aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/video
diff options
context:
space:
mode:
authorLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>2014-09-24 22:09:46 +0300
committerLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>2014-11-26 20:09:40 +0200
commit53d7437acf641423e9bab3b97d95baca850d5159 (patch)
tree6471b4bac7817c9229388aa9748ba2e9fdf0c366 /Documentation/devicetree/bindings/video
parent18df89fef2d5c7cfd15ab898b17a292d00222b0c (diff)
video: Add ADV751[13] DT bindings documentation
The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters compatible with HDMI 1.4 and DVI 1.0. They're described in DT using the OF graph bindings and a list of custom properties pertaining to the input video bus configuration. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Diffstat (limited to 'Documentation/devicetree/bindings/video')
-rw-r--r--Documentation/devicetree/bindings/video/adi,adv7511.txt88
1 files changed, 88 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/video/adi,adv7511.txt b/Documentation/devicetree/bindings/video/adi,adv7511.txt
new file mode 100644
index 000000000000..96c25ee01501
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/adi,adv7511.txt
@@ -0,0 +1,88 @@
+Analog Device ADV7511(W)/13 HDMI Encoders
+-----------------------------------------
+
+The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters
+compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
+S/PDIF, CEC and HDCP.
+
+Required properties:
+
+- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or "adi,adv7513"
+- reg: I2C slave address
+
+The ADV7511 supports a large number of input data formats that differ by their
+color depth, color format, clock mode, bit justification and random
+arrangement of components on the data bus. The combination of the following
+properties describe the input and map directly to the video input tables of the
+ADV7511 datasheet that document all the supported combinations.
+
+- adi,input-depth: Number of bits per color component at the input (8, 10 or
+ 12).
+- adi,input-colorspace: The input color space, one of "rgb", "yuv422" or
+ "yuv444".
+- adi,input-clock: The input clock type, one of "1x" (one clock cycle per
+ pixel), "2x" (two clock cycles per pixel), "ddr" (one clock cycle per pixel,
+ data driven on both edges).
+
+The following input format properties are required except in "rgb 1x" and
+"yuv444 1x" modes, in which case they must not be specified.
+
+- adi,input-style: The input components arrangement variant (1, 2 or 3), as
+ listed in the input format tables in the datasheet.
+- adi,input-justification: The input bit justification ("left", "evenly",
+ "right").
+
+Optional properties:
+
+- interrupts: Specifier for the ADV7511 interrupt
+- pd-gpios: Specifier for the GPIO connected to the power down signal
+
+- adi,clock-delay: Video data clock delay relative to the pixel clock, in ps
+ (-1200 ps .. 1600 ps). Defaults to no delay.
+- adi,embedded-sync: The input uses synchronization signals embedded in the
+ data stream (similar to BT.656). Defaults to separate H/V synchronization
+ signals.
+
+Required nodes:
+
+The ADV7511 has two video ports. Their connections are modelled using the OF
+graph bindings specified in Documentation/devicetree/bindings/graph.txt.
+
+- Video port 0 for the RGB or YUV input
+- Video port 1 for the HDMI output
+
+
+Example
+-------
+
+ adv7511w: hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <39>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511w_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };

Privacy Policy