aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorOlli Salonen <olli.salonen@iki.fi>2014-08-11 19:58:15 (GMT)
committerMauro Carvalho Chehab <mchehab@osg.samsung.com>2014-09-24 00:33:16 (GMT)
commit294422662215188ace50ae14318ac025a56843d8 (patch)
tree34deeb68e4de967aa6c8dd7b4f37a5aa3381cff9
parent5cd3b6b40d3a08394a9e973c597a284153eac0b5 (diff)
[media] cx23855: add support for DVBSky T9580 DVB-C/T2/S2 tuner
DVBSky T9580 is a dual tuner card with one DVB-T2/C tuner and one DVB-S2 tuner. It contains the following components: - PCIe bridge: Conexant CX23885 - Demod for terrestrial/cable: Silicon Labs Si2168-A30 - Tuner for terrestrial/cable: Silicon Labs Si2158-A20 - Demod for sat: Montage DS3103 - Tuner for sat: Montage TS2022 This patch depends on Max Nibble's patch for m88ds3103 (see patchwork 25312: https://patchwork.linuxtv.org/patch/25312/ ). 3 firmwares are needed: - Si2168-A30 demod and Si2158-A20 tuner: same as TechnoTrend CT2-4400, https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html - Montage DS3103 demod: same as PCTV 461e, Antti has it on his LinuxTV project page: http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/ IR receiver is not supported. Values in cx23885_gpio_setup, cx23885_card_setup and dvbsky_t9580_set_voltage as well as the EEPROM read function are taken from the manufacturer provided semi-open source driver. The drivers in question are Linux GPL'd media tree drivers for cx23885 modified by Max Nibble (nibble.max@gmail.com) with proprietary tuner/demod drivers. Max is aware of this patch and has approved my use of the values in this patch. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-rw-r--r--drivers/media/pci/cx23885/Kconfig4
-rw-r--r--drivers/media/pci/cx23885/cx23885-cards.c26
-rw-r--r--drivers/media/pci/cx23885/cx23885-dvb.c160
-rw-r--r--drivers/media/pci/cx23885/cx23885.h1
4 files changed, 191 insertions, 0 deletions
diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig
index a883ea4..f613314 100644
--- a/drivers/media/pci/cx23885/Kconfig
+++ b/drivers/media/pci/cx23885/Kconfig
@@ -31,12 +31,16 @@ config VIDEO_CX23885
select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
select DVB_SI2165 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
+ select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
+ select MEDIA_TUNER_M88TS2022 if MEDIA_SUBDRV_AUTOSELECT
select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
---help---
This is a video4linux driver for Conexant 23885 based
diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c
index 21e500b..88c257d 100644
--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -675,6 +675,11 @@ struct cx23885_board cx23885_boards[] = {
.amux = CX25840_AUDIO7,
} },
},
+ [CX23885_BOARD_DVBSKY_T9580] = {
+ .name = "DVBSky T9580",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -930,6 +935,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x18ac,
.subdevice = 0xdb98,
.card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2,
+ }, {
+ .subvendor = 0x4254,
+ .subdevice = 0x9580,
+ .card = CX23885_BOARD_DVBSKY_T9580,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -1524,6 +1533,14 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
cx_set(GP0_IO, 0x00040004);
mdelay(60);
break;
+ case CX23885_BOARD_DVBSKY_T9580:
+ /* enable GPIO3-18 pins */
+ cx_write(MC417_CTL, 0x00000037);
+ cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1);
+ cx23885_gpio_clear(dev, GPIO_2 | GPIO_11);
+ mdelay(100);
+ cx23885_gpio_set(dev, GPIO_2 | GPIO_11);
+ break;
}
}
@@ -1847,6 +1864,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_DVBSKY_T9580:
+ ts1->gen_ctrl_val = 0x5; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0x8; /* Serial bus */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
@@ -1909,6 +1934,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_AVERMEDIA_HC81R:
case CX23885_BOARD_TBS_6980:
case CX23885_BOARD_TBS_6981:
+ case CX23885_BOARD_DVBSKY_T9580:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c
index 3e72c95..13734b8 100644
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -69,6 +69,10 @@
#include "a8293.h"
#include "mb86a20s.h"
#include "si2165.h"
+#include "si2168.h"
+#include "si2157.h"
+#include "m88ds3103.h"
+#include "m88ts2022.h"
static unsigned int debug;
@@ -583,6 +587,35 @@ static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
return 0;
}
+static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_13:
+ cx23885_gpio_set(dev, GPIO_1);
+ cx23885_gpio_clear(dev, GPIO_0);
+ break;
+ case SEC_VOLTAGE_18:
+ cx23885_gpio_set(dev, GPIO_1);
+ cx23885_gpio_set(dev, GPIO_0);
+ break;
+ case SEC_VOLTAGE_OFF:
+ cx23885_gpio_clear(dev, GPIO_1);
+ cx23885_gpio_clear(dev, GPIO_0);
+ break;
+ }
+
+ /* call the frontend set_voltage function */
+ port->fe_set_voltage(fe, voltage);
+
+ return 0;
+}
+
static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
@@ -747,6 +780,19 @@ static const struct si2165_config hauppauge_hvr4400_si2165_config = {
.ref_freq_Hz = 16000000,
};
+static const struct m88ds3103_config dvbsky_t9580_m88ds3103_config = {
+ .i2c_addr = 0x68,
+ .clock = 27000000,
+ .i2c_wr_max = 33,
+ .clock_out = 0,
+ .ts_mode = M88DS3103_TS_PARALLEL,
+ .ts_clk = 16000,
+ .ts_clk_pol = 1,
+ .lnb_en_pol = 1,
+ .lnb_hv_pol = 0,
+ .agc = 0x99,
+};
+
static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
{
struct cx23885_dev *dev = (struct cx23885_dev *)device;
@@ -896,6 +942,13 @@ static int dvb_register(struct cx23885_tsport *port)
struct cx23885_dev *dev = port->dev;
struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
struct vb2_dvb_frontend *fe0, *fe1 = NULL;
+ struct si2168_config si2168_config;
+ struct si2157_config si2157_config;
+ struct m88ts2022_config m88ts2022_config;
+ struct i2c_board_info info;
+ struct i2c_adapter *adapter;
+ struct i2c_client *client_demod;
+ struct i2c_client *client_tuner;
int mfe_shared = 0; /* bus not shared by default */
int ret;
@@ -1533,6 +1586,97 @@ static int dvb_register(struct cx23885_tsport *port)
break;
}
break;
+ case CX23885_BOARD_DVBSKY_T9580:
+ i2c_bus = &dev->i2c_bus[0];
+ i2c_bus2 = &dev->i2c_bus[1];
+ switch (port->nr) {
+ /* port b - satellite */
+ case 1:
+ /* attach frontend */
+ fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
+ &dvbsky_t9580_m88ds3103_config,
+ &i2c_bus2->i2c_adap, &adapter);
+ if (fe0->dvb.frontend == NULL)
+ break;
+
+ /* attach tuner */
+ m88ts2022_config.fe = fe0->dvb.frontend;
+ m88ts2022_config.clock = 27000000;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &m88ts2022_config;
+ request_module(info.type);
+ client_tuner = i2c_new_device(adapter, &info);
+ if (client_tuner == NULL ||
+ client_tuner->dev.driver == NULL)
+ goto frontend_detach;
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ goto frontend_detach;
+ }
+
+ /* delegate signal strength measurement to tuner */
+ fe0->dvb.frontend->ops.read_signal_strength =
+ fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
+
+ /*
+ * for setting the voltage we need to set GPIOs on
+ * the card.
+ */
+ port->fe_set_voltage =
+ fe0->dvb.frontend->ops.set_voltage;
+ fe0->dvb.frontend->ops.set_voltage =
+ dvbsky_t9580_set_voltage;
+
+ port->i2c_client_tuner = client_tuner;
+
+ break;
+ /* port c - terrestrial/cable */
+ case 2:
+ /* attach frontend */
+ si2168_config.i2c_adapter = &adapter;
+ si2168_config.fe = &fe0->dvb.frontend;
+ si2168_config.ts_mode = SI2168_TS_SERIAL;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2168", I2C_NAME_SIZE);
+ info.addr = 0x64;
+ info.platform_data = &si2168_config;
+ request_module(info.type);
+ client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
+ if (client_demod == NULL ||
+ client_demod->dev.driver == NULL)
+ goto frontend_detach;
+ if (!try_module_get(client_demod->dev.driver->owner)) {
+ i2c_unregister_device(client_demod);
+ goto frontend_detach;
+ }
+ port->i2c_client_demod = client_demod;
+
+ /* attach tuner */
+ si2157_config.fe = fe0->dvb.frontend;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "si2157", I2C_NAME_SIZE);
+ info.addr = 0x60;
+ info.platform_data = &si2157_config;
+ request_module(info.type);
+ client_tuner = i2c_new_device(adapter, &info);
+ if (client_tuner == NULL ||
+ client_tuner->dev.driver == NULL) {
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ goto frontend_detach;
+ }
+ if (!try_module_get(client_tuner->dev.driver->owner)) {
+ i2c_unregister_device(client_tuner);
+ module_put(client_demod->dev.driver->owner);
+ i2c_unregister_device(client_demod);
+ goto frontend_detach;
+ }
+ port->i2c_client_tuner = client_tuner;
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
@@ -1607,6 +1751,22 @@ static int dvb_register(struct cx23885_tsport *port)
memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
break;
}
+ case CX23885_BOARD_DVBSKY_T9580: {
+ u8 eeprom[256]; /* 24C02 i2c eeprom */
+
+ if (port->nr > 2)
+ break;
+
+ /* Read entire EEPROM */
+ dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
+ tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
+ sizeof(eeprom));
+ printk(KERN_INFO "DVBSky T9580 port %d MAC address: %pM\n",
+ port->nr, eeprom + 0xc0 + (port->nr-1) * 8);
+ memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 +
+ (port->nr-1) * 8, 6);
+ break;
+ }
}
return ret;
diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h
index 0d58882..6c35e61 100644
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -92,6 +92,7 @@
#define CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200 42
#define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE 43
#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2 44
+#define CX23885_BOARD_DVBSKY_T9580 45
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002

Privacy Policy