aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/au0828/au0828-cards.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/au0828/au0828-cards.c')
-rw-r--r--drivers/media/usb/au0828/au0828-cards.c36
1 files changed, 16 insertions, 20 deletions
diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c
index 2c6b7da..9eb77ac 100644
--- a/drivers/media/usb/au0828/au0828-cards.c
+++ b/drivers/media/usb/au0828/au0828-cards.c
@@ -46,6 +46,8 @@ struct au0828_board au0828_boards[] = {
.name = "Hauppauge HVR850",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
+ .has_ir_i2c = 1,
+ .has_analog = 1,
.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
.input = {
{
@@ -72,12 +74,7 @@ struct au0828_board au0828_boards[] = {
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x61,
.has_ir_i2c = 1,
- /* The au0828 hardware i2c implementation does not properly
- support the xc5000's i2c clock stretching. So we need to
- lower the clock frequency enough where the 15us clock
- stretch fits inside of a normal clock cycle, or else the
- au0828 fails to set the STOP bit. A 30 KHz clock puts the
- clock pulse width at 18us */
+ .has_analog = 1,
.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
.input = {
{
@@ -101,20 +98,20 @@ struct au0828_board au0828_boards[] = {
},
[AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = {
.name = "Hauppauge HVR950Q rev xxF8",
- .tuner_type = UNSET,
- .tuner_addr = ADDR_UNSET,
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x61,
.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
.name = "DViCO FusionHDTV USB",
- .tuner_type = UNSET,
- .tuner_addr = ADDR_UNSET,
+ .tuner_type = TUNER_XC5000,
+ .tuner_addr = 0x61,
.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
[AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
.name = "Hauppauge Woodbury",
- .tuner_type = UNSET,
- .tuner_addr = ADDR_UNSET,
+ .tuner_type = TUNER_NXP_TDA18271,
+ .tuner_addr = 0x60,
.i2c_clk_divider = AU0828_I2C_CLK_250KHZ,
},
};
@@ -142,8 +139,7 @@ int au0828_tuner_callback(void *priv, int component, int command, int arg)
mdelay(10);
return 0;
} else {
- printk(KERN_ERR
- "%s(): Unknown command.\n", __func__);
+ pr_err("%s(): Unknown command.\n", __func__);
return -EINVAL;
}
break;
@@ -177,12 +173,12 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
break;
default:
- printk(KERN_WARNING "%s: warning: "
- "unknown hauppauge model #%d\n", __func__, tv.model);
+ pr_warn("%s: warning: unknown hauppauge model #%d\n",
+ __func__, tv.model);
break;
}
- printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n",
+ pr_info("%s: hauppauge eeprom: model=%d\n",
__func__, tv.model);
}
@@ -228,16 +224,16 @@ void au0828_card_analog_fe_setup(struct au0828_dev *dev)
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"au8522", 0x8e >> 1, NULL);
if (sd == NULL)
- printk(KERN_ERR "analog subdev registration failed\n");
+ pr_err("analog subdev registration failed\n");
}
/* Setup tuners */
- if (dev->board.tuner_type != TUNER_ABSENT) {
+ if (dev->board.tuner_type != TUNER_ABSENT && dev->board.has_analog) {
/* Load the tuner module, which does the attach */
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"tuner", dev->board.tuner_addr, NULL);
if (sd == NULL)
- printk(KERN_ERR "tuner subdev registration fail\n");
+ pr_err("tuner subdev registration fail\n");
tun_setup.mode_mask = mode_mask;
tun_setup.type = dev->board.tuner_type;

Privacy Policy