aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Documentation/devicetree/bindings/bus/ti-gpmc.txt103
-rw-r--r--Documentation/devicetree/bindings/clock/exynos4-clock.txt288
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5250-clock.txt177
-rw-r--r--Documentation/devicetree/bindings/clock/exynos5440-clock.txt61
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt303
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt4
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-vt8500.txt24
-rw-r--r--Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt53
-rw-r--r--Documentation/devicetree/bindings/media/s5p-mfc.txt21
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-nor.txt98
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmc-onenand.txt3
-rw-r--r--Documentation/devicetree/bindings/net/gpmc-eth.txt97
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt57
-rw-r--r--Documentation/devicetree/bindings/reset/reset.txt75
-rw-r--r--Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt17
-rw-r--r--Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt68
-rw-r--r--Documentation/devicetree/bindings/usb/exynos-usb.txt40
-rw-r--r--arch/arm/Kconfig16
-rw-r--r--arch/arm/boot/dts/Makefile3
-rw-r--r--arch/arm/boot/dts/cros5250-common.dtsi138
-rw-r--r--arch/arm/boot/dts/exynos4.dtsi58
-rw-r--r--arch/arm/boot/dts/exynos4210-origen.dts18
-rw-r--r--arch/arm/boot/dts/exynos4210-smdkv310.dts18
-rw-r--r--arch/arm/boot/dts/exynos4210-trats.dts12
-rw-r--r--arch/arm/boot/dts/exynos4210.dtsi36
-rw-r--r--arch/arm/boot/dts/exynos4212.dtsi22
-rw-r--r--arch/arm/boot/dts/exynos4412-odroidx.dts111
-rw-r--r--arch/arm/boot/dts/exynos4412-origen.dts432
-rw-r--r--arch/arm/boot/dts/exynos4412-smdk4412.dts25
-rw-r--r--arch/arm/boot/dts/exynos4412.dtsi26
-rw-r--r--arch/arm/boot/dts/exynos4x12.dtsi6
-rw-r--r--arch/arm/boot/dts/exynos5250-arndale.dts129
-rw-r--r--arch/arm/boot/dts/exynos5250-smdk5250.dts20
-rw-r--r--arch/arm/boot/dts/exynos5250-snow.dts11
-rw-r--r--arch/arm/boot/dts/exynos5250.dtsi149
-rw-r--r--arch/arm/boot/dts/exynos5440-ssdk5440.dts19
-rw-r--r--arch/arm/boot/dts/exynos5440.dtsi67
-rw-r--r--arch/arm/boot/dts/omap3-beagle.dts71
-rw-r--r--arch/arm/boot/dts/omap3.dtsi31
-rw-r--r--arch/arm/boot/dts/omap4.dtsi30
-rw-r--r--arch/arm/boot/dts/tegra114-dalmore.dts1
-rw-r--r--arch/arm/boot/dts/tegra114-pluto.dts1
-rw-r--r--arch/arm/boot/dts/tegra114.dtsi8
-rw-r--r--arch/arm/boot/dts/vt8500.dtsi10
-rw-r--r--arch/arm/boot/dts/wm8505.dtsi10
-rw-r--r--arch/arm/boot/dts/wm8650.dtsi10
-rw-r--r--arch/arm/boot/dts/wm8850.dtsi10
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi45
-rw-r--r--arch/arm/boot/dts/zynq-zc702.dts10
-rw-r--r--arch/arm/mach-at91/at91sam9261.c2
-rw-r--r--arch/arm/mach-at91/at91sam9261_devices.c6
-rw-r--r--arch/arm/mach-at91/at91sam9263.c1
-rw-r--r--arch/arm/mach-at91/at91sam9263_devices.c2
-rw-r--r--arch/arm/mach-at91/at91sam9g45.c2
-rw-r--r--arch/arm/mach-at91/at91sam9g45_devices.c6
-rw-r--r--arch/arm/mach-at91/at91sam9rl.c1
-rw-r--r--arch/arm/mach-at91/at91sam9rl_devices.c2
-rw-r--r--arch/arm/mach-exynos/Kconfig12
-rw-r--r--arch/arm/mach-exynos/Makefile6
-rw-r--r--arch/arm/mach-exynos/clock-exynos4.c1601
-rw-r--r--arch/arm/mach-exynos/clock-exynos4.h35
-rw-r--r--arch/arm/mach-exynos/clock-exynos4210.c187
-rw-r--r--arch/arm/mach-exynos/clock-exynos4212.c201
-rw-r--r--arch/arm/mach-exynos/clock-exynos5.c1645
-rw-r--r--arch/arm/mach-exynos/common.c88
-rw-r--r--arch/arm/mach-exynos/common.h10
-rw-r--r--arch/arm/mach-exynos/include/mach/irqs.h19
-rw-r--r--arch/arm/mach-exynos/include/mach/map.h1
-rw-r--r--arch/arm/mach-exynos/include/mach/regs-mct.h53
-rw-r--r--arch/arm/mach-exynos/mach-armlex4210.c3
-rw-r--r--arch/arm/mach-exynos/mach-exynos4-dt.c122
-rw-r--r--arch/arm/mach-exynos/mach-exynos5-dt.c141
-rw-r--r--arch/arm/mach-exynos/mach-nuri.c5
-rw-r--r--arch/arm/mach-exynos/mach-origen.c5
-rw-r--r--arch/arm/mach-exynos/mach-smdk4x12.c5
-rw-r--r--arch/arm/mach-exynos/mach-smdkv310.c7
-rw-r--r--arch/arm/mach-exynos/mach-universal_c210.c9
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c21
-rw-r--r--arch/arm/mach-omap2/board-3630sdp.c21
-rw-r--r--arch/arm/mach-omap2/board-am3517crane.c24
-rw-r--r--arch/arm/mach-omap2/board-am3517evm.c17
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c20
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c22
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c8
-rw-r--r--arch/arm/mach-omap2/board-generic.c2
-rw-r--r--arch/arm/mach-omap2/board-igep0020.c32
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c32
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c25
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c21
-rw-r--r--arch/arm/mach-omap2/board-omap3stalker.c17
-rw-r--r--arch/arm/mach-omap2/board-omap3touchbook.c17
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c55
-rw-r--r--arch/arm/mach-omap2/board-overo.c16
-rw-r--r--arch/arm/mach-omap2/board-zoom.c16
-rw-r--r--arch/arm/mach-omap2/common.h3
-rw-r--r--arch/arm/mach-omap2/gpmc-nand.c42
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c118
-rw-r--r--arch/arm/mach-omap2/gpmc-smc91x.c30
-rw-r--r--arch/arm/mach-omap2/gpmc.c544
-rw-r--r--arch/arm/mach-omap2/gpmc.h43
-rw-r--r--arch/arm/mach-omap2/timer.c128
-rw-r--r--arch/arm/mach-omap2/usb-host.c160
-rw-r--r--arch/arm/mach-omap2/usb-tusb6010.c62
-rw-r--r--arch/arm/mach-omap2/usb.h9
-rw-r--r--arch/arm/mach-s3c24xx/Kconfig7
-rw-r--r--arch/arm/mach-s3c24xx/Makefile8
-rw-r--r--arch/arm/mach-s3c24xx/common.h4
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/entry-macro.S70
-rw-r--r--arch/arm/mach-s3c24xx/include/mach/irqs.h58
-rw-r--r--arch/arm/mach-s3c24xx/irq-s3c2412.c215
-rw-r--r--arch/arm/mach-s3c24xx/irq-s3c2440.c128
-rw-r--r--arch/arm/mach-s3c24xx/irq-s3c244x.c142
-rw-r--r--arch/arm/mach-s3c24xx/mach-amlm5900.c7
-rw-r--r--arch/arm/mach-s3c24xx/mach-anubis.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-at2440evb.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-bast.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-gta02.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-h1940.c12
-rw-r--r--arch/arm/mach-s3c24xx/mach-jive.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-mini2440.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-n30.c10
-rw-r--r--arch/arm/mach-s3c24xx/mach-nexcoder.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-osiris.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-otom.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-qt2410.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-rx1950.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-rx3715.c11
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2410.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2413.c14
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2416.c4
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2440.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-smdk2443.c4
-rw-r--r--arch/arm/mach-s3c24xx/mach-tct_hammer.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-vr1000.c6
-rw-r--r--arch/arm/mach-s3c24xx/mach-vstms.c6
-rw-r--r--arch/arm/mach-s3c24xx/pm-s3c2412.c8
-rw-r--r--arch/arm/mach-s3c64xx/Kconfig2
-rw-r--r--arch/arm/mach-s3c64xx/mach-anw6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-crag6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-hmt.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-mini6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-ncp.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-real6410.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-smartq.c2
-rw-r--r--arch/arm/mach-s3c64xx/mach-smartq5.c3
-rw-r--r--arch/arm/mach-s3c64xx/mach-smartq7.c3
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6400.c4
-rw-r--r--arch/arm/mach-s3c64xx/mach-smdk6410.c4
-rw-r--r--arch/arm/mach-s5p64x0/Kconfig4
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6440.c6
-rw-r--r--arch/arm/mach-s5p64x0/mach-smdk6450.c6
-rw-r--r--arch/arm/mach-s5pc100/Kconfig1
-rw-r--r--arch/arm/mach-s5pc100/mach-smdkc100.c4
-rw-r--r--arch/arm/mach-s5pv210/Kconfig2
-rw-r--r--arch/arm/mach-s5pv210/mach-aquila.c6
-rw-r--r--arch/arm/mach-s5pv210/mach-goni.c6
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkc110.c6
-rw-r--r--arch/arm/mach-s5pv210/mach-smdkv210.c6
-rw-r--r--arch/arm/mach-s5pv210/mach-torbreck.c6
-rw-r--r--arch/arm/mach-shmobile/Kconfig2
-rw-r--r--arch/arm/mach-shmobile/board-kzm9g.c14
-rw-r--r--arch/arm/mach-shmobile/include/mach/common.h1
-rw-r--r--arch/arm/mach-shmobile/include/mach/irqs.h4
-rw-r--r--arch/arm/mach-shmobile/intc-r8a7779.c53
-rw-r--r--arch/arm/mach-shmobile/intc-sh73a0.c117
-rw-r--r--arch/arm/mach-shmobile/setup-sh73a0.c126
-rw-r--r--arch/arm/mach-tegra/tegra.c3
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c34
-rw-r--r--arch/arm/mach-vt8500/Kconfig1
-rw-r--r--arch/arm/mach-vt8500/Makefile2
-rw-r--r--arch/arm/mach-vt8500/common.h6
-rw-r--r--arch/arm/mach-vt8500/vt8500.c14
-rw-r--r--arch/arm/mach-zynq/Kconfig1
-rw-r--r--arch/arm/mach-zynq/Makefile2
-rw-r--r--arch/arm/mach-zynq/common.c3
-rw-r--r--arch/arm/mach-zynq/common.h2
-rw-r--r--arch/arm/mach-zynq/timer.c324
-rw-r--r--arch/arm/plat-samsung/Kconfig6
-rw-r--r--arch/arm/plat-samsung/Makefile3
-rw-r--r--arch/arm/plat-samsung/devs.c2
-rw-r--r--arch/arm/plat-samsung/include/plat/cpu.h15
-rw-r--r--arch/arm/plat-samsung/include/plat/s5p-time.h40
-rw-r--r--arch/arm/plat-samsung/include/plat/samsung-time.h53
-rw-r--r--arch/arm/plat-samsung/samsung-time.c (renamed from arch/arm/plat-samsung/s5p-time.c)138
-rw-r--r--arch/arm/plat-samsung/time.c287
-rw-r--r--arch/avr32/mach-at32ap/at32ap700x.c6
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/Makefile3
-rw-r--r--drivers/clk/Makefile1
-rw-r--r--drivers/clk/samsung/Makefile8
-rw-r--r--drivers/clk/samsung/clk-exynos4.c1091
-rw-r--r--drivers/clk/samsung/clk-exynos5250.c523
-rw-r--r--drivers/clk/samsung/clk-exynos5440.c139
-rw-r--r--drivers/clk/samsung/clk-pll.c419
-rw-r--r--drivers/clk/samsung/clk-pll.h41
-rw-r--r--drivers/clk/samsung/clk.c320
-rw-r--r--drivers/clk/samsung/clk.h289
-rw-r--r--drivers/clk/tegra/Makefile1
-rw-r--r--drivers/clk/tegra/clk-periph-gate.c11
-rw-r--r--drivers/clk/tegra/clk-periph.c14
-rw-r--r--drivers/clk/tegra/clk-pll.c1144
-rw-r--r--drivers/clk/tegra/clk-tegra114.c2085
-rw-r--r--drivers/clk/tegra/clk-tegra20.c184
-rw-r--r--drivers/clk/tegra/clk-tegra30.c276
-rw-r--r--drivers/clk/tegra/clk.c14
-rw-r--r--drivers/clk/tegra/clk.h98
-rw-r--r--drivers/clocksource/Kconfig8
-rw-r--r--drivers/clocksource/Makefile2
-rw-r--r--drivers/clocksource/cadence_ttc_timer.c436
-rw-r--r--drivers/clocksource/em_sti.c13
-rw-r--r--drivers/clocksource/exynos_mct.c (renamed from arch/arm/mach-exynos/mct.c)217
-rw-r--r--drivers/clocksource/sh_cmt.c189
-rw-r--r--drivers/clocksource/sh_mtu2.c2
-rw-r--r--drivers/clocksource/sh_tmu.c2
-rw-r--r--drivers/gpio/Kconfig6
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/gpio-samsung.c9
-rw-r--r--drivers/gpio/gpio-vt8500.c355
-rw-r--r--drivers/irqchip/Kconfig8
-rw-r--r--drivers/irqchip/Makefile4
-rw-r--r--drivers/irqchip/exynos-combiner.c80
-rw-r--r--drivers/irqchip/irq-renesas-intc-irqpin.c547
-rw-r--r--drivers/irqchip/irq-renesas-irqc.c307
-rw-r--r--drivers/irqchip/irq-s3c24xx.c (renamed from arch/arm/mach-s3c24xx/irq.c)691
-rw-r--r--drivers/irqchip/irq-vt8500.c (renamed from arch/arm/mach-vt8500/irq.c)6
-rw-r--r--drivers/of/base.c111
-rw-r--r--drivers/pinctrl/Kconfig1
-rw-r--r--drivers/pinctrl/Makefile1
-rw-r--r--drivers/pinctrl/pinctrl-bcm2835.c19
-rw-r--r--drivers/pinctrl/pinctrl-exynos.c108
-rw-r--r--drivers/pinctrl/pinctrl-samsung.c2
-rw-r--r--drivers/pinctrl/pinctrl-samsung.h1
-rw-r--r--drivers/pinctrl/sh-pfc/pfc-sh73a0.c6
-rw-r--r--drivers/pinctrl/vt8500/Kconfig52
-rw-r--r--drivers/pinctrl/vt8500/Makefile8
-rw-r--r--drivers/pinctrl/vt8500/pinctrl-vt8500.c501
-rw-r--r--drivers/pinctrl/vt8500/pinctrl-wm8505.c532
-rw-r--r--drivers/pinctrl/vt8500/pinctrl-wm8650.c370
-rw-r--r--drivers/pinctrl/vt8500/pinctrl-wm8750.c409
-rw-r--r--drivers/pinctrl/vt8500/pinctrl-wm8850.c388
-rw-r--r--drivers/pinctrl/vt8500/pinctrl-wmt.c632
-rw-r--r--drivers/pinctrl/vt8500/pinctrl-wmt.h79
-rw-r--r--drivers/reset/Kconfig13
-rw-r--r--drivers/reset/Makefile1
-rw-r--r--drivers/reset/core.c297
-rw-r--r--drivers/video/atmel_lcdfb.c120
-rw-r--r--include/linux/clk/tegra.h1
-rw-r--r--include/linux/of.h9
-rw-r--r--include/linux/platform_data/irq-renesas-intc-irqpin.h29
-rw-r--r--include/linux/platform_data/irq-renesas-irqc.h27
-rw-r--r--include/linux/reset-controller.h51
-rw-r--r--include/linux/reset.h17
-rw-r--r--include/video/atmel_lcdc.h4
253 files changed, 16905 insertions, 7306 deletions
diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
index 5ddb2e9efaaa..4b87ea1194e3 100644
--- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
@@ -35,36 +35,83 @@ Required properties:
Timing properties for child nodes. All are optional and default to 0.
- - gpmc,sync-clk: Minimum clock period for synchronous mode, in picoseconds
-
- Chip-select signal timings corresponding to GPMC_CONFIG2:
- - gpmc,cs-on: Assertion time
- - gpmc,cs-rd-off: Read deassertion time
- - gpmc,cs-wr-off: Write deassertion time
-
- ADV signal timings corresponding to GPMC_CONFIG3:
- - gpmc,adv-on: Assertion time
- - gpmc,adv-rd-off: Read deassertion time
- - gpmc,adv-wr-off: Write deassertion time
-
- WE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,we-on: Assertion time
- - gpmc,we-off: Deassertion time
-
- OE signals timings corresponding to GPMC_CONFIG4:
- - gpmc,oe-on: Assertion time
- - gpmc,oe-off: Deassertion time
-
- Access time and cycle time timings corresponding to GPMC_CONFIG5:
- - gpmc,page-burst-access: Multiple access word delay
- - gpmc,access: Start-cycle to first data valid delay
- - gpmc,rd-cycle: Total read cycle time
- - gpmc,wr-cycle: Total write cycle time
+ - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds
+
+ Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
+ - gpmc,cs-on-ns: Assertion time
+ - gpmc,cs-rd-off-ns: Read deassertion time
+ - gpmc,cs-wr-off-ns: Write deassertion time
+
+ ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
+ - gpmc,adv-on-ns: Assertion time
+ - gpmc,adv-rd-off-ns: Read deassertion time
+ - gpmc,adv-wr-off-ns: Write deassertion time
+
+ WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,we-on-ns Assertion time
+ - gpmc,we-off-ns: Deassertion time
+
+ OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
+ - gpmc,oe-on-ns: Assertion time
+ - gpmc,oe-off-ns: Deassertion time
+
+ Access time and cycle time timings (in nanoseconds) corresponding to
+ GPMC_CONFIG5:
+ - gpmc,page-burst-access-ns: Multiple access word delay
+ - gpmc,access-ns: Start-cycle to first data valid delay
+ - gpmc,rd-cycle-ns: Total read cycle time
+ - gpmc,wr-cycle-ns: Total write cycle time
+ - gpmc,bus-turnaround-ns: Turn-around time between successive accesses
+ - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses
+ - gpmc,clk-activation-ns: GPMC clock activation time
+ - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid
+ data
+
+Boolean timing parameters. If property is present parameter enabled and
+disabled if omitted:
+ - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock
+ - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock
+ - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive
+ accesses to a different CS
+ - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive
+ accesses to the same CS
+ - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock
+ - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock
+ - gpmc,time-para-granularity: Multiply all access times by 2
The following are only applicable to OMAP3+ and AM335x:
- - gpmc,wr-access
- - gpmc,wr-data-mux-bus
-
+ - gpmc,wr-access-ns: In synchronous write mode, for single or
+ burst accesses, defines the number of
+ GPMC_FCLK cycles from start access time
+ to the GPMC_CLK rising edge used by the
+ memory device for the first data capture.
+ - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies
+ the time when the first data is driven on
+ the address-data bus.
+
+GPMC chip-select settings properties for child nodes. All are optional.
+
+- gpmc,burst-length Page/burst length. Must be 4, 8 or 16.
+- gpmc,burst-wrap Enables wrap bursting
+- gpmc,burst-read Enables read page/burst mode
+- gpmc,burst-write Enables write page/burst mode
+- gpmc,device-nand Device is NAND
+- gpmc,device-width Total width of device(s) connected to a GPMC
+ chip-select in bytes. The GPMC supports 8-bit
+ and 16-bit devices and so this property must be
+ 1 or 2.
+- gpmc,mux-add-data Address and data multiplexing configuration.
+ Valid values are 1 for address-address-data
+ multiplexing mode and 2 for address-data
+ multiplexing mode.
+- gpmc,sync-read Enables synchronous read. Defaults to asynchronous
+ is this is not set.
+- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous
+ is this is not set.
+- gpmc,wait-pin Wait-pin used by client. Must be less than
+ "gpmc,num-waitpins".
+- gpmc,wait-on-read Enables wait monitoring on reads.
+- gpmc,wait-on-write Enables wait monitoring on writes.
Example for an AM33xx board:
diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
new file mode 100644
index 000000000000..ea5e26f16aec
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt
@@ -0,0 +1,288 @@
+* Samsung Exynos4 Clock Controller
+
+The Exynos4 clock controller generates and supplies clock to various controllers
+within the Exynos4 SoC. The clock binding described here is applicable to all
+SoC's in the Exynos4 family.
+
+Required Properties:
+
+- comptible: should be one of the following.
+ - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
+ - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+
+ [Core Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ xxti 1
+ xusbxti 2
+ fin_pll 3
+ fout_apll 4
+ fout_mpll 5
+ fout_epll 6
+ fout_vpll 7
+ sclk_apll 8
+ sclk_mpll 9
+ sclk_epll 10
+ sclk_vpll 11
+ arm_clk 12
+ aclk200 13
+ aclk100 14
+ aclk160 15
+ aclk133 16
+ mout_mpll_user_t 17 Exynos4x12
+ mout_mpll_user_c 18 Exynos4x12
+ mout_core 19
+ mout_apll 20
+
+
+ [Clock Gate for Special Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ sclk_fimc0 128
+ sclk_fimc1 129
+ sclk_fimc2 130
+ sclk_fimc3 131
+ sclk_cam0 132
+ sclk_cam1 133
+ sclk_csis0 134
+ sclk_csis1 135
+ sclk_hdmi 136
+ sclk_mixer 137
+ sclk_dac 138
+ sclk_pixel 139
+ sclk_fimd0 140
+ sclk_mdnie0 141 Exynos4412
+ sclk_mdnie_pwm0 12 142 Exynos4412
+ sclk_mipi0 143
+ sclk_audio0 144
+ sclk_mmc0 145
+ sclk_mmc1 146
+ sclk_mmc2 147
+ sclk_mmc3 148
+ sclk_mmc4 149
+ sclk_sata 150 Exynos4210
+ sclk_uart0 151
+ sclk_uart1 152
+ sclk_uart2 153
+ sclk_uart3 154
+ sclk_uart4 155
+ sclk_audio1 156
+ sclk_audio2 157
+ sclk_spdif 158
+ sclk_spi0 159
+ sclk_spi1 160
+ sclk_spi2 161
+ sclk_slimbus 162
+ sclk_fimd1 163 Exynos4210
+ sclk_mipi1 164 Exynos4210
+ sclk_pcm1 165
+ sclk_pcm2 166
+ sclk_i2s1 167
+ sclk_i2s2 168
+ sclk_mipihsi 169 Exynos4412
+ sclk_mfc 170
+ sclk_pcm0 171
+ sclk_g3d 172
+ sclk_pwm_isp 173 Exynos4x12
+ sclk_spi0_isp 174 Exynos4x12
+ sclk_spi1_isp 175 Exynos4x12
+ sclk_uart_isp 176 Exynos4x12
+
+ [Peripheral Clock Gates]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ fimc0 256
+ fimc1 257
+ fimc2 258
+ fimc3 259
+ csis0 260
+ csis1 261
+ jpeg 262
+ smmu_fimc0 263
+ smmu_fimc1 264
+ smmu_fimc2 265
+ smmu_fimc3 266
+ smmu_jpeg 267
+ vp 268
+ mixer 269
+ tvenc 270 Exynos4210
+ hdmi 271
+ smmu_tv 272
+ mfc 273
+ smmu_mfcl 274
+ smmu_mfcr 275
+ g3d 276
+ g2d 277 Exynos4210
+ rotator 278 Exynos4210
+ mdma 279 Exynos4210
+ smmu_g2d 280 Exynos4210
+ smmu_rotator 281 Exynos4210
+ smmu_mdma 282 Exynos4210
+ fimd0 283
+ mie0 284
+ mdnie0 285 Exynos4412
+ dsim0 286
+ smmu_fimd0 287
+ fimd1 288 Exynos4210
+ mie1 289 Exynos4210
+ dsim1 290 Exynos4210
+ smmu_fimd1 291 Exynos4210
+ pdma0 292
+ pdma1 293
+ pcie_phy 294
+ sata_phy 295 Exynos4210
+ tsi 296
+ sdmmc0 297
+ sdmmc1 298
+ sdmmc2 299
+ sdmmc3 300
+ sdmmc4 301
+ sata 302 Exynos4210
+ sromc 303
+ usb_host 304
+ usb_device 305
+ pcie 306
+ onenand 307
+ nfcon 308
+ smmu_pcie 309
+ gps 310
+ smmu_gps 311
+ uart0 312
+ uart1 313
+ uart2 314
+ uart3 315
+ uart4 316
+ i2c0 317
+ i2c1 318
+ i2c2 319
+ i2c3 320
+ i2c4 321
+ i2c5 322
+ i2c6 323
+ i2c7 324
+ i2c_hdmi 325
+ tsadc 326
+ spi0 327
+ spi1 328
+ spi2 329
+ i2s1 330
+ i2s2 331
+ pcm0 332
+ i2s0 333
+ pcm1 334
+ pcm2 335
+ pwm 336
+ slimbus 337
+ spdif 338
+ ac97 339
+ modemif 340
+ chipid 341
+ sysreg 342
+ hdmi_cec 343
+ mct 344
+ wdt 345
+ rtc 346
+ keyif 347
+ audss 348
+ mipi_hsi 349 Exynos4210
+ mdma2 350 Exynos4210
+ pixelasyncm0 351
+ pixelasyncm1 352
+ fimc_lite0 353 Exynos4x12
+ fimc_lite1 354 Exynos4x12
+ ppmuispx 355 Exynos4x12
+ ppmuispmx 356 Exynos4x12
+ fimc_isp 357 Exynos4x12
+ fimc_drc 358 Exynos4x12
+ fimc_fd 359 Exynos4x12
+ mcuisp 360 Exynos4x12
+ gicisp 361 Exynos4x12
+ smmu_isp 362 Exynos4x12
+ smmu_drc 363 Exynos4x12
+ smmu_fd 364 Exynos4x12
+ smmu_lite0 365 Exynos4x12
+ smmu_lite1 366 Exynos4x12
+ mcuctl_isp 367 Exynos4x12
+ mpwm_isp 368 Exynos4x12
+ i2c0_isp 369 Exynos4x12
+ i2c1_isp 370 Exynos4x12
+ mtcadc_isp 371 Exynos4x12
+ pwm_isp 372 Exynos4x12
+ wdt_isp 373 Exynos4x12
+ uart_isp 374 Exynos4x12
+ asyncaxim 375 Exynos4x12
+ smmu_ispcx 376 Exynos4x12
+ spi0_isp 377 Exynos4x12
+ spi1_isp 378 Exynos4x12
+ pwm_isp_sclk 379 Exynos4x12
+ spi0_isp_sclk 380 Exynos4x12
+ spi1_isp_sclk 381 Exynos4x12
+ uart_isp_sclk 382 Exynos4x12
+
+ [Mux Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ mout_fimc0 384
+ mout_fimc1 385
+ mout_fimc2 386
+ mout_fimc3 387
+ mout_cam0 388
+ mout_cam1 389
+ mout_csis0 390
+ mout_csis1 391
+ mout_g3d0 392
+ mout_g3d1 393
+ mout_g3d 394
+ aclk400_mcuisp 395 Exynos4x12
+
+ [Div Clocks]
+
+ Clock ID SoC (if specific)
+ -----------------------------------------------
+
+ div_isp0 450 Exynos4x12
+ div_isp1 451 Exynos4x12
+ div_mcuisp0 452 Exynos4x12
+ div_mcuisp1 453 Exynos4x12
+ div_aclk200 454 Exynos4x12
+ div_aclk400_mcuisp 455 Exynos4x12
+
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10030000 {
+ compatible = "samsung,exynos4210-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
new file mode 100644
index 000000000000..781a6276adf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt
@@ -0,0 +1,177 @@
+* Samsung Exynos5250 Clock Controller
+
+The Exynos5250 clock controller generates and supplies clock to various
+controllers within the Exynos5250 SoC.
+
+Required Properties:
+
+- comptible: should be one of the following.
+ - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+ [Core Clocks]
+
+ Clock ID
+ ----------------------------
+
+ fin_pll 1
+
+ [Clock Gate for Special Clocks]
+
+ Clock ID
+ ----------------------------
+
+ sclk_cam_bayer 128
+ sclk_cam0 129
+ sclk_cam1 130
+ sclk_gscl_wa 131
+ sclk_gscl_wb 132
+ sclk_fimd1 133
+ sclk_mipi1 134
+ sclk_dp 135
+ sclk_hdmi 136
+ sclk_pixel 137
+ sclk_audio0 138
+ sclk_mmc0 139
+ sclk_mmc1 140
+ sclk_mmc2 141
+ sclk_mmc3 142
+ sclk_sata 143
+ sclk_usb3 144
+ sclk_jpeg 145
+ sclk_uart0 146
+ sclk_uart1 147
+ sclk_uart2 148
+ sclk_uart3 149
+ sclk_pwm 150
+ sclk_audio1 151
+ sclk_audio2 152
+ sclk_spdif 153
+ sclk_spi0 154
+ sclk_spi1 155
+ sclk_spi2 156
+
+
+ [Peripheral Clock Gates]
+
+ Clock ID
+ ----------------------------
+
+ gscl0 256
+ gscl1 257
+ gscl2 258
+ gscl3 259
+ gscl_wa 260
+ gscl_wb 261
+ smmu_gscl0 262
+ smmu_gscl1 263
+ smmu_gscl2 264
+ smmu_gscl3 265
+ mfc 266
+ smmu_mfcl 267
+ smmu_mfcr 268
+ rotator 269
+ jpeg 270
+ mdma1 271
+ smmu_rotator 272
+ smmu_jpeg 273
+ smmu_mdma1 274
+ pdma0 275
+ pdma1 276
+ sata 277
+ usbotg 278
+ mipi_hsi 279
+ sdmmc0 280
+ sdmmc1 281
+ sdmmc2 282
+ sdmmc3 283
+ sromc 284
+ usb2 285
+ usb3 286
+ sata_phyctrl 287
+ sata_phyi2c 288
+ uart0 289
+ uart1 290
+ uart2 291
+ uart3 292
+ uart4 293
+ i2c0 294
+ i2c1 295
+ i2c2 296
+ i2c3 297
+ i2c4 298
+ i2c5 299
+ i2c6 300
+ i2c7 301
+ i2c_hdmi 302
+ adc 303
+ spi0 304
+ spi1 305
+ spi2 306
+ i2s1 307
+ i2s2 308
+ pcm1 309
+ pcm2 310
+ pwm 311
+ spdif 312
+ ac97 313
+ hsi2c0 314
+ hsi2c1 315
+ hs12c2 316
+ hs12c3 317
+ chipid 318
+ sysreg 319
+ pmu 320
+ cmu_top 321
+ cmu_core 322
+ cmu_mem 323
+ tzpc0 324
+ tzpc1 325
+ tzpc2 326
+ tzpc3 327
+ tzpc4 328
+ tzpc5 329
+ tzpc6 330
+ tzpc7 331
+ tzpc8 332
+ tzpc9 333
+ hdmi_cec 334
+ mct 335
+ wdt 336
+ rtc 337
+ tmu 338
+ fimd1 339
+ mie1 340
+ dsim0 341
+ dp 342
+ mixer 343
+ hdmi 345
+
+Example 1: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5250-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
+Example 2: UART controller node that consumes the clock generated by the clock
+ controller. Refer to the standard clock bindings for information
+ about 'clocks' and 'clock-names' property.
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
+ };
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
new file mode 100644
index 000000000000..4499e9966bc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
@@ -0,0 +1,61 @@
+* Samsung Exynos5440 Clock Controller
+
+The Exynos5440 clock controller generates and supplies clock to various
+controllers within the Exynos5440 SoC.
+
+Required Properties:
+
+- comptible: should be "samsung,exynos5440-clock".
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume.
+
+
+ [Core Clocks]
+
+ Clock ID
+ ----------------------------
+
+ xtal 1
+ arm_clk 2
+
+ [Peripheral Clock Gates]
+
+ Clock ID
+ ----------------------------
+
+ spi_baud 16
+ pb0_250 17
+ pr0_250 18
+ pr1_250 19
+ b_250 20
+ b_125 21
+ b_200 22
+ sata 23
+ usb 24
+ gmac0 25
+ cs250 26
+ pb0_250_o 27
+ pr0_250_o 28
+ pr1_250_o 29
+ b_250_o 30
+ b_125_o 31
+ b_200_o 32
+ sata_o 33
+ usb_o 34
+ gmac0_o 35
+ cs250_o 36
+
+Example: An example of a clock controller node is listed below.
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5440-clock";
+ reg = <0x160000 0x10000>;
+ #clock-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
new file mode 100644
index 000000000000..d6cb083b90a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt
@@ -0,0 +1,303 @@
+NVIDIA Tegra114 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra114-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in", and the board-specific oscillator "osc".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the CAR.
+
+ The first 160 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ this case, those clocks are assigned IDs above 160 in order to highlight
+ this issue. Implementations that interpret these clock IDs as bit values
+ within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ explicitly handle these special cases.
+
+ The balance of the clocks controlled by the CAR are assigned IDs of 160 and
+ above.
+
+ 0 unassigned
+ 1 unassigned
+ 2 unassigned
+ 3 unassigned
+ 4 rtc
+ 5 timer
+ 6 uarta
+ 7 unassigned (register bit affects uartb and vfir)
+ 8 unassigned
+ 9 sdmmc2
+ 10 unassigned (register bit affects spdif_in and spdif_out)
+ 11 i2s1
+ 12 i2c1
+ 13 ndflash
+ 14 sdmmc1
+ 15 sdmmc4
+ 16 unassigned
+ 17 pwm
+ 18 i2s2
+ 19 epp
+ 20 unassigned (register bit affects vi and vi_sensor)
+ 21 2d
+ 22 usbd
+ 23 isp
+ 24 3d
+ 25 unassigned
+ 26 disp2
+ 27 disp1
+ 28 host1x
+ 29 vcp
+ 30 i2s0
+ 31 unassigned
+
+ 32 unassigned
+ 33 unassigned
+ 34 apbdma
+ 35 unassigned
+ 36 kbc
+ 37 unassigned
+ 38 unassigned
+ 39 unassigned (register bit affects fuse and fuse_burn)
+ 40 kfuse
+ 41 sbc1
+ 42 nor
+ 43 unassigned
+ 44 sbc2
+ 45 unassigned
+ 46 sbc3
+ 47 i2c5
+ 48 dsia
+ 49 unassigned
+ 50 mipi
+ 51 hdmi
+ 52 csi
+ 53 unassigned
+ 54 i2c2
+ 55 uartc
+ 56 mipi-cal
+ 57 emc
+ 58 usb2
+ 59 usb3
+ 60 msenc
+ 61 vde
+ 62 bsea
+ 63 bsev
+
+ 64 unassigned
+ 65 uartd
+ 66 unassigned
+ 67 i2c3
+ 68 sbc4
+ 69 sdmmc3
+ 70 unassigned
+ 71 owr
+ 72 afi
+ 73 csite
+ 74 unassigned
+ 75 unassigned
+ 76 la
+ 77 trace
+ 78 soc_therm
+ 79 dtv
+ 80 ndspeed
+ 81 i2cslow
+ 82 dsib
+ 83 tsec
+ 84 unassigned
+ 85 unassigned
+ 86 unassigned
+ 87 unassigned
+ 88 unassigned
+ 89 xusb_host
+ 90 unassigned
+ 91 msenc
+ 92 csus
+ 93 unassigned
+ 94 unassigned
+ 95 unassigned (bit affects xusb_dev and xusb_dev_src)
+
+ 96 unassigned
+ 97 unassigned
+ 98 unassigned
+ 99 mselect
+ 100 tsensor
+ 101 i2s3
+ 102 i2s4
+ 103 i2c4
+ 104 sbc5
+ 105 sbc6
+ 106 d_audio
+ 107 apbif
+ 108 dam0
+ 109 dam1
+ 110 dam2
+ 111 hda2codec_2x
+ 112 unassigned
+ 113 audio0_2x
+ 114 audio1_2x
+ 115 audio2_2x
+ 116 audio3_2x
+ 117 audio4_2x
+ 118 spdif_2x
+ 119 actmon
+ 120 extern1
+ 121 extern2
+ 122 extern3
+ 123 unassigned
+ 124 unassigned
+ 125 hda
+ 126 unassigned
+ 127 se
+
+ 128 hda2hdmi
+ 129 unassigned
+ 130 unassigned
+ 131 unassigned
+ 132 unassigned
+ 133 unassigned
+ 134 unassigned
+ 135 unassigned
+ 136 unassigned
+ 137 unassigned
+ 138 unassigned
+ 139 unassigned
+ 140 unassigned
+ 141 unassigned
+ 142 unassigned
+ 143 unassigned (bit affects xusb_falcon_src, xusb_fs_src,
+ xusb_host_src and xusb_ss_src)
+ 144 cilab
+ 145 cilcd
+ 146 cile
+ 147 dsialp
+ 148 dsiblp
+ 149 unassigned
+ 150 dds
+ 151 unassigned
+ 152 dp2
+ 153 amx
+ 154 adx
+ 155 unassigned (bit affects dfll_ref and dfll_soc)
+ 156 xusb_ss
+
+ 192 uartb
+ 193 vfir
+ 194 spdif_in
+ 195 spdif_out
+ 196 vi
+ 197 vi_sensor
+ 198 fuse
+ 199 fuse_burn
+ 200 clk_32k
+ 201 clk_m
+ 202 clk_m_div2
+ 203 clk_m_div4
+ 204 pll_ref
+ 205 pll_c
+ 206 pll_c_out1
+ 207 pll_c2
+ 208 pll_c3
+ 209 pll_m
+ 210 pll_m_out1
+ 211 pll_p
+ 212 pll_p_out1
+ 213 pll_p_out2
+ 214 pll_p_out3
+ 215 pll_p_out4
+ 216 pll_a
+ 217 pll_a_out0
+ 218 pll_d
+ 219 pll_d_out0
+ 220 pll_d2
+ 221 pll_d2_out0
+ 222 pll_u
+ 223 pll_u_480M
+ 224 pll_u_60M
+ 225 pll_u_48M
+ 226 pll_u_12M
+ 227 pll_x
+ 228 pll_x_out0
+ 229 pll_re_vco
+ 230 pll_re_out
+ 231 pll_e_out0
+ 232 spdif_in_sync
+ 233 i2s0_sync
+ 234 i2s1_sync
+ 235 i2s2_sync
+ 236 i2s3_sync
+ 237 i2s4_sync
+ 238 vimclk_sync
+ 239 audio0
+ 240 audio1
+ 241 audio2
+ 242 audio3
+ 243 audio4
+ 244 spdif
+ 245 clk_out_1
+ 246 clk_out_2
+ 247 clk_out_3
+ 248 blink
+ 252 xusb_host_src
+ 253 xusb_falcon_src
+ 254 xusb_fs_src
+ 255 xusb_ss_src
+ 256 xusb_dev_src
+ 257 xusb_dev
+ 258 xusb_hs_src
+ 259 sclk
+ 260 hclk
+ 261 pclk
+ 262 cclk_g
+ 263 cclk_lp
+ 264 dfll_ref
+ 265 dfll_soc
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra114-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car 58>; /* usb2 */
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: clock@0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <12000000>;
+ };
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k> <&osc>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
index 0921fac73528..e885680f6b45 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt
@@ -120,8 +120,8 @@ Required properties :
90 clk_d
91 unassigned
92 sus
- 93 cdev1
- 94 cdev2
+ 93 cdev2
+ 94 cdev1
95 unassigned
96 uart2
diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
deleted file mode 100644
index f4dc5233167e..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-VIA/Wondermedia VT8500 GPIO Controller
------------------------------------------------------
-
-Required properties:
-- compatible : "via,vt8500-gpio", "wm,wm8505-gpio"
- or "wm,wm8650-gpio" depending on your SoC
-- reg : Should contain 1 register range (address and length)
-- #gpio-cells : should be <3>.
- 1) bank
- 2) pin number
- 3) flags - should be 0
-
-Example:
-
- gpio: gpio-controller@d8110000 {
- compatible = "via,vt8500-gpio";
- gpio-controller;
- reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
- };
-
- vibrate {
- gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */
- };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
new file mode 100644
index 000000000000..c54c5a9a2a90
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
@@ -0,0 +1,53 @@
+Samsung S3C24XX Interrupt Controllers
+
+The S3C24XX SoCs contain a custom set of interrupt controllers providing a
+varying number of interrupt sources. The set consists of a main- and sub-
+controller and on newer SoCs even a second main controller.
+
+Required properties:
+- compatible: Compatible property value should be "samsung,s3c2410-irq"
+ for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later.
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 4 and interrupt descriptor shall
+ have the following format:
+ <ctrl_num parent_irq ctrl_irq type>
+
+ ctrl_num contains the controller to use:
+ - 0 ... main controller
+ - 1 ... sub controller
+ - 2 ... second main controller on s3c2416 and s3c2450
+ parent_irq contains the parent bit in the main controller and will be
+ ignored in main controllers
+ ctrl_irq contains the interrupt bit of the controller
+ type contains the trigger type to use
+
+Example:
+
+ interrupt-controller@4a000000 {
+ compatible = "samsung,s3c2410-irq";
+ reg = <0x4a000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells=<4>;
+ };
+
+ [...]
+
+ serial@50000000 {
+ compatible = "samsung,s3c2410-uart";
+ reg = <0x50000000 0x4000>;
+ interrupt-parent = <&subintc>;
+ interrupts = <1 28 0 4>, <1 28 1 4>;
+ };
+
+ rtc@57000000 {
+ compatible = "samsung,s3c2410-rtc";
+ reg = <0x57000000 0x100>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 30 0 3>, <0 8 0 3>;
+ };
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index 67ec3d4ccc7f..bf0182d8da25 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -21,3 +21,24 @@ Required properties:
- samsung,mfc-l : Base address of the second memory bank used by MFC
for DMA contiguous memory allocation and its size.
+
+Optional properties:
+ - samsung,power-domain : power-domain property defined with a phandle
+ to respective power domain.
+
+Example:
+SoC specific DT entry:
+
+mfc: codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 94 0>;
+ samsung,power-domain = <&pd_mfc>;
+};
+
+Board specific DT entry:
+
+codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
new file mode 100644
index 000000000000..420b3ab18890
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
@@ -0,0 +1,98 @@
+Device tree bindings for NOR flash connect to TI GPMC
+
+NOR flash connected to the TI GPMC (found on OMAP boards) are represented as
+child nodes of the GPMC controller with a name of "nor".
+
+All timing relevant properties as well as generic GPMC child properties are
+explained in a separate documents. Please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Required properties:
+- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and
+ 16-bit devices and so must be either 1 or 2 bytes.
+- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+- gpmc,cs-on-ns: Chip-select assertion time
+- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
+- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
+- gpmc,oe-on-ns: Output-enable assertion time
+- gpmc,oe-off-ns: Output-enable de-assertion time
+- gpmc,we-on-ns Write-enable assertion time
+- gpmc,we-off-ns: Write-enable de-assertion time
+- gpmc,access-ns: Start cycle to first data capture (read access)
+- gpmc,rd-cycle-ns: Total read cycle time
+- gpmc,wr-cycle-ns: Total write cycle time
+- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+- reg: Chip-select, base address (relative to chip-select)
+ and size of NOR flash. Note that base address will be
+ typically 0 as this is the start of the chip-select.
+
+Optional properties:
+- gpmc,XXX Additional GPMC timings and settings parameters. See
+ Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Optional properties for partiton table parsing:
+- #address-cells: should be set to 1
+- #size-cells: should be set to 1
+
+Example:
+
+gpmc: gpmc@6e000000 {
+ compatible = "ti,omap3430-gpmc", "simple-bus";
+ ti,hwmods = "gpmc";
+ reg = <0x6e000000 0x1000>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x10000000 0x08000000>;
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ linux,mtd-name= "intel,pf48f6000m0y1be";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0 0x08000000>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <186>;
+ gpmc,cs-wr-off-ns = <186>;
+ gpmc,adv-on-ns = <12>;
+ gpmc,adv-rd-off-ns = <48>;
+ gpmc,adv-wr-off-ns = <48>;
+ gpmc,oe-on-ns = <54>;
+ gpmc,oe-off-ns = <168>;
+ gpmc,we-on-ns = <54>;
+ gpmc,we-off-ns = <168>;
+ gpmc,rd-cycle-ns = <186>;
+ gpmc,wr-cycle-ns = <186>;
+ gpmc,access-ns = <114>;
+ gpmc,page-burst-access-ns = <6>;
+ gpmc,bus-turnaround-ns = <12>;
+ gpmc,cycle2cycle-delay-ns = <18>;
+ gpmc,wr-data-mux-bus-ns = <90>;
+ gpmc,wr-access-ns = <186>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ partition@0 {
+ label = "bootloader-nor";
+ reg = <0 0x40000>;
+ };
+ partition@0x40000 {
+ label = "params-nor";
+ reg = <0x40000 0x40000>;
+ };
+ partition@0x80000 {
+ label = "kernel-nor";
+ reg = <0x80000 0x200000>;
+ };
+ partition@0x280000 {
+ label = "filesystem-nor";
+ reg = <0x240000 0x7d80000>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
index deec9da224a2..b7529424ac88 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
@@ -10,6 +10,8 @@ Documentation/devicetree/bindings/bus/ti-gpmc.txt
Required properties:
- reg: The CS line the peripheral is connected to
+ - gpmc,device-width Width of the ONENAND device connected to the GPMC
+ in bytes. Must be 1 or 2.
Optional properties:
@@ -34,6 +36,7 @@ Example for an OMAP3430 board:
onenand@0 {
reg = <0 0 0>; /* CS0, offset 0 */
+ gpmc,device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/net/gpmc-eth.txt b/Documentation/devicetree/bindings/net/gpmc-eth.txt
new file mode 100644
index 000000000000..24cb4e46f675
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/gpmc-eth.txt
@@ -0,0 +1,97 @@
+Device tree bindings for Ethernet chip connected to TI GPMC
+
+Besides being used to interface with external memory devices, the
+General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices
+such as ethernet controllers to processors using the TI GPMC as a data bus.
+
+Ethernet controllers connected to TI GPMC are represented as child nodes of
+the GPMC controller with an "ethernet" name.
+
+All timing relevant properties as well as generic GPMC child properties are
+explained in a separate documents. Please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+For the properties relevant to the ethernet controller connected to the GPMC
+refer to the binding documentation of the device. For example, the documentation
+for the SMSC 911x is Documentation/devicetree/bindings/net/smsc911x.txt
+
+Child nodes need to specify the GPMC bus address width using the "bank-width"
+property but is possible that an ethernet controller also has a property to
+specify the I/O registers address width. Even when the GPMC has a maximum 16-bit
+address width, it supports devices with 32-bit word registers.
+For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an
+OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;".
+
+Required properties:
+- bank-width: Address width of the device in bytes. GPMC supports 8-bit
+ and 16-bit devices and so must be either 1 or 2 bytes.
+- compatible: Compatible string property for the ethernet child device.
+- gpmc,cs-on: Chip-select assertion time
+- gpmc,cs-rd-off: Chip-select de-assertion time for reads
+- gpmc,cs-wr-off: Chip-select de-assertion time for writes
+- gpmc,oe-on: Output-enable assertion time
+- gpmc,oe-off Output-enable de-assertion time
+- gpmc,we-on: Write-enable assertion time
+- gpmc,we-off: Write-enable de-assertion time
+- gpmc,access: Start cycle to first data capture (read access)
+- gpmc,rd-cycle: Total read cycle time
+- gpmc,wr-cycle: Total write cycle time
+- reg: Chip-select, base address (relative to chip-select)
+ and size of the memory mapped for the device.
+ Note that base address will be typically 0 as this
+ is the start of the chip-select.
+
+Optional properties:
+- gpmc,XXX Additional GPMC timings and settings parameters. See
+ Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Example:
+
+gpmc: gpmc@6e000000 {
+ compatible = "ti,omap3430-gpmc";
+ ti,hwmods = "gpmc";
+ reg = <0x6e000000 0x1000>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <5 0 0x2c000000 0x1000000>;
+
+ ethernet@5,0 {
+ compatible = "smsc,lan9221", "smsc,lan9115";
+ reg = <5 0 0xff>;
+ bank-width = <2>;
+
+ gpmc,mux-add-data;
+ gpmc,cs-on = <0>;
+ gpmc,cs-rd-off = <186>;
+ gpmc,cs-wr-off = <186>;
+ gpmc,adv-on = <12>;
+ gpmc,adv-rd-off = <48>;
+ gpmc,adv-wr-off = <48>;
+ gpmc,oe-on = <54>;
+ gpmc,oe-off = <168>;
+ gpmc,we-on = <54>;
+ gpmc,we-off = <168>;
+ gpmc,rd-cycle = <186>;
+ gpmc,wr-cycle = <186>;
+ gpmc,access = <114>;
+ gpmc,page-burst-access = <6>;
+ gpmc,bus-turnaround = <12>;
+ gpmc,cycle2cycle-delay = <18>;
+ gpmc,wr-data-mux-bus = <90>;
+ gpmc,wr-access = <186>;
+ gpmc,cycle2cycle-samecsen;
+ gpmc,cycle2cycle-diffcsen;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <16>;
+ vmmc-supply = <&vddvario>;
+ vmmc_aux-supply = <&vdd33a>;
+ reg-io-width = <4>;
+
+ smsc,save-mac-address;
+ };
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
new file mode 100644
index 000000000000..b3aa90f0ce44
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-vt8500.txt
@@ -0,0 +1,57 @@
+VIA VT8500 and Wondermedia WM8xxx-series pinmux/gpio controller
+
+These SoCs contain a combined Pinmux/GPIO module. Each pin may operate as
+either a GPIO in, GPIO out or as an alternate function (I2C, SPI etc).
+
+Required properties:
+- compatible: "via,vt8500-pinctrl", "wm,wm8505-pinctrl", "wm,wm8650-pinctrl",
+ "wm8750-pinctrl" or "wm,wm8850-pinctrl"
+- reg: Should contain the physical address of the module's registers.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells: Should be two.
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells : Should be two. The first cell is the pin number and the
+ second cell is used to specify optional parameters.
+ bit 0 - active low
+
+Please refer to ../gpio/gpio.txt for a general description of GPIO bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Each pin configuration node lists the pin(s) to which it applies, and one or
+more of the mux functions to select on those pin(s), and pull-up/down
+configuration. Each subnode only affects those parameters that are explicitly
+listed. In other words, a subnode that lists only a mux function implies no
+information about any pull configuration. Similarly, a subnode that lists only
+a pull parameter implies no information about the mux function.
+
+Required subnode-properties:
+- wm,pins: An array of cells. Each cell contains the ID of a pin.
+
+Optional subnode-properties:
+- wm,function: Integer, containing the function to mux to the pin(s):
+ 0: GPIO in
+ 1: GPIO out
+ 2: alternate
+
+- wm,pull: Integer, representing the pull-down/up to apply to the pin(s):
+ 0: none
+ 1: down
+ 2: up
+
+Each of wm,function and wm,pull may contain either a single value which
+will be applied to all pins in wm,pins, or one value for each entry in
+wm,pins.
+
+Example:
+
+ pinctrl: pinctrl {
+ compatible = "wm,wm8505-pinctrl";
+ reg = <0xD8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/reset/reset.txt b/Documentation/devicetree/bindings/reset/reset.txt
new file mode 100644
index 000000000000..31db6ff84908
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/reset.txt
@@ -0,0 +1,75 @@
+= Reset Signal Device Tree Bindings =
+
+This binding is intended to represent the hardware reset signals present
+internally in most IC (SoC, FPGA, ...) designs. Reset signals for whole
+standalone chips are most likely better represented as GPIOs, although there
+are likely to be exceptions to this rule.
+
+Hardware blocks typically receive a reset signal. This signal is generated by
+a reset provider (e.g. power management or clock module) and received by a
+reset consumer (the module being reset, or a module managing when a sub-
+ordinate module is reset). This binding exists to represent the provider and
+consumer, and provide a way to couple the two together.
+
+A reset signal is represented by the phandle of the provider, plus a reset
+specifier - a list of DT cells that represents the reset signal within the
+provider. The length (number of cells) and semantics of the reset specifier
+are dictated by the binding of the reset provider, although common schemes
+are described below.
+
+A word on where to place reset signal consumers in device tree: It is possible
+in hardware for a reset signal to affect multiple logically separate HW blocks
+at once. In this case, it would be unwise to represent this reset signal in
+the DT node of each affected HW block, since if activated, an unrelated block
+may be reset. Instead, reset signals should be represented in the DT node
+where it makes most sense to control it; this may be a bus node if all
+children of the bus are affected by the reset signal, or an individual HW
+block node for dedicated reset signals. The intent of this binding is to give
+appropriate software access to the reset signals in order to manage the HW,
+rather than to slavishly enumerate the reset signal that affects each HW
+block.
+
+= Reset providers =
+
+Required properties:
+#reset-cells: Number of cells in a reset specifier; Typically 0 for nodes
+ with a single reset output and 1 for nodes with multiple
+ reset outputs.
+
+For example:
+
+ rst: reset-controller {
+ #reset-cells = <1>;
+ };
+
+= Reset consumers =
+
+Required properties:
+resets: List of phandle and reset specifier pairs, one pair
+ for each reset signal that affects the device, or that the
+ device manages. Note: if the reset provider specifies '0' for
+ #reset-cells, then only the phandle portion of the pair will
+ appear.
+
+Optional properties:
+reset-names: List of reset signal name strings sorted in the same order as
+ the resets property. Consumers drivers will use reset-names to
+ match reset signal names with reset specifiers.
+
+For example:
+
+ device {
+ resets = <&rst 20>;
+ reset-names = "reset";
+ };
+
+This represents a device with a single reset signal named "reset".
+
+ bus {
+ resets = <&rst 10> <&rst 11> <&rst 12> <&rst 11>;
+ reset-names = "i2s1", "i2s2", "dma", "mixer";
+ };
+
+This represents a bus that controls the reset signal of each of four sub-
+ordinate devices. Consider for example a bus that fails to operate unless no
+child device has reset asserted.
diff --git a/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
new file mode 100644
index 000000000000..993695c659e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/cadence,ttc-timer.txt
@@ -0,0 +1,17 @@
+Cadence TTC - Triple Timer Counter
+
+Required properties:
+- compatible : Should be "cdns,ttc".
+- reg : Specifies base physical address and size of the registers.
+- interrupts : A list of 3 interrupts; one per timer channel.
+- clocks: phandle to the source clock
+
+Example:
+
+ttc0: ttc0@f8001000 {
+ interrupt-parent = <&intc>;
+ interrupts = < 0 10 4 0 11 4 0 12 4 >;
+ compatible = "cdns,ttc";
+ reg = <0xF8001000 0x1000>;
+ clocks = <&cpu_clk 3>;
+};
diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
new file mode 100644
index 000000000000..cb47bfbcaeea
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt
@@ -0,0 +1,68 @@
+Samsung's Multi Core Timer (MCT)
+
+The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
+global timer and CPU local timers. The global timer is a 64-bit free running
+up-counter and can generate 4 interrupts when the counter reaches one of the
+four preset counter values. The CPU local timers are 32-bit free running
+down-counters and generate an interrupt when the counter expires. There is
+one CPU local timer instantiated in MCT for every CPU in the system.
+
+Required properties:
+
+- compatible: should be "samsung,exynos4210-mct".
+ (a) "samsung,exynos4210-mct", for mct compatible with Exynos4210 mct.
+ (b) "samsung,exynos4412-mct", for mct compatible with Exynos4412 mct.
+
+- reg: base address of the mct controller and length of the address space
+ it occupies.
+
+- interrupts: the list of interrupts generated by the controller. The following
+ should be the order of the interrupts specified. The local timer interrupts
+ should be specified after the four global timer interrupts have been
+ specified.
+
+ 0: Global Timer Interrupt 0
+ 1: Global Timer Interrupt 1
+ 2: Global Timer Interrupt 2
+ 3: Global Timer Interrupt 3
+ 4: Local Timer Interrupt 0
+ 5: Local Timer Interrupt 1
+ 6: ..
+ 7: ..
+ i: Local Timer Interrupt n
+
+Example 1: In this example, the system uses only the first global timer
+ interrupt generated by MCT and the remaining three global timer
+ interrupts are unused. Two local timer interrupts have been
+ specified.
+
+ mct@10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>,
+ <0 42 0>, <0 48 0>;
+ };
+
+Example 2: In this example, the MCT global and local timer interrupts are
+ connected to two seperate interrupt controllers. Hence, an
+ interrupt-map is created to map the interrupts to the respective
+ interrupt controllers.
+
+ mct@101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
new file mode 100644
index 000000000000..f66fcddba46f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -0,0 +1,40 @@
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+ EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+
+Optional properties:
+ - samsung,vbus-gpio: if present, specifies the GPIO that
+ needs to be pulled up for the bus to be powered.
+
+Example:
+
+ usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+ samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+ };
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+ OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+
+Example:
+ usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+ };
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 62079d434581..1e31dac36a5f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -689,12 +689,15 @@ config ARCH_SA1100
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ARCH_HAS_CPUFREQ
- select ARCH_USES_GETTIMEOFFSET
+ select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select HAVE_S3C_RTC if RTC_CLASS
+ select MULTI_IRQ_HANDLER
select NEED_MACH_GPIO_H
select NEED_MACH_IO_H
help
@@ -707,10 +710,11 @@ config ARCH_S3C64XX
bool "Samsung S3C64XX"
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
- select ARCH_USES_GETTIMEOFFSET
select ARM_VIC
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_V6
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -744,9 +748,11 @@ config ARCH_S5P64X0
config ARCH_S5PC100
bool "Samsung S5PC100"
- select ARCH_USES_GETTIMEOFFSET
+ select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_V7
+ select GENERIC_CLOCKEVENTS
select HAVE_CLK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -779,6 +785,7 @@ config ARCH_EXYNOS
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
+ select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_CLK
@@ -1552,7 +1559,8 @@ config ARCH_NR_GPIO
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
default 512 if SOC_OMAP5
default 392 if ARCH_U8500
- default 288 if ARCH_VT8500 || ARCH_SUNXI
+ default 352 if ARCH_VT8500
+ default 288 if ARCH_SUNXI
default 264 if MACH_H4700
default 0
help
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 20358fb43450..55196639211d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -49,7 +49,10 @@ dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
+ exynos4412-odroidx.dtb \
exynos4412-smdk4412.dtb \
+ exynos4412-origen.dtb \
+ exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5440-ssdk5440.dtb
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index 46c098017036..62eceb4f0d3f 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -24,6 +24,144 @@
samsung,i2c-max-bus-freq = <378000>;
gpios = <&gpb3 0 2 3 0>,
<&gpb3 1 2 3 0>;
+
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.8V_LDO_OUT2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.35V_BUCK_OUT6";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "P2.0V_BUCK_OUT7";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "P2.85V_BUCK_OUT8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+ };
+ };
};
i2c@12C70000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 1a62bcf18aa3..9ac47d51c407 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -86,6 +86,8 @@
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
interrupts = <0 43 0>;
+ clocks = <&clock 345>;
+ clock-names = "watchdog";
status = "disabled";
};
@@ -93,6 +95,8 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupts = <0 44 0>, <0 45 0>;
+ clocks = <&clock 346>;
+ clock-names = "rtc";
status = "disabled";
};
@@ -100,6 +104,8 @@
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
interrupts = <0 109 0>;
+ clocks = <&clock 347>;
+ clock-names = "keypad";
status = "disabled";
};
@@ -107,6 +113,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
interrupts = <0 73 0>;
+ clocks = <&clock 297>, <&clock 145>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -114,6 +122,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
interrupts = <0 74 0>;
+ clocks = <&clock 298>, <&clock 146>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -121,6 +131,8 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
interrupts = <0 75 0>;
+ clocks = <&clock 299>, <&clock 147>;
+ clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
};
@@ -128,6 +140,16 @@
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
interrupts = <0 76 0>;
+ clocks = <&clock 300>, <&clock 148>;
+ clock-names = "hsmmc", "mmc_busclk.2";
+ status = "disabled";
+ };
+
+ mfc: codec@13400000 {
+ compatible = "samsung,mfc-v5";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 94 0>;
+ samsung,power-domain = <&pd_mfc>;
status = "disabled";
};
@@ -135,6 +157,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
interrupts = <0 52 0>;
+ clocks = <&clock 312>, <&clock 151>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -142,6 +166,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
interrupts = <0 53 0>;
+ clocks = <&clock 313>, <&clock 152>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -149,6 +175,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
interrupts = <0 54 0>;
+ clocks = <&clock 314>, <&clock 153>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -156,6 +184,8 @@
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
interrupts = <0 55 0>;
+ clocks = <&clock 315>, <&clock 154>;
+ clock-names = "uart", "clk_uart_baud0";
status = "disabled";
};
@@ -165,6 +195,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
interrupts = <0 58 0>;
+ clocks = <&clock 317>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -174,6 +206,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
interrupts = <0 59 0>;
+ clocks = <&clock 318>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -183,6 +217,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
interrupts = <0 60 0>;
+ clocks = <&clock 319>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -192,6 +228,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
interrupts = <0 61 0>;
+ clocks = <&clock 320>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -201,6 +239,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
interrupts = <0 62 0>;
+ clocks = <&clock 321>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -210,6 +250,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
interrupts = <0 63 0>;
+ clocks = <&clock 322>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -219,6 +261,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
interrupts = <0 64 0>;
+ clocks = <&clock 323>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -228,6 +272,8 @@
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
interrupts = <0 65 0>;
+ clocks = <&clock 324>;
+ clock-names = "i2c";
status = "disabled";
};
@@ -239,6 +285,8 @@
rx-dma-channel = <&pdma0 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 327>, <&clock 159>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -250,6 +298,8 @@
rx-dma-channel = <&pdma1 6>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 328>, <&clock 160>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -261,6 +311,8 @@
rx-dma-channel = <&pdma0 8>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 329>, <&clock 161>;
+ clock-names = "spi", "spi_busclk0";
status = "disabled";
};
@@ -275,6 +327,8 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 292>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
@@ -284,6 +338,8 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
+ clocks = <&clock 293>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
@@ -293,6 +349,8 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
+ clocks = <&clock 279>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index f2710018e84e..1b30bc8e2654 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -57,6 +57,12 @@
status = "okay";
};
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
@@ -121,4 +127,16 @@
linux,default-trigger = "heartbeat";
};
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index f63490707f3a..f52c86e2d424 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -43,6 +43,12 @@
status = "okay";
};
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
@@ -189,4 +195,16 @@
};
};
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <12000000>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index c346b64dff55..9a14484c7bb1 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -289,4 +289,16 @@
};
};
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 2feffc70814c..15143bdbafb8 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -47,6 +47,42 @@
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
};
+ mct@10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ clocks = <&clock 3>, <&clock 344>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &gic 0 57 0>,
+ <0x1 0 &gic 0 69 0>,
+ <0x2 0 &combiner 12 6>,
+ <0x3 0 &combiner 12 7>,
+ <0x4 0 &gic 0 42 0>,
+ <0x5 0 &gic 0 48 0>;
+ };
+ };
+
+ clock: clock-controller@0x10030000 {
+ compatible = "samsung,exynos4210-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <2 2>, <3 2>;
+ };
+
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index c6ae2005961f..36d4299789ef 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -25,4 +25,26 @@
gic:interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
+
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &gic 0 57 0>,
+ <0x1 0 &combiner 12 5>,
+ <0x2 0 &combiner 12 6>,
+ <0x3 0 &combiner 12 7>,
+ <0x4 0 &gic 1 12 0>,
+ <0x5 0 &gic 1 12 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
new file mode 100644
index 000000000000..53bc8bf77984
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -0,0 +1,111 @@
+/*
+ * Hardkernel's Exynos4412 based ODROID-X board device tree source
+ *
+ * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com>
+ *
+ * Device tree source file for Hardkernel's ODROID-X board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+ model = "Hardkernel ODROID-X board based on Exynos4412";
+ compatible = "hardkernel,odroid-x", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "led1:heart";
+ gpios = <&gpc1 0 1>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led2 {
+ label = "led2:mmc0";
+ gpios = <&gpc1 2 1>;
+ default-state = "on";
+ linux,default-trigger = "mmc0";
+ };
+ };
+
+ mshc@12550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ regulator_p3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "p3v3_en";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpa1 1 1>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ rtc@10070000 {
+ status = "okay";
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
new file mode 100644
index 000000000000..1fecf7666dc0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -0,0 +1,432 @@
+/*
+ * Insignal's Exynos4412 based Origen board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+ model = "Insignal Origen evaluation board based on Exynos4412";
+ compatible = "insignal,origen4412", "samsung,exynos4412";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs ="console=ttySAC2,115200";
+ };
+
+ mmc_reg: voltage-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 0>;
+ enable-active-high;
+ };
+
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ vmmc-supply = <&mmc_reg>;
+ status = "okay";
+ };
+
+ mshc@12550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ i2c@13860000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ pinctrl-0 = <&i2c0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
+ <&gpx2 4 0>,
+ <&gpx2 5 0>;
+
+ s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
+ <&gpm3 6 0>,
+ <&gpm3 7 0>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1100000>, <1100000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_M12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDDIOAP_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDDQ_PRE";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD18_2M";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD10_MPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD10_XPLL";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD10_MIPI";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD33_LCD";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD18_MIPI";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD18_ABB1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD33_UOTG";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDIOPERI_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB02";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_USH";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDIOAP_MMC012_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDDIOPERI_28";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "DVDD25";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "VDD28_CAM";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "VDD28_AF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "VDDA28_2M";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "VDD28_TF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "VDD33_A31";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "VDD18_CAM";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "VDD18_A31";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "GPS_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "DVDD12";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_m12";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd12_5m";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vddf28_emmc";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>; /* Normal Mode */
+ };
+ };
+ };
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index f05bf575cc45..874beeaef99d 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -27,6 +27,19 @@
bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
};
+ sdhci@12530000 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ codec@13400000 {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
@@ -42,4 +55,16 @@
serial@13830000 {
status = "okay";
};
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index d7dfe312772a..d75c047e80a9 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -25,4 +25,30 @@
gic:interrupt-controller@10490000 {
cpu-offset = <0x4000>;
};
+
+ mct@10050000 {
+ compatible = "samsung,exynos4412-mct";
+ reg = <0x10050000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>, <6 0>, <7 0>;
+ clocks = <&clock 3>, <&clock 344>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &gic 0 57 0>,
+ <0x1 0 &combiner 12 5>,
+ <0x2 0 &combiner 12 6>,
+ <0x3 0 &combiner 12 7>,
+ <0x4 0 &gic 1 12 0>,
+ <0x5 0 &gic 1 12 0>,
+ <0x6 0 &gic 1 12 0>,
+ <0x7 0 &gic 1 12 0>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 9a8780694909..7496b8d633ea 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -36,6 +36,12 @@
<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
};
+ clock: clock-controller@0x10030000 {
+ compatible = "samsung,exynos4412-clock";
+ reg = <0x10030000 0x20000>;
+ #clock-cells = <1>;
+ };
+
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11400000 0x1000>;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
new file mode 100644
index 000000000000..5de019cb0e58
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -0,0 +1,129 @@
+/*
+ * Samsung's Exynos5250 based Arndale board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+ model = "Insignal Arndale evaluation board based on EXYNOS5250";
+ compatible = "insignal,arndale", "samsung,exynos5250";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC2,115200";
+ };
+
+ i2c@12C60000 {
+ status = "disabled";
+ };
+
+ i2c@12C70000 {
+ status = "disabled";
+ };
+
+ i2c@12C80000 {
+ status = "disabled";
+ };
+
+ i2c@12C90000 {
+ status = "disabled";
+ };
+
+ i2c@12CA0000 {
+ status = "disabled";
+ };
+
+ i2c@12CB0000 {
+ status = "disabled";
+ };
+
+ i2c@12CC0000 {
+ status = "disabled";
+ };
+
+ i2c@12CD0000 {
+ status = "disabled";
+ };
+
+ i2c@121D0000 {
+ status = "disabled";
+ };
+
+ dwmmc_0: dwmmc0@12200000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+ <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+ <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>,
+ <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+ <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>;
+ };
+ };
+
+ dwmmc_1: dwmmc1@12210000 {
+ status = "disabled";
+ };
+
+ dwmmc_2: dwmmc2@12220000 {
+ num-slots = <1>;
+ supports-highspeed;
+ fifo-depth = <0x80>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+ gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+ <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+ <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+ };
+ };
+
+ dwmmc_3: dwmmc3@12230000 {
+ status = "disabled";
+ };
+
+ spi_0: spi@12d20000 {
+ status = "disabled";
+ };
+
+ spi_1: spi@12d30000 {
+ status = "disabled";
+ };
+
+ spi_2: spi@12d40000 {
+ status = "disabled";
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 1b8d4106d338..872ae1f93c75 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -231,4 +231,24 @@
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&wm8994>;
};
+
+ usb@12110000 {
+ samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+ };
+
+ dp-controller {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 17dd951c1cd2..babd9f9b1bf9 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -40,4 +40,15 @@
<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
};
};
+
+ usb@12110000 {
+ samsung,vbus-gpio = <&gpx1 1 1 3 3>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index b1ac73e21c80..28758e5dd15c 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -46,6 +46,22 @@
i2c8 = &i2c_8;
};
+ pd_gsc: gsc-power-domain@0x10044000 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044000 0x20>;
+ };
+
+ pd_mfc: mfc-power-domain@0x10044040 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044040 0x20>;
+ };
+
+ clock: clock-controller@0x10010000 {
+ compatible = "samsung,exynos5250-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
gic:interrupt-controller@10481000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
@@ -69,58 +85,106 @@
<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
};
+ mct@101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
+ #interrups-cells = <2>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ clocks = <&clock 1>, <&clock 335>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x1 0 &combiner 23 4>,
+ <0x2 0 &combiner 25 2>,
+ <0x3 0 &combiner 25 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <1 2>, <22 4>;
+ };
+
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x101D0000 0x100>;
interrupts = <0 42 0>;
+ clocks = <&clock 336>;
+ clock-names = "watchdog";
};
codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
+ samsung,power-domain = <&pd_mfc>;
};
rtc {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
interrupts = <0 43 0>, <0 44 0>;
+ clocks = <&clock 337>;
+ clock-names = "rtc";
+ status = "disabled";
};
tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
+ clocks = <&clock 338>;
+ clock-names = "tmu_apbif";
};
serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
interrupts = <0 51 0>;
+ clocks = <&clock 289>, <&clock 146>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
interrupts = <0 52 0>;
+ clocks = <&clock 290>, <&clock 147>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
interrupts = <0 53 0>;
+ clocks = <&clock 291>, <&clock 148>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@12C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
interrupts = <0 54 0>;
+ clocks = <&clock 292>, <&clock 149>;
+ clock-names = "uart", "clk_uart_baud0";
};
sata@122F0000 {
compatible = "samsung,exynos5-sata-ahci";
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
+ clocks = <&clock 277>, <&clock 143>;
+ clock-names = "sata", "sclk_sata";
};
sata-phy@12170000 {
@@ -134,6 +198,8 @@
interrupts = <0 56 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 294>;
+ clock-names = "i2c";
};
i2c_1: i2c@12C70000 {
@@ -142,6 +208,8 @@
interrupts = <0 57 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 295>;
+ clock-names = "i2c";
};
i2c_2: i2c@12C80000 {
@@ -150,6 +218,8 @@
interrupts = <0 58 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 296>;
+ clock-names = "i2c";
};
i2c_3: i2c@12C90000 {
@@ -158,6 +228,8 @@
interrupts = <0 59 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 297>;
+ clock-names = "i2c";
};
i2c_4: i2c@12CA0000 {
@@ -166,6 +238,8 @@
interrupts = <0 60 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 298>;
+ clock-names = "i2c";
};
i2c_5: i2c@12CB0000 {
@@ -174,6 +248,8 @@
interrupts = <0 61 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 299>;
+ clock-names = "i2c";
};
i2c_6: i2c@12CC0000 {
@@ -182,6 +258,8 @@
interrupts = <0 62 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 300>;
+ clock-names = "i2c";
};
i2c_7: i2c@12CD0000 {
@@ -190,6 +268,8 @@
interrupts = <0 63 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 301>;
+ clock-names = "i2c";
};
i2c_8: i2c@12CE0000 {
@@ -198,6 +278,8 @@
interrupts = <0 64 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 302>;
+ clock-names = "i2c";
};
i2c@121D0000 {
@@ -205,6 +287,8 @@
reg = <0x121D0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 288>;
+ clock-names = "i2c";
};
spi_0: spi@12d20000 {
@@ -216,6 +300,8 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 304>, <&clock 154>;
+ clock-names = "spi", "spi_busclk0";
};
spi_1: spi@12d30000 {
@@ -227,6 +313,8 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 305>, <&clock 155>;
+ clock-names = "spi", "spi_busclk0";
};
spi_2: spi@12d40000 {
@@ -238,6 +326,8 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 306>, <&clock 156>;
+ clock-names = "spi", "spi_busclk0";
};
dwmmc_0: dwmmc0@12200000 {
@@ -246,6 +336,8 @@
interrupts = <0 75 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 280>, <&clock 139>;
+ clock-names = "biu", "ciu";
};
dwmmc_1: dwmmc1@12210000 {
@@ -254,6 +346,8 @@
interrupts = <0 76 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 281>, <&clock 140>;
+ clock-names = "biu", "ciu";
};
dwmmc_2: dwmmc2@12220000 {
@@ -262,6 +356,8 @@
interrupts = <0 77 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 282>, <&clock 141>;
+ clock-names = "biu", "ciu";
};
dwmmc_3: dwmmc3@12230000 {
@@ -270,6 +366,8 @@
interrupts = <0 78 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 283>, <&clock 142>;
+ clock-names = "biu", "ciu";
};
i2s0: i2s@03830000 {
@@ -301,6 +399,18 @@
dma-names = "tx", "rx";
};
+ usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+ };
+
+ usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+ };
+
amba {
#address-cells = <1>;
#size-cells = <1>;
@@ -312,6 +422,8 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
+ clocks = <&clock 275>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
@@ -321,6 +433,8 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 276>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
@@ -330,6 +444,8 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
+ clocks = <&clock 271>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
@@ -339,6 +455,8 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
+ clocks = <&clock 271>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
@@ -592,34 +710,51 @@
};
};
+
gsc_0: gsc@0x13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 256>;
+ clock-names = "gscl";
};
gsc_1: gsc@0x13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 257>;
+ clock-names = "gscl";
};
gsc_2: gsc@0x13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 258>;
+ clock-names = "gscl";
};
gsc_3: gsc@0x13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
+ samsung,power-domain = <&pd_gsc>;
+ clocks = <&clock 259>;
+ clock-names = "gscl";
};
hdmi {
compatible = "samsung,exynos5-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
+ clocks = <&clock 333>, <&clock 136>, <&clock 137>,
+ <&clock 333>, <&clock 333>;
+ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+ "sclk_hdmiphy", "hdmiphy";
};
mixer {
@@ -627,4 +762,18 @@
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
};
+
+ dp-controller {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145b0000 0x1000>;
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dptx-phy {
+ reg = <0x10040720>;
+ samsung,enable-mask = <1>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index 81e2c964a900..a21eb4cbe893 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -28,19 +28,10 @@
status = "disabled";
};
- i2c@F0000 {
- status = "disabled";
- };
-
- i2c@100000 {
- status = "disabled";
- };
-
- watchdog {
- status = "disabled";
- };
-
- rtc {
- status = "disabled";
+ fixed-rate-clocks {
+ xtal {
+ compatible = "samsung,clock-xtal";
+ clock-frequency = <50000000>;
+ };
};
};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 9a99755920c0..48cc96aa0b5f 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -16,6 +16,12 @@
interrupt-parent = <&gic>;
+ clock: clock-controller@0x160000 {
+ compatible = "samsung,exynos5440-clock";
+ reg = <0x160000 0x1000>;
+ #clock-cells = <1>;
+ };
+
gic:interrupt-controller@2E0000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
@@ -24,55 +30,51 @@
};
cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
cpu@0 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <0>;
};
cpu@1 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <1>;
};
cpu@2 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <2>;
};
cpu@3 {
compatible = "arm,cortex-a15";
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 14 0xf08>;
- clock-frequency = <1000000>;
- };
+ reg = <3>;
};
};
- common {
- compatible = "samsung,exynos5440";
-
+ timer {
+ compatible = "arm,cortex-a15-timer",
+ "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ clock-frequency = <50000000>;
};
serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
interrupts = <0 2 0>;
+ clocks = <&clock 21>, <&clock 21>;
+ clock-names = "uart", "clk_uart_baud0";
};
serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
interrupts = <0 3 0>;
+ clocks = <&clock 21>, <&clock 21>;
+ clock-names = "uart", "clk_uart_baud0";
};
spi {
@@ -83,6 +85,8 @@
rx-dma-channel = <&pdma0 4>; /* preliminary */
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 21>, <&clock 16>;
+ clock-names = "spi", "spi_busclk0";
};
pinctrl {
@@ -110,25 +114,31 @@
};
i2c@F0000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
interrupts = <0 5 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 21>;
+ clock-names = "i2c";
};
i2c@100000 {
- compatible = "samsung,s3c2440-i2c";
+ compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
interrupts = <0 6 0>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&clock 21>;
+ clock-names = "i2c";
};
watchdog {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
interrupts = <0 1 0>;
+ clocks = <&clock 21>;
+ clock-names = "watchdog";
};
amba {
@@ -142,6 +152,8 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 34 0>;
+ clocks = <&clock 21>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
@@ -151,6 +163,8 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 35 0>;
+ clocks = <&clock 21>;
+ clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
@@ -161,5 +175,8 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
interrupts = <0 17 0>, <0 16 0>;
+ clocks = <&clock 21>;
+ clock-names = "rtc";
+ status = "disabled";
};
};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index f624dc85d441..02d23f15fd86 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -38,6 +38,57 @@
};
};
+ /* HS USB Port 2 RESET */
+ hsusb2_reset: hsusb2_reset_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_reset";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 19 0>; /* gpio_147 */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ /* HS USB Port 2 Power */
+ hsusb2_power: hsusb2_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb2_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 0>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 2 */
+ hsusb2_phy: hsusb2_phy {
+ compatible = "usb-nop-xceiv";
+ reset-supply = <&hsusb2_reset>;
+ vcc-supply = <&hsusb2_power>;
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb2_pins
+ >;
+
+ hsusbb2_pins: pinmux_hsusbb2_pins {
+ pinctrl-single,pins = <
+ 0x5c0 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_clk OUTPUT */
+ 0x5c2 0x3 /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_stp OUTPUT */
+ 0x5c4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dir INPUT | PULLDOWN */
+ 0x5c6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_nxt INPUT | PULLDOWN */
+ 0x5c8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat0 INPUT | PULLDOWN */
+ 0x5cA 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat1 INPUT | PULLDOWN */
+ 0x1a4 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat2 INPUT | PULLDOWN */
+ 0x1a6 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat3 INPUT | PULLDOWN */
+ 0x1a8 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat4 INPUT | PULLDOWN */
+ 0x1aa 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat5 INPUT | PULLDOWN */
+ 0x1ac 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat6 INPUT | PULLDOWN */
+ 0x1ae 0x10b /* USBB2_ULPITLL_CLK_MUXMODE.usbb1_ulpiphy_dat7 INPUT | PULLDOWN */
+ >;
+ };
};
&i2c1 {
@@ -65,3 +116,23 @@
&mmc3 {
status = "disabled";
};
+
+&usbhshost {
+ port2-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <0 &hsusb2_phy>;
+};
+
+&twl_gpio {
+ ti,use-leds;
+ /* pullups: BIT(1) */
+ ti,pullups = <0x000002>;
+ /*
+ * pulldowns:
+ * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <0x03a1c4>;
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1acc26148ffc..a14f74bbce7c 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -397,5 +397,36 @@
ti,timer-alwon;
ti,timer-secure;
};
+
+ usbhstll: usbhstll@48062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x48062000 0x1000>;
+ interrupts = <78>;
+ ti,hwmods = "usb_tll_hs";
+ };
+
+ usbhshost: usbhshost@48064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x48064000 0x400>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@48064400 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x48064400 0x400>;
+ interrupt-parent = <&intc>;
+ interrupts = <76>;
+ };
+
+ usbhsehci: ehci@48064800 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x48064800 0x400>;
+ interrupt-parent = <&intc>;
+ interrupts = <77>;
+ };
+ };
+
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 739bb79e410e..b7db1a2b6ca7 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -529,5 +529,35 @@
ti,hwmods = "timer11";
ti,timer-pwm;
};
+
+ usbhstll: usbhstll@4a062000 {
+ compatible = "ti,usbhs-tll";
+ reg = <0x4a062000 0x1000>;
+ interrupts = <0 78 0x4>;
+ ti,hwmods = "usb_tll_hs";
+ };
+
+ usbhshost: usbhshost@4a064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x4a064000 0x800>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@4a064800 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x4a064800 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 76 0x4>;
+ };
+
+ usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x4a064c00 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 0x4>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 6ebc1b704190..616990dc92db 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -12,7 +12,6 @@
serial@70006300 {
status = "okay";
- clock-frequency = <408000000>;
};
pmc {
diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts
index 5deb8692b350..6bbc8efae9c0 100644
--- a/arch/arm/boot/dts/tegra114-pluto.dts
+++ b/arch/arm/boot/dts/tegra114-pluto.dts
@@ -12,7 +12,6 @@
serial@70006300 {
status = "okay";
- clock-frequency = <408000000>;
};
pmc {
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index c0b527d15fda..c1110a9b2a91 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -24,10 +24,11 @@
0 42 0x04
0 121 0x04
0 122 0x04>;
+ clocks = <&tegra_car 5>;
};
tegra_car: clock {
- compatible = "nvidia,tegra114-car, nvidia,tegra30-car";
+ compatible = "nvidia,tegra114-car";
reg = <0x60006000 0x1000>;
#clock-cells = <1>;
};
@@ -66,6 +67,7 @@
reg-shift = <2>;
interrupts = <0 36 0x04>;
status = "disabled";
+ clocks = <&tegra_car 6>;
};
serial@70006040 {
@@ -74,6 +76,7 @@
reg-shift = <2>;
interrupts = <0 37 0x04>;
status = "disabled";
+ clocks = <&tegra_car 192>;
};
serial@70006200 {
@@ -82,6 +85,7 @@
reg-shift = <2>;
interrupts = <0 46 0x04>;
status = "disabled";
+ clocks = <&tegra_car 55>;
};
serial@70006300 {
@@ -90,12 +94,14 @@
reg-shift = <2>;
interrupts = <0 90 0x04>;
status = "disabled";
+ clocks = <&tegra_car 65>;
};
rtc {
compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc";
reg = <0x7000e000 0x100>;
interrupts = <0 2 0x04>;
+ clocks = <&tegra_car 4>;
};
pmc {
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index 68c8dc644383..4a4b96f6827e 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -25,11 +25,13 @@
#interrupt-cells = <1>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "via,vt8500-gpio";
- gpio-controller;
+ pinctrl: pinctrl@d8110000 {
+ compatible = "via,vt8500-pinctrl";
reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
pmc@d8130000 {
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index 398b8bca791e..b2bf359e852f 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -40,11 +40,13 @@
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "wm,wm8505-gpio";
- gpio-controller;
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8505-pinctrl";
reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
pmc@d8130000 {
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index 9313407bbc30..dd8464eeb40d 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -34,11 +34,13 @@
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "wm,wm8650-gpio";
- gpio-controller;
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8650-pinctrl";
reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
pmc@d8130000 {
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index 7149cd13e3b9..fc790d0aee66 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -41,11 +41,13 @@
interrupts = <56 57 58 59 60 61 62 63>;
};
- gpio: gpio-controller@d8110000 {
- compatible = "wm,wm8650-gpio";
- gpio-controller;
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8850-pinctrl";
reg = <0xd8110000 0x10000>;
- #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
};
pmc@d8130000 {
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 9e1c339c4491..748fc347ed18 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -118,56 +118,23 @@
};
ttc0: ttc0@f8001000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "xlnx,ttc";
+ interrupt-parent = <&intc>;
+ interrupts = < 0 10 4 0 11 4 0 12 4 >;
+ compatible = "cdns,ttc";
reg = <0xF8001000 0x1000>;
clocks = <&cpu_clk 3>;
clock-names = "cpu_1x";
clock-ranges;
-
- ttc0_0: ttc0.0 {
- status = "disabled";
- reg = <0>;
- interrupts = <0 10 4>;
- };
- ttc0_1: ttc0.1 {
- status = "disabled";
- reg = <1>;
- interrupts = <0 11 4>;
- };
- ttc0_2: ttc0.2 {
- status = "disabled";
- reg = <2>;
- interrupts = <0 12 4>;
- };
};
ttc1: ttc1@f8002000 {
- #interrupt-parent = <&intc>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "xlnx,ttc";
+ interrupt-parent = <&intc>;
+ interrupts = < 0 37 4 0 38 4 0 39 4 >;
+ compatible = "cdns,ttc";
reg = <0xF8002000 0x1000>;
clocks = <&cpu_clk 3>;
clock-names = "cpu_1x";
clock-ranges;
-
- ttc1_0: ttc1.0 {
- status = "disabled";
- reg = <0>;
- interrupts = <0 37 4>;
- };
- ttc1_1: ttc1.1 {
- status = "disabled";
- reg = <1>;
- interrupts = <0 38 4>;
- };
- ttc1_2: ttc1.2 {
- status = "disabled";
- reg = <2>;
- interrupts = <0 39 4>;
- };
};
};
};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index c772942a399a..86f44d5b0265 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -32,13 +32,3 @@
&ps_clk {
clock-frequency = <33333330>;
};
-
-&ttc0_0 {
- status = "ok";
- compatible = "xlnx,ttc-counter-clocksource";
-};
-
-&ttc0_1 {
- status = "ok";
- compatible = "xlnx,ttc-counter-clockevent";
-};
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index ac7a341bd0ff..25efb5ac30f1 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -169,6 +169,8 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 92e0f861084a..629ea5fc95cf 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -488,7 +488,6 @@ static struct resource lcdc_resources[] = {
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
@@ -505,6 +504,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
return;
}
+ if (cpu_is_at91sam9g10())
+ at91_lcdc_device.name = "at91sam9g10-lcdfb";
+ else
+ at91_lcdc_device.name = "at91sam9261-lcdfb";
+
#if defined(CONFIG_FB_ATMEL_STN)
at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 8e2d9f4a9a45..f44ffd2105a7 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -190,6 +190,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index ed666f5cb01d..858c8aac2daf 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -848,7 +848,7 @@ static struct resource lcdc_resources[] = {
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
+ .name = "at91sam9263-lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index a6c224fc9542..8b7fce067652 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -228,6 +228,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("hclk", &macb_clk),
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk),
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index f0bf68268ca2..acb703e13331 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -981,7 +981,6 @@ static struct resource lcdc_resources[] = {
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
@@ -997,6 +996,11 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
if (!data)
return;
+ if (cpu_is_at91sam9g45es())
+ at91_lcdc_device.name = "at91sam9g45es-lcdfb";
+ else
+ at91_lcdc_device.name = "at91sam9g45-lcdfb";
+
at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index c39600764236..f77fae5591bc 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -179,6 +179,7 @@ static struct clk *periph_clocks[] __initdata = {
};
static struct clk_lookup periph_clocks_lookups[] = {
+ CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index ddf223ff35c4..352468f265a9 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -514,7 +514,7 @@ static struct resource lcdc_resources[] = {
};
static struct platform_device at91_lcdc_device = {
- .name = "atmel_lcdfb",
+ .name = "at91sam9rl-lcdfb",
.id = 0,
.dev = {
.dma_mask = &lcdc_dmamask,
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index f22f69e2d081..d19edff0ea6e 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -63,6 +63,7 @@ config SOC_EXYNOS5250
bool "SAMSUNG EXYNOS5250"
default y
depends on ARCH_EXYNOS5
+ select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select S5P_DEV_MFC
@@ -83,12 +84,6 @@ config SOC_EXYNOS5440
help
Enable EXYNOS5440 SoC support
-config EXYNOS4_MCT
- bool
- default y
- help
- Use MCT (Multi Core Timer) as kernel timers
-
config EXYNOS_ATAGS
bool "ATAGS based boot for EXYNOS (deprecated)"
depends on !ARCH_MULTIPLATFORM
@@ -285,8 +280,8 @@ config MACH_UNIVERSAL_C210
select S5P_DEV_ONENAND
select S5P_DEV_TV
select S5P_GPIO_INT
- select S5P_HRT
select S5P_SETUP_MIPIPHY
+ select SAMSUNG_HRT
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board.
@@ -414,10 +409,12 @@ config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
select ARM_AMBA
+ select CLKSRC_OF
select CPU_EXYNOS4210
select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select PINCTRL
select PINCTRL_EXYNOS
+ select S5P_DEV_MFC
select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
@@ -430,6 +427,7 @@ config MACH_EXYNOS5_DT
default y
depends on ARCH_EXYNOS5
select ARM_AMBA
+ select CLKSRC_OF
select USE_OF
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 435757e57bb4..d2f6b362b6dd 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -13,10 +13,6 @@ obj- :=
# Core
obj-$(CONFIG_ARCH_EXYNOS) += common.o
-obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o
-obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
-obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
-obj-$(CONFIG_SOC_EXYNOS5250) += clock-exynos5.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
@@ -26,8 +22,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += pmu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-obj-$(CONFIG_EXYNOS4_MCT) += mct.o
-
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
# machine support
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
deleted file mode 100644
index 8a8468d83c8c..000000000000
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ /dev/null
@@ -1,1601 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4_clock_save[] = {
- SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(EXYNOS4_CLKSRC_TOP0),
- SAVE_ITEM(EXYNOS4_CLKSRC_TOP1),
- SAVE_ITEM(EXYNOS4_CLKSRC_CAM),
- SAVE_ITEM(EXYNOS4_CLKSRC_TV),
- SAVE_ITEM(EXYNOS4_CLKSRC_MFC),
- SAVE_ITEM(EXYNOS4_CLKSRC_G3D),
- SAVE_ITEM(EXYNOS4_CLKSRC_LCD0),
- SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO),
- SAVE_ITEM(EXYNOS4_CLKSRC_FSYS),
- SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0),
- SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1),
- SAVE_ITEM(EXYNOS4_CLKDIV_CAM),
- SAVE_ITEM(EXYNOS4_CLKDIV_TV),
- SAVE_ITEM(EXYNOS4_CLKDIV_MFC),
- SAVE_ITEM(EXYNOS4_CLKDIV_G3D),
- SAVE_ITEM(EXYNOS4_CLKDIV_LCD0),
- SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2),
- SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4),
- SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5),
- SAVE_ITEM(EXYNOS4_CLKDIV_TOP),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO),
- SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL),
- SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK),
- SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC),
- SAVE_ITEM(EXYNOS4_CLKSRC_DMC),
- SAVE_ITEM(EXYNOS4_CLKDIV_DMC0),
- SAVE_ITEM(EXYNOS4_CLKDIV_DMC1),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC),
- SAVE_ITEM(EXYNOS4_CLKSRC_CPU),
- SAVE_ITEM(EXYNOS4_CLKDIV_CPU),
- SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4),
- SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU),
- SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU),
-};
-#endif
-
-static struct clk exynos4_clk_sclk_hdmi27m = {
- .name = "sclk_hdmi27m",
- .rate = 27000000,
-};
-
-static struct clk exynos4_clk_sclk_hdmiphy = {
- .name = "sclk_hdmiphy",
-};
-
-static struct clk exynos4_clk_sclk_usbphy0 = {
- .name = "sclk_usbphy0",
- .rate = 27000000,
-};
-
-static struct clk exynos4_clk_sclk_usbphy1 = {
- .name = "sclk_usbphy1",
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable);
-}
-
-static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable);
-}
-
-int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable);
-}
-
-static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable);
-}
-
-static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
-}
-
-int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
-}
-
-static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable);
-}
-
-int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable);
-}
-
-int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable);
-}
-
-static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
-}
-
-int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_DMC, clk, enable);
-}
-
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos4_clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_apll = {
- .clk = {
- .name = "sclk_apll",
- .parent = &exynos4_clk_mout_apll.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 },
-};
-
-struct clksrc_clk exynos4_clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &clk_src_mpll,
-
- /* reg_src will be added in each SoCs' clock */
-};
-
-static struct clk *exynos4_clkset_moutcore_list[] = {
- [0] = &exynos4_clk_mout_apll.clk,
- [1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_moutcore = {
- .sources = exynos4_clkset_moutcore_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_moutcore_list),
-};
-
-static struct clksrc_clk exynos4_clk_moutcore = {
- .clk = {
- .name = "moutcore",
- },
- .sources = &exynos4_clkset_moutcore,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_coreclk = {
- .clk = {
- .name = "core_clk",
- .parent = &exynos4_clk_moutcore.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_armclk = {
- .clk = {
- .name = "armclk",
- .parent = &exynos4_clk_coreclk.clk,
- },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem0 = {
- .clk = {
- .name = "aclk_corem0",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cores = {
- .clk = {
- .name = "aclk_cores",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corem1 = {
- .clk = {
- .name = "aclk_corem1",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_periphclk = {
- .clk = {
- .name = "periphclk",
- .parent = &exynos4_clk_coreclk.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 },
-};
-
-/* Core list of CMU_CORE side */
-
-static struct clk *exynos4_clkset_corebus_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_corebus = {
- .sources = exynos4_clkset_corebus_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_corebus_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_corebus = {
- .clk = {
- .name = "mout_corebus",
- },
- .sources = &exynos4_clkset_mout_corebus,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dmc = {
- .clk = {
- .name = "sclk_dmc",
- .parent = &exynos4_clk_mout_corebus.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_cored = {
- .clk = {
- .name = "aclk_cored",
- .parent = &exynos4_clk_sclk_dmc.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_corep = {
- .clk = {
- .name = "aclk_corep",
- .parent = &exynos4_clk_aclk_cored.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_acp = {
- .clk = {
- .name = "aclk_acp",
- .parent = &exynos4_clk_mout_corebus.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_pclk_acp = {
- .clk = {
- .name = "pclk_acp",
- .parent = &exynos4_clk_aclk_acp.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-struct clk *exynos4_clkset_aclk_top_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_aclk = {
- .sources = exynos4_clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos4_clk_aclk_200 = {
- .clk = {
- .name = "aclk_200",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_100 = {
- .clk = {
- .name = "aclk_100",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_aclk_160 = {
- .clk = {
- .name = "aclk_160",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 },
-};
-
-struct clksrc_clk exynos4_clk_aclk_133 = {
- .clk = {
- .name = "aclk_133",
- },
- .sources = &exynos4_clkset_aclk,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 },
-};
-
-static struct clk *exynos4_clkset_vpllsrc_list[] = {
- [0] = &clk_fin_vpll,
- [1] = &exynos4_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos4_clkset_vpllsrc = {
- .sources = exynos4_clkset_vpllsrc_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos4_clk_vpllsrc = {
- .clk = {
- .name = "vpll_src",
- .enable = exynos4_clksrc_mask_top_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_vpllsrc,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_vpll_list[] = {
- [0] = &exynos4_clk_vpllsrc.clk,
- [1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_vpll = {
- .sources = exynos4_clkset_sclk_vpll_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_vpll = {
- .clk = {
- .name = "sclk_vpll",
- },
- .sources = &exynos4_clkset_sclk_vpll,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 },
-};
-
-static struct clk exynos4_init_clocks_off[] = {
- {
- .name = "timers",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1<<24),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "jpeg",
- .id = 0,
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "tsi",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.0",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.1",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.2",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "hsmmc",
- .devname = "exynos4-sdhci.3",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "biu",
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "onenand",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "nfcon",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "dac",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "mixer",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "vp",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hdmi",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "hdmiphy",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_hdmiphy_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "dacphy",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_dac_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "adc",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "tmu_apbif",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "keypad",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "rtc",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "watchdog",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "usbhost",
- .enable = exynos4_clk_ip_fsys_ctrl ,
- .ctrlbit = (1 << 12),
- }, {
- .name = "otg",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 23),
- }, {
- .name = "slimbus",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "spdif",
- .devname = "samsung-spdif",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 26),
- }, {
- .name = "ac97",
- .devname = "samsung-ac97",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "mfc",
- .devname = "s5p-mfc",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.2",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.3",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.4",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.5",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.6",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.7",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "i2c",
- .devname = "s3c2440-hdmiphy-i2c",
- .parent = &exynos4_clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.0",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.1",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.2",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.4",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.5",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.6",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.7",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.8",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.10",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 4),
- }
-};
-
-static struct clk exynos4_init_clocks_on[] = {
- {
- .name = "uart",
- .devname = "s5pv210-uart.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.3",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.4",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.5",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 5),
- }
-};
-
-static struct clk exynos4_clk_pdma0 = {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk exynos4_clk_pdma1 = {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-static struct clk exynos4_clk_mdma1 = {
- .name = "dma",
- .devname = "dma-pl330.2",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = ((1 << 8) | (1 << 5) | (1 << 2)),
-};
-
-static struct clk exynos4_clk_fimd0 = {
- .name = "fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-struct clk *exynos4_clkset_group_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &clk_xusbxti,
- [2] = &exynos4_clk_sclk_hdmi27m,
- [3] = &exynos4_clk_sclk_usbphy0,
- [4] = &exynos4_clk_sclk_usbphy1,
- [5] = &exynos4_clk_sclk_hdmiphy,
- [6] = &exynos4_clk_mout_mpll.clk,
- [7] = &exynos4_clk_mout_epll.clk,
- [8] = &exynos4_clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_group = {
- .sources = exynos4_clkset_group_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_group_list),
-};
-
-static struct clk *exynos4_clkset_mout_g2d0_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_g2d0 = {
- .sources = exynos4_clkset_mout_g2d0_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list),
-};
-
-static struct clk *exynos4_clkset_mout_g2d1_list[] = {
- [0] = &exynos4_clk_mout_epll.clk,
- [1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources exynos4_clkset_mout_g2d1 = {
- .sources = exynos4_clkset_mout_g2d1_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list),
-};
-
-static struct clk *exynos4_clkset_mout_mfc0_list[] = {
- [0] = &exynos4_clk_mout_mpll.clk,
- [1] = &exynos4_clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc0 = {
- .sources = exynos4_clkset_mout_mfc0_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc0_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc0 = {
- .clk = {
- .name = "mout_mfc0",
- },
- .sources = &exynos4_clkset_mout_mfc0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc1_list[] = {
- [0] = &exynos4_clk_mout_epll.clk,
- [1] = &exynos4_clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc1 = {
- .sources = exynos4_clkset_mout_mfc1_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc1_list),
-};
-
-static struct clksrc_clk exynos4_clk_mout_mfc1 = {
- .clk = {
- .name = "mout_mfc1",
- },
- .sources = &exynos4_clkset_mout_mfc1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_mout_mfc_list[] = {
- [0] = &exynos4_clk_mout_mfc0.clk,
- [1] = &exynos4_clk_mout_mfc1.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_mout_mfc = {
- .sources = exynos4_clkset_mout_mfc_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc_list),
-};
-
-static struct clk *exynos4_clkset_sclk_dac_list[] = {
- [0] = &exynos4_clk_sclk_vpll.clk,
- [1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_dac = {
- .sources = exynos4_clkset_sclk_dac_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_dac_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_dac = {
- .clk = {
- .name = "sclk_dac",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos4_clkset_sclk_dac,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_pixel = {
- .clk = {
- .name = "sclk_pixel",
- .parent = &exynos4_clk_sclk_vpll.clk,
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 },
-};
-
-static struct clk *exynos4_clkset_sclk_hdmi_list[] = {
- [0] = &exynos4_clk_sclk_pixel.clk,
- [1] = &exynos4_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_hdmi = {
- .sources = exynos4_clkset_sclk_hdmi_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_hdmi = {
- .clk = {
- .name = "sclk_hdmi",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_sclk_hdmi,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos4_clkset_sclk_mixer_list[] = {
- [0] = &exynos4_clk_sclk_dac.clk,
- [1] = &exynos4_clk_sclk_hdmi.clk,
-};
-
-static struct clksrc_sources exynos4_clkset_sclk_mixer = {
- .sources = exynos4_clkset_sclk_mixer_list,
- .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_mixer_list),
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mixer = {
- .clk = {
- .name = "sclk_mixer",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos4_clkset_sclk_mixer,
- .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk *exynos4_sclk_tv[] = {
- &exynos4_clk_sclk_dac,
- &exynos4_clk_sclk_pixel,
- &exynos4_clk_sclk_hdmi,
- &exynos4_clk_sclk_mixer,
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc0 = {
- .clk = {
- .name = "dout_mmc0",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc1 = {
- .clk = {
- .name = "dout_mmc1",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc2 = {
- .clk = {
- .name = "dout_mmc2",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc3 = {
- .clk = {
- .name = "dout_mmc3",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_dout_mmc4 = {
- .clk = {
- .name = "dout_mmc4",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clksrcs[] = {
- {
- .clk = {
- .name = "sclk_pwm",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 28),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clksrc_mask_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mfc",
- .devname = "s5p-mfc",
- },
- .sources = &exynos4_clkset_mout_mfc,
- .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "ciu",
- .parent = &exynos4_clk_dout_mmc4.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 },
- }
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart0 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.0",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart1 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.1",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart2 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.2",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_uart3 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.3",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.0",
- .parent = &exynos4_clk_dout_mmc0.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.1",
- .parent = &exynos4_clk_dout_mmc1.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.2",
- .parent = &exynos4_clk_dout_mmc2.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "exynos4-sdhci.3",
- .parent = &exynos4_clk_dout_mmc3.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi0 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.0",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi1 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.1",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_mdout_spi2 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.2",
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.0",
- .parent = &exynos4_clk_mdout_spi0.clk,
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.1",
- .parent = &exynos4_clk_mdout_spi1.clk,
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos4_clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.2",
- .parent = &exynos4_clk_mdout_spi2.clk,
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos4_sysclks[] = {
- &exynos4_clk_mout_apll,
- &exynos4_clk_sclk_apll,
- &exynos4_clk_mout_epll,
- &exynos4_clk_mout_mpll,
- &exynos4_clk_moutcore,
- &exynos4_clk_coreclk,
- &exynos4_clk_armclk,
- &exynos4_clk_aclk_corem0,
- &exynos4_clk_aclk_cores,
- &exynos4_clk_aclk_corem1,
- &exynos4_clk_periphclk,
- &exynos4_clk_mout_corebus,
- &exynos4_clk_sclk_dmc,
- &exynos4_clk_aclk_cored,
- &exynos4_clk_aclk_corep,
- &exynos4_clk_aclk_acp,
- &exynos4_clk_pclk_acp,
- &exynos4_clk_vpllsrc,
- &exynos4_clk_sclk_vpll,
- &exynos4_clk_aclk_200,
- &exynos4_clk_aclk_100,
- &exynos4_clk_aclk_160,
- &exynos4_clk_aclk_133,
- &exynos4_clk_dout_mmc0,
- &exynos4_clk_dout_mmc1,
- &exynos4_clk_dout_mmc2,
- &exynos4_clk_dout_mmc3,
- &exynos4_clk_dout_mmc4,
- &exynos4_clk_mout_mfc0,
- &exynos4_clk_mout_mfc1,
-};
-
-static struct clk *exynos4_clk_cdev[] = {
- &exynos4_clk_pdma0,
- &exynos4_clk_pdma1,
- &exynos4_clk_mdma1,
- &exynos4_clk_fimd0,
-};
-
-static struct clksrc_clk *exynos4_clksrc_cdev[] = {
- &exynos4_clk_sclk_uart0,
- &exynos4_clk_sclk_uart1,
- &exynos4_clk_sclk_uart2,
- &exynos4_clk_sclk_uart3,
- &exynos4_clk_sclk_mmc0,
- &exynos4_clk_sclk_mmc1,
- &exynos4_clk_sclk_mmc2,
- &exynos4_clk_sclk_mmc3,
- &exynos4_clk_sclk_spi0,
- &exynos4_clk_sclk_spi1,
- &exynos4_clk_sclk_spi2,
- &exynos4_clk_mdout_spi0,
- &exynos4_clk_mdout_spi1,
- &exynos4_clk_mdout_spi2,
-};
-
-static struct clk_lookup exynos4_clk_lookup[] = {
- CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk),
- CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
- CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
- CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
- CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
- CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
- CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
- CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
- CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
- CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
- CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
- CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
- CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
- CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
- CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
-};
-
-static int xtal_rate;
-
-static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
-{
- if (soc_is_exynos4210())
- return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0),
- pll_4508);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0));
- else
- return 0;
-}
-
-static struct clk_ops exynos4_fout_apll_ops = {
- .get_rate = exynos4_fout_apll_get_rate,
-};
-
-static u32 exynos4_vpll_div[][8] = {
- { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
- { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
-};
-
-static unsigned long exynos4_vpll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int vpll_con0, vpll_con1 = 0;
- unsigned int i;
-
- /* Return if nothing changed */
- if (clk->rate == rate)
- return 0;
-
- vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0);
- vpll_con0 &= ~(0x1 << 27 | \
- PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
- PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
- PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
- vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1);
- vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
- PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
- PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
-
- for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) {
- if (exynos4_vpll_div[i][0] == rate) {
- vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
- vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
- vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
- vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
- vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT;
- vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT;
- vpll_con0 |= exynos4_vpll_div[i][7] << 27;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(exynos4_vpll_div)) {
- printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
- __func__);
- return -EINVAL;
- }
-
- __raw_writel(vpll_con0, EXYNOS4_VPLL_CON0);
- __raw_writel(vpll_con1, EXYNOS4_VPLL_CON1);
-
- /* Wait for VPLL lock */
- while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
- continue;
-
- clk->rate = rate;
- return 0;
-}
-
-static struct clk_ops exynos4_vpll_ops = {
- .get_rate = exynos4_vpll_get_rate,
- .set_rate = exynos4_vpll_set_rate,
-};
-
-void __init_or_cpufreq exynos4_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long apll = 0;
- unsigned long mpll = 0;
- unsigned long epll = 0;
- unsigned long vpll = 0;
- unsigned long vpllsrc;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long sclk_dmc;
- unsigned long aclk_200;
- unsigned long aclk_100;
- unsigned long aclk_160;
- unsigned long aclk_133;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
-
- xtal_rate = xtal;
-
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- if (soc_is_exynos4210()) {
- apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0),
- pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0),
- pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
- __raw_readl(EXYNOS4_EPLL_CON1), pll_4600);
-
- vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
- __raw_readl(EXYNOS4_VPLL_CON1), pll_4650c);
- } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0));
- mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0));
- epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
- __raw_readl(EXYNOS4_EPLL_CON1));
-
- vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
- vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
- __raw_readl(EXYNOS4_VPLL_CON1));
- } else {
- /* nothing */
- }
-
- clk_fout_apll.ops = &exynos4_fout_apll_ops;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_vpll.ops = &exynos4_vpll_ops;
- clk_fout_vpll.rate = vpll;
-
- printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
- apll, mpll, epll, vpll);
-
- armclk = clk_get_rate(&exynos4_clk_armclk.clk);
- sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk);
-
- aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk);
- aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk);
- aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk);
- aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk);
-
- printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
- "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
- armclk, sclk_dmc, aclk_200,
- aclk_100, aclk_160, aclk_133);
-
- clk_f.rate = armclk;
- clk_h.rate = sclk_dmc;
- clk_p.rate = aclk_100;
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++)
- s3c_set_clksrc(&exynos4_clksrcs[ptr], true);
-}
-
-static struct clk *exynos4_clks[] __initdata = {
- &exynos4_clk_sclk_hdmi27m,
- &exynos4_clk_sclk_hdmiphy,
- &exynos4_clk_sclk_usbphy0,
- &exynos4_clk_sclk_usbphy1,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
- return 0;
-}
-
-static void exynos4_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-}
-
-#else
-#define exynos4_clock_suspend NULL
-#define exynos4_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4_clock_syscore_ops = {
- .suspend = exynos4_clock_suspend,
- .resume = exynos4_clock_resume,
-};
-
-void __init exynos4_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++)
- s3c_register_clksrc(exynos4_sysclks[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++)
- s3c_register_clksrc(exynos4_sclk_tv[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++)
- s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1);
-
- s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs));
- s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on));
-
- s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++)
- s3c_disable_clocks(exynos4_clk_cdev[ptr], 1);
-
- s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
- s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
- clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
-
- register_syscore_ops(&exynos4_clock_syscore_ops);
- s3c24xx_register_clock(&dummy_apb_pclk);
-
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h
deleted file mode 100644
index bd12d5f8b63d..000000000000
--- a/arch/arm/mach-exynos/clock-exynos4.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clksrc_clk exynos4_clk_aclk_133;
-extern struct clksrc_clk exynos4_clk_mout_mpll;
-
-extern struct clksrc_sources exynos4_clkset_mout_corebus;
-extern struct clksrc_sources exynos4_clkset_group;
-
-extern struct clk *exynos4_clkset_aclk_top_list[];
-extern struct clk *exynos4_clkset_group_list[];
-
-extern struct clksrc_sources exynos4_clkset_mout_g2d0;
-extern struct clksrc_sources exynos4_clkset_mout_g2d1;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_dmc_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
deleted file mode 100644
index 19af9f783c56..000000000000
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4210 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4210_clock_save[] = {
- SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
- SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
- SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
- SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
- SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
-};
-#endif
-
-static struct clksrc_clk *sysclks[] = {
- /* nothing here yet */
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &exynos4_clkset_mout_g2d0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos4210_clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &exynos4_clkset_mout_g2d1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos4210_clkset_mout_g2d_list[] = {
- [0] = &exynos4210_clk_mout_g2d0.clk,
- [1] = &exynos4210_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4210_clkset_mout_g2d = {
- .sources = exynos4210_clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(exynos4210_clkset_mout_g2d_list),
-};
-
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_sata",
- .id = -1,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos4_clkset_mout_corebus,
- .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clksrc_mask_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos4_clkset_group,
- .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &exynos4210_clkset_mout_g2d,
- .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
- },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "sataphy",
- .id = -1,
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sata",
- .id = -1,
- .parent = &exynos4_clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "fimd",
- .devname = "exynos4-fb.1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.9",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.11",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 0),
- },
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4210_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-
- return 0;
-}
-
-static void exynos4210_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
-}
-
-#else
-#define exynos4210_clock_suspend NULL
-#define exynos4210_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4210_clock_syscore_ops = {
- .suspend = exynos4210_clock_suspend,
- .resume = exynos4210_clock_resume,
-};
-
-void __init exynos4210_register_clocks(void)
-{
- int ptr;
-
- exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
- exynos4_clk_mout_mpll.reg_src.shift = 8;
- exynos4_clk_mout_mpll.reg_src.size = 1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- register_syscore_ops(&exynos4210_clock_syscore_ops);
-}
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
deleted file mode 100644
index 529476f8ec71..000000000000
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4212 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-#include "clock-exynos4.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4212_clock_save[] = {
- SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
- SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
- SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE),
- SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR),
-};
-#endif
-
-static int exynos4212_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos4212_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS4_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static struct clk *clk_src_mpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos4_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clk_src_mpll_user = {
- .sources = clk_src_mpll_user_list,
- .nr_sources = ARRAY_SIZE(clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk clk_mout_mpll_user = {
- .clk = {
- .name = "mout_mpll_user",
- },
- .sources = &clk_src_mpll_user,
- .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &exynos4_clkset_mout_g2d0,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk exynos4x12_clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &exynos4_clkset_mout_g2d1,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos4x12_clkset_mout_g2d_list[] = {
- [0] = &exynos4x12_clk_mout_g2d0.clk,
- [1] = &exynos4x12_clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources exynos4x12_clkset_mout_g2d = {
- .sources = exynos4x12_clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(exynos4x12_clkset_mout_g2d_list),
-};
-
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_mpll_user,
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &exynos4x12_clkset_mout_g2d,
- .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 28, .size = 1 },
- .reg_div = { .reg = EXYNOS4_CLKDIV_DMC1, .shift = 0, .size = 4 },
- },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.9",
- .enable = exynos4_clk_ip_dmc_ctrl,
- .ctrlbit = (1 << 24),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.12",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (7 << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.13",
- .enable = exynos4212_clk_ip_isp1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.14",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.15",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "flite",
- .devname = "exynos-fimc-lite.0",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "flite",
- .devname = "exynos-fimc-lite.1",
- .enable = exynos4212_clk_ip_isp0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_dmc_ctrl,
- .ctrlbit = (1 << 23),
- },
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4212_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-
- return 0;
-}
-
-static void exynos4212_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
-}
-
-#else
-#define exynos4212_clock_suspend NULL
-#define exynos4212_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos4212_clock_syscore_ops = {
- .suspend = exynos4212_clock_suspend,
- .resume = exynos4212_clock_resume,
-};
-
-void __init exynos4212_register_clocks(void)
-{
- int ptr;
-
- /* usbphy1 is removed */
- exynos4_clkset_group_list[4] = NULL;
-
- /* mout_mpll_user is used */
- exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk;
- exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
-
- exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC;
- exynos4_clk_mout_mpll.reg_src.shift = 12;
- exynos4_clk_mout_mpll.reg_src.size = 1;
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
- register_syscore_ops(&exynos4212_clock_syscore_ops);
-}
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
deleted file mode 100644
index b0ea31fc9fb8..000000000000
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ /dev/null
@@ -1,1645 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Clock support for EXYNOS5 SoCs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-
-#include "common.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos5_clock_save[] = {
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_TOP),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_GSCL),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_DISP1_0),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_FSYS),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC0),
- SAVE_ITEM(EXYNOS5_CLKSRC_MASK_PERIC1),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_GSCL),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_DISP1),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_MFC),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_G3D),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_GEN),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_FSYS),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIC),
- SAVE_ITEM(EXYNOS5_CLKGATE_IP_PERIS),
- SAVE_ITEM(EXYNOS5_CLKGATE_BLOCK),
- SAVE_ITEM(EXYNOS5_CLKDIV_TOP0),
- SAVE_ITEM(EXYNOS5_CLKDIV_TOP1),
- SAVE_ITEM(EXYNOS5_CLKDIV_GSCL),
- SAVE_ITEM(EXYNOS5_CLKDIV_DISP1_0),
- SAVE_ITEM(EXYNOS5_CLKDIV_GEN),
- SAVE_ITEM(EXYNOS5_CLKDIV_MAUDIO),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS0),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS1),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS2),
- SAVE_ITEM(EXYNOS5_CLKDIV_FSYS3),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC0),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC1),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC2),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC3),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC4),
- SAVE_ITEM(EXYNOS5_CLKDIV_PERIC5),
- SAVE_ITEM(EXYNOS5_SCLK_DIV_ISP),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP0),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP1),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP2),
- SAVE_ITEM(EXYNOS5_CLKSRC_TOP3),
- SAVE_ITEM(EXYNOS5_CLKSRC_GSCL),
- SAVE_ITEM(EXYNOS5_CLKSRC_DISP1_0),
- SAVE_ITEM(EXYNOS5_CLKSRC_MAUDIO),
- SAVE_ITEM(EXYNOS5_CLKSRC_FSYS),
- SAVE_ITEM(EXYNOS5_CLKSRC_PERIC0),
- SAVE_ITEM(EXYNOS5_CLKSRC_PERIC1),
- SAVE_ITEM(EXYNOS5_SCLK_SRC_ISP),
- SAVE_ITEM(EXYNOS5_EPLL_CON0),
- SAVE_ITEM(EXYNOS5_EPLL_CON1),
- SAVE_ITEM(EXYNOS5_EPLL_CON2),
- SAVE_ITEM(EXYNOS5_VPLL_CON0),
- SAVE_ITEM(EXYNOS5_VPLL_CON1),
- SAVE_ITEM(EXYNOS5_VPLL_CON2),
- SAVE_ITEM(EXYNOS5_PWR_CTRL1),
- SAVE_ITEM(EXYNOS5_PWR_CTRL2),
-};
-#endif
-
-static struct clk exynos5_clk_sclk_dptxphy = {
- .name = "sclk_dptx",
-};
-
-static struct clk exynos5_clk_sclk_hdmi24m = {
- .name = "sclk_hdmi24m",
- .rate = 24000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmi27m = {
- .name = "sclk_hdmi27m",
- .rate = 27000000,
-};
-
-static struct clk exynos5_clk_sclk_hdmiphy = {
- .name = "sclk_hdmiphy",
-};
-
-static struct clk exynos5_clk_sclk_usbphy = {
- .name = "sclk_usbphy",
- .rate = 48000000,
-};
-
-static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable);
-}
-
-static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable);
-}
-
-static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
-}
-
-static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable);
-}
-
-static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable);
-}
-
-static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
-}
-
-static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable);
-}
-
-static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos5_clk_block_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable);
-}
-
-static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
-}
-
-static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable);
-}
-
-static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
-}
-
-static int exynos5_clk_ip_gscl_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GSCL, clk, enable);
-}
-
-static int exynos5_clk_ip_isp0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP0, clk, enable);
-}
-
-static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable);
-}
-
-static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk exynos5_clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_apll = {
- .clk = {
- .name = "sclk_apll",
- .parent = &exynos5_clk_mout_apll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll_fout = {
- .clk = {
- .name = "mout_bpll_fout",
- },
- .sources = &clk_src_bpll_fout,
- .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_bpll_list[] = {
- [0] = &clk_fin_bpll,
- [1] = &exynos5_clk_mout_bpll_fout.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_bpll = {
- .sources = exynos5_clk_src_bpll_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll = {
- .clk = {
- .name = "mout_bpll",
- },
- .sources = &exynos5_clk_src_bpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_bpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_bpll_user = {
- .sources = exynos5_clk_src_bpll_user_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_bpll_user = {
- .clk = {
- .name = "mout_bpll_user",
- },
- .sources = &exynos5_clk_src_bpll_user,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpll = {
- .clk = {
- .name = "mout_cpll",
- },
- .sources = &clk_src_cpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll_fout = {
- .clk = {
- .name = "mout_mpll_fout",
- },
- .sources = &clk_src_mpll_fout,
- .reg_src = { .reg = EXYNOS5_PLL_DIV2_SEL, .shift = 4, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_mpll_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos5_clk_mout_mpll_fout.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_mpll = {
- .sources = exynos5_clk_src_mpll_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &exynos5_clk_src_mpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
-};
-
-static struct clk *exynos_clkset_vpllsrc_list[] = {
- [0] = &clk_fin_vpll,
- [1] = &exynos5_clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources exynos5_clkset_vpllsrc = {
- .sources = exynos_clkset_vpllsrc_list,
- .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk exynos5_clk_vpllsrc = {
- .clk = {
- .name = "vpll_src",
- .enable = exynos5_clksrc_mask_top_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos5_clkset_vpllsrc,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_sclk_vpll_list[] = {
- [0] = &exynos5_clk_vpllsrc.clk,
- [1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_vpll = {
- .sources = exynos5_clkset_sclk_vpll_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_vpll = {
- .clk = {
- .name = "sclk_vpll",
- },
- .sources = &exynos5_clkset_sclk_vpll,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_pixel = {
- .clk = {
- .name = "sclk_pixel",
- .parent = &exynos5_clk_sclk_vpll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 },
-};
-
-static struct clk *exynos5_clkset_sclk_hdmi_list[] = {
- [0] = &exynos5_clk_sclk_pixel.clk,
- [1] = &exynos5_clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources exynos5_clkset_sclk_hdmi = {
- .sources = exynos5_clkset_sclk_hdmi_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk exynos5_clk_sclk_hdmi = {
- .clk = {
- .name = "sclk_hdmi",
- .enable = exynos5_clksrc_mask_disp1_0_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &exynos5_clkset_sclk_hdmi,
- .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 },
-};
-
-static struct clksrc_clk *exynos5_sclk_tv[] = {
- &exynos5_clk_sclk_pixel,
- &exynos5_clk_sclk_hdmi,
-};
-
-static struct clk *exynos5_clk_src_mpll_user_list[] = {
- [0] = &clk_fin_mpll,
- [1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_mpll_user = {
- .sources = exynos5_clk_src_mpll_user_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_mpll_user = {
- .clk = {
- .name = "mout_mpll_user",
- },
- .sources = &exynos5_clk_src_mpll_user,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_mout_cpu_list[] = {
- [0] = &exynos5_clk_mout_apll.clk,
- [1] = &exynos5_clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_mout_cpu = {
- .sources = exynos5_clkset_mout_cpu_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_cpu = {
- .clk = {
- .name = "mout_cpu",
- },
- .sources = &exynos5_clkset_mout_cpu,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_armclk = {
- .clk = {
- .name = "dout_armclk",
- .parent = &exynos5_clk_mout_cpu.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_arm2clk = {
- .clk = {
- .name = "dout_arm2clk",
- .parent = &exynos5_clk_dout_armclk.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 },
-};
-
-static struct clk exynos5_clk_armclk = {
- .name = "armclk",
- .parent = &exynos5_clk_dout_arm2clk.clk,
-};
-
-/* Core list of CMU_CDREX side */
-
-static struct clk *exynos5_clkset_cdrex_list[] = {
- [0] = &exynos5_clk_mout_mpll.clk,
- [1] = &exynos5_clk_mout_bpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_cdrex = {
- .sources = exynos5_clkset_cdrex_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list),
-};
-
-static struct clksrc_clk exynos5_clk_cdrex = {
- .clk = {
- .name = "clk_cdrex",
- },
- .sources = &exynos5_clkset_cdrex,
- .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_acp = {
- .clk = {
- .name = "aclk_acp",
- .parent = &exynos5_clk_mout_mpll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_pclk_acp = {
- .clk = {
- .name = "pclk_acp",
- .parent = &exynos5_clk_aclk_acp.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-static struct clk *exynos5_clkset_aclk_top_list[] = {
- [0] = &exynos5_clk_mout_mpll_user.clk,
- [1] = &exynos5_clk_mout_bpll_user.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk = {
- .sources = exynos5_clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_400 = {
- .clk = {
- .name = "aclk_400",
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
-};
-
-static struct clk *exynos5_clkset_aclk_333_166_list[] = {
- [0] = &exynos5_clk_mout_cpll.clk,
- [1] = &exynos5_clk_mout_mpll_user.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_333_166 = {
- .sources = exynos5_clkset_aclk_333_166_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_333 = {
- .clk = {
- .name = "aclk_333",
- },
- .sources = &exynos5_clkset_aclk_333_166,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_166 = {
- .clk = {
- .name = "aclk_166",
- },
- .sources = &exynos5_clkset_aclk_333_166,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_266 = {
- .clk = {
- .name = "aclk_266",
- .parent = &exynos5_clk_mout_mpll_user.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_200 = {
- .clk = {
- .name = "aclk_200",
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66_pre = {
- .clk = {
- .name = "aclk_66_pre",
- .parent = &exynos5_clk_mout_mpll_user.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_aclk_66 = {
- .clk = {
- .name = "aclk_66",
- .parent = &exynos5_clk_aclk_66_pre.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = {
- .clk = {
- .name = "mout_aclk_300_gscl_mid",
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_aclk_300_mid1_list[] = {
- [0] = &exynos5_clk_sclk_vpll.clk,
- [1] = &exynos5_clk_mout_cpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = {
- .sources = exynos5_clkset_aclk_300_mid1_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = {
- .clk = {
- .name = "mout_aclk_300_gscl_mid1",
- },
- .sources = &exynos5_clkset_aclk_300_gscl_mid1,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 },
-};
-
-static struct clk *exynos5_clkset_aclk_300_gscl_list[] = {
- [0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk,
- [1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_aclk_300_gscl = {
- .sources = exynos5_clkset_aclk_300_gscl_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list),
-};
-
-static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = {
- .clk = {
- .name = "mout_aclk_300_gscl",
- },
- .sources = &exynos5_clkset_aclk_300_gscl,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 },
-};
-
-static struct clk *exynos5_clk_src_gscl_300_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &exynos5_clk_mout_aclk_300_gscl.clk,
-};
-
-static struct clksrc_sources exynos5_clk_src_gscl_300 = {
- .sources = exynos5_clk_src_gscl_300_list,
- .nr_sources = ARRAY_SIZE(exynos5_clk_src_gscl_300_list),
-};
-
-static struct clksrc_clk exynos5_clk_aclk_300_gscl = {
- .clk = {
- .name = "aclk_300_gscl",
- },
- .sources = &exynos5_clk_src_gscl_300,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 },
-};
-
-static struct clk exynos5_init_clocks_off[] = {
- {
- .name = "timers",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 24),
- }, {
- .name = "tmu_apbif",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peris_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "rtc",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peris_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "watchdog",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peris_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "biu", /* bus interface unit clock */
- .devname = "dw_mmc.0",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "biu",
- .devname = "dw_mmc.1",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "biu",
- .devname = "dw_mmc.2",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "biu",
- .devname = "dw_mmc.3",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "sata",
- .devname = "exynos5-sata",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "sata-phy",
- .devname = "exynos5-sata-phy",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 24),
- }, {
- .name = "i2c",
- .devname = "exynos5-sata-phy-i2c",
- .parent = &exynos5_clk_aclk_200.clk,
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 25),
- }, {
- .name = "mfc",
- .devname = "s5p-mfc-v6",
- .enable = exynos5_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hdmi",
- .devname = "exynos5-hdmi",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hdmiphy",
- .devname = "exynos5-hdmi",
- .enable = exynos5_clk_hdmiphy_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "mixer",
- .devname = "exynos5-mixer",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "dp",
- .devname = "exynos-dp",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "jpeg",
- .enable = exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "dsim0",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.1",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "pcm",
- .devname = "samsung-pcm.2",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 23),
- }, {
- .name = "spdif",
- .devname = "samsung-spdif",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 26),
- }, {
- .name = "ac97",
- .devname = "samsung-ac97",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "usbhost",
- .enable = exynos5_clk_ip_fsys_ctrl ,
- .ctrlbit = (1 << 18),
- }, {
- .name = "usbotg",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "nfcon",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "iop",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)),
- }, {
- .name = "core_iop",
- .enable = exynos5_clk_ip_core_ctrl,
- .ctrlbit = ((1 << 21) | (1 << 3)),
- }, {
- .name = "mcu_iop",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.2",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.3",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.4",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.5",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.6",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.7",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "i2c",
- .devname = "s3c2440-hdmiphy-i2c",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.0",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.1",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "exynos4210-spi.2",
- .parent = &exynos5_clk_aclk_66.clk,
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.0",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.1",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.2",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "gscl",
- .devname = "exynos-gsc.3",
- .enable = exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.1",
- .enable = &exynos5_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.0",
- .enable = &exynos5_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.2",
- .enable = &exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 9)
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.3",
- .enable = &exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.4",
- .enable = &exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 6)
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.5",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.6",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.7",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.8",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.9",
- .enable = &exynos5_clk_ip_isp0_ctrl,
- .ctrlbit = (0x3F << 8),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.10",
- .enable = &exynos5_clk_ip_isp1_ctrl,
- .ctrlbit = (0xF << 4),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.11",
- .enable = &exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 8)
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.12",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.13",
- .enable = &exynos5_clk_ip_gscl_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "sysmmu",
- .devname = "exynos-sysmmu.14",
- .enable = &exynos5_clk_ip_acp_ctrl,
- .ctrlbit = (1 << 7)
- }
-};
-
-static struct clk exynos5_init_clocks_on[] = {
- {
- .name = "uart",
- .devname = "s5pv210-uart.0",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.1",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.2",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.3",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.4",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.5",
- .enable = exynos5_clk_ip_peric_ctrl,
- .ctrlbit = (1 << 5),
- }
-};
-
-static struct clk exynos5_clk_pdma0 = {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-static struct clk exynos5_clk_pdma1 = {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos5_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 2),
-};
-
-static struct clk exynos5_clk_mdma1 = {
- .name = "dma",
- .devname = "dma-pl330.2",
- .enable = exynos5_clk_ip_gen_ctrl,
- .ctrlbit = (1 << 4),
-};
-
-static struct clk exynos5_clk_fimd1 = {
- .name = "fimd",
- .devname = "exynos5-fb.1",
- .enable = exynos5_clk_ip_disp1_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk *exynos5_clkset_group_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = NULL,
- [2] = &exynos5_clk_sclk_hdmi24m,
- [3] = &exynos5_clk_sclk_dptxphy,
- [4] = &exynos5_clk_sclk_usbphy,
- [5] = &exynos5_clk_sclk_hdmiphy,
- [6] = &exynos5_clk_mout_mpll_user.clk,
- [7] = &exynos5_clk_mout_epll.clk,
- [8] = &exynos5_clk_sclk_vpll.clk,
- [9] = &exynos5_clk_mout_cpll.clk,
-};
-
-static struct clksrc_sources exynos5_clkset_group = {
- .sources = exynos5_clkset_group_list,
- .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list),
-};
-
-/* Possible clock sources for aclk_266_gscl_sub Mux */
-static struct clk *clk_src_gscl_266_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &exynos5_clk_aclk_266.clk,
-};
-
-static struct clksrc_sources clk_src_gscl_266 = {
- .sources = clk_src_gscl_266_list,
- .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list),
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc0 = {
- .clk = {
- .name = "dout_mmc0",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc1 = {
- .clk = {
- .name = "dout_mmc1",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc2 = {
- .clk = {
- .name = "dout_mmc2",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc3 = {
- .clk = {
- .name = "dout_mmc3",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_dout_mmc4 = {
- .clk = {
- .name = "dout_mmc4",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart0 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.0",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart1 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.1",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart2 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.2",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_uart3 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.3",
- .enable = exynos5_clksrc_mask_peric0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
- .clk = {
- .name = "ciu", /* card interface unit clock */
- .devname = "dw_mmc.0",
- .parent = &exynos5_clk_dout_mmc0.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
- .clk = {
- .name = "ciu",
- .devname = "dw_mmc.1",
- .parent = &exynos5_clk_dout_mmc1.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
- .clk = {
- .name = "ciu",
- .devname = "dw_mmc.2",
- .parent = &exynos5_clk_dout_mmc2.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
- .clk = {
- .name = "ciu",
- .devname = "dw_mmc.3",
- .parent = &exynos5_clk_dout_mmc3.clk,
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi0 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.0",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi1 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.1",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_mdout_spi2 = {
- .clk = {
- .name = "mdout_spi",
- .devname = "exynos4210-spi.2",
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.0",
- .parent = &exynos5_clk_mdout_spi0.clk,
- .enable = exynos5_clksrc_mask_peric1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.1",
- .parent = &exynos5_clk_mdout_spi1.clk,
- .enable = exynos5_clksrc_mask_peric1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "exynos4210-spi.2",
- .parent = &exynos5_clk_mdout_spi2.clk,
- .enable = exynos5_clksrc_mask_peric1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk exynos5_clk_sclk_fimd1 = {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos5-fb.1",
- .enable = exynos5_clksrc_mask_disp1_0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk exynos5_clksrcs[] = {
- {
- .clk = {
- .name = "aclk_266_gscl",
- },
- .sources = &clk_src_gscl_266,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 },
- }, {
- .clk = {
- .name = "sclk_g3d",
- .devname = "mali-t604.0",
- .enable = exynos5_clk_block_ctrl,
- .ctrlbit = (1 << 1),
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
- }, {
- .clk = {
- .name = "sclk_sata",
- .devname = "exynos5-sata",
- .enable = exynos5_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos5_clkset_aclk,
- .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS0, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_gscl_wrap",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_gscl_wrap",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 28),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam0",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam1",
- .enable = exynos5_clksrc_mask_gscl_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &exynos5_clkset_group,
- .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_jpeg",
- .parent = &exynos5_clk_mout_cpll.clk,
- },
- .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 },
- },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *exynos5_sysclks[] = {
- &exynos5_clk_mout_apll,
- &exynos5_clk_sclk_apll,
- &exynos5_clk_mout_bpll,
- &exynos5_clk_mout_bpll_fout,
- &exynos5_clk_mout_bpll_user,
- &exynos5_clk_mout_cpll,
- &exynos5_clk_mout_epll,
- &exynos5_clk_mout_mpll,
- &exynos5_clk_mout_mpll_fout,
- &exynos5_clk_mout_mpll_user,
- &exynos5_clk_vpllsrc,
- &exynos5_clk_sclk_vpll,
- &exynos5_clk_mout_cpu,
- &exynos5_clk_dout_armclk,
- &exynos5_clk_dout_arm2clk,
- &exynos5_clk_cdrex,
- &exynos5_clk_aclk_400,
- &exynos5_clk_aclk_333,
- &exynos5_clk_aclk_266,
- &exynos5_clk_aclk_200,
- &exynos5_clk_aclk_166,
- &exynos5_clk_aclk_300_gscl,
- &exynos5_clk_mout_aclk_300_gscl,
- &exynos5_clk_mout_aclk_300_gscl_mid,
- &exynos5_clk_mout_aclk_300_gscl_mid1,
- &exynos5_clk_aclk_66_pre,
- &exynos5_clk_aclk_66,
- &exynos5_clk_dout_mmc0,
- &exynos5_clk_dout_mmc1,
- &exynos5_clk_dout_mmc2,
- &exynos5_clk_dout_mmc3,
- &exynos5_clk_dout_mmc4,
- &exynos5_clk_aclk_acp,
- &exynos5_clk_pclk_acp,
- &exynos5_clk_sclk_spi0,
- &exynos5_clk_sclk_spi1,
- &exynos5_clk_sclk_spi2,
- &exynos5_clk_mdout_spi0,
- &exynos5_clk_mdout_spi1,
- &exynos5_clk_mdout_spi2,
- &exynos5_clk_sclk_fimd1,
-};
-
-static struct clk *exynos5_clk_cdev[] = {
- &exynos5_clk_pdma0,
- &exynos5_clk_pdma1,
- &exynos5_clk_mdma1,
- &exynos5_clk_fimd1,
-};
-
-static struct clksrc_clk *exynos5_clksrc_cdev[] = {
- &exynos5_clk_sclk_uart0,
- &exynos5_clk_sclk_uart1,
- &exynos5_clk_sclk_uart2,
- &exynos5_clk_sclk_uart3,
- &exynos5_clk_sclk_mmc0,
- &exynos5_clk_sclk_mmc1,
- &exynos5_clk_sclk_mmc2,
- &exynos5_clk_sclk_mmc3,
-};
-
-static struct clk_lookup exynos5_clk_lookup[] = {
- CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk),
- CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
- CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
- CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
- CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
- CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
- CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
- CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
- CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk),
- CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk),
- CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk),
- CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
- CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
- CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
- CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1),
-};
-
-static unsigned long exynos5_epll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-static struct clk *exynos5_clks[] __initdata = {
- &exynos5_clk_sclk_hdmi27m,
- &exynos5_clk_sclk_hdmiphy,
- &clk_fout_bpll,
- &clk_fout_bpll_div2,
- &clk_fout_cpll,
- &clk_fout_mpll_div2,
- &exynos5_clk_armclk,
-};
-
-static u32 epll_div[][6] = {
- { 192000000, 0, 48, 3, 1, 0 },
- { 180000000, 0, 45, 3, 1, 0 },
- { 73728000, 1, 73, 3, 3, 47710 },
- { 67737600, 1, 90, 4, 3, 20762 },
- { 49152000, 0, 49, 3, 3, 9961 },
- { 45158400, 0, 45, 3, 3, 10381 },
- { 180633600, 0, 45, 3, 1, 10381 },
-};
-
-static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int epll_con, epll_con_k;
- unsigned int i;
- unsigned int tmp;
- unsigned int epll_rate;
- unsigned int locktime;
- unsigned int lockcnt;
-
- /* Return if nothing changed */
- if (clk->rate == rate)
- return 0;
-
- if (clk->parent)
- epll_rate = clk_get_rate(clk->parent);
- else
- epll_rate = clk_ext_xtal_mux.rate;
-
- if (epll_rate != 24000000) {
- pr_err("Invalid Clock : recommended clock is 24MHz.\n");
- return -EINVAL;
- }
-
- epll_con = __raw_readl(EXYNOS5_EPLL_CON0);
- epll_con &= ~(0x1 << 27 | \
- PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
- PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
- PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
- for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
- if (epll_div[i][0] == rate) {
- epll_con_k = epll_div[i][5] << 0;
- epll_con |= epll_div[i][1] << 27;
- epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT;
- epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT;
- epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(epll_div)) {
- printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
- __func__);
- return -EINVAL;
- }
-
- epll_rate /= 1000000;
-
- /* 3000 max_cycls : specification data */
- locktime = 3000 / epll_rate * epll_div[i][3];
- lockcnt = locktime * 10000 / (10000 / epll_rate);
-
- __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK);
-
- __raw_writel(epll_con, EXYNOS5_EPLL_CON0);
- __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1);
-
- do {
- tmp = __raw_readl(EXYNOS5_EPLL_CON0);
- } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT));
-
- clk->rate = rate;
-
- return 0;
-}
-
-static struct clk_ops exynos5_epll_ops = {
- .get_rate = exynos5_epll_get_rate,
- .set_rate = exynos5_epll_set_rate,
-};
-
-static int xtal_rate;
-
-static unsigned long exynos5_fout_apll_get_rate(struct clk *clk)
-{
- return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0));
-}
-
-static struct clk_ops exynos5_fout_apll_ops = {
- .get_rate = exynos5_fout_apll_get_rate,
-};
-
-#ifdef CONFIG_PM
-static int exynos5_clock_suspend(void)
-{
- s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-
- return 0;
-}
-
-static void exynos5_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
-}
-#else
-#define exynos5_clock_suspend NULL
-#define exynos5_clock_resume NULL
-#endif
-
-static struct syscore_ops exynos5_clock_syscore_ops = {
- .suspend = exynos5_clock_suspend,
- .resume = exynos5_clock_resume,
-};
-
-void __init_or_cpufreq exynos5_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long apll;
- unsigned long bpll;
- unsigned long cpll;
- unsigned long mpll;
- unsigned long epll;
- unsigned long vpll;
- unsigned long vpllsrc;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long mout_cdrex;
- unsigned long aclk_400;
- unsigned long aclk_333;
- unsigned long aclk_266;
- unsigned long aclk_200;
- unsigned long aclk_166;
- unsigned long aclk_66;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
-
- xtal_rate = xtal;
-
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0));
- bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0));
- cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0));
- mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0));
- epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0),
- __raw_readl(EXYNOS5_EPLL_CON1));
-
- vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk);
- vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0),
- __raw_readl(EXYNOS5_VPLL_CON1));
-
- clk_fout_apll.ops = &exynos5_fout_apll_ops;
- clk_fout_bpll.rate = bpll;
- clk_fout_bpll_div2.rate = bpll >> 1;
- clk_fout_cpll.rate = cpll;
- clk_fout_mpll.rate = mpll;
- clk_fout_mpll_div2.rate = mpll >> 1;
- clk_fout_epll.rate = epll;
- clk_fout_vpll.rate = vpll;
-
- printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n"
- "M=%ld, E=%ld V=%ld",
- apll, bpll, cpll, mpll, epll, vpll);
-
- armclk = clk_get_rate(&exynos5_clk_armclk);
- mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk);
-
- aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk);
- aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk);
- aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk);
- aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk);
- aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk);
- aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk);
-
- printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n"
- "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n"
- "ACLK166=%ld, ACLK66=%ld\n",
- armclk, mout_cdrex, aclk_400,
- aclk_333, aclk_266, aclk_200,
- aclk_166, aclk_66);
-
-
- clk_fout_epll.ops = &exynos5_epll_ops;
-
- if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
- printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
- clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
-
- clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000);
- clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000);
-
- clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000);
- clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++)
- s3c_set_clksrc(&exynos5_clksrcs[ptr], true);
-}
-
-void __init exynos5_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++)
- s3c_register_clksrc(exynos5_sysclks[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++)
- s3c_register_clksrc(exynos5_sclk_tv[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++)
- s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1);
-
- s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs));
- s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on));
-
- s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++)
- s3c_disable_clocks(exynos5_clk_cdev[ptr], 1);
-
- s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
- s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
- clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup));
-
- register_syscore_ops(&exynos5_clock_syscore_ops);
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 15718da30c45..b35c60059bb8 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -24,6 +24,8 @@
#include <linux/export.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
+#include <linux/clocksource.h>
+#include <linux/clk-provider.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/irqchip/chained_irq.h>
@@ -37,9 +39,9 @@
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
#include <mach/regs-gpio.h>
+#include <mach/irqs.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/sdhci.h>
@@ -65,17 +67,16 @@ static const char name_exynos5440[] = "EXYNOS5440";
static void exynos4_map_io(void);
static void exynos5_map_io(void);
static void exynos5440_map_io(void);
-static void exynos4_init_clocks(int xtal);
-static void exynos5_init_clocks(int xtal);
static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
+unsigned long xxti_f = 0, xusbxti_f = 0;
+
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = EXYNOS4210_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4210,
@@ -83,7 +84,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = EXYNOS4212_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4212,
@@ -91,7 +91,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = EXYNOS4412_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_clocks = exynos4_init_clocks,
.init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
@@ -99,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = EXYNOS5250_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5_map_io,
- .init_clocks = exynos5_init_clocks,
.init = exynos_init,
.name = name_exynos5250,
}, {
@@ -257,11 +255,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
.length = SZ_4K,
.type = MT_DEVICE,
}, {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
.length = SZ_4K,
@@ -402,43 +395,26 @@ static void __init exynos5_map_io(void)
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
}
-static void __init exynos4_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- if (soc_is_exynos4210())
- exynos4210_register_clocks();
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- exynos4212_register_clocks();
-
- exynos4_register_clocks();
- exynos4_setup_clocks();
-}
-
static void __init exynos5440_map_io(void)
{
iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
}
-static void __init exynos5_init_clocks(int xtal)
+void __init exynos_init_time(void)
{
- printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
-
- /* EXYNOS5440 can support only common clock framework */
-
- if (soc_is_exynos5440())
- return;
-
-#ifdef CONFIG_SOC_EXYNOS5250
- s3c24xx_register_baseclocks(xtal);
- s5p_register_clocks(xtal);
-
- exynos5_register_clocks();
- exynos5_setup_clocks();
+ if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
+ of_clk_init(NULL);
+ clocksource_of_init();
+#endif
+ } else {
+ /* todo: remove after migrating legacy E4 platforms to dt */
+#ifdef CONFIG_ARCH_EXYNOS4
+ exynos4_clk_init(NULL);
+ exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
#endif
+ mct_init();
+ }
}
void __init exynos4_init_irq(void)
@@ -824,6 +800,7 @@ static int __init exynos_init_irq_eint(void)
static const struct of_device_id exynos_pinctrl_ids[] = {
{ .compatible = "samsung,exynos4210-pinctrl", },
{ .compatible = "samsung,exynos4x12-pinctrl", },
+ { .compatible = "samsung,exynos5250-pinctrl", },
};
struct device_node *pctrl_np, *wkup_np;
const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
@@ -877,3 +854,30 @@ static int __init exynos_init_irq_eint(void)
return 0;
}
arch_initcall(exynos_init_irq_eint);
+
+static struct resource exynos4_pmu_resource[] = {
+ DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU),
+ DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU1),
+#if defined(CONFIG_SOC_EXYNOS4412)
+ DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU2),
+ DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU3),
+#endif
+};
+
+static struct platform_device exynos4_device_pmu = {
+ .name = "arm-pmu",
+ .num_resources = ARRAY_SIZE(exynos4_pmu_resource),
+ .resource = exynos4_pmu_resource,
+};
+
+static int __init exynos_armpmu_init(void)
+{
+ if (!of_have_populated_dt()) {
+ if (soc_is_exynos4210() || soc_is_exynos4212())
+ exynos4_device_pmu.num_resources = 2;
+ platform_device_register(&exynos4_device_pmu);
+ }
+
+ return 0;
+}
+arch_initcall(exynos_armpmu_init);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 9339bb8954be..cb89ab886950 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,7 +12,11 @@
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
-extern void exynos4_timer_init(void);
+#include <linux/of.h>
+
+extern void mct_init(void);
+void exynos_init_time(void);
+extern unsigned long xxti_f, xusbxti_f;
struct map_desc;
void exynos_init_io(struct map_desc *mach_desc, int size);
@@ -22,6 +26,10 @@ void exynos4_restart(char mode, const char *cmd);
void exynos5_restart(char mode, const char *cmd);
void exynos_init_late(void);
+/* ToDo: remove these after migrating legacy exynos4 platforms to dt */
+void exynos4_clk_init(struct device_node *np);
+void exynos4_clk_register_fixed_ext(unsigned long, unsigned long);
+
#ifdef CONFIG_PM_GENERIC_DOMAINS
int exynos_pm_late_initcall(void);
#else
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 8bd5dde5fc78..c72f59d91fce 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -30,8 +30,6 @@
/* For EXYNOS4 and EXYNOS5 */
-#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12)
-
#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32)
/* For EXYNOS4 SoCs */
@@ -128,7 +126,7 @@
#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107)
#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108)
#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109)
-#define EXYNOS4_IRQ_PMU IRQ_SPI(110)
+#define EXYNOS4_IRQ_POWER_PMU IRQ_SPI(110)
#define EXYNOS4_IRQ_GPS IRQ_SPI(111)
#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113)
@@ -136,6 +134,11 @@
#define EXYNOS4_IRQ_TSI IRQ_SPI(115)
#define EXYNOS4_IRQ_SATA IRQ_SPI(116)
+#define EXYNOS4_IRQ_PMU COMBINER_IRQ(2, 2)
+#define EXYNOS4_IRQ_PMU_CPU1 COMBINER_IRQ(3, 2)
+#define EXYNOS4_IRQ_PMU_CPU2 COMBINER_IRQ(18, 2)
+#define EXYNOS4_IRQ_PMU_CPU3 COMBINER_IRQ(19, 2)
+
#define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4)
#define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4)
@@ -168,7 +171,10 @@
#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
-#define EXYNOS4_MAX_COMBINER_NR 16
+#define EXYNOS4210_MAX_COMBINER_NR 16
+#define EXYNOS4212_MAX_COMBINER_NR 18
+#define EXYNOS4412_MAX_COMBINER_NR 20
+#define EXYNOS4_MAX_COMBINER_NR EXYNOS4412_MAX_COMBINER_NR
#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16
#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9
@@ -233,7 +239,6 @@
#define IRQ_TC EXYNOS4_IRQ_PEN0
#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD
-#define IRQ_PMU EXYNOS4_IRQ_PMU
#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO
#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC
@@ -323,8 +328,6 @@
#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
-#define EXYNOS5_IRQ_MCT_L0 IRQ_SPI(120)
-#define EXYNOS5_IRQ_MCT_L1 IRQ_SPI(121)
#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
@@ -419,8 +422,6 @@
#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4)
#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
-#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
-#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 1df6abbf53b8..7f99b7b187d6 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -65,7 +65,6 @@
#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_SYSTIMER 0x10050000
-#define EXYNOS5_PA_SYSTIMER 0x101C0000
#define EXYNOS4_PA_WATCHDOG 0x10060000
#define EXYNOS5_PA_WATCHDOG 0x101D0000
diff --git a/arch/arm/mach-exynos/include/mach/regs-mct.h b/arch/arm/mach-exynos/include/mach/regs-mct.h
deleted file mode 100644
index 80dd02ad6d61..000000000000
--- a/arch/arm/mach-exynos/include/mach/regs-mct.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/regs-mct.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 MCT configutation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_MCT_H
-#define __ASM_ARCH_REGS_MCT_H __FILE__
-
-#include <mach/map.h>
-
-#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x))
-
-#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
-#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
-#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
-
-#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
-#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
-#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
-
-#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
-
-#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
-#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
-#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
-
-#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
-#define EXYNOS4_MCT_L_MASK (0xffffff00)
-
-#define MCT_L_TCNTB_OFFSET (0x00)
-#define MCT_L_ICNTB_OFFSET (0x08)
-#define MCT_L_TCON_OFFSET (0x20)
-#define MCT_L_INT_CSTAT_OFFSET (0x30)
-#define MCT_L_INT_ENB_OFFSET (0x34)
-#define MCT_L_WSTAT_OFFSET (0x40)
-
-#define MCT_G_TCON_START (1 << 8)
-#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
-#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
-
-#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
-#define MCT_L_TCON_INT_START (1 << 1)
-#define MCT_L_TCON_TIMER_START (1 << 0)
-
-#endif /* __ASM_ARCH_REGS_MCT_H */
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index 2126f3503a3f..5f0f55701374 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -178,7 +178,6 @@ static void __init armlex4210_smsc911x_init(void)
static void __init armlex4210_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(armlex4210_uartcfgs,
ARRAY_SIZE(armlex4210_uartcfgs));
}
@@ -203,6 +202,6 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 3358088c822a..ac27f3cd121f 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -11,121 +11,26 @@
* published by the Free Software Foundation.
*/
+#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/of_fdt.h>
#include <linux/serial_core.h>
+#include <linux/memblock.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
-#include <mach/map.h>
-
-#include <plat/cpu.h>
-#include <plat/regs-serial.h>
+#include <plat/mfc.h>
#include "common.h"
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the Exynos4 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
- "exynos4210-uart.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
- "exynos4210-uart.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2,
- "exynos4210-uart.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3,
- "exynos4210-uart.3", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
- "exynos4-sdhci.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
- "exynos4-sdhci.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
- "exynos4-sdhci.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
- "exynos4-sdhci.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
- "s3c2440-i2c.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
- "s3c2440-i2c.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2),
- "s3c2440-i2c.2", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3),
- "s3c2440-i2c.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4),
- "s3c2440-i2c.4", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5),
- "s3c2440-i2c.5", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6),
- "s3c2440-i2c.6", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7),
- "s3c2440-i2c.7", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0,
- "exynos4210-spi.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1,
- "exynos4210-spi.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2,
- "exynos4210-spi.2", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_MDMA1, "dma-pl330.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU,
- "exynos-tmu", NULL),
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13620000,
- "exynos-sysmmu.0", NULL), /* MFC_L */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13630000,
- "exynos-sysmmu.1", NULL), /* MFC_R */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E20000,
- "exynos-sysmmu.2", NULL), /* TV */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A60000,
- "exynos-sysmmu.3", NULL), /* JPEG */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A30000,
- "exynos-sysmmu.4", NULL), /* ROTATOR */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A20000,
- "exynos-sysmmu.5", NULL), /* FIMC0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A30000,
- "exynos-sysmmu.6", NULL), /* FIMC1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A40000,
- "exynos-sysmmu.7", NULL), /* FIMC2 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11A50000,
- "exynos-sysmmu.8", NULL), /* FIMC3 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12A20000,
- "exynos-sysmmu.9", NULL), /* G2D(4210) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A40000,
- "exynos-sysmmu.9", NULL), /* G2D(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11E20000,
- "exynos-sysmmu.10", NULL), /* FIMD0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12220000,
- "exynos-sysmmu.11", NULL), /* FIMD1(4210) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x12260000,
- "exynos-sysmmu.12", NULL), /* IS0(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x122B0000,
- "exynos-sysmmu.13", NULL), /* IS1(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123B0000,
- "exynos-sysmmu.14", NULL), /* FIMC-LITE0(4x12) */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x123C0000,
- "exynos-sysmmu.15", NULL), /* FIMC-LITE1(4x12) */
- {},
-};
-
static void __init exynos4_dt_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(24000000);
}
static void __init exynos4_dt_machine_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos4_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *exynos4_dt_compat[] __initdata = {
@@ -135,6 +40,18 @@ static char const *exynos4_dt_compat[] __initdata = {
NULL
};
+static void __init exynos4_reserve(void)
+{
+#ifdef CONFIG_S5P_DEV_MFC
+ struct s5p_mfc_dt_meminfo mfc_mem;
+
+ /* Reserve memory for MFC only if it's available */
+ mfc_mem.compatible = "samsung,mfc-v5";
+ if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
+ s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
+ mfc_mem.lsize);
+#endif
+}
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.smp = smp_ops(exynos_smp_ops),
@@ -142,7 +59,8 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
.map_io = exynos4_dt_map_io,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
+ .reserve = exynos4_reserve,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index acaeb14db54b..753b94f3fca7 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -11,151 +11,21 @@
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
-#include <linux/serial_core.h>
#include <linux/memblock.h>
#include <linux/io.h>
+#include <linux/clocksource.h>
#include <asm/mach/arch.h>
-#include <mach/map.h>
#include <mach/regs-pmu.h>
#include <plat/cpu.h>
-#include <plat/regs-serial.h>
#include <plat/mfc.h>
#include "common.h"
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the EXYNOS5 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
- "exynos4210-uart.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
- "exynos4210-uart.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
- "exynos4210-uart.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
- "exynos4210-uart.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(0),
- "s3c2440-i2c.0", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1),
- "s3c2440-i2c.1", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2),
- "s3c2440-i2c.2", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3),
- "s3c2440-i2c.3", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4),
- "s3c2440-i2c.4", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5),
- "s3c2440-i2c.5", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6),
- "s3c2440-i2c.6", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7),
- "s3c2440-i2c.7", NULL),
- OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8),
- "s3c2440-hdmiphy-i2c", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0,
- "dw_mmc.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1,
- "dw_mmc.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2,
- "dw_mmc.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3,
- "dw_mmc.3", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0,
- "exynos4210-spi.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1,
- "exynos4210-spi.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2,
- "exynos4210-spi.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000,
- "exynos5-sata", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000,
- "exynos5-sata-phy", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000,
- "exynos5-sata-phy-i2c", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
- OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0,
- "exynos-gsc.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1,
- "exynos-gsc.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2,
- "exynos-gsc.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3,
- "exynos-gsc.3", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000,
- "exynos5-hdmi", NULL),
- OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000,
- "exynos5-mixer", NULL),
- OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL),
- OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000,
- "exynos-tmu", NULL),
- OF_DEV_AUXDATA("samsung,i2s-v5", 0x03830000,
- "samsung-i2s.0", NULL),
- OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D60000,
- "samsung-i2s.1", NULL),
- OF_DEV_AUXDATA("samsung,i2s-v5", 0x12D70000,
- "samsung-i2s.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11210000,
- "exynos-sysmmu.0", "mfc"), /* MFC_L */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11200000,
- "exynos-sysmmu.1", "mfc"), /* MFC_R */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14650000,
- "exynos-sysmmu.2", NULL), /* TV */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11F20000,
- "exynos-sysmmu.3", "jpeg"), /* JPEG */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x11D40000,
- "exynos-sysmmu.4", NULL), /* ROTATOR */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E80000,
- "exynos-sysmmu.5", "gscl"), /* GSCL0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13E90000,
- "exynos-sysmmu.6", "gscl"), /* GSCL1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EA0000,
- "exynos-sysmmu.7", "gscl"), /* GSCL2 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13EB0000,
- "exynos-sysmmu.8", "gscl"), /* GSCL3 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13260000,
- "exynos-sysmmu.9", NULL), /* FIMC-IS0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x132C0000,
- "exynos-sysmmu.10", NULL), /* FIMC-IS1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x14640000,
- "exynos-sysmmu.11", NULL), /* FIMD1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C40000,
- "exynos-sysmmu.12", NULL), /* FIMC-LITE0 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x13C50000,
- "exynos-sysmmu.13", NULL), /* FIMC-LITE1 */
- OF_DEV_AUXDATA("samsung,exynos-sysmmu", 0x10A60000,
- "exynos-sysmmu.14", NULL), /* G2D */
- {},
-};
-
-static const struct of_dev_auxdata exynos5440_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5440_PA_UART0,
- "exynos4210-uart.0", NULL),
- {},
-};
-
static void __init exynos5_dt_map_io(void)
{
- unsigned long root = of_get_flat_dt_root();
-
exynos_init_io(NULL, 0);
-
- if (of_flat_dt_is_compatible(root, "samsung,exynos5250"))
- s3c24xx_init_clocks(24000000);
}
static void __init exynos5_dt_machine_init(void)
@@ -182,12 +52,7 @@ static void __init exynos5_dt_machine_init(void)
}
}
- if (of_machine_is_compatible("samsung,exynos5250"))
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos5250_auxdata_lookup, NULL);
- else if (of_machine_is_compatible("samsung,exynos5440"))
- of_platform_populate(NULL, of_default_bus_match_table,
- exynos5440_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *exynos5_dt_compat[] __initdata = {
@@ -216,7 +81,7 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
.map_io = exynos5_dt_map_io,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
.reserve = exynos5_reserve,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 2517406e7f56..5c8b2878dbbd 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -1331,8 +1331,9 @@ static struct platform_device *nuri_devices[] __initdata = {
static void __init nuri_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
+ xxti_f = 0;
+ xusbxti_f = 24000000;
}
static void __init nuri_reserve(void)
@@ -1381,7 +1382,7 @@ MACHINE_START(NURI, "NURI")
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &nuri_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index ec42024dd13f..27f03ed5d067 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -755,8 +755,9 @@ static void s5p_tv_setup(void)
static void __init origen_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+ xxti_f = 0;
+ xusbxti_f = 24000000;
}
static void __init origen_power_init(void)
@@ -816,7 +817,7 @@ MACHINE_START(ORIGEN, "ORIGEN")
.map_io = origen_map_io,
.init_machine = origen_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &origen_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index 5df91236dbb4..2c8af9617920 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -323,7 +323,6 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
static void __init smdk4x12_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
}
@@ -377,7 +376,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
.init_irq = exynos4_init_irq,
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
@@ -391,7 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412")
.map_io = smdk4x12_map_io,
.init_machine = smdk4x12_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.restart = exynos4_restart,
.reserve = &smdk4x12_reserve,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 9680e1291065..d95b8cf85253 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -372,8 +372,9 @@ static void s5p_tv_setup(void)
static void __init smdkv310_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
+ xxti_f = 12000000;
+ xusbxti_f = 24000000;
}
static void __init smdkv310_reserve(void)
@@ -424,7 +425,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
.init_irq = exynos4_init_irq,
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
@@ -437,7 +438,7 @@ MACHINE_START(SMDKC210, "SMDKC210")
.map_io = smdkv310_map_io,
.init_machine = smdkv310_machine_init,
.init_late = exynos_init_late,
- .init_time = exynos4_timer_init,
+ .init_time = exynos_init_time,
.reserve = &smdkv310_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index d28c7fbaba2d..327d50d4681d 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -41,7 +41,7 @@
#include <plat/mfc.h>
#include <plat/sdhci.h>
#include <plat/fimc-core.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/camport.h>
#include <mach/map.h>
@@ -1093,9 +1093,10 @@ static struct platform_device *universal_devices[] __initdata = {
static void __init universal_map_io(void)
{
exynos_init_io(NULL, 0);
- s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
- s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
+ xxti_f = 0;
+ xusbxti_f = 24000000;
}
static void s5p_tv_setup(void)
@@ -1153,7 +1154,7 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
.map_io = universal_map_io,
.init_machine = universal_machine_init,
.init_late = exynos_init_late,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.reserve = &universal_reserve,
.restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 2612eeaa5889..a4d4664894e1 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -445,16 +445,23 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 57,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = 61,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = 61,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -606,6 +613,8 @@ static void __init omap_3430sdp_init(void)
board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
sdp3430_display_init();
enable_board_wakeup_source();
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 67447bd4564f..20d6d8189240 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -53,16 +53,23 @@ static void enable_board_wakeup_source(void)
OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 126,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = 61,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 126,
- .reset_gpio_port[1] = 61,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -199,6 +206,8 @@ static void __init omap_sdp_init(void)
board_smc91x_init();
board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
enable_board_wakeup_source();
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 7d3358b2e593..fc53911d0d13 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -47,15 +47,17 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = GPIO_USB_NRESET,
+ .vcc_gpio = GPIO_USB_POWER,
+ .vcc_polarity = 1,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = GPIO_USB_NRESET,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
static struct mtd_partition crane_nand_partitions[] = {
@@ -131,13 +133,7 @@ static void __init am3517_crane_init(void)
return;
}
- ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH,
- "usb_ehci_enable");
- if (ret < 0) {
- pr_err("Can not request GPIO %d\n", GPIO_USB_POWER);
- return;
- }
-
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1);
}
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 1d6c28872505..c29d2e743688 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -273,6 +273,14 @@ static __init void am3517_evm_mcbsp1_init(void)
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 57,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
@@ -281,12 +289,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
#else
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
#endif
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -348,7 +350,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-
static void __init am3517_evm_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -360,6 +361,8 @@ static void __init am3517_evm_init(void)
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
/* DSS */
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index bccd3e51fecb..e0ed8c07fc54 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -418,15 +418,22 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 6,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = OMAP_MAX_GPIO_LINES + 7,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6,
- .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7,
- .reset_gpio_port[2] = -EINVAL
};
static void __init cm_t35_init_usbh(void)
@@ -443,6 +450,7 @@ static void __init cm_t35_init_usbh(void)
msleep(1);
}
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index a66da808cc4a..4eb5e6f2f7f5 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {}
#define HSUSB2_RESET_GPIO (147)
#define USB_HUB_RESET_GPIO (152)
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = HSUSB1_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+ {
+ .port = 2,
+ .reset_gpio = HSUSB2_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = HSUSB1_RESET_GPIO,
- .reset_gpio_port[1] = HSUSB2_RESET_GPIO,
- .reset_gpio_port[2] = -EINVAL,
};
static int __init cm_t3517_init_usbh(void)
@@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void)
msleep(1);
}
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&cm_t3517_ehci_pdata);
return 0;
@@ -324,6 +332,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
.handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3517_init,
.init_late = am35xx_init_late,
- .init_time = omap3_gp_gptimer_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 12d2126a2382..e44b804f75ae 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -436,15 +436,7 @@ static struct platform_device *devkit8000_devices[] __initdata = {
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index e54a48060198..78813b397209 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -140,7 +140,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
- .init_time = omap3_am33xx_gptimer_timer_init,
+ .init_time = omap3_gptimer_timer_init,
.dt_compat = am33xx_boards_compat,
.restart = am33xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index e979d48270c9..b54562d1235e 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -527,26 +527,28 @@ static void __init igep_i2c_init(void)
omap3_pmic_init("twl4030", &igep_twldata);
}
+static struct usbhs_phy_data igep2_phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = IGEP2_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
+static struct usbhs_phy_data igep3_phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = IGEP3_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL,
};
static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
- .reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
@@ -642,8 +644,10 @@ static void __init igep_init(void)
if (machine_is_igep0020()) {
omap_display_init(&igep2_dss_data);
igep2_init_smsc911x();
+ usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
usbhs_init(&igep2_usbhs_bdata);
} else {
+ usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
usbhs_init(&igep3_usbhs_bdata);
}
}
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index fff141330a63..6de78605c0af 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -33,6 +33,7 @@
#include <linux/mtd/nand.h>
#include <linux/mmc/host.h>
#include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
@@ -277,6 +278,21 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = {
static struct gpio_led gpio_leds[];
+/* PHY's VCC regulator might be added later, so flag that we need it */
+static struct nop_usb_xceiv_platform_data hsusb2_phy_data = {
+ .needs_vcc = true,
+};
+
+static struct usbhs_phy_data phy_data[] = {
+ {
+ .port = 2,
+ .reset_gpio = 147,
+ .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */
+ .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */
+ .platform_data = &hsusb2_phy_data,
+ },
+};
+
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -318,9 +334,11 @@ static int beagle_twl_gpio_setup(struct device *dev,
}
dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
- gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
- "nEN_USB_PWR");
+ /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */
+ phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX;
+ phy_data[0].vcc_polarity = beagle_config.usb_pwr_level;
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
return 0;
}
@@ -453,15 +471,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = {
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -543,7 +553,9 @@ static void __init omap3_beagle_init(void)
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
usbhs_init(&usbhs_bdata);
+
board_nand_init(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 233a0d528fcf..4f1bbc3cc29b 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -496,7 +496,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = {
static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */
REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */
- REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
REGULATOR_SUPPLY("vaux2", NULL),
};
@@ -539,17 +539,16 @@ static int __init omap3_evm_i2c_init(void)
return 0;
}
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = -1, /* set at runtime */
+ .vcc_gpio = -EINVAL,
+ },
+};
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
+static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- /* PHY reset GPIO will be runtime programmed based on EVM version */
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -725,7 +724,7 @@ static void __init omap3_evm_init(void)
/* setup EHCI phy reset config */
omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
- usbhs_bdata.reset_gpio_port[1] = 21;
+ phy_data[0].reset_gpio = 21;
/* EVM REV >= E can supply 500mA with EXTVBUS programming */
musb_board_data.power = 500;
@@ -733,10 +732,12 @@ static void __init omap3_evm_init(void)
} else {
/* setup EHCI phy reset on MDC */
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
- usbhs_bdata.reset_gpio_port[1] = 135;
+ phy_data[0].reset_gpio = 135;
}
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3evm_nand_partitions,
ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 2bba362148a0..1004d2aaa68f 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -346,7 +346,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
};
static struct regulator_consumer_supply pandora_usb_phy_supply[] = {
- REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+ REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */
};
/* ads7846 on SPI and 2 nub controllers on I2C */
@@ -561,6 +561,14 @@ fail:
printk(KERN_ERR "wl1251 board initialisation failed\n");
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 16,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
@@ -569,15 +577,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = {
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 16,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -601,7 +601,10 @@ static void __init omap3pandora_init(void)
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
+
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
gpmc_nand_init(&pandora_nand_data, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 495b989f9040..8afbba0923d6 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -357,19 +357,20 @@ static int __init omap3_stalker_i2c_init(void)
#define OMAP3_STALKER_TS_GPIO 175
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 21,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3_stalker_devices[] __initdata = {
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 21,
- .reset_gpio_port[2] = -EINVAL,
};
#ifdef CONFIG_OMAP_MUX
@@ -406,6 +407,8 @@ static void __init omap3_stalker_init(void)
omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL);
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index bcd44fbcd877..7da48bc42bbf 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = 147,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&leds_gpio,
&keys_gpio,
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = 147,
- .reset_gpio_port[2] = -EINVAL
};
static void omap3_touchbook_poweroff(void)
@@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
board_nand_init(omap3touchbook_nand_partitions,
ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index b02c2f00609b..a71ad345f20d 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -31,6 +31,7 @@
#include <linux/ti_wilink_st.h>
#include <linux/usb/musb.h>
#include <linux/usb/phy.h>
+#include <linux/usb/nop-usb-xceiv.h>
#include <linux/wl12xx.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/omap-abe-twl6040.h>
@@ -132,6 +133,22 @@ static struct platform_device btwilink_device = {
.id = -1,
};
+/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */
+static struct nop_usb_xceiv_platform_data hsusb1_phy_data = {
+ /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+ .clk_rate = 19200000,
+};
+
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = GPIO_HUB_NRESET,
+ .vcc_gpio = GPIO_HUB_POWER,
+ .vcc_polarity = 1,
+ .platform_data = &hsusb1_phy_data,
+ },
+};
+
static struct platform_device *panda_devices[] __initdata = {
&leds_gpio,
&wl1271_device,
@@ -142,49 +159,19 @@ static struct platform_device *panda_devices[] __initdata = {
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = false,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
-};
-
-static struct gpio panda_ehci_gpios[] __initdata = {
- { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
- { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
};
static void __init omap4_ehci_init(void)
{
int ret;
- struct clk *phy_ref_clk;
/* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
- phy_ref_clk = clk_get(NULL, "auxclk3_ck");
- if (IS_ERR(phy_ref_clk)) {
- pr_err("Cannot request auxclk3\n");
- return;
- }
- clk_set_rate(phy_ref_clk, 19200000);
- clk_prepare_enable(phy_ref_clk);
-
- /* disable the power to the usb hub prior to init and reset phy+hub */
- ret = gpio_request_array(panda_ehci_gpios,
- ARRAY_SIZE(panda_ehci_gpios));
- if (ret) {
- pr_err("Unable to initialize EHCI power/reset\n");
- return;
- }
-
- gpio_export(GPIO_HUB_POWER, 0);
- gpio_export(GPIO_HUB_NRESET, 0);
- gpio_set_value(GPIO_HUB_NRESET, 1);
+ ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL);
+ if (ret)
+ pr_err("Failed to add main_clk alias to auxclk3_ck\n");
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
-
- /* enable power to hub */
- gpio_set_value(GPIO_HUB_POWER, 1);
}
static struct omap_musb_board_data musb_board_data = {
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 630833235cbc..f9101407cd56 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -457,14 +457,16 @@ static int __init overo_spi_init(void)
return 0;
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = OVERO_GPIO_USBH_NRESET,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -501,6 +503,8 @@ static void __init overo_init(void)
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(NULL);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
overo_spi_init();
overo_init_smsc911x();
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 5e4d4c9fe61a..1a3dd865d8eb 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -92,14 +92,16 @@ static struct mtd_partition zoom_nand_partitions[] = {
},
};
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 2,
+ .reset_gpio = ZOOM3_EHCI_RESET_GPIO,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
- .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = true,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO,
- .reset_gpio_port[2] = -EINVAL,
};
static void __init omap_zoom_init(void)
@@ -109,6 +111,8 @@ static void __init omap_zoom_init(void)
} else if (machine_is_omap_zoom3()) {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
}
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index df00e7580aa7..d555cf2459e1 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -82,8 +82,7 @@ extern void omap2_init_common_infrastructure(void);
extern void omap2_sync32k_timer_init(void);
extern void omap3_sync32k_timer_init(void);
extern void omap3_secure_sync32k_timer_init(void);
-extern void omap3_gp_gptimer_timer_init(void);
-extern void omap3_am33xx_gptimer_timer_init(void);
+extern void omap3_gptimer_timer_init(void);
extern void omap4_local_timer_init(void);
extern void omap5_realtime_timer_init(void);
diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c
index afc1e8c32d6c..d9c27195caf0 100644
--- a/arch/arm/mach-omap2/gpmc-nand.c
+++ b/arch/arm/mach-omap2/gpmc-nand.c
@@ -74,14 +74,6 @@ static int omap2_nand_gpmc_retime(
t.cs_wr_off = gpmc_t->cs_wr_off;
t.wr_cycle = gpmc_t->wr_cycle;
- /* Configure GPMC */
- if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1);
- else
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0);
- gpmc_cs_configure(gpmc_nand_data->cs,
- GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND);
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t);
if (err)
return err;
@@ -115,14 +107,18 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
struct gpmc_timings *gpmc_t)
{
int err = 0;
+ struct gpmc_settings s;
struct device *dev = &gpmc_nand_device.dev;
+ memset(&s, 0, sizeof(struct gpmc_settings));
+
gpmc_nand_device.dev.platform_data = gpmc_nand_data;
err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE,
(unsigned long *)&gpmc_nand_resource[0].start);
if (err < 0) {
- dev_err(dev, "Cannot request GPMC CS\n");
+ dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
+ gpmc_nand_data->cs, err);
return err;
}
@@ -140,11 +136,31 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
dev_err(dev, "Unable to set gpmc timings: %d\n", err);
return err;
}
- }
- /* Enable RD PIN Monitoring Reg */
- if (gpmc_nand_data->dev_ready) {
- gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1);
+ if (gpmc_nand_data->of_node) {
+ gpmc_read_settings_dt(gpmc_nand_data->of_node, &s);
+ } else {
+ s.device_nand = true;
+
+ /* Enable RD PIN Monitoring Reg */
+ if (gpmc_nand_data->dev_ready) {
+ s.wait_on_read = true;
+ s.wait_on_write = true;
+ }
+ }
+
+ if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
+ s.device_width = GPMC_DEVWIDTH_16BIT;
+ else
+ s.device_width = GPMC_DEVWIDTH_8BIT;
+
+ err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s);
+ if (err < 0)
+ goto out_free_cs;
+
+ err = gpmc_configure(GPMC_CONFIG_WP, 0);
+ if (err < 0)
+ goto out_free_cs;
}
gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 0d75889c0a6f..64b5a8346982 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -47,11 +47,23 @@ static struct platform_device gpmc_onenand_device = {
.resource = &gpmc_onenand_resource,
};
-static struct gpmc_timings omap2_onenand_calc_async_timings(void)
+static struct gpmc_settings onenand_async = {
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+};
+
+static struct gpmc_settings onenand_sync = {
+ .burst_read = true,
+ .burst_wrap = true,
+ .burst_len = GPMC_BURST_16,
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+ .wait_pin = 0,
+};
+
+static void omap2_onenand_calc_async_timings(struct gpmc_timings *t)
{
struct gpmc_device_timings dev_t;
- struct gpmc_timings t;
-
const int t_cer = 15;
const int t_avdp = 12;
const int t_aavdh = 7;
@@ -64,7 +76,6 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void)
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000;
dev_t.t_avdp_w = dev_t.t_avdp_r;
dev_t.t_aavdh = t_aavdh * 1000;
@@ -76,19 +87,7 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void)
dev_t.t_wpl = t_wpl * 1000;
dev_t.t_wph = t_wph * 1000;
- gpmc_calc_timings(&t, &dev_t);
-
- return t;
-}
-
-static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
-{
- /* Configure GPMC for asynchronous read */
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_DEVICESIZE_16 |
- GPMC_CONFIG1_MUXADDDATA);
-
- return gpmc_cs_set_timings(cs, t);
+ gpmc_calc_timings(t, &onenand_async, &dev_t);
}
static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
@@ -158,12 +157,11 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
return freq;
}
-static struct gpmc_timings
-omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
- int freq)
+static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t,
+ unsigned int flags,
+ int freq)
{
struct gpmc_device_timings dev_t;
- struct gpmc_timings t;
const int t_cer = 15;
const int t_avdp = 12;
const int t_cez = 20; /* max of t_cez, t_oez */
@@ -172,9 +170,9 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
int div, gpmc_clk_ns;
- if (cfg->flags & ONENAND_SYNC_READ)
+ if (flags & ONENAND_SYNC_READ)
onenand_flags = ONENAND_FLAG_SYNCREAD;
- else if (cfg->flags & ONENAND_SYNC_READWRITE)
+ else if (flags & ONENAND_SYNC_READWRITE)
onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
switch (freq) {
@@ -239,10 +237,11 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
/* Set synchronous read timings */
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
- dev_t.sync_read = true;
+ if (onenand_flags & ONENAND_FLAG_SYNCREAD)
+ onenand_sync.sync_read = true;
if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
- dev_t.sync_write = true;
+ onenand_sync.sync_write = true;
+ onenand_sync.burst_write = true;
} else {
dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000;
dev_t.t_wpl = t_wpl * 1000;
@@ -265,32 +264,7 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
dev_t.cyc_aavdh_oe = 1;
dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period;
- gpmc_calc_timings(&t, &dev_t);
-
- return t;
-}
-
-static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
-{
- unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
- unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
-
- /* Configure GPMC for synchronous read */
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_WRAPBURST_SUPP |
- GPMC_CONFIG1_READMULTIPLE_SUPP |
- (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
- (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
- (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
- GPMC_CONFIG1_PAGE_LEN(2) |
- (cpu_is_omap34xx() ? 0 :
- (GPMC_CONFIG1_WAIT_READ_MON |
- GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
- GPMC_CONFIG1_DEVICESIZE_16 |
- GPMC_CONFIG1_DEVICETYPE_NOR |
- GPMC_CONFIG1_MUXADDDATA);
-
- return gpmc_cs_set_timings(cs, t);
+ gpmc_calc_timings(t, &onenand_sync, &dev_t);
}
static int omap2_onenand_setup_async(void __iomem *onenand_base)
@@ -298,11 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
struct gpmc_timings t;
int ret;
+ if (gpmc_onenand_data->of_node)
+ gpmc_read_settings_dt(gpmc_onenand_data->of_node,
+ &onenand_async);
+
omap2_onenand_set_async_mode(onenand_base);
- t = omap2_onenand_calc_async_timings();
+ omap2_onenand_calc_async_timings(&t);
+
+ ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);
+ if (ret < 0)
+ return ret;
- ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
+ ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
if (ret < 0)
return ret;
@@ -322,9 +304,25 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
set_onenand_cfg(onenand_base);
}
- t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+ if (gpmc_onenand_data->of_node) {
+ gpmc_read_settings_dt(gpmc_onenand_data->of_node,
+ &onenand_sync);
+ } else {
+ /*
+ * FIXME: Appears to be legacy code from initial ONENAND commit.
+ * Unclear what boards this is for and if this can be removed.
+ */
+ if (!cpu_is_omap34xx())
+ onenand_sync.wait_on_read = true;
+ }
- ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
+ omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq);
+
+ ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync);
+ if (ret < 0)
+ return ret;
+
+ ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t);
if (ret < 0)
return ret;
@@ -359,6 +357,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
{
int err;
+ struct device *dev = &gpmc_onenand_device.dev;
gpmc_onenand_data = _onenand_data;
gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
@@ -366,7 +365,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
if (cpu_is_omap24xx() &&
(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
- printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+ dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n");
gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
}
@@ -379,7 +378,8 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
(unsigned long *)&gpmc_onenand_resource.start);
if (err < 0) {
- pr_err("%s: Cannot request GPMC CS\n", __func__);
+ dev_err(dev, "Cannot request GPMC CS %d, error %d\n",
+ gpmc_onenand_data->cs, err);
return;
}
@@ -387,7 +387,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
ONENAND_IO_SIZE - 1;
if (platform_device_register(&gpmc_onenand_device) < 0) {
- pr_err("%s: Unable to register OneNAND device\n", __func__);
+ dev_err(dev, "Unable to register OneNAND device\n");
gpmc_cs_free(gpmc_onenand_data->cs);
return;
}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 11d0b756f098..61a063595e66 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -49,6 +49,10 @@ static struct platform_device gpmc_smc91x_device = {
.resource = gpmc_smc91x_resources,
};
+static struct gpmc_settings smc91x_settings = {
+ .device_width = GPMC_DEVWIDTH_16BIT,
+};
+
/*
* Set the gpmc timings for smc91c96. The timings are taken
* from the data sheet available at:
@@ -67,18 +71,6 @@ static int smc91c96_gpmc_retime(void)
const int t7 = 5; /* Figure 12.4 write */
const int t8 = 5; /* Figure 12.4 write */
const int t20 = 185; /* Figure 12.2 read and 12.4 write */
- u32 l;
-
- l = GPMC_CONFIG1_DEVICESIZE_16;
- if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
- l |= GPMC_CONFIG1_MUXADDDATA;
- if (gpmc_cfg->flags & GPMC_READ_MON)
- l |= GPMC_CONFIG1_WAIT_READ_MON;
- if (gpmc_cfg->flags & GPMC_WRITE_MON)
- l |= GPMC_CONFIG1_WAIT_WRITE_MON;
- if (gpmc_cfg->wait_pin)
- l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
- gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
/*
* FIXME: Calculate the address and data bus muxed timings.
@@ -104,7 +96,7 @@ static int smc91c96_gpmc_retime(void)
dev_t.t_cez_w = t4_w * 1000;
dev_t.t_wr_cycle = (t20 - t3) * 1000;
- gpmc_calc_timings(&t, &dev_t);
+ gpmc_calc_timings(&t, &smc91x_settings, &dev_t);
return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
}
@@ -133,6 +125,18 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ smc91x_settings.mux_add_data = GPMC_MUX_AD;
+ if (gpmc_cfg->flags & GPMC_READ_MON)
+ smc91x_settings.wait_on_read = true;
+ if (gpmc_cfg->flags & GPMC_WRITE_MON)
+ smc91x_settings.wait_on_write = true;
+ if (gpmc_cfg->wait_pin)
+ smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
+ ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
+ if (ret < 0)
+ goto free1;
+
if (gpmc_cfg->retime) {
ret = gpmc_cfg->retime();
if (ret != 0)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 6de31739b45c..ed946df5ad8a 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -26,6 +26,7 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/of_mtd.h>
#include <linux/of_device.h>
#include <linux/mtd/nand.h>
@@ -91,9 +92,7 @@
#define GPMC_CS_SIZE 0x30
#define GPMC_BCH_SIZE 0x10
-#define GPMC_MEM_START 0x00000000
#define GPMC_MEM_END 0x3FFFFFFF
-#define BOOT_ROM_SPACE 0x100000 /* 1MB */
#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
#define GPMC_SECTION_SHIFT 28 /* 128 MB */
@@ -107,6 +106,9 @@
#define GPMC_HAS_WR_ACCESS 0x1
#define GPMC_HAS_WR_DATA_MUX_BUS 0x2
+#define GPMC_HAS_MUX_AAD 0x4
+
+#define GPMC_NR_WAITPINS 4
/* XXX: Only NAND irq has been considered,currently these are the only ones used
*/
@@ -153,6 +155,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
/* Define chip-selects as reserved by default until probe completes */
static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
+static unsigned int gpmc_nr_waitpins;
static struct device *gpmc_dev;
static int gpmc_irq;
static resource_size_t phys_base, mem_size;
@@ -181,7 +184,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val)
__raw_writel(val, reg_addr);
}
-u32 gpmc_cs_read_reg(int cs, int idx)
+static u32 gpmc_cs_read_reg(int cs, int idx)
{
void __iomem *reg_addr;
@@ -190,7 +193,7 @@ u32 gpmc_cs_read_reg(int cs, int idx)
}
/* TODO: Add support for gpmc_fck to clock framework and use it */
-unsigned long gpmc_get_fclk_period(void)
+static unsigned long gpmc_get_fclk_period(void)
{
unsigned long rate = clk_get_rate(gpmc_l3_clk);
@@ -205,7 +208,7 @@ unsigned long gpmc_get_fclk_period(void)
return rate;
}
-unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
{
unsigned long tick_ps;
@@ -215,7 +218,7 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
return (time_ns * 1000 + tick_ps - 1) / tick_ps;
}
-unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
+static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
{
unsigned long tick_ps;
@@ -230,13 +233,6 @@ unsigned int gpmc_ticks_to_ns(unsigned int ticks)
return ticks * gpmc_get_fclk_period() / 1000;
}
-unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns)
-{
- unsigned long ticks = gpmc_ns_to_ticks(time_ns);
-
- return ticks * gpmc_get_fclk_period() / 1000;
-}
-
static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
{
return ticks * gpmc_get_fclk_period();
@@ -405,11 +401,18 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
return 0;
}
-static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
+static int gpmc_cs_enable_mem(int cs, u32 base, u32 size)
{
u32 l;
u32 mask;
+ /*
+ * Ensure that base address is aligned on a
+ * boundary equal to or greater than size.
+ */
+ if (base & (size - 1))
+ return -EINVAL;
+
mask = (1 << GPMC_SECTION_SHIFT) - size;
l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
l &= ~0x3f;
@@ -418,6 +421,8 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
l |= GPMC_CONFIG7_CSVALID;
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+
+ return 0;
}
static void gpmc_cs_disable_mem(int cs)
@@ -448,22 +453,14 @@ static int gpmc_cs_mem_enabled(int cs)
return l & GPMC_CONFIG7_CSVALID;
}
-int gpmc_cs_set_reserved(int cs, int reserved)
+static void gpmc_cs_set_reserved(int cs, int reserved)
{
- if (cs > GPMC_CS_NUM)
- return -ENODEV;
-
gpmc_cs_map &= ~(1 << cs);
gpmc_cs_map |= (reserved ? 1 : 0) << cs;
-
- return 0;
}
-int gpmc_cs_reserved(int cs)
+static bool gpmc_cs_reserved(int cs)
{
- if (cs > GPMC_CS_NUM)
- return -ENODEV;
-
return gpmc_cs_map & (1 << cs);
}
@@ -510,6 +507,39 @@ static int gpmc_cs_delete_mem(int cs)
return r;
}
+/**
+ * gpmc_cs_remap - remaps a chip-select physical base address
+ * @cs: chip-select to remap
+ * @base: physical base address to re-map chip-select to
+ *
+ * Re-maps a chip-select to a new physical base address specified by
+ * "base". Returns 0 on success and appropriate negative error code
+ * on failure.
+ */
+static int gpmc_cs_remap(int cs, u32 base)
+{
+ int ret;
+ u32 old_base, size;
+
+ if (cs > GPMC_CS_NUM)
+ return -ENODEV;
+ gpmc_cs_get_memconf(cs, &old_base, &size);
+ if (base == old_base)
+ return 0;
+ gpmc_cs_disable_mem(cs);
+ ret = gpmc_cs_delete_mem(cs);
+ if (ret < 0)
+ return ret;
+ ret = gpmc_cs_insert_mem(cs, base, size);
+ if (ret < 0)
+ return ret;
+ ret = gpmc_cs_enable_mem(cs, base, size);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
{
struct resource *res = &gpmc_cs_mem[cs];
@@ -535,7 +565,12 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
if (r < 0)
goto out;
- gpmc_cs_enable_mem(cs, res->start, resource_size(res));
+ r = gpmc_cs_enable_mem(cs, res->start, resource_size(res));
+ if (r < 0) {
+ release_resource(res);
+ goto out;
+ }
+
*base = res->start;
gpmc_cs_set_reserved(cs, 1);
out:
@@ -561,16 +596,14 @@ void gpmc_cs_free(int cs)
EXPORT_SYMBOL(gpmc_cs_free);
/**
- * gpmc_cs_configure - write request to configure gpmc
- * @cs: chip select number
+ * gpmc_configure - write request to configure gpmc
* @cmd: command type
* @wval: value to write
* @return status of the operation
*/
-int gpmc_cs_configure(int cs, int cmd, int wval)
+int gpmc_configure(int cmd, int wval)
{
- int err = 0;
- u32 regval = 0;
+ u32 regval;
switch (cmd) {
case GPMC_ENABLE_IRQ:
@@ -590,43 +623,14 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
gpmc_write_reg(GPMC_CONFIG, regval);
break;
- case GPMC_CONFIG_RDY_BSY:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
- if (wval)
- regval |= WR_RD_PIN_MONITORING;
- else
- regval &= ~WR_RD_PIN_MONITORING;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
- case GPMC_CONFIG_DEV_SIZE:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- /* clear 2 target bits */
- regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
-
- /* set the proper value */
- regval |= GPMC_CONFIG1_DEVICESIZE(wval);
-
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
- case GPMC_CONFIG_DEV_TYPE:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
- regval |= GPMC_CONFIG1_DEVICETYPE(wval);
- if (wval == GPMC_DEVICETYPE_NOR)
- regval |= GPMC_CONFIG1_MUXADDDATA;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
default:
- printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
- err = -EINVAL;
+ pr_err("%s: command not supported\n", __func__);
+ return -EINVAL;
}
- return err;
+ return 0;
}
-EXPORT_SYMBOL(gpmc_cs_configure);
+EXPORT_SYMBOL(gpmc_configure);
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
@@ -781,16 +785,16 @@ static void gpmc_mem_exit(void)
}
-static int gpmc_mem_init(void)
+static void gpmc_mem_init(void)
{
- int cs, rc;
- unsigned long boot_rom_space = 0;
+ int cs;
- /* never allocate the first page, to facilitate bug detection;
- * even if we didn't boot from ROM.
+ /*
+ * The first 1MB of GPMC address space is typically mapped to
+ * the internal ROM. Never allocate the first page, to
+ * facilitate bug detection; even if we didn't boot from ROM.
*/
- boot_rom_space = BOOT_ROM_SPACE;
- gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space;
+ gpmc_mem_root.start = SZ_1M;
gpmc_mem_root.end = GPMC_MEM_END;
/* Reserve all regions that has been set up by bootloader */
@@ -800,16 +804,12 @@ static int gpmc_mem_init(void)
if (!gpmc_cs_mem_enabled(cs))
continue;
gpmc_cs_get_memconf(cs, &base, &size);
- rc = gpmc_cs_insert_mem(cs, base, size);
- if (rc < 0) {
- while (--cs >= 0)
- if (gpmc_cs_mem_enabled(cs))
- gpmc_cs_delete_mem(cs);
- return rc;
+ if (gpmc_cs_insert_mem(cs, base, size)) {
+ pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n",
+ __func__, cs, base, base + size);
+ gpmc_cs_disable_mem(cs);
}
}
-
- return 0;
}
static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
@@ -825,9 +825,9 @@ static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
/* XXX: can the cycles be avoided ? */
static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_rd_off */
@@ -880,9 +880,9 @@ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
}
static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_wr_off */
@@ -942,9 +942,9 @@ static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
}
static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_rd_off */
@@ -982,9 +982,9 @@ static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
}
static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool mux)
{
- bool mux = dev_t->mux;
u32 temp;
/* adv_wr_off */
@@ -1054,7 +1054,8 @@ static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t,
}
static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_device_timings *dev_t,
+ bool sync)
{
u32 temp;
@@ -1068,7 +1069,7 @@ static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
gpmc_t->cs_on + dev_t->t_ce_avd);
gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp);
- if (dev_t->sync_write || dev_t->sync_read)
+ if (sync)
gpmc_calc_sync_common_timings(gpmc_t, dev_t);
return 0;
@@ -1103,21 +1104,29 @@ static void gpmc_convert_ps_to_ns(struct gpmc_timings *t)
}
int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
+ struct gpmc_settings *gpmc_s,
+ struct gpmc_device_timings *dev_t)
{
+ bool mux = false, sync = false;
+
+ if (gpmc_s) {
+ mux = gpmc_s->mux_add_data ? true : false;
+ sync = (gpmc_s->sync_read || gpmc_s->sync_write);
+ }
+
memset(gpmc_t, 0, sizeof(*gpmc_t));
- gpmc_calc_common_timings(gpmc_t, dev_t);
+ gpmc_calc_common_timings(gpmc_t, dev_t, sync);
- if (dev_t->sync_read)
- gpmc_calc_sync_read_timings(gpmc_t, dev_t);
+ if (gpmc_s && gpmc_s->sync_read)
+ gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux);
else
- gpmc_calc_async_read_timings(gpmc_t, dev_t);
+ gpmc_calc_async_read_timings(gpmc_t, dev_t, mux);
- if (dev_t->sync_write)
- gpmc_calc_sync_write_timings(gpmc_t, dev_t);
+ if (gpmc_s && gpmc_s->sync_write)
+ gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux);
else
- gpmc_calc_async_write_timings(gpmc_t, dev_t);
+ gpmc_calc_async_write_timings(gpmc_t, dev_t, mux);
/* TODO: remove, see function definition */
gpmc_convert_ps_to_ns(gpmc_t);
@@ -1125,6 +1134,90 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
return 0;
}
+/**
+ * gpmc_cs_program_settings - programs non-timing related settings
+ * @cs: GPMC chip-select to program
+ * @p: pointer to GPMC settings structure
+ *
+ * Programs non-timing related settings for a GPMC chip-select, such as
+ * bus-width, burst configuration, etc. Function should be called once
+ * for each chip-select that is being used and must be called before
+ * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1
+ * register will be initialised to zero by this function. Returns 0 on
+ * success and appropriate negative error code on failure.
+ */
+int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
+{
+ u32 config1;
+
+ if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) {
+ pr_err("%s: invalid width %d!", __func__, p->device_width);
+ return -EINVAL;
+ }
+
+ /* Address-data multiplexing not supported for NAND devices */
+ if (p->device_nand && p->mux_add_data) {
+ pr_err("%s: invalid configuration!\n", __func__);
+ return -EINVAL;
+ }
+
+ if ((p->mux_add_data > GPMC_MUX_AD) ||
+ ((p->mux_add_data == GPMC_MUX_AAD) &&
+ !(gpmc_capability & GPMC_HAS_MUX_AAD))) {
+ pr_err("%s: invalid multiplex configuration!\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Page/burst mode supports lengths of 4, 8 and 16 bytes */
+ if (p->burst_read || p->burst_write) {
+ switch (p->burst_len) {
+ case GPMC_BURST_4:
+ case GPMC_BURST_8:
+ case GPMC_BURST_16:
+ break;
+ default:
+ pr_err("%s: invalid page/burst-length (%d)\n",
+ __func__, p->burst_len);
+ return -EINVAL;
+ }
+ }
+
+ if ((p->wait_on_read || p->wait_on_write) &&
+ (p->wait_pin > gpmc_nr_waitpins)) {
+ pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
+ return -EINVAL;
+ }
+
+ config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1));
+
+ if (p->sync_read)
+ config1 |= GPMC_CONFIG1_READTYPE_SYNC;
+ if (p->sync_write)
+ config1 |= GPMC_CONFIG1_WRITETYPE_SYNC;
+ if (p->wait_on_read)
+ config1 |= GPMC_CONFIG1_WAIT_READ_MON;
+ if (p->wait_on_write)
+ config1 |= GPMC_CONFIG1_WAIT_WRITE_MON;
+ if (p->wait_on_read || p->wait_on_write)
+ config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin);
+ if (p->device_nand)
+ config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND);
+ if (p->mux_add_data)
+ config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data);
+ if (p->burst_read)
+ config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP;
+ if (p->burst_write)
+ config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP;
+ if (p->burst_read || p->burst_write) {
+ config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3);
+ config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0;
+ }
+
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1);
+
+ return 0;
+}
+
#ifdef CONFIG_OF
static struct of_device_id gpmc_dt_ids[] = {
{ .compatible = "ti,omap2420-gpmc" },
@@ -1136,70 +1229,110 @@ static struct of_device_id gpmc_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
+/**
+ * gpmc_read_settings_dt - read gpmc settings from device-tree
+ * @np: pointer to device-tree node for a gpmc child device
+ * @p: pointer to gpmc settings structure
+ *
+ * Reads the GPMC settings for a GPMC child device from device-tree and
+ * stores them in the GPMC settings structure passed. The GPMC settings
+ * structure is initialised to zero by this function and so any
+ * previously stored settings will be cleared.
+ */
+void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
+{
+ memset(p, 0, sizeof(struct gpmc_settings));
+
+ p->sync_read = of_property_read_bool(np, "gpmc,sync-read");
+ p->sync_write = of_property_read_bool(np, "gpmc,sync-write");
+ p->device_nand = of_property_read_bool(np, "gpmc,device-nand");
+ of_property_read_u32(np, "gpmc,device-width", &p->device_width);
+ of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data);
+
+ if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) {
+ p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap");
+ p->burst_read = of_property_read_bool(np, "gpmc,burst-read");
+ p->burst_write = of_property_read_bool(np, "gpmc,burst-write");
+ if (!p->burst_read && !p->burst_write)
+ pr_warn("%s: page/burst-length set but not used!\n",
+ __func__);
+ }
+
+ if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
+ p->wait_on_read = of_property_read_bool(np,
+ "gpmc,wait-on-read");
+ p->wait_on_write = of_property_read_bool(np,
+ "gpmc,wait-on-write");
+ if (!p->wait_on_read && !p->wait_on_write)
+ pr_warn("%s: read/write wait monitoring not enabled!\n",
+ __func__);
+ }
+}
+
static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
struct gpmc_timings *gpmc_t)
{
- u32 val;
+ struct gpmc_bool_timings *p;
+
+ if (!np || !gpmc_t)
+ return;
memset(gpmc_t, 0, sizeof(*gpmc_t));
/* minimum clock period for syncronous mode */
- if (!of_property_read_u32(np, "gpmc,sync-clk", &val))
- gpmc_t->sync_clk = val;
+ of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk);
/* chip select timtings */
- if (!of_property_read_u32(np, "gpmc,cs-on", &val))
- gpmc_t->cs_on = val;
-
- if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val))
- gpmc_t->cs_rd_off = val;
-
- if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val))
- gpmc_t->cs_wr_off = val;
+ of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on);
+ of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off);
+ of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off);
/* ADV signal timings */
- if (!of_property_read_u32(np, "gpmc,adv-on", &val))
- gpmc_t->adv_on = val;
-
- if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val))
- gpmc_t->adv_rd_off = val;
-
- if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val))
- gpmc_t->adv_wr_off = val;
+ of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on);
+ of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off);
+ of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off);
/* WE signal timings */
- if (!of_property_read_u32(np, "gpmc,we-on", &val))
- gpmc_t->we_on = val;
-
- if (!of_property_read_u32(np, "gpmc,we-off", &val))
- gpmc_t->we_off = val;
+ of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on);
+ of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off);
/* OE signal timings */
- if (!of_property_read_u32(np, "gpmc,oe-on", &val))
- gpmc_t->oe_on = val;
-
- if (!of_property_read_u32(np, "gpmc,oe-off", &val))
- gpmc_t->oe_off = val;
+ of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on);
+ of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off);
/* access and cycle timings */
- if (!of_property_read_u32(np, "gpmc,page-burst-access", &val))
- gpmc_t->page_burst_access = val;
-
- if (!of_property_read_u32(np, "gpmc,access", &val))
- gpmc_t->access = val;
-
- if (!of_property_read_u32(np, "gpmc,rd-cycle", &val))
- gpmc_t->rd_cycle = val;
-
- if (!of_property_read_u32(np, "gpmc,wr-cycle", &val))
- gpmc_t->wr_cycle = val;
-
- /* only for OMAP3430 */
- if (!of_property_read_u32(np, "gpmc,wr-access", &val))
- gpmc_t->wr_access = val;
-
- if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val))
- gpmc_t->wr_data_mux_bus = val;
+ of_property_read_u32(np, "gpmc,page-burst-access-ns",
+ &gpmc_t->page_burst_access);
+ of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access);
+ of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle);
+ of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle);
+ of_property_read_u32(np, "gpmc,bus-turnaround-ns",
+ &gpmc_t->bus_turnaround);
+ of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns",
+ &gpmc_t->cycle2cycle_delay);
+ of_property_read_u32(np, "gpmc,wait-monitoring-ns",
+ &gpmc_t->wait_monitoring);
+ of_property_read_u32(np, "gpmc,clk-activation-ns",
+ &gpmc_t->clk_activation);
+
+ /* only applicable to OMAP3+ */
+ of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access);
+ of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns",
+ &gpmc_t->wr_data_mux_bus);
+
+ /* bool timing parameters */
+ p = &gpmc_t->bool_timings;
+
+ p->cycle2cyclediffcsen =
+ of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen");
+ p->cycle2cyclesamecsen =
+ of_property_read_bool(np, "gpmc,cycle2cycle-samecsen");
+ p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay");
+ p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay");
+ p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay");
+ p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay");
+ p->time_para_granularity =
+ of_property_read_bool(np, "gpmc,time-para-granularity");
}
#ifdef CONFIG_MTD_NAND
@@ -1295,6 +1428,81 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev,
}
#endif
+/**
+ * gpmc_probe_generic_child - configures the gpmc for a child device
+ * @pdev: pointer to gpmc platform device
+ * @child: pointer to device-tree node for child device
+ *
+ * Allocates and configures a GPMC chip-select for a child device.
+ * Returns 0 on success and appropriate negative error code on failure.
+ */
+static int gpmc_probe_generic_child(struct platform_device *pdev,
+ struct device_node *child)
+{
+ struct gpmc_settings gpmc_s;
+ struct gpmc_timings gpmc_t;
+ struct resource res;
+ unsigned long base;
+ int ret, cs;
+
+ if (of_property_read_u32(child, "reg", &cs) < 0) {
+ dev_err(&pdev->dev, "%s has no 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ if (of_address_to_resource(child, 0, &res) < 0) {
+ dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ ret = gpmc_cs_request(cs, resource_size(&res), &base);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
+ return ret;
+ }
+
+ /*
+ * FIXME: gpmc_cs_request() will map the CS to an arbitary
+ * location in the gpmc address space. When booting with
+ * device-tree we want the NOR flash to be mapped to the
+ * location specified in the device-tree blob. So remap the
+ * CS to this location. Once DT migration is complete should
+ * just make gpmc_cs_request() map a specific address.
+ */
+ ret = gpmc_cs_remap(cs, res.start);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
+ cs, res.start);
+ goto err;
+ }
+
+ gpmc_read_settings_dt(child, &gpmc_s);
+
+ ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
+ if (ret < 0)
+ goto err;
+
+ ret = gpmc_cs_program_settings(cs, &gpmc_s);
+ if (ret < 0)
+ goto err;
+
+ gpmc_read_timings_dt(child, &gpmc_t);
+ gpmc_cs_set_timings(cs, &gpmc_t);
+
+ if (of_platform_device_create(child, NULL, &pdev->dev))
+ return 0;
+
+ dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+ ret = -ENODEV;
+
+err:
+ gpmc_cs_free(cs);
+
+ return ret;
+}
+
static int gpmc_probe_dt(struct platform_device *pdev)
{
int ret;
@@ -1305,6 +1513,13 @@ static int gpmc_probe_dt(struct platform_device *pdev)
if (!of_id)
return 0;
+ ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins",
+ &gpmc_nr_waitpins);
+ if (ret < 0) {
+ pr_err("%s: number of wait pins not found!\n", __func__);
+ return ret;
+ }
+
for_each_node_by_name(child, "nand") {
ret = gpmc_probe_nand_child(pdev, child);
if (ret < 0) {
@@ -1320,6 +1535,23 @@ static int gpmc_probe_dt(struct platform_device *pdev)
return ret;
}
}
+
+ for_each_node_by_name(child, "nor") {
+ ret = gpmc_probe_generic_child(pdev, child);
+ if (ret < 0) {
+ of_node_put(child);
+ return ret;
+ }
+ }
+
+ for_each_node_by_name(child, "ethernet") {
+ ret = gpmc_probe_generic_child(pdev, child);
+ if (ret < 0) {
+ of_node_put(child);
+ return ret;
+ }
+ }
+
return 0;
}
#else
@@ -1364,18 +1596,27 @@ static int gpmc_probe(struct platform_device *pdev)
gpmc_dev = &pdev->dev;
l = gpmc_read_reg(GPMC_REVISION);
+
+ /*
+ * FIXME: Once device-tree migration is complete the below flags
+ * should be populated based upon the device-tree compatible
+ * string. For now just use the IP revision. OMAP3+ devices have
+ * the wr_access and wr_data_mux_bus register fields. OMAP4+
+ * devices support the addr-addr-data multiplex protocol.
+ *
+ * GPMC IP revisions:
+ * - OMAP24xx = 2.0
+ * - OMAP3xxx = 5.0
+ * - OMAP44xx/54xx/AM335x = 6.0
+ */
if (GPMC_REVISION_MAJOR(l) > 0x4)
gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
+ if (GPMC_REVISION_MAJOR(l) > 0x5)
+ gpmc_capability |= GPMC_HAS_MUX_AAD;
dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
GPMC_REVISION_MINOR(l));
- rc = gpmc_mem_init();
- if (rc < 0) {
- clk_disable_unprepare(gpmc_l3_clk);
- clk_put(gpmc_l3_clk);
- dev_err(gpmc_dev, "failed to reserve memory\n");
- return rc;
- }
+ gpmc_mem_init();
if (gpmc_setup_irq() < 0)
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
@@ -1383,6 +1624,9 @@ static int gpmc_probe(struct platform_device *pdev)
/* Now the GPMC is initialised, unreserve the chip-selects */
gpmc_cs_map = 0;
+ if (!pdev->dev.of_node)
+ gpmc_nr_waitpins = GPMC_NR_WAITPINS;
+
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
clk_disable_unprepare(gpmc_l3_clk);
diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h
index fe0a844d5007..707f6d58edd5 100644
--- a/arch/arm/mach-omap2/gpmc.h
+++ b/arch/arm/mach-omap2/gpmc.h
@@ -58,7 +58,7 @@
#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXADDDATA (1 << 9)
+#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
@@ -73,6 +73,13 @@
#define GPMC_IRQ_FIFOEVENTENABLE 0x01
#define GPMC_IRQ_COUNT_EVENT 0x02
+#define GPMC_BURST_4 4 /* 4 word burst */
+#define GPMC_BURST_8 8 /* 8 word burst */
+#define GPMC_BURST_16 16 /* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
+#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
/* bool type time settings */
struct gpmc_bool_timings {
@@ -178,10 +185,6 @@ struct gpmc_device_timings {
u8 cyc_wpl; /* write deassertion time in cycles */
u32 cyc_iaa; /* initial access time in cycles */
- bool mux; /* address & data muxed */
- bool sync_write;/* synchronous write */
- bool sync_read; /* synchronous read */
-
/* extra delays */
bool ce_xdelay;
bool avd_xdelay;
@@ -189,28 +192,40 @@ struct gpmc_device_timings {
bool we_xdelay;
};
+struct gpmc_settings {
+ bool burst_wrap; /* enables wrap bursting */
+ bool burst_read; /* enables read page/burst mode */
+ bool burst_write; /* enables write page/burst mode */
+ bool device_nand; /* device is NAND */
+ bool sync_read; /* enables synchronous reads */
+ bool sync_write; /* enables synchronous writes */
+ bool wait_on_read; /* monitor wait on reads */
+ bool wait_on_write; /* monitor wait on writes */
+ u32 burst_len; /* page/burst length */
+ u32 device_width; /* device bus width (8 or 16 bit) */
+ u32 mux_add_data; /* multiplex address & data */
+ u32 wait_pin; /* wait-pin to be used */
+};
+
extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t);
+ struct gpmc_settings *gpmc_s,
+ struct gpmc_device_timings *dev_t);
extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
extern int gpmc_get_client_irq(unsigned irq_config);
-extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
-extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
-extern unsigned long gpmc_get_fclk_period(void);
extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern u32 gpmc_cs_read_reg(int cs, int idx);
extern int gpmc_calc_divider(unsigned int sync_clk);
extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
-extern int gpmc_cs_set_reserved(int cs, int reserved);
-extern int gpmc_cs_reserved(int cs);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
-extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_configure(int cmd, int wval);
+extern void gpmc_read_settings_dt(struct device_node *np,
+ struct gpmc_settings *p);
#endif
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 63e6384fa72e..f12aa6c15da4 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -57,16 +57,6 @@
#include "common.h"
#include "powerdomain.h"
-/* Parent clocks, eventually these will come from the clock framework */
-
-#define OMAP2_MPU_SOURCE "sys_ck"
-#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE
-#define OMAP4_MPU_SOURCE "sys_clkin_ck"
-#define OMAP5_MPU_SOURCE "sys_clkin"
-#define OMAP2_32K_SOURCE "func_32k_ck"
-#define OMAP3_32K_SOURCE "omap_32k_fck"
-#define OMAP4_32K_SOURCE "sys_32k_ck"
-
#define REALTIME_COUNTER_BASE 0x48243200
#define INCREMENTER_NUMERATOR_OFFSET 0x10
#define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14
@@ -130,7 +120,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
}
static struct clock_event_device clockevent_gpt = {
- .name = "gp_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 300,
.set_next_event = omap2_gp_timer_set_next_event,
@@ -171,6 +160,12 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
if (property && !of_get_property(np, property, NULL))
continue;
+ if (!property && (of_get_property(np, "ti,timer-alwon", NULL) ||
+ of_get_property(np, "ti,timer-dsp", NULL) ||
+ of_get_property(np, "ti,timer-pwm", NULL) ||
+ of_get_property(np, "ti,timer-secure", NULL)))
+ continue;
+
of_add_property(np, &device_disabled);
return np;
}
@@ -215,16 +210,17 @@ static u32 __init omap_dm_timer_get_errata(void)
}
static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
- int gptimer_id,
- const char *fck_source,
- const char *property,
- int posted)
+ const char *fck_source,
+ const char *property,
+ const char **timer_name,
+ int posted)
{
char name[10]; /* 10 = sizeof("gptXX_Xck0") */
const char *oh_name;
struct device_node *np;
struct omap_hwmod *oh;
struct resource irq, mem;
+ struct clk *src;
int r = 0;
if (of_have_populated_dt()) {
@@ -244,10 +240,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
of_node_put(np);
} else {
- if (omap_dm_timer_reserve_systimer(gptimer_id))
+ if (omap_dm_timer_reserve_systimer(timer->id))
return -ENODEV;
- sprintf(name, "timer%d", gptimer_id);
+ sprintf(name, "timer%d", timer->id);
oh_name = name;
}
@@ -255,6 +251,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
if (!oh)
return -ENODEV;
+ *timer_name = oh->name;
+
if (!of_have_populated_dt()) {
r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL,
&irq);
@@ -277,24 +275,24 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer,
/* After the dmtimer is using hwmod these clocks won't be needed */
timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh));
if (IS_ERR(timer->fclk))
- return -ENODEV;
+ return PTR_ERR(timer->fclk);
- /* FIXME: Need to remove hard-coded test on timer ID */
- if (gptimer_id != 12) {
- struct clk *src;
-
- src = clk_get(NULL, fck_source);
- if (IS_ERR(src)) {
- r = -EINVAL;
- } else {
- r = clk_set_parent(timer->fclk, src);
- if (r < 0)
- pr_warn("%s: %s cannot set source\n",
- __func__, oh->name);
+ src = clk_get(NULL, fck_source);
+ if (IS_ERR(src))
+ return PTR_ERR(src);
+
+ if (clk_get_parent(timer->fclk) != src) {
+ r = clk_set_parent(timer->fclk, src);
+ if (r < 0) {
+ pr_warn("%s: %s cannot set source\n", __func__,
+ oh->name);
clk_put(src);
+ return r;
}
}
+ clk_put(src);
+
omap_hwmod_setup_one(oh_name);
omap_hwmod_enable(oh);
__omap_dm_timer_init_regs(timer);
@@ -318,6 +316,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
{
int res;
+ clkev.id = gptimer_id;
clkev.errata = omap_dm_timer_get_errata();
/*
@@ -327,8 +326,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
*/
__omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767);
- res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property,
- OMAP_TIMER_POSTED);
+ res = omap_dm_timer_init_one(&clkev, fck_source, property,
+ &clockevent_gpt.name, OMAP_TIMER_POSTED);
BUG_ON(res);
omap2_gp_timer_irq.dev_id = &clkev;
@@ -342,8 +341,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
3, /* Timer internal resynch latency */
0xffffffff);
- pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
- gptimer_id, clkev.rate);
+ pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name,
+ clkev.rate);
}
/* Clocksource code */
@@ -360,7 +359,6 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs)
}
static struct clocksource clocksource_gpt = {
- .name = "gp_timer",
.rating = 300,
.read = clocksource_read_cycles,
.mask = CLOCKSOURCE_MASK(32),
@@ -443,13 +441,16 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void)
}
static void __init omap2_gptimer_clocksource_init(int gptimer_id,
- const char *fck_source)
+ const char *fck_source,
+ const char *property)
{
int res;
+ clksrc.id = gptimer_id;
clksrc.errata = omap_dm_timer_get_errata();
- res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL,
+ res = omap_dm_timer_init_one(&clksrc, fck_source, property,
+ &clocksource_gpt.name,
OMAP_TIMER_NONPOSTED);
BUG_ON(res);
@@ -462,8 +463,8 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id,
pr_err("Could not register clocksource %s\n",
clocksource_gpt.name);
else
- pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
- gptimer_id, clksrc.rate);
+ pr_info("OMAP clocksource: %s at %lu Hz\n",
+ clocksource_gpt.name, clksrc.rate);
}
#ifdef CONFIG_SOC_HAS_REALTIME_COUNTER
@@ -488,7 +489,7 @@ static void __init realtime_counter_init(void)
pr_err("%s: ioremap failed\n", __func__);
return;
}
- sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE);
+ sys_clk = clk_get(NULL, "sys_clkin");
if (IS_ERR(sys_clk)) {
pr_err("%s: failed to get system clock handle\n", __func__);
iounmap(base);
@@ -545,53 +546,52 @@ static inline void __init realtime_counter_init(void)
#endif
#define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
- clksrc_nr, clksrc_src) \
+ clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_gptimer_timer_init(void) \
{ \
- if (omap_clk_init) \
- omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
- omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \
+ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
+ clksrc_prop); \
}
#define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \
- clksrc_nr, clksrc_src) \
+ clksrc_nr, clksrc_src, clksrc_prop) \
void __init omap##name##_sync32k_timer_init(void) \
{ \
- if (omap_clk_init) \
- omap_clk_init(); \
omap_dmtimer_init(); \
omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \
/* Enable the use of clocksource="gp_timer" kernel parameter */ \
if (use_gptimer_clksrc) \
- omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\
+ omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \
+ clksrc_prop); \
else \
omap2_sync32k_clocksource_init(); \
}
#ifdef CONFIG_ARCH_OMAP2
-OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP2_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "timer_sys_ck", NULL);
#endif /* CONFIG_ARCH_OMAP2 */
#ifdef CONFIG_ARCH_OMAP3
-OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP3_MPU_SOURCE);
-OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure",
- 2, OMAP3_MPU_SOURCE);
-OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon",
- 2, OMAP3_MPU_SOURCE);
+OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "timer_sys_ck", NULL);
+OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure",
+ 2, "timer_sys_ck", NULL);
#endif /* CONFIG_ARCH_OMAP3 */
-#ifdef CONFIG_SOC_AM33XX
-OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
- 2, OMAP4_MPU_SOURCE);
-#endif /* CONFIG_SOC_AM33XX */
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX)
+OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL,
+ 1, "timer_sys_ck", "ti,timer-alwon");
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon",
+ 2, "sys_clkin_ck", NULL);
+#endif
#ifdef CONFIG_ARCH_OMAP4
-OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP4_MPU_SOURCE);
#ifdef CONFIG_LOCAL_TIMERS
static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
void __init omap4_local_timer_init(void)
@@ -620,13 +620,11 @@ void __init omap4_local_timer_init(void)
#endif /* CONFIG_ARCH_OMAP4 */
#ifdef CONFIG_SOC_OMAP5
-OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
- 2, OMAP5_MPU_SOURCE);
void __init omap5_realtime_timer_init(void)
{
int err;
- omap5_sync32k_timer_init();
+ omap4_sync32k_timer_init();
realtime_counter_init();
err = arch_timer_of_register();
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 5706bdccf45e..aa27d7f5cbb7 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -22,8 +22,12 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
-
-#include <asm/io.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/usb/phy.h>
#include "soc.h"
#include "omap_device.h"
@@ -526,3 +530,155 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata)
}
#endif
+
+/* Template for PHY regulators */
+static struct fixed_voltage_config hsusb_reg_config = {
+ /* .supply_name filled later */
+ .microvolts = 3300000,
+ .gpio = -1, /* updated later */
+ .startup_delay = 70000, /* 70msec */
+ .enable_high = 1, /* updated later */
+ .enabled_at_boot = 0, /* keep in RESET */
+ /* .init_data filled later */
+};
+
+static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */
+static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */
+
+/**
+ * usbhs_add_regulator - Add a gpio based fixed voltage regulator device
+ * @name: name for the regulator
+ * @dev_id: device id of the device this regulator supplies power to
+ * @dev_supply: supply name that the device expects
+ * @gpio: GPIO number
+ * @polarity: 1 - Active high, 0 - Active low
+ */
+static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply,
+ int gpio, int polarity)
+{
+ struct regulator_consumer_supply *supplies;
+ struct regulator_init_data *reg_data;
+ struct fixed_voltage_config *config;
+ struct platform_device *pdev;
+ int ret;
+
+ supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
+ if (!supplies)
+ return -ENOMEM;
+
+ supplies->supply = dev_supply;
+ supplies->dev_name = dev_id;
+
+ reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
+ if (!reg_data)
+ return -ENOMEM;
+
+ reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
+ reg_data->consumer_supplies = supplies;
+ reg_data->num_consumer_supplies = 1;
+
+ config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
+ GFP_KERNEL);
+ if (!config)
+ return -ENOMEM;
+
+ config->supply_name = name;
+ config->gpio = gpio;
+ config->enable_high = polarity;
+ config->init_data = reg_data;
+
+ /* create a regulator device */
+ pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->id = PLATFORM_DEVID_AUTO;
+ pdev->name = reg_name;
+ pdev->dev.platform_data = config;
+
+ ret = platform_device_register(pdev);
+ if (ret)
+ pr_err("%s: Failed registering regulator %s for %s\n",
+ __func__, name, dev_id);
+
+ return ret;
+}
+
+int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
+{
+ char *rail_name;
+ int i, len;
+ struct platform_device *pdev;
+ char *phy_id;
+
+ /* the phy_id will be something like "nop_usb_xceiv.1" */
+ len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
+
+ for (i = 0; i < num_phys; i++) {
+
+ if (!phy->port) {
+ pr_err("%s: Invalid port 0. Must start from 1\n",
+ __func__);
+ continue;
+ }
+
+ /* do we need a NOP PHY device ? */
+ if (!gpio_is_valid(phy->reset_gpio) &&
+ !gpio_is_valid(phy->vcc_gpio))
+ continue;
+
+ /* create a NOP PHY device */
+ pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
+ if (!pdev)
+ return -ENOMEM;
+
+ pdev->id = phy->port;
+ pdev->name = nop_name;
+ pdev->dev.platform_data = phy->platform_data;
+
+ phy_id = kmalloc(len, GFP_KERNEL);
+ if (!phy_id)
+ return -ENOMEM;
+
+ scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
+ pdev->id);
+
+ if (platform_device_register(pdev)) {
+ pr_err("%s: Failed to register device %s\n",
+ __func__, phy_id);
+ continue;
+ }
+
+ usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id);
+
+ /* Do we need RESET regulator ? */
+ if (gpio_is_valid(phy->reset_gpio)) {
+
+ rail_name = kmalloc(13, GFP_KERNEL);
+ if (!rail_name)
+ return -ENOMEM;
+
+ scnprintf(rail_name, 13, "hsusb%d_reset", phy->port);
+
+ usbhs_add_regulator(rail_name, phy_id, "reset",
+ phy->reset_gpio, 1);
+ }
+
+ /* Do we need VCC regulator ? */
+ if (gpio_is_valid(phy->vcc_gpio)) {
+
+ rail_name = kmalloc(13, GFP_KERNEL);
+ if (!rail_name)
+ return -ENOMEM;
+
+ scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port);
+
+ usbhs_add_regulator(rail_name, phy_id, "vcc",
+ phy->vcc_gpio, phy->vcc_polarity);
+ }
+
+ phy++;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index c5a3c6f9504e..e832bc7b8e2d 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/err.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/errno.h>
@@ -26,6 +27,24 @@
static u8 async_cs, sync_cs;
static unsigned refclk_psec;
+static struct gpmc_settings tusb_async = {
+ .wait_on_read = true,
+ .wait_on_write = true,
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+};
+
+static struct gpmc_settings tusb_sync = {
+ .burst_read = true,
+ .burst_write = true,
+ .sync_read = true,
+ .sync_write = true,
+ .wait_on_read = true,
+ .wait_on_write = true,
+ .burst_len = GPMC_BURST_16,
+ .device_width = GPMC_DEVWIDTH_16BIT,
+ .mux_add_data = GPMC_MUX_AD,
+};
/* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */
@@ -37,8 +56,6 @@ static int tusb_set_async_mode(unsigned sysclk_ps)
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
-
dev_t.t_ceasu = 8 * 1000;
dev_t.t_avdasu = t_acsnh_advnh - 7000;
dev_t.t_ce_avd = 1000;
@@ -52,7 +69,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps)
dev_t.t_wpl = 300;
dev_t.cyc_aavdh_we = 1;
- gpmc_calc_timings(&t, &dev_t);
+ gpmc_calc_timings(&t, &tusb_async, &dev_t);
return gpmc_cs_set_timings(async_cs, &t);
}
@@ -65,10 +82,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
memset(&dev_t, 0, sizeof(dev_t));
- dev_t.mux = true;
- dev_t.sync_read = true;
- dev_t.sync_write = true;
-
dev_t.clk = 11100;
dev_t.t_bacc = 1000;
dev_t.t_ces = 1000;
@@ -84,7 +97,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps)
dev_t.cyc_wpl = 6;
dev_t.t_ce_rdyz = 7000;
- gpmc_calc_timings(&t, &dev_t);
+ gpmc_calc_timings(&t, &tusb_sync, &dev_t);
return gpmc_cs_set_timings(sync_cs, &t);
}
@@ -165,18 +178,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
return status;
}
tusb_resources[0].end = tusb_resources[0].start + 0x9ff;
+ tusb_async.wait_pin = waitpin;
async_cs = async;
- gpmc_cs_write_reg(async, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_PAGE_LEN(2)
- | GPMC_CONFIG1_WAIT_READ_MON
- | GPMC_CONFIG1_WAIT_WRITE_MON
- | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
- | GPMC_CONFIG1_READTYPE_ASYNC
- | GPMC_CONFIG1_WRITETYPE_ASYNC
- | GPMC_CONFIG1_DEVICESIZE_16
- | GPMC_CONFIG1_DEVICETYPE_NOR
- | GPMC_CONFIG1_MUXADDDATA);
+ status = gpmc_cs_program_settings(async_cs, &tusb_async);
+ if (status < 0)
+ return status;
/* SYNC region, primarily for DMA */
status = gpmc_cs_request(sync, SZ_16M, (unsigned long *)
@@ -186,21 +193,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
return status;
}
tusb_resources[1].end = tusb_resources[1].start + 0x9ff;
+ tusb_sync.wait_pin = waitpin;
sync_cs = sync;
- gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_READMULTIPLE_SUPP
- | GPMC_CONFIG1_READTYPE_SYNC
- | GPMC_CONFIG1_WRITEMULTIPLE_SUPP
- | GPMC_CONFIG1_WRITETYPE_SYNC
- | GPMC_CONFIG1_PAGE_LEN(2)
- | GPMC_CONFIG1_WAIT_READ_MON
- | GPMC_CONFIG1_WAIT_WRITE_MON
- | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin)
- | GPMC_CONFIG1_DEVICESIZE_16
- | GPMC_CONFIG1_DEVICETYPE_NOR
- | GPMC_CONFIG1_MUXADDDATA
- /* fclk divider gets set later */
- );
+
+ status = gpmc_cs_program_settings(sync_cs, &tusb_sync);
+ if (status < 0)
+ return status;
/* IRQ */
status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq");
diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h
index 3319f5cf47a3..e7261ebcf7b0 100644
--- a/arch/arm/mach-omap2/usb.h
+++ b/arch/arm/mach-omap2/usb.h
@@ -53,8 +53,17 @@
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
+struct usbhs_phy_data {
+ int port; /* 1 indexed port number */
+ int reset_gpio;
+ int vcc_gpio;
+ bool vcc_polarity; /* 1 active high, 0 active low */
+ void *platform_data;
+};
+
extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usbhs_init(struct usbhs_omap_platform_data *pdata);
+extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys);
extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 8d5fa6ece014..f2f7088bfd22 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -30,6 +30,7 @@ config CPU_S3C2410
select S3C2410_CLOCK
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2410 and S3C2410A family from the S3C24XX line
of Samsung Mobile CPUs.
@@ -40,6 +41,7 @@ config CPU_S3C2412
select CPU_LLSERIAL_S3C2440
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
+ select SAMSUNG_HRT
help
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
@@ -51,6 +53,7 @@ config CPU_S3C2416
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2416 SoC from the S3C24XX line
@@ -61,6 +64,7 @@ config CPU_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2440_DMA if S3C24XX_DMA
+ select SAMSUNG_HRT
help
Support for S3C2440 Samsung Mobile CPU based systems.
@@ -70,6 +74,7 @@ config CPU_S3C2442
select CPU_LLSERIAL_S3C2440
select S3C2410_CLOCK
select S3C2410_PM if PM
+ select SAMSUNG_HRT
help
Support for S3C2442 Samsung Mobile CPU based systems.
@@ -84,6 +89,7 @@ config CPU_S3C2443
select S3C2443_COMMON
select S3C2443_DMA if S3C24XX_DMA
select SAMSUNG_CLKSRC
+ select SAMSUNG_HRT
help
Support for the S3C2443 SoC from the S3C24XX line
@@ -395,6 +401,7 @@ config S3C2412_DMA
config S3C2412_PM
bool
select S3C2412_PM_SLEEP
+ select SAMSUNG_WAKEMASK
help
Internal config node to apply S3C2412 power management
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index af53d27d5c36..6f46ecfc8396 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -14,7 +14,7 @@ obj- :=
# core
-obj-y += common.o irq.o
+obj-y += common.o
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
obj-$(CONFIG_S3C2410_CPUFREQ) += cpufreq-s3c2410.o
@@ -22,7 +22,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o
obj-$(CONFIG_S3C2412_CPUFREQ) += cpufreq-s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
@@ -31,9 +31,9 @@ obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock-s3c2416.o
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
-obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440) += s3c2440.o clock-s3c2440.o
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
-obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X) += s3c244x.o clock-s3c244x.o
obj-$(CONFIG_S3C2440_CPUFREQ) += cpufreq-s3c2440.o
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 8a2b4137ddb6..307c3714be55 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -21,6 +21,7 @@ extern void s3c2410_map_io(void);
extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c2410_init_clocks(int xtal);
extern void s3c2410_restart(char mode, const char *cmd);
+extern void s3c2410_init_irq(void);
#else
#define s3c2410_init_clocks NULL
#define s3c2410_init_uarts NULL
@@ -36,6 +37,7 @@ extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
extern void s3c2412_init_clocks(int xtal);
extern int s3c2412_baseclk_add(void);
extern void s3c2412_restart(char mode, const char *cmd);
+extern void s3c2412_init_irq(void);
#else
#define s3c2412_init_clocks NULL
#define s3c2412_init_uarts NULL
@@ -73,6 +75,7 @@ extern void s3c244x_restart(char mode, const char *cmd);
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_init(void);
extern void s3c2440_map_io(void);
+extern void s3c2440_init_irq(void);
#else
#define s3c2440_init NULL
#define s3c2440_map_io NULL
@@ -81,6 +84,7 @@ extern void s3c2440_map_io(void);
#ifdef CONFIG_CPU_S3C2442
extern int s3c2442_init(void);
extern void s3c2442_map_io(void);
+extern void s3c2442_init_irq(void);
#else
#define s3c2442_init NULL
#define s3c2442_map_io NULL
diff --git a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S b/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
deleted file mode 100644
index 6a21beeba1da..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for S3C2410-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
-/* We have a problem that the INTOFFSET register does not always
- * show one interrupt. Occasionally we get two interrupts through
- * the prioritiser, and this causes the INTOFFSET register to show
- * what looks like the logical-or of the two interrupt numbers.
- *
- * Thanks to Klaus, Shannon, et al for helping to debug this problem
-*/
-
-#define INTPND (0x10)
-#define INTOFFSET (0x14)
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- mov \base, #S3C24XX_VA_IRQ
-
- @@ try the interrupt offset register, since it is there
-
- ldr \irqstat, [\base, #INTPND ]
- teq \irqstat, #0
- beq 1002f
- ldr \irqnr, [\base, #INTOFFSET ]
- mov \tmp, #1
- tst \irqstat, \tmp, lsl \irqnr
- bne 1001f
-
- @@ the number specified is not a valid irq, so try
- @@ and work it out for ourselves
-
- mov \irqnr, #0 @@ start here
-
- @@ work out which irq (if any) we got
-
- movs \tmp, \irqstat, lsl#16
- addeq \irqnr, \irqnr, #16
- moveq \irqstat, \irqstat, lsr#16
- tst \irqstat, #0xff
- addeq \irqnr, \irqnr, #8
- moveq \irqstat, \irqstat, lsr#8
- tst \irqstat, #0xf
- addeq \irqnr, \irqnr, #4
- moveq \irqstat, \irqstat, lsr#4
- tst \irqstat, #0x3
- addeq \irqnr, \irqnr, #2
- moveq \irqstat, \irqstat, lsr#2
- tst \irqstat, #0x1
- addeq \irqnr, \irqnr, #1
-
- @@ we have the value
-1001:
- adds \irqnr, \irqnr, #IRQ_EINT0
-1002:
- @@ exit here, Z flag unset if IRQ
-
- .endm
diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h
index 1e73f5fa8659..b6dd4cb5a2ec 100644
--- a/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h
@@ -59,49 +59,53 @@
#define IRQ_ADCPARENT S3C2410_IRQ(31)
/* interrupts generated from the external interrupts sources */
-#define IRQ_EINT4 S3C2410_IRQ(32) /* 48 */
-#define IRQ_EINT5 S3C2410_IRQ(33)
-#define IRQ_EINT6 S3C2410_IRQ(34)
-#define IRQ_EINT7 S3C2410_IRQ(35)
-#define IRQ_EINT8 S3C2410_IRQ(36)
-#define IRQ_EINT9 S3C2410_IRQ(37)
-#define IRQ_EINT10 S3C2410_IRQ(38)
-#define IRQ_EINT11 S3C2410_IRQ(39)
-#define IRQ_EINT12 S3C2410_IRQ(40)
-#define IRQ_EINT13 S3C2410_IRQ(41)
-#define IRQ_EINT14 S3C2410_IRQ(42)
-#define IRQ_EINT15 S3C2410_IRQ(43)
-#define IRQ_EINT16 S3C2410_IRQ(44)
-#define IRQ_EINT17 S3C2410_IRQ(45)
-#define IRQ_EINT18 S3C2410_IRQ(46)
-#define IRQ_EINT19 S3C2410_IRQ(47)
-#define IRQ_EINT20 S3C2410_IRQ(48) /* 64 */
-#define IRQ_EINT21 S3C2410_IRQ(49)
-#define IRQ_EINT22 S3C2410_IRQ(50)
-#define IRQ_EINT23 S3C2410_IRQ(51)
+#define IRQ_EINT0_2412 S3C2410_IRQ(32)
+#define IRQ_EINT1_2412 S3C2410_IRQ(33)
+#define IRQ_EINT2_2412 S3C2410_IRQ(34)
+#define IRQ_EINT3_2412 S3C2410_IRQ(35)
+#define IRQ_EINT4 S3C2410_IRQ(36) /* 52 */
+#define IRQ_EINT5 S3C2410_IRQ(37)
+#define IRQ_EINT6 S3C2410_IRQ(38)
+#define IRQ_EINT7 S3C2410_IRQ(39)
+#define IRQ_EINT8 S3C2410_IRQ(40)
+#define IRQ_EINT9 S3C2410_IRQ(41)
+#define IRQ_EINT10 S3C2410_IRQ(42)
+#define IRQ_EINT11 S3C2410_IRQ(43)
+#define IRQ_EINT12 S3C2410_IRQ(44)
+#define IRQ_EINT13 S3C2410_IRQ(45)
+#define IRQ_EINT14 S3C2410_IRQ(46)
+#define IRQ_EINT15 S3C2410_IRQ(47)
+#define IRQ_EINT16 S3C2410_IRQ(48)
+#define IRQ_EINT17 S3C2410_IRQ(49)
+#define IRQ_EINT18 S3C2410_IRQ(50)
+#define IRQ_EINT19 S3C2410_IRQ(51)
+#define IRQ_EINT20 S3C2410_IRQ(52) /* 68 */
+#define IRQ_EINT21 S3C2410_IRQ(53)
+#define IRQ_EINT22 S3C2410_IRQ(54)
+#define IRQ_EINT23 S3C2410_IRQ(55)
#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT4 + 4)
#define IRQ_EINT(x) (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
-#define IRQ_LCD_FIFO S3C2410_IRQ(52)
-#define IRQ_LCD_FRAME S3C2410_IRQ(53)
+#define IRQ_LCD_FIFO S3C2410_IRQ(56)
+#define IRQ_LCD_FRAME S3C2410_IRQ(57)
/* IRQs for the interal UARTs, and ADC
* these need to be ordered in number of appearance in the
* SUBSRC mask register
*/
-#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+54)
+#define S3C2410_IRQSUB(x) S3C2410_IRQ((x)+58)
-#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 70 */
+#define IRQ_S3CUART_RX0 S3C2410_IRQSUB(0) /* 74 */
#define IRQ_S3CUART_TX0 S3C2410_IRQSUB(1)
#define IRQ_S3CUART_ERR0 S3C2410_IRQSUB(2)
-#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 73 */
+#define IRQ_S3CUART_RX1 S3C2410_IRQSUB(3) /* 77 */
#define IRQ_S3CUART_TX1 S3C2410_IRQSUB(4)
#define IRQ_S3CUART_ERR1 S3C2410_IRQSUB(5)
-#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 76 */
+#define IRQ_S3CUART_RX2 S3C2410_IRQSUB(6) /* 80 */
#define IRQ_S3CUART_TX2 S3C2410_IRQSUB(7)
#define IRQ_S3CUART_ERR2 S3C2410_IRQSUB(8)
@@ -136,7 +140,7 @@
/* second interrupt-register of s3c2416/s3c2450 */
-#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 54 + 29)
+#define S3C2416_IRQ(x) S3C2410_IRQ((x) + 58 + 29)
#define IRQ_S3C2416_2D S3C2416_IRQ(0)
#define IRQ_S3C2416_IIC1 S3C2416_IRQ(1)
#define IRQ_S3C2416_RESERVED2 S3C2416_IRQ(2)
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
deleted file mode 100644
index 67d763178d3f..000000000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/irq.h>
-#include <plat/pm.h>
-
-#include "s3c2412-power.h"
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-#define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
-
-/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
- * having them turn up in both the INT* and the EINT* registers. Whilst
- * both show the status, they both now need to be acked when the IRQs
- * go off.
-*/
-
-static void
-s3c2412_irq_mask(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask | bitval, S3C2410_INTMSK);
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask | bitval, S3C2412_EINTMASK);
-}
-
-static inline void
-s3c2412_irq_ack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
- __raw_writel(bitval, S3C2412_EINTPEND);
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c2412_irq_maskack(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask|bitval, S3C2410_INTMSK);
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask | bitval, S3C2412_EINTMASK);
-
- __raw_writel(bitval, S3C2412_EINTPEND);
- __raw_writel(bitval, S3C2410_SRCPND);
- __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static void
-s3c2412_irq_unmask(struct irq_data *data)
-{
- unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
- unsigned long mask;
-
- mask = __raw_readl(S3C2412_EINTMASK);
- __raw_writel(mask & ~bitval, S3C2412_EINTMASK);
-
- mask = __raw_readl(S3C2410_INTMSK);
- __raw_writel(mask & ~bitval, S3C2410_INTMSK);
-}
-
-static struct irq_chip s3c2412_irq_eint0t4 = {
- .irq_ack = s3c2412_irq_ack,
- .irq_mask = s3c2412_irq_mask,
- .irq_unmask = s3c2412_irq_unmask,
- .irq_set_wake = s3c_irq_wake,
- .irq_set_type = s3c_irqext_type,
-};
-
-#define INTBIT(x) (1 << ((x) - S3C2410_IRQSUB(0)))
-
-/* CF and SDI sub interrupts */
-
-static void s3c2412_irq_demux_cfsdi(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
-
- if (subsrc & INTBIT(IRQ_S3C2412_SDI))
- generic_handle_irq(IRQ_S3C2412_SDI);
-
- if (subsrc & INTBIT(IRQ_S3C2412_CF))
- generic_handle_irq(IRQ_S3C2412_CF);
-}
-
-#define INTMSK_CFSDI (1UL << (IRQ_S3C2412_CFSDI - IRQ_EINT0))
-#define SUBMSK_CFSDI INTMSK_SUB(IRQ_S3C2412_SDI, IRQ_S3C2412_CF)
-
-static void s3c2412_irq_cfsdi_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CFSDI);
-}
-
-static void s3c2412_irq_cfsdi_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CFSDI, SUBMSK_CFSDI);
-}
-
-static struct irq_chip s3c2412_irq_cfsdi = {
- .name = "s3c2412-cfsdi",
- .irq_ack = s3c2412_irq_cfsdi_ack,
- .irq_mask = s3c2412_irq_cfsdi_mask,
- .irq_unmask = s3c2412_irq_cfsdi_unmask,
-};
-
-static int s3c2412_irq_rtc_wake(struct irq_data *data, unsigned int state)
-{
- unsigned long pwrcfg;
-
- pwrcfg = __raw_readl(S3C2412_PWRCFG);
- if (state)
- pwrcfg &= ~S3C2412_PWRCFG_RTC_MASKIRQ;
- else
- pwrcfg |= S3C2412_PWRCFG_RTC_MASKIRQ;
- __raw_writel(pwrcfg, S3C2412_PWRCFG);
-
- return s3c_irq_chip.irq_set_wake(data, state);
-}
-
-static struct irq_chip s3c2412_irq_rtc_chip;
-
-static int s3c2412_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_eint0t4,
- handle_edge_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* add demux support for CF/SDI */
-
- irq_set_chained_handler(IRQ_S3C2412_CFSDI, s3c2412_irq_demux_cfsdi);
-
- for (irqno = IRQ_S3C2412_SDI; irqno <= IRQ_S3C2412_CF; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c2412_irq_cfsdi,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- /* change RTC IRQ's set wake method */
-
- s3c2412_irq_rtc_chip = s3c_irq_chip;
- s3c2412_irq_rtc_chip.irq_set_wake = s3c2412_irq_rtc_wake;
-
- irq_set_chip(IRQ_RTC, &s3c2412_irq_rtc_chip);
-
- return 0;
-}
-
-static struct subsys_interface s3c2412_irq_interface = {
- .name = "s3c2412_irq",
- .subsys = &s3c2412_subsys,
- .add_dev = s3c2412_irq_add,
-};
-
-static int s3c2412_irq_init(void)
-{
- return subsys_interface_register(&s3c2412_irq_interface);
-}
-
-arch_initcall(s3c2412_irq_init);
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2440.c b/arch/arm/mach-s3c24xx/irq-s3c2440.c
deleted file mode 100644
index 4a18cde439cc..000000000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2440.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* WDT/AC97 */
-
-static void s3c_irq_demux_wdtac97(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 13;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_WDT);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_AC97);
- }
- }
-}
-
-
-#define INTMSK_WDT (1UL << (IRQ_WDT - IRQ_EINT0))
-
-static void
-s3c_irq_wdtac97_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static void
-s3c_irq_wdtac97_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_WDT);
-}
-
-static void
-s3c_irq_wdtac97_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_WDT, 3 << 13);
-}
-
-static struct irq_chip s3c_irq_wdtac97 = {
- .irq_mask = s3c_irq_wdtac97_mask,
- .irq_unmask = s3c_irq_wdtac97_unmask,
- .irq_ack = s3c_irq_wdtac97_ack,
-};
-
-static int s3c2440_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- printk("S3C2440: IRQ Support\n");
-
- /* add new chained handler for wdt, ac7 */
-
- irq_set_chip_and_handler(IRQ_WDT, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_WDT, s3c_irq_demux_wdtac97);
-
- for (irqno = IRQ_S3C2440_WDT; irqno <= IRQ_S3C2440_AC97; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_wdtac97,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c2440_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
diff --git a/arch/arm/mach-s3c24xx/irq-s3c244x.c b/arch/arm/mach-s3c24xx/irq-s3c244x.c
deleted file mode 100644
index 5fe8e58d3afd..000000000000
--- a/arch/arm/mach-s3c24xx/irq-s3c244x.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-/* camera irq */
-
-static void s3c_irq_demux_cam(unsigned int irq,
- struct irq_desc *desc)
-{
- unsigned int subsrc, submsk;
-
- /* read the current pending interrupts, and the mask
- * for what it is available */
-
- subsrc = __raw_readl(S3C2410_SUBSRCPND);
- submsk = __raw_readl(S3C2410_INTSUBMSK);
-
- subsrc &= ~submsk;
- subsrc >>= 11;
- subsrc &= 3;
-
- if (subsrc != 0) {
- if (subsrc & 1) {
- generic_handle_irq(IRQ_S3C2440_CAM_C);
- }
- if (subsrc & 2) {
- generic_handle_irq(IRQ_S3C2440_CAM_P);
- }
- }
-}
-
-#define INTMSK_CAM (1UL << (IRQ_CAM - IRQ_EINT0))
-
-static void
-s3c_irq_cam_mask(struct irq_data *data)
-{
- s3c_irqsub_mask(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static void
-s3c_irq_cam_unmask(struct irq_data *data)
-{
- s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void
-s3c_irq_cam_ack(struct irq_data *data)
-{
- s3c_irqsub_maskack(data->irq, INTMSK_CAM, 3 << 11);
-}
-
-static struct irq_chip s3c_irq_cam = {
- .irq_mask = s3c_irq_cam_mask,
- .irq_unmask = s3c_irq_cam_unmask,
- .irq_ack = s3c_irq_cam_ack,
-};
-
-static int s3c244x_irq_add(struct device *dev, struct subsys_interface *sif)
-{
- unsigned int irqno;
-
- irq_set_chip_and_handler(IRQ_NFCON, &s3c_irq_level_chip,
- handle_level_irq);
- set_irq_flags(IRQ_NFCON, IRQF_VALID);
-
- /* add chained handler for camera */
-
- irq_set_chip_and_handler(IRQ_CAM, &s3c_irq_level_chip,
- handle_level_irq);
- irq_set_chained_handler(IRQ_CAM, s3c_irq_demux_cam);
-
- for (irqno = IRQ_S3C2440_CAM_C; irqno <= IRQ_S3C2440_CAM_P; irqno++) {
- irq_set_chip_and_handler(irqno, &s3c_irq_cam,
- handle_level_irq);
- set_irq_flags(irqno, IRQF_VALID);
- }
-
- return 0;
-}
-
-static struct subsys_interface s3c2440_irq_interface = {
- .name = "s3c2440_irq",
- .subsys = &s3c2440_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-static int s3c2440_irq_init(void)
-{
- return subsys_interface_register(&s3c2440_irq_interface);
-}
-
-arch_initcall(s3c2440_irq_init);
-
-static struct subsys_interface s3c2442_irq_interface = {
- .name = "s3c2442_irq",
- .subsys = &s3c2442_subsys,
- .add_dev = s3c244x_irq_add,
-};
-
-
-static int s3c2442_irq_init(void)
-{
- return subsys_interface_register(&s3c2442_irq_interface);
-}
-
-arch_initcall(s3c2442_irq_init);
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 0e0279e79150..e27b5c91b3db 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -63,6 +63,8 @@
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
+
#include "common.h"
static struct resource amlm5900_nor_resource =
@@ -160,6 +162,7 @@ static void __init amlm5900_map_io(void)
s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
#ifdef CONFIG_FB_S3C2410
@@ -235,8 +238,8 @@ static void __init amlm5900_init(void)
MACHINE_START(AML_M5900, "AML_M5900")
.atag_offset = 0x100,
.map_io = amlm5900_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = amlm5900_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index bb595f15ce36..c1fb6c37867f 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/samsung-time.h>
#include "anubis.h"
#include "common.h"
@@ -410,6 +411,7 @@ static void __init anubis_map_io(void)
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
@@ -443,7 +445,7 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
.atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index b4bc60c78ebb..6dfeeb7ef469 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -48,6 +48,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/mmc-s3cmci.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -192,6 +193,7 @@ static void __init at2440evb_map_io(void)
s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init at2440evb_init(void)
@@ -209,7 +211,7 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
.atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index ca6618081041..22d6ae926d91 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -55,6 +55,7 @@
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
@@ -576,6 +577,7 @@ static void __init bast_map_io(void)
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init bast_init(void)
@@ -603,8 +605,8 @@ MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = bast_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = bast_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index a25e8c5a7b4c..13d8d073675a 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -81,6 +81,7 @@
#include <plat/gpio-cfg.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "gta02.h"
@@ -501,6 +502,7 @@ static void __init gta02_map_io(void)
s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
@@ -587,8 +589,8 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
.atag_offset = 0x100,
.map_io = gta02_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = gta02_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index 79bc0830d740..af4334d6b4d5 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -62,7 +62,7 @@
#include <plat/pll.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
-
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
@@ -646,6 +646,7 @@ static void __init h1940_map_io(void)
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
@@ -666,11 +667,6 @@ static void __init h1940_reserve(void)
memblock_reserve(0x30081000, 0x1000);
}
-static void __init h1940_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
static void __init h1940_init(void)
{
u32 tmp;
@@ -739,8 +735,8 @@ MACHINE_START(H1940, "IPAQ-H1940")
.atag_offset = 0x100,
.map_io = h1940_map_io,
.reserve = h1940_reserve,
- .init_irq = h1940_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = h1940_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index ca08d7df07f7..a45fcd8ccf79 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -52,6 +52,7 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "s3c2412-power.h"
@@ -506,6 +507,7 @@ static void __init jive_map_io(void)
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void jive_power_off(void)
@@ -658,9 +660,9 @@ MACHINE_START(JIVE, "JIVE")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 2865e5919f2c..a83db46320bc 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -56,6 +56,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include <sound/s3c24xx_uda134x.h>
@@ -525,6 +526,7 @@ static void __init mini2440_map_io(void)
s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/*
@@ -686,7 +688,7 @@ MACHINE_START(MINI2440, "MINI2440")
.atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 8017c0fc1729..2cb46c37c920 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <linux/platform_data/mmc-s3cmci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -535,6 +536,7 @@ static void __init n30_map_io(void)
n30_hwinit();
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* GPB3 is the line that controls the pull-up for the USB D+ line */
@@ -588,9 +590,9 @@ MACHINE_START(N30, "Acer-N30")
Ben Dooks <ben-linux@fluff.org>
*/
.atag_offset = 0x100,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.init_machine = n30_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
.restart = s3c2410_restart,
MACHINE_END
@@ -599,9 +601,9 @@ MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
.atag_offset = 0x100,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.init_machine = n30_init,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.map_io = n30_map_io,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 144b9f80c4a5..01f4354206f9 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -44,6 +44,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -135,6 +136,7 @@ static void __init nexcoder_map_io(void)
s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
nexcoder_sensorboard_init();
}
@@ -150,7 +152,7 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
.atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2440_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index ae2cbdf3e3ca..58d6fbe5bf1f 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -45,6 +45,7 @@
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
@@ -384,6 +385,7 @@ static void __init osiris_map_io(void)
s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* check for the newer revision boards with large page nand */
@@ -424,8 +426,8 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.atag_offset = 0x100,
.map_io = osiris_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = osiris_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index deb0ace585b0..7e16b0740ec1 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -33,6 +33,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "otom.h"
@@ -101,6 +102,7 @@ static void __init otom11_map_io(void)
s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init otom11_init(void)
@@ -114,7 +116,7 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
.atag_offset = 0x100,
.map_io = otom11_map_io,
.init_machine = otom11_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2410_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 84c541602661..f8feaeadb55a 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -59,6 +59,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
@@ -304,6 +305,7 @@ static void __init qt2410_map_io(void)
s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
s3c24xx_init_clocks(12*1000*1000);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init qt2410_machine_init(void)
@@ -341,8 +343,8 @@ static void __init qt2410_machine_init(void)
MACHINE_START(QT2410, "QT2410")
.atag_offset = 0x100,
.map_io = qt2410_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = qt2410_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 43f3ac5a1c7a..44ca018e1f96 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -57,6 +57,7 @@
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
@@ -740,6 +741,7 @@ static void __init rx1950_map_io(void)
s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* setup PM */
@@ -810,8 +812,8 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
.atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2442_init_irq,
.init_machine = rx1950_init_machine,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index f20418a2fb1b..3bc6231d0a1f 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "h1940.h"
@@ -179,6 +180,7 @@ static void __init rx3715_map_io(void)
s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
s3c24xx_init_clocks(16934000);
s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
/* H1940 and RX3715 need to reserve this for suspend */
@@ -188,11 +190,6 @@ static void __init rx3715_reserve(void)
memblock_reserve(0x30081000, 0x1000);
}
-static void __init rx3715_init_irq(void)
-{
- s3c24xx_init_irq();
-}
-
static void __init rx3715_init_machine(void)
{
#ifdef CONFIG_PM_H1940
@@ -210,8 +207,8 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
.atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
- .init_irq = rx3715_init_irq,
+ .init_irq = s3c2440_init_irq,
.init_machine = rx3715_init_machine,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index cd0b1635c47e..a773789e4f38 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -51,6 +51,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
@@ -100,6 +101,7 @@ static void __init smdk2410_map_io(void)
s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2410_init(void)
@@ -114,8 +116,8 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
/* Maintainer: Jonas Dietsche */
.atag_offset = 0x100,
.map_io = smdk2410_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = smdk2410_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 79485907950f..8146e920f10d 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -44,6 +44,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
@@ -105,6 +106,7 @@ static void __init smdk2413_map_io(void)
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2413_machine_init(void)
@@ -128,10 +130,10 @@ MACHINE_START(S3C2413, "S3C2413")
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
@@ -140,10 +142,10 @@ MACHINE_START(SMDK2412, "SMDK2412")
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
@@ -152,9 +154,9 @@ MACHINE_START(SMDK2413, "SMDK2413")
.atag_offset = 0x100,
.fixup = smdk2413_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index 037a5da343bd..cb46847c66b4 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -50,6 +50,7 @@
#include <plat/sdhci.h>
#include <linux/platform_data/usb-s3c2410_udc.h>
#include <linux/platform_data/s3c-hsudc.h>
+#include <plat/samsung-time.h>
#include <plat/fb.h>
@@ -221,6 +222,7 @@ static void __init smdk2416_map_io(void)
s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2416_machine_init(void)
@@ -253,6 +255,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
.init_irq = s3c2416_init_irq,
.map_io = smdk2416_map_io,
.init_machine = smdk2416_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2416_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index 29d31314e23c..de2e5d39a847 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -41,6 +41,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
@@ -160,6 +161,7 @@ static void __init smdk2440_map_io(void)
s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
s3c24xx_init_clocks(16934400);
s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2440_machine_init(void)
@@ -175,9 +177,9 @@ MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.atag_offset = 0x100,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2440_init_irq,
.map_io = smdk2440_map_io,
.init_machine = smdk2440_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c244x_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index b3be4c4dc7bc..9435c3bef18a 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -41,6 +41,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "common-smdk.h"
@@ -121,6 +122,7 @@ static void __init smdk2443_map_io(void)
s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdk2443_machine_init(void)
@@ -142,6 +144,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
.init_irq = s3c2443_init_irq,
.map_io = smdk2443_map_io,
.init_machine = smdk2443_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2443_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 24b3d79e7b2c..7fad8f055cab 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -53,6 +53,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/map.h>
#include <linux/mtd/physmap.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -136,6 +137,7 @@ static void __init tct_hammer_map_io(void)
s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init tct_hammer_init(void)
@@ -147,8 +149,8 @@ static void __init tct_hammer_init(void)
MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
.atag_offset = 0x100,
.map_io = tct_hammer_map_io,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2410_init_irq,
.init_machine = tct_hammer_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index ec42d1e4e465..42e7187fed60 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -45,6 +45,7 @@
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/regs-serial.h>
+#include <plat/samsung-time.h>
#include "bast.h"
#include "common.h"
@@ -332,6 +333,7 @@ static void __init vr1000_map_io(void)
s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vr1000_init(void)
@@ -353,7 +355,7 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
.atag_offset = 0x100,
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
- .init_irq = s3c24xx_init_irq,
- .init_time = s3c24xx_timer_init,
+ .init_irq = s3c2410_init_irq,
+ .init_time = samsung_timer_init,
.restart = s3c2410_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 239129c2d8bc..b66588428ec9 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -44,6 +44,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -142,6 +143,7 @@ static void __init vstms_map_io(void)
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init vstms_init(void)
@@ -156,9 +158,9 @@ MACHINE_START(VSTMS, "VSTMS")
.atag_offset = 0x100,
.fixup = vstms_fixup,
- .init_irq = s3c24xx_init_irq,
+ .init_irq = s3c2412_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index 4c4bc1c83b77..d75f95e487ee 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -29,6 +29,7 @@
#include <plat/cpu.h>
#include <plat/pm.h>
+#include <plat/wakeup-mask.h>
#include "regs-dsc.h"
#include "s3c2412-power.h"
@@ -51,8 +52,15 @@ static int s3c2412_cpu_suspend(unsigned long arg)
return 1; /* Aborting suspend */
}
+/* mapping of interrupts to parts of the wakeup mask */
+static struct samsung_wakeup_mask wake_irqs[] = {
+ { .irq = IRQ_RTC, .bit = S3C2412_PWRCFG_RTC_MASKIRQ, },
+};
+
static void s3c2412_pm_prepare(void)
{
+ samsung_sync_wakemask(S3C2412_PWRCFG,
+ wake_irqs, ARRAY_SIZE(wake_irqs));
}
static int s3c2412_pm_add(struct device *dev, struct subsys_interface *sif)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 131c86284711..283cb77d4721 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -17,11 +17,13 @@ config PLAT_S3C64XX
# Configuration options for the S3C6410 CPU
config CPU_S3C6400
+ select SAMSUNG_HRT
bool
help
Enable S3C6400 CPU support
config CPU_S3C6410
+ select SAMSUNG_HRT
bool
help
Enable S3C6410 CPU support
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 728eef3296b2..35e3f54574ef 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -49,6 +49,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <mach/regs-gpio.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -208,6 +209,7 @@ static void __init anw6410_map_io(void)
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
anw6410_lcd_mode_set();
}
@@ -232,6 +234,6 @@ MACHINE_START(ANW6410, "A&W6410")
.map_io = anw6410_map_io,
.init_machine = anw6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 1acf02bace57..8ad88ace795a 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -64,6 +64,7 @@
#include <plat/adc.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "crag6410.h"
@@ -744,6 +745,7 @@ static void __init crag6410_map_io(void)
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* LCD type and Bypass set by bootloader */
}
@@ -868,6 +870,6 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 7212eb9cfeb9..5b7f357d8c22 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -41,6 +41,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -248,6 +249,7 @@ static void __init hmt_map_io(void)
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init hmt_machine_init(void)
@@ -275,6 +277,6 @@ MACHINE_START(HMT, "Airgoo-HMT")
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 4b41fcdaa7b6..fc043e3ecdf8 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -41,6 +41,7 @@
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -232,6 +233,7 @@ static void __init mini6410_map_io(void)
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
@@ -354,6 +356,6 @@ MACHINE_START(MINI6410, "MINI6410")
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 8d3cedd995ff..7e2c3908f1f8 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -43,6 +43,7 @@
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -87,6 +88,7 @@ static void __init ncp_map_io(void)
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init ncp_machine_init(void)
@@ -103,6 +105,6 @@ MACHINE_START(NCP, "NCP")
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index fa12bd21ad82..8bed37b3d5ac 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -42,6 +42,7 @@
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -211,6 +212,7 @@ static void __init real6410_map_io(void)
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
@@ -333,6 +335,6 @@ MACHINE_START(REAL6410, "REAL6410")
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index fc3e9b32e26f..58ac99041274 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -38,6 +38,7 @@
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -378,6 +379,7 @@ void __init smartq_map_io(void)
s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
smartq_lcd_mode_set();
}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index ca2afcfce573..8aca5daf3d05 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -28,6 +28,7 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "mach-smartq.h"
@@ -155,6 +156,6 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 37bb0c632a5e..a052e107c0b4 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -28,6 +28,7 @@
#include <plat/devs.h>
#include <plat/fb.h>
#include <plat/gpio-cfg.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "mach-smartq.h"
@@ -171,6 +172,6 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index a392869c8342..d70c0843aea2 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -35,6 +35,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -66,6 +67,7 @@ static void __init smdk6400_map_io(void)
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static struct platform_device *smdk6400_devices[] __initdata = {
@@ -92,6 +94,6 @@ MACHINE_START(SMDK6400, "SMDK6400")
.map_io = smdk6400_map_io,
.init_machine = smdk6400_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index ba7544e2d04d..bd3295a19ad7 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -69,6 +69,7 @@
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <plat/keypad.h>
#include <plat/backlight.h>
+#include <plat/samsung-time.h>
#include "common.h"
#include "regs-modem.h"
@@ -634,6 +635,7 @@ static void __init smdk6410_map_io(void)
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
/* set the LCD type */
@@ -702,6 +704,6 @@ MACHINE_START(SMDK6410, "SMDK6410")
.map_io = smdk6410_map_io,
.init_machine = smdk6410_machine_init,
.init_late = s3c64xx_init_late,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s3c64xx_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index e8742cb7ddd9..5a707bdb9ea0 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -9,16 +9,16 @@ if ARCH_S5P64X0
config CPU_S5P6440
bool
- select S5P_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
select SAMSUNG_WAKEMASK if PM
help
Enable S5P6440 CPU support
config CPU_S5P6450
bool
- select S5P_HRT
+ select SAMSUNG_HRT
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
select SAMSUNG_WAKEMASK if PM
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index e23723a5a214..73f71a698a34 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -48,7 +48,7 @@
#include <plat/pll.h>
#include <plat/adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
@@ -229,7 +229,7 @@ static void __init smdk6440_map_io(void)
s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void s5p6440_set_lcd_interface(void)
@@ -273,6 +273,6 @@ MACHINE_START(SMDK6440, "SMDK6440")
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
.init_machine = smdk6440_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index ca10963a959e..18303e12019f 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -48,7 +48,7 @@
#include <plat/pll.h>
#include <plat/adc.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
@@ -248,7 +248,7 @@ static void __init smdk6450_map_io(void)
s5p64x0_init_io(NULL, 0);
s3c24xx_init_clocks(19200000);
s3c24xx_init_uarts(smdk6450_uartcfgs, ARRAY_SIZE(smdk6450_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void s5p6450_set_lcd_interface(void)
@@ -292,6 +292,6 @@ MACHINE_START(SMDK6450, "SMDK6450")
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
.init_machine = smdk6450_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5p64x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 15170be97a74..2f456a4533ba 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -11,6 +11,7 @@ config CPU_S5PC100
bool
select S5P_EXT_INT
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
help
Enable S5PC100 CPU support
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 185a19583898..8c880f76f274 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -51,6 +51,7 @@
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <linux/platform_data/asoc-s3c.h>
#include <plat/backlight.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -221,6 +222,7 @@ static void __init smdkc100_map_io(void)
s5pc100_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdkc100_uartcfgs, ARRAY_SIZE(smdkc100_uartcfgs));
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdkc100_machine_init(void)
@@ -255,6 +257,6 @@ MACHINE_START(SMDKC100, "SMDKC100")
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
- .init_time = s3c24xx_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pc100_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 92ad72f0ef98..0963283a7c5d 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -12,10 +12,10 @@ if ARCH_S5PV210
config CPU_S5PV210
bool
select S5P_EXT_INT
- select S5P_HRT
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
+ select SAMSUNG_HRT
help
Enable S5PV210 CPU support
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 11900a8e88a3..ed2b85485b9d 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -38,7 +38,7 @@
#include <plat/fb.h>
#include <plat/fimc-core.h>
#include <plat/sdhci.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -651,7 +651,7 @@ static void __init aquila_map_io(void)
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init aquila_machine_init(void)
@@ -686,6 +686,6 @@ MACHINE_START(AQUILA, "Aquila")
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index e373de44a8b6..30b24ad84f49 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -47,7 +47,7 @@
#include <plat/keypad.h>
#include <plat/sdhci.h>
#include <plat/clock.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/mfc.h>
#include <plat/camport.h>
@@ -908,7 +908,7 @@ static void __init goni_map_io(void)
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(goni_uartcfgs, ARRAY_SIZE(goni_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init goni_reserve(void)
@@ -973,7 +973,7 @@ MACHINE_START(GONI, "GONI")
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.reserve = &goni_reserve,
.restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 28bd0248a3e2..7c0ed07a78a3 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -29,7 +29,7 @@
#include <linux/platform_data/ata-samsung_cf.h>
#include <linux/platform_data/i2c-s3c2410.h>
#include <plat/pm.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/mfc.h>
#include "common.h"
@@ -120,7 +120,7 @@ static void __init smdkc110_map_io(void)
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init smdkc110_reserve(void)
@@ -153,7 +153,7 @@ MACHINE_START(SMDKC110, "SMDKC110")
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkc110_reserve,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 3c73f36869bb..d50b6f124465 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -44,7 +44,7 @@
#include <plat/keypad.h>
#include <plat/pm.h>
#include <plat/fb.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include <plat/backlight.h>
#include <plat/mfc.h>
#include <plat/clock.h>
@@ -285,7 +285,7 @@ static void __init smdkv210_map_io(void)
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(clk_xusbxti.rate);
s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
- s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM2, SAMSUNG_PWM4);
}
static void __init smdkv210_reserve(void)
@@ -329,7 +329,7 @@ MACHINE_START(SMDKV210, "SMDKV210")
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
.reserve = &smdkv210_reserve,
MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 2d4c5531819c..579afe89842a 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -26,7 +26,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
#include "common.h"
@@ -106,7 +106,7 @@ static void __init torbreck_map_io(void)
s5pv210_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(torbreck_uartcfgs, ARRAY_SIZE(torbreck_uartcfgs));
- s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
+ samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
static void __init torbreck_machine_init(void)
@@ -130,6 +130,6 @@ MACHINE_START(TORBRECK, "TORBRECK")
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
- .init_time = s5p_timer_init,
+ .init_time = samsung_timer_init,
.restart = s5pv210_restart,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 9255546e7bf6..75d413c004b6 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -16,6 +16,7 @@ config ARCH_SH73A0
select CPU_V7
select I2C
select SH_CLK_CPG
+ select RENESAS_INTC_IRQPIN
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
@@ -31,6 +32,7 @@ config ARCH_R8A7779
select SH_CLK_CPG
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
+ select RENESAS_INTC_IRQPIN
config ARCH_EMEV2
bool "Emma Mobile EV2"
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index a385f570bbfc..95fe396f9604 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -81,7 +81,7 @@ static struct resource smsc9221_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = intcs_evt2irq(0x260), /* IRQ3 */
+ .start = irq_pin(3), /* IRQ3 */
.flags = IORESOURCE_IRQ,
},
};
@@ -115,7 +115,7 @@ static struct resource usb_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = intcs_evt2irq(0x220), /* IRQ1 */
+ .start = irq_pin(1), /* IRQ1 */
.flags = IORESOURCE_IRQ,
},
};
@@ -138,7 +138,7 @@ struct usbhs_private {
struct renesas_usbhs_platform_info info;
};
-#define IRQ15 intcs_evt2irq(0x03e0)
+#define IRQ15 irq_pin(15)
#define USB_PHY_MODE (1 << 4)
#define USB_PHY_INT_EN ((1 << 3) | (1 << 2))
#define USB_PHY_ON (1 << 1)
@@ -567,25 +567,25 @@ static struct i2c_board_info i2c0_devices[] = {
},
{
I2C_BOARD_INFO("ak8975", 0x0c),
- .irq = intcs_evt2irq(0x3380), /* IRQ28 */
+ .irq = irq_pin(28), /* IRQ28 */
},
{
I2C_BOARD_INFO("adxl34x", 0x1d),
- .irq = intcs_evt2irq(0x3340), /* IRQ26 */
+ .irq = irq_pin(26), /* IRQ26 */
},
};
static struct i2c_board_info i2c1_devices[] = {
{
I2C_BOARD_INFO("st1232-ts", 0x55),
- .irq = intcs_evt2irq(0x300), /* IRQ8 */
+ .irq = irq_pin(8), /* IRQ8 */
},
};
static struct i2c_board_info i2c3_devices[] = {
{
I2C_BOARD_INFO("pcf8575", 0x20),
- .irq = intcs_evt2irq(0x3260), /* IRQ19 */
+ .irq = irq_pin(19), /* IRQ19 */
.platform_data = &pcf8575_pdata,
},
};
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index 62c04c252418..1fef737a4c1a 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -58,6 +58,7 @@ extern void r8a7740_pm_init(void);
extern void r8a7779_init_delay(void);
extern void r8a7779_init_irq(void);
+extern void r8a7779_init_irq_extpin(int irlm);
extern void r8a7779_init_irq_dt(void);
extern void r8a7779_map_io(void);
extern void r8a7779_earlytimer_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h
index 992ed213cec1..b2074e2acb15 100644
--- a/arch/arm/mach-shmobile/include/mach/irqs.h
+++ b/arch/arm/mach-shmobile/include/mach/irqs.h
@@ -12,4 +12,8 @@
#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+/* External IRQ pins */
+#define IRQPIN_BASE 2000
+#define irq_pin(nr) ((nr) + IRQPIN_BASE)
+
#endif /* __ASM_MACH_IRQS_H */
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
index f9cc4bc9c798..b86dc8908724 100644
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ b/arch/arm/mach-shmobile/intc-r8a7779.c
@@ -19,13 +19,16 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
-#include <mach/common.h>
+#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/irqchip.h>
+#include <mach/common.h>
#include <mach/intc.h>
+#include <mach/irqs.h>
#include <mach/r8a7779.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,6 +42,54 @@
#define INT2NTSR0 IOMEM(0xfe700060)
#define INT2NTSR1 IOMEM(0xfe700064)
+static struct renesas_intc_irqpin_config irqpin0_platform_data = {
+ .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
+ .sense_bitfield_width = 2,
+};
+
+static struct resource irqpin0_resources[] = {
+ DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
+ DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
+ DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
+ DEFINE_RES_MEM(0xfe780044, 4), /* INTMSK0 */
+ DEFINE_RES_MEM(0xfe780064, 4), /* INTMSKCLR0 */
+ DEFINE_RES_IRQ(gic_spi(27)), /* IRQ0 */
+ DEFINE_RES_IRQ(gic_spi(28)), /* IRQ1 */
+ DEFINE_RES_IRQ(gic_spi(29)), /* IRQ2 */
+ DEFINE_RES_IRQ(gic_spi(30)), /* IRQ3 */
+};
+
+static struct platform_device irqpin0_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 0,
+ .resource = irqpin0_resources,
+ .num_resources = ARRAY_SIZE(irqpin0_resources),
+ .dev = {
+ .platform_data = &irqpin0_platform_data,
+ },
+};
+
+void __init r8a7779_init_irq_extpin(int irlm)
+{
+ void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
+ unsigned long tmp;
+
+ if (icr0) {
+ tmp = ioread32(icr0);
+ if (irlm)
+ tmp |= 1 << 23; /* IRQ0 -> IRQ3 as individual pins */
+ else
+ tmp &= ~(1 << 23); /* IRL mode - not supported */
+ tmp |= (1 << 21); /* LVLMODE = 1 */
+ iowrite32(tmp, icr0);
+ iounmap(icr0);
+
+ if (irlm)
+ platform_device_register(&irqpin0_device);
+ } else
+ pr_warn("r8a7779: unable to setup external irq pin mode\n");
+}
+
static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
{
return 0; /* always allow wakeup */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index a81a1d804e2e..19a26f4579b3 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -260,108 +260,6 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
return 0; /* always allow wakeup */
}
-#define RELOC_BASE 0x1200
-
-/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
-#define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
-
-INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,
- INTCS_VECT_RELOC, "sh73a0-intca-irq-pins");
-
-static int to_gic_irq(struct irq_data *data)
-{
- unsigned int vect = irq2evt(data->irq) - INTCS_VECT_BASE;
-
- if (vect >= 0x3200)
- vect -= 0x3000;
- else
- vect -= 0x0200;
-
- return gic_spi((vect >> 5) + 1);
-}
-
-static int to_intca_reloc_irq(struct irq_data *data)
-{
- return data->irq + (RELOC_BASE >> 5);
-}
-
-#define irq_cb(cb, irq) irq_get_chip(irq)->cb(irq_get_irq_data(irq))
-#define irq_cbp(cb, irq, p...) irq_get_chip(irq)->cb(irq_get_irq_data(irq), p)
-
-static void intca_gic_enable(struct irq_data *data)
-{
- irq_cb(irq_unmask, to_intca_reloc_irq(data));
- irq_cb(irq_unmask, to_gic_irq(data));
-}
-
-static void intca_gic_disable(struct irq_data *data)
-{
- irq_cb(irq_mask, to_gic_irq(data));
- irq_cb(irq_mask, to_intca_reloc_irq(data));
-}
-
-static void intca_gic_mask_ack(struct irq_data *data)
-{
- irq_cb(irq_mask, to_gic_irq(data));
- irq_cb(irq_mask_ack, to_intca_reloc_irq(data));
-}
-
-static void intca_gic_eoi(struct irq_data *data)
-{
- irq_cb(irq_eoi, to_gic_irq(data));
-}
-
-static int intca_gic_set_type(struct irq_data *data, unsigned int type)
-{
- return irq_cbp(irq_set_type, to_intca_reloc_irq(data), type);
-}
-
-#ifdef CONFIG_SMP
-static int intca_gic_set_affinity(struct irq_data *data,
- const struct cpumask *cpumask,
- bool force)
-{
- return irq_cbp(irq_set_affinity, to_gic_irq(data), cpumask, force);
-}
-#endif
-
-struct irq_chip intca_gic_irq_chip = {
- .name = "INTCA-GIC",
- .irq_mask = intca_gic_disable,
- .irq_unmask = intca_gic_enable,
- .irq_mask_ack = intca_gic_mask_ack,
- .irq_eoi = intca_gic_eoi,
- .irq_enable = intca_gic_enable,
- .irq_disable = intca_gic_disable,
- .irq_shutdown = intca_gic_disable,
- .irq_set_type = intca_gic_set_type,
- .irq_set_wake = sh73a0_set_wake,
-#ifdef CONFIG_SMP
- .irq_set_affinity = intca_gic_set_affinity,
-#endif
-};
-
-static int to_intc_vect(int irq)
-{
- unsigned int irq_pin = irq - gic_spi(1);
- unsigned int offs;
-
- if (irq_pin < 16)
- offs = 0x0200;
- else
- offs = 0x3000;
-
- return offs + (irq_pin << 5);
-}
-
-static irqreturn_t sh73a0_irq_pin_demux(int irq, void *dev_id)
-{
- generic_handle_irq(intcs_evt2irq(to_intc_vect(irq)));
- return IRQ_HANDLED;
-}
-
-static struct irqaction sh73a0_irq_pin_cascade[32];
-
#define PINTER0_PHYS 0xe69000a0
#define PINTER1_PHYS 0xe69000a4
#define PINTER0_VIRT IOMEM(0xe69000a0)
@@ -422,13 +320,11 @@ void __init sh73a0_init_irq(void)
void __iomem *gic_dist_base = IOMEM(0xf0001000);
void __iomem *gic_cpu_base = IOMEM(0xf0000100);
void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
- int k, n;
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = sh73a0_set_wake;
register_intc_controller(&intcs_desc);
- register_intc_controller(&intca_irq_pins_desc);
register_intc_controller(&intc_pint0_desc);
register_intc_controller(&intc_pint1_desc);
@@ -438,19 +334,6 @@ void __init sh73a0_init_irq(void)
sh73a0_intcs_cascade.dev_id = intevtsa;
setup_irq(gic_spi(50), &sh73a0_intcs_cascade);
- /* IRQ pins require special handling through INTCA and GIC */
- for (k = 0; k < 32; k++) {
- sh73a0_irq_pin_cascade[k].name = "INTCA-GIC cascade";
- sh73a0_irq_pin_cascade[k].handler = sh73a0_irq_pin_demux;
- setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
-
- n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
- WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
- irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
- handle_level_irq, "level");
- set_irq_flags(n, IRQF_VALID); /* yuck */
- }
-
/* PINT pins are sanely tied to the GIC as SPI */
sh73a0_pint0_cascade.name = "PINT0 cascade";
sh73a0_pint0_cascade.handler = sh73a0_pint0_demux;
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 2257a915746d..e8cd93a5c550 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -33,6 +33,7 @@
#include <linux/sh_intc.h>
#include <linux/sh_timer.h>
#include <linux/platform_data/sh_ipmmu.h>
+#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <mach/dma-register.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
@@ -811,6 +812,127 @@ static struct platform_device ipmmu_device = {
.num_resources = ARRAY_SIZE(ipmmu_resources),
};
+static struct renesas_intc_irqpin_config irqpin0_platform_data = {
+ .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */
+};
+
+static struct resource irqpin0_resources[] = {
+ DEFINE_RES_MEM(0xe6900000, 4), /* ICR1A */
+ DEFINE_RES_MEM(0xe6900010, 4), /* INTPRI00A */
+ DEFINE_RES_MEM(0xe6900020, 1), /* INTREQ00A */
+ DEFINE_RES_MEM(0xe6900040, 1), /* INTMSK00A */
+ DEFINE_RES_MEM(0xe6900060, 1), /* INTMSKCLR00A */
+ DEFINE_RES_IRQ(gic_spi(1)), /* IRQ0 */
+ DEFINE_RES_IRQ(gic_spi(2)), /* IRQ1 */
+ DEFINE_RES_IRQ(gic_spi(3)), /* IRQ2 */
+ DEFINE_RES_IRQ(gic_spi(4)), /* IRQ3 */
+ DEFINE_RES_IRQ(gic_spi(5)), /* IRQ4 */
+ DEFINE_RES_IRQ(gic_spi(6)), /* IRQ5 */
+ DEFINE_RES_IRQ(gic_spi(7)), /* IRQ6 */
+ DEFINE_RES_IRQ(gic_spi(8)), /* IRQ7 */
+};
+
+static struct platform_device irqpin0_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 0,
+ .resource = irqpin0_resources,
+ .num_resources = ARRAY_SIZE(irqpin0_resources),
+ .dev = {
+ .platform_data = &irqpin0_platform_data,
+ },
+};
+
+static struct renesas_intc_irqpin_config irqpin1_platform_data = {
+ .irq_base = irq_pin(8), /* IRQ8 -> IRQ15 */
+ .control_parent = true, /* Disable spurious IRQ10 */
+};
+
+static struct resource irqpin1_resources[] = {
+ DEFINE_RES_MEM(0xe6900004, 4), /* ICR2A */
+ DEFINE_RES_MEM(0xe6900014, 4), /* INTPRI10A */
+ DEFINE_RES_MEM(0xe6900024, 1), /* INTREQ10A */
+ DEFINE_RES_MEM(0xe6900044, 1), /* INTMSK10A */
+ DEFINE_RES_MEM(0xe6900064, 1), /* INTMSKCLR10A */
+ DEFINE_RES_IRQ(gic_spi(9)), /* IRQ8 */
+ DEFINE_RES_IRQ(gic_spi(10)), /* IRQ9 */
+ DEFINE_RES_IRQ(gic_spi(11)), /* IRQ10 */
+ DEFINE_RES_IRQ(gic_spi(12)), /* IRQ11 */
+ DEFINE_RES_IRQ(gic_spi(13)), /* IRQ12 */
+ DEFINE_RES_IRQ(gic_spi(14)), /* IRQ13 */
+ DEFINE_RES_IRQ(gic_spi(15)), /* IRQ14 */
+ DEFINE_RES_IRQ(gic_spi(16)), /* IRQ15 */
+};
+
+static struct platform_device irqpin1_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 1,
+ .resource = irqpin1_resources,
+ .num_resources = ARRAY_SIZE(irqpin1_resources),
+ .dev = {
+ .platform_data = &irqpin1_platform_data,
+ },
+};
+
+static struct renesas_intc_irqpin_config irqpin2_platform_data = {
+ .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */
+};
+
+static struct resource irqpin2_resources[] = {
+ DEFINE_RES_MEM(0xe6900008, 4), /* ICR3A */
+ DEFINE_RES_MEM(0xe6900018, 4), /* INTPRI20A */
+ DEFINE_RES_MEM(0xe6900028, 1), /* INTREQ20A */
+ DEFINE_RES_MEM(0xe6900048, 1), /* INTMSK20A */
+ DEFINE_RES_MEM(0xe6900068, 1), /* INTMSKCLR20A */
+ DEFINE_RES_IRQ(gic_spi(17)), /* IRQ16 */
+ DEFINE_RES_IRQ(gic_spi(18)), /* IRQ17 */
+ DEFINE_RES_IRQ(gic_spi(19)), /* IRQ18 */
+ DEFINE_RES_IRQ(gic_spi(20)), /* IRQ19 */
+ DEFINE_RES_IRQ(gic_spi(21)), /* IRQ20 */
+ DEFINE_RES_IRQ(gic_spi(22)), /* IRQ21 */
+ DEFINE_RES_IRQ(gic_spi(23)), /* IRQ22 */
+ DEFINE_RES_IRQ(gic_spi(24)), /* IRQ23 */
+};
+
+static struct platform_device irqpin2_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 2,
+ .resource = irqpin2_resources,
+ .num_resources = ARRAY_SIZE(irqpin2_resources),
+ .dev = {
+ .platform_data = &irqpin2_platform_data,
+ },
+};
+
+static struct renesas_intc_irqpin_config irqpin3_platform_data = {
+ .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */
+};
+
+static struct resource irqpin3_resources[] = {
+ DEFINE_RES_MEM(0xe690000c, 4), /* ICR4A */
+ DEFINE_RES_MEM(0xe690001c, 4), /* INTPRI30A */
+ DEFINE_RES_MEM(0xe690002c, 1), /* INTREQ30A */
+ DEFINE_RES_MEM(0xe690004c, 1), /* INTMSK30A */
+ DEFINE_RES_MEM(0xe690006c, 1), /* INTMSKCLR30A */
+ DEFINE_RES_IRQ(gic_spi(25)), /* IRQ24 */
+ DEFINE_RES_IRQ(gic_spi(26)), /* IRQ25 */
+ DEFINE_RES_IRQ(gic_spi(27)), /* IRQ26 */
+ DEFINE_RES_IRQ(gic_spi(28)), /* IRQ27 */
+ DEFINE_RES_IRQ(gic_spi(29)), /* IRQ28 */
+ DEFINE_RES_IRQ(gic_spi(30)), /* IRQ29 */
+ DEFINE_RES_IRQ(gic_spi(31)), /* IRQ30 */
+ DEFINE_RES_IRQ(gic_spi(32)), /* IRQ31 */
+};
+
+static struct platform_device irqpin3_device = {
+ .name = "renesas_intc_irqpin",
+ .id = 3,
+ .resource = irqpin3_resources,
+ .num_resources = ARRAY_SIZE(irqpin3_resources),
+ .dev = {
+ .platform_data = &irqpin3_platform_data,
+ },
+};
+
static struct platform_device *sh73a0_devices_dt[] __initdata = {
&scif0_device,
&scif1_device,
@@ -839,6 +961,10 @@ static struct platform_device *sh73a0_late_devices[] __initdata = {
&dma0_device,
&mpdma0_device,
&pmu_device,
+ &irqpin0_device,
+ &irqpin1_device,
+ &irqpin2_device,
+ &irqpin3_device,
};
#define SRCR2 IOMEM(0xe61580b0)
diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c
index 9cf1ab17afeb..0d1e4128d460 100644
--- a/arch/arm/mach-tegra/tegra.c
+++ b/arch/arm/mach-tegra/tegra.c
@@ -34,6 +34,7 @@
#include <linux/slab.h>
#include <linux/sys_soc.h>
#include <linux/usb/tegra_usb_phy.h>
+#include <linux/clk/tegra.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -85,6 +86,8 @@ static void __init tegra_dt_init(void)
struct soc_device *soc_dev;
struct device *parent = NULL;
+ tegra_clocks_apply_init_table();
+
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
goto out;
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f3976f9c404a..947bd9eca079 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -46,8 +46,12 @@ BIAS(slpm_in_nopull_wkup, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_INPUT|PIN_SLPM_PULL_NONE|PIN_SLPM_WAKEUP_ENABLE);
BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
+BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|
+ PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_lo_wkup, PIN_SLEEPMODE_ENABLED|
@@ -76,9 +80,6 @@ BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|
PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func)
#define DB8500_PIN_HOG(pin,conf) \
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf)
-#define DB8500_PIN_SLEEP(pin, conf, dev) \
- PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \
- pin, conf)
/* These are default states associated with device and changed runtime */
#define DB8500_MUX(group,func,dev) \
@@ -307,8 +308,23 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */
/* Mux in USB pins, drive STP high */
- DB8500_MUX("usb_a_1", "usb", "musb-ux500.0"),
- DB8500_PIN("GPIO257_AE29", out_hi, "musb-ux500.0"), /* STP */
+ /* USB default state */
+ DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"),
+ DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */
+ /* USB sleep state */
+ DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */
+ DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */
+ DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */
+ DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */
+ DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */
+ DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */
+ DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */
+ DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */
+ DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */
+ DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */
+ DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */
+ DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */
+
/* Mux in SPI2 pins on the "other C1" altfunction */
DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
@@ -316,9 +332,9 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
/* SPI2 idle state */
- DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
- DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
- DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
+ DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
+ DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
+ DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
/* SPI2 sleep state */
DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
@@ -745,6 +761,8 @@ static struct pinctrl_map __initdata snowball_pinmap[] = {
DB8500_PIN_HOG("GPIO21_AB3", out_hi),
/* Mux in "SM" which is used for the SMSC911x Ethernet adapter */
DB8500_MUX_HOG("sm_b_1", "sm"),
+ /* User LED */
+ DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi),
/* Drive RSTn_LAN high */
DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi),
/* Accelerometer/Magnetometer */
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index e3e94b2fa145..9b252934b206 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -7,6 +7,7 @@ config ARCH_VT8500
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select VT8500_TIMER
+ select PINCTRL
help
Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index 92ceb2436b60..4c8a84637594 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o
+obj-$(CONFIG_ARCH_VT8500) += vt8500.o
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
index 77611a6968d6..087787af62f1 100644
--- a/arch/arm/mach-vt8500/common.h
+++ b/arch/arm/mach-vt8500/common.h
@@ -18,13 +18,7 @@
#include <linux/of.h>
-int __init vt8500_irq_init(struct device_node *node,
- struct device_node *parent);
-
/* defined in drivers/clk/clk-vt8500.c */
void __init vtwm_clk_init(void __iomem *pmc_base);
-/* defined in irq.c */
-asmlinkage void vt8500_handle_irq(struct pt_regs *regs);
-
#endif
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 49e80053d828..1dd281efc020 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -20,6 +20,7 @@
#include <linux/clocksource.h>
#include <linux/io.h>
+#include <linux/irqchip.h>
#include <linux/pm.h>
#include <asm/mach-types.h>
@@ -166,16 +167,6 @@ void __init vt8500_init(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static const struct of_device_id vt8500_irq_match[] __initconst = {
- { .compatible = "via,vt8500-intc", .data = vt8500_irq_init, },
- { /* sentinel */ },
-};
-
-static void __init vt8500_init_irq(void)
-{
- of_irq_init(vt8500_irq_match);
-};
-
static const char * const vt8500_dt_compat[] = {
"via,vt8500",
"wm,wm8650",
@@ -187,10 +178,9 @@ static const char * const vt8500_dt_compat[] = {
DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
.dt_compat = vt8500_dt_compat,
.map_io = vt8500_map_io,
- .init_irq = vt8500_init_irq,
+ .init_irq = irqchip_init,
.init_machine = vt8500_init,
.init_time = clocksource_of_init,
.restart = vt8500_restart,
- .handle_irq = vt8500_handle_irq,
MACHINE_END
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 138b5891f4ef..cf3226b041f5 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -11,5 +11,6 @@ config ARCH_ZYNQ
select MIGHT_HAVE_CACHE_L2X0
select USE_OF
select SPARSE_IRQ
+ select CADENCE_TTC_TIMER
help
Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile
index 397268c1b250..320faedeb484 100644
--- a/arch/arm/mach-zynq/Makefile
+++ b/arch/arm/mach-zynq/Makefile
@@ -3,4 +3,4 @@
#
# Common support
-obj-y := common.o timer.o
+obj-y := common.o
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 5c8983218183..68e0907de5d0 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/clk/zynq.h>
+#include <linux/clocksource.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
@@ -77,7 +78,7 @@ static void __init xilinx_zynq_timer_init(void)
xilinx_zynq_clocks_init(slcr);
- xttcps_timer_init();
+ clocksource_of_init();
}
/**
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 8b4dbbaa01cf..5050bb10bb12 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -17,6 +17,4 @@
#ifndef __MACH_ZYNQ_COMMON_H__
#define __MACH_ZYNQ_COMMON_H__
-void __init xttcps_timer_init(void);
-
#endif
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
deleted file mode 100644
index f9fbc9c1e7a6..000000000000
--- a/arch/arm/mach-zynq/timer.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * This file contains driver for the Xilinx PS Timer Counter IP.
- *
- * Copyright (C) 2011 Xilinx
- *
- * based on arch/mips/kernel/time.c timer driver
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/interrupt.h>
-#include <linux/clockchips.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/slab.h>
-#include <linux/clk-provider.h>
-#include "common.h"
-
-/*
- * Timer Register Offset Definitions of Timer 1, Increment base address by 4
- * and use same offsets for Timer 2
- */
-#define XTTCPS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */
-#define XTTCPS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */
-#define XTTCPS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */
-#define XTTCPS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */
-#define XTTCPS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */
-#define XTTCPS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */
-
-#define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1
-
-/*
- * Setup the timers to use pre-scaling, using a fixed value for now that will
- * work across most input frequency, but it may need to be more dynamic
- */
-#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
-#define PRESCALE 2048 /* The exponent must match this */
-#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1)
-#define CLK_CNTRL_PRESCALE_EN 1
-#define CNT_CNTRL_RESET (1<<4)
-
-/**
- * struct xttcps_timer - This definition defines local timer structure
- *
- * @base_addr: Base address of timer
- **/
-struct xttcps_timer {
- void __iomem *base_addr;
-};
-
-struct xttcps_timer_clocksource {
- struct xttcps_timer xttc;
- struct clocksource cs;
-};
-
-#define to_xttcps_timer_clksrc(x) \
- container_of(x, struct xttcps_timer_clocksource, cs)
-
-struct xttcps_timer_clockevent {
- struct xttcps_timer xttc;
- struct clock_event_device ce;
- struct clk *clk;
-};
-
-#define to_xttcps_timer_clkevent(x) \
- container_of(x, struct xttcps_timer_clockevent, ce)
-
-/**
- * xttcps_set_interval - Set the timer interval value
- *
- * @timer: Pointer to the timer instance
- * @cycles: Timer interval ticks
- **/
-static void xttcps_set_interval(struct xttcps_timer *timer,
- unsigned long cycles)
-{
- u32 ctrl_reg;
-
- /* Disable the counter, set the counter value and re-enable counter */
- ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
- ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-
- __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET);
-
- /*
- * Reset the counter (0x10) so that it starts from 0, one-shot
- * mode makes this needed for timing to be right.
- */
- ctrl_reg |= CNT_CNTRL_RESET;
- ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-}
-
-/**
- * xttcps_clock_event_interrupt - Clock event timer interrupt handler
- *
- * @irq: IRQ number of the Timer
- * @dev_id: void pointer to the xttcps_timer instance
- *
- * returns: Always IRQ_HANDLED - success
- **/
-static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id)
-{
- struct xttcps_timer_clockevent *xttce = dev_id;
- struct xttcps_timer *timer = &xttce->xttc;
-
- /* Acknowledge the interrupt and call event handler */
- __raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET);
-
- xttce->ce.event_handler(&xttce->ce);
-
- return IRQ_HANDLED;
-}
-
-/**
- * __xttc_clocksource_read - Reads the timer counter register
- *
- * returns: Current timer counter register value
- **/
-static cycle_t __xttc_clocksource_read(struct clocksource *cs)
-{
- struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc;
-
- return (cycle_t)__raw_readl(timer->base_addr +
- XTTCPS_COUNT_VAL_OFFSET);
-}
-
-/**
- * xttcps_set_next_event - Sets the time interval for next event
- *
- * @cycles: Timer interval ticks
- * @evt: Address of clock event instance
- *
- * returns: Always 0 - success
- **/
-static int xttcps_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
- struct xttcps_timer *timer = &xttce->xttc;
-
- xttcps_set_interval(timer, cycles);
- return 0;
-}
-
-/**
- * xttcps_set_mode - Sets the mode of timer
- *
- * @mode: Mode to be set
- * @evt: Address of clock event instance
- **/
-static void xttcps_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
- struct xttcps_timer *timer = &xttce->xttc;
- u32 ctrl_reg;
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- xttcps_set_interval(timer,
- DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk),
- PRESCALE * HZ));
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- ctrl_reg = __raw_readl(timer->base_addr +
- XTTCPS_CNT_CNTRL_OFFSET);
- ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg,
- timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
- break;
- case CLOCK_EVT_MODE_RESUME:
- ctrl_reg = __raw_readl(timer->base_addr +
- XTTCPS_CNT_CNTRL_OFFSET);
- ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
- __raw_writel(ctrl_reg,
- timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
- break;
- }
-}
-
-static void __init zynq_ttc_setup_clocksource(struct device_node *np,
- void __iomem *base)
-{
- struct xttcps_timer_clocksource *ttccs;
- struct clk *clk;
- int err;
- u32 reg;
-
- ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL);
- if (WARN_ON(!ttccs))
- return;
-
- err = of_property_read_u32(np, "reg", &reg);
- if (WARN_ON(err))
- return;
-
- clk = of_clk_get_by_name(np, "cpu_1x");
- if (WARN_ON(IS_ERR(clk)))
- return;
-
- err = clk_prepare_enable(clk);
- if (WARN_ON(err))
- return;
-
- ttccs->xttc.base_addr = base + reg * 4;
-
- ttccs->cs.name = np->name;
- ttccs->cs.rating = 200;
- ttccs->cs.read = __xttc_clocksource_read;
- ttccs->cs.mask = CLOCKSOURCE_MASK(16);
- ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
-
- __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPS_IER_OFFSET);
- __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
- ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
- __raw_writel(CNT_CNTRL_RESET,
- ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
-
- err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE);
- if (WARN_ON(err))
- return;
-}
-
-static void __init zynq_ttc_setup_clockevent(struct device_node *np,
- void __iomem *base)
-{
- struct xttcps_timer_clockevent *ttcce;
- int err, irq;
- u32 reg;
-
- ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL);
- if (WARN_ON(!ttcce))
- return;
-
- err = of_property_read_u32(np, "reg", &reg);
- if (WARN_ON(err))
- return;
-
- ttcce->xttc.base_addr = base + reg * 4;
-
- ttcce->clk = of_clk_get_by_name(np, "cpu_1x");
- if (WARN_ON(IS_ERR(ttcce->clk)))
- return;
-
- err = clk_prepare_enable(ttcce->clk);
- if (WARN_ON(err))
- return;
-
- irq = irq_of_parse_and_map(np, 0);
- if (WARN_ON(!irq))
- return;
-
- ttcce->ce.name = np->name;
- ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- ttcce->ce.set_next_event = xttcps_set_next_event;
- ttcce->ce.set_mode = xttcps_set_mode;
- ttcce->ce.rating = 200;
- ttcce->ce.irq = irq;
- ttcce->ce.cpumask = cpu_possible_mask;
-
- __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
- __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
- ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
- __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPS_IER_OFFSET);
-
- err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER,
- np->name, ttcce);
- if (WARN_ON(err))
- return;
-
- clockevents_config_and_register(&ttcce->ce,
- clk_get_rate(ttcce->clk) / PRESCALE,
- 1, 0xfffe);
-}
-
-static const __initconst struct of_device_id zynq_ttc_match[] = {
- { .compatible = "xlnx,ttc-counter-clocksource",
- .data = zynq_ttc_setup_clocksource, },
- { .compatible = "xlnx,ttc-counter-clockevent",
- .data = zynq_ttc_setup_clockevent, },
- {}
-};
-
-/**
- * xttcps_timer_init - Initialize the timer
- *
- * Initializes the timer hardware and register the clock source and clock event
- * timers with Linux kernal timer framework
- **/
-void __init xttcps_timer_init(void)
-{
- struct device_node *np;
-
- for_each_compatible_node(np, NULL, "xlnx,ttc") {
- struct device_node *np_chld;
- void __iomem *base;
-
- base = of_iomap(np, 0);
- if (WARN_ON(!base))
- return;
-
- for_each_available_child_of_node(np, np_chld) {
- int (*cb)(struct device_node *np, void __iomem *base);
- const struct of_device_id *match;
-
- match = of_match_node(zynq_ttc_match, np_chld);
- if (match) {
- cb = match->data;
- cb(np_chld, base);
- }
- }
- }
-}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 91c2d72e689b..54d186106f9f 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -25,7 +25,7 @@ config PLAT_S5P
select PLAT_SAMSUNG
select S3C_GPIO_TRACK
select S5P_GPIO_DRVSTR
- select SAMSUNG_CLKSRC
+ select SAMSUNG_CLKSRC if !COMMON_CLK
select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_IRQ_VIC_TIMER
help
@@ -62,7 +62,7 @@ config S3C_LOWLEVEL_UART_PORT
# timer options
-config S5P_HRT
+config SAMSUNG_HRT
bool
select SAMSUNG_DEV_PWM
help
@@ -81,7 +81,7 @@ config SAMSUNG_CLKSRC
used by newer systems such as the S3C64XX.
config S5P_CLOCK
- def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+ def_bool (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
help
Support common clock part for ARCH_S5P and ARCH_EXYNOS SoCs
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 3a7c64d1814a..a23c460299a1 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -12,8 +12,7 @@ obj- :=
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
-obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o
-obj-$(CONFIG_S5P_HRT) += s5p-time.o
+obj-$(CONFIG_SAMSUNG_HRT) += samsung-time.o
obj-$(CONFIG_SAMSUNG_CLOCK) += clock.o
obj-$(CONFIG_SAMSUNG_CLOCK) += pwm-clock.o
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 33ad3f32c2b9..30c2fe243f76 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -1074,7 +1074,7 @@ struct platform_device s5p_device_onenand = {
/* PMU */
-#ifdef CONFIG_PLAT_S5P
+#if defined(CONFIG_PLAT_S5P) && !defined(CONFIG_ARCH_EXYNOS)
static struct resource s5p_pmu_resource[] = {
DEFINE_RES_IRQ(IRQ_PMU)
};
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 37703ef6dfc7..989fefe18be6 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -23,6 +23,9 @@ extern unsigned long samsung_cpu_id;
#define S3C24XX_CPU_ID 0x32400000
#define S3C24XX_CPU_MASK 0xFFF00000
+#define S3C2412_CPU_ID 0x32412000
+#define S3C2412_CPU_MASK 0xFFFFF000
+
#define S3C6400_CPU_ID 0x36400000
#define S3C6410_CPU_ID 0x36410000
#define S3C64XX_CPU_MASK 0xFFFFF000
@@ -53,6 +56,7 @@ static inline int is_samsung_##name(void) \
}
IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c6410, S3C6410_CPU_ID, S3C64XX_CPU_MASK)
IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
@@ -74,6 +78,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
# define soc_is_s3c24xx() 0
#endif
+#if defined(CONFIG_CPU_S3C2412)
+# define soc_is_s3c2412() is_samsung_s3c2412()
+#else
+# define soc_is_s3c2412() 0
+#endif
+
#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
# define soc_is_s3c64xx() (is_samsung_s3c6400() || is_samsung_s3c6410())
#else
@@ -173,7 +183,6 @@ extern void s3c_init_cpu(unsigned long idcode,
/* core initialisation functions */
-extern void s3c24xx_init_irq(void);
extern void s5p_init_irq(u32 *vic, u32 num_vic);
extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
@@ -192,10 +201,6 @@ extern void s3c24xx_init_uartdevs(char *name,
struct s3c24xx_uart_resources *res,
struct s3c2410_uartcfg *cfg, int no);
-/* timer for 2410/2440 */
-
-extern void s3c24xx_timer_init(void);
-
extern struct syscore_ops s3c2410_pm_syscore_ops;
extern struct syscore_ops s3c2412_pm_syscore_ops;
extern struct syscore_ops s3c2416_pm_syscore_ops;
diff --git a/arch/arm/plat-samsung/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h
deleted file mode 100644
index 9c96f3586ce0..000000000000
--- a/arch/arm/plat-samsung/include/plat/s5p-time.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h
- *
- * Copyright 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Header file for s5p time support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_TIME_H
-#define __ASM_PLAT_S5P_TIME_H __FILE__
-
-/* S5P HR-Timer Clock mode */
-enum s5p_timer_mode {
- S5P_PWM0,
- S5P_PWM1,
- S5P_PWM2,
- S5P_PWM3,
- S5P_PWM4,
-};
-
-struct s5p_timer_source {
- unsigned int event_id;
- unsigned int source_id;
-};
-
-/* Be able to sleep for atleast 4 seconds (usually more) */
-#define S5PTIMER_MIN_RANGE 4
-
-#define TCNT_MAX 0xffffffff
-#define NON_PERIODIC 0
-#define PERIODIC 1
-
-extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source);
-extern void s5p_timer_init(void);
-#endif /* __ASM_PLAT_S5P_TIME_H */
diff --git a/arch/arm/plat-samsung/include/plat/samsung-time.h b/arch/arm/plat-samsung/include/plat/samsung-time.h
new file mode 100644
index 000000000000..4cc99bb1f176
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/samsung-time.h
@@ -0,0 +1,53 @@
+/* linux/arch/arm/plat-samsung/include/plat/samsung-time.h
+ *
+ * Copyright 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * Header file for samsung s3c and s5p time support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_SAMSUNG_TIME_H
+#define __ASM_PLAT_SAMSUNG_TIME_H __FILE__
+
+/* SAMSUNG HR-Timer Clock mode */
+enum samsung_timer_mode {
+ SAMSUNG_PWM0,
+ SAMSUNG_PWM1,
+ SAMSUNG_PWM2,
+ SAMSUNG_PWM3,
+ SAMSUNG_PWM4,
+};
+
+struct samsung_timer_source {
+ unsigned int event_id;
+ unsigned int source_id;
+};
+
+/* Be able to sleep for atleast 4 seconds (usually more) */
+#define SAMSUNG_TIMER_MIN_RANGE 4
+
+#if defined(CONFIG_ARCH_S3C24XX) || defined(CONFIG_ARCH_S5PC100)
+#define TCNT_MAX 0xffff
+#define TSCALER_DIV 25
+#define TDIV 50
+#define TSIZE 16
+#else
+#define TCNT_MAX 0xffffffff
+#define TSCALER_DIV 2
+#define TDIV 2
+#define TSIZE 32
+#endif
+
+#define NON_PERIODIC 0
+#define PERIODIC 1
+
+extern void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source);
+
+extern void __init samsung_timer_init(void);
+
+#endif /* __ASM_PLAT_SAMSUNG_TIME_H */
diff --git a/arch/arm/plat-samsung/s5p-time.c b/arch/arm/plat-samsung/samsung-time.c
index e92510cf82ee..f899cbc9b288 100644
--- a/arch/arm/plat-samsung/s5p-time.c
+++ b/arch/arm/plat-samsung/samsung-time.c
@@ -2,7 +2,7 @@
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
- * S5P - Common hr-timer support
+ * samsung - Common hr-timer support (s3c and s5p)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -25,41 +25,41 @@
#include <mach/map.h>
#include <plat/devs.h>
#include <plat/regs-timer.h>
-#include <plat/s5p-time.h>
+#include <plat/samsung-time.h>
static struct clk *tin_event;
static struct clk *tin_source;
static struct clk *tdiv_event;
static struct clk *tdiv_source;
static struct clk *timerclk;
-static struct s5p_timer_source timer_source;
+static struct samsung_timer_source timer_source;
static unsigned long clock_count_per_tick;
-static void s5p_timer_resume(void);
+static void samsung_timer_resume(void);
-static void s5p_time_stop(enum s5p_timer_mode mode)
+static void samsung_time_stop(enum samsung_timer_mode mode)
{
unsigned long tcon;
tcon = __raw_readl(S3C2410_TCON);
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon &= ~S3C2410_TCON_T0START;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon &= ~S3C2410_TCON_T1START;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon &= ~S3C2410_TCON_T2START;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon &= ~S3C2410_TCON_T3START;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon &= ~S3C2410_TCON_T4START;
break;
@@ -70,7 +70,7 @@ static void s5p_time_stop(enum s5p_timer_mode mode)
__raw_writel(tcon, S3C2410_TCON);
}
-static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
+static void samsung_time_setup(enum samsung_timer_mode mode, unsigned long tcnt)
{
unsigned long tcon;
@@ -79,27 +79,27 @@ static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
tcnt--;
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon &= ~(0x0f << 0);
tcon |= S3C2410_TCON_T0MANUALUPD;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon &= ~(0x0f << 8);
tcon |= S3C2410_TCON_T1MANUALUPD;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon &= ~(0x0f << 12);
tcon |= S3C2410_TCON_T2MANUALUPD;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon &= ~(0x0f << 16);
tcon |= S3C2410_TCON_T3MANUALUPD;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon &= ~(0x07 << 20);
tcon |= S3C2410_TCON_T4MANUALUPD;
break;
@@ -114,14 +114,14 @@ static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt)
__raw_writel(tcon, S3C2410_TCON);
}
-static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
+static void samsung_time_start(enum samsung_timer_mode mode, bool periodic)
{
unsigned long tcon;
tcon = __raw_readl(S3C2410_TCON);
switch (mode) {
- case S5P_PWM0:
+ case SAMSUNG_PWM0:
tcon |= S3C2410_TCON_T0START;
tcon &= ~S3C2410_TCON_T0MANUALUPD;
@@ -131,7 +131,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
tcon &= ~S3C2410_TCON_T0RELOAD;
break;
- case S5P_PWM1:
+ case SAMSUNG_PWM1:
tcon |= S3C2410_TCON_T1START;
tcon &= ~S3C2410_TCON_T1MANUALUPD;
@@ -141,7 +141,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
tcon &= ~S3C2410_TCON_T1RELOAD;
break;
- case S5P_PWM2:
+ case SAMSUNG_PWM2:
tcon |= S3C2410_TCON_T2START;
tcon &= ~S3C2410_TCON_T2MANUALUPD;
@@ -151,7 +151,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
tcon &= ~S3C2410_TCON_T2RELOAD;
break;
- case S5P_PWM3:
+ case SAMSUNG_PWM3:
tcon |= S3C2410_TCON_T3START;
tcon &= ~S3C2410_TCON_T3MANUALUPD;
@@ -161,7 +161,7 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
tcon &= ~S3C2410_TCON_T3RELOAD;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
tcon |= S3C2410_TCON_T4START;
tcon &= ~S3C2410_TCON_T4MANUALUPD;
@@ -178,24 +178,24 @@ static void s5p_time_start(enum s5p_timer_mode mode, bool periodic)
__raw_writel(tcon, S3C2410_TCON);
}
-static int s5p_set_next_event(unsigned long cycles,
+static int samsung_set_next_event(unsigned long cycles,
struct clock_event_device *evt)
{
- s5p_time_setup(timer_source.event_id, cycles);
- s5p_time_start(timer_source.event_id, NON_PERIODIC);
+ samsung_time_setup(timer_source.event_id, cycles);
+ samsung_time_start(timer_source.event_id, NON_PERIODIC);
return 0;
}
-static void s5p_set_mode(enum clock_event_mode mode,
+static void samsung_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
- s5p_time_stop(timer_source.event_id);
+ samsung_time_stop(timer_source.event_id);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -206,24 +206,24 @@ static void s5p_set_mode(enum clock_event_mode mode,
break;
case CLOCK_EVT_MODE_RESUME:
- s5p_timer_resume();
+ samsung_timer_resume();
break;
}
}
-static void s5p_timer_resume(void)
+static void samsung_timer_resume(void)
{
/* event timer restart */
- s5p_time_setup(timer_source.event_id, clock_count_per_tick);
- s5p_time_start(timer_source.event_id, PERIODIC);
+ samsung_time_setup(timer_source.event_id, clock_count_per_tick);
+ samsung_time_start(timer_source.event_id, PERIODIC);
/* source timer restart */
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
}
-void __init s5p_set_timer_source(enum s5p_timer_mode event,
- enum s5p_timer_mode source)
+void __init samsung_set_timer_source(enum samsung_timer_mode event,
+ enum samsung_timer_mode source)
{
s3c_device_timer[event].dev.bus = &platform_bus_type;
s3c_device_timer[source].dev.bus = &platform_bus_type;
@@ -233,14 +233,14 @@ void __init s5p_set_timer_source(enum s5p_timer_mode event,
}
static struct clock_event_device time_event_device = {
- .name = "s5p_event_timer",
+ .name = "samsung_event_timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.rating = 200,
- .set_next_event = s5p_set_next_event,
- .set_mode = s5p_set_mode,
+ .set_next_event = samsung_set_next_event,
+ .set_mode = samsung_set_mode,
};
-static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
+static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
@@ -249,14 +249,14 @@ static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irqaction s5p_clock_event_irq = {
- .name = "s5p_time_irq",
+static struct irqaction samsung_clock_event_irq = {
+ .name = "samsung_time_irq",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s5p_clock_event_isr,
+ .handler = samsung_clock_event_isr,
.dev_id = &time_event_device,
};
-static void __init s5p_clockevent_init(void)
+static void __init samsung_clockevent_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
@@ -267,8 +267,8 @@ static void __init s5p_clockevent_init(void)
tscaler = clk_get_parent(tdiv_event);
- clk_set_rate(tscaler, pclk / 2);
- clk_set_rate(tdiv_event, pclk / 2);
+ clk_set_rate(tscaler, pclk / TSCALER_DIV);
+ clk_set_rate(tdiv_event, pclk / TDIV);
clk_set_parent(tin_event, tdiv_event);
clock_rate = clk_get_rate(tin_event);
@@ -278,22 +278,22 @@ static void __init s5p_clockevent_init(void)
clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
irq_number = timer_source.event_id + IRQ_TIMER0;
- setup_irq(irq_number, &s5p_clock_event_irq);
+ setup_irq(irq_number, &samsung_clock_event_irq);
}
-static void __iomem *s5p_timer_reg(void)
+static void __iomem *samsung_timer_reg(void)
{
unsigned long offset = 0;
switch (timer_source.source_id) {
- case S5P_PWM0:
- case S5P_PWM1:
- case S5P_PWM2:
- case S5P_PWM3:
+ case SAMSUNG_PWM0:
+ case SAMSUNG_PWM1:
+ case SAMSUNG_PWM2:
+ case SAMSUNG_PWM3:
offset = (timer_source.source_id * 0x0c) + 0x14;
break;
- case S5P_PWM4:
+ case SAMSUNG_PWM4:
offset = 0x40;
break;
@@ -312,9 +312,9 @@ static void __iomem *s5p_timer_reg(void)
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by U300 implementation.)
*/
-static u32 notrace s5p_read_sched_clock(void)
+static u32 notrace samsung_read_sched_clock(void)
{
- void __iomem *reg = s5p_timer_reg();
+ void __iomem *reg = samsung_timer_reg();
if (!reg)
return 0;
@@ -322,29 +322,29 @@ static u32 notrace s5p_read_sched_clock(void)
return ~__raw_readl(reg);
}
-static void __init s5p_clocksource_init(void)
+static void __init samsung_clocksource_init(void)
{
unsigned long pclk;
unsigned long clock_rate;
pclk = clk_get_rate(timerclk);
- clk_set_rate(tdiv_source, pclk / 2);
+ clk_set_rate(tdiv_source, pclk / TDIV);
clk_set_parent(tin_source, tdiv_source);
clock_rate = clk_get_rate(tin_source);
- s5p_time_setup(timer_source.source_id, TCNT_MAX);
- s5p_time_start(timer_source.source_id, PERIODIC);
+ samsung_time_setup(timer_source.source_id, TCNT_MAX);
+ samsung_time_start(timer_source.source_id, PERIODIC);
- setup_sched_clock(s5p_read_sched_clock, 32, clock_rate);
+ setup_sched_clock(samsung_read_sched_clock, TSIZE, clock_rate);
- if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer",
- clock_rate, 250, 32, clocksource_mmio_readl_down))
- panic("s5p_clocksource_timer: can't register clocksource\n");
+ if (clocksource_mmio_init(samsung_timer_reg(), "samsung_clocksource_timer",
+ clock_rate, 250, TSIZE, clocksource_mmio_readl_down))
+ panic("samsung_clocksource_timer: can't register clocksource\n");
}
-static void __init s5p_timer_resources(void)
+static void __init samsung_timer_resources(void)
{
unsigned long event_id = timer_source.event_id;
@@ -386,9 +386,9 @@ static void __init s5p_timer_resources(void)
clk_enable(tin_source);
}
-void __init s5p_timer_init(void)
+void __init samsung_timer_init(void)
{
- s5p_timer_resources();
- s5p_clockevent_init();
- s5p_clocksource_init();
+ samsung_timer_resources();
+ samsung_clockevent_init();
+ samsung_clocksource_init();
}
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
deleted file mode 100644
index 73defd00c3e4..000000000000
--- a/arch/arm/plat-samsung/time.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/* linux/arch/arm/plat-samsung/time.c
- *
- * Copyright (C) 2003-2005 Simtec Electronics
- * Ben Dooks, <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/irq.h>
-#include <mach/map.h>
-#include <plat/regs-timer.h>
-#include <mach/regs-irq.h>
-#include <asm/mach/time.h>
-#include <mach/tick.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static unsigned long timer_startval;
-static unsigned long timer_usec_ticks;
-
-#ifndef TICK_MAX
-#define TICK_MAX (0xffff)
-#endif
-
-#define TIMER_USEC_SHIFT 16
-
-/* we use the shifted arithmetic to work out the ratio of timer ticks
- * to usecs, as often the peripheral clock is not a nice even multiple
- * of 1MHz.
- *
- * shift of 14 and 15 are too low for the 12MHz, 16 seems to be ok
- * for the current HZ value of 200 without producing overflows.
- *
- * Original patch by Dimitry Andric, updated by Ben Dooks
-*/
-
-
-/* timer_mask_usec_ticks
- *
- * given a clock and divisor, make the value to pass into timer_ticks_to_usec
- * to scale the ticks into usecs
-*/
-
-static inline unsigned long
-timer_mask_usec_ticks(unsigned long scaler, unsigned long pclk)
-{
- unsigned long den = pclk / 1000;
-
- return ((1000 << TIMER_USEC_SHIFT) * scaler + (den >> 1)) / den;
-}
-
-/* timer_ticks_to_usec
- *
- * convert timer ticks to usec.
-*/
-
-static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
-{
- unsigned long res;
-
- res = ticks * timer_usec_ticks;
- res += 1 << (TIMER_USEC_SHIFT - 4); /* round up slightly */
-
- return res >> TIMER_USEC_SHIFT;
-}
-
-/***
- * Returns microsecond since last clock interrupt. Note that interrupts
- * will have been disabled by do_gettimeoffset()
- * IRQs are disabled before entering here from do_gettimeofday()
- */
-
-static u32 s3c2410_gettimeoffset(void)
-{
- unsigned long tdone;
- unsigned long tval;
-
- /* work out how many ticks have gone since last timer interrupt */
-
- tval = __raw_readl(S3C2410_TCNTO(4));
- tdone = timer_startval - tval;
-
- /* check to see if there is an interrupt pending */
-
- if (s3c24xx_ostimer_pending()) {
- /* re-read the timer, and try and fix up for the missed
- * interrupt. Note, the interrupt may go off before the
- * timer has re-loaded from wrapping.
- */
-
- tval = __raw_readl(S3C2410_TCNTO(4));
- tdone = timer_startval - tval;
-
- if (tval != 0)
- tdone += timer_startval;
- }
-
- return timer_ticks_to_usec(tdone) * 1000;
-}
-
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-s3c2410_timer_interrupt(int irq, void *dev_id)
-{
- timer_tick();
- return IRQ_HANDLED;
-}
-
-static struct irqaction s3c2410_timer_irq = {
- .name = "S3C2410 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = s3c2410_timer_interrupt,
-};
-
-#define use_tclk1_12() ( \
- machine_is_bast() || \
- machine_is_vr1000() || \
- machine_is_anubis() || \
- machine_is_osiris())
-
-static struct clk *tin;
-static struct clk *tdiv;
-static struct clk *timerclk;
-
-/*
- * Set up timer interrupt, and return the current time in seconds.
- *
- * Currently we only use timer4, as it is the only timer which has no
- * other function that can be exploited externally
- */
-static void s3c2410_timer_setup (void)
-{
- unsigned long tcon;
- unsigned long tcnt;
- unsigned long tcfg1;
- unsigned long tcfg0;
-
- tcnt = TICK_MAX; /* default value for tcnt */
-
- /* configure the system for whichever machine is in use */
-
- if (use_tclk1_12()) {
- /* timer is at 12MHz, scaler is 1 */
- timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
- tcnt = 12000000 / HZ;
-
- tcfg1 = __raw_readl(S3C2410_TCFG1);
- tcfg1 &= ~S3C2410_TCFG1_MUX4_MASK;
- tcfg1 |= S3C2410_TCFG1_MUX4_TCLK1;
- __raw_writel(tcfg1, S3C2410_TCFG1);
- } else {
- unsigned long pclk;
- struct clk *tscaler;
-
- /* for the h1940 (and others), we use the pclk from the core
- * to generate the timer values. since values around 50 to
- * 70MHz are not values we can directly generate the timer
- * value from, we need to pre-scale and divide before using it.
- *
- * for instance, using 50.7MHz and dividing by 6 gives 8.45MHz
- * (8.45 ticks per usec)
- */
-
- pclk = clk_get_rate(timerclk);
-
- /* configure clock tick */
-
- timer_usec_ticks = timer_mask_usec_ticks(6, pclk);
-
- tscaler = clk_get_parent(tdiv);
-
- clk_set_rate(tscaler, pclk / 3);
- clk_set_rate(tdiv, pclk / 6);
- clk_set_parent(tin, tdiv);
-
- tcnt = clk_get_rate(tin) / HZ;
- }
-
- tcon = __raw_readl(S3C2410_TCON);
- tcfg0 = __raw_readl(S3C2410_TCFG0);
- tcfg1 = __raw_readl(S3C2410_TCFG1);
-
- /* timers reload after counting zero, so reduce the count by 1 */
-
- tcnt--;
-
- printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n",
- tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks);
-
- /* check to see if timer is within 16bit range... */
- if (tcnt > TICK_MAX) {
- panic("setup_timer: HZ is too small, cannot configure timer!");
- return;
- }
-
- __raw_writel(tcfg1, S3C2410_TCFG1);
- __raw_writel(tcfg0, S3C2410_TCFG0);
-
- timer_startval = tcnt;
- __raw_writel(tcnt, S3C2410_TCNTB(4));
-
- /* ensure timer is stopped... */
-
- tcon &= ~(7<<20);
- tcon |= S3C2410_TCON_T4RELOAD;
- tcon |= S3C2410_TCON_T4MANUALUPD;
-
- __raw_writel(tcon, S3C2410_TCON);
- __raw_writel(tcnt, S3C2410_TCNTB(4));
- __raw_writel(tcnt, S3C2410_TCMPB(4));
-
- /* start the timer running */
- tcon |= S3C2410_TCON_T4START;
- tcon &= ~S3C2410_TCON_T4MANUALUPD;
- __raw_writel(tcon, S3C2410_TCON);
-}
-
-static void __init s3c2410_timer_resources(void)
-{
- struct platform_device tmpdev;
-
- tmpdev.dev.bus = &platform_bus_type;
- tmpdev.id = 4;
-
- timerclk = clk_get(NULL, "timers");
- if (IS_ERR(timerclk))
- panic("failed to get clock for system timer");
-
- clk_enable(timerclk);
-
- if (!use_tclk1_12()) {
- tmpdev.id = 4;
- tmpdev.dev.init_name = "s3c24xx-pwm.4";
- tin = clk_get(&tmpdev.dev, "pwm-tin");
- if (IS_ERR(tin))
- panic("failed to get pwm-tin clock for system timer");
-
- tdiv = clk_get(&tmpdev.dev, "pwm-tdiv");
- if (IS_ERR(tdiv))
- panic("failed to get pwm-tdiv clock for system timer");
- }
-
- clk_enable(tin);
-}
-
-static struct syscore_ops s3c24xx_syscore_ops = {
- .resume = s3c2410_timer_setup,
-};
-
-void __init s3c24xx_timer_init(void)
-{
- arch_gettimeoffset = s3c2410_gettimeoffset;
-
- s3c2410_timer_resources();
- s3c2410_timer_setup();
- setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
- register_syscore_ops(&s3c24xx_syscore_ops);
-}
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index b323d8d3185b..7c2f6685bf43 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1453,7 +1453,7 @@ static struct resource atmel_lcdfb0_resource[] = {
},
};
DEFINE_DEV_DATA(atmel_lcdfb, 0);
-DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
+DEV_CLK(hclk, atmel_lcdfb0, hsb, 7);
static struct clk atmel_lcdfb0_pixclk = {
.name = "lcdc_clk",
.dev = &atmel_lcdfb0_device.dev,
@@ -1530,6 +1530,8 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
memcpy(info, data, sizeof(struct atmel_lcdfb_info));
info->default_monspecs = monspecs;
+ pdev->name = "at32ap-lcdfb";
+
platform_device_register(pdev);
return pdev;
@@ -2246,7 +2248,7 @@ static __initdata struct clk *init_clocks[] = {
&atmel_twi0_pclk,
&atmel_mci0_pclk,
#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002)
- &atmel_lcdfb0_hck1,
+ &atmel_lcdfb0_hclk,
&atmel_lcdfb0_pixclk,
#endif
&ssc0_pclk,
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 8d96238549fa..9953a42809ec 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -164,4 +164,6 @@ source "drivers/irqchip/Kconfig"
source "drivers/ipack/Kconfig"
+source "drivers/reset/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 8e57688ebd95..130abc1dfd65 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -37,6 +37,9 @@ obj-$(CONFIG_XEN) += xen/
# regulators early, since some subsystems rely on them to initialize
obj-$(CONFIG_REGULATOR) += regulator/
+# reset controllers early, since gpu drivers might rely on them to initialize
+obj-$(CONFIG_RESET_CONTROLLER) += reset/
+
# tty/ comes before char/ so that the VT console is the boot-time
# default.
obj-y += tty/
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index e7f7fe9b2f09..137d3e730f86 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o
obj-$(CONFIG_ARCH_TEGRA) += tegra/
+obj-$(CONFIG_PLAT_SAMSUNG) += samsung/
obj-$(CONFIG_X86) += x86/
diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
new file mode 100644
index 000000000000..b7c232e67425
--- /dev/null
+++ b/drivers/clk/samsung/Makefile
@@ -0,0 +1,8 @@
+#
+# Samsung Clock specific Makefile
+#
+
+obj-$(CONFIG_COMMON_CLK) += clk.o clk-pll.o
+obj-$(CONFIG_ARCH_EXYNOS4) += clk-exynos4.o
+obj-$(CONFIG_SOC_EXYNOS5250) += clk-exynos5250.o
+obj-$(CONFIG_SOC_EXYNOS5440) += clk-exynos5440.o
diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
new file mode 100644
index 000000000000..71046694d9dd
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos4.c
@@ -0,0 +1,1091 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for all Exynos4 SoCs.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <plat/cpu.h>
+#include "clk.h"
+#include "clk-pll.h"
+
+/* Exynos4 clock controller register offsets */
+#define SRC_LEFTBUS 0x4200
+#define DIV_LEFTBUS 0x4500
+#define GATE_IP_LEFTBUS 0x4800
+#define E4X12_GATE_IP_IMAGE 0x4930
+#define SRC_RIGHTBUS 0x8200
+#define DIV_RIGHTBUS 0x8500
+#define GATE_IP_RIGHTBUS 0x8800
+#define E4X12_GATE_IP_PERIR 0x8960
+#define EPLL_LOCK 0xc010
+#define VPLL_LOCK 0xc020
+#define EPLL_CON0 0xc110
+#define EPLL_CON1 0xc114
+#define EPLL_CON2 0xc118
+#define VPLL_CON0 0xc120
+#define VPLL_CON1 0xc124
+#define VPLL_CON2 0xc128
+#define SRC_TOP0 0xc210
+#define SRC_TOP1 0xc214
+#define SRC_CAM 0xc220
+#define SRC_TV 0xc224
+#define SRC_MFC 0xcc28
+#define SRC_G3D 0xc22c
+#define E4210_SRC_IMAGE 0xc230
+#define SRC_LCD0 0xc234
+#define E4210_SRC_LCD1 0xc238
+#define E4X12_SRC_ISP 0xc238
+#define SRC_MAUDIO 0xc23c
+#define SRC_FSYS 0xc240
+#define SRC_PERIL0 0xc250
+#define SRC_PERIL1 0xc254
+#define E4X12_SRC_CAM1 0xc258
+#define SRC_MASK_TOP 0xc310
+#define SRC_MASK_CAM 0xc320
+#define SRC_MASK_TV 0xc324
+#define SRC_MASK_LCD0 0xc334
+#define E4210_SRC_MASK_LCD1 0xc338
+#define E4X12_SRC_MASK_ISP 0xc338
+#define SRC_MASK_MAUDIO 0xc33c
+#define SRC_MASK_FSYS 0xc340
+#define SRC_MASK_PERIL0 0xc350
+#define SRC_MASK_PERIL1 0xc354
+#define DIV_TOP 0xc510
+#define DIV_CAM 0xc520
+#define DIV_TV 0xc524
+#define DIV_MFC 0xc528
+#define DIV_G3D 0xc52c
+#define DIV_IMAGE 0xc530
+#define DIV_LCD0 0xc534
+#define E4210_DIV_LCD1 0xc538
+#define E4X12_DIV_ISP 0xc538
+#define DIV_MAUDIO 0xc53c
+#define DIV_FSYS0 0xc540
+#define DIV_FSYS1 0xc544
+#define DIV_FSYS2 0xc548
+#define DIV_FSYS3 0xc54c
+#define DIV_PERIL0 0xc550
+#define DIV_PERIL1 0xc554
+#define DIV_PERIL2 0xc558
+#define DIV_PERIL3 0xc55c
+#define DIV_PERIL4 0xc560
+#define DIV_PERIL5 0xc564
+#define E4X12_DIV_CAM1 0xc568
+#define GATE_SCLK_CAM 0xc820
+#define GATE_IP_CAM 0xc920
+#define GATE_IP_TV 0xc924
+#define GATE_IP_MFC 0xc928
+#define GATE_IP_G3D 0xc92c
+#define E4210_GATE_IP_IMAGE 0xc930
+#define GATE_IP_LCD0 0xc934
+#define E4210_GATE_IP_LCD1 0xc938
+#define E4X12_GATE_IP_ISP 0xc938
+#define E4X12_GATE_IP_MAUDIO 0xc93c
+#define GATE_IP_FSYS 0xc940
+#define GATE_IP_GPS 0xc94c
+#define GATE_IP_PERIL 0xc950
+#define E4210_GATE_IP_PERIR 0xc960
+#define GATE_BLOCK 0xc970
+#define E4X12_MPLL_CON0 0x10108
+#define SRC_DMC 0x10200
+#define SRC_MASK_DMC 0x10300
+#define DIV_DMC0 0x10500
+#define DIV_DMC1 0x10504
+#define GATE_IP_DMC 0x10900
+#define APLL_CON0 0x14100
+#define E4210_MPLL_CON0 0x14108
+#define SRC_CPU 0x14200
+#define DIV_CPU0 0x14500
+#define DIV_CPU1 0x14504
+#define GATE_SCLK_CPU 0x14800
+#define GATE_IP_CPU 0x14900
+#define E4X12_DIV_ISP0 0x18300
+#define E4X12_DIV_ISP1 0x18304
+#define E4X12_GATE_ISP0 0x18800
+#define E4X12_GATE_ISP1 0x18804
+
+/* the exynos4 soc type */
+enum exynos4_soc {
+ EXYNOS4210,
+ EXYNOS4X12,
+};
+
+/*
+ * Let each supported clock get a unique id. This id is used to lookup the clock
+ * for device tree based platforms. The clocks are categorized into three
+ * sections: core, sclk gate and bus interface gate clocks.
+ *
+ * When adding a new clock to this list, it is advised to choose a clock
+ * category and add it to the end of that category. That is because the the
+ * device tree source file is referring to these ids and any change in the
+ * sequence number of existing clocks will require corresponding change in the
+ * device tree files. This limitation would go away when pre-processor support
+ * for dtc would be available.
+ */
+enum exynos4_clks {
+ none,
+
+ /* core clocks */
+ xxti, xusbxti, fin_pll, fout_apll, fout_mpll, fout_epll, fout_vpll,
+ sclk_apll, sclk_mpll, sclk_epll, sclk_vpll, arm_clk, aclk200, aclk100,
+ aclk160, aclk133, mout_mpll_user_t, mout_mpll_user_c, mout_core,
+ mout_apll, /* 20 */
+
+ /* gate for special clocks (sclk) */
+ sclk_fimc0 = 128, sclk_fimc1, sclk_fimc2, sclk_fimc3, sclk_cam0,
+ sclk_cam1, sclk_csis0, sclk_csis1, sclk_hdmi, sclk_mixer, sclk_dac,
+ sclk_pixel, sclk_fimd0, sclk_mdnie0, sclk_mdnie_pwm0, sclk_mipi0,
+ sclk_audio0, sclk_mmc0, sclk_mmc1, sclk_mmc2, sclk_mmc3, sclk_mmc4,
+ sclk_sata, sclk_uart0, sclk_uart1, sclk_uart2, sclk_uart3, sclk_uart4,
+ sclk_audio1, sclk_audio2, sclk_spdif, sclk_spi0, sclk_spi1, sclk_spi2,
+ sclk_slimbus, sclk_fimd1, sclk_mipi1, sclk_pcm1, sclk_pcm2, sclk_i2s1,
+ sclk_i2s2, sclk_mipihsi, sclk_mfc, sclk_pcm0, sclk_g3d, sclk_pwm_isp,
+ sclk_spi0_isp, sclk_spi1_isp, sclk_uart_isp,
+
+ /* gate clocks */
+ fimc0 = 256, fimc1, fimc2, fimc3, csis0, csis1, jpeg, smmu_fimc0,
+ smmu_fimc1, smmu_fimc2, smmu_fimc3, smmu_jpeg, vp, mixer, tvenc, hdmi,
+ smmu_tv, mfc, smmu_mfcl, smmu_mfcr, g3d, g2d, rotator, mdma, smmu_g2d,
+ smmu_rotator, smmu_mdma, fimd0, mie0, mdnie0, dsim0, smmu_fimd0, fimd1,
+ mie1, dsim1, smmu_fimd1, pdma0, pdma1, pcie_phy, sata_phy, tsi, sdmmc0,
+ sdmmc1, sdmmc2, sdmmc3, sdmmc4, sata, sromc, usb_host, usb_device, pcie,
+ onenand, nfcon, smmu_pcie, gps, smmu_gps, uart0, uart1, uart2, uart3,
+ uart4, i2c0, i2c1, i2c2, i2c3, i2c4, i2c5, i2c6, i2c7, i2c_hdmi, tsadc,
+ spi0, spi1, spi2, i2s1, i2s2, pcm0, i2s0, pcm1, pcm2, pwm, slimbus,
+ spdif, ac97, modemif, chipid, sysreg, hdmi_cec, mct, wdt, rtc, keyif,
+ audss, mipi_hsi, mdma2, pixelasyncm0, pixelasyncm1, fimc_lite0,
+ fimc_lite1, ppmuispx, ppmuispmx, fimc_isp, fimc_drc, fimc_fd, mcuisp,
+ gicisp, smmu_isp, smmu_drc, smmu_fd, smmu_lite0, smmu_lite1, mcuctl_isp,
+ mpwm_isp, i2c0_isp, i2c1_isp, mtcadc_isp, pwm_isp, wdt_isp, uart_isp,
+ asyncaxim, smmu_ispcx, spi0_isp, spi1_isp, pwm_isp_sclk, spi0_isp_sclk,
+ spi1_isp_sclk, uart_isp_sclk,
+
+ /* mux clocks */
+ mout_fimc0 = 384, mout_fimc1, mout_fimc2, mout_fimc3, mout_cam0,
+ mout_cam1, mout_csis0, mout_csis1, mout_g3d0, mout_g3d1, mout_g3d,
+ aclk400_mcuisp,
+
+ /* div clocks */
+ div_isp0 = 450, div_isp1, div_mcuisp0, div_mcuisp1, div_aclk200,
+ div_aclk400_mcuisp,
+
+ nr_clks,
+};
+
+/*
+ * list of controller registers to be saved and restored during a
+ * suspend/resume cycle.
+ */
+static __initdata unsigned long exynos4210_clk_save[] = {
+ E4210_SRC_IMAGE,
+ E4210_SRC_LCD1,
+ E4210_SRC_MASK_LCD1,
+ E4210_DIV_LCD1,
+ E4210_GATE_IP_IMAGE,
+ E4210_GATE_IP_LCD1,
+ E4210_GATE_IP_PERIR,
+ E4210_MPLL_CON0,
+};
+
+static __initdata unsigned long exynos4x12_clk_save[] = {
+ E4X12_GATE_IP_IMAGE,
+ E4X12_GATE_IP_PERIR,
+ E4X12_SRC_CAM1,
+ E4X12_DIV_ISP,
+ E4X12_DIV_CAM1,
+ E4X12_MPLL_CON0,
+};
+
+static __initdata unsigned long exynos4_clk_regs[] = {
+ SRC_LEFTBUS,
+ DIV_LEFTBUS,
+ GATE_IP_LEFTBUS,
+ SRC_RIGHTBUS,
+ DIV_RIGHTBUS,
+ GATE_IP_RIGHTBUS,
+ EPLL_CON0,
+ EPLL_CON1,
+ EPLL_CON2,
+ VPLL_CON0,
+ VPLL_CON1,
+ VPLL_CON2,
+ SRC_TOP0,
+ SRC_TOP1,
+ SRC_CAM,
+ SRC_TV,
+ SRC_MFC,
+ SRC_G3D,
+ SRC_LCD0,
+ SRC_MAUDIO,
+ SRC_FSYS,
+ SRC_PERIL0,
+ SRC_PERIL1,
+ SRC_MASK_TOP,
+ SRC_MASK_CAM,
+ SRC_MASK_TV,
+ SRC_MASK_LCD0,
+ SRC_MASK_MAUDIO,
+ SRC_MASK_FSYS,
+ SRC_MASK_PERIL0,
+ SRC_MASK_PERIL1,
+ DIV_TOP,
+ DIV_CAM,
+ DIV_TV,
+ DIV_MFC,
+ DIV_G3D,
+ DIV_IMAGE,
+ DIV_LCD0,
+ DIV_MAUDIO,
+ DIV_FSYS0,
+ DIV_FSYS1,
+ DIV_FSYS2,
+ DIV_FSYS3,
+ DIV_PERIL0,
+ DIV_PERIL1,
+ DIV_PERIL2,
+ DIV_PERIL3,
+ DIV_PERIL4,
+ DIV_PERIL5,
+ GATE_SCLK_CAM,
+ GATE_IP_CAM,
+ GATE_IP_TV,
+ GATE_IP_MFC,
+ GATE_IP_G3D,
+ GATE_IP_LCD0,
+ GATE_IP_FSYS,
+ GATE_IP_GPS,
+ GATE_IP_PERIL,
+ GATE_BLOCK,
+ SRC_MASK_DMC,
+ SRC_DMC,
+ DIV_DMC0,
+ DIV_DMC1,
+ GATE_IP_DMC,
+ APLL_CON0,
+ SRC_CPU,
+ DIV_CPU0,
+ DIV_CPU1,
+ GATE_SCLK_CPU,
+ GATE_IP_CPU,
+};
+
+/* list of all parent clock list */
+PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
+PNAME(mout_mpll_p) = { "fin_pll", "fout_mpll", };
+PNAME(mout_epll_p) = { "fin_pll", "fout_epll", };
+PNAME(mout_vpllsrc_p) = { "fin_pll", "sclk_hdmi24m", };
+PNAME(mout_vpll_p) = { "fin_pll", "fout_vpll", };
+PNAME(sclk_evpll_p) = { "sclk_epll", "sclk_vpll", };
+PNAME(mout_mfc_p) = { "mout_mfc0", "mout_mfc1", };
+PNAME(mout_g3d_p) = { "mout_g3d0", "mout_g3d1", };
+PNAME(mout_g2d_p) = { "mout_g2d0", "mout_g2d1", };
+PNAME(mout_hdmi_p) = { "sclk_pixel", "sclk_hdmiphy", };
+PNAME(mout_jpeg_p) = { "mout_jpeg0", "mout_jpeg1", };
+PNAME(mout_spdif_p) = { "sclk_audio0", "sclk_audio1", "sclk_audio2",
+ "spdif_extclk", };
+PNAME(mout_onenand_p) = {"aclk133", "aclk160", };
+PNAME(mout_onenand1_p) = {"mout_onenand", "sclk_vpll", };
+
+/* Exynos 4210-specific parent groups */
+PNAME(sclk_vpll_p4210) = { "mout_vpllsrc", "fout_vpll", };
+PNAME(mout_core_p4210) = { "mout_apll", "sclk_mpll", };
+PNAME(sclk_ampll_p4210) = { "sclk_mpll", "sclk_apll", };
+PNAME(group1_p4210) = { "xxti", "xusbxti", "sclk_hdmi24m",
+ "sclk_usbphy0", "none", "sclk_hdmiphy",
+ "sclk_mpll", "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio0_p4210) = { "cdclk0", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll",
+ "sclk_epll", "sclk_vpll" };
+PNAME(mout_audio1_p4210) = { "cdclk1", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll",
+ "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio2_p4210) = { "cdclk2", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti", "sclk_mpll",
+ "sclk_epll", "sclk_vpll", };
+PNAME(mout_mixer_p4210) = { "sclk_dac", "sclk_hdmi", };
+PNAME(mout_dac_p4210) = { "sclk_vpll", "sclk_hdmiphy", };
+
+/* Exynos 4x12-specific parent groups */
+PNAME(mout_mpll_user_p4x12) = { "fin_pll", "sclk_mpll", };
+PNAME(mout_core_p4x12) = { "mout_apll", "mout_mpll_user_c", };
+PNAME(sclk_ampll_p4x12) = { "mout_mpll_user_t", "sclk_apll", };
+PNAME(group1_p4x12) = { "xxti", "xusbxti", "sclk_hdmi24m", "sclk_usbphy0",
+ "none", "sclk_hdmiphy", "mout_mpll_user_t",
+ "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio0_p4x12) = { "cdclk0", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti",
+ "mout_mpll_user_t", "sclk_epll", "sclk_vpll" };
+PNAME(mout_audio1_p4x12) = { "cdclk1", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti",
+ "mout_mpll_user_t", "sclk_epll", "sclk_vpll", };
+PNAME(mout_audio2_p4x12) = { "cdclk2", "none", "sclk_hdmi24m",
+ "sclk_usbphy0", "xxti", "xusbxti",
+ "mout_mpll_user_t", "sclk_epll", "sclk_vpll", };
+PNAME(aclk_p4412) = { "mout_mpll_user_t", "sclk_apll", };
+PNAME(mout_user_aclk400_mcuisp_p4x12) = {"fin_pll", "div_aclk400_mcuisp", };
+PNAME(mout_user_aclk200_p4x12) = {"fin_pll", "div_aclk200", };
+PNAME(mout_user_aclk266_gps_p4x12) = {"fin_pll", "div_aclk266_gps", };
+
+/* fixed rate clocks generated outside the soc */
+struct samsung_fixed_rate_clock exynos4_fixed_rate_ext_clks[] __initdata = {
+ FRATE(xxti, "xxti", NULL, CLK_IS_ROOT, 0),
+ FRATE(xusbxti, "xusbxti", NULL, CLK_IS_ROOT, 0),
+};
+
+/* fixed rate clocks generated inside the soc */
+struct samsung_fixed_rate_clock exynos4_fixed_rate_clks[] __initdata = {
+ FRATE(none, "sclk_hdmi24m", NULL, CLK_IS_ROOT, 24000000),
+ FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 27000000),
+ FRATE(none, "sclk_usbphy0", NULL, CLK_IS_ROOT, 48000000),
+};
+
+struct samsung_fixed_rate_clock exynos4210_fixed_rate_clks[] __initdata = {
+ FRATE(none, "sclk_usbphy1", NULL, CLK_IS_ROOT, 48000000),
+};
+
+/* list of mux clocks supported in all exynos4 soc's */
+struct samsung_mux_clock exynos4_mux_clks[] __initdata = {
+ MUX_F(mout_apll, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_hdmi", mout_hdmi_p, SRC_TV, 0, 1),
+ MUX(none, "mout_mfc1", sclk_evpll_p, SRC_MFC, 4, 1),
+ MUX(none, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
+ MUX_F(mout_g3d1, "mout_g3d1", sclk_evpll_p, SRC_G3D, 4, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX_F(mout_g3d, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_spdif", mout_spdif_p, SRC_PERIL1, 8, 2),
+ MUX(none, "mout_onenand1", mout_onenand1_p, SRC_TOP0, 0, 1),
+ MUX_A(sclk_epll, "sclk_epll", mout_epll_p, SRC_TOP0, 4, 1, "sclk_epll"),
+ MUX(none, "mout_onenand", mout_onenand_p, SRC_TOP0, 28, 1),
+};
+
+/* list of mux clocks supported in exynos4210 soc */
+struct samsung_mux_clock exynos4210_mux_clks[] __initdata = {
+ MUX(none, "mout_aclk200", sclk_ampll_p4210, SRC_TOP0, 12, 1),
+ MUX(none, "mout_aclk100", sclk_ampll_p4210, SRC_TOP0, 16, 1),
+ MUX(none, "mout_aclk160", sclk_ampll_p4210, SRC_TOP0, 20, 1),
+ MUX(none, "mout_aclk133", sclk_ampll_p4210, SRC_TOP0, 24, 1),
+ MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
+ MUX(none, "mout_mixer", mout_mixer_p4210, SRC_TV, 4, 1),
+ MUX(none, "mout_dac", mout_dac_p4210, SRC_TV, 8, 1),
+ MUX(none, "mout_g2d0", sclk_ampll_p4210, E4210_SRC_IMAGE, 0, 1),
+ MUX(none, "mout_g2d1", sclk_evpll_p, E4210_SRC_IMAGE, 4, 1),
+ MUX(none, "mout_g2d", mout_g2d_p, E4210_SRC_IMAGE, 8, 1),
+ MUX(none, "mout_fimd1", group1_p4210, E4210_SRC_LCD1, 0, 4),
+ MUX(none, "mout_mipi1", group1_p4210, E4210_SRC_LCD1, 12, 4),
+ MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p, SRC_CPU, 8, 1, "sclk_mpll"),
+ MUX_A(mout_core, "mout_core", mout_core_p4210,
+ SRC_CPU, 16, 1, "mout_core"),
+ MUX_A(sclk_vpll, "sclk_vpll", sclk_vpll_p4210,
+ SRC_TOP0, 8, 1, "sclk_vpll"),
+ MUX(mout_fimc0, "mout_fimc0", group1_p4210, SRC_CAM, 0, 4),
+ MUX(mout_fimc1, "mout_fimc1", group1_p4210, SRC_CAM, 4, 4),
+ MUX(mout_fimc2, "mout_fimc2", group1_p4210, SRC_CAM, 8, 4),
+ MUX(mout_fimc3, "mout_fimc3", group1_p4210, SRC_CAM, 12, 4),
+ MUX(mout_cam0, "mout_cam0", group1_p4210, SRC_CAM, 16, 4),
+ MUX(mout_cam1, "mout_cam1", group1_p4210, SRC_CAM, 20, 4),
+ MUX(mout_csis0, "mout_csis0", group1_p4210, SRC_CAM, 24, 4),
+ MUX(mout_csis1, "mout_csis1", group1_p4210, SRC_CAM, 28, 4),
+ MUX(none, "mout_mfc0", sclk_ampll_p4210, SRC_MFC, 0, 1),
+ MUX_F(mout_g3d0, "mout_g3d0", sclk_ampll_p4210, SRC_G3D, 0, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_fimd0", group1_p4210, SRC_LCD0, 0, 4),
+ MUX(none, "mout_mipi0", group1_p4210, SRC_LCD0, 12, 4),
+ MUX(none, "mout_audio0", mout_audio0_p4210, SRC_MAUDIO, 0, 4),
+ MUX(none, "mout_mmc0", group1_p4210, SRC_FSYS, 0, 4),
+ MUX(none, "mout_mmc1", group1_p4210, SRC_FSYS, 4, 4),
+ MUX(none, "mout_mmc2", group1_p4210, SRC_FSYS, 8, 4),
+ MUX(none, "mout_mmc3", group1_p4210, SRC_FSYS, 12, 4),
+ MUX(none, "mout_mmc4", group1_p4210, SRC_FSYS, 16, 4),
+ MUX(none, "mout_sata", sclk_ampll_p4210, SRC_FSYS, 24, 1),
+ MUX(none, "mout_uart0", group1_p4210, SRC_PERIL0, 0, 4),
+ MUX(none, "mout_uart1", group1_p4210, SRC_PERIL0, 4, 4),
+ MUX(none, "mout_uart2", group1_p4210, SRC_PERIL0, 8, 4),
+ MUX(none, "mout_uart3", group1_p4210, SRC_PERIL0, 12, 4),
+ MUX(none, "mout_uart4", group1_p4210, SRC_PERIL0, 16, 4),
+ MUX(none, "mout_audio1", mout_audio1_p4210, SRC_PERIL1, 0, 4),
+ MUX(none, "mout_audio2", mout_audio2_p4210, SRC_PERIL1, 4, 4),
+ MUX(none, "mout_spi0", group1_p4210, SRC_PERIL1, 16, 4),
+ MUX(none, "mout_spi1", group1_p4210, SRC_PERIL1, 20, 4),
+ MUX(none, "mout_spi2", group1_p4210, SRC_PERIL1, 24, 4),
+};
+
+/* list of mux clocks supported in exynos4x12 soc */
+struct samsung_mux_clock exynos4x12_mux_clks[] __initdata = {
+ MUX(mout_mpll_user_c, "mout_mpll_user_c", mout_mpll_user_p4x12,
+ SRC_CPU, 24, 1),
+ MUX(none, "mout_aclk266_gps", aclk_p4412, SRC_TOP1, 4, 1),
+ MUX(none, "mout_aclk400_mcuisp", aclk_p4412, SRC_TOP1, 8, 1),
+ MUX(mout_mpll_user_t, "mout_mpll_user_t", mout_mpll_user_p4x12,
+ SRC_TOP1, 12, 1),
+ MUX(none, "mout_user_aclk266_gps", mout_user_aclk266_gps_p4x12,
+ SRC_TOP1, 16, 1),
+ MUX(aclk200, "aclk200", mout_user_aclk200_p4x12, SRC_TOP1, 20, 1),
+ MUX(aclk400_mcuisp, "aclk400_mcuisp", mout_user_aclk400_mcuisp_p4x12,
+ SRC_TOP1, 24, 1),
+ MUX(none, "mout_aclk200", aclk_p4412, SRC_TOP0, 12, 1),
+ MUX(none, "mout_aclk100", aclk_p4412, SRC_TOP0, 16, 1),
+ MUX(none, "mout_aclk160", aclk_p4412, SRC_TOP0, 20, 1),
+ MUX(none, "mout_aclk133", aclk_p4412, SRC_TOP0, 24, 1),
+ MUX(none, "mout_mdnie0", group1_p4x12, SRC_LCD0, 4, 4),
+ MUX(none, "mout_mdnie_pwm0", group1_p4x12, SRC_LCD0, 8, 4),
+ MUX(none, "mout_sata", sclk_ampll_p4x12, SRC_FSYS, 24, 1),
+ MUX(none, "mout_jpeg0", sclk_ampll_p4x12, E4X12_SRC_CAM1, 0, 1),
+ MUX(none, "mout_jpeg1", sclk_evpll_p, E4X12_SRC_CAM1, 4, 1),
+ MUX(none, "mout_jpeg", mout_jpeg_p, E4X12_SRC_CAM1, 8, 1),
+ MUX_A(sclk_mpll, "sclk_mpll", mout_mpll_p,
+ SRC_DMC, 12, 1, "sclk_mpll"),
+ MUX_A(sclk_vpll, "sclk_vpll", mout_vpll_p,
+ SRC_TOP0, 8, 1, "sclk_vpll"),
+ MUX(mout_core, "mout_core", mout_core_p4x12, SRC_CPU, 16, 1),
+ MUX(mout_fimc0, "mout_fimc0", group1_p4x12, SRC_CAM, 0, 4),
+ MUX(mout_fimc1, "mout_fimc1", group1_p4x12, SRC_CAM, 4, 4),
+ MUX(mout_fimc2, "mout_fimc2", group1_p4x12, SRC_CAM, 8, 4),
+ MUX(mout_fimc3, "mout_fimc3", group1_p4x12, SRC_CAM, 12, 4),
+ MUX(mout_cam0, "mout_cam0", group1_p4x12, SRC_CAM, 16, 4),
+ MUX(mout_cam1, "mout_cam1", group1_p4x12, SRC_CAM, 20, 4),
+ MUX(mout_csis0, "mout_csis0", group1_p4x12, SRC_CAM, 24, 4),
+ MUX(mout_csis1, "mout_csis1", group1_p4x12, SRC_CAM, 28, 4),
+ MUX(none, "mout_mfc0", sclk_ampll_p4x12, SRC_MFC, 0, 1),
+ MUX_F(mout_g3d0, "mout_g3d0", sclk_ampll_p4x12, SRC_G3D, 0, 1,
+ CLK_SET_RATE_PARENT, 0),
+ MUX(none, "mout_fimd0", group1_p4x12, SRC_LCD0, 0, 4),
+ MUX(none, "mout_mipi0", group1_p4x12, SRC_LCD0, 12, 4),
+ MUX(none, "mout_audio0", mout_audio0_p4x12, SRC_MAUDIO, 0, 4),
+ MUX(none, "mout_mmc0", group1_p4x12, SRC_FSYS, 0, 4),
+ MUX(none, "mout_mmc1", group1_p4x12, SRC_FSYS, 4, 4),
+ MUX(none, "mout_mmc2", group1_p4x12, SRC_FSYS, 8, 4),
+ MUX(none, "mout_mmc3", group1_p4x12, SRC_FSYS, 12, 4),
+ MUX(none, "mout_mmc4", group1_p4x12, SRC_FSYS, 16, 4),
+ MUX(none, "mout_mipihsi", aclk_p4412, SRC_FSYS, 24, 1),
+ MUX(none, "mout_uart0", group1_p4x12, SRC_PERIL0, 0, 4),
+ MUX(none, "mout_uart1", group1_p4x12, SRC_PERIL0, 4, 4),
+ MUX(none, "mout_uart2", group1_p4x12, SRC_PERIL0, 8, 4),
+ MUX(none, "mout_uart3", group1_p4x12, SRC_PERIL0, 12, 4),
+ MUX(none, "mout_uart4", group1_p4x12, SRC_PERIL0, 16, 4),
+ MUX(none, "mout_audio1", mout_audio1_p4x12, SRC_PERIL1, 0, 4),
+ MUX(none, "mout_audio2", mout_audio2_p4x12, SRC_PERIL1, 4, 4),
+ MUX(none, "mout_spi0", group1_p4x12, SRC_PERIL1, 16, 4),
+ MUX(none, "mout_spi1", group1_p4x12, SRC_PERIL1, 20, 4),
+ MUX(none, "mout_spi2", group1_p4x12, SRC_PERIL1, 24, 4),
+ MUX(none, "mout_pwm_isp", group1_p4x12, E4X12_SRC_ISP, 0, 4),
+ MUX(none, "mout_spi0_isp", group1_p4x12, E4X12_SRC_ISP, 4, 4),
+ MUX(none, "mout_spi1_isp", group1_p4x12, E4X12_SRC_ISP, 8, 4),
+ MUX(none, "mout_uart_isp", group1_p4x12, E4X12_SRC_ISP, 12, 4),
+};
+
+/* list of divider clocks supported in all exynos4 soc's */
+struct samsung_div_clock exynos4_div_clks[] __initdata = {
+ DIV(none, "div_core", "mout_core", DIV_CPU0, 0, 3),
+ DIV(none, "div_core2", "div_core", DIV_CPU0, 28, 3),
+ DIV(none, "div_fimc0", "mout_fimc0", DIV_CAM, 0, 4),
+ DIV(none, "div_fimc1", "mout_fimc1", DIV_CAM, 4, 4),
+ DIV(none, "div_fimc2", "mout_fimc2", DIV_CAM, 8, 4),
+ DIV(none, "div_fimc3", "mout_fimc3", DIV_CAM, 12, 4),
+ DIV(none, "div_cam0", "mout_cam0", DIV_CAM, 16, 4),
+ DIV(none, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+ DIV(none, "div_csis0", "mout_csis0", DIV_CAM, 24, 4),
+ DIV(none, "div_csis1", "mout_csis1", DIV_CAM, 28, 4),
+ DIV(sclk_mfc, "sclk_mfc", "mout_mfc", DIV_MFC, 0, 4),
+ DIV_F(none, "div_g3d", "mout_g3d", DIV_G3D, 0, 4,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(none, "div_fimd0", "mout_fimd0", DIV_LCD0, 0, 4),
+ DIV(none, "div_mipi0", "mout_mipi0", DIV_LCD0, 16, 4),
+ DIV(none, "div_audio0", "mout_audio0", DIV_MAUDIO, 0, 4),
+ DIV(sclk_pcm0, "sclk_pcm0", "sclk_audio0", DIV_MAUDIO, 4, 8),
+ DIV(none, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+ DIV(none, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+ DIV(none, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
+ DIV(none, "div_mmc3", "mout_mmc3", DIV_FSYS2, 16, 4),
+ DIV(sclk_pixel, "sclk_pixel", "sclk_vpll", DIV_TV, 0, 4),
+ DIV(aclk100, "aclk100", "mout_aclk100", DIV_TOP, 4, 4),
+ DIV(aclk160, "aclk160", "mout_aclk160", DIV_TOP, 8, 3),
+ DIV(aclk133, "aclk133", "mout_aclk133", DIV_TOP, 12, 3),
+ DIV(none, "div_onenand", "mout_onenand1", DIV_TOP, 16, 3),
+ DIV(sclk_slimbus, "sclk_slimbus", "sclk_epll", DIV_PERIL3, 4, 4),
+ DIV(sclk_pcm1, "sclk_pcm1", "sclk_audio1", DIV_PERIL4, 4, 8),
+ DIV(sclk_pcm2, "sclk_pcm2", "sclk_audio2", DIV_PERIL4, 20, 8),
+ DIV(sclk_i2s1, "sclk_i2s1", "sclk_audio1", DIV_PERIL5, 0, 6),
+ DIV(sclk_i2s2, "sclk_i2s2", "sclk_audio2", DIV_PERIL5, 8, 6),
+ DIV(none, "div_mmc4", "mout_mmc4", DIV_FSYS3, 0, 4),
+ DIV(none, "div_mmc_pre4", "div_mmc4", DIV_FSYS3, 8, 8),
+ DIV(none, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+ DIV(none, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+ DIV(none, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
+ DIV(none, "div_uart3", "mout_uart3", DIV_PERIL0, 12, 4),
+ DIV(none, "div_uart4", "mout_uart4", DIV_PERIL0, 16, 4),
+ DIV(none, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+ DIV(none, "div_spi_pre0", "div_spi0", DIV_PERIL1, 8, 8),
+ DIV(none, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+ DIV(none, "div_spi_pre1", "div_spi1", DIV_PERIL1, 24, 8),
+ DIV(none, "div_spi2", "mout_spi2", DIV_PERIL2, 0, 4),
+ DIV(none, "div_spi_pre2", "div_spi2", DIV_PERIL2, 8, 8),
+ DIV(none, "div_audio1", "mout_audio1", DIV_PERIL4, 0, 4),
+ DIV(none, "div_audio2", "mout_audio2", DIV_PERIL4, 16, 4),
+ DIV_A(arm_clk, "arm_clk", "div_core2", DIV_CPU0, 28, 3, "arm_clk"),
+ DIV_A(sclk_apll, "sclk_apll", "mout_apll",
+ DIV_CPU0, 24, 3, "sclk_apll"),
+ DIV_F(none, "div_mipi_pre0", "div_mipi0", DIV_LCD0, 20, 4,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre0", "div_mmc0", DIV_FSYS1, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre1", "div_mmc1", DIV_FSYS1, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre2", "div_mmc2", DIV_FSYS2, 8, 8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV_F(none, "div_mmc_pre3", "div_mmc3", DIV_FSYS2, 24, 8,
+ CLK_SET_RATE_PARENT, 0),
+};
+
+/* list of divider clocks supported in exynos4210 soc */
+struct samsung_div_clock exynos4210_div_clks[] __initdata = {
+ DIV(aclk200, "aclk200", "mout_aclk200", DIV_TOP, 0, 3),
+ DIV(none, "div_g2d", "mout_g2d", DIV_IMAGE, 0, 4),
+ DIV(none, "div_fimd1", "mout_fimd1", E4210_DIV_LCD1, 0, 4),
+ DIV(none, "div_mipi1", "mout_mipi1", E4210_DIV_LCD1, 16, 4),
+ DIV(none, "div_sata", "mout_sata", DIV_FSYS0, 20, 4),
+ DIV_F(none, "div_mipi_pre1", "div_mipi1", E4210_DIV_LCD1, 20, 4,
+ CLK_SET_RATE_PARENT, 0),
+};
+
+/* list of divider clocks supported in exynos4x12 soc */
+struct samsung_div_clock exynos4x12_div_clks[] __initdata = {
+ DIV(none, "div_mdnie0", "mout_mdnie0", DIV_LCD0, 4, 4),
+ DIV(none, "div_mdnie_pwm0", "mout_mdnie_pwm0", DIV_LCD0, 8, 4),
+ DIV(none, "div_mdnie_pwm_pre0", "div_mdnie_pwm0", DIV_LCD0, 12, 4),
+ DIV(none, "div_mipihsi", "mout_mipihsi", DIV_FSYS0, 20, 4),
+ DIV(none, "div_jpeg", "mout_jpeg", E4X12_DIV_CAM1, 0, 4),
+ DIV(div_aclk200, "div_aclk200", "mout_aclk200", DIV_TOP, 0, 3),
+ DIV(none, "div_aclk266_gps", "mout_aclk266_gps", DIV_TOP, 20, 3),
+ DIV(div_aclk400_mcuisp, "div_aclk400_mcuisp", "mout_aclk400_mcuisp",
+ DIV_TOP, 24, 3),
+ DIV(none, "div_pwm_isp", "mout_pwm_isp", E4X12_DIV_ISP, 0, 4),
+ DIV(none, "div_spi0_isp", "mout_spi0_isp", E4X12_DIV_ISP, 4, 4),
+ DIV(none, "div_spi0_isp_pre", "div_spi0_isp", E4X12_DIV_ISP, 8, 8),
+ DIV(none, "div_spi1_isp", "mout_spi1_isp", E4X12_DIV_ISP, 16, 4),
+ DIV(none, "div_spi1_isp_pre", "div_spi1_isp", E4X12_DIV_ISP, 20, 8),
+ DIV(none, "div_uart_isp", "mout_uart_isp", E4X12_DIV_ISP, 28, 4),
+ DIV(div_isp0, "div_isp0", "aclk200", E4X12_DIV_ISP0, 0, 3),
+ DIV(div_isp1, "div_isp1", "aclk200", E4X12_DIV_ISP0, 4, 3),
+ DIV(none, "div_mpwm", "div_isp1", E4X12_DIV_ISP1, 0, 3),
+ DIV(div_mcuisp0, "div_mcuisp0", "aclk400_mcuisp", E4X12_DIV_ISP1, 4, 3),
+ DIV(div_mcuisp1, "div_mcuisp1", "div_mcuisp0", E4X12_DIV_ISP1, 8, 3),
+};
+
+/* list of gate clocks supported in all exynos4 soc's */
+struct samsung_gate_clock exynos4_gate_clks[] __initdata = {
+ /*
+ * After all Exynos4 based platforms are migrated to use device tree,
+ * the device name and clock alias names specified below for some
+ * of the clocks can be removed.
+ */
+ GATE(sclk_hdmi, "sclk_hdmi", "mout_hdmi", SRC_MASK_TV, 0, 0, 0),
+ GATE(sclk_spdif, "sclk_spdif", "mout_spdif", SRC_MASK_PERIL1, 8, 0, 0),
+ GATE(jpeg, "jpeg", "aclk160", GATE_IP_CAM, 6, 0, 0),
+ GATE(mie0, "mie0", "aclk160", GATE_IP_LCD0, 1, 0, 0),
+ GATE(dsim0, "dsim0", "aclk160", GATE_IP_LCD0, 3, 0, 0),
+ GATE(fimd1, "fimd1", "aclk160", E4210_GATE_IP_LCD1, 0, 0, 0),
+ GATE(mie1, "mie1", "aclk160", E4210_GATE_IP_LCD1, 1, 0, 0),
+ GATE(dsim1, "dsim1", "aclk160", E4210_GATE_IP_LCD1, 3, 0, 0),
+ GATE(smmu_fimd1, "smmu_fimd1", "aclk160", E4210_GATE_IP_LCD1, 4, 0, 0),
+ GATE(tsi, "tsi", "aclk133", GATE_IP_FSYS, 4, 0, 0),
+ GATE(sromc, "sromc", "aclk133", GATE_IP_FSYS, 11, 0, 0),
+ GATE(sclk_g3d, "sclk_g3d", "div_g3d", GATE_IP_G3D, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(usb_device, "usb_device", "aclk133", GATE_IP_FSYS, 13, 0, 0),
+ GATE(onenand, "onenand", "aclk133", GATE_IP_FSYS, 15, 0, 0),
+ GATE(nfcon, "nfcon", "aclk133", GATE_IP_FSYS, 16, 0, 0),
+ GATE(gps, "gps", "aclk133", GATE_IP_GPS, 0, 0, 0),
+ GATE(smmu_gps, "smmu_gps", "aclk133", GATE_IP_GPS, 1, 0, 0),
+ GATE(slimbus, "slimbus", "aclk100", GATE_IP_PERIL, 25, 0, 0),
+ GATE(sclk_cam0, "sclk_cam0", "div_cam0", GATE_SCLK_CAM, 4,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_cam1, "sclk_cam1", "div_cam1", GATE_SCLK_CAM, 5,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mipi0, "sclk_mipi0", "div_mipi_pre0",
+ SRC_MASK_LCD0, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio0, "sclk_audio0", "div_audio0", SRC_MASK_MAUDIO, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_audio1, "sclk_audio1", "div_audio1", SRC_MASK_PERIL1, 0,
+ CLK_SET_RATE_PARENT, 0),
+ GATE_D(vp, "s5p-mixer", "vp", "aclk160", GATE_IP_TV, 0, 0, 0),
+ GATE_D(mixer, "s5p-mixer", "mixer", "aclk160", GATE_IP_TV, 1, 0, 0),
+ GATE_D(hdmi, "exynos4-hdmi", "hdmi", "aclk160", GATE_IP_TV, 3, 0, 0),
+ GATE_A(pwm, "pwm", "aclk100", GATE_IP_PERIL, 24, 0, 0, "timers"),
+ GATE_A(sdmmc4, "sdmmc4", "aclk133", GATE_IP_FSYS, 9, 0, 0, "biu"),
+ GATE_A(usb_host, "usb_host", "aclk133",
+ GATE_IP_FSYS, 12, 0, 0, "usbhost"),
+ GATE_DA(sclk_fimc0, "exynos4-fimc.0", "sclk_fimc0", "div_fimc0",
+ SRC_MASK_CAM, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_fimc1, "exynos4-fimc.1", "sclk_fimc1", "div_fimc1",
+ SRC_MASK_CAM, 4, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_fimc2, "exynos4-fimc.2", "sclk_fimc2", "div_fimc2",
+ SRC_MASK_CAM, 8, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_fimc3, "exynos4-fimc.3", "sclk_fimc3", "div_fimc3",
+ SRC_MASK_CAM, 12, CLK_SET_RATE_PARENT, 0, "sclk_fimc"),
+ GATE_DA(sclk_csis0, "s5p-mipi-csis.0", "sclk_csis0", "div_csis0",
+ SRC_MASK_CAM, 24, CLK_SET_RATE_PARENT, 0, "sclk_csis"),
+ GATE_DA(sclk_csis1, "s5p-mipi-csis.1", "sclk_csis1", "div_csis1",
+ SRC_MASK_CAM, 28, CLK_SET_RATE_PARENT, 0, "sclk_csis"),
+ GATE_DA(sclk_fimd0, "exynos4-fb.0", "sclk_fimd0", "div_fimd0",
+ SRC_MASK_LCD0, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimd"),
+ GATE_DA(sclk_mmc0, "exynos4-sdhci.0", "sclk_mmc0", "div_mmc_pre0",
+ SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc1, "exynos4-sdhci.1", "sclk_mmc1", "div_mmc_pre1",
+ SRC_MASK_FSYS, 4, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc2, "exynos4-sdhci.2", "sclk_mmc2", "div_mmc_pre2",
+ SRC_MASK_FSYS, 8, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc3, "exynos4-sdhci.3", "sclk_mmc3", "div_mmc_pre3",
+ SRC_MASK_FSYS, 12, CLK_SET_RATE_PARENT, 0,
+ "mmc_busclk.2"),
+ GATE_DA(sclk_mmc4, NULL, "sclk_mmc4", "div_mmc_pre4",
+ SRC_MASK_FSYS, 16, CLK_SET_RATE_PARENT, 0, "ciu"),
+ GATE_DA(sclk_uart0, "exynos4210-uart.0", "uclk0", "div_uart0",
+ SRC_MASK_PERIL0, 0, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart1, "exynos4210-uart.1", "uclk1", "div_uart1",
+ SRC_MASK_PERIL0, 4, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart2, "exynos4210-uart.2", "uclk2", "div_uart2",
+ SRC_MASK_PERIL0, 8, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart3, "exynos4210-uart.3", "uclk3", "div_uart3",
+ SRC_MASK_PERIL0, 12, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE_DA(sclk_uart4, "exynos4210-uart.4", "uclk4", "div_uart4",
+ SRC_MASK_PERIL0, 16, CLK_SET_RATE_PARENT,
+ 0, "clk_uart_baud0"),
+ GATE(sclk_audio2, "sclk_audio2", "div_audio2", SRC_MASK_PERIL1, 4,
+ CLK_SET_RATE_PARENT, 0),
+ GATE_DA(sclk_spi0, "exynos4210-spi.0", "sclk_spi0", "div_spi_pre0",
+ SRC_MASK_PERIL1, 16, CLK_SET_RATE_PARENT,
+ 0, "spi_busclk0"),
+ GATE_DA(sclk_spi1, "exynos4210-spi.1", "sclk_spi1", "div_spi_pre1",
+ SRC_MASK_PERIL1, 20, CLK_SET_RATE_PARENT,
+ 0, "spi_busclk0"),
+ GATE_DA(sclk_spi2, "exynos4210-spi.2", "sclk_spi2", "div_spi_pre2",
+ SRC_MASK_PERIL1, 24, CLK_SET_RATE_PARENT,
+ 0, "spi_busclk0"),
+ GATE_DA(fimc0, "exynos4-fimc.0", "fimc0", "aclk160",
+ GATE_IP_CAM, 0, 0, 0, "fimc"),
+ GATE_DA(fimc1, "exynos4-fimc.1", "fimc1", "aclk160",
+ GATE_IP_CAM, 1, 0, 0, "fimc"),
+ GATE_DA(fimc2, "exynos4-fimc.2", "fimc2", "aclk160",
+ GATE_IP_CAM, 2, 0, 0, "fimc"),
+ GATE_DA(fimc3, "exynos4-fimc.3", "fimc3", "aclk160",
+ GATE_IP_CAM, 3, 0, 0, "fimc"),
+ GATE_DA(csis0, "s5p-mipi-csis.0", "csis0", "aclk160",
+ GATE_IP_CAM, 4, 0, 0, "fimc"),
+ GATE_DA(csis1, "s5p-mipi-csis.1", "csis1", "aclk160",
+ GATE_IP_CAM, 5, 0, 0, "fimc"),
+ GATE_DA(smmu_fimc0, "exynos-sysmmu.5", "smmu_fimc0", "aclk160",
+ GATE_IP_CAM, 7, 0, 0, "sysmmu"),
+ GATE_DA(smmu_fimc1, "exynos-sysmmu.6", "smmu_fimc1", "aclk160",
+ GATE_IP_CAM, 8, 0, 0, "sysmmu"),
+ GATE_DA(smmu_fimc2, "exynos-sysmmu.7", "smmu_fimc2", "aclk160",
+ GATE_IP_CAM, 9, 0, 0, "sysmmu"),
+ GATE_DA(smmu_fimc3, "exynos-sysmmu.8", "smmu_fimc3", "aclk160",
+ GATE_IP_CAM, 10, 0, 0, "sysmmu"),
+ GATE_DA(smmu_jpeg, "exynos-sysmmu.3", "smmu_jpeg", "aclk160",
+ GATE_IP_CAM, 11, 0, 0, "sysmmu"),
+ GATE(pixelasyncm0, "pxl_async0", "aclk160", GATE_IP_CAM, 17, 0, 0),
+ GATE(pixelasyncm1, "pxl_async1", "aclk160", GATE_IP_CAM, 18, 0, 0),
+ GATE_DA(smmu_tv, "exynos-sysmmu.2", "smmu_tv", "aclk160",
+ GATE_IP_TV, 4, 0, 0, "sysmmu"),
+ GATE_DA(mfc, "s5p-mfc", "mfc", "aclk100", GATE_IP_MFC, 0, 0, 0, "mfc"),
+ GATE_DA(smmu_mfcl, "exynos-sysmmu.0", "smmu_mfcl", "aclk100",
+ GATE_IP_MFC, 1, 0, 0, "sysmmu"),
+ GATE_DA(smmu_mfcr, "exynos-sysmmu.1", "smmu_mfcr", "aclk100",
+ GATE_IP_MFC, 2, 0, 0, "sysmmu"),
+ GATE_DA(fimd0, "exynos4-fb.0", "fimd0", "aclk160",
+ GATE_IP_LCD0, 0, 0, 0, "fimd"),
+ GATE_DA(smmu_fimd0, "exynos-sysmmu.10", "smmu_fimd0", "aclk160",
+ GATE_IP_LCD0, 4, 0, 0, "sysmmu"),
+ GATE_DA(pdma0, "dma-pl330.0", "pdma0", "aclk133",
+ GATE_IP_FSYS, 0, 0, 0, "dma"),
+ GATE_DA(pdma1, "dma-pl330.1", "pdma1", "aclk133",
+ GATE_IP_FSYS, 1, 0, 0, "dma"),
+ GATE_DA(sdmmc0, "exynos4-sdhci.0", "sdmmc0", "aclk133",
+ GATE_IP_FSYS, 5, 0, 0, "hsmmc"),
+ GATE_DA(sdmmc1, "exynos4-sdhci.1", "sdmmc1", "aclk133",
+ GATE_IP_FSYS, 6, 0, 0, "hsmmc"),
+ GATE_DA(sdmmc2, "exynos4-sdhci.2", "sdmmc2", "aclk133",
+ GATE_IP_FSYS, 7, 0, 0, "hsmmc"),
+ GATE_DA(sdmmc3, "exynos4-sdhci.3", "sdmmc3", "aclk133",
+ GATE_IP_FSYS, 8, 0, 0, "hsmmc"),
+ GATE_DA(uart0, "exynos4210-uart.0", "uart0", "aclk100",
+ GATE_IP_PERIL, 0, 0, 0, "uart"),
+ GATE_DA(uart1, "exynos4210-uart.1", "uart1", "aclk100",
+ GATE_IP_PERIL, 1, 0, 0, "uart"),
+ GATE_DA(uart2, "exynos4210-uart.2", "uart2", "aclk100",
+ GATE_IP_PERIL, 2, 0, 0, "uart"),
+ GATE_DA(uart3, "exynos4210-uart.3", "uart3", "aclk100",
+ GATE_IP_PERIL, 3, 0, 0, "uart"),
+ GATE_DA(uart4, "exynos4210-uart.4", "uart4", "aclk100",
+ GATE_IP_PERIL, 4, 0, 0, "uart"),
+ GATE_DA(i2c0, "s3c2440-i2c.0", "i2c0", "aclk100",
+ GATE_IP_PERIL, 6, 0, 0, "i2c"),
+ GATE_DA(i2c1, "s3c2440-i2c.1", "i2c1", "aclk100",
+ GATE_IP_PERIL, 7, 0, 0, "i2c"),
+ GATE_DA(i2c2, "s3c2440-i2c.2", "i2c2", "aclk100",
+ GATE_IP_PERIL, 8, 0, 0, "i2c"),
+ GATE_DA(i2c3, "s3c2440-i2c.3", "i2c3", "aclk100",
+ GATE_IP_PERIL, 9, 0, 0, "i2c"),
+ GATE_DA(i2c4, "s3c2440-i2c.4", "i2c4", "aclk100",
+ GATE_IP_PERIL, 10, 0, 0, "i2c"),
+ GATE_DA(i2c5, "s3c2440-i2c.5", "i2c5", "aclk100",
+ GATE_IP_PERIL, 11, 0, 0, "i2c"),
+ GATE_DA(i2c6, "s3c2440-i2c.6", "i2c6", "aclk100",
+ GATE_IP_PERIL, 12, 0, 0, "i2c"),
+ GATE_DA(i2c7, "s3c2440-i2c.7", "i2c7", "aclk100",
+ GATE_IP_PERIL, 13, 0, 0, "i2c"),
+ GATE_DA(i2c_hdmi, "s3c2440-hdmiphy-i2c", "i2c-hdmi", "aclk100",
+ GATE_IP_PERIL, 14, 0, 0, "i2c"),
+ GATE_DA(spi0, "exynos4210-spi.0", "spi0", "aclk100",
+ GATE_IP_PERIL, 16, 0, 0, "spi"),
+ GATE_DA(spi1, "exynos4210-spi.1", "spi1", "aclk100",
+ GATE_IP_PERIL, 17, 0, 0, "spi"),
+ GATE_DA(spi2, "exynos4210-spi.2", "spi2", "aclk100",
+ GATE_IP_PERIL, 18, 0, 0, "spi"),
+ GATE_DA(i2s1, "samsung-i2s.1", "i2s1", "aclk100",
+ GATE_IP_PERIL, 20, 0, 0, "iis"),
+ GATE_DA(i2s2, "samsung-i2s.2", "i2s2", "aclk100",
+ GATE_IP_PERIL, 21, 0, 0, "iis"),
+ GATE_DA(pcm1, "samsung-pcm.1", "pcm1", "aclk100",
+ GATE_IP_PERIL, 22, 0, 0, "pcm"),
+ GATE_DA(pcm2, "samsung-pcm.2", "pcm2", "aclk100",
+ GATE_IP_PERIL, 23, 0, 0, "pcm"),
+ GATE_DA(spdif, "samsung-spdif", "spdif", "aclk100",
+ GATE_IP_PERIL, 26, 0, 0, "spdif"),
+ GATE_DA(ac97, "samsung-ac97", "ac97", "aclk100",
+ GATE_IP_PERIL, 27, 0, 0, "ac97"),
+};
+
+/* list of gate clocks supported in exynos4210 soc */
+struct samsung_gate_clock exynos4210_gate_clks[] __initdata = {
+ GATE(tvenc, "tvenc", "aclk160", GATE_IP_TV, 2, 0, 0),
+ GATE(g2d, "g2d", "aclk200", E4210_GATE_IP_IMAGE, 0, 0, 0),
+ GATE(rotator, "rotator", "aclk200", E4210_GATE_IP_IMAGE, 1, 0, 0),
+ GATE(mdma, "mdma", "aclk200", E4210_GATE_IP_IMAGE, 2, 0, 0),
+ GATE(smmu_g2d, "smmu_g2d", "aclk200", E4210_GATE_IP_IMAGE, 3, 0, 0),
+ GATE(smmu_mdma, "smmu_mdma", "aclk200", E4210_GATE_IP_IMAGE, 5, 0, 0),
+ GATE(pcie_phy, "pcie_phy", "aclk133", GATE_IP_FSYS, 2, 0, 0),
+ GATE(sata_phy, "sata_phy", "aclk133", GATE_IP_FSYS, 3, 0, 0),
+ GATE(sata, "sata", "aclk133", GATE_IP_FSYS, 10, 0, 0),
+ GATE(pcie, "pcie", "aclk133", GATE_IP_FSYS, 14, 0, 0),
+ GATE(smmu_pcie, "smmu_pcie", "aclk133", GATE_IP_FSYS, 18, 0, 0),
+ GATE(modemif, "modemif", "aclk100", GATE_IP_PERIL, 28, 0, 0),
+ GATE(chipid, "chipid", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0),
+ GATE(sysreg, "sysreg", "aclk100", E4210_GATE_IP_PERIR, 0, 0, 0),
+ GATE(hdmi_cec, "hdmi_cec", "aclk100", E4210_GATE_IP_PERIR, 11, 0, 0),
+ GATE(smmu_rotator, "smmu_rotator", "aclk200",
+ E4210_GATE_IP_IMAGE, 4, 0, 0),
+ GATE(sclk_mipi1, "sclk_mipi1", "div_mipi_pre1",
+ E4210_SRC_MASK_LCD1, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_sata, "sclk_sata", "div_sata",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mixer, "sclk_mixer", "mout_mixer", SRC_MASK_TV, 4, 0, 0),
+ GATE(sclk_dac, "sclk_dac", "mout_dac", SRC_MASK_TV, 8, 0, 0),
+ GATE_A(tsadc, "tsadc", "aclk100", GATE_IP_PERIL, 15, 0, 0, "adc"),
+ GATE_A(mct, "mct", "aclk100", E4210_GATE_IP_PERIR, 13, 0, 0, "mct"),
+ GATE_A(wdt, "watchdog", "aclk100", E4210_GATE_IP_PERIR, 14, 0, 0, "watchdog"),
+ GATE_A(rtc, "rtc", "aclk100", E4210_GATE_IP_PERIR, 15, 0, 0, "rtc"),
+ GATE_A(keyif, "keyif", "aclk100", E4210_GATE_IP_PERIR, 16, 0, 0, "keypad"),
+ GATE_DA(sclk_fimd1, "exynos4-fb.1", "sclk_fimd1", "div_fimd1",
+ E4210_SRC_MASK_LCD1, 0, CLK_SET_RATE_PARENT, 0, "sclk_fimd"),
+};
+
+/* list of gate clocks supported in exynos4x12 soc */
+struct samsung_gate_clock exynos4x12_gate_clks[] __initdata = {
+ GATE(audss, "audss", "sclk_epll", E4X12_GATE_IP_MAUDIO, 0, 0, 0),
+ GATE(mdnie0, "mdnie0", "aclk160", GATE_IP_LCD0, 2, 0, 0),
+ GATE(rotator, "rotator", "aclk200", E4X12_GATE_IP_IMAGE, 1, 0, 0),
+ GATE(mdma2, "mdma2", "aclk200", E4X12_GATE_IP_IMAGE, 2, 0, 0),
+ GATE(smmu_mdma, "smmu_mdma", "aclk200", E4X12_GATE_IP_IMAGE, 5, 0, 0),
+ GATE(mipi_hsi, "mipi_hsi", "aclk133", GATE_IP_FSYS, 10, 0, 0),
+ GATE(chipid, "chipid", "aclk100", E4X12_GATE_IP_PERIR, 0, 0, 0),
+ GATE(sysreg, "sysreg", "aclk100", E4X12_GATE_IP_PERIR, 1, 0, 0),
+ GATE(hdmi_cec, "hdmi_cec", "aclk100", E4X12_GATE_IP_PERIR, 11, 0, 0),
+ GATE(sclk_mdnie0, "sclk_mdnie0", "div_mdnie0",
+ SRC_MASK_LCD0, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mdnie_pwm0, "sclk_mdnie_pwm0", "div_mdnie_pwm_pre0",
+ SRC_MASK_LCD0, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_mipihsi, "sclk_mipihsi", "div_mipihsi",
+ SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(smmu_rotator, "smmu_rotator", "aclk200",
+ E4X12_GATE_IP_IMAGE, 4, 0, 0),
+ GATE_A(mct, "mct", "aclk100", E4X12_GATE_IP_PERIR, 13, 0, 0, "mct"),
+ GATE_A(rtc, "rtc", "aclk100", E4X12_GATE_IP_PERIR, 15, 0, 0, "rtc"),
+ GATE_A(keyif, "keyif", "aclk100",
+ E4X12_GATE_IP_PERIR, 16, 0, 0, "keypad"),
+ GATE(sclk_pwm_isp, "sclk_pwm_isp", "div_pwm_isp",
+ E4X12_SRC_MASK_ISP, 0, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi0_isp, "sclk_spi0_isp", "div_spi0_isp_pre",
+ E4X12_SRC_MASK_ISP, 4, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_spi1_isp, "sclk_spi1_isp", "div_spi1_isp_pre",
+ E4X12_SRC_MASK_ISP, 8, CLK_SET_RATE_PARENT, 0),
+ GATE(sclk_uart_isp, "sclk_uart_isp", "div_uart_isp",
+ E4X12_SRC_MASK_ISP, 12, CLK_SET_RATE_PARENT, 0),
+ GATE(pwm_isp_sclk, "pwm_isp_sclk", "sclk_pwm_isp",
+ E4X12_GATE_IP_ISP, 0, 0, 0),
+ GATE(spi0_isp_sclk, "spi0_isp_sclk", "sclk_spi0_isp",
+ E4X12_GATE_IP_ISP, 1, 0, 0),
+ GATE(spi1_isp_sclk, "spi1_isp_sclk", "sclk_spi1_isp",
+ E4X12_GATE_IP_ISP, 2, 0, 0),
+ GATE(uart_isp_sclk, "uart_isp_sclk", "sclk_uart_isp",
+ E4X12_GATE_IP_ISP, 3, 0, 0),
+ GATE_A(wdt, "watchdog", "aclk100",
+ E4X12_GATE_IP_PERIR, 14, 0, 0, "watchdog"),
+ GATE_DA(pcm0, "samsung-pcm.0", "pcm0", "aclk100",
+ E4X12_GATE_IP_MAUDIO, 2, 0, 0, "pcm"),
+ GATE_DA(i2s0, "samsung-i2s.0", "i2s0", "aclk100",
+ E4X12_GATE_IP_MAUDIO, 3, 0, 0, "iis"),
+ GATE(fimc_isp, "isp", "aclk200", E4X12_GATE_ISP0, 0,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_drc, "drc", "aclk200", E4X12_GATE_ISP0, 1,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_fd, "fd", "aclk200", E4X12_GATE_ISP0, 2,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_lite0, "lite0", "aclk200", E4X12_GATE_ISP0, 3,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(fimc_lite1, "lite1", "aclk200", E4X12_GATE_ISP0, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mcuisp, "mcuisp", "aclk200", E4X12_GATE_ISP0, 5,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(gicisp, "gicisp", "aclk200", E4X12_GATE_ISP0, 7,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_isp, "smmu_isp", "aclk200", E4X12_GATE_ISP0, 8,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_drc, "smmu_drc", "aclk200", E4X12_GATE_ISP0, 9,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_fd, "smmu_fd", "aclk200", E4X12_GATE_ISP0, 10,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_lite0, "smmu_lite0", "aclk200", E4X12_GATE_ISP0, 11,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_lite1, "smmu_lite1", "aclk200", E4X12_GATE_ISP0, 12,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(ppmuispmx, "ppmuispmx", "aclk200", E4X12_GATE_ISP0, 20,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(ppmuispx, "ppmuispx", "aclk200", E4X12_GATE_ISP0, 21,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mcuctl_isp, "mcuctl_isp", "aclk200", E4X12_GATE_ISP0, 23,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mpwm_isp, "mpwm_isp", "aclk200", E4X12_GATE_ISP0, 24,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(i2c0_isp, "i2c0_isp", "aclk200", E4X12_GATE_ISP0, 25,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(i2c1_isp, "i2c1_isp", "aclk200", E4X12_GATE_ISP0, 26,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(mtcadc_isp, "mtcadc_isp", "aclk200", E4X12_GATE_ISP0, 27,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(pwm_isp, "pwm_isp", "aclk200", E4X12_GATE_ISP0, 28,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(wdt_isp, "wdt_isp", "aclk200", E4X12_GATE_ISP0, 30,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(uart_isp, "uart_isp", "aclk200", E4X12_GATE_ISP0, 31,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(asyncaxim, "asyncaxim", "aclk200", E4X12_GATE_ISP1, 0,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(smmu_ispcx, "smmu_ispcx", "aclk200", E4X12_GATE_ISP1, 4,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(spi0_isp, "spi0_isp", "aclk200", E4X12_GATE_ISP1, 12,
+ CLK_IGNORE_UNUSED, 0),
+ GATE(spi1_isp, "spi1_isp", "aclk200", E4X12_GATE_ISP1, 13,
+ CLK_IGNORE_UNUSED, 0),
+};
+
+#ifdef CONFIG_OF
+static struct of_device_id exynos4_clk_ids[] __initdata = {
+ { .compatible = "samsung,exynos4210-clock",
+ .data = (void *)EXYNOS4210, },
+ { .compatible = "samsung,exynos4412-clock",
+ .data = (void *)EXYNOS4X12, },
+ { },
+};
+#endif
+
+/*
+ * The parent of the fin_pll clock is selected by the XOM[0] bit. This bit
+ * resides in chipid register space, outside of the clock controller memory
+ * mapped space. So to determine the parent of fin_pll clock, the chipid
+ * controller is first remapped and the value of XOM[0] bit is read to
+ * determine the parent clock.
+ */
+static void __init exynos4_clk_register_finpll(void)
+{
+ struct samsung_fixed_rate_clock fclk;
+ struct device_node *np;
+ struct clk *clk;
+ void __iomem *chipid_base = S5P_VA_CHIPID;
+ unsigned long xom, finpll_f = 24000000;
+ char *parent_name;
+
+ np = of_find_compatible_node(NULL, NULL, "samsung,exynos4210-chipid");
+ if (np)
+ chipid_base = of_iomap(np, 0);
+
+ if (chipid_base) {
+ xom = readl(chipid_base + 8);
+ parent_name = xom & 1 ? "xusbxti" : "xxti";
+ clk = clk_get(NULL, parent_name);
+ if (IS_ERR(clk)) {
+ pr_err("%s: failed to lookup parent clock %s, assuming "
+ "fin_pll clock frequency is 24MHz\n", __func__,
+ parent_name);
+ } else {
+ finpll_f = clk_get_rate(clk);
+ }
+ } else {
+ pr_err("%s: failed to map chipid registers, assuming "
+ "fin_pll clock frequency is 24MHz\n", __func__);
+ }
+
+ fclk.id = fin_pll;
+ fclk.name = "fin_pll";
+ fclk.parent_name = NULL;
+ fclk.flags = CLK_IS_ROOT;
+ fclk.fixed_rate = finpll_f;
+ samsung_clk_register_fixed_rate(&fclk, 1);
+
+ if (np)
+ iounmap(chipid_base);
+}
+
+/*
+ * This function allows non-dt platforms to specify the clock speed of the
+ * xxti and xusbxti clocks. These clocks are then registered with the specified
+ * clock speed.
+ */
+void __init exynos4_clk_register_fixed_ext(unsigned long xxti_f,
+ unsigned long xusbxti_f)
+{
+ exynos4_fixed_rate_ext_clks[0].fixed_rate = xxti_f;
+ exynos4_fixed_rate_ext_clks[1].fixed_rate = xusbxti_f;
+ samsung_clk_register_fixed_rate(exynos4_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos4_fixed_rate_ext_clks));
+}
+
+static __initdata struct of_device_id ext_clk_match[] = {
+ { .compatible = "samsung,clock-xxti", .data = (void *)0, },
+ { .compatible = "samsung,clock-xusbxti", .data = (void *)1, },
+ {},
+};
+
+/* register exynos4 clocks */
+void __init exynos4_clk_init(struct device_node *np)
+{
+ void __iomem *reg_base;
+ struct clk *apll, *mpll, *epll, *vpll;
+ u32 exynos4_soc;
+
+ if (np) {
+ const struct of_device_id *match;
+ match = of_match_node(exynos4_clk_ids, np);
+ exynos4_soc = (u32)match->data;
+
+ reg_base = of_iomap(np, 0);
+ if (!reg_base)
+ panic("%s: failed to map registers\n", __func__);
+ } else {
+ reg_base = S5P_VA_CMU;
+ if (soc_is_exynos4210())
+ exynos4_soc = EXYNOS4210;
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ exynos4_soc = EXYNOS4X12;
+ else
+ panic("%s: unable to determine soc\n", __func__);
+ }
+
+ if (exynos4_soc == EXYNOS4210)
+ samsung_clk_init(np, reg_base, nr_clks,
+ exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
+ exynos4210_clk_save, ARRAY_SIZE(exynos4210_clk_save));
+ else
+ samsung_clk_init(np, reg_base, nr_clks,
+ exynos4_clk_regs, ARRAY_SIZE(exynos4_clk_regs),
+ exynos4x12_clk_save, ARRAY_SIZE(exynos4x12_clk_save));
+
+ if (np)
+ samsung_clk_of_register_fixed_ext(exynos4_fixed_rate_ext_clks,
+ ARRAY_SIZE(exynos4_fixed_rate_ext_clks),
+ ext_clk_match);
+
+ exynos4_clk_register_finpll();
+
+ if (exynos4_soc == EXYNOS4210) {
+ apll = samsung_clk_register_pll45xx("fout_apll", "fin_pll",
+ reg_base + APLL_CON0, pll_4508);
+ mpll = samsung_clk_register_pll45xx("fout_mpll", "fin_pll",
+ reg_base + E4210_MPLL_CON0, pll_4508);
+ epll = samsung_clk_register_pll46xx("fout_epll", "fin_pll",
+ reg_base + EPLL_CON0, pll_4600);
+ vpll = samsung_clk_register_pll46xx("fout_vpll", "mout_vpllsrc",
+ reg_base + VPLL_CON0, pll_4650c);
+ } else {
+ apll = samsung_clk_register_pll35xx("fout_apll", "fin_pll",
+ reg_base + APLL_CON0);
+ mpll = samsung_clk_register_pll35xx("fout_mpll", "fin_pll",
+ reg_base + E4X12_MPLL_CON0);
+ epll = samsung_clk_register_pll36xx("fout_epll", "fin_pll",
+ reg_base + EPLL_CON0);
+ vpll = samsung_clk_register_pll36xx("fout_vpll", "fin_pll",
+ reg_base + VPLL_CON0);
+ }
+
+ samsung_clk_add_lookup(apll, fout_apll);
+ samsung_clk_add_lookup(mpll, fout_mpll);
+ samsung_clk_add_lookup(epll, fout_epll);
+ samsung_clk_add_lookup(vpll, fout_vpll);
+
+ samsung_clk_register_fixed_rate(exynos4_fixed_rate_clks,
+ ARRAY_SIZE(exynos4_fixed_rate_clks));
+ samsung_clk_register_mux(exynos4_mux_clks,
+ ARRAY_SIZE(exynos4_mux_clks));
+ samsung_clk_register_div(exynos4_div_clks,
+ ARRAY_SIZE(exynos4_div_clks));
+ samsung_clk_register_gate(exynos4_gate_clks,
+ ARRAY_SIZE(exynos4_gate_clks));
+
+ if (exynos4_soc == EXYNOS4210) {
+ samsung_clk_register_fixed_rate(exynos4210_fixed_rate_clks,
+ ARRAY_SIZE(exynos4210_fixed_rate_clks));
+ samsung_clk_register_mux(exynos4210_mux_clks,
+ ARRAY_SIZE(exynos4210_mux_clks));
+ samsung_clk_register_div(exynos4210_div_clks,
+ ARRAY_SIZE(exynos4210_div_clks));
+ samsung_clk_register_gate(exynos4210_gate_clks,
+ ARRAY_SIZE(exynos4210_gate_clks));
+ } else {
+ samsung_clk_register_mux(exynos4x12_mux_clks,
+ ARRAY_SIZE(exynos4x12_mux_clks));
+ samsung_clk_register_div(exynos4x12_div_clks,
+ ARRAY_SIZE(exynos4x12_div_clks));
+ samsung_clk_register_gate(exynos4x12_gate_clks,
+ ARRAY_SIZE(exynos4x12_gate_clks));
+ }
+
+ pr_info("%s clocks: sclk_apll = %ld, sclk_mpll = %ld\n"
+ "\tsclk_epll = %ld, sclk_vpll = %ld, arm_clk = %ld\n",
+ exynos4_soc == EXYNOS4210 ? "Exynos4210" : "Exynos4x12",
+ _get_rate("sclk_apll"), _get_rate("sclk_mpll"),
+ _get_rate("sclk_epll"), _get_rate("sclk_vpll"),
+ _get_rate("arm_clk"));
+}
+CLK_OF_DECLARE(exynos4210_clk, "samsung,exynos4210-clock", exynos4_clk_init);
+CLK_OF_DECLARE(exynos4412_clk, "samsung,exynos4412-clock", exynos4_clk_init);
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
new file mode 100644
index 000000000000..bb54606ff035
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -0,0 +1,523 @@
+/*
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2013 Linaro Ltd.
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos5250 SoC.
+*/
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <plat/cpu.h>
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_CPU 0x200
+#define DIV_CPU0 0x500
+#define SRC_CORE1 0x4204
+#define SRC_TOP0 0x10210
+#define SRC_TOP2 0x10218
+#define SRC_GSCL 0x10220
+#define SRC_DISP1_0 0x1022c
+#define SRC_MAU 0x10240
+#define SRC_FSYS 0x10244
+#define SRC_GEN 0x10248
+#define SRC_PERIC0 0x10250
+#define SRC_PERIC1 0x10254
+#define SRC_MASK_GSCL 0x10320
+#define SRC_MASK_DISP1_0 0x1032c
+#define SRC_MASK_MAU 0x10334
+#define SRC_MASK_FSYS 0x10340
+#define SRC_MASK_GEN 0x10344
+#define SRC_MASK_PERIC0 0x10350
+#define SRC_MASK_PERIC1 0x10354
+#define DIV_TOP0 0x10510
+#define DIV_TOP1 0x10514
+#define DIV_GSCL 0x10520
+#define DIV_DISP1_0 0x1052c
+#define DIV_GEN 0x1053c
+#define DIV_MAU 0x10544
+#define DIV_FSYS0 0x10548
+#define DIV_FSYS1 0x1054c
+#define DIV_FSYS2 0x10550
+#define DIV_PERIC0 0x10558
+#define DIV_PERIC1 0x1055c
+#define DIV_PERIC2 0x10560
+#define DIV_PERIC3 0x10564
+#define DIV_PERIC4 0x10568
+#define DIV_PERIC5 0x1056c
+#define GATE_IP_GSCL 0x10920
+#define GATE_IP_MFC 0x1092c
+#define GATE_IP_GEN 0x10934
+#define GATE_IP_FSYS 0x10944
+#define GATE_IP_PERIC 0x10950
+#define GATE_IP_PERIS 0x10960
+#define SRC_CDREX 0x20200
+#define PLL_DIV2_SEL 0x20a24
+#define GATE_IP_DISP1 0x10928
+
+/*
+ * Let each supported clock get a unique id. This id is used to lookup the clock
+ * for device tree based platforms. The clocks are categorized into three
+ * sections: core, scl