aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-07-26 18:38:13 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2013-07-26 18:38:13 (GMT)
commitdb8cbfadcf9073cc6401ebcf90392c5ce6e93f34 (patch)
tree9a4c4bc4697d22ad7cb797b46d107a5ab3b4e73f
parentab20fb8139b9b3f8abcf83bbddddcc1a757a9247 (diff)
parent2c7b871b9102c497ba8f972aa5d38532f05b654d (diff)
Merge tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH: "Here are a number of USB fixes for 3.11-rc3. Lots of little things, nothing major. A number of new device ids, build fixes for DMA, and a bunch of other minor things. All of these have been in the linux-next tree" * tag 'usb-3.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits) usb: Clear both buffers when clearing a control transfer TT buffer. usb/gadget: free opts struct on error recovery USB: mos7840: fix memory leak in open usb: serial: option.c: remove ONDA MT825UP product ID fromdriver usb: serial: option: add Olivetti Olicard 200 usb: serial: option: blacklist ONDA MT689DC QMI interface xhci: fix null pointer dereference on ring_doorbell_for_active_rings usb: host: xhci: Enable XHCI_SPURIOUS_SUCCESS for all controllers with xhci 1.0 usb: fix build warning in pci-quirks.h when CONFIG_PCI is not enabled usb: xhci: Mark two functions __maybe_unused xhci: Avoid NULL pointer deref when host dies. usb: serial: option: Add ONYX 3G device support USB: ti_usb_3410_5052: fix dynamic-id matching usb: option: add TP-LINK MA260 USB: option: add D-Link DWM-152/C1 and DWM-156/C1 USB: EHCI: Fix resume signalling on remote wakeup USB: cp210x: add MMB and PI ZigBee USB Device Support usb: cp210x support SEL C662 Vendor/Device USB: option: append Petatel NP10T device to GSM modems list USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga ...
-rw-r--r--drivers/usb/core/hub.c48
-rw-r--r--drivers/usb/core/hub.h3
-rw-r--r--drivers/usb/dwc3/Kconfig2
-rw-r--r--drivers/usb/dwc3/core.c2
-rw-r--r--drivers/usb/dwc3/core.h4
-rw-r--r--drivers/usb/dwc3/gadget.c1
-rw-r--r--drivers/usb/gadget/Kconfig5
-rw-r--r--drivers/usb/gadget/at91_udc.c16
-rw-r--r--drivers/usb/gadget/f_ecm.c7
-rw-r--r--drivers/usb/gadget/f_eem.c7
-rw-r--r--drivers/usb/gadget/f_ncm.c7
-rw-r--r--drivers/usb/gadget/f_phonet.c7
-rw-r--r--drivers/usb/gadget/f_rndis.c7
-rw-r--r--drivers/usb/gadget/f_subset.c7
-rw-r--r--drivers/usb/gadget/fotg210-udc.c4
-rw-r--r--drivers/usb/gadget/mv_u3d_core.c4
-rw-r--r--drivers/usb/gadget/udc-core.c6
-rw-r--r--drivers/usb/host/ehci-hub.c1
-rw-r--r--drivers/usb/host/pci-quirks.h1
-rw-r--r--drivers/usb/host/xhci-pci.c1
-rw-r--r--drivers/usb/host/xhci-ring.c2
-rw-r--r--drivers/usb/host/xhci.c17
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb.c1
-rw-r--r--drivers/usb/phy/phy-omap-usb3.c2
-rw-r--r--drivers/usb/phy/phy-samsung-usb2.c2
-rw-r--r--drivers/usb/renesas_usbhs/mod_gadget.c4
-rw-r--r--drivers/usb/serial/cp210x.c4
-rw-r--r--drivers/usb/serial/mos7840.c25
-rw-r--r--drivers/usb/serial/option.c23
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c2
-rw-r--r--drivers/usb/storage/unusual_devs.h7
-rw-r--r--include/linux/usb.h11
-rw-r--r--include/uapi/linux/usb/ch11.h11
33 files changed, 172 insertions, 79 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4191db3..4a8a1d6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -668,6 +668,15 @@ resubmit:
static inline int
hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
{
+ /* Need to clear both directions for control ep */
+ if (((devinfo >> 11) & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_CONTROL) {
+ int status = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+ HUB_CLEAR_TT_BUFFER, USB_RT_PORT,
+ devinfo ^ 0x8000, tt, NULL, 0, 1000);
+ if (status)
+ return status;
+ }
return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo,
tt, NULL, 0, 1000);
@@ -2848,6 +2857,15 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev)
USB_CTRL_SET_TIMEOUT);
}
+/* Count of wakeup-enabled devices at or below udev */
+static unsigned wakeup_enabled_descendants(struct usb_device *udev)
+{
+ struct usb_hub *hub = usb_hub_to_struct_hub(udev);
+
+ return udev->do_remote_wakeup +
+ (hub ? hub->wakeup_enabled_descendants : 0);
+}
+
/*
* usb_port_suspend - suspend a usb device's upstream port
* @udev: device that's no longer in active use, not a root hub
@@ -2888,8 +2906,8 @@ static int usb_disable_function_remotewakeup(struct usb_device *udev)
* Linux (2.6) currently has NO mechanisms to initiate that: no khubd
* timer, no SRP, no requests through sysfs.
*
- * If Runtime PM isn't enabled or used, non-SuperSpeed devices really get
- * suspended only when their bus goes into global suspend (i.e., the root
+ * If Runtime PM isn't enabled or used, non-SuperSpeed devices may not get
+ * suspended until their bus goes into global suspend (i.e., the root
* hub is suspended). Nevertheless, we change @udev->state to
* USB_STATE_SUSPENDED as this is the device's "logical" state. The actual
* upstream port setting is stored in @udev->port_is_suspended.
@@ -2960,15 +2978,21 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
/* see 7.1.7.6 */
if (hub_is_superspeed(hub->hdev))
status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U3);
- else if (PMSG_IS_AUTO(msg))
- status = set_port_feature(hub->hdev, port1,
- USB_PORT_FEAT_SUSPEND);
+
/*
* For system suspend, we do not need to enable the suspend feature
* on individual USB-2 ports. The devices will automatically go
* into suspend a few ms after the root hub stops sending packets.
* The USB 2.0 spec calls this "global suspend".
+ *
+ * However, many USB hubs have a bug: They don't relay wakeup requests
+ * from a downstream port if the port's suspend feature isn't on.
+ * Therefore we will turn on the suspend feature if udev or any of its
+ * descendants is enabled for remote wakeup.
*/
+ else if (PMSG_IS_AUTO(msg) || wakeup_enabled_descendants(udev) > 0)
+ status = set_port_feature(hub->hdev, port1,
+ USB_PORT_FEAT_SUSPEND);
else {
really_suspend = false;
status = 0;
@@ -3003,15 +3027,16 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
if (!PMSG_IS_AUTO(msg))
status = 0;
} else {
- /* device has up to 10 msec to fully suspend */
dev_dbg(&udev->dev, "usb %ssuspend, wakeup %d\n",
(PMSG_IS_AUTO(msg) ? "auto-" : ""),
udev->do_remote_wakeup);
- usb_set_device_state(udev, USB_STATE_SUSPENDED);
if (really_suspend) {
udev->port_is_suspended = 1;
+
+ /* device has up to 10 msec to fully suspend */
msleep(10);
}
+ usb_set_device_state(udev, USB_STATE_SUSPENDED);
}
/*
@@ -3293,7 +3318,11 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
unsigned port1;
int status;
- /* Warn if children aren't already suspended */
+ /*
+ * Warn if children aren't already suspended.
+ * Also, add up the number of wakeup-enabled descendants.
+ */
+ hub->wakeup_enabled_descendants = 0;
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
@@ -3303,6 +3332,9 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
if (PMSG_IS_AUTO(msg))
return -EBUSY;
}
+ if (udev)
+ hub->wakeup_enabled_descendants +=
+ wakeup_enabled_descendants(udev);
}
if (hdev->do_remote_wakeup && hub->quirk_check_port_auto_suspend) {
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 6508e02..4e4790d 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -59,6 +59,9 @@ struct usb_hub {
struct usb_tt tt; /* Transaction Translator */
unsigned mA_per_port; /* current for each child */
+#ifdef CONFIG_PM
+ unsigned wakeup_enabled_descendants;
+#endif
unsigned limited_power:1;
unsigned quiescing:1;
diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 757aa18..2378958 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -1,6 +1,6 @@
config USB_DWC3
tristate "DesignWare USB3 DRD Core Support"
- depends on (USB || USB_GADGET) && GENERIC_HARDIRQS
+ depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
help
Say Y or M here if your system has a Dual Role SuperSpeed
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c35d49d..358375e 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -450,7 +450,7 @@ static int dwc3_probe(struct platform_device *pdev)
}
if (IS_ERR(dwc->usb3_phy)) {
- ret = PTR_ERR(dwc->usb2_phy);
+ ret = PTR_ERR(dwc->usb3_phy);
/*
* if -ENXIO is returned, it means PHY layer wasn't
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index b69d322..27dad99 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -759,8 +759,8 @@ struct dwc3 {
struct dwc3_event_type {
u32 is_devspec:1;
- u32 type:6;
- u32 reserved8_31:25;
+ u32 type:7;
+ u32 reserved8_31:24;
} __packed;
#define DWC3_DEPEVT_XFERCOMPLETE 0x01
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index b5e5b35..f77083f 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1584,6 +1584,7 @@ err1:
__dwc3_gadget_ep_disable(dwc->eps[0]);
err0:
+ dwc->gadget_driver = NULL;
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 62f6802..8e93683 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -193,6 +193,7 @@ config USB_FUSB300
Faraday usb device controller FUSB300 driver
config USB_FOTG210_UDC
+ depends on HAS_DMA
tristate "Faraday FOTG210 USB Peripheral Controller"
help
Faraday USB2.0 OTG controller which can be configured as
@@ -328,13 +329,14 @@ config USB_S3C_HSUDC
config USB_MV_UDC
tristate "Marvell USB2.0 Device Controller"
- depends on GENERIC_HARDIRQS
+ depends on GENERIC_HARDIRQS && HAS_DMA
help
Marvell Socs (including PXA and MMP series) include a high speed
USB2.0 OTG controller, which can be configured as high speed or
full speed USB peripheral.
config USB_MV_U3D
+ depends on HAS_DMA
tristate "MARVELL PXA2128 USB 3.0 controller"
help
MARVELL PXA2128 Processor series include a super speed USB3.0 device
@@ -639,6 +641,7 @@ config USB_CONFIGFS_RNDIS
depends on USB_CONFIGFS
depends on NET
select USB_U_ETHER
+ select USB_U_RNDIS
select USB_F_RNDIS
help
Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 073b938..d9a6add0 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -870,8 +870,8 @@ static void clk_on(struct at91_udc *udc)
if (udc->clocked)
return;
udc->clocked = 1;
- clk_enable(udc->iclk);
- clk_enable(udc->fclk);
+ clk_prepare_enable(udc->iclk);
+ clk_prepare_enable(udc->fclk);
}
static void clk_off(struct at91_udc *udc)
@@ -880,8 +880,8 @@ static void clk_off(struct at91_udc *udc)
return;
udc->clocked = 0;
udc->gadget.speed = USB_SPEED_UNKNOWN;
- clk_disable(udc->fclk);
- clk_disable(udc->iclk);
+ clk_disable_unprepare(udc->fclk);
+ clk_disable_unprepare(udc->iclk);
}
/*
@@ -1725,7 +1725,7 @@ static int at91udc_probe(struct platform_device *pdev)
/* init software state */
udc = &controller;
udc->gadget.dev.parent = dev;
- if (pdev->dev.of_node)
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node)
at91udc_of_init(udc, pdev->dev.of_node);
else
memcpy(&udc->board, dev->platform_data,
@@ -1782,12 +1782,14 @@ static int at91udc_probe(struct platform_device *pdev)
}
/* don't do anything until we have both gadget driver and VBUS */
- clk_enable(udc->iclk);
+ retval = clk_prepare_enable(udc->iclk);
+ if (retval)
+ goto fail1;
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
/* Clear all pending interrupts - UDP may be used by bootloader. */
at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
- clk_disable(udc->iclk);
+ clk_disable_unprepare(udc->iclk);
/* request UDC and maybe VBUS irqs */
udc->udp_irq = platform_get_irq(pdev, 0);
diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c
index 5d3561e..edab45d 100644
--- a/drivers/usb/gadget/f_ecm.c
+++ b/drivers/usb/gadget/f_ecm.c
@@ -959,8 +959,11 @@ static struct usb_function_instance *ecm_alloc_inst(void)
mutex_init(&opts->lock);
opts->func_inst.free_func_inst = ecm_free_inst;
opts->net = gether_setup_default();
- if (IS_ERR(opts->net))
- return ERR_PTR(PTR_ERR(opts->net));
+ if (IS_ERR(opts->net)) {
+ struct net_device *net = opts->net;
+ kfree(opts);
+ return ERR_CAST(net);
+ }
config_group_init_type_name(&opts->func_inst.group, "", &ecm_func_type);
diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c
index 90ee802..d00392d 100644
--- a/drivers/usb/gadget/f_eem.c
+++ b/drivers/usb/gadget/f_eem.c
@@ -593,8 +593,11 @@ static struct usb_function_instance *eem_alloc_inst(void)
mutex_init(&opts->lock);
opts->func_inst.free_func_inst = eem_free_inst;
opts->net = gether_setup_default();
- if (IS_ERR(opts->net))
- return ERR_CAST(opts->net);
+ if (IS_ERR(opts->net)) {
+ struct net_device *net = opts->net;
+ kfree(opts);
+ return ERR_CAST(net);
+ }
config_group_init_type_name(&opts->func_inst.group, "", &eem_func_type);
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 952177f..1c28fe1 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -1350,8 +1350,11 @@ static struct usb_function_instance *ncm_alloc_inst(void)
mutex_init(&opts->lock);
opts->func_inst.free_func_inst = ncm_free_inst;
opts->net = gether_setup_default();
- if (IS_ERR(opts->net))
- return ERR_PTR(PTR_ERR(opts->net));
+ if (IS_ERR(opts->net)) {
+ struct net_device *net = opts->net;
+ kfree(opts);
+ return ERR_CAST(net);
+ }
config_group_init_type_name(&opts->func_inst.group, "", &ncm_func_type);
diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c
index 7944fb0..1bf26e9 100644
--- a/drivers/usb/gadget/f_phonet.c
+++ b/drivers/usb/gadget/f_phonet.c
@@ -656,8 +656,11 @@ static struct usb_function_instance *phonet_alloc_inst(void)
opts->func_inst.free_func_inst = phonet_free_inst;
opts->net = gphonet_setup_default();
- if (IS_ERR(opts->net))
- return ERR_PTR(PTR_ERR(opts->net));
+ if (IS_ERR(opts->net)) {
+ struct net_device *net = opts->net;
+ kfree(opts);
+ return ERR_CAST(net);
+ }
config_group_init_type_name(&opts->func_inst.group, "",
&phonet_func_type);
diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c
index 191df35..717ed7f 100644
--- a/drivers/usb/gadget/f_rndis.c
+++ b/drivers/usb/gadget/f_rndis.c
@@ -963,8 +963,11 @@ static struct usb_function_instance *rndis_alloc_inst(void)
mutex_init(&opts->lock);
opts->func_inst.free_func_inst = rndis_free_inst;
opts->net = gether_setup_default();
- if (IS_ERR(opts->net))
- return ERR_CAST(opts->net);
+ if (IS_ERR(opts->net)) {
+ struct net_device *net = opts->net;
+ kfree(opts);
+ return ERR_CAST(net);
+ }
config_group_init_type_name(&opts->func_inst.group, "",
&rndis_func_type);
diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c
index 5601e1d..7c8674f 100644
--- a/drivers/usb/gadget/f_subset.c
+++ b/drivers/usb/gadget/f_subset.c
@@ -505,8 +505,11 @@ static struct usb_function_instance *geth_alloc_inst(void)
mutex_init(&opts->lock);
opts->func_inst.free_func_inst = geth_free_inst;
opts->net = gether_setup_default();
- if (IS_ERR(opts->net))
- return ERR_CAST(opts->net);
+ if (IS_ERR(opts->net)) {
+ struct net_device *net = opts->net;
+ kfree(opts);
+ return ERR_CAST(net);
+ }
config_group_init_type_name(&opts->func_inst.group, "",
&gether_func_type);
diff --git a/drivers/usb/gadget/fotg210-udc.c b/drivers/usb/gadget/fotg210-udc.c
index cce5535..10cd18d 100644
--- a/drivers/usb/gadget/fotg210-udc.c
+++ b/drivers/usb/gadget/fotg210-udc.c
@@ -1074,7 +1074,7 @@ static struct usb_gadget_ops fotg210_gadget_ops = {
.udc_stop = fotg210_udc_stop,
};
-static int __exit fotg210_udc_remove(struct platform_device *pdev)
+static int fotg210_udc_remove(struct platform_device *pdev)
{
struct fotg210_udc *fotg210 = dev_get_drvdata(&pdev->dev);
@@ -1088,7 +1088,7 @@ static int __exit fotg210_udc_remove(struct platform_device *pdev)
return 0;
}
-static int __init fotg210_udc_probe(struct platform_device *pdev)
+static int fotg210_udc_probe(struct platform_device *pdev)
{
struct resource *res, *ires;
struct fotg210_udc *fotg210 = NULL;
diff --git a/drivers/usb/gadget/mv_u3d_core.c b/drivers/usb/gadget/mv_u3d_core.c
index 07fdb3e..ec6a2d2 100644
--- a/drivers/usb/gadget/mv_u3d_core.c
+++ b/drivers/usb/gadget/mv_u3d_core.c
@@ -1776,7 +1776,7 @@ static int mv_u3d_remove(struct platform_device *dev)
kfree(u3d->eps);
if (u3d->irq)
- free_irq(u3d->irq, &dev->dev);
+ free_irq(u3d->irq, u3d);
if (u3d->cap_regs)
iounmap(u3d->cap_regs);
@@ -1974,7 +1974,7 @@ static int mv_u3d_probe(struct platform_device *dev)
return 0;
err_unregister:
- free_irq(u3d->irq, &dev->dev);
+ free_irq(u3d->irq, u3d);
err_request_irq:
err_get_irq:
kfree(u3d->status_req);
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
index ffd8fa5..c28ac98 100644
--- a/drivers/usb/gadget/udc-core.c
+++ b/drivers/usb/gadget/udc-core.c
@@ -50,6 +50,8 @@ static DEFINE_MUTEX(udc_lock);
/* ------------------------------------------------------------------------- */
+#ifdef CONFIG_HAS_DMA
+
int usb_gadget_map_request(struct usb_gadget *gadget,
struct usb_request *req, int is_in)
{
@@ -99,6 +101,8 @@ void usb_gadget_unmap_request(struct usb_gadget *gadget,
}
EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
+#endif /* CONFIG_HAS_DMA */
+
/* ------------------------------------------------------------------------- */
void usb_gadget_set_state(struct usb_gadget *gadget,
@@ -194,9 +198,11 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
dev_set_name(&gadget->dev, "gadget");
gadget->dev.parent = parent;
+#ifdef CONFIG_HAS_DMA
dma_set_coherent_mask(&gadget->dev, parent->coherent_dma_mask);
gadget->dev.dma_parms = parent->dma_parms;
gadget->dev.dma_mask = parent->dma_mask;
+#endif
if (release)
gadget->dev.release = release;
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 2b70277..6dce375 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -874,6 +874,7 @@ static int ehci_hub_control (
ehci->reset_done[wIndex] = jiffies
+ msecs_to_jiffies(20);
usb_hcd_start_port_resume(&hcd->self, wIndex);
+ set_bit(wIndex, &ehci->resuming_ports);
/* check the port again */
mod_timer(&ehci_to_hcd(ehci)->rh_timer,
ehci->reset_done[wIndex]);
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 4b8a209..978c849 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -13,6 +13,7 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
void usb_disable_xhci_ports(struct pci_dev *xhci_pdev);
void sb800_prefetch(struct device *dev, int on);
#else
+struct pci_dev;
static inline void usb_amd_quirk_pll_disable(void) {}
static inline void usb_amd_quirk_pll_enable(void) {}
static inline void usb_amd_dev_put(void) {}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index cc24e39..f00cb20 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -93,7 +93,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
- xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
xhci->limit_active_eps = 64;
xhci->quirks |= XHCI_SW_BW_CHECKING;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 1e57eaf..5b08cd8 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -434,7 +434,7 @@ static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
/* A ring has pending URBs if its TD list is not empty */
if (!(ep->ep_state & EP_HAS_STREAMS)) {
- if (!(list_empty(&ep->ring->td_list)))
+ if (ep->ring && !(list_empty(&ep->ring->td_list)))
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
return;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 2c49f00..41eb4fc 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -329,7 +329,7 @@ static void xhci_cleanup_msix(struct xhci_hcd *xhci)
return;
}
-static void xhci_msix_sync_irqs(struct xhci_hcd *xhci)
+static void __maybe_unused xhci_msix_sync_irqs(struct xhci_hcd *xhci)
{
int i;
@@ -1181,9 +1181,6 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
}
xhci = hcd_to_xhci(hcd);
- if (xhci->xhc_state & XHCI_STATE_HALTED)
- return -ENODEV;
-
if (check_virt_dev) {
if (!udev->slot_id || !xhci->devs[udev->slot_id]) {
printk(KERN_DEBUG "xHCI %s called with unaddressed "
@@ -1199,6 +1196,9 @@ static int xhci_check_args(struct usb_hcd *hcd, struct usb_device *udev,
}
}
+ if (xhci->xhc_state & XHCI_STATE_HALTED)
+ return -ENODEV;
+
return 1;
}
@@ -3898,7 +3898,7 @@ int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
* Issue an Evaluate Context command to change the Maximum Exit Latency in the
* slot context. If that succeeds, store the new MEL in the xhci_virt_device.
*/
-static int xhci_change_max_exit_latency(struct xhci_hcd *xhci,
+static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
struct usb_device *udev, u16 max_exit_latency)
{
struct xhci_virt_device *virt_dev;
@@ -4892,6 +4892,13 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
get_quirks(dev, xhci);
+ /* In xhci controllers which follow xhci 1.0 spec gives a spurious
+ * success event after a short transfer. This quirk will ignore such
+ * spurious event.
+ */
+ if (xhci->hci_version > 0x96)
+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
if (retval)
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index c21386e..de98906 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3247,6 +3247,7 @@ static const struct usb_device_id sisusb_table[] = {
{ USB_DEVICE(0x0711, 0x0903) },
{ USB_DEVICE(0x0711, 0x0918) },
{ USB_DEVICE(0x0711, 0x0920) },
+ { USB_DEVICE(0x0711, 0x0950) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c
index efe6e14..a2fb30b 100644
--- a/drivers/usb/phy/phy-omap-usb3.c
+++ b/drivers/usb/phy/phy-omap-usb3.c
@@ -71,9 +71,9 @@ static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = {
{1250, 5, 4, 20, 0}, /* 12 MHz */
{3125, 20, 4, 20, 0}, /* 16.8 MHz */
{1172, 8, 4, 20, 65537}, /* 19.2 MHz */
+ {1000, 7, 4, 10, 0}, /* 20 MHz */
{1250, 12, 4, 20, 0}, /* 26 MHz */
{3125, 47, 4, 20, 92843}, /* 38.4 MHz */
- {1000, 7, 4, 10, 0}, /* 20 MHz */
};
diff --git a/drivers/usb/phy/phy-samsung-usb2.c b/drivers/usb/phy/phy-samsung-usb2.c
index 1011c16..758b86d 100644
--- a/drivers/usb/phy/phy-samsung-usb2.c
+++ b/drivers/usb/phy/phy-samsung-usb2.c
@@ -388,7 +388,7 @@ static int samsung_usb2phy_probe(struct platform_device *pdev)
clk = devm_clk_get(dev, "otg");
if (IS_ERR(clk)) {
- dev_err(dev, "Failed to get otg clock\n");
+ dev_err(dev, "Failed to get usbhost/otg clock\n");
return PTR_ERR(clk);
}
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index ed4949f..805940c 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -855,10 +855,6 @@ static int usbhsg_gadget_stop(struct usb_gadget *gadget,
struct usbhsg_gpriv *gpriv = usbhsg_gadget_to_gpriv(gadget);
struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
- if (!driver ||
- !driver->unbind)
- return -EINVAL;
-
usbhsg_try_stop(priv, USBHSG_STATUS_REGISTERD);
gpriv->driver = NULL;
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index d6ef2f8..0eae4ba 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -53,6 +53,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+ { USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
{ USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */
@@ -118,6 +119,8 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+ { USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
+ { USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
@@ -148,6 +151,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 0a818b2..603fb70 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -905,20 +905,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
if (status < 0) {
dev_dbg(&port->dev, "Reading Spreg failed\n");
- return -1;
+ goto err;
}
Data |= 0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "writing Spreg failed\n");
- return -1;
+ goto err;
}
Data &= ~0x80;
status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "writing Spreg failed\n");
- return -1;
+ goto err;
}
/* End of block to be checked */
@@ -927,7 +927,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
&Data);
if (status < 0) {
dev_dbg(&port->dev, "Reading Controlreg failed\n");
- return -1;
+ goto err;
}
Data |= 0x08; /* Driver done bit */
Data |= 0x20; /* rx_disable */
@@ -935,7 +935,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
mos7840_port->ControlRegOffset, Data);
if (status < 0) {
dev_dbg(&port->dev, "writing Controlreg failed\n");
- return -1;
+ goto err;
}
/* do register settings here */
/* Set all regs to the device default values. */
@@ -946,21 +946,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "disabling interrupts failed\n");
- return -1;
+ goto err;
}
/* Set FIFO_CONTROL_REGISTER to the default value */
Data = 0x00;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
- return -1;
+ goto err;
}
Data = 0xcf;
status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
if (status < 0) {
dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
- return -1;
+ goto err;
}
Data = 0x03;
@@ -1103,6 +1103,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
/* mos7840_change_port_settings(mos7840_port,old_termios); */
return 0;
+err:
+ for (j = 0; j < NUM_URBS; ++j) {
+ urb = mos7840_port->write_urb_pool[j];
+ if (!urb)
+ continue;
+ kfree(urb->transfer_buffer);
+ usb_free_urb(urb);
+ }
+ return status;
}
/*****************************************************************************
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5dd857d..1cf6f12 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -341,17 +341,12 @@ static void option_instat_callback(struct urb *urb);
#define OLIVETTI_VENDOR_ID 0x0b3c
#define OLIVETTI_PRODUCT_OLICARD100 0xc000
#define OLIVETTI_PRODUCT_OLICARD145 0xc003
+#define OLIVETTI_PRODUCT_OLICARD200 0xc005
/* Celot products */
#define CELOT_VENDOR_ID 0x211f
#define CELOT_PRODUCT_CT680M 0x6801
-/* ONDA Communication vendor id */
-#define ONDA_VENDOR_ID 0x1ee8
-
-/* ONDA MT825UP HSDPA 14.2 modem */
-#define ONDA_MT825UP 0x000b
-
/* Samsung products */
#define SAMSUNG_VENDOR_ID 0x04e8
#define SAMSUNG_PRODUCT_GT_B3730 0x6889
@@ -444,7 +439,8 @@ static void option_instat_callback(struct urb *urb);
/* Hyundai Petatel Inc. products */
#define PETATEL_VENDOR_ID 0x1ff4
-#define PETATEL_PRODUCT_NP10T 0x600e
+#define PETATEL_PRODUCT_NP10T_600A 0x600a
+#define PETATEL_PRODUCT_NP10T_600E 0x600e
/* TP-LINK Incorporated products */
#define TPLINK_VENDOR_ID 0x2357
@@ -782,6 +778,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6008) },
@@ -817,7 +814,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
@@ -1256,8 +1254,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) },
+ { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200) },
{ USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_MT825UP) }, /* ONDA MT825UP modem */
{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) },
{ USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM610) },
@@ -1329,9 +1327,12 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM2, 0xff, 0x00, 0x00) },
{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
- { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T) },
+ { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600A) },
+ { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) },
{ USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
+ { USB_DEVICE(TPLINK_VENDOR_ID, 0x9000), /* TP-Link MA260 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x02, 0x01) }, /* D-Link DWM-156 (variant) */
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d01, 0xff, 0x00, 0x00) }, /* D-Link DWM-156 (variant) */
@@ -1339,6 +1340,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d02, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x7d03, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 7182bb7..375b5a4 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -371,7 +371,7 @@ static int ti_startup(struct usb_serial *serial)
usb_set_serial_data(serial, tdev);
/* determine device type */
- if (usb_match_id(serial->interface, ti_id_table_3410))
+ if (serial->type == &ti_1port_device)
tdev->td_is_3410 = 1;
dev_dbg(&dev->dev, "%s - device type is %s\n", __func__,
tdev->td_is_3410 ? "3410" : "5052");
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 179933528..c015f2c 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -665,6 +665,13 @@ UNUSUAL_DEV( 0x054c, 0x016a, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY ),
+/* Submitted by Ren Bigcren <bigcren.ren@sonymobile.com> */
+UNUSUAL_DEV( 0x054c, 0x02a5, 0x0100, 0x0100,
+ "Sony Corp.",
+ "MicroVault Flash Drive",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_READ_CAPACITY_16 ),
+
/* floppy reports multiple luns */
UNUSUAL_DEV( 0x055d, 0x2020, 0x0000, 0x0210,
"SAMSUNG",
diff --git a/include/linux/usb.h b/include/linux/usb.h
index a232b7e..0eec268 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -367,17 +367,6 @@ struct usb_bus {
/* ----------------------------------------------------------------------- */
-/* This is arbitrary.
- * From USB 2.0 spec Table 11-13, offset 7, a hub can
- * have up to 255 ports. The most yet reported is 10.
- *
- * Current Wireless USB host hardware (Intel i1480 for example) allows
- * up to 22 devices to connect. Upcoming hardware might raise that
- * limit. Because the arrays need to add a bit for hub status data, we
- * do 31, so plus one evens out to four bytes.
- */
-#define USB_MAXCHILDREN (31)
-
struct usb_tt;
enum usb_device_removable {
diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h
index 7692dc6..331499d 100644
--- a/include/uapi/linux/usb/ch11.h
+++ b/include/uapi/linux/usb/ch11.h
@@ -11,6 +11,17 @@
#include <linux/types.h> /* __u8 etc */
+/* This is arbitrary.
+ * From USB 2.0 spec Table 11-13, offset 7, a hub can
+ * have up to 255 ports. The most yet reported is 10.
+ *
+ * Current Wireless USB host hardware (Intel i1480 for example) allows
+ * up to 22 devices to connect. Upcoming hardware might raise that
+ * limit. Because the arrays need to add a bit for hub status data, we
+ * use 31, so plus one evens out to four bytes.
+ */
+#define USB_MAXCHILDREN 31
+
/*
* Hub request types
*/

Privacy Policy