path: root/Documentation/devicetree/bindings/pwm
diff options
authorTony Prisk <linux@prisktech.co.nz>2013-01-03 08:44:16 +1300
committerThierry Reding <thierry.reding@avionic-design.de>2013-01-09 08:17:12 +0100
commit3ccb1c1702ed4bb07006d20c8173899a69dae242 (patch)
treeef55173274b60bec942b0dcfc15f1df3614029fe /Documentation/devicetree/bindings/pwm
parent8ab432caa46413c9f3ca81d82ea9fa5bae07c3c1 (diff)
pwm: vt8500: Add polarity support
Add support to set polarity on PWM devices, allowing for inverted duty cycles. Also update the binding document to #pwm-cells = <3> to allow passing the flags from devicetree. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Diffstat (limited to 'Documentation/devicetree/bindings/pwm')
1 files changed, 6 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
index bcc63678a9a5..d21d82d29855 100644
--- a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -3,14 +3,17 @@ VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
Required properties:
- compatible: should be "via,vt8500-pwm"
- reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2. The first cell specifies the per-chip index
- of the PWM to use and the second cell is the period in nanoseconds.
+- #pwm-cells: Should be 3. Number of cells being used to specify PWM property.
+ First cell specifies the per-chip index of the PWM to use, the second
+ cell is the period in nanoseconds and bit 0 in the third cell is used to
+ encode the polarity of PWM output. Set bit 0 of the third in PWM specifier
+ to 1 for inverse polarity & set to 0 for normal polarity.
- clocks: phandle to the PWM source clock
pwm1: pwm@d8220000 {
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
compatible = "via,vt8500-pwm";
reg = <0xd8220000 0x1000>;
clocks = <&clkpwm>;

Privacy Policy