aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/spi
diff options
context:
space:
mode:
authorUwe Kleine-König <u.kleine-koenig@pengutronix.de>2014-03-14 20:34:22 (GMT)
committerMark Brown <broonie@linaro.org>2014-03-14 20:36:48 (GMT)
commitf2bb31057a42cb439161066db615ca73e4438e30 (patch)
treeafd2f5399cbcb4d64b933ff72d8ba90099d838c3 /Documentation/devicetree/bindings/spi
parentf9f4cbde587335515acaaef9e23028fc0a616292 (diff)
spi: efm32: properly namespace location property
While reviewing an i2c driver for efm32 that needs a similar property Wolfram Sang pointed out that "location" is a too generic name for something that is efm32 specific. So add an appropriate namespace and fall back to the generic name in case of failure. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
-rw-r--r--Documentation/devicetree/bindings/spi/efm32-spi.txt4
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt
index a590ca5..25c02ba 100644
--- a/Documentation/devicetree/bindings/spi/efm32-spi.txt
+++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt
@@ -8,7 +8,7 @@ Required properties:
- interrupts: pair specifying rx and tx irq
- clocks: phandle to the spi clock
- cs-gpios: see spi-bus.txt
-- location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values.
+- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values.
Example:
@@ -20,7 +20,7 @@ spi1: spi@0x4000c400 { /* USART1 */
interrupts = <15 16>;
clocks = <&cmu 20>;
cs-gpios = <&gpio 51 1>; // D3
- location = <1>;
+ efm32,location = <1>;
status = "ok";
ks8851@0 {

Privacy Policy