path: root/Documentation/devicetree
diff options
authorLinus Torvalds <torvalds@linux-foundation.org>2014-01-25 11:17:34 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2014-01-25 11:17:34 -0800
commit4ba9920e5e9c0e16b5ed24292d45322907bb9035 (patch)
tree7d023baea59ed0886ded1f0b6d1c6385690b88f7 /Documentation/devicetree
parent82c477669a4665eb4e52030792051e0559ee2a36 (diff)
parent8b662fe70c68282f78482dc272df0c4f355e49f5 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: 1) BPF debugger and asm tool by Daniel Borkmann. 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann. 3) Correct reciprocal_divide and update users, from Hannes Frederic Sowa and Daniel Borkmann. 4) Currently we only have a "set" operation for the hw timestamp socket ioctl, add a "get" operation to match. From Ben Hutchings. 5) Add better trace events for debugging driver datapath problems, also from Ben Hutchings. 6) Implement auto corking in TCP, from Eric Dumazet. Basically, if we have a small send and a previous packet is already in the qdisc or device queue, defer until TX completion or we get more data. 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko. 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel Borkmann. 9) Share IP header compression code between Bluetooth and IEEE802154 layers, from Jukka Rissanen. 10) Fix ipv6 router reachability probing, from Jiri Benc. 11) Allow packets to be captured on macvtap devices, from Vlad Yasevich. 12) Support tunneling in GRO layer, from Jerry Chu. 13) Allow bonding to be configured fully using netlink, from Scott Feldman. 14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can already get the TCI. From Atzm Watanabe. 15) New "Heavy Hitter" qdisc, from Terry Lam. 16) Significantly improve the IPSEC support in pktgen, from Fan Du. 17) Allow ipv4 tunnels to cache routes, just like sockets. From Tom Herbert. 18) Add Proportional Integral Enhanced packet scheduler, from Vijay Subramanian. 19) Allow openvswitch to mmap'd netlink, from Thomas Graf. 20) Key TCP metrics blobs also by source address, not just destination address. From Christoph Paasch. 21) Support 10G in generic phylib. From Andy Fleming. 22) Try to short-circuit GRO flow compares using device provided RX hash, if provided. From Tom Herbert. The wireless and netfilter folks have been busy little bees too. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits) net/cxgb4: Fix referencing freed adapter ipv6: reallocate addrconf router for ipv6 address when lo device up fib_frontend: fix possible NULL pointer dereference rtnetlink: remove IFLA_BOND_SLAVE definition rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info qlcnic: update version to 5.3.55 qlcnic: Enhance logic to calculate msix vectors. qlcnic: Refactor interrupt coalescing code for all adapters. qlcnic: Update poll controller code path qlcnic: Interrupt code cleanup qlcnic: Enhance Tx timeout debugging. qlcnic: Use bool for rx_mac_learn. bonding: fix u64 division rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC sfc: Use the correct maximum TX DMA ring size for SFC9100 Add Shradha Shah as the sfc driver maintainer. net/vxlan: Share RX skb de-marking and checksum checks with ovs tulip: cleanup by using ARRAY_SIZE() ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called net/cxgb4: Don't retrieve stats during recovery ...
Diffstat (limited to 'Documentation/devicetree')
5 files changed, 61 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
new file mode 100644
index 000000000000..ea4d752389a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt
@@ -0,0 +1,27 @@
+* Allwinner GMAC ethernet controller
+This device is a platform glue layer for stmmac.
+Please see stmmac.txt for the other unchanged properties.
+Required properties:
+ - compatible: Should be "allwinner,sun7i-a20-gmac"
+ - clocks: Should contain the GMAC main clock, and tx clock
+ The tx clock type should be "allwinner,sun7i-a20-gmac-clk"
+ - clock-names: Should contain the clock names "stmmaceth",
+ and "allwinner_gmac_tx"
+Optional properties:
+- phy-supply: phandle to a regulator if the PHY needs one
+ gmac: ethernet@01c50000 {
+ compatible = "allwinner,sun7i-a20-gmac";
+ reg = <0x01c50000 0x10000>,
+ <0x01c20164 0x4>;
+ interrupts = <0 85 1>;
+ interrupt-names = "macirq";
+ clocks = <&ahb_gates 49>, <&gmac_tx>;
+ clock-names = "stmmaceth", "allwinner_gmac_tx";
+ phy-mode = "mii";
+ };
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
new file mode 100644
index 000000000000..ee3723beb701
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251x.txt
@@ -0,0 +1,25 @@
+* Microchip MCP251X stand-alone CAN controller device tree bindings
+Required properties:
+ - compatible: Should be one of the following:
+ - "microchip,mcp2510" for MCP2510.
+ - "microchip,mcp2515" for MCP2515.
+ - reg: SPI chip select.
+ - clocks: The clock feeding the CAN controller.
+ - interrupt-parent: The parent interrupt controller.
+ - interrupts: Should contain IRQ line for the CAN controller.
+Optional properties:
+ - vdd-supply: Regulator that powers the CAN controller.
+ - xceiver-supply: Regulator that powers the CAN transceiver.
+ can0: can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk24m>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <13 0x2>;
+ vdd-supply = <&reg5v0>;
+ xceiver-supply = <&reg5v0>;
+ };
diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt
index bad381faf036..ca0911a20e8b 100644
--- a/Documentation/devicetree/bindings/net/davinci_emac.txt
+++ b/Documentation/devicetree/bindings/net/davinci_emac.txt
@@ -12,8 +12,6 @@ Required properties:
- ti,davinci-ctrl-ram-size: size of control module ram
- ti,davinci-rmii-en: use RMII
- ti,davinci-no-bd-ram: has the emac controller BD RAM
-- phy-handle: Contains a phandle to an Ethernet PHY.
- if not, davinci_emac driver defaults to 100/FULL
- interrupts: interrupt mapping for the davinci emac interrupts sources:
4 sources: <Receive Threshold Interrupt
Receive Interrupt
@@ -21,6 +19,8 @@ Required properties:
Miscellaneous Interrupt>
Optional properties:
+- phy-handle: Contains a phandle to an Ethernet PHY.
+ If absent, davinci_emac driver defaults to 100/FULL.
- local-mac-address : 6 bytes, mac address
Example (enbw_cmc board):
diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 85de6107b98f..58307d0931c8 100644
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -19,6 +19,7 @@ Optional Properties:
specifications. If neither of these are specified, the default is to
assume clause 22. The compatible list may also contain other
+- max-speed: Maximum PHY supported speed (10, 100, 1000...)
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt
index eba0e5e59ebe..9d92d42140f2 100644
--- a/Documentation/devicetree/bindings/net/stmmac.txt
+++ b/Documentation/devicetree/bindings/net/stmmac.txt
@@ -12,7 +12,6 @@ Required properties:
- phy-mode: String, operation mode of the PHY interface.
Supported values are: "mii", "rmii", "gmii", "rgmii".
-- snps,phy-addr phy address to connect to.
- snps,reset-gpio gpio number for phy reset.
- snps,reset-active-low boolean flag to indicate if phy reset is active low.
- snps,reset-delays-us is triplet of delays
@@ -30,6 +29,11 @@ Required properties:
Optional properties:
- mac-address: 6 bytes, mac address
+- resets: Should contain a phandle to the STMMAC reset signal, if any
+- reset-names: Should contain the reset signal name "stmmaceth", if a
+ reset phandle is given
+- max-frame-size: Maximum Transfer Unit (IEEE defined MTU), rather
+ than the maximum frame size.
@@ -40,5 +44,6 @@ Examples:
interrupts = <24 23>;
interrupt-names = "macirq", "eth_wake_irq";
mac-address = [000000000000]; /* Filled in by U-Boot */
+ max-frame-size = <3800>;
phy-mode = "gmii";

Privacy Policy