aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-05-25[media] omap3isp: Rename isp_buffer isp_addr field to dmaomap3ispLaurent Pinchart7-17/+17
No functional changes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: Move to videobuf2Laurent Pinchart6-1287/+109
Replace the custom buffers queue implementation with a videobuf2 queue. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] v4l: vb2: Add a function to discard all DONE buffersLaurent Pinchart2-0/+25
When suspending a device while a video stream is active all buffers marked as done but not dequeued yet will be kept across suspend and given back to userspace after resume. This will result in outdated buffers being dequeued. Introduce a new vb2 function to mark all done buffers as erroneous instead, to be used by drivers at resume time. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: Cancel all queued buffers when stopping the video streamLaurent Pinchart1-0/+2
When stopping a video stream the driver waits for ongoing DMA opeations to complete for the currently active buffer, but doesn't release the non-active queued buffers. This isn't a problem in most cases as the video device is usually closed after the stream is stopped, which will release all the buffers. However the problem would generate a warning when switching to videobuf2. Fix it by cancelling all buffers after DMA operations have completed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: Move buffer irqlist to isp_buffer structureLaurent Pinchart3-21/+22
This prepares for the move to videobuf2. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: Move queue irqlock to isp_video structureLaurent Pinchart5-27/+19
This prepares for the move to videobuf2. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: Move queue mutex to isp_video structureLaurent Pinchart4-91/+86
This prepares for the move to videobuf2. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: queue: Don't build scatterlist for kernel bufferLaurent Pinchart2-25/+7
The scatterlist is not needed for those buffers, don't build it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: Use the ARM DMA IOMMU-aware operationsLaurent Pinchart5-61/+89
Attach an ARM DMA I/O virtual address space to the ISP device. This switches to the IOMMU-aware ARM DMA backend, we can thus remove the explicit calls to the OMAP IOMMU map and unmap functions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: queue: Use sg_alloc_table_from_pages()Laurent Pinchart1-14/+2
Replace the custom implementation with a call to the scatterlist helper function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: queue: Map PFNMAP buffers to deviceLaurent Pinchart2-18/+23
Userspace PFNMAP buffers need to be mapped to the device like the userspace non-PFNMAP buffers in order for the DMA mapping implementation to create IOMMU mappings when we'll switch to the IOMMU-aware DMA mapping backend. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: queue: Fix the dma_map_sg() return value checkLaurent Pinchart1-1/+1
dma_map_sg() can merge sglist entries, and can thus return a number of mapped entries different than the original value. Don't consider this as an error. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: queue: Allocate kernel buffers with dma_alloc_coherentLaurent Pinchart2-32/+27
And retrieve the related sg table using dma_get_sgtable(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: queue: Inline the ispmmu_v(un)map functionsLaurent Pinchart1-32/+4
The ispmmu_vmap() and ispmmu_vunmap() functions are just wrappers around omap_iommu_vmap() and omap_iommu_vunmap(). Inline them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: queue: Merge the prepare and sglist functionsLaurent Pinchart2-104/+69
In preparation for the switch to the DMA API merge the two functions that handle buffer preparation for the USERPTR cases (both page-backed and non page-backed memory). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: queue: Use sg_table structureLaurent Pinchart2-74/+40
Replace the sglen and sglist fields stored in the buffer structure with an sg_table. This allows using the sg table allocation helper function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: queue: Move IOMMU handling code to the queueLaurent Pinchart3-83/+78
As a preparation for the switch from the OMAP IOMMU API to the DMA API move all IOMMU handling code from the video node implementation to the buffers queue implementation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: video: Set the buffer bytesused field at completion timeLaurent Pinchart1-1/+4
The v4l buffer bytesused field is a value that will be returned to userspace when the buffer gets dequeued. As such it doesn't need to be set early at buffer queue time. Move the assignment to buffer completion in the omap3isp_video_buffer_next() function to prepare for the video buffers queue refactoring. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: ccdc: Use the DMA API for FPCLaurent Pinchart2-24/+35
Replace the OMAP-specific IOMMU API usage by the DMA API for FPC. The table is now allocated using dma_alloc_coherent() and the related sg table is retrieved using dma_get_sgtable() for sync operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: ccdc: Use the DMA API for LSCLaurent Pinchart2-31/+29
Replace the OMAP-specific IOMMU API usage by the DMA API for LSC. The table is now allocated using dma_alloc_coherent() and the related sg table is retrieved using dma_get_sgtable() for sync operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: stat: Use the DMA APILaurent Pinchart2-72/+53
Replace the OMAP-specific IOMMU API usage by the DMA API. All buffers are now allocated using dma_alloc_coherent() and the related sg table is retrieved using dma_get_sgtable() for sync operations. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: stat: Store sg table in ispstat_bufferLaurent Pinchart2-11/+10
The driver stores the IOMMU mapped iovm struct pointer in the buffer structure but only needs the iovm sg table. Store the sg table instead to prepare the migration to the DMA API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: stat: Merge dma_addr and iommu_addr fieldsLaurent Pinchart4-15/+11
The fields store buffer addresses as seen from the device. The first one is used with an external DMA engine while the second one is used with the ISP DMA engine. As they're never used together, merge them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: stat: Share common code for buffer allocationLaurent Pinchart1-60/+54
Move code common between the isp_stat_bufs_alloc_dma() and isp_stat_bufs_alloc_iommu() functions to isp_stat_bufs_alloc(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: stat: Remove impossible WARN_ONLaurent Pinchart1-2/+0
The WARN_ON statements in the buffer allocation functions try to catch conditions where buffers would have already been allocated. As the buffers are explicitly freed right before being allocated this can't happen. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25[media] omap3isp: stat: Rename IS_COHERENT_BUF to ISP_STAT_USES_DMAENGINELaurent Pinchart1-7/+7
The macro is meant to test whether the statistics engine uses an external DMA engine to transfer data or supports DMA directly. As both cases will be supported by DMA coherent buffers rename the macro to ISP_STAT_USES_DMAENGINE for improved clarity. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25Merge branch 'arm/omap' of ↵Mauro Carvalho Chehab2-22/+12
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu into topic/omap3isp * 'arm/omap' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/omap: Fix map protection value handling iommu/omap: Remove comment about supporting single page mappings only iommu/omap: Fix 'no page for' debug message in flush_iotlb_page() iommu/omap: Move to_iommu definition from omap-iopgtable.h iommu/omap: Remove omap_iommu_domain_has_cap() function iommu/omap: Correct init value of iotlb_entry valid field
2014-05-24[media] media: stk1160: Avoid stack-allocated buffer for control URBsEzequiel Garcia2-2/+9
Currently stk1160_read_reg() uses a stack-allocated char to get the read control value. This is wrong because usb_control_msg() requires a kmalloc-ed buffer. This commit fixes such issue by kmalloc'ating a 1-byte buffer to receive the read value. While here, let's remove the urb_buf array which was meant for a similar purpose, but never really used. Cc: Alan Stern <stern@rowland.harvard.edu> Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.7 and up Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24[media] v4l: subdev: Move [gs]_std operation to video opsLaurent Pinchart60-91/+107
The g_std and s_std operations are video-related, move them to the video ops where they belong. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24[media] videobuf2-core: remove duplicated codeVictor Lambret1-4/+0
Remove duplicated test of buffer presence at streamon Signed-off-by: Victor Lambret <victor.lambret.ext@parrot.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24[media] media: davinci: vpif: add Copyright messageLad, Prabhakar2-0/+2
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24[media] media: davinci: vpif_capture: drop check __KERNEL__Lad, Prabhakar1-3/+0
Drops check for #ifdef __KERNEL__, because this header is a Kernel only header, where this define is always true. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24[media] media: davinci: vpif_capture: return -ENODATA for *std callsLad, Prabhakar1-1/+23
this patch adds supports to return -ENODATA to *std calls if the selected output does not support it. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24[media] media: davinci: vpif_capture: return -ENODATA for *dv_timings callsLad, Prabhakar1-0/+50
this patch adds suppport to return -ENODATA for *dv_timings calls if the current output does not support it. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24[media] media: davinci: vpif_capture: use SIMPLE_DEV_PM_OPSLad, Prabhakar2-37/+30
this patch uses SIMPLE_DEV_PM_OPS, and drops unneeded members from io_usrs, usrs and makes use of vb2 helepers instead. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24[media] media: davinci: vpif_capture: group v4l2_ioctl_opsLad, Prabhakar1-7/+9
this patch groups the v4l2_ioctl_ops and align them appropriately. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24[media] media: davinci: vpif_capture: drop cropcapLad, Prabhakar1-25/+0
this patch drops cropcap as this driver doesnt support cropping. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-24Revert "[media] media: davinci: vpif_capture: drop unneeded module params"Mauro Carvalho Chehab2-1/+64
This patch removes some modprobe parameters, without any reason or description. I was supposed to not merge this patch, but It was merged by mistake. Revert it while nobody provides a good description for such patch. This reverts commit b952662f272ae43c1583fac4dcda71ef36c33528. Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] tvp5150: Replace container_of() with to_tvp5150()Laurent Pinchart1-2/+2
Use the driver-specific inline function to cast from a subdev pointer to a tvp5150 pointer instead of the generic container_of(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] s5p-mfc: Add support for resolution change eventPawel Osciak2-0/+10
When a resolution change point is reached, queue an event to signal the userspace that a new set of buffers is required before decoding can continue. Signed-off-by: Pawel Osciak <posciak@chromium.org> Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] v4l: Add source change eventArun Kumar K5-0/+101
This event indicates that the video device has encountered a source parameter change during runtime. This can typically be a resolution change detected by a video decoder OR a format change detected by an input connector. This needs to be nofified to the userspace and the application may be expected to reallocate buffers before proceeding. The application can subscribe to events on a specific pad or input port which it is interested in. Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] Staging: dt3155v4l: set error code on failureDan Carpenter1-1/+3
We should be returning -ENOMEM here instead of success. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] bt8xx: make driver routines fit into its own namespcaeLuis R. Rodriguez1-10/+10
There is a few conflicts with older symbols on older kernels so we have to patch this driver when backporting. Instead just make these routines specific to the driver. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] technisat-usb2: rename led enums to be specific to driverLuis R. Rodriguez1-14/+14
The current names clash with include/linux/leds.h namespace, although there is no compile issue currently this does affect backports. Drivers should also try to avoid generic namespaces for things like this. Cc: Felipe Pena <felipensp@gmail.com> Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] Documentation: media: Remove double 'struct'Laurent Pinchart2-5/+5
The XML entities for media structures start with the 'struct' word. Remove duplicate 'struct' from the entity users. Reported-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] media: davinci: vpif_capture: drop unneeded module paramsLad, Prabhakar2-64/+1
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] media: davinci: vpif_capture: initialize the video device in single ↵Lad, Prabhakar1-18/+12
place this patch moves the initalization of video device to a single place and uses macro to define the driver name and use it appropriately on the required places. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] media: davinic: vpif_capture: drop started member from struct common_objLad, Prabhakar2-24/+14
the started member was indicating whether streaming was started or not, this can be determined by vb2 offering, this patch replaces the started member from struct common_obj with appropriate vb2 calls. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] media: davinci: vpif_capture: drop unnecessary field memoryLad, Prabhakar2-10/+0
This field is set, but not used anymore. Remove it. No functional changes. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-23[media] media: davinci: vpif_capture: drop reserving memory for deviceLad, Prabhakar1-18/+0
this patch drops reserving contigiuos memory for the device, as now with CMA support there is no need of this. This patch also prepares to removal of config_params. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

Privacy Policy