aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/clock
diff options
context:
space:
mode:
authorJavier Martinez Canillas <javier.martinez@collabora.co.uk>2014-08-18 10:33:02 +0200
committerMike Turquette <mturquette@linaro.org>2014-09-09 13:55:53 -0700
commitfcd0864cdba2a93f5c51fdf06935151663f0954a (patch)
treea835da2a1481b409f8a83bf6d389ddeaf1554822 /Documentation/devicetree/bindings/clock
parent1887d69308f94eec12d581b4dbab67c28274039d (diff)
clk: max77686: Improve Maxim 77686 PMIC clocks binding
Like most clock drivers, the Maxim 77686 PMIC clock binding follows the convention that the "#clock-cells" property is used to specify the number of cells in a clock provider. But the binding document is not clear enough that it shall be set to 1 since the PMIC support multiple clocks outputs. Also, explain that the clocks identifiers are defined in a header file that can be included by Device Tree source with client nodes to avoid using magic numbers. Finally, add "clock-output-names" as an optional property since now is supported by the clock driver. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
-rw-r--r--Documentation/devicetree/bindings/clock/maxim,max77686.txt16
1 files changed, 12 insertions, 4 deletions
diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
index 96ce71bbd745..9c40739a661a 100644
--- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt
+++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
@@ -9,13 +9,21 @@ The MAX77686 contains three 32.768khz clock outputs that can be controlled
Following properties should be presend in main device node of the MFD chip.
Required properties:
-- #clock-cells: simple one-cell clock specifier format is used, where the
- only cell is used as an index of the clock inside the provider. Following
- indices are allowed:
+
+- #clock-cells: from common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
- 0: 32khz_ap clock,
- 1: 32khz_cp clock,
- 2: 32khz_pmic clock.
+Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max77686.h
+header and can be used in device tree sources.
+
Example: Node of the MFD chip
max77686: max77686@09 {
@@ -34,5 +42,5 @@ Example: Clock consumer node
compatible = "bar,foo";
/* ... */
clock-names = "my-clock";
- clocks = <&max77686 2>;
+ clocks = <&max77686 MAX77686_CLK_PMIC>;
};

Privacy Policy