aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-10-28[media] lgdt3306a: Minor source code cleanupslgdt3306aMauro Carvalho Chehab2-21/+12
Fix a few minor CodingStyle issues at the source code: - Use proper multi-line comments; - Align the log tables; - Remove the .type from dvb_frontend_ops, since this is not needed anymore (since the drivers conversion to DVBv5); - Remove emacs format macro. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: Break long linesMauro Carvalho Chehab1-43/+91
Fix most of checkpatch warnings like: WARNING: line over 80 characters Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: constify log tablesMauro Carvalho Chehab1-5/+9
Ideally, we should be replacing this function by intlog10(). While we don't do that, let's at least constify the tables, in order to remove its code footfrint, and get rid of nelems. This also fixes a few 80-cols CodingStyle warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lbdt3306a: remove uneeded bracesMauro Carvalho Chehab1-3/+2
WARNING: braces {} are not necessary for any arm of this statement + if (ret == 0) { [...] + } else { [...] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: Don't use else were not neededMauro Carvalho Chehab1-6/+6
Get rid of the remaining checkpatch.pl warnings: WARNING: braces {} are not necessary for any arm of this statement Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lbdt3306a: simplify the lock status checkMauro Carvalho Chehab1-36/+24
The logic there is too complex and it looks like an inifite loop. So, simplify the logic and implement it as a for loop. This gets rid of the following checkpatch.pl warnings: WARNING: else is not generally useful after a break or return + return LG3306_UNLOCK; + } else { WARNING: else is not generally useful after a break or return + return LG3306_UNLOCK; + } else { Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lbdt3306a: rework at printk macrosMauro Carvalho Chehab1-83/+89
Use pr_foo() where there's a direct replacement. For debug, use custom-made macros, for now, as there are 3 different debug levels. We should get rid of those some day, specially since several such macros can be just removed, as Kernel trace would provide about the same output. This gets rid of some checkpatch errors: WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... +#define lg_info(fmt, arg...) printk(KERN_INFO "lgdt3306a: " fmt, ##arg) ERROR: Macros with complex values should be enclosed in parentheses +#define lg_dbg(fmt, arg...) if (debug & DBG_INFO) \ + lg_printk(KERN_DEBUG, fmt, ##arg) ERROR: Macros with complex values should be enclosed in parentheses +#define lg_reg(fmt, arg...) if (debug & DBG_REG) \ + lg_printk(KERN_DEBUG, fmt, ##arg) Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: Remove FSF addressMauro Carvalho Chehab2-10/+1
Fix this CodingStyle error: ERROR: Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so ag$ #56: FILE: drivers/media/dvb-frontends/lgdt3306a.c:19: + * along with this program; if not, write to the Free Software$ Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: properly handle I/O errorsMauro Carvalho Chehab1-5/+79
Fixes the following smatch errors: drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_set_if': drivers/media/dvb-frontends/lgdt3306a.c:695:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_monitor_vsb': drivers/media/dvb-frontends/lgdt3306a.c:1033:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_oper_mode': drivers/media/dvb-frontends/lgdt3306a.c:1082:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_lock_status': drivers/media/dvb-frontends/lgdt3306a.c:1109:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_check_neverlock_status': drivers/media/dvb-frontends/lgdt3306a.c:1185:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_pre_monitoring': drivers/media/dvb-frontends/lgdt3306a.c:1199:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ drivers/media/dvb-frontends/lgdt3306a.c: In function 'lgdt3306a_get_packet_error': drivers/media/dvb-frontends/lgdt3306a.c:1310:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret; ^ Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: don't go past the bufferMauro Carvalho Chehab1-8/+10
As warned by smatch: drivers/media/dvb-frontends/lgdt3306a.c:1354 log10_x1000() error: buffer overflow 'valx_x10' 14 <= 14 drivers/media/dvb-frontends/lgdt3306a.c:1355 log10_x1000() error: buffer overflow 'log10x_x1000' 14 <= 14 There's a potential of returning a value out of the buffer. Fix it. While here, remove the ugly braced block. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: one bit fields should be unsignedMauro Carvalho Chehab1-2/+2
Fix two smatch warnings: drivers/media/dvb-frontends/lgdt3306a.h:53:28: error: dubious one-bit signed bitfield drivers/media/dvb-frontends/lgdt3306a.h:56:33: error: dubious one-bit signed bitfield Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: Use IS_ENABLED() for attach functionMauro Carvalho Chehab2-6/+4
Simplify the check if CONFIG_DVB_LGDT3306A is enabled, use the IS_ENABLED() macro, just like the other frontend modules. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: Use hexadecimal values in lowercaseMauro Carvalho Chehab1-230/+230
While this is not a mandatory rule at the CodingStyle, we prefer hexadecimal values in lowercase. Currently, there's a mix of lowercase and uppercase ons at lgdt3306a. So, convert all to lowercase with this small script: perl -ne 'if (m,0x([\dA-F]+),) { $o=$1; $n=lc $1; s,0x($o),0x$n, } print $_' Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: more small whitespace cleanupsMichael Ira Krufky1-8/+8
Just CodingStyle. No functional changes. Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: typo fixMichael Ira Krufky1-1/+1
fix WARNING: 'supress' may be misspelled - perhaps 'suppress'? Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: fix WARNING: please, no spaces at the start of a lineMichael Ira Krufky1-221/+221
Properly indent register initialization tables. Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: fix ERROR: do not use C99 // commentsMichael Ira Krufky1-224/+224
Replace C99 comments by /* */ blocks. Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: do not add new typedefsMichael Ira Krufky1-32/+31
We should not be using typedefs at the Kernel, as this makes harder for reviewers to understand the code. Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: fix ERROR: do not use assignment in if conditionMichael Ira Krufky1-1/+2
Just CodingStyle fix. Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: move EXPORT_SYMBOL to be just after functionMichael Ira Krufky1-2/+1
Fixes CodingStyle error: WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable. Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: remove unnecessary 'else'Michael Ira Krufky1-1/+1
No need for an else, as the previous if will return. Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] lgdt3306a: clean up whitespace & unneeded bracketsMichael Ira Krufky2-316/+329
No functional changes. Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28[media] DVB: add support for LG Electronics LGDT3306A ATSC/QAM-B DemodulatorFred Richter4-0/+2114
This ATSC/QAM-B demodulator is used by several new devices. Add support for it. Other patches will fix CodingStyle issues. Signed-off-by: Fred Richter <frichter@hauppauge.com> Signed-off-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-28Merge remote-tracking branch 'linus/master' into patchworkMauro Carvalho Chehab503-4968/+15236
Merge back media fixes applied upstream. * linus/master: (457 commits) Linux 3.18-rc2 ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo overlayfs: embed middle into overlay_readdir_data overlayfs: embed root into overlay_readdir_data overlayfs: make ovl_cache_entry->name an array instead of pointer overlayfs: don't hold ->i_mutex over opening the real directory arm64: Fix memblock current_limit with 64K pages and 48-bit VA sparc64: Implement __get_user_pages_fast(). sparc64: Fix register corruption in top-most kernel stack frame during boot. arm64: ASLR: Don't randomise text when randomise_va_space == 0 [media] s5p-jpeg: Avoid -Wuninitialized warning in s5p_jpeg_parse_hdr [media] s5p-fimc: Only build suspend/resume for PM [media] s5p-jpeg: Only build suspend/resume for PM [media] Remove references to non-existent PLAT_S5P symbol MIPS: SEAD3: Fix I2C device registration. [media] videobuf-dma-contig: set vm_pgoff to be zero to pass the sanity check in vm_iomap_memory() [media] tw68: remove bogus I2C_ALGOBIT dependency kvm: vfio: fix unregister kvm_device_ops of vfio KVM: x86: Wrong assertion on paging_tmpl.h ...
2014-10-27Merge tag 'media/v3.18-rc2' of ↵Linus Torvalds25-27/+62
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A series of driver fixes: - a few compilation fixes with randconfigs - one potential compilation breakage on userspace due to the usage of a gcc extension - several warnings fixed - some other random driver fixes" * tag 'media/v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (22 commits) [media] s5p-jpeg: Avoid -Wuninitialized warning in s5p_jpeg_parse_hdr [media] s5p-fimc: Only build suspend/resume for PM [media] s5p-jpeg: Only build suspend/resume for PM [media] Remove references to non-existent PLAT_S5P symbol [media] videobuf-dma-contig: set vm_pgoff to be zero to pass the sanity check in vm_iomap_memory() [media] tw68: remove bogus I2C_ALGOBIT dependency [media] usbvision-video: two use after frees [media] tw68: remove deprecated IRQF_DISABLED [media] xc5000: use after free in release() [media] em28xx-input: NULL dereference on error [media] wl128x: fix fmdbg compiler warning Revert "[media] v4l2-dv-timings: fix a sparse warning" [media] hackrf: harmless off by one in debug code [media] cx23885: initialize config structs for T9580 [media] v4l: uvcvideo: Fix buffer completion size check [media] vivid: fix buffer overrun [media] saa7146: Create a device name before it's used [media] em28xx: fix uninitialized variable warning [media] vivid: fix Kconfig FB dependency [media] anysee: make sure loading modules is const ...
2014-10-27Merge tag 'edac_fixes_for_3.18' of ↵Linus Torvalds4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fixes from Borislav Petkov: "Correct severity of reported errors in several EDAC drivers. From Jason Baron" * tag 'edac_fixes_for_3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: e7xxx_edac: Report CE events properly cpc925_edac: Report UE events properly i82860_edac: Report CE events properly i3200_edac: Report CE events properly
2014-10-27Merge tag 'spi-v3.18-rc2' of ↵Linus Torvalds5-41/+93
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "Quite a few driver fixes in here, including some fairly substantial ones for the recently added Rockchip driver, plus a fix for spidev to more reliably support bidirectional transfers which is fairly large but basically mechanical. It's a bit more code than I'd like but all fixes" * tag 'spi-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: orion: fix potential NULL pointer de-reference spi/rockchip: spi controller must be disabled in tx callback too spi/rockchip: fix bug that cause spi transfer timed out in DMA duplex mode spi/rockchip: fix bug that case spi can't go as fast as slave request spi: pl022: Fix incorrect dma_unmap_sg spi: spidev: Use separate TX and RX bounce buffers spi: dw: Initialize of_node to discover DT node children
2014-10-27Merge tag 'regulator-v3.18-rc2' of ↵Linus Torvalds2-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of fixes for v3.18, one fix for an incorrect voltage to register mapping in the rk808 driver and a fix for a build failure in some SH defconfigs" * tag 'regulator-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Include err.h from consumer.h to fix build failure regulator: rk808: Fix min_uV for DCDC1 & DCDC2
2014-10-27Merge remote-tracking branches 'spi/fix/dw', 'spi/fix/orion', ↵Mark Brown5-41/+93
'spi/fix/pl022', 'spi/fix/rockchip' and 'spi/fix/spidev' into spi-linus
2014-10-27Merge remote-tracking branch 'regulator/fix/rk808' into regulator-linusMark Brown1-1/+1
2014-10-27Merge remote-tracking branch 'regulator/fix/core' into regulator-linusMark Brown1-0/+2
2014-10-26Linux 3.18-rc2Linus Torvalds1-1/+1
2014-10-26Merge tag 'armsoc-for-rc2' of ↵Linus Torvalds18-46/+107
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another week, another small batch of fixes. Most of these make zynq, socfpga and sunxi platforms work a bit better: - due to new requirements for regulators, DWMMC on socfpga broke past v3.17 - SMP spinup fix for socfpga - a few DT fixes for zynq - another option (FIXED_REGULATOR) for sunxi is needed that used to be selected by other options but no longer is. - a couple of small DT fixes for at91 - ...and a couple for i.MX" * tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE ARM: dts: socfpga: Add a 3.3V fixed regulator node ARM: dts: socfpga: Fix SD card detect ARM: dts: socfpga: rename gpio nodes ARM: at91/dt: sam9263: fix PLLB frequencies power: reset: at91-reset: fix power down register MAINTAINERS: add atmel ssc driver maintainer entry arm: socfpga: fix fetching cpu1start_addr for SMP ARM: zynq: DT: trivial: Fix mc node ARM: zynq: DT: Add cadence watchdog node ARM: zynq: DT: Add missing reference for memory-controller ARM: zynq: DT: Add missing reference for ADC ARM: zynq: DT: Add missing address for L2 pl310 ARM: zynq: DT: Remove 222 MHz OPP ARM: zynq: DT: Fix GEM register area size
2014-10-26Merge branch 'for-linus' of ↵Linus Torvalds27-58/+3814
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "overlayfs merge + leak fix for d_splice_alias() failure exits" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: overlayfs: embed middle into overlay_readdir_data overlayfs: embed root into overlay_readdir_data overlayfs: make ovl_cache_entry->name an array instead of pointer overlayfs: don't hold ->i_mutex over opening the real directory fix inode leaks on d_splice_alias() failure exits fs: limit filesystem stacking depth overlay: overlay filesystem documentation overlayfs: implement show_options overlayfs: add statfs support overlay filesystem shmem: support RENAME_WHITEOUT ext4: support RENAME_WHITEOUT vfs: add RENAME_WHITEOUT vfs: add whiteout support vfs: export check_sticky() vfs: introduce clone_private_mount() vfs: export __inode_permission() to modules vfs: export do_splice_direct() to modules vfs: add i_op->dentry_open()
2014-10-25Merge tag 'imx-fixes-3.18' of ↵Olof Johansson3-12/+11
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.18" from Shawn Guo: The i.MX fixes for 3.18: - Revert one patch which increases I2C bus frequency on imx28-evk - Fix a typo on imx6q EIM clock name * tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx28-evk: Let i2c0 run at 100kHz ARM: i.MX6: Fix "emi" clock name typo Signed-off-by: Olof Johansson <olof@lixom.net>
2014-10-25ARM: dts: imx28-evk: Let i2c0 run at 100kHzFabio Estevam1-1/+0
Commit 78b81f4666fb ("ARM: dts: imx28-evk: Run I2C0 at 400kHz") caused issues when doing the following sequence in loop: - Boot the kernel - Perform audio playback - Reboot the system via 'reboot' command In many times the audio card cannot be probed, which causes playback to fail. After restoring to the original i2c0 frequency of 100kHz there is no such problem anymore. This reverts commit 78b81f4666fbb22a20b1e63e5baf197ad2e90e88. Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-25ARM: i.MX6: Fix "emi" clock name typoSteve Longerbeam2-11/+11
Fix a typo error, the "emi" names refer to the eim clocks. The change fixes typo in EIM and EIM_SLOW pre-output dividers and selectors clock names. Notably EIM_SLOW clock itself is named correctly. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> [vladimir_zapolskiy@mentor.com: ported to v3.17] Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-10-24overlayfs: embed middle into overlay_readdir_dataAl Viro1-7/+5
same story... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24overlayfs: embed root into overlay_readdir_dataAl Viro1-6/+5
no sense having it a pointer - all instances have it pointing to local variable in the same stack frame Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24overlayfs: make ovl_cache_entry->name an array instead of pointerAl Viro1-6/+5
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24overlayfs: don't hold ->i_mutex over opening the real directoryAl Viro1-6/+13
just use it to serialize the assignment Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds22-575/+30
Pull MIPS fixes from Ralf Baechle: "This is the first round of fixes and tying up loose ends for MIPS. - plenty of fixes for build errors in specific obscure configurations - remove redundant code on the Lantiq platform - removal of a useless SEAD I2C driver that was causing a build issue - fix an earlier TLB exeption handler fix to also work on Octeon. - fix ISA level dependencies in FPU emulator's instruction decoding. - don't hardcode kernel command line in Octeon software emulator. - fix an earlier fix for the Loondson 2 clock setting" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: SEAD3: Fix I2C device registration. MIPS: SEAD3: Nuke PIC32 I2C driver. MIPS: ftrace: Fix a microMIPS build problem MIPS: MSP71xx: Fix build error MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled MIPS: Prevent compiler warning from cop2_{save,restore} MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle MIPS: idle: Remove leftover __pastwait symbol and its references MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds MIPS: ptrace.h: Add a missing include MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present MIPS: Octeon: Remove special case for simulator command line. MIPS: tlbex: Properly fix HUGE TLB Refill exception handler MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge pci: pci-lantiq: remove duplicate check on resource MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions
2014-10-24Merge tag 'arm64-fixes' of ↵Linus Torvalds13-32/+160
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - enable 48-bit VA space now that KVM has been fixed, together with a couple of fixes for pgd allocation alignment and initial memblock current_limit. There is still a dependency on !ARM_SMMU which needs to be updated as it uses the page table manipulation macros of the host kernel - eBPF fixes following changes/conflicts during the merging window - Compat types affecting compat_elf_prpsinfo - Compilation error on UP builds - ASLR fix when /proc/sys/kernel/randomize_va_space == 0 - DT definitions for CLCD support on ARMv8 model platform * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix memblock current_limit with 64K pages and 48-bit VA arm64: ASLR: Don't randomise text when randomise_va_space == 0 arm64: vexpress: Add CLCD support to the ARMv8 model platform arm64: Fix compilation error on UP builds Documentation/arm64/memory.txt: fix typo net: bpf: arm64: minor fix of type in jited arm64: bpf: add 'load 64-bit immediate' instruction arm64: bpf: add 'shift by register' instructions net: bpf: arm64: address randomize and write protect JIT code arm64: mm: Correct fixmap pagetable types arm64: compat: fix compat types affecting struct compat_elf_prpsinfo arm64: Align less than PAGE_SIZE pgds naturally arm64: Allow 48-bits VA space without ARM_SMMU
2014-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds11-62/+70
Pull two sparc fixes from David Miller: 1) Fix boots with gcc-4.9 compiled sparc64 kernels. 2) Add missing __get_user_pages_fast() on sparc64 to fix hangs on futexes used in transparent hugepage areas. It's really idiotic to have a weak symbolled fallback that just returns zero, and causes this kind of bug. There should be no backup implementation and the link should fail if the architecture fails to provide __get_user_pages_fast() and supports transparent hugepages. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Implement __get_user_pages_fast(). sparc64: Fix register corruption in top-most kernel stack frame during boot.
2014-10-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-85/+282
Pull kvm fixes from Paolo Bonzini: "This is a pretty large update. I think it is roughly as big as what I usually had for the _whole_ rc period. There are a few bad bugs where the guest can OOPS or crash the host. We have also started looking at attack models for nested virtualization; bugs that usually result in the guest ring 0 crashing itself become more worrisome if you have nested virtualization, because the nested guest might bring down the non-nested guest as well. For current uses of nested virtualization these do not really have a security impact, but you never know and bugs are bugs nevertheless. A lot of these bugs are in 3.17 too, resulting in a large number of stable@ Ccs. I checked that all the patches apply there with no conflicts" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vfio: fix unregister kvm_device_ops of vfio KVM: x86: Wrong assertion on paging_tmpl.h kvm: fix excessive pages un-pinning in kvm_iommu_map error path. KVM: x86: PREFETCH and HINT_NOP should have SrcMem flag KVM: x86: Emulator does not decode clflush well KVM: emulate: avoid accessing NULL ctxt->memopp KVM: x86: Decoding guest instructions which cross page boundary may fail kvm: x86: don't kill guest on unknown exit reason kvm: vmx: handle invvpid vm exit gracefully KVM: x86: Handle errors when RIP is set during far jumps KVM: x86: Emulator fixes for eip canonical checks on near branches KVM: x86: Fix wrong masking on relative jump/call KVM: x86: Improve thread safety in pit KVM: x86: Prevent host from panicking on shared MSR writes. KVM: x86: Check non-canonical addresses upon WRMSR
2014-10-24Merge tag 'stable/for-linus-3.18-b-rc1-tag' of ↵Linus Torvalds7-74/+50
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - Fix regression in xen_clocksource_read() which caused all Xen guests to crash early in boot. - Several fixes for super rare race conditions in the p2m. - Assorted other minor fixes. * tag 'stable/for-linus-3.18-b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/pci: Allocate memory for physdev_pci_device_add's optarr x86/xen: panic on bad Xen-provided memory map x86/xen: Fix incorrect per_cpu accessor in xen_clocksource_read() x86/xen: avoid race in p2m handling x86/xen: delay construction of mfn_list_list x86/xen: avoid writing to freed memory after race in p2m handling xen/balloon: Don't continue ballooning when BP_ECANCELED is encountered
2014-10-24Merge tag 'sound-3.18-rc2' of ↵Linus Torvalds5-18/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here are a chunk of small fixes since rc1: two PCM core fixes, one is a long-standing annoyance about lockdep and another is an ARM64 mmap fix. The rest are a HD-audio HDMI hotplug notification fix, a fix for missing NULL termination in Realtek codec quirks and a few new device/codec-specific quirks as usual" * tag 'sound-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add missing terminating entry to SND_HDA_PIN_QUIRK macro ALSA: pcm: Fix false lockdep warnings ALSA: hda - Fix inverted LED gpio setup for Lenovo Ideapad ALSA: hda - hdmi: Fix missing ELD change event on plug/unplug ALSA: usb-audio: Add support for Steinberg UR22 USB interface ALSA: ALC283 codec - Avoid pop noise on headphones during suspend/resume ALSA: pcm: use the same dma mmap codepath both for arm and arm64
2014-10-24Merge tag 'random_for_linus' of ↵Linus Torvalds10-19/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull /dev/random updates from Ted Ts'o: "This adds a memzero_explicit() call which is guaranteed not to be optimized away by GCC. This is important when we are wiping cryptographically sensitive material" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: crypto: memzero_explicit - make sure to clear out sensitive data random: add and use memzero_explicit() for clearing data
2014-10-24Merge tag 'pm+acpi-3.18-rc2' of ↵Linus Torvalds36-150/+527
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "This is material that didn't make it to my 3.18-rc1 pull request for various reasons, mostly related to timing and travel (LinuxCon EU / LPC) plus a couple of fixes for recent bugs. The only really new thing here is the PM QoS class for memory bandwidth, but it is simple enough and users of it will be added in the next cycle. One major change in behavior is that platform devices enumerated by ACPI will use 32-bit DMA mask by default. Also included is an ACPICA update to a new upstream release, but that's mostly cleanups, changes in tools and similar. The rest is fixes and cleanups mostly. Specifics: - Fix for a recent PCI power management change that overlooked the fact that some IRQ chips might not be able to configure PCIe PME for system wakeup from Lucas Stach. - Fix for a bug introduced in 3.17 where acpi_device_wakeup() is called with a wrong ordering of arguments from Zhang Rui. - A bunch of intel_pstate driver fixes (all -stable candidates) from Dirk Brandewie, Gabriele Mazzotta and Pali Rohár. - Fixes for a rather long-standing problem with the OOM killer and the freezer that frozen processes killed by the OOM do not actually release any memory until they are thawed, so OOM-killing them is rather pointless, with a couple of cleanups on top (Michal Hocko, Cong Wang, Rafael J Wysocki). - ACPICA update to upstream release 20140926, inlcuding mostly cleanups reducing differences between the upstream ACPICA and the kernel code, tools changes (acpidump, acpiexec) and support for the _DDN object (Bob Moore, Lv Zheng). - New PM QoS class for memory bandwidth from Tomeu Vizoso. - Default 32-bit DMA mask for platform devices enumerated by ACPI (this change is mostly needed for some drivers development in progress targeted at 3.19) from Heikki Krogerus. - ACPI EC driver cleanups, mostly related to debugging, from Lv Zheng. - cpufreq-dt driver updates from Thomas Petazzoni. - powernv cpuidle driver update from Preeti U Murthy" * tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) intel_pstate: Correct BYT VID values. intel_pstate: Fix BYT frequency reporting intel_pstate: Don't lose sysfs settings during cpu offline cpufreq: intel_pstate: Reflect current no_turbo state correctly cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy PCI / PM: handle failure to enable wakeup on PCIe PME ACPI: invoke acpi_device_wakeup() with correct parameters PM / freezer: Clean up code after recent fixes PM: convert do_each_thread to for_each_process_thread OOM, PM: OOM killed task shouldn't escape PM suspend freezer: remove obsolete comments in __thaw_task() freezer: Do not freeze tasks killed by OOM killer ACPI / platform: provide default DMA mask cpuidle: powernv: Populate cpuidle state details by querying the device-tree cpufreq: cpufreq-dt: adjust message related to regulators cpufreq: cpufreq-dt: extend with platform_data cpufreq: allow driver-specific data ACPI / EC: Cleanup coding style. ACPI / EC: Refine event/query debugging messages. ...
2014-10-24Merge branch 'next' of ↵Linus Torvalds31-422/+2222
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ...

Privacy Policy