aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/pci/cx25821
AgeCommit message (Collapse)AuthorFilesLines
2013-04-16[media] cx25821: remove cx25821-audio-upstream.c from the Makefilecx25821Hans Verkuil2-4/+1
The audio output is currently not used as this should be rewritten as an alsa driver. For the time being remove this source from the Makefile. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: replace custom ioctls with write()Hans Verkuil4-228/+72
Ideally this should be implemented with vb2, but it'll do for now. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: drop cx25821-video-upstream-ch2.c/hHans Verkuil7-1195/+243
cx25821-video-upstream_ch2.c/h is practically identical to cx25821-video-upstream.c/h so add support for ch2 into cx25821-video-upstream.c instead. After this we can replace the custom ioctls with a proper write() interface. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: add output format ioctlsHans Verkuil1-0/+46
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: prepare querycap for output supportHans Verkuil1-2/+2
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: group all fmt functions togetherHans Verkuil1-41/+43
No other changes, just function reordering. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: setup output nodes correctlyHans Verkuil4-200/+67
Drop the custom ioctls and enable the video output nodes again, this time using standard ioctls. The next step will be to provide a proper write() interface. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove references to subdevices that aren't thereHans Verkuil3-131/+7
This driver does not have subdevices, so why call subdev ops? After removing that it became apparent that only Composite is supported as input, so remove also any reference to other inputs. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove custom ioctls that duplicate v4l2 ioctlsHans Verkuil3-143/+6
No idea why these custom ioctls exist: they have perfectly normal v4l2 counterparts which are already implemented. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: g/s/try/enum_fmt related fixes and cleanupsHans Verkuil1-102/+32
- fill in colorspace - zero priv - delete unsupported formats - fix field handling - s_std should update width/height - proper mapping of width/height to valid resolutions Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: switch to v4l2_fh, add event and prio handlingHans Verkuil3-148/+59
It is now possible to remove cx25821_fh and replace it with v4l2_fh, which in turn makes event handling and core prio handling possible. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: replace resource management functions with fh ownershipHans Verkuil2-100/+35
Just remember which filehandle is streaming instead of using complicated resource masks. After this patch we can replace cx25821_fh with v4l2_fh. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: move vidq from cx25821_fh to cx25821_channelHans Verkuil2-128/+115
This is not a per-filehandle object, it's a per-channel object. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove 'type' field from cx25821_fhHans Verkuil2-42/+15
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: use core lockingHans Verkuil4-96/+27
This allows us to replace .ioctl with .unlocked_ioctl. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove unnecessary debug messagesHans Verkuil1-12/+0
The v4l2 core already has support for debugging ioctls/file operations. No need to do that again. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove TRUE/FALSE/STATUS_(UN)SUCCESSFUL definesHans Verkuil3-7/+2
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: convert to the control frameworkHans Verkuil3-184/+41
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: embed video_device, clean up some kernel log spamHans Verkuil3-55/+16
Embed the video_device struct instead of allocating it. Remove some of the annoying and ugly kernel messages shown during loading and unloading of the module. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove bogus dependenciesHans Verkuil7-44/+4
This driver doesn't use DVB, RC, cx25840 or tveeprom. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove cropping ioctlsHans Verkuil1-44/+0
This driver does not implement cropping, so remove the cropping ioctls. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: make lots of externals staticHans Verkuil3-243/+153
A lot of functions and variables were external when they really can be declared as static. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: s_input didn't check for invalid inputHans Verkuil1-3/+1
The s_input implementation allowed input 1 even if that didn't exist. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove unnecessary global devlistHans Verkuil4-106/+41
This device list is not necessary. The kernel already has all that information, so just use that instead. Also remove a bogus refcount and some dead 'private_free' code in the alsa driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: make cx25821_sram_channels constHans Verkuil8-92/+57
And get rid of the channel0-11 external pointers and two more unused fields in cx25821.h. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: fix log_status, querycapHans Verkuil1-12/+11
log_status shouldn't print LOG STATUS lines, the core does that already. Fix querycap version number and add device_caps support. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove unused fields, ioctlsHans Verkuil4-152/+10
Do some spring cleaning: - there are no board defines with tuners, so remove bogus tuner support. - tv standard handling has nothing to do with tuners, so keep that. - replace the deprecated current_norm by g_std. - querystd isn't implemented, so remove the ioctl. - remove a bunch of unused fields in cx25821.h Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: remove bogus radio/vbi/'video-ioctl' supportHans Verkuil4-143/+88
This device does not support radio or vbi, so remove anything referring to that. In addition, the driver created an 'video ioctl' node, which was unused and was effectively identical to the first video node. This bogus video node is now removed, leaving us with 8 video capture nodes and 2 video output nodes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-16[media] cx25821: fix compiler warningHans Verkuil2-6/+5
drivers/media/pci/cx25821/cx25821-video.c: In function ‘cx25821_video_register’: drivers/media/pci/cx25821/cx25821-video.c:518:1: warning: the frame size of 1600 bytes is larger than 1024 bytes [-Wframe-larger-than=] Fixed by just making the struct video_device template static const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-15[media] cx25821: the audio channel was registered as a video nodeHans Verkuil2-6/+7
Skip the audio channel when registering the video nodes. This fixes a bug where that incorrectly registered 'video' node was never unregistered. Note: this bug only surfaces if the video output nodes are enabled again after the previous patch disabled them. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-15[media] cx25821: do not expose broken video output streamsHans Verkuil1-1/+1
The cx25821 driver has support for one audio output channel and two video output channels. This is implemented in a very ugly and very evil way through a custom ioctl that passes the filename of a file containing the video data, which is then read by the driver itself using vfs. There are a number of problems with this: 1) it's very ugly and very evil (I can't say that often enough). 2) V4L2 supports video output, so why not use that? 3) it's very buggy, closing the filehandle through which you passed the ioctl will oops the kernel. 4) it's a nasty security leak since this allows you to load any file in the system as a video or audio source, so in theory you can output /etc/passwd to audio or video out and record & decode it on another device. Because of all these issues we no longer register those output video nodes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_register ioctlHans Verkuil2-2/+2
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: pass std by value to the write-only s_std ioctlHans Verkuil2-4/+4
This ioctl is defined as IOW, so pass the argument by value instead of by reference. I could have chosen to add const instead, but this is 1) easier to handle in drivers and 2) consistent with the s_std subdev operation. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jonathan Corbet <corbet@lwn.net> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_tuner ioctlHans Verkuil2-2/+2
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-24[media] v4l2: add const to argument of write-only s_frequency ioctlHans Verkuil2-4/+4
This ioctl is defined as IOW, so pass the argument as const. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-18[media] cx25821: Cleanup filename assignment codePeter Senna Tschudin1-15/+6
I'm pasting the original code and my proposal on the commit message for make it easy to compare the two versions. Line 62 of cx25821-audio-upstream.h contains: char *_defaultAudioName = "/root/audioGOOD.wav"; Original code after replace kmemdup for kstrdup, and after fix return error code: if (dev->input_audiofilename) { dev->_audiofilename = kstrdup(dev->input_audiofilename, GFP_KERNEL); if (!dev->_audiofilename) { err = -ENOMEM; goto error; } /* Default if filename is empty string */ if (strcmp(dev->input_audiofilename, "") == 0) dev->_audiofilename = "/root/audioGOOD.wav"; } else { dev->_audiofilename = kstrdup(_defaultAudioName, GFP_KERNEL); if (!dev->_audiofilename) { err = -ENOMEM; goto error; } } Code proposed in this patch: if ((dev->input_audiofilename) && (strcmp(dev->input_audiofilename, "") != 0)) dev->_audiofilename = kstrdup(dev->input_audiofilename, GFP_KERNEL); else dev->_audiofilename = kstrdup(_defaultAudioName, GFP_KERNEL); if (!dev->_audiofilename) { err = -ENOMEM; goto error; } Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-24Merge branch 'v4l_for_linus' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Some cleanups at V4L2 documentation - new drivers: ts2020 frontend, ov9650 sensor, s5c73m3 sensor, sh-mobile veu mem2mem driver, radio-ma901, davinci_vpfe staging driver - Lots of missing MAINTAINERS entries added - several em28xx driver improvements, including its conversion to videobuf2 - several fixups on drivers to make them to better comply with the API - DVB core: add support for DVBv5 stats, allowing the implementation of statistics for new standards like ISDB - mb86a20s: add statistics to the driver - lots of new board additions, cleanups, and driver improvements. * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (596 commits) [media] media: Add 0x3009 USB PID to ttusb2 driver (fixed diff) [media] rtl28xxu: Add USB IDs for Compro VideoMate U620F [media] em28xx: add usb id for terratec h5 rev. 3 [media] media: rc: gpio-ir-recv: add support for device tree parsing [media] mceusb: move check earlier to make smatch happy [media] radio-si470x doc: add info about v4l2-ctl and sox+alsa [media] staging: media: Remove unnecessary OOM messages [media] sh_vou: Use vou_dev instead of vou_file wherever possible [media] sh_vou: Use video_drvdata() [media] drivers/media/platform/soc_camera/pxa_camera.c: use devm_ functions [media] mt9t112: mt9t111 format set up differs from mt9t112 [media] sh-mobile-ceu-camera: fix SHARPNESS control default Revert "[media] fc0011: Return early, if the frequency is already tuned" [media] cx18/ivtv: fix regression: remove __init from a non-init function [media] em28xx: fix analog streaming with USB bulk transfers [media] stv0900: remove unnecessary null pointer check [media] fc0011: Return early, if the frequency is already tuned [media] fc0011: Add some sanity checks and cleanups [media] fc0011: Fix xin value clamping Revert "[media] [PATH,1/2] mxl5007 move reset to attach" ...
2013-02-08[media] btcx-risc: move from media/i2c to media/commonHans Verkuil1-0/+1
The btcx-risc module is a helper module for bttv/conexant based TV cards. It isn't an i2c module at all, instead it should be in common since it is used by 4 pci drivers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-24Merge branch 'v4l_for_linus' into staging/for_v3.9Mauro Carvalho Chehab1-4/+4
* v4l_for_linus: (464 commits) [media] uvcvideo: Set error_idx properly for S_EXT_CTRLS failures [media] uvcvideo: Cleanup leftovers of partial revert [media] uvcvideo: Return -EACCES when trying to set a read-only control Linux 3.8-rc3 mm: reinstante dropped pmd_trans_splitting() check cred: Remove tgcred pointer from struct cred drm/ttm: fix fence locking in ttm_buffer_object_transfer ARM: clps711x: Fix bad merge of clockevents setup ARM: highbank: save and restore L2 cache and GIC on suspend ARM: highbank: add a power request clear ARM: highbank: fix secondary boot and hotplug ARM: highbank: fix typos with hignbank in power request functions ARM: dts: fix highbank cpu mpidr values ARM: dts: add device_type prop to cpu nodes on Calxeda platforms drm/prime: drop reference on imported dma-buf come from gem xen/netfront: improve truesize tracking ARM: mx5: Fix MX53 flexcan2 clock ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array sctp: fix Kconfig bug in default cookie hmac selection EDAC: Cleanup device deregistering path ... Conflicts: drivers/media/pci/dm1105/dm1105.c drivers/media/platform/soc_camera/mx2_camera.c
2013-01-11drivers/media/video/cx25821: remove depends on CONFIG_EXPERIMENTALKees Cook1-1/+1
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Mauro Carvalho Chehab <mchehab@infradead.org> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-03Drivers: media: remove __dev* attributes.Greg Kroah-Hartman1-4/+4
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-21[media] v4l: Convert drivers to use monotonic timestampsSakari Ailus1-1/+1
Convert drivers using wall clock time (CLOCK_REALTIME) to timestamp from the monotonic timer (CLOCK_MONOTONIC). Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] cx25821: Replace kmemdup for kstrdup and clean upPeter Senna Tschudin1-7/+4
Replace kmemdup for kstrdup and cleanup related code. Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] cx25821: fix error return code and clean upPeter Senna Tschudin1-7/+10
The function cx25821_sram_channel_setup_upstream_audio always return zero, so the return value is not saved any more. Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c: fix error ↵Peter Senna Tschudin1-18/+12
return code Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> While here, replace strlen()+kmemdup() to kstrdup(). Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: walter harms <wharms@bfs.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22[media] drivers/media/pci/cx25821/cx25821-video-upstream.c: fix error return ↵Peter Senna Tschudin1-6/+9
code Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-27[media] cx25821: get rid of warning: no previous prototypeMauro Carvalho Chehab6-40/+50
drivers/media/pci/cx25821/cx25821-audio-upstream.c:136:5: warning: no previous prototype for 'cx25821_risc_buffer_upstream_audio' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-audio-upstream.c:200:6: warning: no previous prototype for 'cx25821_free_memory_audio' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-audio-upstream.c:259:5: warning: no previous prototype for 'cx25821_get_audio_data' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-audio-upstream.c:354:5: warning: no previous prototype for 'cx25821_openfile_audio' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-audio-upstream.c:47:5: warning: no previous prototype for 'cx25821_sram_channel_setup_upstream_audio' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-audio-upstream.c:493:5: warning: no previous prototype for 'cx25821_audio_upstream_irq' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-audio-upstream.c:637:5: warning: no previous prototype for 'cx25821_start_audio_dma_upstream' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-biffuncs.h:28:11: warning: no previous prototype for 'getBit' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-biffuncs.h:33:12: warning: no previous prototype for 'clearBitAtPos' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-biffuncs.h:38:12: warning: no previous prototype for 'setBitAtPos' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-i2c.c:332:6: warning: no previous prototype for 'cx25821_av_clk' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video.c:294:5: warning: no previous prototype for 'cx25821_restart_video_queue' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video.c:345:6: warning: no previous prototype for 'cx25821_vid_timeout' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream.c:176:5: warning: no previous prototype for 'cx25821_risc_buffer_upstream' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream.c:303:5: warning: no previous prototype for 'cx25821_get_frame' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream.c:408:5: warning: no previous prototype for 'cx25821_openfile' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream.c:489:5: warning: no previous prototype for 'cx25821_upstream_buffer_prepare' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream.c:551:5: warning: no previous prototype for 'cx25821_video_upstream_irq' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream.c:667:6: warning: no previous prototype for 'cx25821_set_pixelengine' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream.c:699:5: warning: no previous prototype for 'cx25821_start_video_dma_upstream' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:126:5: warning: no previous prototype for 'cx25821_risc_buffer_upstream_ch2' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:258:5: warning: no previous prototype for 'cx25821_get_frame_ch2' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:363:5: warning: no previous prototype for 'cx25821_openfile_ch2' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:510:5: warning: no previous prototype for 'cx25821_video_upstream_irq_ch2' [-Wmissing-prototypes] drivers/media/pci/cx25821/cx25821-video-upstream-ch2.c:650:5: warning: no previous prototype for 'cx25821_start_video_dma_upstream_ch2' [-Wmissing-prototypes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-10-07[media] cx25821: testing the wrong variableDan Carpenter2-2/+2
->input_filename could be NULL here. The intent was to test ->_filename. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-26[media] v4l2: make vidioc_s_crop constHans Verkuil2-2/+2
Write-only ioctls should have a const argument in the ioctl op. Do this conversion for vidioc_s_crop. Adding const for write-only ioctls was decided during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-16[media] Fix some Makefile rulesMauro Carvalho Chehab1-1/+1
On a few places, := were using instead of +=, causing drivers to not compile. While here, standardize the usage of += on all cases where multiple lines are needed, and for obj-y/obj-m targets, and := when just one line is needed, on <module>-obj rules. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Identified-by: Antti Polosaari <crope@iki.fi> Tested-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Privacy Policy