path: root/scripts/kconfig/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2008-10-22x86, um: get rid of arch/um/Kconfig.archAl Viro1-0/+4
Teach scripts/kconfig/Makefile and top-level Makefile that arch/*/Makefile is allowed to say Kconfig := <whatever I want instead of arch/blah/Kconfig>. Rewrite arch/um/Kconfig and arch/um/Kconfig.<subarch> so that the latter would be top-level one (and include the pieces of the former). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2008-04-25kconfig: fix broken target update-po-configSam Ravnborg1-2/+2
Massimo Maiurana reported: In the latest kernel "make update-po-config" fails because it tries to open arch/Kconfig/Kconfig, since the ls command doesn't distinguish between files and directories. Cc: Massimo Maiurana <maiurana@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: gettext support for gconfigEGRY Gabor1-2/+5
Gettext support for menu and toolbar. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: update-po-config infoEGRY Gabor1-7/+11
This patch adds tracking messages. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: if ncurses-devel is missing then say soSam Ravnborg1-6/+8
With this patch when ncurses-devel (or whatever it is named) is missing trying to run menuconfig will result in this: $ make menuconfig HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/kxgettext.o *** Unable to find the ncurses libraries or the *** required header files. *** 'make menuconfig' requires the ncurses libraries. *** *** Install ncurses (ncurses-devel) and try again. *** make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1 make: *** [menuconfig] Error 2 Much better than before where we just listed some build errors. The other *config targets will work indepenednt on ncurses being present or not. Includes improvements suggested by: Frans Pop <elendil@planet.nl> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Frans Pop <elendil@planet.nl>
2007-11-12x86: enable "make ARCH=x86"Sam Ravnborg1-6/+1
After unification of the Kconfig files and introducing K64BIT support in kconfig it required only trivial changes to enable "make ARCH=x86". With this patch you can build for x86_64 in several ways: 1) make ARCH=x86_64 2) make ARCH=x86 K64BIT=y 3) make ARCH=x86 menuconfig => select 64-bit Likewise for i386 with the addition that i386 is default is you say ARCH=x86. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-10-25x86: move i386 and x86_64 Kconfig files to x86 directorySam Ravnborg1-1/+6
After a small change in kconfig Makefile we could move all x86 Kconfig files to x86 directory. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25kconfig: small code refactoring in kconfig MakefileSam Ravnborg1-13/+15
Do not hardcode the arch/$(ARCH)/Kconfig name all over Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25x86: move defconfig files for i386 and x86_64 to x86Sam Ravnborg1-3/+3
With some small changes to kconfig makefile we can now locate the defconfig files for i386 and x86_64 in the configs/ subdirectory under x86. make ARCH=i386 defconfig and make defconfig works as expected also after this change. But arch maintainers shall now update a defconfig file in the configs/ directory. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-18kconfig: comment typo in scripts/kconfig/Makefile.Rob Landley1-1/+1
Typo in comment in scripts/kconfig/Makefile. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kbuild: check if we can link gettext not just compileSam Ravnborg1-8/+2
cygwin provides the header file but the lib file needs to be added manually. A generic fix is to check if we can compile and link a program that uses gettext() and if it fails fall back to NO_NLS. International users of cygwin may have to specify HOST_LOADLIBES := "-lintl" on the make command line. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-16kconfig: fix update-po-configSam Ravnborg1-17/+18
Massimo Maiurana <maiurana@gmail.com> reported that update-po-config was broken: 1) spelling errors in Makefile so arch/um failed 2) UTF-8 was not supported The following patch address the above problems. kxgettext now append the output to the .pot file generated by xgettext - so we have a header. In all places UFT-8 is specifed so we now flawlessly support UTF-8. The Kconfig files had an empty string in a few cases - these are now supressed in kxgettext. With this the translators can now pick up where they left and get it all translated. There are ~11000 strings to be translated... Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Massimo Maiurana <maiurana@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
2007-05-02kconfig: refer to qt3 if we cannot find qt librariesSam Ravnborg1-2/+2
We do not support qt4 (yet) so the simple fix was to warn that qt3 are missing. The better fix would have been to implment qt4 support but that has failed so far. This solves http://bugzilla.kernel.org/show_bug.cgi?id=8277 Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02kbuild: remove kconfig binaries during make mrproperSam Ravnborg1-0/+1
Nigel Cunningham <nigel@nigel.suspend2.net> noticed that 'make mrproper' did not remove mconf. Fixed so we now remove all relevant binaries. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
2006-09-30kbuild: do not build mconf & lxdialog unless neededSam Ravnborg1-1/+6
Due to a limitation in kbuild all objects referred by xxx-y or xxx-objs will be build when one of the targets needs to e build. This caused lxdialog to be build pulling in ncurses that is not always available. So avoid building mconf & lxdialog unless really needed. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-09-30kconfig/lxdialog: fix make mrproperSam Ravnborg1-1/+0
No Makefile in scripts/kconfig/lxdialog anymore, so do not go there during make mrproper. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-09-30kconfig/menuconfig: lxdialog is now built-inSam Ravnborg1-2/+21
lxdialog was previously called as an external program causing screen to flicker when used. With this patch lxdialog is now built-in. It is loosly based om previous work by: Petr Baudis <pasky@ucw.cz> Following is a list of changes: o Moved build of dialog routings to kconfig Makefile o menubox + checklist uses a new item list to hold all menu items o in util.c implmented helper function to deal with item list o menubox now uses parameters to save scroll state (avoids temp file) o textbox now get text to be displayed as parameter and not a file o make sure to properly delete subwin's before main windows o killed unused files: lxdialog.c msgbox.c o modified return value for ESC to match direct calling o in a few places the code has been adjusted to 80 char wide o in textbox a small refactoring was made to make code remotely readable o in mconf removed all unused stuff (functions/variables) Following is a list of know short comings: a) pressing ESC twice will be interpreted as two ESC presses b) resize does not work. menuconfig needs to be restarted to be adjusted Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-09-25kbuild: update help in top level MakefileRobert P. J. Day1-0/+1
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-03-06kbuild: change kbuild to not rely on incorrect GNU make behaviorPaul Smith1-2/+2
The kbuild system takes advantage of an incorrect behavior in GNU make. Once this behavior is fixed, all files in the kernel rebuild every time, even if nothing has changed. This patch ensures kbuild works with both the incorrect and correct behaviors of GNU make. For more details on the incorrect behavior, see: http://lists.gnu.org/archive/html/bug-make/2006-03/msg00003.html Changes in this patch: - Keep all targets that are to be marked .PHONY in a variable, PHONY. - Add .PHONY: $(PHONY) to mark them properly. - Remove any $(PHONY) files from the $? list when determining whether targets are up-to-date or not. Signed-off-by: Paul Smith <psmith@gnu.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-02-27kbuild: small update of allnoconfig descriptionJesper Juhl1-1/+1
'allnoconfig' is described by 'make help' as a "minimal config", that's not strictly correct. To be pedantic, a minimal config would be one where EMBEDDED was set to Y and most things therein disabled etc. Simply answering 'no' to all options does not give a minimal config. A better description of allnoconfig is that it answers all options with 'no'. This patch updates the description. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-02-09Revert "[PATCH] kconfig: detect if -lintl is needed when linking conf,mconf"Linus Torvalds1-11/+1
This reverts commit 5e375bc7d586e0df971734a5a5f1f080ffd89b68. Kyle McMartin steps on his soap-box: "Sigh. Can everyone please stop assuming gcc can output to /dev/null? On several platforms, ld tries to lseek in the output file, and fails if it can't." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05[PATCH] kconfig: detect if -lintl is needed when linking conf,mconfRobb, Sam1-1/+11
On a system where libintl.h is present, but the NLS functionality is supplied by a separate library instead of the system C library, an attempt to "make config" or "make menuconfig" will fail with link errors, ex: scripts/kconfig/mconf.o:mconf.c:(.text+0xf63): undefined reference to `_libintl_gettext' This patch attempts to correct the problem by detecting whether or not NLS support requires linking with libintl. Signed-off-by: Samuel J Robb <sam.robb@timesys.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06kconfig: fix gconfig with POSIXLY_CORRECT=1Adrian Bunk1-4/+4
This patch fixed "make gconfig" with POSIXLY_CORRECT=1 set. This issue was reported by Jens Elkner <elkner@linofee.org> in kernel Bugzilla #2919. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2006-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds1-1/+2
2005-12-16kconfig: move lxdialog to scripts/kconfig/lxdialogSam Ravnborg1-1/+2
The only lxdialog user i kconfig - for menuconfig. So move it to reflect this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-11-22[PATCH] prefer pkg-config for the QT checkRoman Zippel1-29/+39
This makes pkg-config now the prefered way to configure QT and properly fixes the recent Fedora breakage and leaves the old QT detection as fallback mechanism. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] kconfig: use gperf for kconfig keywordsRoman Zippel1-3/+8
Use gperf to generate a hash for the kconfig keywords. This greatly reduces the size of the generated scanner and makes it easier to extend kconfig. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] kconfig: update kconfig MakefileRoman Zippel1-11/+7
Remove the long obsolete zconf.tab.h and fix kconfig make rules to generate the correct output files. Setting LKC_GENPARSER will now also update the shipped files. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] typo correction for fix-build-on-nls-free-systemsYuri Vasilevski1-1/+1
A typo fix for fix-build-on-nls-free-systems.patch that caused all systems to be detected as not having NLS. Signed-off-by: Yuri Vasilevski <yvasilev@duke.math.cinvestav.mx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-06kconfig: fix xconfig on fedora 2 & 3 (x86_64)Sam Ravnborg1-5/+10
From: Than Ngo <than@redhat.com> qt as installed on fedora core (2 and 3) does not work with vanilla kernel. The linker fails to locate the qt lib: Actual Results: # make xconfig HOSTLD scripts/kconfig/qconf /usr/bin/ld: cannot find -lqt collect2: ld returned 1 exit status Than Ngo has provided following fix for the bug. Cc: Than Ngo <than@redhat.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-10-30[PATCH] fix build on nls free systemsYuri Vasilevski1-0/+9
I made a patch that detects if libintl.h (needed for nls) is present on the host system and if it's not, it nls support is disabled by providing dummies for the used nls functions. This way if there is nls support on the host system the *config targets will build according to Arnaldo Carvalho de Melo's i18n modifications, else it just uses the original English messages. I have also made a bug report at kernel's bugzilla: http://bugzilla.kernel.org/show_bug.cgi?id=5501 And there is a discussion about this problem in Gentoo's bugzilla: http://bugs.gentoo.org/show_bug.cgi?id=99810 Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] kconfig: linux.pot for all archEgry Gabor1-2/+14
The 'make update-po-config' creates the .pot file for the default arch. This patch enhances it with all arch. Signed-off-by: Egry Gabor <gaboregry@t-online.hu> Cc: Arnaldo Carvalho de Melo <acme@conectiva.com.br> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-05[PATCH] Kconfig i18n supportArnaldo Carvalho de Melo1-3/+11
This patch adds i18n support for make *config, allowing users to have the config process in their own language. No printk was harmed in the process, don't worry, so all the bug reports, kernel messages, etc, remain in english, just the user tools to configure the kernel are internationalized. Users not interested in translations can just unset the related LANG, LC_ALL, etc env variables and have the config process in plain english, something like: LANG= make menuconfig is enough for having the whole config process in english. Or just don't install any translation file. Translations for brazilian portuguese are being done by a team of volunteers at: http://www.visionflex.inf.br/kernel_ptbr/pmwiki.php/Principal/Traducoes To start the translation process: make update-po-config This will generate the pot template named scripts/kconfig/linux.pot, copy it to, say, ~/es.po, to start the translation for spanish. To test your translation, as root issue this command: msgfmt -o /usr/share/locale/es/LC_MESSAGES/linux.mo ~/es.po Replace "es" with your language code. Then execute, for instance: make menuconfig The current patch doesn't use any optimization to reduce the size of the generated .mo file, it is possible to use the config option as a key, but this doesn't prevent the current patch from being used or the translations done under the current scheme to be in any way lost if we chose to do any kind of keying. Thanks to Fabricio Vaccari for starting the pt_BR (brazilian portuguese) translation effort, Thiago Maciera for helping me with the gconf.cc (QT frontent) i18n coding and to all the volunteers that are already working on the first translation, to pt_BR. I left the question on whether to ship the translations with the stock kernel sources to be discussed here, please share your suggestions. Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+208
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

Privacy Policy