aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/video/omap2/dss/display.c
AgeCommit message (Collapse)AuthorFilesLines
2011-09-30OMAP: DSS2: Create an enum for DSI pixel formatsArchit Taneja1-2/+8
Currently, DSI pixel info is only represented by the pixel size in bits using the pixel_size parameter in omap_dss_device struct's ctrl member. This is not sufficient information for DSI video mode usage, as two of the supported formats(RGB666 loosely packed, and RGB888) have the same pixel container size, but different data_type values for the video mode packet header. Create enum "omap_dss_dsi_pixel_format" which describes the pixel data format the panel is configured for. Create helper function dsi_get_pixel_size() which returns the pixel size of the given pixel format. Modify functions omapdss_default_get_recommended_bpp() and dss_use_replication() to use dsi_get_pixel_size(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: string parsing cleanupsTomi Valkeinen1-12/+9
Use strtobool and kstrto* functions when parsing sysfs inputs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-01OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4Tomi Valkeinen1-7/+5
The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-01OMAP: DSS2: remove update_mode from omapdssTomi Valkeinen1-45/+0
Remove the whole update_mode stuff from omapdss driver. If automatic update for manual update displays is needed, it's better implemented in higher layers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-11OMAP: DSS2: Convert simple/strict_strto* to kstrto*Tomi Valkeinen1-15/+29
Convert simple/strict_strto* functions to kstrto* functions. Only simple cases are converted. simple_strto* uses are still left to places where it is used to parse numbers from a list of numbers. These need some other solution than kstrto*. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-11OMAP: DSS2: Move display.h to include/video/Tomi Valkeinen1-1/+1
arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS driver. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-16OMAP4: DSS2: HDMI: HDMI driver addition in the DSSMythri P K1-0/+3
Adding the hdmi interface driver(hdmi.c) to the dss driver. It configures the audio and video portion of HDMI based on functionality called by the panel driver. Signed-off-by: Mythri P K <mythripk@ti.com> Signed-off-by: Yong Zhi <y-zhi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-16OMAP4: DSS2: Add display type HDMI to DSS2Mythri P K1-0/+2
Adding display type HDMI in dss_features, overlay and the manager so that HDMI type of display will be recognized. Signed-off-by: Mythri P K <mythripk@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP: DSS2: Remove unused listTomi Valkeinen1-3/+0
There was an unused list defined in display.c. Remove it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP: DSS2: Clean up a switch-caseTomi Valkeinen1-24/+3
Support for the display interface was checked in a separate switch-case. There's no reason for that, and this patch handles the fail code path in the same switch-case where the display initialization is done. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2010-08-05OMAP: DSS2: Remove extra return statementArchit Taneja1-1/+0
Remove extra return statement in omapdss_default_get_recommended_bpp from overlay.c Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Check if display supports update mode changesVille Syrjälä1-0/+3
Check whether the display actually has the set_update_mode() function before calling it. Only the sysfs codepath was broken, the omapfb ioctl had the necessary protection. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-05-18OMAP: DSS2: Fix device disable when driver is not loadedJani Nikula1-1/+4
Only call driver disable when device isn't already disabled, which also handles the driver not loaded case. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-05-18OMAP: DSS2: Add Kconfig option for DPI display typeRoger Quadros1-0/+4
This allows us to disable DPI on systems that do not have it Signed-off-by: Roger Quadros <roger.quadros@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move timing functionsTomi Valkeinen1-5/+5
Move check/set/get_timings() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move set/get_wss()Tomi Valkeinen1-4/+4
Move set/get_wss() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move enable/disable/suspend/resumeTomi Valkeinen1-7/+7
Move enable/disable/suspend/resume from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move set/get_update_mode()Tomi Valkeinen1-3/+3
Move set/get_update_mode() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move enable/get_te()Tomi Valkeinen1-3/+4
Move enable/get_te() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move get_recommended_bpp()Tomi Valkeinen1-6/+2
Move get_recommended_bpp() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move get_resolution()Tomi Valkeinen1-2/+2
Move get_resolution() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move wait_vsync()Tomi Valkeinen1-14/+0
Move wait_vsync() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move get/set_rotate()Tomi Valkeinen1-4/+4
Move get/set_rotate() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move set/get_mirror()Tomi Valkeinen1-4/+4
Move set/get_mirror() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-18OMAP: DSS2: remove sub-panel systemTomi Valkeinen1-30/+2
The system to allow panel drivers to exists as attached to ctrl drivers did never work very well. It is not useed, and this patch removes it to make the driver cleaner. For now, controller drivers need to include also the panel driver code. In the future a proper mechanism for this should be developed, perhaps by creating busses for controllers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-12-09OMAP: DSS2: Add more core filesTomi Valkeinen1-0/+671
Add more core files to DSS2. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>

Privacy Policy