aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/video
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-08 09:52:16 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-08 09:52:16 -0700
commite9f37d3a8d126e73f5737ef548cdf6f618e295e4 (patch)
tree831eb4952637828a7bbafa361185e0ca57aa86ed /Documentation/devicetree/bindings/video
parent5fb6b953bb7aa86a9c8ea760934982cedc45c52b (diff)
parentc39b06951f1dc2e384650288676c5b7dcc0ec92c (diff)
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie: "Highlights: - drm: Generic display port aux features, primary plane support, drm master management fixes, logging cleanups, enforced locking checks (instead of docs), documentation improvements, minor number handling cleanup, pseudofs for shared inodes. - ttm: add ability to allocate from both ends - i915: broadwell features, power domain and runtime pm, per-process address space infrastructure (not enabled) - msm: power management, hdmi audio support - nouveau: ongoing GPU fault recovery, initial maxwell support, random fixes - exynos: refactored driver to clean up a lot of abstraction, DP support moved into drm, LVDS bridge support added, parallel panel support - gma500: SGX MMU support, SGX irq handling, asle irq work fixes - radeon: video engine bringup, ring handling fixes, use dp aux helpers - vmwgfx: add rendernode support" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits) DRM: armada: fix corruption while loading cursors drm/dp_helper: don't return EPROTO for defers (v2) drm/bridge: export ptn3460_init function drm/exynos: remove MODULE_DEVICE_TABLE definitions ARM: dts: exynos4412-trats2: enable exynos/fimd node ARM: dts: exynos4210-trats: enable exynos/fimd node ARM: dts: exynos4412-trats2: add panel node ARM: dts: exynos4210-trats: add panel node ARM: dts: exynos4: add MIPI DSI Master node drm/panel: add S6E8AA0 driver ARM: dts: exynos4210-universal_c210: add proper panel node drm/panel: add ld9040 driver panel/ld9040: add DT bindings panel/s6e8aa0: add DT bindings drm/exynos: add DSIM driver exynos/dsim: add DT bindings drm/exynos: disallow fbdev initialization if no device is connected drm/mipi_dsi: create dsi devices only for nodes with reg property drm/mipi_dsi: add flags to DSI messages Skip intel_crt_init for Dell XPS 8700 ...
Diffstat (limited to 'Documentation/devicetree/bindings/video')
-rw-r--r--Documentation/devicetree/bindings/video/exynos_dp.txt17
-rw-r--r--Documentation/devicetree/bindings/video/exynos_dsim.txt80
-rw-r--r--Documentation/devicetree/bindings/video/exynos_hdmi.txt5
-rw-r--r--Documentation/devicetree/bindings/video/samsung-fimd.txt17
4 files changed, 119 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 3289d76a21d0..57ccdde02c3a 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -49,6 +49,8 @@ Required properties for dp-controller:
-samsung,lane-count:
number of lanes supported by the panel.
LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
+ - display-timings: timings for the connected panel as described by
+ Documentation/devicetree/bindings/video/display-timing.txt
Optional properties for dp-controller:
-interlaced:
@@ -84,4 +86,19 @@ Board Specific portion:
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
+
+ display-timings {
+ native-mode = <&lcd_timing>;
+ lcd_timing: 1366x768 {
+ clock-frequency = <70589280>;
+ hactive = <1366>;
+ vactive = <768>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <32>;
+ vback-porch = <10>;
+ vfront-porch = <12>;
+ vsync-len = <6>;
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
new file mode 100644
index 000000000000..33b5730d07ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
@@ -0,0 +1,80 @@
+Exynos MIPI DSI Master
+
+Required properties:
+ - compatible: "samsung,exynos4210-mipi-dsi"
+ - reg: physical base address and length of the registers set for the device
+ - interrupts: should contain DSI interrupt
+ - clocks: list of clock specifiers, must contain an entry for each required
+ entry in clock-names
+ - clock-names: should include "bus_clk"and "pll_clk" entries
+ - phys: list of phy specifiers, must contain an entry for each required
+ entry in phy-names
+ - phy-names: should include "dsim" entry
+ - vddcore-supply: MIPI DSIM Core voltage supply (e.g. 1.1V)
+ - vddio-supply: MIPI DSIM I/O and PLL voltage supply (e.g. 1.8V)
+ - samsung,pll-clock-frequency: specifies frequency of the "pll_clk" clock
+ - #address-cells, #size-cells: should be set respectively to <1> and <0>
+ according to DSI host bindings (see MIPI DSI bindings [1])
+
+Optional properties:
+ - samsung,power-domain: a phandle to DSIM power domain node
+
+Child nodes:
+ Should contain DSI peripheral nodes (see MIPI DSI bindings [1]).
+
+Video interfaces:
+ Device node can contain video interface port nodes according to [2].
+ The following are properties specific to those nodes:
+
+ port node:
+ - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port;
+
+ endpoint node of DSI port (reg = 1):
+ - samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
+ mode
+ - samsung,esc-clock-frequency: specifies DSI frequency in escape mode
+
+[1]: Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ dsi@11C80000 {
+ compatible = "samsung,exynos4210-mipi-dsi";
+ reg = <0x11C80000 0x10000>;
+ interrupts = <0 79 0>;
+ clocks = <&clock 286>, <&clock 143>;
+ clock-names = "bus_clk", "pll_clk";
+ phys = <&mipi_phy 1>;
+ phy-names = "dsim";
+ vddcore-supply = <&vusb_reg>;
+ vddio-supply = <&vmipi_reg>;
+ samsung,power-domain = <&pd_lcd0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,pll-clock-frequency = <24000000>;
+
+ panel@1 {
+ reg = <0>;
+ ...
+ port {
+ panel_ep: endpoint {
+ remote-endpoint = <&dsi_ep>;
+ };
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ dsi_ep: endpoint {
+ reg = <0>;
+ samsung,burst-clock-frequency = <500000000>;
+ samsung,esc-clock-frequency = <20000000>;
+ remote-endpoint = <&panel_ep>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
index 50decf8e1b90..f9187a259259 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
@@ -25,6 +25,9 @@ Required properties:
sclk_pixel.
- clock-names: aliases as per driver requirements for above clock IDs:
"hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi".
+- ddc: phandle to the hdmi ddc node
+- phy: phandle to the hdmi phy node
+
Example:
hdmi {
@@ -32,4 +35,6 @@ Example:
reg = <0x14530000 0x100000>;
interrupts = <0 95 0>;
hpd-gpio = <&gpx3 7 1>;
+ ddc = <&hdmi_ddc_node>;
+ phy = <&hdmi_phy_node>;
};
diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt
index 778838a0336a..2dad41b689af 100644
--- a/Documentation/devicetree/bindings/video/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt
@@ -39,6 +39,23 @@ Required properties:
Optional Properties:
- samsung,power-domain: a phandle to FIMD power domain node.
+- samsung,invert-vden: video enable signal is inverted
+- samsung,invert-vclk: video clock signal is inverted
+- display-timings: timing settings for FIMD, as described in document [1].
+ Can be used in case timings cannot be provided otherwise
+ or to override timings provided by the panel.
+
+The device node can contain 'port' child nodes according to the bindings defined
+in [2]. The following are properties specific to those nodes:
+- reg: (required) port index, can be:
+ 0 - for CAMIF0 input,
+ 1 - for CAMIF1 input,
+ 2 - for CAMIF2 input,
+ 3 - for parallel output,
+ 4 - for write-back interface
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+[2]: Documentation/devicetree/bindings/media/video-interfaces.txt
Example:

Privacy Policy