aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net
diff options
context:
space:
mode:
authorThomas Petazzoni <thomas.petazzoni@free-electrons.com>2014-04-15 13:50:19 (GMT)
committerDavid S. Miller <davem@davemloft.net>2014-04-16 18:36:12 (GMT)
commitb9d12085f2f531fdea67f0361564e0812696227c (patch)
treea2181a720f57658e4db0789f24ec1140e2e7f228 /Documentation/devicetree/bindings/net
parente283546c0465dd3026bc94f7b1a9de7f6b8969ec (diff)
net: phy: add minimal support for QSGMII PHY
This commit adds the necessary definitions for the PHY layer to recognize "qsgmii" as a valid PHY interface. A QSMII interface, as defined at http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface, is "is a method of combining four SGMII lines into a 5Gbit/s interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX data and a single LVDS clock signal. QSGMII uses significantly fewer signal lines than four SGMII busses." This type of MAC <-> PHY connection might require special handling on the MAC driver side, so it should be possible to express this type of MAC <-> PHY connection, for example in the Device Tree. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: devicetree@vger.kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/devicetree/bindings/net')
-rw-r--r--Documentation/devicetree/bindings/net/ethernet.txt2
1 files changed, 1 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index 9ecd43d..3fc3605 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -10,7 +10,7 @@ The following properties are common to the Ethernet controllers:
- max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
the maximum frame size (there's contradiction in ePAPR).
- phy-mode: string, operation mode of the PHY interface; supported values are
- "mii", "gmii", "sgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
+ "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
"rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto
standard property;
- phy-connection-type: the same as "phy-mode" property but described in ePAPR;

Privacy Policy