aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-08-08 17:39:48 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-08-08 17:39:48 -0700
commit664fb23070ae66a023250a83870a5bae7cd0efeb (patch)
treefb2c18fcd1742ece0813d4c316f42ac23c01cd04 /Documentation/devicetree/bindings
parent8065be8d032f38da25b54bf077a05a30d9ce9f2a (diff)
parentc704b4ef1a819b053fd33617e861da1932077314 (diff)
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: - big update to Wacom driver by Benjamin Tissoires, converting it to HID infrastructure and unifying USB and Bluetooth models - large update to ALPS driver by Hans de Goede, which adds support for newer touchpad models as well as cleans up and restructures the code - more changes to Atmel MXT driver, including device tree support - new driver for iPaq x3xxx touchscreen - driver for serial Wacom tablets - driver for Microchip's CAP1106 - assorted cleanups and improvements to existing drover and input core * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits) Input: wacom - update the ABI doc according to latest changes Input: wacom - only register once the MODULE_* macros Input: HID - remove hid-wacom Bluetooth driver Input: wacom - add copyright note and bump version to 2.0 Input: wacom - remove passing id for wacom_set_report Input: wacom - check for bluetooth protocol while setting OLEDs Input: wacom - handle Intuos 4 BT in wacom.ko Input: wacom - handle Graphire BT tablets in wacom.ko Input: wacom - prepare the driver to include BT devices Input: hyperv-keyboard - register as a wakeup source Input: imx_keypad - remove ifdef round PM methods Input: jornada720_ts - get rid of space indentation and use tab Input: jornada720_ts - switch to using managed resources Input: alps - Rushmore and v7 resolution support Input: mcs5000_ts - remove ifdef around power management methods Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP Input: ads7846 - release resources on failure for clean exit Input: wacom - add support for 0x12C ISDv4 sensor Input: atmel_mxt_ts - use deep sleep mode when stopped ARM: dts: am437x-gp-evm: Update binding for touchscreen size ...
Diffstat (limited to 'Documentation/devicetree/bindings')
-rw-r--r--Documentation/devicetree/bindings/input/atmel,maxtouch.txt25
-rw-r--r--Documentation/devicetree/bindings/input/cap1106.txt53
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt26
-rw-r--r--Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt4
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
5 files changed, 109 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
new file mode 100644
index 000000000000..baef432e8369
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -0,0 +1,25 @@
+Atmel maXTouch touchscreen/touchpad
+
+Required properties:
+- compatible:
+ atmel,maxtouch
+
+- reg: The I2C address of the device
+
+- interrupts: The sink for the touchpad's IRQ output
+ See ../interrupt-controller/interrupts.txt
+
+Optional properties for main touchpad device:
+
+- linux,gpio-keymap: An array of up to 4 entries indicating the Linux
+ keycode generated by each GPIO. Linux keycodes are defined in
+ <dt-bindings/input/input.h>.
+
+Example:
+
+ touch@4b {
+ compatible = "atmel,maxtouch";
+ reg = <0x4b>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/input/cap1106.txt b/Documentation/devicetree/bindings/input/cap1106.txt
new file mode 100644
index 000000000000..4b463904cba0
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cap1106.txt
@@ -0,0 +1,53 @@
+Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor
+
+The node for this driver must be a child of a I2C controller node, as the
+device communication via I2C only.
+
+Required properties:
+
+ compatible: Must be "microchip,cap1106"
+
+ reg: The I2C slave address of the device.
+ Only 0x28 is valid.
+
+ interrupts: Property describing the interrupt line the
+ device's ALERT#/CM_IRQ# pin is connected to.
+ The device only has one interrupt source.
+
+Optional properties:
+
+ autorepeat: Enables the Linux input system's autorepeat
+ feature on the input device.
+
+ microchip,sensor-gain: Defines the gain of the sensor circuitry. This
+ effectively controls the sensitivity, as a
+ smaller delta capacitance is required to
+ generate the same delta count values.
+ Valid values are 1, 2, 4, and 8.
+ By default, a gain of 1 is set.
+
+ linux,keycodes: Specifies an array of numeric keycode values to
+ be used for the channels. If this property is
+ omitted, KEY_A, KEY_B, etc are used as
+ defaults. The array must have exactly six
+ entries.
+
+Example:
+
+i2c_controller {
+ cap1106@28 {
+ compatible = "microchip,cap1106";
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 0>;
+ reg = <0x28>;
+ autorepeat;
+ microchip,sensor-gain = <2>;
+
+ linux,keycodes = <103 /* KEY_UP */
+ 106 /* KEY_RIGHT */
+ 108 /* KEY_DOWN */
+ 105 /* KEY_LEFT */
+ 109 /* KEY_PAGEDOWN */
+ 104>; /* KEY_PAGEUP */
+ };
+}
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
new file mode 100644
index 000000000000..6e551090f465
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -0,0 +1,26 @@
+* Pixcir I2C touchscreen controllers
+
+Required properties:
+- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
+- reg: I2C address of the chip
+- interrupts: interrupt to which the chip is connected
+- attb-gpio: GPIO connected to the ATTB line of the chip
+- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
+- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
+
+Example:
+
+ i2c@00000000 {
+ /* ... */
+
+ pixcir_ts@5c {
+ compatible = "pixcir,pixcir_ts";
+ reg = <0x5c>;
+ interrupts = <2 0>;
+ attb-gpio = <&gpf 2 0 2>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <600>;
+ };
+
+ /* ... */
+ };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
index 2faf1f1fa39e..80c37df940a7 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt
@@ -9,6 +9,9 @@ Required properties:
- x-size: horizontal resolution of touchscreen
- y-size: vertical resolution of touchscreen
+Optional properties:
+- vdd-supply: Regulator controlling the controller supply
+
Example:
i2c@00000000 {
@@ -18,6 +21,7 @@ Example:
compatible = "neonode,zforce";
reg = <0x50>;
interrupts = <2 0>;
+ vdd-supply = <&reg_zforce_vdd>;
gpios = <&gpio5 6 0>, /* INT */
<&gpio5 9 0>; /* RST */
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 3dc9188ce023..ac7269f90764 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -103,6 +103,7 @@ panasonic Panasonic Corporation
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
plathome Plat'Home Co., Ltd.
+pixcir PIXCIR MICROELECTRONICS Co., Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc

Privacy Policy