aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/sound
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound')
-rw-r--r--Documentation/devicetree/bindings/sound/adi,axi-i2s.txt31
-rw-r--r--Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt30
-rw-r--r--Documentation/devicetree/bindings/sound/bcm2835-i2s.txt25
-rw-r--r--Documentation/devicetree/bindings/sound/cs42l52.txt46
-rw-r--r--Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt6
-rw-r--r--Documentation/devicetree/bindings/sound/fsl,esai.txt50
-rw-r--r--Documentation/devicetree/bindings/sound/fsl,ssi.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/fsl-sai.txt40
-rw-r--r--Documentation/devicetree/bindings/sound/hdmi.txt17
-rw-r--r--Documentation/devicetree/bindings/sound/max98090.txt43
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt51
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt20
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt19
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt63
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt11
-rw-r--r--Documentation/devicetree/bindings/sound/simple-card.txt77
-rw-r--r--Documentation/devicetree/bindings/sound/tlv320aic3x.txt1
22 files changed, 534 insertions, 38 deletions
diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
new file mode 100644
index 000000000000..5875ca459ed1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
@@ -0,0 +1,31 @@
+ADI AXI-I2S controller
+
+Required properties:
+ - compatible : Must be "adi,axi-i2s-1.00.a"
+ - reg : Must contain I2S core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+ The controller expects two clocks, the clock used for the AXI interface and
+ the clock used as the sampling rate reference clock sample.
+ - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample
+ rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channels that are used by
+ the core. The core expects two dma channels, one for transmit and one for
+ receive.
+ - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+ * resource-names.txt
+ * clock/clock-bindings.txt
+ * dma/dma.txt
+
+Example:
+
+ i2s: i2s@0x77600000 {
+ compatible = "adi,axi-i2s-1.00.a";
+ reg = <0x77600000 0x1000>;
+ clocks = <&clk 15>, <&audio_clock>;
+ clock-names = "axi", "ref";
+ dmas = <&ps7_dma 0>, <&ps7_dma 1>;
+ dma-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
new file mode 100644
index 000000000000..46f344965313
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt
@@ -0,0 +1,30 @@
+ADI AXI-SPDIF controller
+
+Required properties:
+ - compatible : Must be "adi,axi-spdif-1.00.a"
+ - reg : Must contain SPDIF core's registers location and length
+ - clocks : Pairs of phandle and specifier referencing the controller's clocks.
+ The controller expects two clocks, the clock used for the AXI interface and
+ the clock used as the sampling rate reference clock sample.
+ - clock-names: "axi" for the clock to the AXI interface, "ref" for the sample
+ rate reference clock.
+ - dmas: Pairs of phandle and specifier for the DMA channel that is used by
+ the core. The core expects one dma channel for transmit.
+ - dma-names : Must be "tx"
+
+For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
+please check:
+ * resource-names.txt
+ * clock/clock-bindings.txt
+ * dma/dma.txt
+
+Example:
+
+ spdif: spdif@0x77400000 {
+ compatible = "adi,axi-spdif-tx-1.00.a";
+ reg = <0x77600000 0x1000>;
+ clocks = <&clk 15>, <&audio_clock>;
+ clock-names = "axi", "ref";
+ dmas = <&ps7_dma 0>;
+ dma-names = "tx";
+ };
diff --git a/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt b/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt
new file mode 100644
index 000000000000..65783de0aedf
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt
@@ -0,0 +1,25 @@
+* Broadcom BCM2835 SoC I2S/PCM module
+
+Required properties:
+- compatible: "brcm,bcm2835-i2s"
+- reg: A list of base address and size entries:
+ * The first entry should cover the PCM registers
+ * The second entry should cover the PCM clock registers
+- dmas: List of DMA controller phandle and DMA request line ordered pairs.
+- dma-names: Identifier string for each DMA request line in the dmas property.
+ These strings correspond 1:1 with the ordered pairs in dmas.
+
+ One of the DMA channels will be responsible for transmission (should be
+ named "tx") and one for reception (should be named "rx").
+
+Example:
+
+bcm2835_i2s: i2s@7e203000 {
+ compatible = "brcm,bcm2835-i2s";
+ reg = <0x7e203000 0x20>,
+ <0x7e101098 0x02>;
+
+ dmas = <&dma 2>,
+ <&dma 3>;
+ dma-names = "tx", "rx";
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42l52.txt b/Documentation/devicetree/bindings/sound/cs42l52.txt
new file mode 100644
index 000000000000..bc03c9312a19
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs42l52.txt
@@ -0,0 +1,46 @@
+CS42L52 audio CODEC
+
+Required properties:
+
+ - compatible : "cirrus,cs42l52"
+
+ - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+ - cirrus,reset-gpio : GPIO controller's phandle and the number
+ of the GPIO used to reset the codec.
+
+ - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency.
+ Allowable values of 0x00 through 0x0F. These are raw values written to the
+ register, not the actual frequency. The frequency is determined by the following.
+ Frequency = (64xFs)/(N+2)
+ N = chgfreq_val
+ Fs = Sample Rate (variable)
+
+ - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured
+ as a differential input. If not present then the MICA input is configured as
+ Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+ - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured
+ as a differential input. If not present then the MICB input is configured as
+ Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input.
+
+ - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin
+ 0 = 0.5 x VA
+ 1 = 0.6 x VA
+ 2 = 0.7 x VA
+ 3 = 0.8 x VA
+ 4 = 0.83 x VA
+ 5 = 0.91 x VA
+
+Example:
+
+codec: codec@4a {
+ compatible = "cirrus,cs42l52";
+ reg = <0x4a>;
+ reset-gpio = <&gpio 10 0>;
+ cirrus,chgfreq-divisor = <0x05>;
+ cirrus.mica-differential-cfg;
+ cirrus,micbias-lvl = <5>;
+};
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
index ed785b3f67be..569b26c4a81e 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -4,7 +4,8 @@ Required properties:
- compatible :
"ti,dm646x-mcasp-audio" : for DM646x platforms
"ti,da830-mcasp-audio" : for both DA830 & DA850 platforms
- "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, TI81xx)
+ "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx)
+ "ti,dra7-mcasp-audio" : for DRA7xx platforms
- reg : Should contain reg specifiers for the entries in the reg-names property.
- reg-names : Should contain:
@@ -36,7 +37,8 @@ Optional properties:
- pinctrl-0: Should specify pin control group used for this controller.
- pinctrl-names: Should contain only one value - "default", for more details
please refer to pinctrl-bindings.txt
-
+- fck_parent : Should contain a valid clock name which will be used as parent
+ for the McASP fck
Example:
diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
new file mode 100644
index 000000000000..d7b99fa637b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -0,0 +1,50 @@
+Freescale Enhanced Serial Audio Interface (ESAI) Controller
+
+The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port
+for serial communication with a variety of serial devices, including industry
+standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and
+other DSPs. It has up to six transmitters and four receivers.
+
+Required properties:
+
+ - compatible : Compatible list, must contain "fsl,imx35-esai".
+
+ - reg : Offset and length of the register set for the device.
+
+ - interrupts : Contains the spdif interrupt.
+
+ - dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+
+ - dma-names : Two dmas have to be defined, "tx" and "rx".
+
+ - clocks: Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "core" The core clock used to access registers
+ "extal" The esai baud clock for esai controller used to derive
+ HCK, SCK and FS.
+ "fsys" The system clock derived from ahb clock used to derive
+ HCK, SCK and FS.
+
+ - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs.
+ This number is the maximum allowed value for TFCR[TFWM] or RFCR[RFWM].
+
+ - fsl,esai-synchronous: This is a boolean property. If present, indicating
+ that ESAI would work in the synchronous mode, which means all the settings
+ for Receiving would be duplicated from Transmition related registers.
+
+Example:
+
+esai: esai@02024000 {
+ compatible = "fsl,imx35-esai";
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 51 0x04>;
+ clocks = <&clks 208>, <&clks 118>, <&clks 208>;
+ clock-names = "core", "extal", "fsys";
+ dmas = <&sdma 23 21 0>, <&sdma 24 21 0>;
+ dma-names = "rx", "tx";
+ fsl,fifo-depth = <128>;
+ fsl,esai-synchronous;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
index 4303b6ab6208..b93e9a91e30e 100644
--- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt
@@ -4,7 +4,12 @@ The SSI is a serial device that communicates with audio codecs. It can
be programmed in AC97, I2S, left-justified, or right-justified modes.
Required properties:
-- compatible: Compatible list, contains "fsl,ssi".
+- compatible: Compatible list, should contain one of the following
+ compatibles:
+ fsl,mpc8610-ssi
+ fsl,imx51-ssi
+ fsl,imx35-ssi
+ fsl,imx21-ssi
- cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on.
- reg: Offset and length of the register set for the device.
- interrupts: <a b> where a is the interrupt number and b is a
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
new file mode 100644
index 000000000000..98611a6761c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
@@ -0,0 +1,40 @@
+Freescale Synchronous Audio Interface (SAI).
+
+The SAI is based on I2S module that used communicating with audio codecs,
+which provides a synchronous audio interface that supports fullduplex
+serial interfaces with frame synchronization such as I2S, AC97, TDM, and
+codec/DSP interfaces.
+
+
+Required properties:
+- compatible: Compatible list, contains "fsl,vf610-sai".
+- reg: Offset and length of the register set for the device.
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names : Must include the "sai" entry.
+- dmas : Generic dma devicetree binding as described in
+ Documentation/devicetree/bindings/dma/dma.txt.
+- dma-names : Two dmas have to be defined, "tx" and "rx".
+- pinctrl-names: Must contain a "default" entry.
+- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
+ See ../pinctrl/pinctrl-bindings.txt for details of the property values.
+- big-endian-regs: If this property is absent, the little endian mode will
+ be in use as default, or the big endian mode will be in use for all the
+ device registers.
+- big-endian-data: If this property is absent, the little endian mode will
+ be in use as default, or the big endian mode will be in use for all the
+ fifo data.
+
+Example:
+sai2: sai@40031000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40031000 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2_1>;
+ clocks = <&clks VF610_CLK_SAI2>;
+ clock-names = "sai";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
+ <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
+ big-endian-regs;
+ big-endian-data;
+};
diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt
new file mode 100644
index 000000000000..31af7bca3099
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/hdmi.txt
@@ -0,0 +1,17 @@
+Device-Tree bindings for dummy HDMI codec
+
+Required properties:
+ - compatible: should be "linux,hdmi-audio".
+
+CODEC output pins:
+ * TX
+
+CODEC input pins:
+ * RX
+
+Example node:
+
+ hdmi_audio: hdmi_audio@0 {
+ compatible = "linux,hdmi-audio";
+ status = "okay";
+ };
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
new file mode 100644
index 000000000000..e4c8b36dcf89
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -0,0 +1,43 @@
+MAX98090 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "maxim,max98090".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Pins on the device (for linking into audio routes):
+
+ * MIC1
+ * MIC2
+ * DMICL
+ * DMICR
+ * IN1
+ * IN2
+ * IN3
+ * IN4
+ * IN5
+ * IN6
+ * IN12
+ * IN34
+ * IN56
+ * HPL
+ * HPR
+ * SPKL
+ * SPKR
+ * RCVL
+ * RCVR
+ * MICBIAS
+
+Example:
+
+audio-codec@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
index 8b8903ef0800..57f40f93453e 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-alc5632"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt
new file mode 100644
index 000000000000..9c7c55c71370
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt
@@ -0,0 +1,51 @@
+NVIDIA Tegra audio complex, with MAX98090 CODEC
+
+Required properties:
+- compatible : "nvidia,tegra-audio-max98090"
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the connection's sink,
+ the second being the connection's source. Valid names for sources and
+ sinks are the MAX98090's pins (as documented in its binding), and the jacks
+ on the board:
+
+ * Headphones
+ * Speakers
+ * Mic Jack
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's
+ connected to the CODEC.
+- nvidia,audio-codec : The phandle of the MAX98090 audio codec.
+
+Optional properties:
+- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in
+
+Example:
+
+sound {
+ compatible = "nvidia,tegra-audio-max98090-venice2",
+ "nvidia,tegra-audio-max98090";
+ nvidia,model = "NVIDIA Tegra Venice2";
+
+ nvidia,audio-routing =
+ "Headphones", "HPR",
+ "Headphones", "HPL",
+ "Speakers", "SPKR",
+ "Speakers", "SPKL",
+ "Mic Jack", "MICBIAS",
+ "IN34", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&acodec>;
+
+ clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
+ <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA124_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
index dc6224994d69..7788808dcd0b 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-rt5640.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex, with RT5640 CODEC
Required properties:
- compatible : "nvidia,tegra-audio-rt5640"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
index aab6ce0ad2fc..96f6a57dd6b4 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm8753"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index 4b44dfb6ca0d..b795d282818d 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm8903"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
index ad589b163639..436f6cd9d07c 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
@@ -3,10 +3,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm9712"
- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- "pll_a" (The Tegra clock of that name),
- "pll_a_out0" (The Tegra clock of that name),
- "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
+ - pll_a
+ - pll_a_out0
+ - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
index c1454979c1ef..eaf00102d92c 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
@@ -4,19 +4,33 @@ Required properties:
- compatible : "nvidia,tegra20-ac97"
- reg : Should contain AC97 controller registers location and length
- interrupts : Should contain AC97 interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for the AC97 controller
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - ac97
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
- nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
of the GPIO used to reset the external AC97 codec
- nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
of the GPIO corresponding with the AC97 DAP _FS line
+
Example:
ac97@70002000 {
compatible = "nvidia,tegra20-ac97";
reg = <0x70002000 0x200>;
interrupts = <0 81 0x04>;
- nvidia,dma-request-selector = <&apbdma 12>;
nvidia,codec-reset-gpio = <&gpio 170 0>;
nvidia,codec-sync-gpio = <&gpio 120 0>;
+ clocks = <&tegra_car 3>;
+ resets = <&tegra_car 3>;
+ reset-names = "ac97";
+ dmas = <&apbdma 12>, <&apbdma 12>;
+ dma-names = "rx", "tx";
};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
index 0df2b5c816e3..dc30c6bfbe95 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
@@ -4,8 +4,17 @@ Required properties:
- compatible : "nvidia,tegra20-i2s"
- reg : Should contain I2S registers location and length
- interrupts : Should contain I2S interrupt
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for this I2S controller
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - i2s
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
Example:
@@ -13,5 +22,9 @@ i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 45 >;
- nvidia,dma-request-selector = < &apbdma 2 >;
+ clocks = <&tegra_car 11>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
+ dmas = <&apbdma 21>, <&apbdma 21>;
+ dma-names = "rx", "tx";
};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
index 0e5c12c66523..946e2ac46091 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -7,18 +7,48 @@ Required properties:
- Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
- Tegra114 requires an additional entry, for the APBIF2 register block.
- interrupts : Should contain AHUB interrupt
-- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
- entry contains the Tegra DMA controller's phandle and request selector.
- If a single entry is present, the request selectors for the channels are
- assumed to be contiguous, and increment from this value.
- If multiple values are given, one value must be given per channel.
-- clocks : Must contain an entry for each required entry in clock-names.
+- clocks : Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entries:
- - Tegra30: Requires d_audio, apbif, i2s0, i2s1, i2s2, i2s3, i2s4, dam0,
- dam1, dam2, spdif_in.
- - Tegra114: Additionally requires amx, adx.
+ - d_audio
+ - apbif
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ Tegra30 and later:
+ - d_audio
+ - apbif
+ - i2s0
+ - i2s1
+ - i2s2
+ - i2s3
+ - i2s4
+ - dam0
+ - dam1
+ - dam2
+ - spdif
+ Tegra114 and later additionally require:
+ - amx
+ - adx
+ Tegra124 and later additionally require:
+ - amx1
+ - adx1
+ - afc0
+ - afc1
+ - afc2
+ - afc3
+ - afc4
+ - afc5
- ranges : The bus address mapping for the configlink register bus.
Can be empty since the mapping is 1:1.
+- dmas : Must contain an entry for each entry in clock-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx0 .. rx<n>
+ - tx0 .. tx<n>
+ ... where n is:
+ Tegra30: 3
+ Tegra114, Tegra124: 9
- #address-cells : For the configlink bus. Should be <1>;
- #size-cells : For the configlink bus. Should be <1>.
@@ -35,13 +65,20 @@ ahub@70080000 {
reg = <0x70080000 0x200 0x70080200 0x100>;
interrupts = < 0 103 0x04 >;
nvidia,dma-request-selector = <&apbdma 1>;
- clocks = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
+ clocks = <&tegra_car 106>, <&tegra_car 107>;
+ clock-names = "d_audio", "apbif";
+ resets = <&tegra_car 106>, <&tegra_car 107>, <&tegra_car 30>,
<&tegra_car 11>, <&tegra_car 18>, <&tegra_car 101>,
<&tegra_car 102>, <&tegra_car 108>, <&tegra_car 109>,
- <&tegra_car 110>, <&tegra_car 162>;
- clock-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
+ <&tegra_car 110>, <&tegra_car 10>;
+ reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
"i2s3", "i2s4", "dam0", "dam1", "dam2",
- "spdif_in";
+ "spdif";
+ dmas = <&apbdma 1>, <&apbdma 1>;
+ <&apbdma 2>, <&apbdma 2>;
+ <&apbdma 3>, <&apbdma 3>;
+ <&apbdma 4>, <&apbdma 4>;
+ dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3";
ranges;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
index dfa6c037124a..0c113ffe3814 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt
@@ -3,13 +3,22 @@ NVIDIA Tegra30 I2S controller
Required properties:
- compatible : "nvidia,tegra30-i2s"
- reg : Should contain I2S registers location and length
+- clocks : Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - i2s
- nvidia,ahub-cif-ids : The list of AHUB CIF IDs for this port, rx (playback)
first, tx (capture) second. See nvidia,tegra30-ahub.txt for values.
Example:
-i2s@70002800 {
+i2s@70080300 {
compatible = "nvidia,tegra30-i2s";
reg = <0x70080300 0x100>;
nvidia,ahub-cif-ids = <4 4>;
+ clocks = <&tegra_car 11>;
+ resets = <&tegra_car 11>;
+ reset-names = "i2s";
};
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
new file mode 100644
index 000000000000..19c84df5fffa
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -0,0 +1,77 @@
+Simple-Card:
+
+Simple-Card specifies audio DAI connection of SoC <-> codec.
+
+Required properties:
+
+- compatible : "simple-audio-card"
+
+Optional properties:
+
+- simple-audio-card,format : CPU/CODEC common audio format.
+ "i2s", "right_j", "left_j" , "dsp_a"
+ "dsp_b", "ac97", "pdm", "msb", "lsb"
+- simple-audio-card,routing : A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the
+ connection's sink, the second being the connection's
+ source.
+
+Required subnodes:
+
+- simple-audio-card,cpu : CPU sub-node
+- simple-audio-card,codec : CODEC sub-node
+
+Required CPU/CODEC subnodes properties:
+
+- sound-dai : phandle and port of CPU/CODEC
+
+Optional CPU/CODEC subnodes properties:
+
+- format : CPU/CODEC specific audio format if needed.
+ see simple-audio-card,format
+- frame-master : bool property. add this if subnode is frame master
+- bitclock-master : bool property. add this if subnode is bitclock master
+- bitclock-inversion : bool property. add this if subnode has clock inversion
+- frame-inversion : bool property. add this if subnode has frame inversion
+- clocks / system-clock-frequency : specify subnode's clock if needed.
+ it can be specified via "clocks" if system has
+ clock node (= common clock), or "system-clock-frequency"
+ (if system doens't support common clock)
+
+Example:
+
+sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "left_j";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Headphone Jack", "HP_OUT",
+ "Ext Spk", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sh_fsi2 0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&ak4648>;
+ bitclock-master;
+ frame-master;
+ clocks = <&osc>;
+ };
+};
+
+&i2c0 {
+ ak4648: ak4648@12 {
+ #sound-dai-cells = <0>;
+ compatible = "asahi-kasei,ak4648";
+ reg = <0x12>;
+ };
+};
+
+sh_fsi2: sh_fsi2@ec230000 {
+ #sound-dai-cells = <1>;
+ compatible = "renesas,sh_fsi2";
+ reg = <0xec230000 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 146 0x4>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
index 5e6040c2c2e9..9d8ea14db490 100644
--- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -6,6 +6,7 @@ Required properties:
- compatible - "string" - One of:
"ti,tlv320aic3x" - Generic TLV320AIC3x device
+ "ti,tlv320aic32x4" - TLV320AIC32x4
"ti,tlv320aic33" - TLV320AIC33
"ti,tlv320aic3007" - TLV320AIC3007
"ti,tlv320aic3106" - TLV320AIC3106

Privacy Policy