this box doesn't run well in legacy PIC mode, it needed IOAPIC mode to perform correctly: http://lkml.org/lkml/2009/2/5/39 So exit ACPI mode cleanly when we first detect that it is hopeless. Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-06ACPI: delete CPU_IDLE=n codeLen Brown2-608/+1
CPU_IDLE=y has been default for ACPI=y since Nov-2007, and has shipped in many distributions since then. Here we delete the CPU_IDLE=n ACPI idle code, since nobody should be using it, and we don't want to maintain two versions. Signed-off-by: Len Brown <len.brown@intel.com>
2009-02-06Merge branch 'for-linus' of ↵Linus Torvalds2-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: dv1394: move deprecation message from module init to file open firewire: core: Remove card from list of cards when enable fails
2009-02-06Add Sascha Hauer to .mailmapUwe Kleine-König1-0/+1
This fixes the shortlog attribution e.g. for 106757b38fff Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-06add another mailmap entry for Uwe Kleine-KönigUwe Kleine-König1-1/+2
I created commit 7971db5a4b4176ad5df590fce07a962c643a2740 on a machine where I forgot to set user.name and user.email before. The default values were not optimal. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-06fork.c: fix NULL pointer dereference when nr_threads == threads-maxLi Zefan1-0/+1
I happened to forked lots of processes, and hit NULL pointer dereference. It is because in copy_process() after checking max_threads, 0 is returned but not -EAGAIN. The bug is introduced by "CRED: Detach the credentials from task_struct" (commit f1752eec6145c97163dbce62d17cf5d928e28a27). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-06Btrfs: Make sure dir is non-null before doing S_ISGID checksChris Mason1-1/+1
The S_ISGID check in btrfs_new_inode caused an oops during subvol creation because sometimes the dir is null. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-02-06Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds3-14/+19
* 'for-linus' of git://neil.brown.name/md: md: Ensure an md array never has too many devices. md: Fix a bug in linear.c causing which_dev() to return the wrong device. md: Allow read error in a single drive raid1 to be passed up.
2009-02-06ieee1394: dv1394: move deprecation message from module init to file openStefan Richter1-4/+4
On many Linux installations, the dv1394 driver will be auto-loaded whenever an AV/C device (e.g. camcorder or audio device) is plugged in. An irritating message would then appear in the kernel log. Defer this message to until a dv1394 character device file is actually used by a program. Also include the program name in the message and update the message slightly. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-06Merge branch 'fix/usb-audio' into for-linusTakashi Iwai1-0/+1
2009-02-06Merge branch 'fix/hda' into for-linusTakashi Iwai3-4/+10
2009-02-06ALSA: hda - Add missing COEF initialization for ALC887Takashi Iwai1-0/+1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06ALSA: hda - Add missing initialization for ALC272Takashi Iwai1-0/+1
ALC272 needs EAPD for speaker outputs as well as other similar ALC codecs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06sound: usb-audio: handle wMaxPacketSize for FIXED_ENDPOINT devicesClemens Ladisch1-0/+1
For audio devices that do not have proper audio descriptors (e.g., Edirol UA-20), we use hardcoded parameters from our quirks list. However, we must still read the maximum packet size from the standard endpoint descriptor; otherwise, we might use packets that are too big and therefore rejected by the USB core. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06md: Ensure an md array never has too many devices.NeilBrown1-10/+14
Each different metadata format supported by md supports a different maximum number of devices. We really should be enforcing this maximum in the kernel, but we aren't quite doing that properly. We currently only enforce it at the 'hot_add' point, which is an older interface which is not used by current userspace. We need to also enforce it at 'add_new_disk' time for active arrays and at 'do_md_run' time when starting a new array. So move the test from 'hot_add' into 'bind_rdev_to_array' which is called from both 'hot_add' and 'add_new_disk, and add a new test in 'analyse_sbs' which is called from 'do_md_run'. This bug (or missing feature) has been around "forever" and so the patch is suitable for any -stable that is currently maintained. Cc: stable@kernel.org Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-06md: Fix a bug in linear.c causing which_dev() to return the wrong device.Andre Noll1-3/+3
ab5bd5cbc8d4b868378d062eed3d4240930fbb86 introduced the following bug in linear software raid for large arrays on 32 bit machines: which_dev() computes the device holding a given sector by shifting down the sector number to a 32 bit range, dividing by the array spacing and looking up the resulting index in the hash table of the array. Because the computed index might be slightly too small, a loop at the end of which_dev() increases the index until the given sector actually falls into the range of the device associated with that index. The changes of the above mentioned commit caused this loop to check whether the _index_ rather than the sector number is small enough, effectively bypassing the loop and thus possibly returning the wrong device. As reported by Simon Kirby, this leads to errors such as linear_make_request: Sector 2340486136 out of bounds on dev sdi: 156301312 sectors, offset 2109870464 Fix this bug by introducing a local variable for the index so that the variable containing the passed sector is left unchanged. Cc: stable@kernel.org Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-06md: Allow read error in a single drive raid1 to be passed up.NeilBrown1-1/+2
If a raid1 only has a single working device and gets a read error, we choose to simply return that error up to the filesystem (or whatever) rather than failing the whole array. However the codes doesn't quite do that. We attempt a readbalance which allocates the same drive, so we retry the read - indefinitely. Instead: If read_balance in the error case chooses the same drive that just failed, treat it as a failure and don't retry. Signed-off-by: NeilBrown <neilb@suse.de>
2009-02-05prevent kprobes from catching spurious page faultsMasami Hiramatsu1-2/+6
Prevent kprobes from catching spurious faults which will cause infinite recursive page-fault and memory corruption by stack overflow. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: <stable@kernel.org> [2.6.28.x] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05braino in sg_ioctl_trans()Al Viro1-1/+1
... and yes, gcc is insane enough to eat that without complaint. We probably want sparse to scream on those... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Privacy Policy