path: root/drivers/video/fbmem.c
AgeCommit message (Collapse)AuthorFilesLines
2011-09-02fb: avoid possible deadlock caused by fb_set_suspendHerton Ronaldo Krzesinski1-3/+0
A lock ordering issue can cause deadlocks: in framebuffer/console code, all needed struct fb_info locks are taken before acquire_console_sem(), in places which need to take console semaphore. But fb_set_suspend is always called with console semaphore held, and inside it we call lock_fb_info which gets the fb_info lock, inverse locking order of what the rest of the code does. This causes a real deadlock issue, when we write to state fb sysfs attribute (which calls fb_set_suspend) while a framebuffer is being unregistered by remove_conflicting_framebuffers, as can be shown by following show blocked state trace on a test program which loads i915 and runs another forked processes writing to state attribute: Test process with semaphore held and trying to get fb_info lock: .. fb-test2 D 0000000000000000 0 237 228 0x00000000 ffff8800774f3d68 0000000000000082 00000000000135c0 00000000000135c0 ffff880000000000 ffff8800774f3fd8 ffff8800774f3fd8 ffff880076ee4530 00000000000135c0 ffff8800774f3fd8 ffff8800774f2000 00000000000135c0 Call Trace: [<ffffffff8141287a>] __mutex_lock_slowpath+0x11a/0x1e0 [<ffffffff814142f2>] ? _raw_spin_lock_irq+0x22/0x40 [<ffffffff814123d3>] mutex_lock+0x23/0x50 [<ffffffff8125dfc5>] lock_fb_info+0x25/0x60 [<ffffffff8125e3f0>] fb_set_suspend+0x20/0x80 [<ffffffff81263e2f>] store_fbstate+0x4f/0x70 [<ffffffff812e7f70>] dev_attr_store+0x20/0x30 [<ffffffff811c46b4>] sysfs_write_file+0xd4/0x160 [<ffffffff81155a26>] vfs_write+0xc6/0x190 [<ffffffff81155d51>] sys_write+0x51/0x90 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b .. modprobe process stalled because has the fb_info lock (got inside unregister_framebuffer) but waiting for the semaphore held by the test process which is waiting to get the fb_info lock: .. modprobe D 0000000000000000 0 230 218 0x00000000 ffff880077a4d618 0000000000000082 0000000000000001 0000000000000001 ffff880000000000 ffff880077a4dfd8 ffff880077a4dfd8 ffff8800775a2e20 00000000000135c0 ffff880077a4dfd8 ffff880077a4c000 00000000000135c0 Call Trace: [<ffffffff81411fe5>] schedule_timeout+0x215/0x310 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50 [<ffffffff814130dd>] __down+0x6d/0xb0 [<ffffffff81089f71>] down+0x41/0x50 [<ffffffff810629ac>] acquire_console_sem+0x2c/0x50 [<ffffffff812ca53d>] unbind_con_driver+0xad/0x2d0 [<ffffffff8126f5f7>] fbcon_event_notify+0x457/0x890 [<ffffffff814144ff>] ? _raw_spin_unlock_irqrestore+0x1f/0x50 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50 [<ffffffff8141836d>] notifier_call_chain+0x4d/0x70 [<ffffffff8108a3b8>] __blocking_notifier_call_chain+0x58/0x80 [<ffffffff8108a3f6>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff8125dabb>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff8125e6ac>] unregister_framebuffer+0x7c/0x130 [<ffffffff8125e8b3>] remove_conflicting_framebuffers+0x153/0x180 [<ffffffff8125eef3>] register_framebuffer+0x93/0x2c0 [<ffffffffa0331112>] drm_fb_helper_single_fb_probe+0x252/0x2f0 [drm_kms_helper] [<ffffffffa03314a3>] drm_fb_helper_initial_config+0x2f3/0x6d0 [drm_kms_helper] [<ffffffffa03318dd>] ? drm_fb_helper_single_add_all_connectors+0x5d/0x1c0 [drm_kms_helper] [<ffffffffa037b588>] intel_fbdev_init+0xa8/0x160 [i915] [<ffffffffa0343d74>] i915_driver_load+0x854/0x12b0 [i915] [<ffffffffa02f0e7e>] drm_get_pci_dev+0x19e/0x360 [drm] [<ffffffff8141821d>] ? sub_preempt_count+0x9d/0xd0 [<ffffffffa0386f91>] i915_pci_probe+0x15/0x17 [i915] [<ffffffff8124481f>] local_pci_probe+0x5f/0xd0 [<ffffffff81244f89>] pci_device_probe+0x119/0x120 [<ffffffff812eccaa>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff812ed003>] driver_probe_device+0xa3/0x290 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0 [<ffffffff812ed29b>] __driver_attach+0xab/0xb0 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0 [<ffffffff812ebd3e>] bus_for_each_dev+0x5e/0x90 [<ffffffff812ecc2e>] driver_attach+0x1e/0x20 [<ffffffff812ec6f2>] bus_add_driver+0xe2/0x320 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915] [<ffffffff812ed536>] driver_register+0x76/0x140 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915] [<ffffffff81245216>] __pci_register_driver+0x56/0xd0 [<ffffffffa02f1264>] drm_pci_init+0xe4/0xf0 [drm] [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915] [<ffffffffa02e84a8>] drm_init+0x58/0x70 [drm] [<ffffffffa03aa094>] i915_init+0x94/0x96 [i915] [<ffffffff81002194>] do_one_initcall+0x44/0x190 [<ffffffff810a066b>] sys_init_module+0xcb/0x210 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b .. fb-test2 which reproduces above is available on kernel.org bug #26232. To solve this issue, avoid calling lock_fb_info inside fb_set_suspend, and move it out to where needed (callers of fb_set_suspend must call lock_fb_info before if needed). So far, the only place which needs to call lock_fb_info is store_fbstate, all other places which calls fb_set_suspend are suspend/resume hooks that should not need the lock as they should be run only when processes are already frozen in suspend/resume. References: https://bugzilla.kernel.org/show_bug.cgi?id=26232 Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: stable@kernel.org
2011-05-14Further fbcon sanity checkingBruno Prémont1-4/+4
This moves the if (num_registered_fb == FB_MAX) return -ENXIO; check _AFTER_ the call to do_remove_conflicting_framebuffers() as this would (now in a safe way) allow a native driver to replace the conflicting one even if all slots in registered_fb[] are taken. This also prevents unregistering a framebuffer that is no longer registered (vga16f will unregister at module unload time even if the frame buffer had been unregistered earlier due to being found conflicting). Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-14fbmem: fix remove_conflicting_framebuffers racesLinus Torvalds1-49/+68
When a register_framebuffer() call results in us removing old conflicting framebuffers, the new registration_lock doesn't protect that situation. And we can't just add the same locking to the function, because these functions call each other: register_framebuffer() calls remove_conflicting_framebuffers, which in turn calls unregister_framebuffer for any conflicting entry. In order to fix it, this just creates wrapper functions around all three functions and makes the versions that actually do the work be called "do_xxx()", leaving just the wrapper that gets the lock and calls the worker function. So the rule becomes simply that "do_xxxx()" has to be called with the lock held, and now do_register_framebuffer() can just call do_remove_conflicting_framebuffers(), and that in turn can call _do_unregister_framebuffer(), and there is no deadlock, and we can hold the registration lock over the whole sequence, fixing the races. It also makes error cases simpler, and fixes one situation where we would return from unregister_framebuffer() without releasing the lock, pointed out by Bruno Prémont. Tested-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12fbmem: make read/write/ioctl use the frame buffer at open timeLinus Torvalds1-16/+34
read/write/ioctl on a fbcon file descriptor has traditionally used the fbcon not when it was opened, but as it was at the time of the call. That makes no sense, but the lack of sense is much more obvious now that we properly ref-count the usage - it means that the ref-counting doesn't actually protect operations we do on the frame buffer. This changes it to look at the fb_info that we got at open time, but in order to avoid using a frame buffer long after it has been unregistered, we do verify that it is still current, and return -ENODEV if not. Acked-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-12fbcon: add lifetime refcount to opened frame buffersLinus Torvalds1-10/+46
This just adds the refcount and the new registration lock logic. It does not (for example) actually change the read/write/ioctl routines to actually use the frame buffer that was opened: those function still end up alway susing whatever the current frame buffer is at the time of the call. Without this, if something holds the frame buffer open over a framebuffer switch, the close() operation after the switch will access a fb_info that has been free'd by the unregistering of the old frame buffer. (The read/write/ioctl operations will normally not cause problems, because they will - illogically - pick up the new fbcon instead. But a switch that happens just as one of those is going on might see problems too, the window is just much smaller: one individual op rather than the whole open-close sequence.) This use-after-free is apparently fairly easily triggered by the Ubuntu 11.04 boot sequence. Acked-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Anca Emanuel <anca.emanuel@gmail.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Andy Whitcroft <andy.whitcroft@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-04-06fb: Reduce priority of resource conflict messageMatthew Garrett1-1/+1
It's expected that efifb will conflict with a native driver, so the handover message should be informational rather than an error. Signed-off-by: Matthew Garrett <mjg@redhat.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-26console: rename acquire/release_console_sem() to console_lock/unlock()Torben Hohn1-6/+6
The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Thomas Gleixner <tglx@tglx.de> Cc: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-12-24fb: fix overlapping test off-by-one.Dave Airlie1-1/+1
On my system with a radeon x2, the first GPU was not overlapping vesa but the test decided it was. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-28fbmem: fix fb_read, fb_write unaligned accessesJames Hogan1-32/+14
fb_{read,write} access the framebuffer using lots of fb_{read,write}l's but don't check that the file position is aligned which can cause problems on some architectures which do not support unaligned accesses. Since the operations are essentially memcpy_{from,to}io, new fb_memcpy_{from,to}fb macros have been defined and these are used instead. For Sparc, fb_{read,write} macros use sbus_{read,write}, so this defines new sbus_memcpy_{from,to}io functions the same as memcpy_{from,to}io but using sbus_{read,write}b instead of {read,write}b. Signed-off-by: James Hogan <james@albanarts.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28fbmem: fix whitespaceJames Hogan1-7/+7
Change a few lines of indentation to tabs. Signed-off-by: James Hogan <james@albanarts.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-11fbmem: VM_IO set, but not propagatedDaniel De Graaf1-0/+1
When we setup up the VMA flags for the mmap flag and we end up using the fallback mmap functionality we set the vma->vm_flags |= VM_IO. However we neglect to propagate the flag to the vma->vm_page_prot. This bug was found when Linux kernel was running under Xen. In that scenario, any page that has VM_IO flag to it, means that it MUST be a MMIO/VRAM backend memory , _not_ System RAM. That is what the fbmem.c does: sets VM_IO, ioremaps the region - everything is peachy. Well, not exactly. The vm_page_prot does not get the relevant PTE flags set (_PAGE_IOMAP) which under Xen is a death-kneel to pages that are referencing real physical devices but don't have that flag set. This patch fixes this. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Tested-by: Eamon Walsh <ewalsh@tycho.nsa.gov> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11drivers/video/fbmem.c: simplify strlen()==0 check in fb_get_options()Denys Vlasenko1-3/+2
Replaced !strlen(str) check with !str[0]. Removed the variable which was used solely to store strlen result. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-22fbmem: avoid printk format warning with 32-bit resourcesRandy Dunlap1-1/+4
Fix printk formats: drivers/video/fbmem.c: In function 'fb_do_apertures_overlap': drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 2 has type 'resource_size_t' drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'resource_size_t' drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'resource_size_t' drivers/video/fbmem.c:1494: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'resource_size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-18vga16fb, drm: vga16fb->drm handoffMarcin Slusarz1-3/+11
let vga16fb claim 0xA0000+0x10000 region as its aperture; drm drivers don't use it, so we have to detect it and kick vga16fb manually - but only if drm is driving the primary card Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18fbmem, drm/nouveau: kick firmware framebuffers as soon as possibleMarcin Slusarz1-18/+25
Currently vesafb/efifb/... is kicked when hardware driver is registering framebuffer. To do it hardware must be fully functional, so there's a short window between start of initialisation and framebuffer registration when two drivers touch the hardware. Unfortunately sometimes it breaks nouveau initialisation. Fix it by kicking firmware driver(s) before we start touching the hardware. Reported-by: Didier Spaier <didier.spaier@epsm.fr> Tested-by: Didier Spaier <didier.spaier@epsm.fr> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Peter Jones <pjones@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-18fbdev: allow passing more than one aperture for handoffMarcin Slusarz1-3/+26
It removes a hack from nouveau code which had to detect which region to pass to kick vesafb/efifb. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Peter Jones <pjones@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-25fb: for framebuffer handover don't exit the loop early.Dave Airlie1-1/+0
An offb machine has been seen in the fields which adds two offb nodes, so continue scanning the list after removing one. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-30Merge branch 'drm-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (25 commits) drm/radeon/kms: Convert R520 to new init path and associated cleanup drm/radeon/kms: Convert RV515 to new init path and associated cleanup drm: fix radeon DRM warnings when !CONFIG_DEBUG_FS drm: fix drm_fb_helper warning when !CONFIG_MAGIC_SYSRQ drm/r600: fix memory leak introduced with 64k malloc avoidance fix. drm/kms: make fb helper work for all drivers. drm/radeon/r600: fix offset handling in CS parser drm/radeon/kms/r600: fix forcing pci mode on agp cards drm/radeon/kms: fix for the extra pages copying. drm/radeon/kms/r600: add support for vline relocs drm/radeon/kms: fix some bugs in vline reloc drm/radeon/kms/r600: clamp vram to aperture size drm/kms: protect against fb helper not being created. drm/r600: get values from the passed in IB not the copy. drm: create gitignore file for radeon drm/radeon/kms: remove unneeded master create/destroy functions. drm/kms: start adding command line interface using fb. fb: change rules for global rules match. drm/radeon/kms: don't require up to 64k allocations. (v2) drm/radeon/kms: enable dac load detection by default. ... Trivial conflicts in drivers/gpu/drm/radeon/radeon_asic.h due to adding '->vga_set_state' function pointers.
2009-09-25fb: change rules for global rules match.Dave Airlie1-1/+1
Having a : should be enough 'fb:' isn't really useful if the fb wants to a kms output ID. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-09-23fb: do not ignore fb_set_par errorsFlorian Tobias Schandinat1-2/+13
At the moment about half of the framebuffer drivers can return an error code in fb_set_par. Until now it would be silently ignored by fbmem.c and fbcon.c. This patch fixes fbmem.c to return the error code and restore var on error. But it is not clear in which video mode the device is when fb_set_par fails. It would be good and reasonable if it were in the old state but there is no guarantee that this is true for all existing drivers. Additionally print a message if a failing fb_set_par is detected in fbmem.c or fbcon.c. Although most errors should be caught by the previous fb_check_var some errors can't as they are dynamic (memory allocations, ...) and can only be detected while performing the operations which is forbidden in fb_check_var. This patch shouldn't have a negative impact on normal operation as all drivers return 0 on success. The impact in case of error depends heavily on the driver and caller but it's expected to be better than before. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23fb: fix fb_pan_display range checkFlorian Tobias Schandinat1-2/+2
Fix the range check for panning. The current code fails to detect some invalid values (very high ones that can occur if an app tries to move further up/left than 0,0) as the check uses the unknown values for calculation so that an overflow can occur. To fix this it is sufficient to move the calculation to the right side to use only trusted values. Kai Jiang detected this problem and proposed an initial patch. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Kai Jiang <b18973@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan1-1/+0
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08Revert "fb: Initialize fb_info mutexes in framebuffer_alloc()"Linus Torvalds1-0/+2
This reverts commit 4148df9b0f38bdd362dd91d52076926c11cbe5a9. Let's hope that the mm_lock initialization is now correct with all drivers, following Krzysztof's patches. Requested-by: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06fb: Initialize fb_info mutexes in framebuffer_alloc()Paul Mundt1-2/+0
This way they'll be properly initialized early enough for users that may touch them before the framebuffer has been registered. Drivers that allocate their fb_info structure some other way (like matrocfb's broken static allocation) need to be fixed up appropriately. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-01fbdev: add mutex for fb_mmap lockingKrzysztof Helt1-8/+5
Add a mutex to avoid a circular locking problem between the mm layer semaphore and fbdev ioctl mutex through the fb_mmap() call. Also, add mutex to all places where smem_start and smem_len fields change so the mutex inside the fb_mmap() is actually used. Changing of these fields before calling the framebuffer_register() are not mutexed. This is 2.6.31 material. It removes one lockdep (fb_mmap() and register_framebuffer()) but there is still another one (fb_release() and register_framebuffer()). It also cleans up handling of the smem_start and smem_len fields used by mutexed section of the fb_mmap(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17fbdev: add support for handoff from firmware to hw framebuffersDave Airlie1-0/+31
With KMS we have ran into an issue where we really want the KMS fb driver to be the one running the console, so panics etc can be shown by switching out of X etc. However with vesafb/efifb built-in, we end up with those on fb0 and the KMS fb driver on fb1, driving the same piece of hw, so this adds an fb info flag to denote a firmware fbdev, and adds a new aperture base/size range which can be compared when the hw drivers are installed to see if there is a conflict with a firmware driver, and if there is the firmware driver is unregistered and the hw driver takes over. It uses new aperture_base/size members instead of comparing on the fix smem_start/length, as smem_start/length might for example only cover the first 1MB of the PCI aperture, and we could allocate the kms fb from 8MB into the aperture, thus they would never overlap. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Dave Airlie <airlied@redhat.com> Acked-by: Peter Jones <pjones@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13fbdev: fix info->lock deadlock in fbcon_event_notify()Andrea Righi1-0/+19
fb_notifier_call_chain() is called with info->lock held, i.e. in do_fb_ioctl() => FBIOPUT_VSCREENINFO => fb_set_var() and the some notifier callbacks, like fbcon_event_notify(), try to re-acquire info->lock again. Remove the lock/unlock_fb_info() in all the framebuffer notifier callbacks' and be sure to always call fb_notifier_call_chain() with info->lock held. Reported-by: Pavel Roskin <proski@gnu.org> Reported-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01fbdev: uninline lock_fb_info()Andrew Morton1-0/+11
Before: text data bss dec hex filename 3648 2910 32 6590 19be drivers/video/backlight/backlight.o 3226 2812 32 6070 17b6 drivers/video/backlight/lcd.o 30990 16688 8480 56158 db5e drivers/video/console/fbcon.o 15488 8400 24 23912 5d68 drivers/video/fbmem.o After: text data bss dec hex filename 3537 2870 32 6439 1927 drivers/video/backlight/backlight.o 3131 2772 32 5935 172f drivers/video/backlight/lcd.o 30876 16648 8480 56004 dac4 drivers/video/console/fbcon.o 15506 8400 24 23930 5d7a drivers/video/fbmem.o Cc: Andrea Righi <righi.andrea@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01fbmem: fix fb_info->lock and mm->mmap_sem circular locking dependencyAndrea Righi1-10/+1
Fix a circular locking dependency in the frame buffer console driver pushing down the mutex fb_info->lock. Circular locking dependecies occur calling the blocking fb_notifier_call_chain() with fb_info->lock held. Notifier callbacks can try to acquire mm->mmap_sem, while fb_mmap() acquires the locks in the reverse order mm->mmap_sem => fb_info->lock. Tested-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-05fbmem: don't call copy_from/to_user() with mutex heldAndrea Righi1-66/+69
Avoid calling copy_from/to_user() with fb_info->lock mutex held in fbmem ioctl(). fb_mmap() is called under mm->mmap_sem (A) held, that also acquires fb_info->lock (B); fb_ioctl() takes fb_info->lock (B) and does copy_from/to_user() that might acquire mm->mmap_sem (A), causing a deadlock. NOTE: it doesn't push down the fb_info->lock in each own driver's fb_ioctl(), so there are still potential deadlocks elsewhere. Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Johannes Weiner <hannes@saeurebad.de> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06fbdev/logo: check compatibility of main and extra logosGeert Uytterhoeven1-0/+4
The code to draw penguin logos always uses some properties of the main logo. This is incorrect if additional logos (CONFIG_FB_LOGO_EXTRA=y) have different types than the main logo, which causes corrupted logo images. http://bugzilla.kernel.org/show_bug.cgi?id=12181 Hence skip additional logos that are not compatible with the main logo. Technically, it's possible to draw multiple logos of different types on truecolor displays, but this would complicate the (already quite complicated) logo drawing code even more. This patch fixes a problem with Debian's linux-image-2.6.26-1-powerpc64 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=508173 Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-20fbdev: clean the penguin's dirty feetClemens Ladisch1-1/+1
When booting in a direct color mode, the penguin has dirty feet, i.e., some pixels have the wrong color. This is caused by fb_set_logo_directpalette() which does not initialize the last 32 palette entries. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-06fbdev: fix fb_compat_ioctl() deadlocksGeert Uytterhoeven1-24/+39
commit 3e680aae4e53ab54cdbb0c29257dae0cbb158e1c ("fb: convert lock/unlock_kernel() into local fb mutex") introduced several deadlocks in the fb_compat_ioctl() path, as mutex_lock() doesn't allow recursion, unlike lock_kernel(). This broke frame buffer applications on 64-bit systems with a 32-bit userland. commit 120a37470c2831fea49fdebaceb5a7039f700ce6 ("framebuffer compat_ioctl deadlock") fixed one of the deadlocks. This patch fixes the remaining deadlocks: - Revert commit 120a37470c2831fea49fdebaceb5a7039f700ce6, - Extract the core logic of fb_ioctl() into a new function do_fb_ioctl(), - Change all callsites of fb_ioctl() where info->lock is already held to call do_fb_ioctl() instead, - Add sparse annotations to all routines that take info->lock. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30framebuffer compat_ioctl deadlockMikulas Patocka1-2/+2
Fix deadlock in fb_compat_ioctl. fb_compat_ioctl acquires a mutex and calls fb_ioctl that tries to acquire that mutex too. A regression added during BKL removal. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20fb: convert lock/unlock_kernel() into local fb mutexKrzysztof Helt1-19/+20
Change lock_kernel()/unlock_kernel() to local fb mutex. Each frame buffer instance has its own mutex. The one line try_to_load() function is unrolled to request_module() in two places for readability. [righi.andrea@gmail.com: fb: fix NULL pointer BUG dereference in fb_open()] Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20fb: push down the BKL in the ioctl handlerAlan Cox1-55/+86
Framebuffer is heavily BKL dependant at the moment so just wrap the ioctl handler in the driver as we push down. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds1-3/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
2008-10-16device create: video: convert device_create_drvdata to device_createGreg Kroah-Hartman1-3/+2
Now that device_create() has been audited, rename things back to the original call to be sane. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-16remove CONFIG_KMOD from driversJohannes Berg1-15/+2
Straight forward conversions to CONFIG_MODULE; many drivers include <linux/kmod.h> conditionally and then don't have any other conditional code so remove it from those. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: video4linux-list@redhat.com Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-ppp@vger.kernel.org Cc: dm-devel@redhat.com Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-09-23lcd: allow lcd device to handle mode change eventsEric Miao1-0/+1
Some LCD panels are capable of different resolutions, and is allowed to change at run-time, so to make "struct lcd_device" to be able to handle mode change events here. Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-20fbdefio: add set_page_dirty handler to deferred IO FBIan Campbell1-0/+4
Fixes kernel BUG at lib/radix-tree.c:473. Previously the handler was incidentally provided by tmpfs but this was removed with: commit 14fcc23fdc78e9d32372553ccf21758a9bd56fa1 Author: Hugh Dickins <hugh@veritas.com> Date: Mon Jul 28 15:46:19 2008 -0700 tmpfs: fix kernel BUG in shmem_delete_inode relying on this behaviour was incorrect in any case and the BUG also appeared when the device node was on an ext3 filesystem. v2: override a_ops at open() time rather than mmap() time to minimise races per AKPM's concerns. Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Hugh Dickins <hugh@veritas.com> Cc: Johannes Weiner <hannes@saeurebad.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Kel Modderman <kel@otaku42.de> Cc: Markus Armbruster <armbru@redhat.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: <stable@kernel.org> [14fcc23fd is in and] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26drivers/video/fbmem.c: removed duplicated includeHuang Weiyi1-1/+0
Removed duplicated include <linux/major.h> in drivers/video/fbmem.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24video/fb: cleanup FB_MAJOR usagePhilippe De Muyter1-0/+1
Currently, linux/major.h defines a GRAPHDEV_MAJOR (29) that nobody uses, and linux/fb.h defines the real FB_MAJOR (also 29), that only fbmem.c needs. Drop GRAPHDEV_MAJOR from major.h, move FB_MAJOR definition from fb.h to major.h, and fix fbmem.c to use major.h's definition. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-24fbdev: xoffset, yoffset and yres are unsignedVille Syrjala1-5/+4
The xoffset, yoffset and yres members of fb_var_screeninfo are __u32. Make them unsigned in the code as well. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-22device create: framebuffer: convert device_create to device_create_drvdataGreg Kroah-Hartman1-2/+3
device_create() is race-prone, so use the race-free device_create_drvdata() instead as device_create() is going away. Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-06-20fbmem: cdev lock_kernel() pushdownJonathan Corbet1-4/+11
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-04-28fb: convert /proc/fb to seq_file interfaceAlexey Dobriyan1-19/+44
Note: looks like accesses to "registered_fb" are done without any exclusion so there're none in new proc code, too. This should be fixed in separate patch. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28fbmem: fix con2fbmap limit checkPeter Samuelson1-1/+1
Fix limit check in FBIOPUT_CON2FBMAP ioctl. Signed-off-by: Peter Samuelson <peter@p12n.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28fb: add support for foreign endiannessAnton Vorontsov1-0/+30
Add support for the framebuffers with non-native endianness. This is done via FBINFO_FOREIGN_ENDIAN flag that will be used by the drivers. Depending on the host endianness this flag will be overwritten by FBINFO_BE_MATH internal flag, or cleared. Tested to work on MPC8360E-RDK (BE) + Fujitsu MINT framebuffer (LE). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: <Valdis.Kletnieks@vt.edu> Cc: Clemens Koller <clemens.koller@anagramm.de> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Privacy Policy