aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/musb/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2013-05-28usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modesDaniel Mack1-2/+2
This makes building the actual object files optional to the selected mode, which saves users who know which kind of USB mode support they need some binary size. Unimplemented functions are stubbed out with static inline functions. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-05-04usb: musb: Add support for ti81xx platformAjay Kumar Gupta1-0/+1
TI81XX platform has two musb interfaces and uses CPPI4.1 DMA engine. It has builtin USB PHYs as AM35x. The current set of patches adds support for one instance and only in PIO mode. [ balbi@ti.com : make it compile and solve a "may be used uninitialized" warning ] Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12usb: musb: use a Kconfig choice to pick the right DMA methodArnd Bergmann1-22/+4
The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-07-01usb: musb: drop a gigantic amount of ifdeferryFelipe Balbi1-2/+2
the MUSB IP is always OTG, so there's no point in adding so many ifdefs on the code. Drop those and always compile the driver for OTG support. This also allows us to drop the useless "driver mode" choice. For doing that, we need to make musb depend on both Host and Peripheral side. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-18usb: musb: ux500: add configuration and build options for ux500 dmaMian Yousaf Kaukab1-0/+5
Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-13usb: musb: drop unneeded musb_debug trickeryFelipe Balbi1-2/+0
We have a generic way of enabling/disabling different debug messages on a driver called DYNAMIC_PRINTK. Anyone interested in enabling just part of the debug messages, please read the documentation under: Documentation/dynamic-debug-howto.txt for information on how to use that great infrastructure. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: add support for ux500 platformMian Yousaf Kaukab1-0/+1
Initial support for u8500 and u5500 platform. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: split blackfin to its own platform_driverFelipe Balbi1-3/+1
Just adding its own platform_driver, not really using it yet. Later patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: split da8xx to its own platform_driverFelipe Balbi1-1/+1
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: split davinci to its own platform_driverFelipe Balbi1-1/+1
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: split tusb6010 to its own platform_driverFelipe Balbi1-1/+1
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: split am35x to its own platform_driverFelipe Balbi1-1/+1
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: split omap2430 to its own platform_driverFelipe Balbi1-1/+2
Just adding its own platform_driver, not really using it yet. When all HW glue layers are converted, more patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-10usb: musb: add Kconfig options for each glue layerFelipe Balbi1-12/+9
This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-10-22USB: musb: add musb support for AM35xAjay Kumar Gupta1-1/+5
AM35x has musb interface and uses CPPI4.1 DMA engine. Current patch supports only PIO mode. DMA support can be added later once basic CPPI4.1 DMA patch is accepted. Also added USB_MUSB_AM35X which is required to differentiate musb ips between OMAP3x and AM35x. This config would be used to for below purposes, - Select am35x.c instead of omap2430.c for compilation at drivers/usb/musb directory. Please note there are significant differneces in these two files as musb ip in quite different on AM35x. Please note that in multi omap configuration only omap2430.c file will get compiled and we would require to select only AM35x based board config to compile am35x.c - Select workaround codes applicable for AM35x musb issues. one such workaround is for bytewise read issue on AM35x. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: makefile cleanupmatt mooney1-54/+17
For all modules, change <module>-objs to <module>-y; remove if-statements and replace with lists using the kbuild idiom; move flags to the top of the file; and fix alignment while trying to maintain the original scheme in each file. None of the dependencies are modified. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: change to new flag variablematt mooney1-3/+1
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-22usb: musb: introduce DA8xx/OMAP-L1x glue layerSergei Shtylyov1-0/+4
Texas Instruments DA8xx/OMAP-L1x glue layer for the MUSBMHRDC driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Yadviga Grigorieva <yadviga@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: musb: Makefile: remove unexistent config optionFelipe Balbi1-6/+0
Remove the unexistent CONFIG_USB_INVENTRA_MUSB_HAS_AHB_ID option from our Makefile. Problem reported by Sergei Shtylyov <sshtylyov@mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20usb: musb: add debugfs supportFelipe Balbi1-0/+4
for now only a simple register dump entry (which can be rather useful on debugging) and a way to start test modes. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20USB: MUSB: Build MUSB driver for OMAP4Maulik Mankad1-0/+4
This patch updates the Makefile to build the MUSB driver for OMAP4. It also sets the Kconfig options for OMAP4. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30MUSB: fix DaVinci glue layer dependencySergei Shtylyov1-1/+1
CONFIG_ARCH_DAVINCI now embraces both the "real" DaVinci and DA8xx/OMAP-L1x -- on which the DaVinci glue layer won't work. Change the Makefile dependency to CONFIG_ARCH_DAVINCI_DMx which corresponds to "real" DaVinci. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-07USB: musb: add Blackfin Kconfig options and MakefileBryan Wu1-0/+8
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21usb: musb: get rid of MUSB_LOGLEVEL and use parameterFelipe Balbi1-14/+2
We can change debugging level on the fly via /sys/module/musb_hdrc/parameters/debug. We can also get rid of the LOGLEVEL facility in Kconfig and rely only in module parameter. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-21usb: musb: get rid of procfs entryFelipe Balbi1-5/+0
Drivers should not add procfs. The functionality in the old procfs file will be moved to debugfs. Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-08-13USB: Add MUSB and TUSB supportFelipe Balbi1-0/+86
This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Privacy Policy