aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/parisc/lba_pci.c
AgeCommit message (Collapse)AuthorFilesLines
2013-07-09parisc: fix LMMIO mismatch between PAT length and MASK registerHelge Deller1-0/+56
The LMMIO length reported by PAT and the length given by the LBA MASK register are not consistent. This leads e.g. to a not-working ATI FireGL card with the radeon DRM driver since the memory can't be mapped. Fix this by correctly adjusting the resource sizes. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 3.10
2013-06-01parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus ↵Helge Deller1-4/+4
resources (v2) commit dc7dce280a Author: Bjorn Helgaas <bhelgaas@google.com> Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2013-06-01parisc/PCI: Set type for LBA bus_num resourceBjorn Helgaas1-0/+1
The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da43 "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Helge Deller <deller@gmx.de>
2013-01-03Drivers: misc: remove __dev* attributes.Greg Kroah-Hartman1-1/+1
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-22parisc/PCI: Use list_for_each_entry() for bus->devices traversalBjorn Helgaas1-5/+2
Replace list_for_each() + pci_dev_b() with the simpler list_for_each_entry(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: linux-parisc@vger.kernel.org
2012-08-22parisc/PCI: Enable PERR/SERR on all devicesBjorn Helgaas1-1/+3
Previously, we enabled PERR & SERR for the first device on the bus, but left other devices alone. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> CC: linux-parisc@vger.kernel.org
2012-06-13parisc/PCI: register busn_res for root busesYinghai Lu1-2/+6
Add the host bridge bus number aperture to the resource list. Like the MMIO and I/O port apertures, this is used when assigning resources to hot-added devices or in the case of conflicts. [bhelgaas: changelog, set flags directly, at LBA bus_num init] CC: Kyle McMartin <kyle@mcmartin.ca> CC: Helge Deller <deller@gmx.de> CC: linux-parisc@vger.kernel.org Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-06-13PCI: replace struct pci_bus secondary/subordinate with busn_resYinghai Lu1-11/+11
Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-28Remove all #inclusions of asm/system.hDavid Howells1-1/+0
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-02-23parisc/PCI: get rid of device resource fixupsBjorn Helgaas1-25/+6
Tell the PCI core about host bridge address translation so it can take care of bus-to-resource conversion for us. CC: linux-parisc@vger.kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-01-06parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resourcesBjorn Helgaas1-12/+17
Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. CC: linux-parisc@vger.kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06parisc/PCI: lba: use pci_create_bus() instead of pci_scan_bus_parented()Bjorn Helgaas1-6/+8
No functional change here; just converting from pci_scan_bus_parented() to pci_create_bus() to make a future patch simpler. CC: linux-parisc@vger.kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2012-01-06parisc/PCI: lba: deal with LMMIO/PAT overlaps before creating PCI root busBjorn Helgaas1-17/+18
This moves the truncate_pat_collision() call out of the pcibios_fixup_bus() path so that when a future patch builds a list of root bus resources for pci_create_bus(), it can use the truncated LMMIO range. truncate_pat_collision() used to be called in this path: pci_scan_bus_parented pci_create_bus pci_scan_child_bus pcibios_fixup_bus lba_fixup_bus truncate_pat_collision All of the PAT and lba_dev resource setup must be done before we call pci_scan_bus_parented(), so it should be safe to move the truncate_pat_collision() to just before pci_scan_bus_parented(). CC: linux-parisc@vger.kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-02parisc: fixed faulty check in lba_pciStoyan Gaydarov1-1/+1
This patche fixes a spelling error that has resulted from copy and pasting. The location of the error was found using a semantic patch but the semantic patch was not trying to find these errors. After looking things over it seemed logical that this change was needed. Signed-off-by: Stoyan Gaydarov <sgayda2@uiuc.edu> Signed-off-by: Helge Deller <deller@gmx.de>
2009-07-03parisc: Fix gcc 4.4 warning in lba_pci.cGrant Grundler1-9/+22
gcc 4.4 warns about: drivers/parisc/lba_pci.c: In function 'lba_pat_resources': drivers/parisc/lba_pci.c:1099: warning: the frame size of 8280 bytes is larger than 4096 bytes The problem is we declare two large structures on the stack. They don't need to be on the stack since they are only used during LBA initialization (which is serialized). Moving to be "static". Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-07-03parisc: advertise PCI devs after "assign_resources"Grant Grundler1-5/+5
Alex Chiang asked me why PARISC was calling pci_bus_add_devices() and pci_bus_assign_resources() in the opposite order from everyone else. No reason and I couldn't see any data dependency. Patch below applies cleanly to 2.6.30-rc2. Later, I suspected the code worked only because no drivers would be loaded/ready until much later in the system initialization sequence. Tested "LBA" code on J6000 (32-bit) and A500 (64-bit SMP) with 2.6.30-rc2. Not tested with any Dino controllers. Not tested with PCI-PCI Bridge (TBD). Reported-by: Alex Chiang <achiang@hp.com> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-03-13parisc: fix wrong assumption about bus->selfGrant Grundler1-2/+2
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> posted a patch series to linux-pci to fix a wrong assumption about pci_bus->self==NULL for all PCI host bus controllers. While PARISC platforms to not behave this way, I prefer to have the code consistent across architectures. The following patch replaces pci_bus->self with pci_bus->parent when used as a test to check for "root bus controller". Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-01-05parisc: drivers/parisc/: make code staticAdrian Bunk1-1/+1
Make the following needlessly global code static: - asp.c: asp_init_chip() - ccio-dma.c: ccio_io_pdir_entry() - dino.c: struct dino_port_ops - dino.c: struct dino_bios_ops - hppb.c: struct hppb_card_head - lasi.c: lasi_led_init() - lasi.c: lasi_init_chip() - lba_pci.c: struct lba_bios_ops - sba_iommu.c: sba_io_pdir_entry() - sba_iommu.c: sba_driver_callback() - sba_iommu.c: sba_driver_callback() - wax.c: wax_init_chip() Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2008-05-15drivers/parisc: replace remaining __FUNCTION__ occurrencesHarvey Harrison1-11/+11
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2007-12-06[PARISC] lba_pci: pci_claim_resources disabled expansion romsKyle McMartin1-3/+7
radeonfb was HPMC-ing my C8000 by trying to map its expansion rom from IO_VIEW, instead of PA_VIEW. Fix seems to be to ensure that its disabled ROM is properly inserted into the resource tree. FIXME: this will result in a whinging printk for cards which share expansion ROMS, such as a quad tulip. Thankfully, it isn't harmful. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2007-10-18[PARISC] Fix infinite loop in /proc/iomemMatthew Wilcox1-44/+7
pcibios_link_hba_resources() could corrupt the resource tree by inserting resources in the wrong place. Fix this by calling pci_claim_resource() for PCI-PCI bridges. Delete pcibios_link_hba_resources as we shouldn't need it any more. Also get rid of lba_claim_dev_resources() and just call pci_claim_resource() directly. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap1-1/+0
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-17[PARISC] lba_pci format warningsMatthew Wilcox1-27/+29
Fix resource_size_t warnings in a variety of ways Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-08[PARISC] Fix PCI bus numbering in the presence of Cardbus bridgesMatthew Wilcox1-13/+19
Firmware ignores Cardbus bridges, so when Linux assigns bus numbers, it must override firmware's notion of what the busses are numbered. This is not sufficient to support the Cardbus bridge as there is also no interrupt routing table entry for them. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-12-08[PARISC] sparse fixesMatthew Wilcox1-1/+1
0/NULL, missing __user, missing __iomem, non-ANSI prototype. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04[PARISC] Move LBA and SBA register defines to the common ropes.hKyle McMartin1-65/+0
header. This will allow the use of more constants in the agpgart driver. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04[PARISC] Create shared <asm/ropes.h> headerKyle McMartin1-39/+1
Pull out struct sba_device and struct lba_device into a common ropes.h header. Also fold the parisc portion of iosapic.h into this file. (Then delete the useless portion of iosapic.h) Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04[PARISC] Stash the lba_device in its struct device drvdataKyle McMartin1-0/+1
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-10-04[PARISC] Pretty print the name of the lba type on kernel bootKyle McMartin1-6/+10
(it's pretty useless telling a user they have a whole bunch of TR%d.%d LBAs) Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-03-30[PARISC] I/O-Space must be ioremap_nocache()'dHelge Deller1-4/+4
Addresses in F-space must be accessed uncached on most parisc machines. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-22[PARISC] Use kzalloc and other janitor-style cleanupsHelge Deller1-4/+2
Helge, o Convert a bunch of kmalloc/memset uses to kzalloc. o pci.c: Add some __read_mostly annotations. o pci.c: Move constant pci_post_reset_delay to asm/pci.h o grfioctl.h: Add A4450A to comment of CRT_ID_VISUALIZE_EG. o Add some consts to perf.c/perf_images.h Matthew, o sticore.c: Add some consts to suppress compile warnings. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10[PARISC] Truncate overlapping PAT PDC reported rangesGrant Grundler1-23/+90
Deal with overlapping LBA MMIO resources, rp3440 PDC BUG: PDC reports lmmio range for the last rope that overlaps with the CPU HPA. Console output was: ... Found devices: 1. Storm Peak Fast at 0xfffffffffe798000 [152] { 0, 0x0, 0x889, 0x00004 } 2. Storm Peak Fast at 0xfffffffffe799000 [153] { 0, 0x0, 0x889, 0x00004 } ... FAILED: lba_fixup_bus() request for lmmio_space [fffffffff0000000/fffffffffecffffe] Output is now: LBA: Truncating lmmio_space [fffffffff0000000/fffffffffecffffe] to [fffffffff0000000,fffffffffe797fff] My only concern with this patch is how C8000 (PAT PDC) will report elmmio ranges when a gfx card is installed. I'll have to test this another day. Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: James Bottomley <jejb@parisc-linux.org> Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2006-01-10[PARISC] Add __read_mostly section for pariscHelge Deller1-1/+1
Flag a whole bunch of things as __read_mostly on parisc. Also flag a few branches as unlikely() and cleanup a bit of code. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-10-21[PARISC] Convert parisc_device to use struct resource for hpaMatthew Wilcox1-7/+7
Convert pa_dev->hpa from an unsigned long to a struct resource. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Fix up users of ->hpa to use ->hpa.start instead. Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
2005-06-27[PATCH] acpi bridge hotadd: ACPI based root bridge hot-addRajesh Shah1-0/+2
When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and devices attached to it that have not been configured by firmware. In this case, we need to configure the devices before starting them. This patch separates device start from device scan so that we can introduce the configuration step in the middle. I kept the existing semantics for pci_scan_bus() since there are a huge number of callers to that function. Also, I have no way of testing the changes I made to the parisc files, so this needs review by those folks. Sorry for the massive cross-post, this touches files in many different places. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+1649
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!

Privacy Policy