aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r--Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt11
-rw-r--r--Documentation/devicetree/bindings/media/samsung-s5k5baf.txt58
2 files changed, 69 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
new file mode 100644
index 000000000000..937b755baf8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt
@@ -0,0 +1,11 @@
+Samsung S5P/EXYNOS SoC series JPEG codec
+
+Required properties:
+
+- compatible : should be one of:
+ "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg";
+- reg : address and length of the JPEG codec IP register set;
+- interrupts : specifies the JPEG codec IP interrupt;
+- clocks : should contain the JPEG codec IP gate clock specifier, from the
+ common clock bindings;
+- clock-names : should contain "jpeg" entry.
diff --git a/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
new file mode 100644
index 000000000000..1f51e0439c96
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/samsung-s5k5baf.txt
@@ -0,0 +1,58 @@
+Samsung S5K5BAF UXGA 1/5" 2M CMOS Image Sensor with embedded SoC ISP
+--------------------------------------------------------------------
+
+Required properties:
+
+- compatible : "samsung,s5k5baf";
+- reg : I2C slave address of the sensor;
+- vdda-supply : analog power supply 2.8V (2.6V to 3.0V);
+- vddreg-supply : regulator input power supply 1.8V (1.7V to 1.9V)
+ or 2.8V (2.6V to 3.0);
+- vddio-supply : I/O power supply 1.8V (1.65V to 1.95V)
+ or 2.8V (2.5V to 3.1V);
+- stbyn-gpios : GPIO connected to STDBYN pin;
+- rstn-gpios : GPIO connected to RSTN pin;
+- clocks : list of phandle and clock specifier pairs
+ according to common clock bindings for the
+ clocks described in clock-names;
+- clock-names : should include "mclk" for the sensor's master clock;
+
+Optional properties:
+
+- clock-frequency : the frequency at which the "mclk" clock should be
+ configured to operate, in Hz; if this property is not
+ specified default 24 MHz value will be used.
+
+The device node should contain one 'port' child node with one child 'endpoint'
+node, according to the bindings defined in Documentation/devicetree/bindings/
+media/video-interfaces.txt. The following are properties specific to those
+nodes.
+
+endpoint node
+-------------
+
+- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in
+ video-interfaces.txt. If present it should be <1> - the device
+ supports only one data lane without re-mapping.
+
+Example:
+
+s5k5bafx@2d {
+ compatible = "samsung,s5k5baf";
+ reg = <0x2d>;
+ vdda-supply = <&cam_io_en_reg>;
+ vddreg-supply = <&vt_core_15v_reg>;
+ vddio-supply = <&vtcam_reg>;
+ stbyn-gpios = <&gpl2 0 1>;
+ rstn-gpios = <&gpl2 1 1>;
+ clock-names = "mclk";
+ clocks = <&clock_cam 0>;
+ clock-frequency = <24000000>;
+
+ port {
+ s5k5bafx_ep: endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+};

Privacy Policy