aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/video/omap2/dss/manager.c
AgeCommit message (Collapse)AuthorFilesLines
2011-10-03OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility settingArchit Taneja1-9/+19
On OMAP3, in order to enable alpha blending for LCD and TV managers, we needed to set LCDALPHABLENDERENABLE/TVALPHABLENDERENABLE bits in DISPC_CONFIG. On OMAP4, alpha blending is always enabled by default, if the above bits are set, we switch to an OMAP3 compatibility mode where the zorder values in the pipeline attribute registers are ignored and a fixed priority is configured. Rename the manager_info member "alpha_enabled" to "partial_alpha_enabled" for more clarity. Introduce two dss_features FEAT_ALPHA_FIXED_ZORDER and FEAT_ALPHA_FREE_ZORDER which represent OMAP3-alpha compatibility mode and OMAP4 alpha mode respectively. Introduce an overlay cap for ZORDER. The DSS2 user is expected to check for the ZORDER cap, if an overlay doesn't have this cap, the user is expected to set the parameter partial_alpha_enabled. If the overlay has ZORDER cap, the DSS2 user can assume that alpha blending is already enabled. Don't support OMAP3 compatibility mode for now. Trying to read/write to alpha_blending_enabled sysfs attribute issues a warning for OMAP4 and does not set the LCDALPHABLENDERENABLE/TVALPHABLENDERENABLE bits. Change alpha_enabled to partial_alpha_enabled in the omap_vout driver. Use overlay cap "OMAP_DSS_OVL_CAP_GLOBAL_ALPHA" to check if overlay supports alpha blending or not. Replace this with checks for VIDEO1 pipeline. Cc: linux-media@vger.kernel.org Cc: Lajos Molnar <molnar@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: DISPC: Pass overlay params as arguments to dispc_ovl_setup()Archit Taneja1-5/+2
dispc_ovl_enable_replication() and dispc_ovl_set_fifo_threshold() are currently called in configure_overlay(). These are the only functions which cause DISPC register writes of overlay parameters outside of dispc_ovl_setup(). Move these to dispc_ovl_setup() and pass replication, fifo_low and fifo_high thresholds as arguments to dispc_ovl_setup() in order to be aligned with other overlay parameters. No functional changes are made. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: DISPC: Reduce the number of arguments in dispc_ovl_setup()Archit Taneja1-16/+12
dispc_ovl_setup() currently takes a large number of overlay arguments, most of these are members of the overlay_info struct. Replace these arguments by passing a overlay_info pointer instead. In configure_overlay(), we create an overlay_info struct called new_oi, this is a copy of the overlay cache's overlay_info member. Update the new_oi parameters which could have been possibly changed in configure_overlay(). Pass its pointer pointer to dispc_ovl_setup(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: DISPC: rename manager related funcsTomi Valkeinen1-12/+12
Rename dispc's manager related functions as follows: - Remove prepending underscores, which were originally used to inform that the clocks needs to be enabled. This meaning is no longer valid. - Prepend the functions with dispc_mgr_* - Remove "channel" from the name, e.g. dispc_enable_channel -> dispc_mgr_enable The idea is to group manager related functions so that it can be deduced from the function name that it writes to manager spesific registers. All dispc_mgr_* functions have enum omap_channel as the first parameter. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: DISPC: rename overlay related funcsTomi Valkeinen1-10/+10
Rename dispc's overlay related functions as follows: - Remove prepending underscores, which were originally used to inform that the clocks needs to be enabled. This meaning is no longer valid. - Prepend the functions with dispc_ovl_* - Remove "plane" from the name, e.g. dispc_set_plane_ba0 -> dispc_ovl_set_ba0 The idea is to group overlay related functions so that it can be deduced from the function name that it writes to overlay spesific registers. All dispc_ovl_* functions have enum omap_plane as the first parameter. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: string parsing cleanupsTomi Valkeinen1-18/+19
Use strtobool and kstrto* functions when parsing sysfs inputs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: Remove support for non-DISPC overlaysTomi Valkeinen1-46/+1
Remove support for non-DISPC overlays and overlay managers. The support to possibly have non-DISPC overlays and managers was made to make it possible to use CPU and/or sDMA to update RFBI or DSI command mode displays. It is ok to remove the support, because: - No one has used the feature. - Display update without DISPC is very slow, so it is debatable if the update would even be usable. - Removal cleans up code. - If such a feature is needed later, it is better implemented outside omapdss driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Archit Taneja <archit@ti.com>
2011-09-30OMAP: DSS2: Handle manager change in applyTomi Valkeinen1-0/+5
Currently when changing the manager of an overlay, set_manager() directly calls dispc to set the overlay's destination. Change this to be more in line with other overlay configurations, and this will also remove the need to have dispc clocks enabled when calling set_manager(). A new field is added to overlay struct, "manager_changed". This is similar to "display_changed" field in manager struct, and is used to inform apply that the manager has changed and thus write to the registers is needed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: Don't allow moving managers away from enabled displaysDaniel Morsing1-0/+7
If a manager is moved while attached to an enabled display, the DSS system will be left in an inconsistent state. This will eventually cause a kernel oops when the enabled display is disabled. Fix this by not allowing the user to move a manager away from an enabled display. Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-25OMAP: DSS2: Use PM runtime & HWMOD supportTomi Valkeinen1-2/+6
Use PM runtime and HWMOD support to handle enabling and disabling of DSS modules. Each DSS module will have get and put functions which can be used to enable and disable that module. The functions use pm_runtime and hwmod opt-clocks to enable the hardware. Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-01OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4Tomi Valkeinen1-6/+6
The DMA FIFO threshold registers and burst size registers have changed for OMAP4. The current code only handles OMAP2/3 case, and so the values are a bit off for OMAP4. A summary of the differences between OMAP2/3 and OMAP4: Burst size: OMAP2/3: 4 x 32 bits / 8 x 32 bits / 16 x 32 bits OMAP4: 2 x 128 bits / 4 x 128 bits / 8 x 128 bits Threshold size: OMAP2/3: in bytes (8 bit units) OMAP4: in 128bit units This patch fixes the issue by creating two new helper functions in dss_features: dss_feat_get_buffer_size_unit() and dss_feat_get_burst_size_unit(). These return (in bytes) the unit size for threshold registers and unit size for burst size register, respectively, and are used to calculate correct values. For the threshold size the usage is straightforward. However, the burst size register has different multipliers for OMAP2/3 and OMAP4. This patch solves the problem by defining the multipliers for the burst size as 2x, 4x and 8x, which fit fine for the OMAP4 burst size definition (i.e. burst size unit for OMAP4 is 128bits), but requires a slight twist on OMAP2/3 by defining the burst size unit as 64bit. As the driver in practice always uses the maximum burst size, and no use case currently exists where we would want to use a smaller burst size, this patch changes the driver to hardcode the burst size when initializing DISPC. This makes the threshold configuration code somewhat simpler. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-01OMAP: DSS2: Add Color Phase Rotation supportTomi Valkeinen1-0/+114
Add Color Phase Rotation (CPR) support and sysfs files to enable CPR and to set the CPR coefficient matrix. CPR is enabled via manager?/cpr_enable file, and the coefficient matrix is set via manager?/cpr_coef file. The values in cpr_coef are in the following order: RR RG RB GR GG GB BR BG BB Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-01OMAP: DSS: Minor cleanup in ovl and mgr cache structsNishant Kamat1-96/+62
The overlay_cache_data and manager_cache_data structs include the elements of omap_overlay_info and omap_overlay_manager_info structs respectively. Include the structs instead of the individual elements to reduce code. Signed-off-by: Nishant Kamat <nskamat@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-07-01OMAP: DSS2: remove update_mode from omapdssTomi Valkeinen1-45/+14
Remove the whole update_mode stuff from omapdss driver. If automatic update for manual update displays is needed, it's better implemented in higher layers. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-23OMAP: DSS2: Add support for NV12 formatAmber Jain1-1/+4
Add the support for NV12 color format. Configure base address for UV component of NV12 color format. Change the way chroma scaling is handled for YUV formats on OMAP4 by enabling chroma-resampling for video pipeline and hence using FIR2 register set for scaling UV. Changes to _dispc_set_scaling(), because of the reason above, are: - call _dispc_set_scaling_common() to handle scaling for all color formats except for OMAP4 where it only handles scaling for RGB or Y-component - call _dispc_set_scaling_uv() for special handling required for UV component on OMAP4. - dispc_set_scaling_uv() also resets chroma-resampling bit for RGB color modes. Contains chroma scaling (_dispc_set_scaling_uv) design and implemented by Lajos Molnar <molnar@ti.com> Signed-off-by: Amber Jain <amber@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-23OMAP: DSS2: Add new color formats for OMAP4Amber Jain1-0/+7
Add new color formats supported by OMAP4: NV12, RGBA16, RGBX16, ARGB16_1555, XRGB16_1555. NV12 color format is defined here, its support in DSS will be added separately. Signed-off-by: Amber Jain <amber@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-05-11OMAP: DSS2: Move display.h to include/video/Tomi Valkeinen1-1/+1
arch/arm/plat-omap/include/plat/display.h is an include for the OMAP DSS driver. A more logical place for it is in include/video. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-16OMAP4: DSS2: Add display type HDMI to DSS2Mythri P K1-2/+7
Adding display type HDMI in dss_features, overlay and the manager so that HDMI type of display will be recognized. Signed-off-by: Mythri P K <mythripk@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-03-11OMAP2PLUS: DSS2: Generalize naming of PRCM related clock enums in DSS driverArchit Taneja1-2/+2
enum dss_clock structure is replaced with generic names that could be used across OMAP2420, 2430, 3xxx, 44xx platforms. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-01-10OMAP: DSS2: Introduce omap_channel as an omap_dss_device parameter, add new ↵Sumit Semwal1-29/+48
overlay manager. A panel connects to one of the overlay managers of DSS through some interface block. On OMAP4, specifying the type of the display is not sufficient to conclude which manager the panel should be connected to. Hence, a new member 'channel' is introduced in omap_dss_device structure to determine which manager the panel uses. The dss_recheck_connections() called in dss_driver_probe() uses this channel parameter to set the correct manager to the corresponding omap_dss_device. The channel parameter is used only once to ensure the correct managers are set for each panel. The parameter dssdev->manager->id will take care of ensuring that the panel and then the interface driver configures the correct DISPC channel. Also, add a new Overlay Manager in manager.c, make other changes needed for LCD2 channel. Signed-off-by: Sumit Semwal <sumit.semwal@ti.com> Signed-off-by: Mukund Mittal <mmittal@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2011-01-10OMAP3630: DSS2: Enable Pre-Multiplied Alpha SupportRajkumar N1-1/+4
Enable dss to process color formats with pre-mulitplied alpha. With this we can have alpha values defined for each pixel and hence can have different blending values for each pixel. sysfs entry has been created for this and pre-multiplied alpha support is turned off by default. Signed-off-by: Sudeep Basavaraj <sudeep.basavaraj@ti.com> Signed-off-by: Rajkumar N <rajkumar.nagarajan@ti.com> Signed-off-by: Samreen <samreen@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-10-22OMAP: DSS2: Use dss_features framework on DSS2 codeArchit Taneja1-17/+16
Calls init functions of dss_features during dss_probe, and the following features are made omapxxxx independent: - number of managers, overlays - supported color modes for each overlay - supported displays for each manager - global aplha, and restriction of global alpha for video1 pipeline - The register field ranges : FIRHINC, FIRVINC, FIFOHIGHTHRESHOLD FIFOLOWTHRESHOLD and FIFOSIZE Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-05OMAP: DSS2: adjust YUV overlay width to be evenTomi Valkeinen1-0/+15
An overlay in YUV mode has to have an even input width, because data for each pixel is divided between two adjacent pixels. The algorithm handling manual update overlay adjusting may adjust the overlay width to be odd. This patch adds a check for that situation, and makes the width even. The width is increased by one if it is possible (the unadjusted input width is larger than the width), and decreased by one if increasing is not possible. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-05OMAP: DSS2: change manual update scaling setupTomi Valkeinen1-29/+40
Currently the update area on manual update displays is automatically enlargened to fully cover scaled overlays. This patch makes that optional, allowing the panel driver to choose if it's used or not. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Fix update area calculations with multiple scaled overlaysTomi Valkeinen1-63/+78
When there are multiple scaled overlays simply checking whether the update area intersects any of them in order is not enough. If eg. VID1 starts out completely outside the update area but VID2 causes the update area to increase in such a way that VID1 now falls partially within the increased update area VID1 should be rechecked and the update area possibly increased even further to fully encompass VID1. So simply keep looping over the overlays until such time that none of the overlays caused the update area to change. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-08-03OMAP: DSS2: Make wait_for_go() succeed for disabled displaysVille Syrjälä1-2/+5
When the display is not active make the wait_for_go() functions return immediately. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-05-18OMAP2: DSS: Add missing line for update bg colorCarlos Lopez1-0/+1
The driver set the background color canvas but never writes it in DISPC_DEFAULT_COLOR_m register, which changes the background color on the LCD or TV. This patch adds a line to call to dispc_set_default_color() which is the function in charge to write the DISPC_DEFAULT_COLOR_m register. Signed-off-by: Carlos Lopez <carlos.cruz@sasken.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-05-18OMAP: DSS2: Make partial update width evenTomi Valkeinen1-0/+20
There are some strange problems with DSI and updates with odd widths. One particular problem is that HS TX timeout triggers easily with updates with odd widths. This patch makes the updates widths even, circumventing the problem. There should be no ill side effects with increasing the update area slightly to make the width even. Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-07Driver core: Constify struct sysfs_ops in struct kobj_typeEmese Revfy1-1/+1
Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: David Teigland <teigland@redhat.com> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-24OMAP: DSS2: move set/get_update_mode()Tomi Valkeinen1-7/+10
Move set/get_update_mode() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move enable/disable_channel to overlay managerTomi Valkeinen1-1/+16
Move enable/disable_channel() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2010-02-24OMAP: DSS2: move wait_vsync()Tomi Valkeinen1-0/+14
Move wait_vsync() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
2009-12-09OMAP: DSS2: Add more core filesTomi Valkeinen1-0/+1487
Add more core files to DSS2. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>

Privacy Policy