aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMauro Carvalho Chehab <mchehab@redhat.com>2013-01-14 20:34:55 -0300
committerMauro Carvalho Chehab <mchehab@redhat.com>2013-01-23 19:10:42 -0200
commitd01a8ee37afdeb1a00458a79854a1672ada5c9f0 (patch)
tree476821589900c9b83706defb07d986588a7983a9
parent149d518ad0fd0d566d4859a4d3f280ee33de8ed7 (diff)
[media] mb86a20s: improve bit error count for BER
Do a better job on setting the bit error counters, in order to have all layer measures to happen in a little less than one second. Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
-rw-r--r--drivers/media/dvb-frontends/mb86a20s.c160
1 files changed, 157 insertions, 3 deletions
diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c
index 354ea664b713..c68e4676e5fd 100644
--- a/drivers/media/dvb-frontends/mb86a20s.c
+++ b/drivers/media/dvb-frontends/mb86a20s.c
@@ -31,6 +31,8 @@ struct mb86a20s_state {
struct dvb_frontend frontend;
+ u32 estimated_rate[3];
+
bool need_init;
};
@@ -39,6 +41,8 @@ struct regdata {
u8 data;
};
+#define BER_SAMPLING_RATE 1 /* Seconds */
+
/*
* Initialization sequence: Use whatevere default values that PV SBTVD
* does on its initialisation, obtained via USB snoop
@@ -87,7 +91,7 @@ static struct regdata mb86a20s_init[] = {
* it collects the bit error count. The bit counters are initialized
* to 65535 here. This warrants that all of them will be quickly
* calculated when device gets locked. As TMCC is parsed, the values
- * can be adjusted later in the driver's code.
+ * will be adjusted later in the driver's code.
*/
{ 0x52, 0x01 }, /* Turn on BER before Viterbi */
{ 0x50, 0xa7 }, { 0x51, 0x00 },
@@ -485,6 +489,113 @@ static void mb86a20s_reset_frontend_cache(struct dvb_frontend *fe)
c->isdbt_sb_segment_count = 0;
}
+/*
+ * Estimates the bit rate using the per-segment bit rate given by
+ * ABNT/NBR 15601 spec (table 4).
+ */
+static u32 isdbt_rate[3][5][4] = {
+ { /* DQPSK/QPSK */
+ { 280850, 312060, 330420, 340430 }, /* 1/2 */
+ { 374470, 416080, 440560, 453910 }, /* 2/3 */
+ { 421280, 468090, 495630, 510650 }, /* 3/4 */
+ { 468090, 520100, 550700, 567390 }, /* 5/6 */
+ { 491500, 546110, 578230, 595760 }, /* 7/8 */
+ }, { /* QAM16 */
+ { 561710, 624130, 660840, 680870 }, /* 1/2 */
+ { 748950, 832170, 881120, 907820 }, /* 2/3 */
+ { 842570, 936190, 991260, 1021300 }, /* 3/4 */
+ { 936190, 1040210, 1101400, 1134780 }, /* 5/6 */
+ { 983000, 1092220, 1156470, 1191520 }, /* 7/8 */
+ }, { /* QAM64 */
+ { 842570, 936190, 991260, 1021300 }, /* 1/2 */
+ { 1123430, 1248260, 1321680, 1361740 }, /* 2/3 */
+ { 1263860, 1404290, 1486900, 1531950 }, /* 3/4 */
+ { 1404290, 1560320, 1652110, 1702170 }, /* 5/6 */
+ { 1474500, 1638340, 1734710, 1787280 }, /* 7/8 */
+ }
+};
+
+static void mb86a20s_layer_bitrate(struct dvb_frontend *fe, u32 layer,
+ u32 modulation, u32 fec, u32 interleaving,
+ u32 segment)
+{
+ struct mb86a20s_state *state = fe->demodulator_priv;
+ u32 rate;
+ int m, f, i;
+
+ /*
+ * If modulation/fec/interleaving is not detected, the default is
+ * to consider the lowest bit rate, to avoid taking too long time
+ * to get BER.
+ */
+ switch (modulation) {
+ case DQPSK:
+ case QPSK:
+ default:
+ m = 0;
+ break;
+ case QAM_16:
+ m = 1;
+ break;
+ case QAM_64:
+ m = 2;
+ break;
+ }
+
+ switch (fec) {
+ default:
+ case FEC_1_2:
+ case FEC_AUTO:
+ f = 0;
+ break;
+ case FEC_2_3:
+ f = 1;
+ break;
+ case FEC_3_4:
+ f = 2;
+ break;
+ case FEC_5_6:
+ f = 3;
+ break;
+ case FEC_7_8:
+ f = 4;
+ break;
+ }
+
+ switch (interleaving) {
+ default:
+ case GUARD_INTERVAL_1_4:
+ i = 0;
+ break;
+ case GUARD_INTERVAL_1_8:
+ i = 1;
+ break;
+ case GUARD_INTERVAL_1_16:
+ i = 2;
+ break;
+ case GUARD_INTERVAL_1_32:
+ i = 3;
+ break;
+ }
+
+ /* Samples BER at BER_SAMPLING_RATE seconds */
+ rate = isdbt_rate[m][f][i] * segment * BER_SAMPLING_RATE;
+
+ /* Avoids sampling too quickly or to overflow the register */
+ if (rate < 256)
+ rate = 256;
+ else if (rate > (1 << 24) - 1)
+ rate = (1 << 24) - 1;
+
+ dev_dbg(&state->i2c->dev,
+ "%s: layer %c bitrate: %d kbps; counter = %d (0x%06x)\n",
+ __func__, 'A' + layer, segment * isdbt_rate[m][f][i]/1000,
+ rate, rate);
+
+ state->estimated_rate[i] = rate;
+}
+
+
static int mb86a20s_get_frontend(struct dvb_frontend *fe)
{
struct mb86a20s_state *state = fe->demodulator_priv;
@@ -514,10 +625,11 @@ static int mb86a20s_get_frontend(struct dvb_frontend *fe)
rc = mb86a20s_get_segment_count(state, i);
if (rc < 0)
goto noperlayer_error;
- if (rc >= 0 && rc < 14)
+ if (rc >= 0 && rc < 14) {
c->layer[i].segment_count = rc;
- else {
+ } else {
c->layer[i].segment_count = 0;
+ state->estimated_rate[i] = 0;
continue;
}
c->isdbt_layer_enabled |= 1 << i;
@@ -539,6 +651,10 @@ static int mb86a20s_get_frontend(struct dvb_frontend *fe)
dev_dbg(&state->i2c->dev, "%s: interleaving %d.\n",
__func__, rc);
c->layer[i].interleaving = rc;
+ mb86a20s_layer_bitrate(fe, i, c->layer[i].modulation,
+ c->layer[i].fec,
+ c->layer[i].interleaving,
+ c->layer[i].segment_count);
}
rc = mb86a20s_writereg(state, 0x6d, 0x84);
@@ -730,6 +846,42 @@ static int mb86a20s_get_ber_before_vterbi(struct dvb_frontend *fe,
__func__, 'A' + layer, *count);
+ /*
+ * As we get TMCC data from the frontend, we can better estimate the
+ * BER bit counters, in order to do the BER measure during a longer
+ * time. Use those data, if available, to update the bit count
+ * measure.
+ */
+
+ if (state->estimated_rate[layer]
+ && state->estimated_rate[layer] != *count) {
+ dev_dbg(&state->i2c->dev,
+ "%s: updating layer %c counter to %d.\n",
+ __func__, 'A' + layer, state->estimated_rate[layer]);
+ rc = mb86a20s_writereg(state, 0x50, 0xa7 + layer * 3);
+ if (rc < 0)
+ return rc;
+ rc = mb86a20s_writereg(state, 0x51,
+ state->estimated_rate[layer] >> 16);
+ if (rc < 0)
+ return rc;
+ rc = mb86a20s_writereg(state, 0x50, 0xa8 + layer * 3);
+ if (rc < 0)
+ return rc;
+ rc = mb86a20s_writereg(state, 0x51,
+ state->estimated_rate[layer] >> 8);
+ if (rc < 0)
+ return rc;
+ rc = mb86a20s_writereg(state, 0x50, 0xa9 + layer * 3);
+ if (rc < 0)
+ return rc;
+ rc = mb86a20s_writereg(state, 0x51,
+ state->estimated_rate[layer]);
+ if (rc < 0)
+ return rc;
+ }
+
+
/* Reset counter to collect new data */
rc = mb86a20s_writereg(state, 0x53, 0x07 & ~(1 << layer));
if (rc < 0)
@@ -922,8 +1074,10 @@ static int mb86a20s_set_frontend(struct dvb_frontend *fe)
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
+
rc = mb86a20s_writeregdata(state, mb86a20s_reset_reception);
mb86a20s_reset_counters(fe);
+
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 1);

Privacy Policy