aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/pci/tw68/tw68-core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/pci/tw68/tw68-core.c')
-rw-r--r--drivers/media/pci/tw68/tw68-core.c434
1 files changed, 434 insertions, 0 deletions
diff --git a/drivers/media/pci/tw68/tw68-core.c b/drivers/media/pci/tw68/tw68-core.c
new file mode 100644
index 0000000..a6fb48c
--- /dev/null
+++ b/drivers/media/pci/tw68/tw68-core.c
@@ -0,0 +1,434 @@
+/*
+ * tw68-core.c
+ * Core functions for the Techwell 68xx driver
+ *
+ * Much of this code is derived from the cx88 and sa7134 drivers, which
+ * were in turn derived from the bt87x driver. The original work was by
+ * Gerd Knorr; more recently the code was enhanced by Mauro Carvalho Chehab,
+ * Hans Verkuil, Andy Walls and many others. Their work is gratefully
+ * acknowledged. Full credit goes to them - any problems within this code
+ * are mine.
+ *
+ * Copyright (C) 2009 William M. Brack
+ *
+ * Refactored and updated to the latest v4l core frameworks:
+ *
+ * Copyright (C) 2014 Hans Verkuil <hverkuil@xs4all.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/kmod.h>
+#include <linux/sound.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/dma-mapping.h>
+#include <linux/pm.h>
+
+#include <media/v4l2-dev.h>
+#include "tw68.h"
+#include "tw68-reg.h"
+
+MODULE_DESCRIPTION("v4l2 driver module for tw6800 based video capture cards");
+MODULE_AUTHOR("William M. Brack");
+MODULE_AUTHOR("Hans Verkuil <hverkuil@xs4all.nl>");
+MODULE_LICENSE("GPL");
+
+static unsigned int latency = UNSET;
+module_param(latency, int, 0444);
+MODULE_PARM_DESC(latency, "pci latency timer");
+
+static unsigned int video_nr[] = {[0 ... (TW68_MAXBOARDS - 1)] = UNSET };
+module_param_array(video_nr, int, NULL, 0444);
+MODULE_PARM_DESC(video_nr, "video device number");
+
+static unsigned int card[] = {[0 ... (TW68_MAXBOARDS - 1)] = UNSET };
+module_param_array(card, int, NULL, 0444);
+MODULE_PARM_DESC(card, "card type");
+
+static atomic_t tw68_instance = ATOMIC_INIT(0);
+
+/* ------------------------------------------------------------------ */
+
+/*
+ * Please add any new PCI IDs to: http://pci-ids.ucw.cz. This keeps
+ * the PCI ID database up to date. Note that the entries must be
+ * added under vendor 0x1797 (Techwell Inc.) as subsystem IDs.
+ */
+static const struct pci_device_id tw68_pci_tbl[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6800)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6801)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6804)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6816_1)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6816_2)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6816_3)},
+ {PCI_DEVICE(PCI_VENDOR_ID_TECHWELL, PCI_DEVICE_ID_6816_4)},
+ {0,}
+};
+
+/* ------------------------------------------------------------------ */
+
+
+/*
+ * The device is given a "soft reset". According to the specifications,
+ * after this "all register content remain unchanged", so we also write
+ * to all specified registers manually as well (mostly to manufacturer's
+ * specified reset values)
+ */
+static int tw68_hw_init1(struct tw68_dev *dev)
+{
+ /* Assure all interrupts are disabled */
+ tw_writel(TW68_INTMASK, 0); /* 020 */
+ /* Clear any pending interrupts */
+ tw_writel(TW68_INTSTAT, 0xffffffff); /* 01C */
+ /* Stop risc processor, set default buffer level */
+ tw_writel(TW68_DMAC, 0x1600);
+
+ tw_writeb(TW68_ACNTL, 0x80); /* 218 soft reset */
+ msleep(100);
+
+ tw_writeb(TW68_INFORM, 0x40); /* 208 mux0, 27mhz xtal */
+ tw_writeb(TW68_OPFORM, 0x04); /* 20C analog line-lock */
+ tw_writeb(TW68_HSYNC, 0); /* 210 color-killer high sens */
+ tw_writeb(TW68_ACNTL, 0x42); /* 218 int vref #2, chroma adc off */
+
+ tw_writeb(TW68_CROP_HI, 0x02); /* 21C Hactive m.s. bits */
+ tw_writeb(TW68_VDELAY_LO, 0x12);/* 220 Mfg specified reset value */
+ tw_writeb(TW68_VACTIVE_LO, 0xf0);
+ tw_writeb(TW68_HDELAY_LO, 0x0f);
+ tw_writeb(TW68_HACTIVE_LO, 0xd0);
+
+ tw_writeb(TW68_CNTRL1, 0xcd); /* 230 Wide Chroma BPF B/W
+ * Secam reduction, Adap comb for
+ * NTSC, Op Mode 1 */
+
+ tw_writeb(TW68_VSCALE_LO, 0); /* 234 */
+ tw_writeb(TW68_SCALE_HI, 0x11); /* 238 */
+ tw_writeb(TW68_HSCALE_LO, 0); /* 23c */
+ tw_writeb(TW68_BRIGHT, 0); /* 240 */
+ tw_writeb(TW68_CONTRAST, 0x5c); /* 244 */
+ tw_writeb(TW68_SHARPNESS, 0x51);/* 248 */
+ tw_writeb(TW68_SAT_U, 0x80); /* 24C */
+ tw_writeb(TW68_SAT_V, 0x80); /* 250 */
+ tw_writeb(TW68_HUE, 0x00); /* 254 */
+
+ /* TODO - Check that none of these are set by control defaults */
+ tw_writeb(TW68_SHARP2, 0x53); /* 258 Mfg specified reset val */
+ tw_writeb(TW68_VSHARP, 0x80); /* 25C Sharpness Coring val 8 */
+ tw_writeb(TW68_CORING, 0x44); /* 260 CTI and Vert Peak coring */
+ tw_writeb(TW68_CNTRL2, 0x00); /* 268 No power saving enabled */
+ tw_writeb(TW68_SDT, 0x07); /* 270 Enable shadow reg, auto-det */
+ tw_writeb(TW68_SDTR, 0x7f); /* 274 All stds recog, don't start */
+ tw_writeb(TW68_CLMPG, 0x50); /* 280 Clamp end at 40 sys clocks */
+ tw_writeb(TW68_IAGC, 0x22); /* 284 Mfg specified reset val */
+ tw_writeb(TW68_AGCGAIN, 0xf0); /* 288 AGC gain when loop disabled */
+ tw_writeb(TW68_PEAKWT, 0xd8); /* 28C White peak threshold */
+ tw_writeb(TW68_CLMPL, 0x3c); /* 290 Y channel clamp level */
+/* tw_writeb(TW68_SYNCT, 0x38);*/ /* 294 Sync amplitude */
+ tw_writeb(TW68_SYNCT, 0x30); /* 294 Sync amplitude */
+ tw_writeb(TW68_MISSCNT, 0x44); /* 298 Horiz sync, VCR detect sens */
+ tw_writeb(TW68_PCLAMP, 0x28); /* 29C Clamp pos from PLL sync */
+ /* Bit DETV of VCNTL1 helps sync multi cams/chip board */
+ tw_writeb(TW68_VCNTL1, 0x04); /* 2A0 */
+ tw_writeb(TW68_VCNTL2, 0); /* 2A4 */
+ tw_writeb(TW68_CKILL, 0x68); /* 2A8 Mfg specified reset val */
+ tw_writeb(TW68_COMB, 0x44); /* 2AC Mfg specified reset val */
+ tw_writeb(TW68_LDLY, 0x30); /* 2B0 Max positive luma delay */
+ tw_writeb(TW68_MISC1, 0x14); /* 2B4 Mfg specified reset val */
+ tw_writeb(TW68_LOOP, 0xa5); /* 2B8 Mfg specified reset val */
+ tw_writeb(TW68_MISC2, 0xe0); /* 2BC Enable colour killer */
+ tw_writeb(TW68_MVSN, 0); /* 2C0 */
+ tw_writeb(TW68_CLMD, 0x05); /* 2CC slice level auto, clamp med. */
+ tw_writeb(TW68_IDCNTL, 0); /* 2D0 Writing zero to this register
+ * selects NTSC ID detection,
+ * but doesn't change the
+ * sensitivity (which has a reset
+ * value of 1E). Since we are
+ * not doing auto-detection, it
+ * has no real effect */
+ tw_writeb(TW68_CLCNTL1, 0); /* 2D4 */
+ tw_writel(TW68_VBIC, 0x03); /* 010 */
+ tw_writel(TW68_CAP_CTL, 0x03); /* 040 Enable both even & odd flds */
+ tw_writel(TW68_DMAC, 0x2000); /* patch set had 0x2080 */
+ tw_writel(TW68_TESTREG, 0); /* 02C */
+
+ /*
+ * Some common boards, especially inexpensive single-chip models,
+ * use the GPIO bits 0-3 to control an on-board video-output mux.
+ * For these boards, we need to set up the GPIO register into
+ * "normal" mode, set bits 0-3 as output, and then set those bits
+ * zero.
+ *
+ * Eventually, it would be nice if we could identify these boards
+ * uniquely, and only do this initialisation if the board has been
+ * identify. For the moment, however, it shouldn't hurt anything
+ * to do these steps.
+ */
+ tw_writel(TW68_GPIOC, 0); /* Set the GPIO to "normal", no ints */
+ tw_writel(TW68_GPOE, 0x0f); /* Set bits 0-3 to "output" */
+ tw_writel(TW68_GPDATA, 0); /* Set all bits to low state */
+
+ /* Initialize the device control structures */
+ mutex_init(&dev->lock);
+ spin_lock_init(&dev->slock);
+
+ /* Initialize any subsystems */
+ tw68_video_init1(dev);
+ return 0;
+}
+
+static irqreturn_t tw68_irq(int irq, void *dev_id)
+{
+ struct tw68_dev *dev = dev_id;
+ u32 status, orig;
+ int loop;
+
+ status = orig = tw_readl(TW68_INTSTAT) & dev->pci_irqmask;
+ /* Check if anything to do */
+ if (0 == status)
+ return IRQ_NONE; /* Nope - return */
+ for (loop = 0; loop < 10; loop++) {
+ if (status & dev->board_virqmask) /* video interrupt */
+ tw68_irq_video_done(dev, status);
+ status = tw_readl(TW68_INTSTAT) & dev->pci_irqmask;
+ if (0 == status)
+ return IRQ_HANDLED;
+ }
+ dev_dbg(&dev->pci->dev, "%s: **** INTERRUPT NOT HANDLED - clearing mask (orig 0x%08x, cur 0x%08x)",
+ dev->name, orig, tw_readl(TW68_INTSTAT));
+ dev_dbg(&dev->pci->dev, "%s: pci_irqmask 0x%08x; board_virqmask 0x%08x ****\n",
+ dev->name, dev->pci_irqmask, dev->board_virqmask);
+ tw_clearl(TW68_INTMASK, dev->pci_irqmask);
+ return IRQ_HANDLED;
+}
+
+static int tw68_initdev(struct pci_dev *pci_dev,
+ const struct pci_device_id *pci_id)
+{
+ struct tw68_dev *dev;
+ int vidnr = -1;
+ int err;
+
+ dev = devm_kzalloc(&pci_dev->dev, sizeof(*dev), GFP_KERNEL);
+ if (NULL == dev)
+ return -ENOMEM;
+
+ dev->instance = v4l2_device_set_name(&dev->v4l2_dev, "tw68",
+ &tw68_instance);
+
+ err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev);
+ if (err)
+ return err;
+
+ /* pci init */
+ dev->pci = pci_dev;
+ if (pci_enable_device(pci_dev)) {
+ err = -EIO;
+ goto fail1;
+ }
+
+ dev->name = dev->v4l2_dev.name;
+
+ if (UNSET != latency) {
+ pr_info("%s: setting pci latency timer to %d\n",
+ dev->name, latency);
+ pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, latency);
+ }
+
+ /* print pci info */
+ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &dev->pci_rev);
+ pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
+ pr_info("%s: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+ dev->name, pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+ dev->pci_lat, (u64)pci_resource_start(pci_dev, 0));
+ pci_set_master(pci_dev);
+ if (!pci_dma_supported(pci_dev, DMA_BIT_MASK(32))) {
+ pr_info("%s: Oops: no 32bit PCI DMA ???\n", dev->name);
+ err = -EIO;
+ goto fail1;
+ }
+
+ switch (pci_id->device) {
+ case PCI_DEVICE_ID_6800: /* TW6800 */
+ dev->vdecoder = TW6800;
+ dev->board_virqmask = TW68_VID_INTS;
+ break;
+ case PCI_DEVICE_ID_6801: /* Video decoder for TW6802 */
+ dev->vdecoder = TW6801;
+ dev->board_virqmask = TW68_VID_INTS | TW68_VID_INTSX;
+ break;
+ case PCI_DEVICE_ID_6804: /* Video decoder for TW6804 */
+ dev->vdecoder = TW6804;
+ dev->board_virqmask = TW68_VID_INTS | TW68_VID_INTSX;
+ break;
+ default:
+ dev->vdecoder = TWXXXX; /* To be announced */
+ dev->board_virqmask = TW68_VID_INTS | TW68_VID_INTSX;
+ break;
+ }
+
+ /* get mmio */
+ if (!request_mem_region(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0),
+ dev->name)) {
+ err = -EBUSY;
+ pr_err("%s: can't get MMIO memory @ 0x%llx\n",
+ dev->name,
+ (unsigned long long)pci_resource_start(pci_dev, 0));
+ goto fail1;
+ }
+ dev->lmmio = ioremap(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+ dev->bmmio = (__u8 __iomem *)dev->lmmio;
+ if (NULL == dev->lmmio) {
+ err = -EIO;
+ pr_err("%s: can't ioremap() MMIO memory\n",
+ dev->name);
+ goto fail2;
+ }
+ /* initialize hardware #1 */
+ /* Then do any initialisation wanted before interrupts are on */
+ tw68_hw_init1(dev);
+
+ /* get irq */
+ err = devm_request_irq(&pci_dev->dev, pci_dev->irq, tw68_irq,
+ IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+ if (err < 0) {
+ pr_err("%s: can't get IRQ %d\n",
+ dev->name, pci_dev->irq);
+ goto fail3;
+ }
+
+ /*
+ * Now do remainder of initialisation, first for
+ * things unique for this card, then for general board
+ */
+ if (dev->instance < TW68_MAXBOARDS)
+ vidnr = video_nr[dev->instance];
+ /* initialise video function first */
+ err = tw68_video_init2(dev, vidnr);
+ if (err < 0) {
+ pr_err("%s: can't register video device\n",
+ dev->name);
+ goto fail4;
+ }
+ tw_setl(TW68_INTMASK, dev->pci_irqmask);
+
+ pr_info("%s: registered device %s\n",
+ dev->name, video_device_node_name(&dev->vdev));
+
+ return 0;
+
+fail4:
+ video_unregister_device(&dev->vdev);
+fail3:
+ iounmap(dev->lmmio);
+fail2:
+ release_mem_region(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+fail1:
+ v4l2_device_unregister(&dev->v4l2_dev);
+ return err;
+}
+
+static void tw68_finidev(struct pci_dev *pci_dev)
+{
+ struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+ struct tw68_dev *dev =
+ container_of(v4l2_dev, struct tw68_dev, v4l2_dev);
+
+ /* shutdown subsystems */
+ tw_clearl(TW68_DMAC, TW68_DMAP_EN | TW68_FIFO_EN);
+ tw_writel(TW68_INTMASK, 0);
+
+ /* unregister */
+ video_unregister_device(&dev->vdev);
+ v4l2_ctrl_handler_free(&dev->hdl);
+
+ /* release resources */
+ iounmap(dev->lmmio);
+ release_mem_region(pci_resource_start(pci_dev, 0),
+ pci_resource_len(pci_dev, 0));
+
+ v4l2_device_unregister(&dev->v4l2_dev);
+}
+
+#ifdef CONFIG_PM
+
+static int tw68_suspend(struct pci_dev *pci_dev , pm_message_t state)
+{
+ struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+ struct tw68_dev *dev = container_of(v4l2_dev,
+ struct tw68_dev, v4l2_dev);
+
+ tw_clearl(TW68_DMAC, TW68_DMAP_EN | TW68_FIFO_EN);
+ dev->pci_irqmask &= ~TW68_VID_INTS;
+ tw_writel(TW68_INTMASK, 0);
+
+ synchronize_irq(pci_dev->irq);
+
+ pci_save_state(pci_dev);
+ pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state));
+ vb2_discard_done(&dev->vidq);
+
+ return 0;
+}
+
+static int tw68_resume(struct pci_dev *pci_dev)
+{
+ struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev);
+ struct tw68_dev *dev = container_of(v4l2_dev,
+ struct tw68_dev, v4l2_dev);
+ struct tw68_buf *buf;
+ unsigned long flags;
+
+ pci_set_power_state(pci_dev, PCI_D0);
+ pci_restore_state(pci_dev);
+
+ /* Do things that are done in tw68_initdev ,
+ except of initializing memory structures.*/
+
+ msleep(100);
+
+ tw68_set_tvnorm_hw(dev);
+
+ /*resume unfinished buffer(s)*/
+ spin_lock_irqsave(&dev->slock, flags);
+ buf = container_of(dev->active.next, struct tw68_buf, list);
+
+ tw68_video_start_dma(dev, buf);
+
+ spin_unlock_irqrestore(&dev->slock, flags);
+
+ return 0;
+}
+#endif
+
+/* ----------------------------------------------------------- */
+
+static struct pci_driver tw68_pci_driver = {
+ .name = "tw68",
+ .id_table = tw68_pci_tbl,
+ .probe = tw68_initdev,
+ .remove = tw68_finidev,
+#ifdef CONFIG_PM
+ .suspend = tw68_suspend,
+ .resume = tw68_resume
+#endif
+};
+
+module_pci_driver(tw68_pci_driver);

Privacy Policy