aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/ata/sata_highbank.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/ata/sata_highbank.txt')
-rw-r--r--Documentation/devicetree/bindings/ata/sata_highbank.txt44
1 files changed, 44 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt
new file mode 100644
index 000000000000..aa83407cb7a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt
@@ -0,0 +1,44 @@
+* Calxeda AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+The Calxeda SATA controller mostly conforms to the AHCI interface
+with some special extensions to add functionality.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible : compatible list, contains "calxeda,hb-ahci"
+- interrupts : <interrupt mapping for SATA IRQ>
+- reg : <registers mapping>
+
+Optional properties:
+- dma-coherent : Present if dma operations are coherent
+- calxeda,port-phys : phandle-combophy and lane assignment, which maps each
+ SATA port to a combophy and a lane within that
+ combophy
+- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
+ which indicates that the driver supports SGPIO
+ indicator lights using the indicated GPIOs
+- calxeda,led-order : a u32 array that map port numbers to offsets within the
+ SGPIO bitstream.
+- calxeda,tx-atten : a u32 array that contains TX attenuation override
+ codes, one per port. The upper 3 bytes are always
+ 0 and thus ignored.
+- calxeda,pre-clocks : a u32 that indicates the number of additional clock
+ cycles to transmit before sending an SGPIO pattern
+- calxeda,post-clocks: a u32 that indicates the number of additional clock
+ cycles to transmit after sending an SGPIO pattern
+
+Example:
+ sata@ffe08000 {
+ compatible = "calxeda,hb-ahci";
+ reg = <0xffe08000 0x1000>;
+ interrupts = <115>;
+ dma-coherent;
+ calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
+ &combophy0 2 &combophy0 3>;
+ calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+ calxeda,led-order = <4 0 1 2 3>;
+ calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
+ calxeda,pre-clocks = <10>;
+ calxeda,post-clocks = <0>;
+ };

Privacy Policy